Plastic Film CAPACITORS - PDF Free Download

Plastic Film CAPACITORS 2016

Product Line Chart NEW! MLC2 Large capacitance 800 ~ 900V.DC 230 ~ 3,800μF Cylindrical type(dc) Large capacity MLC Standard 900 ~ 1,500V.DC 70 ~ 2,300μF NEW! Cylindrical type(ac) E62 Standard(single phase) Aluminum case 420 ~ 4,000V.AC 0.2 ~ 2,000μF Three Phase NEW! E62-3HF For three phase Aluminum case 640 ~ 1,200V.AC 3 8 ~ 3 140μF P.176~178 P.15 P.170~174 P.10 14 P.196~201 P.32 37 P.202~204 P.38 40 NEW! E51 Low inductance Plastic case 1,300 ~ 50,000V.DC 0.2 ~ 700μF Low Inductance NEW! E51 Low inductance Plastic case 2000 ~ 35,000V.AC 0.13 ~ 5μF P.182,183 P.20,21 P.182,184 P.20,22 NEW! E53H Ultra low inductance Plastic case 500~2,000V.DC 22~400μF Radial Thread NEW! E55 Ultra low inductance Plastic case 800 ~ 5,000V.DC 10 ~ 250μF Ultra Low Inductance NEW! E53 Ultra low inductance Plastic case 280 ~ 2,450V.AC 0.22 ~ 310μF P.190,191 P.26,27 P.192 P.28 P.186~188 P.23 25 Box type NEW! NEW! MKC-P4 Standard(DC) Plastic case 700 ~ 1,100V.DC 7 ~ 80μF E59 Custom design Metal case P.180 Large capacity 500 ~ 25,000V.DC 200 ~ 17,000V.AC P.194,195 P.30,31 3

Product Line Chart Resin encased type - For general electronic devices - For communication devices - For computer control devices - For power circuits MKC Automotive Components product For high temperature MKC-JS High reliability Automotive Components product For large MKC-P Automotive Components product 35 100V.DC 10.0 3.9μF 100V.DC 0.1 ~ 1.5μF 250 450V.DC 1.8 0.47 1.0μF P.210 P.46 P.212 P.47 P.210 P.46 MKC-HD Miniatu rized Automotive Components product 250 ~ 500V.DC 0.1 ~ 50μF MKT, MKT-P For large capacitance Automotive Components product 35 ~ 450V.DC 1 ~ 50μF Because I do not print it in a catalogue, please talk about this form name separately. For ratings that are not described in the table., ask us for further information. Resin dip type MDD-HF high temperature product For high temperature MDDSA Standard product For high frequency MDD-P For high frequency 100, 250V.DC 0.01 ~ 0.33μF 100 ~ 630V.DC 0.01 ~ 10μF 250 ~ 630V.DC 0.027 ~ 1.0μF P.224 P.57 For PFC use only P.216,217 P.52,53 P.226 P.58 High ripple MDD-P(4) High ripple, small-sized product Low noise MDD-HD(4HS) Low noise small-sized product Miniatu rized MDD-HD(4) High ripple, Ultra small-sized product 450V.DC 0.47 ~ 2.2μF 450V.DC 0.47 ~ 2.2μF 450V.DC 0.47 ~ 2.2μF P.222 P.56 P.220 P.55 P.218 P.54 Tape wrapped type For SMD MTBS, MTB Standard product For high frequency MTB-P For high frequency MML-E High reliability, Standard product 100 ~ 630V.DC 0.022 ~ 10μF 250 ~ 630V.DC 0.027 ~ 1.0μF 100, 250V.DC 0.01 ~ 0.22μF P.228 P.60 P.226,227 P.58,59 P.234 P.64 For Large WMTB For large For high frequency & Large WMTB-P High frequency, Large High temperature MMX-EC High temperature product MML-F High voltage High capacity, High voltage 630V.DC 0.22 ~ 2.2μF 1,200 V.DC 0.1 ~ 1.0μF 100V.DC 0.01 ~ 0.22μF 100 ~ 630V.DC 0.01 ~ 1.0μF P.230 P.61 P.230 P.61 Discontinued P.232 P.62 P.236 P.66 4

Product Table Table of plastic film capacitor types Series Features Operating temperature range Standard product Small-sized product High-reliability product Thin-shaped product Operating voltage V. DC Capacitance range μf Page MLC Aluminum encased type, standard product -40~+ 85 900, 1100, 1300, 1500 70~2300 170 10 MLC2 Aluminum encased type, large capacity -40 ~+ 85 800, 900 230~3,800 176 15 MKC-P4 resin encased type, standard product -25~+ 85 (+105 ) 700, 900, 1100 7~80 180 E51 resin encased type, low inductance -25 ~+ 70 1,300~50,000 0.2~700 182 20 E51(AC) resin encased type, low inductance -25 ~+ 70 2,000~35,000 0.13~500 182 20 E53(AC) resin encased type, ultra low inductance -25 ~+ 70 280~2,450 0.22~310 186 23 E53H resin encased type, ultra low inductance -25 ~+ 70 500~2,000 22~400 190 26 E55 resin encased type, ultra low inductance -25 ~+ 70 800~5,000 10~250 192 28 E59 Metal case, custom design -40 ~+ 70 - - 194 30 E62(AC) Aluminum encased type, Standard product -40 ~+ 70 420~4,000 0.2~2,000 196 32 E62-3HF(AC) Aluminum encased type, for three phase -40 ~+ 70 640~1,200 3 8~3 140 202 38 MKC Metallized polyester, resin encased type -40~+ 105(+ 125 ) 35, 100 10.0, 3.9 210 46 MKC-P Metallized polypropylene, resin encased type -40~+ 105 250, 450 1.8, 0.47, 1.0 210 46 MKC-JS Metallized polyester, resin encased type -40~+ 85 (+ 105 ) 100 0.1~1.5 212 47 MDDSA Metallized polyester, resin dip type, small-sized product -40~+ 85 (+ 105 ) 100~630 0.01~10.0 216 52 MDD-HD(4) Metallized polyester, resin dip type, for PFC circuit -40~+ 85 (+ 105 ) 450 0.47~2.2 218 54 MDD-HD(4HS) Metallized polyester, resin dip type, for PFC circuit -40~+ 85 (+ 105 ) 450 0.47~2.2 220 55 MDD-P(4) Metallized polypropylene, resin dip type, for PFC circuit -40~+ 85 450 0.47~2.2 222 56 MDD-HF Metallized PPS film capacitor, resin dip type -40~+ 105 (+ 125 ) 100, 250 0.01~0.33 224 57 MDD-P Metallized polypropylene, resin dip type -40~+ 85 250, 400, 630 0.027~1.0 226 58 MTB-P Metallized polypropylene, tape wrapped type -40~+ 85 250, 400, 630 0.027~1.0 226 58 MTBS MTB Metallized polyester, tape wrapped type -40~+ 85 100~630 0.022~10.0 228 60 WMTB Tape wrapped type for large -40~+ 85 630 0.22~2.2 230 61 WMTB-P Tape wrapped type for high frequency and large -40 ~+ 85 1200 0.1~1.0 230 61 MMX-EC For SMD metallized PPS film capacitors -40~+ 105 (+125 ) Discontinued 100 0.01~0.22 232 62 MML-E For SMD metallized PPS film capacitors -40~+ 105 (+125 ) 100, 250 0.01~0.22 234 64 MML-F For SMD metallized polyester film capacitors -40~+ 85 (+105 ) 630 0.01~0.033 236 66 5

General Safety Recommendations 1. Environment (1) Water, salt water, oil, and other electro conductive liquid adhered to the capacitors may cause capacitor failure. Capacitors wetted with liquid must never not be operated. (2) Capacitors must never be stored or operated in corrosive atmospheres, particularly not where chlorides, sulfides, acids, alkalis, salts, organic solvents or similar substances are present. (3) Capacitors must not be operated in ozone or where ultra violet radiation or radio active rays are irradiating. (4) In dust and dirt-prone environments, regular checks and maintenance (particularly of the terminals and insulators) are absolutely necessary to prevent creation of creepage distances between live parts and/or the protective conductor/ground. Dust and dirt shall be cleaned with paper or towel wetted with ethanol, not detergent. (5) Excessive vibration and/or shock may cause capacitor failure. 2. Mounting Location 2-1. Precaution (1) Mechanically or electrically damaged, leaky or otherwise damaged capacitors may not be used or continue to be used. (2) Do not place the capacitors directly above or nest to heat sources such as detuning or tuning reactors, bus bars, etc. (3) Enough creepage distances and air clearance have to be kept when connecting capacitors, bus bars and housings. 2-2. Mounting (1) Keep the torque described in catalog or data sheet. Toothed washer has to be used for fixing sutd bolt. (2) Stud bolt Series Stud bolt Torque MLC/MLC2 M12 7±1Nm Others M8 5±1Nm M12 15±1Nm (3) Three terminal type capacitors are equipped with Torx (T20). Use of improper screwdrivers may damage the screws and impair reliable fixation. (4) Improper connection may cause local heat generation, and rupture and ignite. Don't apply excessive stress to terminals and stud bolt. (5) The useful life of a capacitor may be reduced dramatically if exposed at excessive heat. (6) The permitted max temperature of the capacitor must not be exceeded even under the most critical ambient circumstances. (7) The inner temperature of capacitors must be verified not to exceed the maximum operating temperature specified in data sheet at the worst operating condition. Capacitors with thermo sensor (PT100) are available depending of requests. Under force cooled condition, over value specified in data sheet could be applied to capacitor. Please contact us when bus bars have high temperature and / or capacitors are placed with narrow space between them. They may cause increase in temperature of capacitors. (8) It should be noted that the internal heat balance of large capacitors is only reached after a couple of hours when verifying inner temperature rise of capacitors. (9) Capacitors with liquid or viscous filling shall be installed upright with terminals facing upwards. Capacitors with gas or solid resin filling can be mounted in any position without restriction. 3. Humidity Capacitors may not be stored or operated outside the specified humidity ranges. 70 70 70 Ambient temperature( ) 60 50 40 30 20 10 33 35 Ambient temperature( ) 60 50 40 30 20 10 21 23 25 Ambient temperature( ) 60 50 40 30 20 10 25 27 24 0 0 10 20 30 40 50 60 70 80 90 100 Humidity(%RH) 95 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Humidity(%RH) 75 85 95 Humidity(%RH) 65 75 85 E59/E62/E62-3HF series max. relative humidity : 95% annual means : 100% occasional condensation : permitted MLC/MLC2/E51/E53H/E55 series max. relative humidity : 75% annual means : 95% 30 days/year condensation : not permitted E53 series max. relative humidity : 75% annual means : 95% 30 days/year condensation : not permitted 4. Use condition 4-1. Ambient temperature / Current (1) Capacitors must be operated according to the specification in catalog and/or data sheets. (2) Overvoltage or thermal overload may cause rupture, ignition, and internal faults. When the highest temperature in capacitor is higher than 70, voltage derating has to be applied. For MLC and MLC2 series, permissible ripple can be calculated from ambient temperature, operating voltage and information in data sheet or catalog. Even if operating is lower than permissible value, the over permissible terminal may cause excessive terminal heat generation. (3) Ambient temperature is measured at point a point approximately 0.1m away from the capacitor housing and at two-third of the height from its base. 6

(4) It has to be noted that capacitors themselves generate heat. (5) Permissible decrease with the increase of ambient temperature. Therefore, It should be considered that capacitors must be selected by considering the operation at maximum ambient temperature. (6) Frequency may affect electric load. Capacitors have to be selectedby considering the effect of frequency. (7) It should be noted that resonance by inductance of external circuit may affect capacitor's performance. (8) It should be noted that parallel connection may cause unbalance because of the difference of circuit impedance. (9) Harmonics may cause excessive heat generation because of dielectric loss at low frequency, or skin effect at high frequency. When harmonics includes frequencies under 50Hz and/or over 10kHz components, the inner temperature of capacitors must be verified. We recommend to check the following characteristics before proceeding evaluation. Please consult us for individual support if any of the following conditions apply. a. Total harmonic distortion based on the data computed exceed 200% b. Ratio between total power losses and total dielectric power losses exceed 150% Capacitors with thermo sensor are not for endurance test, just for testing inner temperature rise. After the test, please scrap them. The internal temperature should be measured after the inner temperature reachs saturation (approx. five hours). 4-2. Cooling (1) Give at least 40mm for MLC/MLC2 series or 20mm for the others of clearance between the capacitors for natural or forced ventilation for effective heat dissipation of capacitors. 4-3. Voltage / Other use condition (1) Dielectric breakdown may cause severe internal fault such as short circuit, ignition and rupture. Capacitors must be operated inside the specified range specified in catalog and/or data sheets. For overvoltage within short period may not shorten service life time of capacitors. (2) Capacitors must be operated under rated voltage. Surge voltage specified in data sheet is just for capacitor evaluation, and does not guarantee the continuous operation of capacitors. (3) Inrush may cause internal faults. (4) Film capacitors have finite service life. (5) DC capacitors must not be operated under AC condition. When ripple voltage over 20% of rated voltage is applied to DC capacitors, it may cause capacitor failure. In this case, please contact us. 5. Vibration / Shock (1) Vibration and shock mainly affect fixing materials and terminals. It is important to measure the degree of vibration and shock at mounting location. (2) The capacitors comply with test standard (IEC60068-2-6) as follows. capacitor weight test duration frequency range max. acceleration max. displacement amplitude < 0.5 kg 30 cycles 10 ~ 500 Hz 50 m/s 2 0.35 mm 0.5 ~ 3.0 kg 30 cycles 10 ~ 500 Hz 50 m/s 2 0.075 mm > 3.0 kg information available on request 6. Capacitors with over pressure disconnector In the event of an increasing number of self-healing breakdowns, the pressure inside the capacitor may rise. To prevent it from bursting, the capacitors of series E62, E63 and E65 are fitted with an obligatory break-action mechanism. With rising pressure the case begins to expand and pushing the lid upwards. As a result, the prepared connecting wire is separated at the attenuated spot, and the path is interrupted irreversibly. Sufficient clearance (min35mm) for expansion of the capacitor case must be accommodated above the terminals. The capacitors shall only be connected with flexible cables or elastic copper bands. The capacitor lid must not be pressed. The terminals must not be damaged. Do not hit the border crimping and the connecting terminals with heavy or sharp objects or tools. 7. Safety of self-healing type film capacitors In the event of a voltage breakdown the metal layers around the breakdown channel are evaporated by the temperature of the electric arc that forms between the electrodes. An insulation area is formed which is reliably resistive and voltage proof for all operating requirements of the capacitor. The capacitor remains fully functional during and after the breakdown. Surge voltages and surge s within rated values induced by switching or faults of the system or any part of it are also permitted. 8. Mind hazards of explosion and fire (1) Capacitors consist mainly of polypropylene (up to 50%), i.e. their energy content is relatively high. They may rupture and ignite as a result of internal faults or external overload (e.g. temperature, overvoltage, harmonic distortion). (2) It must therefore be ensured, by appropriate measures, that they do not form any hazard to their environment in the event of failure or malfunction of the safety device. 9. Discharge In any event, the poles of the capacitors must be discharged with 1kOhm or larger resistance before being touched. Note that capacitors with nominal voltages above 750Vac or 2000Vdc in particular may regenerate new voltage at their terminals after having been short-circuited just for short periods. This condition will be avoided by storing them permanently short circuited. 7

10. Earthing Capacitors with a metal case must be earthed at the metal part or by means of a separate metal strap or clamp. 11. Environmental Compatibility (1) Our capacitors do not contain PCB, solvents or any other toxic or banned materials. (2) Our capacitors comply with RoHS directive. 12. Storage Capacitors must be stored indoors and specified condition. The storage period is maximum two years. Capacitors must not be stored or used outside the specified temperature ranges. When capacitors stored over two years are used, please confirm that the electric characteristics are within specifications, capacitor case are not covered with stains, and terminals are not covered with oxide film. 13. Fumigation treatment Fumigation treatment may be performed during transportation for insect proofing. Halide such as methyl bromide may cause corrosion inside capacitors, and lead to failure. Insecticide also may cause capacitor failure. 14. Disposal (1) We recommend disposing of the capacitors through professional recycling centers for electric/electronic waste. (2) After incineration of capacitors, matal parts such as terminal, aluminum case, lid and internal wirings will be remained. (3) Please consider that disposed capacitors should not put on the market. 15. Others (1) In case of fire, dried powder, carbon dioxide or foam fire extinguishing agent has to be used. (2) Please comply with transportation and exporting regulation in each nation. (3) As long as capacitors are operated properly, they don't have risk on a human body. (4) Capacitors usually have design life of approx. 15 to 20 years under proper operating condition. In order to maintain the reliability of equipment, it is recommend to replace the capacitors after ten years operation. 16. Important notice before use Hitachi AIC does not accept responsibility for whatever damage may arise out of a non-observance, or caused by capacitors without agreement on detail of use condition, evaluation condition etc. 8

Glossary Rated capacitance C N Capacitance value rated at 20 / 50 Hz. Rated Voltage U N The maximum or peak voltage of either polarity of a reversing or nonreversing type wave form for which the capacitor has been designed and rated (unlike other standards for AC capacitors, the rated voltage is not the rms value). Non repetitive peak (surge) voltage U S Voltages beyond the rated voltage induced by switching or faults of the system or any part of it. Maximum count 1000 times with a duration of not more than 50 ms each. rms voltage U rms Root mean square of the max. permissible value of sinusoidal AC voltage in continuous operation. Ripple voltage U r The peak-to-peak alternating component of the unidirectional voltage. Voltage test between terminals U TT Routine test of all capacitors conducted at room temperature, prior to delivery. A further test with 80% of the test voltage stated in the data sheet may be carried out once at the user s location. Self-inductance L e Represents the sum of all inductive elements which are for mechanical and construction reasons contained in any capacitor. Resonant frequency f res The capacitance and self-inductance of any capacitor form a series resonant circuit. Above the resonant frequency, the inductive part of this LC-circuit prevails. The capacitor would then behave as an inductor. Dielectric dissipation factor tanδ 0 Constant dissipation factor of the dielectric material for all capacitors in their rated frequency. Thermal resistance R th The thermal resistance indicates by how many degrees the capacitor temperature at the hotspot rises in relation to the dissipation losses. Maximum power dissipation P max Maximum permitted power dissipation for the capacitor s operation at a certain ambient temperature. Ambient temperature θ U Temperature of the surrounding air, measured 10 cm away and at 2/3 of the case height of the capacitor. Voltage test between terminals and case U TC Routine test of all capacitors between short-circuited terminals and case, conducted at room temperature. May be repeated at the user s location. Maximum I max Maximum rms value of permissible in continuous operation. The values given in the data sheets are related to either the specified maximum power dissipation or the limits of the connection terminals. Peak Î Maximum permitted repetitive amplitude during continuous operation. Non-repetitive peak (surge) I S Maximum that may occur non-repetitively and briefly in the event of a fault. Maximum count 1000 times with a duration of not more than 50 ms each. Lower category temperature θ min Lowest permissible ambient temperature at which a capacitor may be used. Upper category temperature θ max Highest permissible capacitor temperature during operation, i.e. temperature at the hottest point of the case. Hotspot temperature θ HOTSPOT Temperature at the hottest spot inside the capacitor. Rated energy contents E N Energy stored in the capacitor when charged at rated voltage. Clearance in air L The shortest distance between conducting parts of the terminals or between terminals and case. Creepage distance K The shortest distance along an insulated surface between conducting parts of the terminals or between terminals and case. Equivalent series resistance R S Equivalent resistance representing the sum of all Ohmic resistances occurring inside the capacitor. Essential for calculation of the dependent losses. 9

MLC Series (Cylindrically-Shaped Metallized Polypropylene Fim Capacitos) Cylindrically-shaped capacitor with big capacitance for wind & solar power inverters, other inverters, chopper control and charge-dischrage. High reliability of withstanding voltage due to using of our original segmented metallized film. Specifications Items Characteristics -40~+85 at 0.7 U R Operating Temperature range * -40~+80 at 0.8 U R -40~+75 at 0.9 U R -40~+70 at 1.0 U R Storage Temperature range -40~+85 Rated Voltage U R 900~1,500Vdc Voltage test between terminals U TT 1.5 U R/10s Voltage test terminals to case U TC 3,200Vac/10s Terminals (permitted Torque) M6 10 (4 ±0.5Nm) Stud Bolt (permitted Torque) M12 16/18 (7 ±1Nm) Life Time Test / Standard IEC 61071 : 2007 Dielectric Polypropylene Electrode Segmented Metal with Fuse Function Cap PBT UL94V-0 listed impregnants Epoxy/Urethane Resin UL94V-0 listed Case material Aluminium Humidity ClassF : 75%annual average, 95% 30days / year Dimensions (mm) φd φ85 φ88.5 φ100 φ116 φ140 P 32 32 32 50 50 d T φ12 φ12 φ12 φ14 φ19 L 2 5 5 5 5 5 L C 15 15 15 20 20 L S 16 16 16 18 18 Clearance distance (mm) 20 20 20 36 31 Creepage distance (mm) 28 28 28 36 31 Terminal allowance 60Arms 60Arms 60Arms 80Arms 100Arms I MAX Multiplier(1kHz ~ 10kHz) Ta Ambient Temperature 0.7 U R 0.8 U R 0.9 U R 1.0 U R 50 1.3 1.2 1.1 1.0 60 1.1 1.0 0.9 0.7 70 0.9 0.7 0.5 0.0 75 0.7 0.5 0.0 80 0.5 0.0 85 0.0 Outline of drawings and dimensions M6 10 L 2 ±1 L C L 1 ±2 L S ±1 if requested d T M12 D±1 p±0.5 Marking stud bolt Projection Rib (Not for 116mm and 140 diameter items) Product symbol Example : MLC, 1100V, 580μF, ±10%, D =φ116, L = 125, with stud bolt MLC1100V587KB116125 MLC 1100V 587 K B 116 125 (... ) Type of series Capacitance code Fixing symbol code The first two digits are B:Stud Bolt significant. N:Plain Bottom Case length L 1 The last digit in dicates the number of following zeros in PF(10-12 ) Tolerance code J:±5% Rated voltage K:±10% Case dimenter φd Costomers Specification 10

Standard Value and case size Rated d.c voltage U R : 900Vdc Nominal Capacitance C N μf Max.ripple voltage U r : 200V Non repetitive surge voltage U S : 1,350V Voltage test between terminals U TT : 1,350Vdc/10s Voltage test terminals to case. U TC : 3,200Vac/10s Dimensions Length of Diameter the case Remarks D L 1 mm mm Maximum ripple (Arms) I max * Arms/at50 1k ~ 10kHz Maximum peak I ^ ka Maximum Surge I s ka Charge energy Please inquire us in case low frequency (commercial frequency) or frequency above 10kHz is included in ripple. Maximum permissible ripple is calculated by the value in this table with frequency and temperature correction factors. Also the maximum must be controlled below the permissible terminal. Please refer useful life graph based on ambient temperature and voltage. HOTSPOT = T a +I 2 ESR R th W J Equivalent Series Resistance ESR m Equivalent Series Inductance ESL nh Thermal resistance R th K/W Product Symbol 180 85 70 Standard size 28 4 12 73 2.9 60 8.4 MLC900V187KB8570 200 85 75 28 4 12 81 3.1 65 7.9 MLC900V207KB8575 210 88.5 70 Standard size 31 5 15 85 2.6 60 7.8 MLC900V217KB88570 230 88.5 75 30 5 15 93 2.8 65 7.7 MLC900V237KB88575 85 80 28 4 12 93 3.3 65 7.4 MLC900V237KB8580 250 88.5 80 30 4 12 101 3.1 65 7.0 MLC900V257KB88580 260 85 87 28 4 12 105 3.7 75 6.8 MLC900V267KB8587 270 100 70 Standard size 37 6 18 109 2.2 60 6.5 MLC900V277KB10070 280 88.5 87 28 4 12 113 3.4 75 6.8 MLC900V287KB88587 290 85 95 Standard size 27 4 12 117 4.1 80 6.4 MLC900V297KB8595 300 100 75 37 6 18 122 2.3 65 6.1 MLC900V307KB10075 320 88.5 95 Standard size 29 4 12 130 3.8 80 6.1 MLC900V327KB88595 330 100 80 36 6 18 134 2.5 65 5.9 MLC900V337KB10080 85 106 27 4 12 134 4.8 90 5.6 MLC900V337KB85106 360 88.5 106 28 4 12 146 4.4 90 5.7 MLC900V367KB885106 370 100 87 36 6 18 150 2.8 75 5.4 MLC900V377KB10087 85 125 Standard size 52 8 24 150 1.5 40 4.8 MLC900V377KB85125 380 116 70 Standard size 43 8 24 154 1.7 60 6.0 MLC900V387KB11670 390 85 120 26 4 12 158 5.5 100 5.2 MLC900V397KB85120 410 116 75 43 8 24 166 1.9 65 5.6 MLC900V417KB11675 85 135 52 8 24 166 1.6 40 4.5 MLC900V417KB85135 420 88.5 125 Standard size 56 9 27 170 1.4 40 4.5 MLC900V427KB885125 100 95 Standard size 34 6 18 170 3.1 80 5.4 MLC900V427KB10095 430 88.5 120 28 5 15 174 5.1 100 4.9 MLC900V437KB885120 88.5 135 56 9 27 186 1.5 40 4.2 MLC900V467KB885135 460 116 80 43 8 24 186 2.0 65 5.2 MLC900V467KB11680 85 145 52 8 24 186 1.7 45 4.1 MLC900V467KB85145 480 100 106 34 6 18 194 3.5 90 4.7 MLC900V487KB100106 510 88.5 145 55 9 27 207 1.6 45 4.0 MLC900V517KB885145 520 116 87 42 8 24 211 2.2 75 5.0 MLC900V527KB11687 85 159 52 8 24 211 1.9 50 3.8 MLC900V527KB85159 540 100 125 Standard size 60 12 36 219 1.1 40 3.9 MLC900V547KB100125 560 100 120 33 6 18 227 4.1 100 4.3 MLC900V567KB100120 570 88.5 159 55 9 27 231 1.8 50 3.6 MLC900V577KB885159 140 70 Standard size 46 12 36 231 1.4 60 6.6 MLC900V577KB14070 590 116 95 Standard size 42 8 24 239 2.4 80 4.5 MLC900V597KB11695 85 175 Standard size 52 8 24 239 2.1 55 3.4 MLC900V597KB85175 600 100 135 60 12 36 243 1.2 40 3.6 MLC900V607KB100135 630 140 75 46 12 36 255 1.4 65 6.6 MLC900V637KB14075 650 88.5 175 Standard size 55 9 27 263 2.0 55 3.2 MLC900V657KB885175 660 116 106 41 8 24 267 2.8 90 4.2 MLC900V667KB116106 85 197 51 8 24 267 2.5 60 3.0 MLC900V667KB85197 670 100 145 60 12 36 271 1.3 45 3.5 MLC900V677KB100145 700 140 80 46 12 36 284 1.6 65 5.8 MLC900V707KB14080 730 88.5 197 54 9 27 296 2.3 60 2.9 MLC900V737KB885197 750 100 159 60 12 36 304 1.5 50 3.2 MLC900V757KB100159 760 116 125 Standard size 77 16 48 308 0.9 40 3.5 MLC900V767KB116125 116 120 41 8 24 316 3.2 100 3.6 MLC900V787KB116120 780 140 87 46 12 36 316 1.7 75 5.4 MLC900V787KB14087 85 225 50 8 24 316 2.9 70 2.7 MLC900V787KB85225 830 116 135 77 16 48 336 1.0 40 3.3 MLC900V837KB116135 850 100 175 Standard size 60 12 36 344 1.6 55 2.8 MLC900V857KB100175 870 88.5 225 54 9 27 352 2.6 70 2.6 MLC900V877KB885225 890 140 95 Standard size 45 12 36 360 1.9 80 5.1 MLC900V897KB14095 930 116 145 77 16 48 377 1.1 45 3.1 MLC900V937KB116145 960 100 197 60 12 36 389 1.9 60 2.5 MLC900V967KB100197 1,000 116 159 76 16 48 405 1.2 50 2.8 MLC900V108KB116159 140 106 44 12 36 405 2.1 90 4.8 MLC900V108KB140106 100 225 60 11 33 446 2.2 70 2.2 MLC900V118KB100225 1,100 116 175 Standard size 75 15 45 446 1.4 55 2.5 MLC900V118KB116175 140 120 43 11 33 446 2.5 100 4.2 MLC900V118KB140120 140 125 Standard size 80 24 72 446 0.8 40 3.8 MLC900V118KB140125 1,200 140 135 80 23 69 486 0.8 40 3.8 MLC900V128KB140135 1,300 116 197 75 16 48 527 1.5 60 2.3 MLC900V138KB116197 1,400 140 145 81 24 72 567 0.8 45 3.7 MLC900V148KB140145 1,500 116 225 74 16 48 608 1.8 70 2.0 MLC900V158KB116225 140 159 80 23 69 608 0.9 50 3.4 MLC900V158KB140159 1,700 140 175 Standard size 79 23 69 689 1.0 55 3.2 MLC900V178KB140175 2,000 140 197 80 24 72 810 1.2 60 2.6 MLC900V208KB140197 2,300 140 225 79 24 72 932 1.3 70 2.3 MLC900V238KB140225 11

Standard Value and case size Rated d.c voltage U R : 1,100Vdc Nominal Capacitance C N μf Max.ripple voltage U r : 250V Non repetitive surge voltage U S : 1,650V Voltage test between terminals U TT : 1,650Vdc/10s Voltage test terminals to case. U TC : 3,200Vac/10s Dimensions Length of Diameter the case Remarks D L 1 mm mm Maximum ripple (Arms) I max * Arms/at50 1k ~ 10kHz Maximum peak I ^ ka Maximum Surge I s ka Charge energy Please inquire us in case low frequency (commercial frequency) or frequency above 10kHz is included in ripple. Maximum permissible ripple is calculated by the value in this table with frequency and temperature correction factors. Also the maximum must be controlled below the permissible terminal. Please refer useful life graph based on ambient temperature and voltage. HOTSPOT = T a +I 2 ESR R th W J Equivalent Series Resistance ESR m Equivalent Series Inductance ESL nh Thermal resistance R th K/W Product Symbol 140 85 70 Standard size 26 3 9 85 3.3 60 8.6 MLC1100V147KB8570 160 85 75 27 4 12 97 3.5 65 7.6 MLC1100V167KB8575 170 88.5 70 Standard size 29 4 12 103 2.8 60 8.3 MLC1100V177KB88570 180 85 80 27 4 12 109 3.7 65 7.1 MLC1100V187KB8580 88.5 75 29 4 12 109 3.1 65 7.5 MLC1100V187KB88575 200 85 87 26 4 12 121 4.2 75 6.9 MLC1100V207KB8587 88.5 80 28 4 12 121 3.4 65 7.3 MLC1100V207KB88580 210 100 70 Standard size 34 5 15 127 2.4 60 6.9 MLC1100V217KB10070 85 95 Standard size 26 4 12 139 4.6 80 6.2 MLC1100V237KB8595 230 88.5 87 28 4 12 139 3.7 75 6.7 MLC1100V237KB88587 100 75 34 5 15 139 2.6 65 6.4 MLC1100V237KB10075 85 106 25 4 12 157 5.3 90 5.8 MLC1100V267KB85106 260 88.5 95 Standard size 28 4 12 157 4.1 80 6.1 MLC1100V267KB88595 100 80 33 5 15 157 2.8 65 6.3 MLC1100V267KB10080 85 125 Standard size 50 7 21 175 1.7 40 4.7 MLC1100V297KB85125 290 88.5 106 27 4 12 175 4.8 90 5.6 MLC1100V297KB885106 100 87 33 5 15 175 3.1 75 5.8 MLC1100V297KB10087 116 70 Standard size 41 7 21 175 1.9 60 6.0 MLC1100V297KB11670 310 85 120 25 4 12 188 6.1 100 5.1 MLC1100V317KB85120 320 85 135 50 7 21 194 1.8 40 4.3 MLC1100V327KB85135 116 75 41 7 21 194 2.1 65 5.6 MLC1100V327KB11675 330 88.5 125 Standard size 53 8 24 200 1.5 40 4.6 MLC1100V337KB885125 100 95 Standard size 33 5 15 200 3.4 80 5.2 MLC1100V337KB10095 350 88.5 120 27 4 12 212 5.5 100 4.9 MLC1100V357KB885120 360 85 145 49 7 21 218 1.9 45 4.2 MLC1100V367KB85145 116 80 41 7 21 218 2.2 65 5.2 MLC1100V367KB11680 370 88.5 135 54 8 24 224 1.6 40 4.2 MLC1100V377KB885135 380 100 106 32 5 15 230 3.9 90 4.8 MLC1100V387KB100106 400 85 159 49 7 21 242 2.2 50 3.7 MLC1100V407KB85159 116 87 40 7 21 242 2.4 75 5.0 MLC1100V407KB11687 410 88.5 145 53 8 24 248 1.7 45 4.1 MLC1100V417KB885145 440 100 125 Standard size 60 10 30 266 1.2 40 3.9 MLC1100V447KB100125 450 100 120 32 5 15 272 4.5 100 4.2 MLC1100V457KB100120 85 175 Standard size 49 7 21 278 2.4 55 3.4 MLC1100V467KB85175 460 88.5 159 53 8 24 278 1.9 50 3.7 MLC1100V467KB885159 116 95 Standard size 40 7 21 278 2.7 80 4.5 MLC1100V467KB11695 140 70 Standard size 45 11 33 278 1.4 60 6.9 MLC1100V467KB14070 470 100 135 60 10 30 284 1.4 40 3.6 MLC1100V477KB100135 500 140 75 45 11 33 303 1.6 65 6.0 MLC1100V507KB14075 520 100 145 60 10 30 315 1.5 45 3.4 MLC1100V527KB100145 85 197 48 7 21 321 2.7 60 3.1 MLC1100V537KB85197 530 88.5 175 Standard size 53 8 24 321 2.1 55 3.3 MLC1100V537KB885175 116 106 40 7 21 321 3.0 90 4.0 MLC1100V537KB116106 560 140 80 44 11 33 339 1.7 65 5.9 MLC1100V567KB14080 580 100 159 60 10 30 351 1.6 50 3.1 MLC1100V587KB100159 116 125 Standard size 73 14 42 351 1.0 40 3.6 MLC1100V587KB116125 590 88.5 197 52 8 24 357 2.5 60 2.9 MLC1100V597KB885197 620 85 225 48 7 21 375 3.2 70 2.7 MLC1100V627KB85225 116 120 39 7 21 375 3.5 100 3.6 MLC1100V627KB116120 630 140 87 44 11 33 381 1.8 75 5.6 MLC1100V637KB14087 650 116 135 74 14 42 393 1.1 40 3.3 MLC1100V657KB116135 690 100 175 Standard size 60 10 30 417 1.7 55 2.9 MLC1100V697KB100175 700 88.5 225 51 8 24 424 2.9 70 2.6 MLC1100V707KB885225 720 116 145 74 14 42 436 1.2 45 3.0 MLC1100V727KB116145 140 95 Standard size 44 11 33 436 2.0 80 5.0 MLC1100V727KB14095 760 100 197 60 10 30 460 2.0 60 2.5 MLC1100V767KB100197 810 116 159 73 14 42 490 1.3 50 2.8 MLC1100V817KB116159 140 106 43 11 33 490 2.3 90 4.6 MLC1100V817KB140106 900 100 225 60 10 30 545 2.4 70 2.2 MLC1100V907KB100225 920 116 175 Standard size 73 14 42 557 1.4 55 2.6 MLC1100V927KB116175 140 125 Standard size 79 22 66 557 0.8 40 3.9 MLC1100V927KB140125 950 140 120 43 11 33 575 2.6 100 4.1 MLC1100V957KB140120 1,000 140 135 79 22 66 605 0.8 40 3.9 MLC1100V108KB140135 116 197 71 14 42 605 1.7 60 2.3 MLC1100V108KB116197 1,100 140 145 78 22 66 666 0.9 45 3.6 MLC1100V118KB140145 1,200 140 159 77 21 63 726 1.0 50 3.3 MLC1100V128KB140159 116 225 71 14 42 726 1.9 70 2.0 MLC1100V128KB116225 1,400 140 175 Standard size 78 21 63 847 1.1 55 2.9 MLC1100V148KB140175 1,600 140 197 77 22 66 968 1.2 60 2.8 MLC1100V168KB140197 1,900 140 225 77 22 66 1,150 1.4 70 2.4 MLC1100V198KB140225 12

Standard Value and case size Rated d.c voltage U R : 1,300Vdc Nominal Capacitance C N μf Max.ripple voltage U r : 300V Non repetitive surge voltage U S : 1,950V Voltage test between terminals U TT : 1,950Vdc/10s Voltage test terminals to case. U TC : 3,200Vac/10s Dimensions Length of Diameter the case Remarks D L 1 mm mm Maximum ripple (Arms) I max * Arms/at50 1k ~ 10kHz Maximum peak I ^ ka Maximum Surge I s ka Charge energy Please inquire us in case low frequency (commercial frequency) or frequency above 10kHz is included in ripple. Maximum permissible ripple is calculated by the value in this table with frequency and temperature correction factors. Also the maximum must be controlled below the permissible terminal. Please refer useful life graph based on ambient temperature and voltage. HOTSPOT = T a +I 2 ESR R th W J Equivalent Series Resistance ESR m Equivalent Series Inductance ESL nh Thermal resistance R th K/W Product Symbol 100 85 70 Standard size 25 3 9 85 3.8 60 8.1 MLC1300V107KB8570 110 85 75 25 3 9 93 4.1 65 7.6 MLC1300V117KB8575 88.5 70 Standard size 26 3 9 93 3.5 60 8.2 MLC1300V117KB88570 120 88.5 75 26 3 9 101 3.8 65 7.6 MLC1300V127KB88575 130 85 80 25 3 9 110 4.2 65 7.3 MLC1300V137KB8580 140 85 87 24 3 9 118 4.8 75 7.0 MLC1300V147KB8587 88.5 80 26 3 9 118 4.0 65 7.2 MLC1300V147KB88580 150 100 70 Standard size 32 4 12 127 2.7 60 6.9 MLC1300V157KB10070 160 85 95 Standard size 24 3 9 135 5.4 80 6.3 MLC1300V167KB8595 88.5 87 26 3 9 135 4.3 75 6.7 MLC1300V167KB88587 170 100 75 32 4 12 144 2.9 65 6.5 MLC1300V177KB10075 180 88.5 95 Standard size 26 3 9 152 4.8 80 6.0 MLC1300V187KB88595 100 80 31 4 12 152 3.3 65 6.2 MLC1300V187KB10080 190 85 106 24 3 9 161 6.0 90 5.6 MLC1300V197KB85106 200 88.5 106 25 3 9 169 5.7 90 5.5 MLC1300V207KB885106 85 125 Standard size 47 6 18 177 1.9 40 4.7 MLC1300V217KB85125 210 100 87 31 4 12 177 3.5 75 5.8 MLC1300V217KB10087 116 70 Standard size 39 6 18 177 2.1 60 5.9 MLC1300V217KB11670 220 85 120 23 3 9 186 7.0 100 5.2 MLC1300V227KB85120 85 135 47 6 18 194 2.0 40 4.3 MLC1300V237KB85135 230 88.5 125 Standard size 50 7 21 194 1.7 40 4.6 MLC1300V237KB885125 116 75 39 6 18 194 2.3 65 5.5 MLC1300V237KB11675 240 88.5 120 25 3 9 203 6.5 100 4.8 MLC1300V247KB885120 100 95 Standard size 31 4 12 203 3.8 80 5.2 MLC1300V247KB10095 250 88.5 135 49 7 21 211 1.9 40 4.3 MLC1300V257KB885135 260 85 145 47 6 18 220 2.2 45 4.0 MLC1300V267KB85145 116 80 39 6 18 220 2.5 65 5.2 MLC1300V267KB11680 270 100 106 30 4 12 228 4.4 90 4.8 MLC1300V277KB100106 280 88.5 145 49 7 21 237 2.0 45 4.1 MLC1300V287KB885145 290 85 159 46 6 18 245 2.4 50 3.8 MLC1300V297KB85159 116 87 38 6 18 245 2.7 75 4.9 MLC1300V297KB11687 300 100 125 Standard size 59 9 27 254 1.4 40 3.9 MLC1300V307KB100125 310 140 70 Standard size 42 9 27 262 1.7 60 6.5 MLC1300V317KB14070 320 88.5 159 49 7 21 270 2.2 50 3.7 MLC1300V327KB885159 100 120 30 4 12 270 5.1 100 4.2 MLC1300V327KB100120 85 175 Standard size 46 6 18 279 2.7 55 3.4 MLC1300V337KB85175 330 100 135 59 9 27 279 1.5 40 3.6 MLC1300V337KB100135 116 95 Standard size 38 6 18 279 3.0 80 4.5 MLC1300V337KB11695 350 140 75 43 9 27 296 1.7 65 6.2 MLC1300V357KB14075 360 88.5 175 Standard size 49 7 21 304 2.5 55 3.3 MLC1300V367KB885175 370 100 145 59 9 27 313 1.7 45 3.3 MLC1300V377KB100145 85 197 46 6 18 321 3.1 60 3.0 MLC1300V387KB85197 380 116 106 38 6 18 321 3.4 90 3.9 MLC1300V387KB116106 140 80 42 9 27 321 1.9 65 5.8 MLC1300V387KB14080 410 88.5 197 48 7 21 346 2.9 60 2.9 MLC1300V417KB885197 420 100 159 59 9 27 355 1.8 50 3.1 MLC1300V427KB100159 116 125 Standard size 70 12 36 355 1.1 40 3.5 MLC1300V427KB116125 430 140 87 42 9 27 363 2.1 75 5.3 MLC1300V437KB14087 450 85 225 45 6 18 380 3.5 70 2.7 MLC1300V457KB85225 116 120 37 6 18 380 3.9 100 3.6 MLC1300V457KB116120 460 116 135 70 12 36 389 1.2 40 3.3 MLC1300V467KB116135 470 100 175 Standard size 57 9 27 397 2.0 55 2.9 MLC1300V477KB100175 480 88.5 225 47 7 21 406 3.3 70 2.7 MLC1300V487KB885225 490 140 95 Standard size 41 9 27 414 2.3 80 5.1 MLC1300V497KB14095 520 116 145 70 12 36 439 1.3 45 3.0 MLC1300V527KB116145 550 100 197 57 9 27 465 2.3 60 2.6 MLC1300V557KB100197 140 106 40 9 27 465 2.6 90 4.7 MLC1300V557KB140106 580 116 159 70 12 36 490 1.4 50 2.8 MLC1300V587KB116159 630 140 125 Standard size 75 18 54 532 0.9 40 3.9 MLC1300V637KB140125 650 100 225 57 9 27 549 2.6 70 2.3 MLC1300V657KB100225 140 120 40 9 27 549 3.0 100 4.1 MLC1300V657KB140120 660 116 175 Standard size 69 12 36 558 1.6 55 2.6 MLC1300V667KB116175 700 140 135 75 18 54 592 0.9 40 3.9 MLC1300V707KB140135 760 116 197 69 12 36 642 1.8 60 2.3 MLC1300V767KB116197 770 140 145 74 18 54 651 1.0 45 3.6 MLC1300V777KB140145 870 140 159 74 18 54 735 1.1 50 3.3 MLC1300V877KB140159 900 116 225 69 13 39 761 2.1 70 2.0 MLC1300V907KB116225 990 140 175 Standard size 74 18 54 837 1.2 55 3.0 MLC1300V997KB140175 1,100 140 197 73 18 54 930 1.4 60 2.6 MLC1300V118KB140197 1,300 140 225 72 18 54 1,099 1.6 70 2.4 MLC1300V138KB140225 13

Standard Value and case size Rated d.c voltage U R : 1,500Vdc Nominal Capacitance C N μf Max.ripple voltage U r : 350V Non repetitive surge voltage U S : 2,250V Voltage test between terminals U TT : 2,250Vdc/10s Voltage test terminals to case. U TC : 3,200Vac/10s Dimensions Length of Diameter the case Remarks D L 1 mm mm Maximum ripple (Arms) I max * Arms/at50 1k ~ 10kHz Maximum peak I ^ ka Maximum Surge I s ka Charge energy Please inquire us in case low frequency (commercial frequency) or frequency above 10kHz is included in ripple. Maximum permissible ripple is calculated by the value in this table with frequency and temperature correction factors. Also the maximum must be controlled below the permissible terminal. Please refer useful life graph based on ambient temperature and voltage. HOTSPOT = T a +I 2 ESR R th W J Equivalent Series Resistance ESR m Equivalent Series Inductance ESL nh Thermal resistance R th K/W Product Symbol 70 85 70 Standard size 23 2 6 79 4.6 60 8.0 MLC1500V706KB8570 80 85 75 23 2 6 90 4.8 65 7.7 MLC1500V806KB8575 88.5 70 Standard size 25 3 9 90 4.0 60 7.8 MLC1500V806KB88570 90 85 80 23 3 9 101 5.1 65 7.1 MLC1500V906KB8580 88.5 75 25 3 9 101 4.3 65 7.2 MLC1500V906KB88575 100 85 87 22 2 6 113 5.7 75 7.0 MLC1500V107KB8587 88.5 80 24 3 9 113 4.7 65 7.2 MLC1500V107KB88580 85 95 Standard size 22 2 6 124 6.5 80 6.1 MLC1500V117KB8595 110 88.5 87 24 3 9 124 5.2 75 6.5 MLC1500V117KB88587 100 70 Standard size 30 4 12 124 3.1 60 6.9 MLC1500V117KB10070 120 100 75 30 4 12 135 3.4 65 6.3 MLC1500V127KB10075 85 106 22 3 9 146 7.3 90 5.5 MLC1500V137KB85106 130 88.5 95 Standard size 24 3 9 146 5.6 80 6.0 MLC1500V137KB88595 100 80 29 4 12 146 3.8 65 6.1 MLC1500V137KB10080 85 125 Standard size 43 5 15 169 2.2 40 4.7 MLC1500V157KB85125 150 88.5 106 24 3 9 169 6.4 90 5.3 MLC1500V157KB885106 100 87 29 4 12 169 4.0 75 5.7 MLC1500V157KB10087 116 70 Standard size 37 5 15 169 2.5 60 5.7 MLC1500V157KB11670 85 120 22 3 9 180 8.1 100 4.9 MLC1500V167KB85120 160 85 135 43 5 15 180 2.4 40 4.3 MLC1500V167KB85135 116 75 36 5 15 180 2.7 65 5.5 MLC1500V167KB11675 88.5 120 23 3 9 191 7.7 100 4.8 MLC1500V177KB885120 170 88.5 125 Standard size 47 6 18 191 2.0 40 4.4 MLC1500V177KB885125 100 95 Standard size 29 4 12 191 4.5 80 5.1 MLC1500V177KB10095 85 145 43 5 15 203 2.6 45 4.0 MLC1500V187KB85145 180 88.5 135 46 6 18 203 2.2 40 4.2 MLC1500V187KB885135 116 80 36 5 15 203 2.9 65 5.1 MLC1500V187KB11680 190 100 106 28 4 12 214 5.2 90 4.7 MLC1500V197KB100106 85 159 42 5 15 225 2.9 50 3.8 MLC1500V207KB85159 200 88.5 145 45 6 18 225 2.4 45 4.0 MLC1500V207KB885145 116 87 34 5 15 225 3.2 75 5.2 MLC1500V207KB11687 210 100 125 Standard size 54 7 21 236 1.7 40 3.9 MLC1500V217KB100125 85 175 Standard size 42 5 15 259 3.2 55 3.4 MLC1500V237KB85175 88.5 159 46 6 18 259 2.6 50 3.6 MLC1500V237KB885159 230 100 120 28 4 12 259 5.9 100 4.2 MLC1500V237KB100120 116 95 Standard size 34 5 15 259 3.5 80 4.7 MLC1500V237KB11695 140 70 Standard size 40 8 24 259 1.8 60 6.8 MLC1500V237KB14070 240 100 135 54 7 21 270 1.8 40 3.8 MLC1500V247KB100135 250 140 75 40 8 24 281 2.0 65 6.2 MLC1500V257KB14075 260 88.5 175 Standard size 45 6 18 293 2.9 55 3.3 MLC1500V267KB885175 100 145 53 7 21 293 2.0 45 3.5 MLC1500V267KB100145 270 85 197 42 5 15 304 3.6 60 3.0 MLC1500V277KB85197 116 106 34 5 15 304 3.9 90 4.3 MLC1500V277KB116106 280 140 80 40 8 24 315 2.1 65 5.8 MLC1500V287KB14080 88.5 197 45 6 18 338 3.3 60 2.9 MLC1500V307KB885197 300 100 159 54 7 21 338 2.1 50 3.2 MLC1500V307KB100159 116 125 Standard size 66 10 30 338 1.3 40 3.4 MLC1500V307KB116125 85 225 42 5 15 360 4.2 70 2.6 MLC1500V327KB85225 320 116 120 34 5 15 360 4.5 100 3.7 MLC1500V327KB116120 140 87 40 8 24 360 2.3 75 5.3 MLC1500V327KB14087 330 116 135 66 10 30 371 1.4 40 3.2 MLC1500V337KB116135 340 100 175 Standard size 53 7 21 383 2.3 55 3.0 MLC1500V347KB100175 350 88.5 225 44 6 18 394 3.8 70 2.7 MLC1500V357KB885225 360 140 95 Standard size 39 8 24 405 2.5 80 5.1 MLC1500V367KB14095 370 116 145 65 10 30 416 1.5 45 3.1 MLC1500V377KB116145 390 100 197 53 8 24 439 2.7 60 2.6 MLC1500V397KB100197 400 140 106 38 8 24 450 2.9 90 4.7 MLC1500V407KB140106 410 116 159 65 10 30 461 1.7 50 2.8 MLC1500V417KB116159 460 100 225 52 8 24 518 3.1 70 2.3 MLC1500V467KB100225 140 125 Standard size 71 16 48 518 1.0 40 3.9 MLC1500V467KB140125 470 116 175 Standard size 65 10 30 529 1.8 55 2.5 MLC1500V477KB116175 480 140 120 38 8 24 540 3.3 100 4.1 MLC1500V487KB140120 510 140 135 71 16 48 574 1.0 40 3.9 MLC1500V517KB140135 540 116 197 64 10 30 608 2.1 60 2.3 MLC1500V547KB116197 570 140 145 71 16 48 641 1.1 45 2.5 MLC1500V577KB140145 640 116 225 64 10 30 720 2.4 70 2.0 MLC1500V647KB116225 140 159 71 16 48 720 1.2 50 3.2 MLC1500V647KB140159 720 140 175 Standard size 70 16 48 810 1.3 55 3.1 MLC1500V727KB140175 810 140 197 69 16 48 911 1.5 60 2.8 MLC1500V817KB140197 960 140 225 69 16 48 1,080 1.8 70 2.3 MLC1500V967KB140225 14

NEW! MLC2 Series (Cylindrically-Shaped Metallized Polypropylene Fim Capacitos) Approx. 15% smaller than MLC series in volume. Cylindrically-shaped capacitor with big capacitance for wind & solar power inverters, other inverters, chopper control and charge-dischrage. High reliability of withstanding voltage due to using of our original segmented metallized film. Specifications Items Characteristics -40~+85 at 0.7 U R Operating Temperature range * -40~+80 at 0.8 U R -40~+75 at 0.9 U R -40~+70 at 1.0 U R Storage Temperature range -40~+85 Rated Voltage U R 800~900Vdc Voltage test between terminals U TT 1.5 U R/10s Voltage test terminals to case U TC 3,200Vac/10s Terminals (permitted Torque) M6 10 (4 ±0.5Nm) Stud Bolt (permitted Torque) M12 16/18 (7 ±1Nm) Life Time Test / Standard IEC 61071 : 2007 Dielectric Polypropylene Electrode Segmented Metal with Fuse Function Cap PBT UL94V-0 listed impregnants Epoxy/Urethane Resin UL94V-0 listed Case material Aluminium Humidity ClassF : 75%annual average, 95% 30days / year Dimensions (mm) φd φ85 φ88.5 φ100 φ116 φ140 P 32 32 32 50 50 d T φ12 φ12 φ12 φ14 φ19 L 2 5 5 5 5 5 L C 15 15 15 20 20 L S 16 16 16 18 18 Clearance distance (mm) 20 20 20 36 31 Creepage distance (mm) 28 28 28 36 31 Terminal allowance 60Arms 60Arms 60Arms 80Arms 100Arms I MAX Multiplier(1kHz ~ 10kHz) Ta Ambient Temperature 0.7 U R 0.8 U R 0.9 U R 1.0 U R 50 1.3 1.2 1.1 1.0 60 1.1 1.0 0.9 0.7 70 0.9 0.7 0.5 0.0 75 0.7 0.5 0.0 80 0.5 0.0 85 0.0 Outline of drawings and dimensions M6 10 L 2 ±1 L C L 1 ±2 L S ±1 if requested d T M12 D±1 p±0.5 Marking stud bolt Projection Rib (Not for 116mm and 140 diameter items) Product symbol Example : MLC, 800V, 1200μF, ±10%, D =φ116, L = 125, with stud bolt MLC800V128KB116125 MLC2 800V 128 K B 116 125 (...) Type of series Capacitance code Fixing symbol code The first two digits are B:Stud Bolt significant. N:Plain Bottom Case length L 1 The last digit in dicates the number of following zeros in PF Tolerance code (128:12 10 8 pf) J:±5% Rated voltage K:±10% Case dimenter φd Costomers Specification 15

Standard Value and case size Rated d.c voltage U R : 800Vdc Nominal Capacitance C N μf Max.ripple voltage U r : 200V Non repetitive surge voltage U S : 1,200V Voltage test between terminals U TT : 1,200Vdc/10s Voltage test terminals to case. U TC : 3,200Vac/10s Dimensions Length of Diameter the case D L 1 mm mm Remarks Maximum ripple (Arms) I max * Arms/at50 1k ~ 10kHz Maximum peak I ^ ka Maximum Surge I s ka Charge energy W J Equivalent Series Resistance ESR m Equivalent Series Inductance ESL nh Thermal resistance R th K/W Product Symbol 300 85 70 Standard size 31 5 15 96 2.4 60 8.4 MLC2800V307KB8570 330 85 75 31 5 15 106 2.6 65 7.8 MLC2800V337KB8575 340 88.5 70 Standard size 33 6 18 109 2.2 60 8.1 MLC2800V347KB88570 370 85 80 31 5 15 118 2.8 65 7.2 MLC2800V377KB8580 88.5 75 33 6 18 118 2.4 65 7.5 MLC2800V377KB88575 410 88.5 80 33 6 18 131 2.6 65 6.9 MLC2800V417KB88580 440 100 70 Standard size 40 7 21 141 1.8 60 6.8 MLC2800V447KB10070 450 85 87 31 5 15 144 3.0 75 6.8 MLC2800V457KB8587 470 88.5 87 33 6 18 150 2.8 75 6.4 MLC2800V477KB88587 480 85 95 Standard size 30 5 15 154 3.4 80 6.4 MLC2800V487KB8595 490 100 75 40 7 21 157 1.9 65 6.4 MLC2800V497KB10075 530 88.5 95 Standard size 32 6 18 170 3.1 80 6.1 MLC2800V537KB88595 540 85 106 30 5 15 173 3.9 90 5.6 MLC2800V547KB85106 100 80 39 7 21 173 2.1 65 6.1 MLC2800V547KB10080 600 88.5 106 31 6 18 192 3.6 90 5.6 MLC2800V607KB885106 610 85 125 Standard size 57 10 30 195 1.2 40 5.0 MLC2800V617KB85125 100 87 39 7 21 195 2.3 75 5.6 MLC2800V617KB10087 620 116 70 Standard size 47 10 30 198 1.5 60 5.9 MLC2800V627KB11670 630 85 120 29 5 15 202 4.6 100 5.1 MLC2800V637KB85120 670 85 135 57 10 30 214 1.3 40 4.6 MLC2800V677KB85135 680 88.5 125 Standard size 62 11 33 218 1.1 40 4.6 MLC2800V687KB885125 116 75 47 10 30 218 1.6 65 5.5 MLC2800V687KB11675 690 100 95 Standard size 39 7 21 221 2.6 80 4.9 MLC2800V697KB10095 700 88.5 120 31 6 18 224 4.2 100 4.9 MLC2800V707KB885120 750 85 145 57 10 30 240 1.4 45 4.3 MLC2800V757KB85145 760 88.5 135 62 11 33 243 1.2 40 4.2 MLC2800V767KB885135 116 80 46 10 30 243 1.7 65 5.4 MLC2800V767KB11680 780 100 106 38 7 21 250 3.0 90 4.5 MLC2800V787KB100106 830 88.5 145 61 11 33 266 1.3 45 4.1 MLC2800V837KB885145 840 85 159 57 10 30 269 1.6 50 3.8 MLC2800V847KB85159 850 116 87 46 10 30 272 1.9 75 4.9 MLC2800V857KB11687 890 100 125 Standard size 71 15 45 285 1.0 40 3.9 MLC2800V897KB100125 920 100 120 37 7 21 294 3.4 100 4.2 MLC2800V927KB100120 930 140 70 Standard size 49 15 45 298 1.2 60 6.8 MLC2800V937KB14070 940 88.5 159 61 12 36 301 1.5 50 3.5 MLC2800V947KB885159 960 85 175 Standard size 56 10 30 307 1.8 55 3.5 MLC2800V967KB85175 970 116 95 Standard size 45 10 30 310 2.1 80 4.6 MLC2800V977KB11695 980 100 135 71 15 45 314 1.0 40 3.9 MLC2800V987KB100135 85 197 54 10 30 320 2.2 60 3.1 MLC2800V108KB85197 88.5 175 Standard size 59 11 33 320 1.7 55 3.3 MLC2800V108KB885175 1,000 100 145 69 14 42 320 1.2 45 3.4 MLC2800V108KB100145 116 106 44 10 30 320 2.5 90 4.0 MLC2800V108KB116106 140 75 49 15 45 320 1.3 65 6.2 MLC2800V108KB14075 1,100 140 80 49 15 45 352 1.4 65 5.8 MLC2800V118KB14080 85 225 54 10 30 384 2.5 70 2.7 MLC2800V128KB85225 88.5 197 60 12 36 384 1.9 60 2.9 MLC2800V128KB885197 1,200 100 159 70 15 45 384 1.2 50 3.3 MLC2800V128KB100159 116 120 43 10 30 384 2.8 100 3.8 MLC2800V128KB116120 116 125 Standard size 83 20 60 384 0.8 40 3.6 MLC2800V128KB116125 140 87 48 15 45 384 1.5 75 5.6 MLC2800V128KB14087 1,300 100 175 Standard size 69 14 42 416 1.4 55 3.0 MLC2800V138KB100175 116 135 83 20 60 416 0.9 40 3.2 MLC2800V138KB116135 1,400 88.5 225 59 11 33 448 2.2 70 2.6 MLC2800V148KB885225 140 95 Standard size 48 15 45 448 1.7 80 5.0 MLC2800V148KB14095 1,500 100 197 68 14 42 480 1.6 60 2.7 MLC2800V158KB100197 116 145 83 20 60 480 0.9 45 3.2 MLC2800V158KB116145 1,600 140 106 47 15 45 512 1.9 90 4.7 MLC2800V168KB140106 1,700 116 159 83 21 63 544 1.0 50 2.9 MLC2800V178KB116159 1,800 100 225 68 15 45 576 1.8 70 2.4 MLC2800V188KB100225 140 125 Standard size 86 30 90 576 0.7 40 3.8 MLC2800V188KB140125 1,900 116 175 Standard size 83 20 60 608 1.1 55 2.6 MLC2800V198KB116175 140 120 47 15 45 608 2.1 100 4.2 MLC2800V198KB140120 2,000 140 135 86 30 90 640 0.7 40 3.8 MLC2800V208KB140135 2,100 116 197 80 20 60 672 1.3 60 2.4 MLC2800V218KB116197 2,300 140 145 87 31 93 736 0.8 45 3.2 MLC2800V238KB140145 2,500 116 225 80 20 60 800 1.5 70 2.1 MLC2800V258KB116225 140 159 86 30 90 800 0.8 50 3.3 MLC2800V258KB140159 2,900 140 175 Standard size 86 31 93 928 0.9 55 3.0 MLC2800V298KB140175 3,300 140 197 86 31 93 1056 1.0 60 2.7 MLC2800V338KB140197 3,800 140 225 85 30 90 1216 1.2 70 2.3 MLC2800V388KB140225 Please inquire us in case low frequency (commercial frequency) or frequency above 10kHz is included in ripple. Maximum permissible ripple is calculated by the value in this table with frequency and temperature correction factors. Also the maximum must be controlled below the permissible terminal. Please refer useful life graph based on ambient temperature and voltage. HOTSPOT = T a +I 2 ESR R th 16

Standard Value and case size Rated d.c voltage U R : 900Vdc Nominal Capacitance C N μf Max.ripple voltage U r : 200V Non repetitive surge voltage U S : 1,350V Voltage test between terminals U TT : 1,350Vdc/10s Voltage test terminals to case. U TC : 3,200Vac/10s Dimensions Length of Diameter the case D L 1 mm mm Remarks Maximum ripple (Arms) I max * Arms/at50 1k ~ 10kHz Maximum peak I ^ ka Maximum Surge I s ka Charge energy W J Equivalent Series Resistance ESR m Equivalent Series Inductance ESL nh Thermal resistance R th K/W Product Symbol 230 85 70 Standard size 30 4 12 74 2.6 60 8.3 MLC2900V237KB8570 250 85 75 29 4 12 80 2.9 65 8.0 MLC2900V257KB8575 88.5 70 Standard size 31 5 15 80 2.5 60 8.1 MLC2900V257KB88570 280 85 80 29 4 12 90 3.1 65 7.5 MLC2900V287KB8580 88.5 75 31 5 15 90 2.6 65 7.8 MLC2900V287KB88575 310 88.5 80 31 5 15 99 2.9 65 7.0 MLC2900V317KB88580 320 85 87 29 5 15 102 3.4 75 6.8 MLC2900V327KB8587 350 88.5 87 31 5 15 112 3.2 75 6.3 MLC2900V357KB88587 100 70 Standard size 39 7 21 112 2.0 60 6.5 MLC2900V357KB10070 360 85 95 Standard size 28 4 12 115 3.8 80 6.5 MLC2900V367KB8595 390 100 75 38 7 21 125 2.1 65 6.4 MLC2900V397KB10075 400 88.5 95 Standard size 30 5 15 128 3.5 80 6.2 MLC2900V407KB88595 410 85 106 28 5 15 131 4.4 90 5.7 MLC2900V417KB85106 430 100 80 38 7 21 138 2.3 65 6.0 MLC2900V437KB10080 450 88.5 106 30 5 15 144 4.1 90 5.3 MLC2900V457KB885106 460 85 125 Standard size 55 9 27 147 1.4 40 4.6 MLC2900V467KB85125 470 100 87 37 7 21 150 2.6 75 5.6 MLC2900V477KB10087 116 70 Standard size 45 9 27 150 1.6 60 6.0 MLC2900V477KB11670 480 85 120 27 4 12 154 5.1 100 5.3 MLC2900V487KB85120 85 135 55 9 27 163 1.5 40 4.3 MLC2900V517KB85135 510 88.5 125 Standard size 59 10 30 163 1.3 40 4.3 MLC2900V517KB885125 116 75 45 9 27 163 1.7 65 5.7 MLC2900V517KB11675 530 88.5 120 29 5 15 170 4.7 100 4.9 MLC2900V537KB885120 540 100 95 Standard size 37 7 21 173 2.8 80 5.1 MLC2900V547KB10095 85 145 54 9 27 182 1.6 45 4.2 MLC2900V577KB85145 570 88.5 135 59 10 30 182 1.4 40 4.0 MLC2900V577KB885135 116 80 44 9 27 182 1.9 65 5.3 MLC2900V577KB11680 590 100 106 36 6 18 189 3.3 90 4.6 MLC2900V597KB100106 630 88.5 145 57 10 30 202 1.5 45 4.0 MLC2900V637KB885145 640 85 159 54 9 27 205 1.8 50 3.7 MLC2900V647KB85159 650 116 87 44 9 27 208 2.0 75 5.0 MLC2900V657KB11687 690 100 120 34 6 18 221 3.8 100 4.4 MLC2900V697KB100120 100 125 Standard size 69 13 39 221 1.0 40 4.0 MLC2900V697KB100125 710 88.5 159 57 10 30 227 1.6 50 3.8 MLC2900V717KB885159 140 70 Standard size 48 14 42 227 1.3 60 6.5 MLC2900V717KB14070 730 85 175 Standard size 54 9 27 234 2.0 55 3.4 MLC2900V737KB85175 116 95 Standard size 43 9 27 234 2.3 80 4.6 MLC2900V737KB11695 780 100 135 69 13 39 250 1.1 40 3.7 MLC2900V787KB100135 140 75 48 14 42 250 1.4 65 6.0 MLC2900V787KB14075 810 88.5 175 Standard size 57 10 30 259 1.8 55 3.4 MLC2900V817KB885175 820 85 197 53 9 27 262 2.3 60 3.0 MLC2900V827KB85197 830 116 106 43 9 27 266 2.6 90 4.1 MLC2900V837KB116106 860 100 145 68 13 39 275 1.2 45 3.5 MLC2900V867KB100145 870 140 80 47 14 42 278 1.5 65 5.9 MLC2900V877KB14080 910 88.5 197 56 10 30 291 2.1 60 3.0 MLC2900V917KB885197 930 100 159 68 13 39 298 1.4 50 3.0 MLC2900V937KB100159 940 116 125 Standard size 80 18 54 301 0.9 40 3.4 MLC2900V947KB116125 960 85 225 52 9 27 307 2.7 70 2.7 MLC2900V967KB85225 970 116 120 42 9 27 310 3.0 100 3.7 MLC2900V977KB116120 980 140 87 47 14 42 314 1.6 75 5.5 MLC2900V987KB14087 88.5 225 54 9 27 320 2.6 70 2.6 MLC2900V108KB885225 1,000 100 175 Standard size 66 12 36 320 1.6 55 2.8 MLC2900V108KB100175 116 135 79 17 51 320 0.9 40 3.5 MLC2900V108KB116135 100 197 64 13 39 352 1.8 60 2.7 MLC2900V118KB100197 1,100 116 145 78 17 51 352 1.0 45 3.2 MLC2900V118KB116145 140 95 Standard size 46 13 39 352 1.8 80 5.1 MLC2900V118KB14095 1,200 140 106 45 13 39 384 2.0 90 4.8 MLC2900V128KB140106 1,300 116 159 79 18 54 416 1.1 50 2.9 MLC2900V138KB116159 100 225 66 13 39 448 2.0 70 2.3 MLC2900V148KB100225 1,400 116 175 Standard size 78 17 51 448 1.3 55 2.5 MLC2900V148KB116175 140 120 45 13 39 448 2.4 100 4.0 MLC2900V148KB140120 140 125 Standard size 84 27 81 448 0.7 40 4.0 MLC2900V148KB140125 1,500 140 135 83 26 78 480 0.8 40 3.6 MLC2900V158KB140135 1,600 116 197 77 17 51 512 1.4 60 2.4 MLC2900V168KB116197 1,700 140 145 83 26 78 544 0.8 45 3.6 MLC2900V178KB140145 1,900 116 225 77 18 54 608 1.6 70 2.1 MLC2900V198KB116225 140 159 84 26 78 608 0.9 50 3.1 MLC2900V198KB140159 2,200 140 175 Standard size 84 27 81 704 1.0 55 2.8 MLC2900V228KB140175 2,500 140 197 83 27 81 800 1.1 60 2.6 MLC2900V258KB140197 2,900 140 225 81 27 81 928 1.3 70 2.3 MLC2900V298KB140225 Please inquire us in case low frequency (commercial frequency) or frequency above 10kHz is included in ripple. Maximum permissible ripple is calculated by the value in this table with frequency and temperature correction factors. Also the maximum must be controlled below the permissible terminal. Please refer useful life graph based on ambient temperature and voltage. HOTSPOT = T a +I 2 ESR R th 17

NEW! MKC-P4 Series (Resin-encased Metallized Polyester Film Capacitors) Features Suitable for DC filter and DC link circuit Plastic case and filling resin materials conform to UL94V-0 Specifications Items Operating Temperature range Rated Voltage U R Voltage test between terminals Terminals Description - 40 ~+ 105 (voltage derating is required at +85 ) 700, 900, 1,100 V.DC 1.5 U R/10s lead (1.0φ,1.2φ) Life Time Test / Standard IEC 61071 : 2007 Dielectric polypropylene Electrode no internal safety device (optional : segmented metallization design) Case UL94-V0 Filling material UL94-V0 Environmental regulations Comply with RoHS Dimension Case (mm) Lead (mm) L T H P1 P2 d 43.0 21.5 38.5 37.5 10.2 1.0 42.0 30.0 45.0 37.5 20.3 1.0 57.5 25.0 45.0 52.5 10.2 1.2 57.5 35.0 50.0 52.5 20.3 1.2 57.5 35.0 60.0 52.5 20.3 1.2 Product symbol : (Example) MKC-P4 Series 700V.DC 20μF ±10% MKC-P4-700V 206 K S Type of series Suffix Capacitance tolerance codfe Capacitance codfe Rated voltage code Outline of drawings and dimensions L T Circuitry Marking H P1 φd P2 6 +0-2 Standard Value and case size Rated d.c voltage U R : 700Vdc Voltage test between terminals U TT : 1,050Vdc/10s 70 =800vdc, 85 =700vdc, 105 =500vdc Nominal Capacitance C N μf L mm Dimensions T mm H mm dv/dt dv/dt V/us Maximum peak Ipeak A Maximum ripple (Arms) I max Arms/at85 1k ~ 10kHz Equivalent Series Resistance ESR m Equivalent Series Inductance ESL nh Product Symbol 20 43.0 21.5 38.5 40 800 12.0 6.0 30 MKC-P4-700V206K 30 42.0 30.0 45.0 40 1200 17.0 4.0 30 MKC-P4-700V306K 35 42.0 30.0 45.0 40 1400 18.5 3.5 30 MKC-P4-700V356KS 35 57.5 25.0 45.0 20 700 12.5 7.0 35 MKC-P4-700V356K 40 57.5 25.0 45.0 20 800 13.5 6.0 35 MKC-P4-700V406K 55 57.5 35.0 50.0 20 1100 18.0 4.5 35 MKC-P4-700V556K 60 57.5 35.0 50.0 20 1200 19.0 4.0 35 MKC-P4-700V606K 65 57.5 35.0 50.0 20 1300 20.5 3.5 35 MKC-P4-700V656K 70 57.5 35.0 60.0 20 1400 20.5 3.5 35 MKC-P4-700V706K 80 57.5 35.0 60.0 20 1600 21.5 3.0 35 MKC-P4-700V806K Rated d.c voltage U R : 900Vdc Voltage test between terminals U TT : 1,350Vdc/10s 70 =1,100vdc, 85 =900vdc, 105 =650vdc 10 43.0 21.5 38.5 40 400 9.0 11.0 30 MKC-P4-900V106K 12 43.0 21.5 38.5 40 480 10.0 9.0 30 MKC-P4-900V126K 15 57.5 25.0 45.0 20 300 9.5 12.0 35 MKC-P4-900V156K 20 42.0 30.0 45.0 40 800 15.5 5.0 30 MKC-P4-900V206KS 20 57.5 25.0 45.0 20 400 10.0 11.0 35 MKC-P4-900V206K 35 57.5 35.0 50.0 20 700 15.5 6.0 35 MKC-P4-900V356K 40 57.5 35.0 50.0 20 800 17.0 5.0 35 MKC-P4-900V406K 45 57.5 35.0 60.0 20 900 16.5 5.0 35 MKC-P4-900V456K 50 57.5 35.0 60.0 20 1000 18.5 4.0 35 MKC-P4-900V506K Rated d.c voltage U R : 1,100Vdc Voltage test between terminals U TT : 1,650Vdc/10s 70 =1,300vdc, 85 =1,100vdc, 105 =800vdc 7 43.0 21.5 38.5 45 310 8.5 11.5 30 MKC-P4-1100V705K 8 43.0 21.5 38.5 45 360 9.5 10.0 30 MKC-P4-1100V805K 10 57.5 25.0 45.0 23 230 8.5 16.0 35 MKC-P4-1100V106K 12 42.0 30.0 45.0 45 540 13.5 6.5 30 MKC-P4-1100V126K 15 57.5 25.0 45.0 23 340 10.5 10.5 35 MKC-P4-1100V156K 22 57.5 35.0 50.0 23 500 14.5 7.0 35 MKC-P4-1100V226K 25 57.5 35.0 50.0 23 550 15.0 6.5 35 MKC-P4-1100V256K 30 57.5 35.0 60.0 23 690 16.5 5.0 35 MKC-P4-1100V306K 18

MEMO 19

NEW! E51 / E51(AC) Series Features High voltage range and low inductance capacitors. E51 series are made in dry technology. Capacitors both for AC/DC application are available. (Cylindrical Metallized Polypropylene Film Capacitors) Specifications E51(DC)Series (for DC) Item Specification Category temperature range -25 ~+ 70 (Includes self temperature rise) Storage temperature -40 ~+ 85 Rated voltage U N 1,000 ~ 50,000Vdc Terminal (torque) M8 12 (7Nm) Standards IEC 61071 : 2007 Dielectric Polypropylene Dielectric dissipation factor (tanδ 0 ) 2 10-4 Capacitance tolerance ±10% (optional ±5%) Safety devices - Impregnant Solid resin based on vegetable oil, Non PCB Material of case Plastic (UL94V-0) Environmental regulations Comply with RoHS E51(AC)Series (for AC) Item Specification Category temperature range -25 ~+ 70 (Includes self temperature rise) Storage temperature -40 ~+ 85 Rated voltage U N 2,000 ~ 3,5000Vac (3,200 ~ 50,000Vdc) Terminal (torque) M8 12 (7Nm) Standards IEC 61071 : 2007 Dielectric Polypropylene Dielectric dissipation factor (tanδ 0 ) 2 10-4 Capacitance tolerance ±10% (optional ±5%) Safety devices - Impregnant Solid resin based on vegetable oil, Non PCB Material of case Plastic (UL94V-0) Environmental regulations Comply with RoHS D(refer to catalog) 20 Dimensions L(refer to catalog) L+8 Item Terminal code Can material Terminal Degree of protection Humidity class Clearance in air Creepage distance Specification R2 Plastic (UL94V-0) Axial thread M8 12 Torque : 7Nm I max (terminal) : 100A IP00 F L+ D - 20mm L+ D - 20mm M8 12 20

Standard Value and Case Size (E51Series) Rated DC Voltage U N (DC) Vdc Rated Capacitance C N μf Case size Diameter D mm Length L mm Rated ripple voltage U r V Rated DC voltage U N(DC): 1,300 ~ 2,700Vdc Surge voltage U s V Energy Contents W J Series resistance (reference) R S m Thermal resistance (reference) R th K/W Max Max peak I max Î Arms ka Max surge I S ka Self inductance (reference) ESL nh Weight kg Part number 1,300 700 140 175 300 1,950 592 0.39 3 80 9.30 28.00 30 2.8 E51.S18-704R20/H 2,300 80 64 355 400 4,100 212 1.3 3.6 50 4.00 13.00 80 1.2 E51.L35-803R20/H 2,300 170 90 355 400 4,100 450 0.6 2.4 90 6.00 17.00 100 2.4 E51.P35-174R20/H 2,500 25 90 130 800 3,750 78 0.96 6.4 70 3.10 9.30 30 0.9 E51.P13-253R20/H 2,500 50 90 170 800 3,750 156 1.3 4.9 70 3.10 9.30 50 1.1 E51.P17-503R20/H 2,700 40 140 125 500 4,050 146 0.85 2.55 40 5.00 15.00 20 2.0 E51.S12-403R20/H Rated DC voltage U N(DC): 3,000 ~ 3,600Vdc 3,000 18 90 150 600 4,500 81 0.62 5.5 65 2.80 8.40 50 1.1 E51.P15-183R20/H 3,000 80 90 255 700 4,500 360 1.9 3.2 60 3.20 9.60 60 1.7 E51.P25-803R20/H 3,000 350 140 355 600 4,500 1,575 1.5 1.5 75 8.40 25.20 100 5.7 E51.S35-354R20/H 3,000 400 140 460 600 4,500 1,800 0.85 1.2 100 15.40 46.20 120 7.4 E51.S46-404R20/H 3,100 86 90 355 500 5,600 413 1.5 2.4 65 4.50 13.00 100 2.4 E51.P35-863R20/H 3,200 15 64 200 700 4,800 77 2.3 5.8 35 1.00 3.00 50 0.7 E51.L20-153R20/H 3,200 33 90 200 700 4,800 169 0.7 4.1 70 2.50 7.50 50 1.3 E51.P20-333R20/H 3,500 500 140 710 600 5,250 3,063 1.2 0.75 100 13.90 41.70 200 11.5 E51.S71-504R20/H 3,600 80 116 245 600 5,400 518 0.71 2.6 90 6.00 18.00 40 2.1 E51.R24-803R20/H 3,600 220 140 300 800 5,400 1,426 0.6 1.1 40 4.40 13.20 40 5.0 E51.S30-224R20/H Rated DC voltage U N(DC): 4,000 ~ 5,600Vdc 4,000 8 116 170 2,850 6,000 64 1.40 3.8 25 2.10 6.30 100 1.9 E51.R17-802R20/H 4,000 16 140 170 2,850 6,000 128 1.10 3.1 30 3.80 11.40 100 2.7 E51.S17-163R20/H 4,000 215 140 565 800 6,000 1,720 0.70 0.95 100 11.90 35.70 60 9.0 E51.S56-224R20/H 4,200 8 64 138 800 6,300 71 4.30 8.3 15 0.69 2.07 60 0.5 E51.L14-802R20/H 4,200 45 90 355 800 6,300 397 1.60 2.4 50 4.20 12.60 80 2.4 E51.P35-453R20/H 4,400 8 64 180 950 6,600 77 4.20 6.5 20 0.85 2.55 60 0.6 E51.L18-802R20/H 4,400 8 90 130 950 6,600 77 1.40 6.4 20 1.70 5.10 50 0.9 E51.P13-802R20/H 4,500 300 140 710 850 6,750 3,038 1.10 0.75 100 16.50 49.50 200 11.5 E51.S71-304R20/H 4,700 187.5 140 430 1,000 7,050 2,071 3.20 0.7 50 4.25 12.75 40 7.0 E51.S43-194R20/H 5,000 4.55 64 150 1,000 7,500 57 6.50 7.8 15 0.47 1.41 60 0.5 E51.L15-462R20/H 5,600 1 64 120 1,100 8,400 16 4.60 9.7 20 0.70 2.20 20 1.0 E51.L12-102R20/H Rated DC voltage U N(DC): 6,000 ~ 9,300Vdc 6,000 30 116 200 700 9,000 540 2.3 3.2 30 2.10 6.30 80 2.2 E51.R20-303R20/H 6,200 6.8 64 255 1,200 9,300 131 10 4.6 20 0.60 2.00 50 0.9 E51.L25-682R20/H 6,200 15 90 255 1,200 9,300 288 4.6 3.2 35 1.50 4.50 50 1.7 E51.P25-153R20/H 6,300 20 90 355 1,200 9,450 397 6.8 2.4 25 1.80 8.00 100 2.4 E51.P35-203R20/H 6,300 51.25 140 355 1,200 9,450 1,017 2.7 1.5 40 4.30 20.00 80 5.7 E51.S35-513R20/H 8,000 5 90 220 1,400 12,000 160 1.7 3.76 50 1.80 5.00 80 1.5 E51.P22-502R20/H 8,000 10 90 320 1,400 12,000 320 2.3 2.59 50 1.90 6.00 100 2.2 E51.P32-103R20/H 8,000 40 140 355 1,400 12,000 1,280 3.5 1.5 40 2.70 8.10 100 5.7 E51.S35-403R20/H 8,500 0.22 64 165 1,400 12,750 8 6.9 7.1 20 0.90 2.90 50 0.6 E51.L16-221R20/H 8,500 0.5 64 165 3,950 12,750 18 3.9 7.1 20 0.54 1.62 60 0.6 E51.L16-501R20/H 8,500 1 90 165 1,400 12,750 36 2.5 5 25 1.70 5.10 50 1.1 E51.P16-102R20/H 9,300 9 90 355 1,500 13,950 389 8 2.3 20 1.00 4.00 100 2.4 E51.P35-902R20/H 9,300 25 140 355 1,500 13,950 1,081 2.7 1.5 40 4.00 11.00 100 5.7 E51.S35-253R20/H Rated DC voltage U N(DC): 10,000 ~ 50,000Vdc 10,000 0.25 64 165 2,000 15,000 13 15.2 7.1 10 1.1 3.3 80 0.6 E51.L16-251R20/H 10,000 4 116 320 2,000 15,000 200 3.5 2 50 1.5 4.5 60 3.5 E51.R32-402R20/H 10,000 4.5 140 480 3,000 15,000 225 1.8 1.1 50 8.8 26.4 100 8.0 E51.S48-452R20/H 10,000 10 90 355 2,500 15,000 500 7 2.3 25 1.3 3.9 100 2.4 E51.P35-103R20/H 12,000 24 140 565 2,100 18,000 1,728 4.2 0.95 25 4.2 12.6 60 9.0 E51.S56-243R20/H 12,500 0.22 64 200 2,100 18,750 17 14 5.8 20 0.5 1.4 80 0.7 E51.L20-221R20/H 12,500 0.25 64 200 2,100 18,750 20 14 5.8 20 0.5 1.5 80 0.7 E51.L20-251R20/H 12,500 1 116 200 2,100 18,750 78 3.6 3.2 35 2 6 80 2.2 E51.R20-102R20/H 13,000 0.25 64 285 3,000 19,500 21 17.7 4.1 10 0.6 1.7 100 1.0 E51.L28-251R20/H 14,000 5 116 355 2,400 21,000 490 3.6 1.8 30 2.5 7.5 100 4.0 E51.R35-502R20/H 14,000 10 140 355 2,400 21,000 980 2.4 1.5 40 4.3 12.9 120 5.7 E51.S35-103R20/H 15,000 1 60 285 3,600 22,500 113 15.1 4.1 15 0.49 1.47 100 1.0 E51.L28-102R20/H 15,000 2 90 285 3,600 22,500 225 7.2 2.9 20 1.1 3.3 200 1.9 E51.P28-202R20/H 15,000 10 140 385 3,600 22,500 1,125 2.7 1.4 40 3.8 11.4 120 6.2 E51.S38-103R20/H 15,000 15 140 460 3,600 22,500 1,688 2.8 1.2 40 4.6 13.8 120 7.4 E51.S46-153R20/H 15,000 20 140 565 3,600 22,500 2,250 3.7 0.94 40 3.8 11.4 120 9.1 E51.S56-203R20/H 20,000 1.25 90 355 4,000 30,000 250 11.7 2.3 20 0.9 2.7 100 2.4 E51.P35-132R20/H 20,000 1.5 90 355 4,000 30,000 300 10.4 2.3 34 1.8 5.4 100 2.4 E51.P35-152R20/H 25,000 10 140 710 4,600 37,500 3,125 3.9 0.75 35 4.3 12.9 200 11.5 E51.S71-103R20/H 30,000 1 90 435 4,800 45,000 450 11 1.9 20 1 3 80 2.9 E51.P44-102R20/H 30,000 5 140 710 4,800 45,000 2,250 7 0.75 35 2.8 8.4 200 11.5 E51.S71-502R20/H 35,000 0.2 90 435 5,600 52,500 123 13.4 1.9 20 1 3 80 2.9 E51.P44-201R20/H 35,000 5 140 785 4,800 52,500 3,063 5.5 0.7 25 3.2 9.6 200 12.7 E51.S78-502R20/H 40,000 2.2 140 630 8,700 60,000 1,760 5.3 0.84 35 2.8 8.4 180 10.2 E51.S63-222R20/H 50,000 0.5 140 710 10,000 60,000 625 5.8 0.75 35 2.9 8.7 200 11.5 E51.S71-501R20/H 21

Standard Value and Case Size (E51series (AC)) Rated AC Voltage U N (AC) Vdc Rated DC Voltage U N (DC) Vdc Rated Capacitance C N μf Case size Diameter D mm Length L mm Rated AC voltage U N(AC): 2,000 ~ 3,250Vac Rated ripple voltage U r V Surge voltage U s V Energy Contents W J U rms: 1,650 ~ 2,300V rms Series resistance (reference) R S m Thermal resistance (reference) R th Max I max Max peak Î K/W Arms ka Max surge I S ka Self inductance Weight (reference) ESL nh kg Part number 2,350 4,500 1.5 64 150 1,650 6,750 15 5.4 7.8 20 0.7 2 20 0.5 E51.L15-152R20/H 2,350 3 64 250 1,650 3,525 8.3 3 4.7 15 1.1 3.3 60 1.0 E51.L25-302R20/H 2,500 6,000 1 90 130 1,770 9,000 18 3.2 6.4 28 0.98 2.94 30 0.9 E51.P13-102R20/H 2,550 3,200 1 64 120 1,800 4,800 5 1.8 9.7 40 2 5 40 0.4 E51.L12-102R21/H 2,700 4,400 4 116 110 1,910 6,600 39 0.62 5.8 90 2.2 7 15 1.5 E51.R11-402R20/H 2,900 5,000 3 116 100 2,050 7,500 38 0.74 5.8 80 2 6 15 1.2 E51.R11-3-2R20/H 3,000 0.47 64 100 2,100 6,450 2.1 3.2 11.6 15 1.1 3.3 60 0.3 E51.L10-471R20/H 3,000 5 116 260 2,200 7,000 22.5 3.8 2.5 10 2 6 80 2.9 E51.R26-502R20/H 3,250 0.75 64 165 2,300 4,875 4.0 4.9 7.1 20 0.9 2.8 100 0.6 E51.L16-751R20/H 3,200 7,280 0.5 64 130 2,260 10,920 13.2 5 9 25 0.62 1.86 60 0.4 E51.L13-501R20/H Rated AC voltage U N(AC): 3,500Vac U rms: 2,500V rms 3,500 6,000 0.22 64 120 2,500 9,000 4.0 4.8 9.7 20 0.7 2.1 60 0.4 E51.L12-221R20/H 3,500 6,000 0.25 64 120 2,500 9,000 4.5 5.4 9.7 15 0.8 2.4 60 0.4 E51.L12-251R20/H 3,500 6,000 0.33 64 120 2,500 9,000 5.9 3 9.7 20 1 2.9 60 0.4 E51.L12-331R20/H 3,500 6,000 0.5 64 120 2,500 9,000 9.0 5.6 9.7 20 1 3 60 0.4 E51.L12-501R20/H 3,200 5,450 0.68 64 120 2,250 9,000 10.1 4.6 9.7 20 1 2.9 60 0.4 E51.L12-681R20/H 3,500 6,000 0.75 90 100 2,500 9,000 13.5 1.6 8.3 40 1.8 5.4 60 0.6 E51.P10-751R20/H 3,500 6,000 1.25 90 130 2,500 9,000 22.5 2.2 6.4 45 1.4 4.2 60 0.9 E51.P13-132R20/H 3,500 6,000 1.5 90 130 2,500 9,000 27.0 2.1 6.4 45 1.5 4.4 60 0.9 E51.P13-152R20/H 2,450 6,000 2 90 140 1,700 9,000 36.0 2.8 5.9 45 1.5 4.4 60 1.0 E51.P14-202R20/H Rated AC voltage U N(AC): 3,850 ~ 4,300Vac U rms: 2,700 ~ 3,050V rms 3,850-2.5 90 285 2,700 5,775 18.5 4.1 2.9 25 2 6 100 1.9 E51.P28-252R20/H 4,200-1.1 90 150 3,000 6,300 9.7 2.7 5.5 20 1.6 4.8 50 1.0 E51.P15-112R20/H 4,300-0.5 64 165 3,050 6,450 4.6 5.3 7.1 15 0.8 2.3 100 0.6 E51.L16-501R21/H 4,300-0.8 64 200 3,050 6,450 7.4 7.5 5.8 15 0.9 2.7 100 0.7 E51.L20-801R20/H Rated AC voltage U N(AC): 4,550Vac U rms: 3,200V rms 4,550 7,280 0.22 64 130 3,200 10,920 5.8 8.9 9 15 0.34 1.02 60 0.5 E51.L13-221R20/H 4,550 7,280 0.33 64 130 3,200 10,920 8.7 6.7 9 20 0.46 1.38 60 0.5 E51.L13-331R20/H 3,150 7,280 0.75 90 130 2,200 10,920 19.9 3 6.4 40 1 3 60 0.9 E51.P13-751R20/H 2,500 6,000 1 90 130 1,770 9,000 18.0 3.2 6.4 28 0.98 2.94 30 0.9 E51.P13-102R20/H 4,400 6,800 1.5 90 150 3,100 10,200 34.7 2.3 5.5 25 1 3 50 1.0 E51.P15-152R21/H 4,550-1.1 90 275 3,200 6,825 11.4 3.6 3 20 2.4 7.2 80 1.9 E51.P27-112R20/H 2,800 4,400 1.25 90 140 2,000 10,920 12.1 4.5 6.4 40 1.2 3.6 60 1.0 E51.P14-132R20/H 4,550 7,280 1.5 116 130 3,200 10,920 39.7 2 4.9 50 2.1 6.3 60 1.1 E51.R13-152R20/H 4,550 7,280 2 116 130 3,200 10,920 53.0 1.8 4.9 55 2.4 7.2 60 1.1 E51.R13-202R20/H Rated AC voltage U N(AC): 4,700 ~ 5,850Vac U rms: 3,300 ~ 4,150V rms 4,700 0.75 64 250 3,300 7,050 8.3 7.5 4.7 15 0.9 2.7 60 1.0 E51.L25-751R20/H 5,000 0.47 64 210 3,500 10,750 5.9 5.8 5.5 16 1 3 40 0.8 E51.L21-471R20/H 5,000 10,000 0.5 90 200 3,540 15,000 25.0 5.7 4.1 1 3 50 50 1.3 E51.P20-501R20/H 5,000 10,000 1 90 255 3,540 7,500 50.0 5.8 3.25 25 1.2 3.6 50 1.7 E51.P25-102R20/H 5,100-1.6 116 355 3,600 9,500 20.8 4 1.8 25 5 15 120 3.9 E51.R35-162R20/H 5,100-2.4 90 200 3,600 10,965 31.2 3 4.1 35 1.4 4.2 60 1.3 E51.P20-242R21/H 5,100-2.6 116 460 3,600 9,500 33.8 3.8 1.4 25 5 15 120 4.9 E51.R46-262R20/H 5,200-1.1 90 200 3,700 7,800 14.9 3.1 4.1 20 5.1 3.1 60 1.3 E51.P20-112R20/H 5,850-0.47 90 165 4,150 12,580 8.0 3.5 5 20 2.2 6.6 60 1.2 E51.P16-471R20/H Rated AC voltage U N(AC): 6,000 ~ 9,620Vac U rms: 4,600 ~ 6,800V rms 6,300 9,000 0.13 64 165 4,450 13,500 5.3 5.5 7.1 20 0.8 2.4 100 0.6 E51.L16-131R20/H 6,300 9,000 0.14 64 200 4,450 13,500 5.7 17.6 5.8 14 0.3 0.9 50 0.7 E51.L20-141R20/H 6,500-4 140 355 4,600 9,500 84.5 1.7 1.5 12 7 21 150 5.7 E51.S35-402R20/H 7,500-1.33 140 355 5,300 11,250 37.4 3.9 1.5 10 2.5 7.5 100 5.7 E51.S35-132R20/H 8,900-0.24 90 210 6,300 13,350 9.5 5 3.94 20 2 6 60 1.4 E51.P21-241R20/H 9,200-0.5 90 275 6,510 13,800 21.2 3.9 3 10 1.7 5.1 80 1.9 E51.P27-501R20/H 9,620-0.5 116 250 6,800 14,430 23.1 3 2.6 40 3.7 11.1 60 2.9 E51.R25-501R20/H Rated AC voltage U N(AC): 10,000 ~ 35,000Vac U rms: 7,100 ~ 25,000V rms 10,000 14,000 1 116 390 7,100 15,000 98.0 3.4 1.7 25 3.7 11.1 100 4.0 E51.R39-102R20/H 10,000 14,000 1.9 140 390 7,100 15,000 186.2 2.1 1.4 25 6.2 18.6 100 6.0 E51.S39-192R20/H 12,750-0.2 90 355 9,000 27,400 16.3 7 2.3 20 2.3 6.9 100 2.4 E51.P35-201R20/H 10,000-0.5 90 355 7,070 15,000 25.0 7.2 1.44 10 1 3 100 2.4 E51.P35-501R20/H 20,000 26,000 0.3 116 355 14,000 30,000 101.4 3.1 1.8 10 8 20 100 3.9 E51.R35-301R20/H 20,000 30,000 1 140 710 14,140 45,000 450.0 5.7 0.7 10 4.9 14.7 200 11.5 E51.S71-102R20/H 20,000 50,000 0.5 140 710 14,140 60,000 625.0 6.2 0.7 10 8.5 20 200 11.5 E51.S71-501R20/H 22

NEW! E53(AC) Series Features High voltage range and ultra low inductance capacitors. E53(AC) series are made in dry technology. For AC application. (AC Cylindrical Metallized Polypropylene Film Capacitors) Specifications Item Specification Category temperature range - 25 ~+ 70 ( + 85 / Includes self temperature rise) Storage temperature - 40 ~+ 85 Rated voltage (U N) 280 ~ 2,450Vac (500 ~ 7,200Vdc) Terminal (torque) M6 10 (7Nm) / M8 10 (7Nm) Standards IEC 61071 : 2007 Dielectric Polypropylene Dielectric dissipation factor (tanδ 0 ) 2 10-4 Capacitance tolerance ±10% (optional ±5%) Safety devices - Impregnant Solid resin based on vegetable oil, Non PCB Material of case Plastic (UL94V-0) Environmental regulations Comply with RoHS Dimensions Item Terminal code Can material T1 Terminal T2 Degree of protection Humidity class Specification T1 / T2 Plastic (UL94V-0) Axial thread M6 10 Torque : 4Nm I max (terminal) : 60A Axial thread M8 10 Torque : 7Nm I max (terminal) : 100A IP00 G D(refer to catalog)) T1 M6 10 T2 M8 10 L(refer to catalog) L+7 L(refer to catalog) L+7 14 20 23

Standard Value and Case Size Rated Capacitance C N μf Case size Diameter Length D L mm mm Energy Contents W J Series resistance (reference) R S m Thermal resistance (reference) R th K/W Max Max peak I max Î Arms ka Rated voltage U N:550Vdc / 280Vac U rms: 200V rms Us: 825V U TT: 825Vdc Max surge I S ka Self inductance (reference) ESL nh Terminal Clearance in air L mm Creepage distance K mm Weight kg Part number 50 55 56 7.6 0.8 8.5 60 0.83 2.5 15 T1 97 97 0.18 E53.H56-503T10/H 100 75 56 15 0.4 6.3 80 1.7 5 15 T2 111 111 0.33 E53.M56-104T20/H 200 95 56 30 0.2 4.9 80 3.3 9.9 15 T2 131 131 0.52 E53.P56-204T20/H 250 105 56 38 0.15 4.5 80 3.3 10 15 T2 141 141 0.64 E53.P56-204T20/H 270 115 56 41 0.15 4.1 100 3.3 10 15 T2 151 151 0.77 E53.R56-274T20/H 380 115 100 57 0.31 2.3 100 3 10 15 T2 195 195 1.37 E53.R10-384T20/H Rated voltage U N:700Vdc / 350Vac U rms: 250V rms Us: 1,050V U TT: 1,050Vdc 33 55 56 8.1 0.95 8.5 55 0.68 2.1 15 T1 97 97 0.18 E53.H56-333T10/H 68 75 56 17 0.5 6.3 80 1.4 4.2 15 T2 111 111 0.33 E53.M56-683T20/H 120 95 56 29 0.3 4.9 80 2.5 7.4 15 T2 131 131 0.52 E53.P56-124T20/H 150 105 56 37 0.25 4.5 100 3.1 9.3 15 T2 141 141 0.64 E53.Q56-154T20/H 200 115 56 49 0.2 4.1 100 3.1 10 15 T2 151 151 0.77 E53.R56-204T20/H 310 115 100 76 0.3 2.3 100 3 10 15 T2 195 195 1.37 E53.R10-314T20/H Rated voltage U N:900Vdc / 350Vac U rms: 250V rms Us: 1,350V U TT: 1,350Vdc 30 55 56 12 0.85 8.5 60 0.68 2.1 15 T1 97 97 0.18 E53.H56-303T10/H 60 75 56 24 0.5 6.3 80 1.4 4.1 15 T2 111 111 0.33 E53.M56-603T20/H 100 95 56 41 0.35 4.9 80 2.3 6.8 15 T2 131 131 0.52 E53.P56-104T20/H 120 105 56 49 0.2 4.5 100 2.8 9 15 T2 141 141 0.64 E53.Q56-124T20/H 140 115 56 57 0.2 4.1 100 3.1 10 15 T2 151 151 0.77 E53.R56-144T20/H 265 115 100 107 0.35 2.3 110 3 9 15 T2 195 195 1.37 E53.R10-274T20/H Rated voltage U N:1,100Vdc / 350Vac U rms: 250V rms Us: 1,650V U TT: 1,650Vdc 12 55 56 7.3 1.7 8.5 40 0.4 1.2 15 T1 97 97 0.18 E53.H56-123T10/H 15 55 56 9.1 1.1 8.5 40 0.5 1.5 15 T1 97 97 0.18 E53.H56-153T10/H 25 75 56 15 0.71 6.3 70 0.83 2.5 15 T2 111 111 0.33 E53.M56-253T20/H 50 95 56 30 0.34 4.9 80 1.7 5 15 T2 131 131 0.52 E53.P56-503T20/H 60 105 56 36 0.35 4.5 100 2.0 6 15 T2 141 141 0.64 E53.Q56-603T20/H 80 115 56 48 0.21 4.1 100 3.0 10 15 T2 151 151 0.77 E53.R56-803T20/H 175 115 100 106 0.41 2.3 100 2.6 8 15 T2 195 195 1.37 E53.R10-184T20/H Rated voltage U N:1,400Vdc / 350Vac U rms: 250V rms Us: 2,100V U TT: 2,100Vdc 8 55 56 7.8 2 8.5 38 0.33 1 15 T1 97 97 0.18 E53.H56-802T10/H 16 75 56 16 1 6.3 80 0.66 2 15 T2 111 111 0.33 E53.M56-163T20/H 30 95 56 29 0.55 4.9 80 1.2 3.7 15 T2 131 131 0.52 E53.P56-303T20/H 40 105 56 39 0.4 4.5 100 1.7 5 15 T2 141 141 0.64 E53.Q56-403T20/H 50 115 56 49 0.3 4.1 100 2.2 10 15 T2 151 151 0.77 E53.R56-503T20/H 110 115 100 108 0.52 2.3 100 2 6 15 T2 195 195 1.37 E53.R10-114T20/H Rated voltage U N:1,700Vdc / 700Vac U rms: 500V rms Us: 2,550V U TT: 2,550Vdc 4.7 55 56 6.8 1.3 8.5 45 0.5 1.6 15 T1 97 97 0.18 E53.H56-472T10/H 10 75 56 14 0.6 6.3 80 1.1 3.5 15 T2 111 111 0.33 E53.M56-103T20/H 16 95 56 23 0.37 4.9 80 1.8 5.5 15 T2 131 131 0.52 E53.P56-163T20/H 22 105 56 32 0.27 4.5 100 2.5 7.5 15 T2 141 141 0.64 E53.Q56-223T20/H 33 115 56 48 0.2 4.1 100 3.5 10 15 T2 151 151 0.77 E53.R56-333T20/H 68 115 100 98 0.35 2.3 100 3.1 9.3 15 T2 195 195 1.37 E53.R10-683T20/H Rated voltage U N:2,000Vdc / 700Vac U rms: 500V rms Us: 3,000V U TT: 3,000Vdc 3.3 55 56 6.6 1.6 8.5 40 0.42 1.2 15 T1 97 97 0.18 E53.H56-332T10/H 8 75 56 16 0.65 6.3 80 1 3 15 T2 111 111 0.33 E53.M56-802T20/H 14 95 56 28 0.35 4.9 80 1.8 5.5 15 T2 131 131 0.52 E53.P56-143T20/H 18 105 56 36 0.3 4.5 100 2.3 7 15 T2 141 141 0.64 E53.Q56-183T20/H 24 115 56 48 0.2 4.1 100 3 10 15 T2 151 151 0.77 E53.R56-243T20/H 52.5 115 100 105 0.39 2.3 100 2.8 8 15 T2 195 195 1.37 E53.R10-533T20/H Rated voltage U N:2,250Vdc / 700Vac U rms: 500V rms Us: 3,375V U TT: 3,375Vdc 2.5 55 56 6.3 1.8 8.5 40 0.37 1.1 15 T1 97 97 0.18 E53.H56-252T10/H 6 75 56 15 0.76 6.3 70 0.88 2.6 15 T1 111 111 0.33 E53.M56-602T20/H 10 95 56 25 0.46 4.9 80 1.5 4.5 15 T2 131 131 0.52 E53.P56-103T20/H 15 105 56 38 0.27 4.5 100 2.1 6.2 15 T2 141 141 0.64 E53.Q56-153T20/H 18 115 56 46 0.25 4.1 100 2.6 10 15 T2 151 151 0.77 E53.R56-183T20/H 40 115 100 101 0.45 2.3 100 2.4 7 15 T2 195 195 1.37 E53.R10-403T20/H Rated voltage U N:2,800Vdc / 700Vac U rms: 500V rms Us: 4,200V U TT: 4,200Vdc 1.5 55 56 5.9 2.4 8.5 32 0.27 1.35 15 T1 97 97 0.18 E53.H56-152T10/H 3.3 75 56 13 1.1 6.3 60 0.6 3 15 T2 111 111 0.33 E53.M56-332T20/H 7.5 95 56 29 0.5 4.9 80 1.5 7.5 15 T2 131 131 0.52 E53.P56-752T20/H 10 105 56 39 0.4 4.5 100 1.8 9 15 T2 141 141 0.64 E53.Q56-103T20/H 12 115 56 47 0.3 4.1 100 2.2 12 15 T2 151 151 0.77 E53.R56-123T20/H 25 115 100 98 0.57 2.3 100 1.9 6 15 T2 195 195 1.37 E53.R10-253T20/H Rated voltage U N:3,200Vdc / 1,050Vac U rms: 750V rms Us: 4,800V U TT: 4,800Vdc 1 55 56 5.1 1.6 8.5 40 0.35 1.75 15 T1 97 97 0.18 E53.H56-102T10/H 2.5 75 56 13 0.65 6.3 75 0.9 4.5 15 T2 111 111 0.33 E53.M56-252T20/H 4 95 56 20 0.4 4.9 80 1.5 7.5 15 T2 131 131 0.52 E53.P56-402T20/H 6 105 56 31 0.28 4.5 100 2.2 11 15 T2 141 141 0.64 E53.Q56-602T20/H 7 115 56 36 0.25 4.1 100 3 12 15 T2 151 151 0.77 E53.R56-702T20/H 24

NEW! E53H Series Features High voltage range and ultra low inductance capacitors. E53H series are made in dry technology. Robust studs with M8 thread allows for radial connection. (DC Cylindrical Metallized Polypropylene Film Capacitors) Specifications Item Specification Category temperature range - 25 ~+ 70 ( + 85 / Includes self temperature rise) Storage temperature - 40 ~+ 85 Rated voltage (U N) 600 ~ 2,200Vdc Terminal (torque) M8 20 (4Nm) Standards IEC 61071 : 2007 Dielectric Polypropylene Dielectric dissipation factor (tanδ 0 ) 2 10-4 Capacitance tolerance ±10% (optional ±5%) Safety devices - Impregnant Solid resin based on vegetable oil, Non PCB Material of case Plastic (UL94V-0) Environmental regulations Comply with RoHS Dimensions 16 101 φ5.5 Item Terminal code Can material Terminal Degree of protection Humidity class Specification H1 Plastic (UL94V-0) Radial thread M8 20 Torque : 4Nm I max (terminal) : 100A IP00 F 25 L(refer to catalog) (ca. 83.5) 45 M8 20 85 26

Standard Value and Case Size Rated Capacitance C N μf Case size Diameter D 1 mm Length L 1 mm Rated ripple voltage U r V Energy Contents W J Series resistance (reference) R S m Rated voltage U N:600Vdc Us: 900V UTT: 900Vdc Thermal resistance (reference) R th K/W Max Max peak I max Î Arms ka Max surge I S ka Self inductance (reference) ESL nh Clearance in air L mm Creepage distance K mm Weight kg Part number 200 85 51 100 36 0.75 6.1 60 3.3 9.9 30 29 33 0.36 E53.N51-204H11/H 280 85 64 100 50 0.84 4.8 60 3.5 10.5 35 29 33 0.45 E53.N64-284H10/H 400 85 76 100 72 1.1 4.1 60 3.3 9.9 40 29 29 0.53 E53.N76-404H11/H Rated voltage U N:700Vdc Us: 1,050V UTT: 1,050Vdc 150 85 51 160 37 0.7 6.1 60 2.9 8.7 30 29 33 0.36 E53.N51-154H11/H 200 85 64 160 49 0.92 4.8 60 2.9 8.7 35 29 33 0.45 E53.N64-204H10/H 300 85 76 160 74 1.2 4.1 60 2.9 8.7 40 29 29 0.53 E53.N76-304H11/H Rated voltage U N:900Vdc Us: 1,350V UTT: 1,350Vdc 120 85 51 200 49 0.84 6.1 60 2.6 7.9 30 29 33 0.36 E53.N51-124H11/H 150 85 64 200 61 1 4.8 60 2.5 7.5 35 29 33 0.45 E53.N64-154H11/H 240 85 76 200 97 1.3 4.1 60 2.6 7.8 40 29 29 0.53 E53.N76-244H11/H Rated voltage U N:1,100Vdc Us: 1,650V UTT: 1,650Vdc 75 85 51 250 45 1.0 6.1 60 2.0 6 30 29 33 0.36 E53.N51-753H11/H 100 85 64 250 61 0.9 4.8 60 2.0 6.2 35 29 33 0.45 E53.N64-104H10/H 150 85 76 250 91 1.5 4.1 75 2.0 6.1 40 29 29 0.53 E53.N76-154H11/H Rated voltage U N:1,300Vdc Us: 1,950V UTT: 1,950Vdc 50 85 51 300 42 1.1 6.1 70 1.6 4.8 30 29 33 0.36 E53.N51-503H11/H 68 85 64 300 57 1.3 4.8 70 1.7 5.1 35 29 33 0.45 E53.N64-683H10/H 100 85 76 300 85 1.5 4.1 60 1.6 4.8 40 29 29 0.53 E53.N76-104H11/H Rated voltage U N:1,500Vdc Us: 2,250V UTT: 2,250Vdc 37.5 85 51 300 42 1.2 6.1 60 1.4 4 30 29 33 0.36 E53.N51-383H11/H 50 85 64 300 56 1.5 4.8 60 1.4 4.2 35 29 33 0.45 E53.N64-503H10/H 75 85 76 300 84 2 4.1 60 1.4 4.2 40 29 29 0.53 E53.N76-753H11/H Rated voltage U N:1,800Vdc Us: 2,700V UTT: 2,700Vdc 30 85 51 400 49 0.73 6.1 60 1.3 3.9 30 29 33 0.36 E53.N51-303H11/H 40 85 64 400 65 1.6 4.8 60 1.3 3.9 35 29 33 0.45 E53.N64-403H10/H 60 85 76 400 97 2.1 4.1 50 1.3 3.9 40 29 29 0.53 E53.N76-603H11/H Rated voltage U N:2,000Vdc Us: 3,000V UTT: 3,000Vdc 13 85 51 400 26 1.6 6.1 55 0.64 1.92 30 29 33 0.36 E53.N51-133H10/H 30 85 64 400 60 1.3 4.8 55 1.1 3.3 35 29 33 0.45 E53.N64-303H10/H 43 85 76 400 86 1.8 4.1 50 1 3 40 29 29 0.53 E53.N76-433H10/H Rated voltage U N:2,200Vdc Us: 3,300V UTT: 3,300Vdc 24.5 85 64 600 59 1.4 4.8 55 0.99 2.97 35 29 33 0.45 E53.N64-253H10/H 35 85 76 600 85 1.9 4.1 50 0.94 2.82 40 29 29 0.53 E53.N76-353H10/H 27

NEW! E55 Series Features High voltage range and ultra low inductance capacitors. E55 series are made in dry technology. For DC application. (DC Cylindrical Metallized Polypropylene Film Capacitors) Specifications Item Specification Category temperature range - 25 ~+ 70 ( + 85 / Includes self temperature rise) Storage temperature - 40 ~+ 85 Rated voltage (U N) 900 ~ 5,000Vdc Terminal (torque) M6 10 (4Nm) / M8 10 (7Nm) Standards IEC 61071 : 2007 Dielectric Polypropylene Dielectric dissipation factor (tanδ 0 ) 2 10-4 Capacitance tolerance ±10% (optional ±5%) Safety devices - Impregnant Solid resin based on vegetable oil, Non PCB Material of case Plastic (UL94V-0) Environmental regulations Comply with RoHS Dimensions Item Terminal code Can material T1 Terminal T2 Degree of protection Humidity class Specification T1 / T2 Plastic (UL94V-0) Axial thread M6 10 Torque : 4Nm I max (terminal) : 60A Axial thread M8 10 Torque : 7Nm I max (terminal) : 100A IP00 G T1 M6 10 L(refer to catalog) L+7 T2 D(refer to catalog) M8 10 L(refer to catalog) L+7 14 20 Standard Value and Case Size Rated Capacitance Case size Diameter Length Rated ripple voltage U r V Energy Contents Series resistance (reference) R S m C N D L W μf mm mm J Rated voltage U N: 900Vdc Us: 1,350V U TT: 1,350Vdc Thermal resistance (reference) R th K/W Max Max peak I max Î Arms ka Max surge I S ka Self inductance (reference) Terminal ESL nh Clearance in air L mm Creepage distance K mm Weight kg Part number 47 55 56 200 19 0.58 8.5 45 0.8 2.3 15 T1 97 97 0.18 E55.H56-473T10/H 250 105 56 280 101 0.35 4.5 100 8.3 24.9 15 T2 141 141 0.64 E55.Q56-254T20/H Rated voltage U N: 1,300Vdc Us: 1,950V U TT: 1,950Vdc 50 75 56 400 42 0.98 6.3 65 2.4 7.2 15 T2 111 111 0.33 E55.M56-503T20/H 90 95 56 400 76 0.55 4.9 80 4.3 12.9 15 T2 131 131 0.52 E55.P56-903T20/H Rated voltage U N: 1,800Vdc Us: 2,700V U TT: 2,700Vdc 22 75 56 600 36 1.5 6.3 40 1.6 4.8 15 T2 111 111 0.33 E55.M56-223T20/H 80 115 56 600 130 0.45 4.1 100 5.2 15.6 15 T2 151 151 0.77 E55.R56-803T20/H Rated voltage U N: 2,000Vdc Us: 3,000V U TT: 3,000Vdc 50 115 56 650 100 0.55 4.1 100 4.1 12.3 15 T2 151 151 0.77 E55.R56-503T20/H Rated voltage U N: 2,400Vdc Us: 3,600V U TT: 3,600Vdc 30 115 56 700 86 0.34 4.1 100 3 10 15 T2 151 151 0.77 E55.R56-303T20/H Rated voltage U N: 2,800Vdc Us: 4,200V U TT: 4,200Vdc 18 105 56 800 71 0.6 4.5 90 4.5 13.5 15 T2 141 141 0.64 E55.Q56-183T20/H Rated voltage U N: 3,200Vdc Us: 4,800V UTT: 4,800Vdc 10 115 56 1,000 51 0.71 4.1 100 2.8 8.4 15 T2 151 151 0.77 E55.R56-103T20/H Rated voltage U N: 5,000Vdc Us: 7,500V U TT: 7,500Vdc 10 115 100 1,500 125 1.3 2.3 100 1.9 1.6 15 T2 195 195 1.37 E55.R10-103T20/H 28

MEMO 29

NEW! E59 Series Features (Custom Designed AC/DC Capacitors in Rectangular Case) Custom designed AC / DC capacitor in rectangular case. An irreversible pressure switch can be used for external monitoring of the internal pressure. (optional) Specifications Item Specification Category temperature range - 40 ~+ 70 ( + 85 / Includes self temperature rise) Storage temperature - 50 ~+ 85 Rated voltage (U N) 500 ~ 25,000V DC / 250 ~ 10,000V AC Standards IEC 61071 : 2007 Dielectric Polypropylene Dielectric dissipation factor (tanδ 0 ) 2 10-4 Capacitance tolerance ±10% (optional ±5%) Safety devices Optional pressure switch for external monitoring of the internal pressure (hermetical construction only) Impregnant Solid polyurethane Material of case Aluminum Environmental regulations Comply with RoHS Standard Value and Case Size Case Dimension Maximum capacitance per case (Milifarad) L W H ( mm ) 500V 900V 1100V 1300V 1700V 2000V 2400V 2700V 3000V 3500V 4000V 5000V 340 125 200 6.00 3.40 2.30 1.60 0.92 0.72 0.43 0.34 0.28 0.20 0.16 0.09 340 125 280 10.50 5.90 3.90 2.70 1.60 1.20 0.75 0.58 0.49 0.36 0.28 0.15 340 125 550 22.00 12.00 8.00 5.60 3.33 2.60 1.50 1.20 1.00 0.74 0.58 0.30 340 125 820 40.00 22.50 15.00 10.00 5.50 4.30 2.60 2.00 1.70 1.20 1.00 0.52 340 140 200 ー 4.20 2.90 2.10 1.10 0.89 0.65 0.51 0.42 0.30 0.25 0.13 340 140 280 ー 7.00 5.00 3.50 1.90 1.50 0.93 0.73 0.60 0.45 0.35 0.20 340 140 360 ー 8.20 5.80 4.10 2.20 1.75 1.10 0.85 0.71 0.52 0.40 0.22 340 140 450 ー 11.80 8.20 6.00 3.20 2.50 1.55 1.20 1.00 0.75 0.60 0.32 340 140 520 ー 13.50 9.50 6.80 3.70 2.90 1.80 1.40 1.18 0.87 0.68 0.37 340 140 600 ー 17.25 12.00 8.60 4.70 3.70 2.25 1.80 1.50 1.10 0.86 0.46 340 140 810 ー 24.50 17.00 12.00 6.70 5.20 3.20 2.55 2.10 1.60 1.20 0.66 340 175 360 ー 10.50 7.30 5.20 2.85 2.20 1.40 1.10 0.90 0.68 0.53 0.29 340 175 400 ー 13.30 9.30 6.60 3.60 2.85 1.75 1.40 1.15 0.86 0.68 0.37 340 175 450 ー 15.50 11.00 7.70 4.20 3.30 2.05 1.60 1.35 1.00 0.78 0.43 340 175 550 ー 20.00 14.00 10.00 5.50 4.35 2.70 2.10 1.76 1.30 1.00 0.56 340 175 600 ー 22.00 15.00 10.80 5.90 4.60 2.85 2.25 1.87 1.40 1.10 0.60 340 175 680 ー 25.00 17.50 12.30 6.60 5.20 3.20 2.50 2.08 1.55 1.20 0.67 340 175 700 ー 26.50 18.50 13.20 7.20 5.70 3.50 2.80 2.30 1.70 1.35 0.73 340 175 760 ー 28.00 20.00 14.00 7.60 6.00 3.60 2.90 2.35 1.75 1.40 0.75 340 175 850 ー 32.00 24.00 15.80 8.65 6.80 4.20 3.30 2.70 2.10 1.60 0.88 320 175 370 ー 20.50 14.20 10.00 5.50 4.35 2.70 2.10 1.80 1.30 1.00 0.56 520 175 450 ー 23.00 16.00 11.50 6.30 5.00 3.00 2.40 2.00 1.50 1.20 0.66 520 175 630 ー 35.00 25.00 17.50 9.60 7.50 4.70 3.70 3.00 2.30 1.80 1.00 520 175 880 ー 53.00 36.00 26.00 14.30 11.20 7.00 5.50 4.50 3.40 2.70 1.45 Other values and designs on request. 30

Terminals for E59 series M12 65φ M16 φ46 M12 φ58 M12 30 30 43 φ46 M8 12 14.5 20 50 40 30 30 40 70 F1 M12 30 terminal F4 M12 30 terminal F5 M12 30 terminal F6 M16 30 terminal φ58 φ28 M8 16 φ58 φ28 M8 16 65φ φ32 M12 30 42 40 22 F4 im8 12 terminal F4 im8 16 terminal F5 im8 16 terminal F6 im12 30 terminal Irreversible Pressure Switch Type Mechanical pressure switch with a diaphragm of EPDM or stainless steel, and a change-over contact for converting pressure into an electrical switching signal, RoHS-compliant. Contacts Cable-plugs 6.3mm x 0.8mm; we recommend using insulated cable plugs if operating the switch without protective cap. Functions The pressure switch just provides a signal for information about the rising pressure inside the capacitor. The pressure switch does NOT have the following functions. provide detailed data about the exact pressure inside the capacitor interrupt the path and disconnect the capacitor from its supply Table. The switch can be used for the following signal s : Type of load Type of Maximum voltage Maximum Inductive AC 250V rms 2A DC 24V 1A Ohmic AC 250V rms 4A DC 24V 2A Our pressure switch is designed as an SPDT (Single Pole, Double Throw) device. It can therefore be used for the following options. Fig. Pressure switch Option Advantage Disadvantage Opening switch Monitoring of the conductor power losses by permanent risk of electrochemical corrosion Closing switch Change-over switch No, no power losses No electrochemical corrosion Additional verification of the switching contact, minimization of false alarms No conductor monitoring, risk of monitoring failure going unnoticed Risk of incorrect cable connection during assembly process 2 3 1 Fig. Circuitry of pressure switch Protective cap (optional, IP54) A protection cap made of NBT can be ordered as an accessory. The cap can be used for additional protection of the pressure switch from environmental impact, for insulation and protection from accidental contact. Fig. Protective cap 31

NEW! E62(AC) Series Features (AC Cylindrical Metallized Polypropylene Film Capacitos) Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure disconnector ensure safe operation and controlled disconnection in the event of overload or failure at the end of operating life. Specifications Item Specification Category temperature range - 40 ~+ 70 ( + 85 / Includes self temperature rise) Storage temperature - 40 ~+ 85 Rated voltage (U N) 420 ~ 4,000Vac Stud bolt (torque) M12 16 / 18 (15 ±1Nm) Standards IEC 61071 : 2007 Dielectric Polypropylene Dielectric dissipation factor (tanδ 0 ) 2 10-4 Capacitance tolerance ±10% (optional ±5%) Safety devices Overpressure disconnector Impregnant Solid resin based on vegetable oil, Non PCB Material of case Plastic (UL94V-0) Environmental regulations Comply with RoHS Standard Value and Case Size Rated Capacitance C N μf Case size Diameter Length D mm L mm Rated DC voltage U R (DC) Vdc Max (rms) I max Arms Max peak Î ka Max surge I S ka Rated energy contents W J Series resistance (reference) R S m Self inductance (reference) ESL nh Thermal resistance (reference) R th K/W Terminal Weight kg Part number Rated AC voltage U N(AC):420Vac U rms:300v U S:1,050V Test voltage(t-t)u TT:1,050Vdc/2s Test voltage(t-c)u TC:3,000Vac/2s 42.5 60 80 700 20 0.8 2.5 10 2.3 90 9.3 Z1 0.27 E62.K80-433Z10/H 60 50 85 700 32 0.7 2.1 15 3.3 100 10.5 G1 0.18 E62.G85-603G10/H 75 60 105 700 40 0.8 2.5 18 2.1 110 7.1 C68 0.31 E62.K10-753C68/H 95 65 105 700 30 1.0 3.0 23 2.3 110 6.5 Z1 0.40 E62.L10-953Z10/H 100 65 95 700 40 1.15 3.45 25 3.1 100 7.2 G1 0.33 E62.L95-104G10/H 120 75 105 700 50 1.4 4.2 29 1.0 140 5.7 C6 0.5 E62.M10-124C60/H 130 65 109 700 40 1.2 3.6 32 3.4 110 6.3 G1 0.4 E62.L10-134G10/H 130 75 105 700 30 1.4 4.0 32 2.4 110 5.7 Z1 0.5 E62.M10-134Z10/H 150 65 135 700 35 1.2 3.6 37 4.4 110 5.1 G1 0.5 E62.L13-154G10/H 167 85 112 700 56 1.8 5.0 41 1.2 110 4.7 S2 0.65 E62.N11-174S20/H 170 85 105 700 50 2.0 6.0 42 0.82 140 5 C6 0.6 E62.N10-174C60/H 200 65 145 700 30 1.2 3.6 49 4.4 140 4.7 G1 0.5 E62.L14-204G10/H 217 95 112 700 56 2.4 7.0 53 1.1 110 4.2 S2 0.85 E62.P11-224S20/H 220 95 105 700 50 2.5 7.5 54 1.3 140 4.5 C6 0.8 E62.P10-224C60/H 250 85 176 700 80 3.0 10.0 61 1.2 160 3 C6 1.2 E62.N17-254C60/H 340 85 169 700 56 1.8 3.0 83 1.8 110 3.1 S2 1.0 E62.N16-344S20/H 400 85 245 700 80 4.5 13.5 98 0.68 160 2.1 C6 1.5 E62.N24-404C60/H 434 95 179 700 56 5.0 14.0 106 1.0 120 2.6 S2 1.3 E62.P17-434S20/H 470 95 176 700 50 5.3 15.9 115 0.53 160 2.7 C6 1.3 E62.P17-474C60/H 500 100 176 700 80 5.7 17.1 123 0.57 160 2.5 C6 1.5 E62.Q17-504C60/H 540 95 245 700 80 6.0 18.0 132 0.9 170 1.9 C6 2.2 E62.P24-544C60/H 2,000 136 320 700 100 15 20 490 0.6 190 1 C6 4.9 E62.S32-205C60/H Rated AC voltage U N(AC):500Vac U rms:360v U S:1,260V Test voltage(t-t)u TT:1,260Vdc/2s Test voltage(t-c)u TC:3,000Vac/2s 30 60 80 840 20 0.7 2.2 11 2.4 90 9.3 Z1 0.27 E62.K80-303Z10/H 40 50 85 840 30 0.6 1.7 14 3.6 100 10.5 G1 0.18 E62.G85-403G10/H 50 55 85 840 25 0.7 2.1 18 4.4 110 9.5 G1 0.21 E62.H85-503G10/H 55 60 105 840 40 0.7 2.2 19 2.2 110 7.1 C68 0.31 E62.K10-553C68/H 70 65 105 840 30 0.9 2.8 25 2.4 110 6.5 Z1 0.40 E62.L10-703Z10/H 75 65 95 840 40 1.0 3.0 26 2.3 100 7.2 G1 0.33 E62.L95-753G10/H 100 65 135 840 40 0.9 2.7 35 4.3 120 5.1 G1 0.5 E62.L13-104G10/H 120 75 120 840 39 1.3 4.0 42 2.6 110 5.0 Z1 0.6 E62.M12-124Z10/H 150 85 124 840 56 1.6 5.0 53 1.4 110 4.2 S2 0.75 E62.N12-154S20/H 250 85 169 840 56 1.6 5.0 88 1.9 110 3.1 S2 1.0 E62.N16-254S20/H 300 95 176 840 80 4.1 12.3 106 1.1 160 2.7 C6 1.3 E62.P17-304C60/H 320 95 179 840 56 4.0 13 113 1.0 120 2.6 S2 1.3 E62.P17-324S20/H 620 116 245 840 100 9.0 15 219 0.58 160 1.6 C6 2.7 E62.R24-624C60/H 750 116 245 840 100 10 20 265 0.57 170 1.6 C6 2.7 E62.R24-754C60/H 1,000 136 245 840 100 14 20 353 0.56 170 1.3 C6 3.7 E62.S24-105C60/H 1,500 136 320 840 100 15 20 529 0.5 190 1 C6 4.9 E62.S32-155C60/H 32

Standard Value and Case Size Rated Capacitance C N μf Diameter D mm Case size Length L mm Rated DC voltage U R (DC) Vdc Max (rms) I max Arms Max peak Î ka Max surge I S ka Rated energy contents W J Series resistance (reference) R S m Self inductance (reference) ESL nh Thermal resistance (reference) R th K/W Terminal symbol Weight kg Part number Rated AC voltage U R(AC):640Vac U rms:450v U S:1,500V Test voltage(t-t)u TT:1,500Vdc/2s Test voltage(t-c)u TC:3,000Vac/2s 15 50 62 1,000 25 0.24 0.7 8 2.9 100 14.4 G1 0.14 E62.G62-153G10/H 23 60 80 1,000 20 0.7 2.0 12 2.5 90 9.3 Z1 0.27 E62.K80-233Z10/H 30 50 85 1,000 33 0.5 1.4 15 3.9 100 10.5 G1 0.18 E62.G85-303G10/H 41 60 105 1,000 40 0.6 1.9 21 2.4 110 7.1 C68 0.31 E62.K10-413C68/H 50 65 95 1,000 40 0.8 2.4 25 3.4 100 7.2 G1 0.33 E62.L95-503G10/H 52 65 105 1,000 30 0.8 2.4 26 2.5 110 6.5 Z1 0.4 E62.L10-523Z10/H 68 65 109 1,000 30 0.9 2.7 34 3.7 100 6.3 G1 0.4 E62.L10-683G10/H 100 85 120 1,000 80 3.0 9.0 50 0.53 100 4.4 C6 0.9 E62.N12-104C60/H 140 85 164 1,000 100 4.0 12 70 0.81 160 3.2 C6 1.0 E62.N16-144C60/H 145 75 164 1,000 39 1.1 3.0 73 3.3 110 3.6 Z1 0.75 E62.M16-154Z10/H 155 85 149 1,000 56 1.4 4.0 78 1.8 110 3.5 S2 0.9 E62.N14-164S20/H 200 95 176 1,000 80 3.5 10.5 100 0.7 160 2.7 C6 1.3 E62.P17-204C60/H 220 95 159 1,000 56 1.8 5.0 110 1.7 130 2.9 S2 1.2 E62.P15-224S20/H 250 100 176 1,000 80 4.0 12.0 125 0.63 160 2.5 C6 1.5 E62.Q17-254C60/H 350 116 176 1,000 80 5.6 16.8 175 0.57 160 2.2 C6 2.0 E62.R17-354C60/H 500 116 245 1,000 100 7.8 20.0 250 0.6 170 1.6 C6 2.7 E62.R24-504C60/H 750 116 320 1,000 100 12.0 20.0 375 0.64 190 1.2 C6 3.5 E62.R32-754C60/H 800 136 245 1,000 100 12.8 20.0 400 0.63 170 1.3 C6 3.7 E62.S24-804C60/H 1,000 136 320 1,000 100 15.6 20.0 500 0.62 190 1.0 C6 4.9 E62.S32-105C60/H Rated AC voltage U R(AC):640Vac U rms:450v U S:1,500V Test voltage(t-t)u TT:1,500Vdc/2s Test voltage(t-c)u TC:3,000Vac/2s 15 50 62 1,000 25 0.24 0.7 8 2.9 100 14.4 G1 0.14 E62.G62-153G10/H 23 60 80 1,000 20 0.7 2.0 12 2.5 90 9.3 Z1 0.27 E62.K80-233Z10/H 30 50 85 1,000 33 0.5 1.4 15 3.9 100 10.5 G1 0.18 E62.G85-303G10/H 41 60 105 1,000 40 0.6 1.9 21 2.4 110 7.1 C68 0.31 E62.K10-413C68/H 50 65 95 1,000 40 0.8 2.4 25 3.4 100 7.2 G1 0.33 E62.L95-503G10/H 52 65 105 1,000 30 0.8 2.4 26 2.5 110 6.5 Z1 0.4 E62.L10-523Z10/H 68 65 109 1,000 30 0.9 2.7 34 3.7 100 6.3 G1 0.4 E62.L10-683G10/H 100 85 120 1,000 80 3.0 9.0 50 0.53 100 4.4 C6 0.9 E62.N12-104C60/H 140 85 164 1,000 100 4.0 12 70 0.81 160 3.2 C6 1.0 E62.N16-144C60/H 145 75 164 1,000 39 1.1 3.0 73 3.3 110 3.6 Z1 0.75 E62.M16-154Z10/H 155 85 149 1,000 56 1.4 4.0 78 1.8 110 3.5 S2 0.9 E62.N14-164S20/H 200 95 176 1,000 80 3.5 10.5 100 0.7 160 2.7 C6 1.3 E62.P17-204C60/H 220 95 159 1,000 56 1.8 5.0 110 1.7 130 2.9 S2 1.2 E62.P15-224S20/H 250 100 176 1,000 80 4.0 12.0 125 0.63 160 2.5 C6 1.5 E62.Q17-254C60/H 350 116 176 1,000 80 5.6 16.8 175 0.57 160 2.2 C6 2.0 E62.R17-354C60/H 500 116 245 1,000 100 7.8 20.0 250 0.6 170 1.6 C6 2.7 E62.R24-504C60/H 750 116 320 1,000 100 12.0 20.0 375 0.64 190 1.2 C6 3.5 E62.R32-754C60/H 800 136 245 1,000 100 12.8 20.0 400 0.63 170 1.3 C6 3.7 E62.S24-804C60/H 1,000 136 320 1,000 100 15.6 20.0 500 0.62 190 1.0 C6 4.9 E62.S32-105C60/H Rated AC voltage U N(AC):680Vac U rms:480v U S:1,680V Test voltage(t-t)u TT:1,680Vdc/2s Test voltage(t-c)u TC:3,000Vac/2s 17.5 60 80 1,120 20 0.6 1.7 11 2.6 90 9.3 Z1 0.27 E62.K80-183Z10/H 31 60 105 1,120 40 0.6 1.7 19 2.6 110 7.1 C68 0.31 E62.K10-313C68/H 39 65 105 1,120 30 0.7 2.1 24 2.7 110 6.5 Z1 0.40 E62.L10-393Z10/H 66 75 120 1,120 39 1.0 2.9 41 2.6 110 5.0 Z1 0.60 E62.M12-663Z10/H 86 85 124 1,120 56 1.3 4.0 54 1.6 110 4,2 S2 0.75 E62.N12-863S20/H 100 95 120 1,120 80 3.0 10.0 63 1.1 150 3.9 C6 0.9 E62.P12-104C60/H 150 116 124 1,120 80 5.0 14.0 94 0.95 150 3.2 C6 1.3 E62.R12-154C60/H 152 95 149 1,120 56 1.6 5.0 95 1.7 110 3.1 S2 1.1 E62.P14-154S20/H 200 100 176 1,120 80 3.7 11.1 125 0.66 160 2.5 C6 1.5 E62.Q17-204C60/H 280 116 176 1,120 80 5.1 15.3 176 0.6 160 2.2 C6 2.0 E62.R17-284C60/H 400 116 245 1,120 100 7.3 20.0 251 0.6 170 1.6 C6 2.7 E62.R24-404C60/H 600 136 245 1,120 100 10.7 20.0 376 0.56 170 1.3 C6 3.7 E62.S24-604C60/H 800 136 320 1,120 100 14.8 20.0 502 0.63 190 1.0 C6 4.9 E62.S32-804C60/H Rated AC voltage U N(AC):750Vac U rms:530v U S:1,900V Test voltage(t-t)u TT:1,890Vdc/2s Test voltage(t-c)u TC:3,000Vac/2s 10 50 62 1,260 20 0.4 1.2 8 3.1 110 14.4 G1 0.14 E62.G62-103G10/H 13 60 80 1,260 20 0.5 1.4 10 2.8 90 9.3 Z1 0.27 E62.K80-133Z10/H 20 50 85 1,260 27 0.4 1.2 16 4.2 100 10.5 G1 0.18 E62.G85-203G10/H 24 60 105 1,260 40 0.5 1.4 19 2.9 110 7.1 C68 0.31 E62.K10-243C68/H 30 65 105 1,260 30 0.6 1.8 24 3.2 110 6.5 Z1 0.4 E62.L10-303Z10/H 33 65 95 1,260 37 0.7 2.0 26 3.6 100 7.2 G1 0.33 E62.L95-333G10/H 40 65 109 1,260 30 0.7 2.0 32 5.6 120 6.3 G1 0.4 E62.L10-403G10/H 51 75 120 1,260 39 0.8 2.5 40 3.1 110 5.0 Z1 0.6 E62.M12-513Z10/H 60 65 145 1,260 35 0.7 2.0 48 6.2 140 4.7 G1 0.5 E62.L14-603G10/H 65 85 124 1,260 56 1.1 3.0 52 1.8 110 4.2 S2 0.75 E62.N12-653S20/H 116 95 149 1,260 56 1.4 4.0 92 1.8 110 3.1 S2 1.1 E62.P14-124S20/H 150 100 176 1,260 80 3.1 9.3 119 0.7 160 2.5 C6 1.5 E62.Q17-154C60/H 220 116 176 1,260 80 4.5 13.5 175 0.61 160 2.2 C6 2 E62.R17-224C60/H 330 116 245 1,260 100 6.8 20.0 262 0.61 170 1.6 C6 2.7 E62.R24-334C60/H 350 116 245 1,260 100 6.8 20.0 278 0.59 160 1.6 C6 2.7 E62.R24-334C60/H 500 136 245 1,260 100 10.1 20.0 397 0.56 170 1.3 C6 3.7 E62.S24-504C60/H 600 136 320 1,260 100 12.4 20.0 476 0.64 190 1.0 C6 4.9 E62.S32-604C60/H 33

Dimensions (E62(AC) series) C6 / C68 terminal CR terminal M8 D+4 Solder(0~2.5mm) D+4.5 Solder(0~2.5mm) 16 L(Refer to catalog) L(Refer to catalog) L 1 22.5 L 1 25 24 M12 D(Refer to catalog) M12 D(Refer to catalog) 16 35 41 Table. Common Specification Item Terminal code Can material Stud bolt Lid Terminal C6 C68 Degree of protection Humidity class Specification C6 / C68 Aluminum M12 Aluminum M10 bolt terminal, Plastic bushing Torque : 9Nm I max (terminal) : 100A M8 bolt terminal, Plastic bushing Torque : 4Nm I max (terminal) : 30A IP00 C Table. Common Specification Item Specification Terminal code CR Can material Aluminum Stud bolt M12 Lid Aluminum M10 bolt terminal, Celamic bushing Terminal Torque : 9Nm I max (terminal) : 100A Degree of protection IP00 Humidity class C Table. Dimensions Unit : mm Table. Dimensions Unit : mm D L Insulation distance in Air Creepage 60 41 19 23 65 41 19 23 75 41 15 25 85 41 15 25 95 41 15 25 100 41 15 25 116 37 15 25 136 36 15 25 D L Insulation distance in Air Creepage 75 56 17 54 85 56 17 54 95 56 17 54 100 56 17 54 116 54 17 54 136 51 17 54 35

Dimensions (E62(AC) series) G1 terminal 12 Solder(0~2.5mm) 14.5 25 L(Refer to catalog) Table. Common Specification Item Terminal code Can material Stud bolt Lid Terminal Degree of protection Humidity class Specification G1 Aluminum M12 Plastic, Rubber M6 bolt terminal, Plastic bushing Torque : 2Nm I max (terminal) : 40A IP00 F M12 D(Refer to catalog) 16 Table. Dimensions D Insulation distance in Air Unit : mm Creepage 60 10 15 65 10 16 75 10 21 22 36

Dimensions (E62(AC) series) Z1/ S2 terminal D+4.5 16 h t t POWER ELECTRONICS USE PLASTIC FILM CAPACITORS Z1 L(Refer to catalog) S2 M12 Z1 D(Refer to catalog) b Table. Common Specification Item Terminal code Can material Stud bolt Lid Terminal Z1 S2 Degree of protection Humidity class Specification Z1 / S2 Aluminum M12 Aluminum Max wire size : max 10mm 2 Torque : 2.7Nm I max (terminal) : 39A Clearance in air : 14mm Creepage distance : 15mm Max wire size : max 16mm 2 Torque : 2.7Nm I max (terminal) : 56A Clearance in air : 16mm Creepage distance : 16mm IP00 C S2 b Table. Dimensions Item Terminal Z1 S2 h 22 18 b 41 47 t 43.5 53 Unit : mm 37

NEW! E62-3HF(AC) Series Features (Three Phase Type Cylindrical Metallized Polypropylene Film Capacitors) The three capacitor elements are connected in delta internally. Designed especially for heavy duty operation in extreme or sophisticated operating conditions. The integrated overpressure disconnector ensure safe operation and controlled disconnection in the event of overload or failure at the end of operating life. Specifications Item Specification Category temperature range - 40 ~+ 70 ( + 85 / Includes self temperature rise) Storage temperature - 40 ~+ 85 Rated voltage (U N) 640 ~ 1,200Vac Stud bolt (torque) M12 16 / 18 (15 ±1Nm) Standards IEC 61071 : 2007 Dielectric Polypropylene Dielectric dissipation factor (tanδ 0 ) 2 10-4 Capacitance tolerance ±5% Safety devices Overpressure disconnector Impregnant Castor oil, Non PCB Material of case Aluminum Environmental regulations Comply with RoHS Standard Value and Case Size Rated Capacitance C N μf Diameter D mm Case size Length L mm Max (rms) I max Arms Max peak Î ka Max surge I S ka Rated energy contents W J Series resistance (reference) R S m Self inductance (reference) ESL nh Thermal resistance (reference) R th K/W Terminal Weight kg Part number Rated AC voltage U N(AC):640Vac U rms:450v U S:1,350V Test voltage(t-t)u TT:1,060Vdc/2s Test voltage(t-c)u TC:3,600Vac/2s 3 33 75 164 3 39 0.9 2.7 20.3 3 0.9 110 4.7 Z3 0.8 E62.M16-333Z30/H 3 40 75 164 3 39 1.1 3.3 24.6 3 0.9 110 4.7 Z3 0.8 E62.M16-403Z30/H 3 46 85 164 3 56 1.3 3.9 28.3 3 0.7 120 4.1 S4 1.0 E62.N16-463S40/H 3 51 85 164 3 56 1.4 4.2 31.3 3 0.7 120 4.1 S4 1.0 E62.N16-513S40/H 3 68 95 164 3 56 1.9 5.7 41.8 3 0.6 120 3.5 S4 1.5 E62.P16-683S40/H 3 80 95 196 3 56 1.8 5.4 49.2 3 0.7 130 3.1 S4 1.5 E62.P19-803S40/H 3 100 116 196 3 56 2.5 7.5 61.5 3 0.6 130 2.5 S4 2.2 E62.R19-104S40/H 3 140 116 230 3 56 2.5 7.5 86.1 3 0.7 120 2.4 S4 2.6 E62.R23-144S40/H Rated AC voltage U N(AC):750Vac U rms:530v U S:1,600V Test voltage(t-t)u TT:1,250Vdc/2s Test voltage(t-c)u TC:3,600Vac/2s 3 16 65 164 3 39 0.6 1.8 13.5 3 1.1 100 5.4 Z3 0.6 E62.L16-163Z30/H 3 23 75 164 3 39 0.85 2.5 19.4 3 1.0 110 4.7 Z3 0.8 E62.M16-233Z30/H 3 30 85 164 3 56 1.1 3.3 25.3 3 0.7 120 4.1 S4 1.0 E62.N16-303S40/H 3 38.4 95 164 3 56 1.4 4.2 32.4 3 0.6 125 3.7 S4 1.2 E62.P16-383S40/H 3 48 95 196 3 56 1.4 4.2 40.4 3 0.7 130 3.1 S4 1.5 E62.P19-483S40/H 3 75 116 196 3 56 2.1 6.3 63.3 3 0.6 130 2.5 S4 2.2 E62.R19-753S40/H 3 100 116 230 3 56 2.1 6.3 84.4 3 0.7 120 2.4 S4 2.6 E62.R23-104S40/H Rated AC voltage U N(AC):850Vac U rms:600v U S:1,820V Test voltage(t-t)u TT:1,420Vdc/2s Test voltage(t-c)u TC:4,800Vac/2s 3 9.0 60 164 3 39 0.8 2.4 9.8 3 1.0 100 5.8 Z3 0.5 E62.K16-902Z30/H 3 11 65 164 3 39 1.0 3.0 11.9 3 0.9 100 5.4 Z3 0.6 E62.L16-113Z30/H 3 12 65 164 3 39 1.1 3.3 13.0 3 0.9 100 5.4 Z3 0.6 E62.L16-123Z30/H 3 14 65 196 3 39 1.0 3.0 15.2 3 1.0 120 4.5 Z3 0.7 E62.L19-143Z30/H 3 19 75 196 3 39 1.3 3.9 20.6 3 0.9 125 3.9 Z3 0.9 E62.M19-193Z30/H 3 25 85 196 3 56 1.7 5.2 27.1 3 0.7 130 3.4 S4 1.2 E62.N19-253S40/H 3 30 95 196 3 56 2.0 6.0 32.5 3 0.6 130 3.1 S4 1.5 E62.P19-303S40/H 3 37.5 100 196 3 56 2.4 7.2 40.6 3 0.55 130 2.9 S4 1.6 E62.Q19-373S40/H 3 50 116 196 3 56 3.4 10.2 54.2 3 0.5 130 2.5 S4 2.2 E62.R19-503S40/H 3 50 100 230 3 56 2.5 7.5 54.2 3 0.6 130 2.5 S4 2 E62.Q23-503S40/H 3 72.5 116 230 3 56 3.6 10.8 78.6 3 0.65 120 2.5 S4 2.6 E62.R23-723S40/H 38

Standard Value and Case Size Rated Capacitance C N μf Diameter D mm Case size Length L mm Max (rms) I max Arms Max peak Î ka Max surge I S ka Rated energy contents W J Series resistance (reference) R S m Self inductance (reference) ESL nh Thermal resistance (reference) R th K/W Terminal Weight kg Part number Rated AC voltage U N(AC):1,080Vac U rms:760v U S:2,300V Test voltage(t-t)u TT:1,800Vdc/2s Test voltage(t-c)u TC:4,800Vac/2s 3 11 75 164 3 39 1.2 3.6 19.2 3 1.0 110 4.7 Z3 0.8 E62.M16-113Z30/H 3 18.4 95 164 3 56 2.0 6.0 32.4 3 0.6 125 3.7 S4 1.2 E62.P16-183S40/H 3 22 100 164 3 56 2.5 7.5 38.5 3 0.6 120 3.5 S4 1.5 E62.Q16-223S40/H 3 27.6 116 196 3 56 2.4 7.2 48.3 3 0.5 130 2.5 S4 2.2 E62.R19-273S40/H 3 33.4 100 230 3 56 2.1 6.3 63.6 3 0.6 130 2.5 S4 2.2 E62.Q23-333S40/H 3 49 116 230 3 56 3.2 9.6 85.7 3 0.55 120 2.1 S4 2.2 E62.R23-493S40/H 3 55.7 136 196 3 56 5.0 15.0 97.5 3 0.4 130 2.1 S4 2.2 E62.S19-563S40/H Rated AC voltage U N(AC):1,130Vac U rms:800v U S:2,430V Test voltage(t-t)u TT:1,890Vdc/2s Test voltage(t-c)u TC:4,800Vac/2s 3 24.9 95 230 3 56 1.7 5.1 47.7 3 0.6 130 2.6 S4 1.8 E62.P23-253S40/H 3 33.2 116 196 3 56 2.9 8.7 63.6 3 0.6 130 2.5 S4 2.2 E62.R19-333S40/H 3 41.4 116 230 3 56 2.7 8.1 79.3 3 0.7 120 2.4 S4 2.6 E62.R23-413S40/H 3 46 116 230 3 56 2.9 8.7 88.1 3 0.65 120 2.4 S4 2.6 E62.R23-463S40/H Rated AC voltage U N(AC):1,200Vac U rms:850v U S:2,580V Test voltage(t-t)u TT:2,010Vdc/2s Test voltage(t-c)u TC:4,800Vac/2s 3 8.0 75 164 3 39 1.0 3.0 17.3 3 1.0 110 4.7 Z3 0.8 E62.M16-802Z30/H 3 25 116 196 3 56 2.4 7.2 54.0 3 0.5 130 2.5 S4 2.2 E62.R19-253S40/H 3 37.5 116 230 3 56 2.6 7.8 81.0 3 0.7 120 2.4 S4 2.6 E62.R23-373S40/H 3 41.5 116 245 3 56 2.7 5.1 89.6 3 0.55 120 2.6 S4 2.7 E62.R24-413S40/H 39

Dimensions (E62-3HF(AC) series) Z3 / S4 terminal Z3:D+4 / S4:D+4.5 16 h t t POWER ELECTRONICS USE PLASTIC FILM CAPACITORS Z3 L(Refer to catalog) S4 M12 D(Refer to catalog) Z3 b Table. Common Specification Item Terminal code Can material Stud bolt Lid Terminal Z3 S4 Degree of protection Humidity class Specification Z3 / S4 Aluminum M12 Aluminum Max wire size : max 10mm 2 Torque : 2.7Nm I max (terminal) : 39A Clearance in air : 10mm Creepage distance : 10mm Max wire size : max 16mm 2 Torque : 2.7Nm I max (terminal) : 56A Clearance in air : 11mm Creepage distance : 11mm IP00 C S4 Table. Dimensions Unit : mm b Item Terminal Z1 S2 h 22 18 b 41 47 t 43.5 53 40

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS Precautions in using Plastic Film Capacitors other than Power electronics use 1. When DC-rated Types Are Used in AC Circuits The plastic film capacitor voltage ratings are usually expressed in volts DC (V.DC). (1) Use in AC circuits When DC-rated types are used in AC-rated circuits, unexpected heat generation or other contingencies can take place. Therefore, ensure that the voltages listed in the following conversion table (Table 1) are not exceeded. Since the AC rating may vary with the product type, contact your local Hitachi AIC agent for details. Table 1 Equivalent AC rating for DC-rated products Rated DC voltage Maximum permitted operating AC voltage (50 or 60Hz) MTBS, MTB MDDSA MDD-P MTB-P 100V.DC 63V.AC 40V.AC 250V.DC 150V.AC 100V.AC 150V.AC 400V.DC 200V.AC 150V.AC 200V.AC 630V.DC 250V.AC 200V.AC 250V.AC (2) Use at high frequency If the capacitors are used at a high frequency, they can deteriorate or become defective due to its spontaneous heat generation. To avoid such problems, be sure that the capacitors are used within the ranges defined in Figs. 1, 2, and 3. Since the permitted limits vary with the product type, contact your local Hitachi AIC agent for details. 10.0 5.0 630V 400V 250V 10.0 5.0 1.0 0.5 f =100kHz Current (Arms) 2.0 1.0 0.5 Current (Arms) 2.0 1.0 0.5 630V 400V 250V Current (Arms) 0.2 0.1 0.05 f =10kHz 0.2 f =10kHz 0.2 f =10kHz 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 Capacitance (μf) Fig. 1 Metallized polyester capacitors ( MDDSA, MTB types) 0.05 0.1 0.2 0.5 1.0 2.0 5.0 Capacitance (μf) Fig. 2 Metallized polypropylene capacitors (MDD-P and MTB-P types) 0.01 0.02 0.05 0.1 0.2 0.5 Capacitance (μf) Fig. 3 Metallized PPS film capacitors (MDD-HF, MML-E types) 2. Operating Temperature The operating temperature varies with the type of the plastic film used as the capacitor dielectric. (1) Relationship between operating temperature and voltage rating tolerance The operating temperature and maximum voltage rating vary with the capcitor dielectric film type. Be sure that the operating temperature does not exceed the value determined by adding the ambient temperature value to the spontaneous temperature rise value which is explained in paragraph 2 below. For the resulting voltage derating factor, see Figs. 4, 5, or 6. Maximum voltage rating (%) 100 80 60 40 20 Maximum voltage rating (%) 100 80 60 40 20 Maximum voltage rating (%) 100 80 60 40 20 0 0 0-40 -20 0 20 40 60 80 100 120-40 -20 0 20 40 60 80 100 120-40 -20 0 20 40 60 80 100 120 Operating temperature ( ) Operating temperature ( ) Operating temperature ( ) Fig. 4 Metallized polyester capacitors temperature derating diagram (MDDSA types) Fig. 5 Metallized polypropylene capacitors temperature derating diagram (MDD-P and MTB-P types) Fig. 6 Metallized PPS film capacitors temperature derating diagram (MDD-HF, MML-E types) 41

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS (2) Spontaneous temperature rise If capacitor spontaneous heat generation is significant at a high frequency, the capacitors can deteriorate or burn out. Therefore, the capacitors must be used in such a manner that the spontaneous temperature rise in a no-airflow environment (at an ambient temperature of 40 ) does not exceed the permitted limit listed in Table 2. Table 2 Maximum permitted spontaneous temperature rises Capacitor type Designation Spontaneous temperature rise Metallized polyester capacitor MPET 10 Metallized polypropylene capacitor MPP 5 Metallized polyphenylene sulfide film capacitor MPPS 10 3. Soldering lead-attached capacitors (MDDSA, MTB, MDD-P, and MTB-P types) When soldering capacitor leads to a printed circuit board or the like, use care not to exceed the temperature limits shown in Figs. 7 and 8, because long-time heating can incur property deterioration or short-circuiting. 350 350 Solder temperature ( ) 300 250 200 Solder bath temperature ( ) 300 250 200 <Conditions> PCB : Double-sides through-hole type t = 0.8 or larger Pre-heat : 110, 1minuts Polypropylene-based : Leaving on air space between the capacitor and the PCB is recommended. 0 1 2 3 4 5 6 7 8 Soldering time (sec) Fig. 7 Temperature limits for soldering by solder iron 0 1 2 3 4 5 6 7 8 Dipping time (sec) Fig. 8 Temperature limits for solder dip 4. Soldering for SMD Metallized Film Capacitors (Lead Free Products :Complies with RoHS) Reflow soldering is generally used for SMD Capacitors on printed boards. However, the soldering conditions vary with the circuit board material, packaging density, heat source, and other relevant factors used. 4.1 MPPS Capacitors MML-E type, MMX-EC type (1) In the case of Reflow MML-E type Perform reflow soldering within the following conditions. Measuring side : Substrate surface snd Capasitor surface Number of Soldering : Maximum Two Cycles Heating/Cooling temperature slope : 4 / sec. or lower Substrate surface (Land) MMX-EC type Perform reflow soldering within the following conditions. Measuring side : Substrate surface snd Capasitor surface Number of Soldering : Maximum Two Cycles Substrate surface Heating/Cooling temperature slope (Land) : 4 / sec. or lower 30 ~ 40 sec. Capacitor surface 30 ~ 40 sec. Capacitor surface Temperature 240 MAX (Within 5 sec.) Temperature 260 MAX (Within 5 sec.) 220 230 180 190 150 Profile 160 Profile 80 ~ 100 sec. 90 ~ 120 sec. Time Time (2) Please do not use Flow Soldering (3) When using soldering iron Be sure that the iron tip does not touch directly to the capacitor body. Be sure to preheat solder land area sufficiently before soldering by iron. Lead frame Capacitor Solder MML-E type Iron Tip Temperature Soldering duration Soldering Iron Capacity Resoldering : Max.330 : Max.3 sec. : Max.30W : Not available Weld fillet Board Land Soldering iron 42

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MMX-EC type Iron Tip Temperarure Soldering duration Solder Iron Capacity Resoldering : Max.330 : Max.3 sec. : Max.30W : Not available Capacitor Board Land Solder Soldering iron (4) Storage conditons Before open the packaging Temperature : 35 or lower Humidity : 75% or lower Storage Period : One year after the time capacitors packed at our factory After open the packaging Temperature : 30 or lower Humidity : 70% or lower Storage Period : One month (5) Cleaning In case of cleaning, use Freon-substitute-based solvent under the following conditions. (Single or combination for 5 minutes) a. Immersion cleaning (50 or lower) b. Vapor cleaning c. Ultrasonic cleaning (50 or lower, 42kHz, 20W / l ) (6) Mounting Cautions before soldering 1. Be sure to control amount of solder paste to form fillets only at the lead frame area. (applicable for MML-E type only) If capacitor is heated with the electrode metal and solder paste being conducted, melting temperature of the electrode metal might be lowered and result the electrode being melted. Lead frame Capacitor Solder fillet Board 2. Please carry out precedence evaluation before mass production running. Since the heat load to the capacitors is completely different by the reflow furnace (type, capacity) mounting part densitiy, and part heat capacity, the precedence evaluation by mounting conditions is necessary. Check the capacitance of the capacitors does not change after reflow testing. (7) For land dimensions, consult your local Hitachi AIC agent. 4.2 MPET Capacitors MML-F type (1) In the case of Reflow Perform reflow soldering within the following conditions. Measuring side : Substrate surface snd Capasitor surface Number of Soldering : Maximum Two Cycles Heating/Cooling temperature slope : 4 / sec. or lower Substrate surface (Land) 30 ~ 40 sec. Capacitor surface Temperature 220 MAX (Within 5 sec.) 210 180 150 Profile 80 ~ 100 sec. Time (2) Please do not use Flow Soldering 43

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS (3) When using soldering iron Be sure that the iron tip does not touch directly to the capacitor body. Be sure to preheat solder land area sufficiently before soldering by iron. Iron Tip Temperarure Soldering duration Solder Iron Capacity Resoldering (4) Storage conditons : Max.330 : Max.3 sec. : Max.30W : Not available Weld fillet Lead frame Capacitor Board Land Solder Soldering iron Before open the packaging Temperature : 35 or lower Humidity : 75% or lower Storage Period : Six (6) months after the time capacitors packed at our factory After open the packaging Temperature : 30 or lower Humidity : 70% or lower Storage Period : One month (5) Cleaning In case of cleaning, use Freon-substitute-based solvent under the following conditions. (Single or combination for 5 minutes) a. Immersion cleaning(50 or lower) b. Vapor cleaning c. Ultrasonic cleaning (50 or lower, 42kHz, 20W / l ) (6) Mounting Cautions before soldering 1. Be sure to control amount of solder paste to form fillets only at the lead frame area. If capacitor is heated with the electrode metal and solder paste being conducted, melting temperature of the electrode metal might be lowered and result the electrode being melted. Lead frame Capacitor Solder fillet Board 2. Please carry out precedence evaluation before mass production running. Since the heat load to the capacitors is completely different by the reflow furnace (type, capacity) mounting part densitiy, and part heat capacity, the precedence evaluation by mounting conditions is necessary. Check the capacitance of the capacitors does not change after reflow testing. (7) For land dimensions, consult your local Hitachi AIC agent. 5. For Use in Rapid Charging and Discharging Specially designed capacitors are available for rapid charging / discharging applications (e.g., photo flashes, igniters, etc.) When such capacitors are needed, contact your local Hitachi AIC agent. 6. Resonance Sound Applying a high-frequency voltage to the capacitors may generate a resonance sound. This is because the capacitor film mechanically vibrates owing to the Coulomb force which is exerted between the different poles. Although this does not adversely affect electrical performance, bear it in mind when using the capacitors. 7. Others (1) For further details, refer to EIAJ RCR-2350B, Precautions and Guidelines for Using Electronic Device Fixed Plastic Film Capacitors. (2) If you have any questions, feel free to contact your local Hitachi AIC agent. 44

MEMO 45

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MKC, MKC-P Series (Resin encased Type Metallized Polyester Fiim Capacitors, Resin encased Type Metallized Polypropylene Film Capacitors for Aoutmobile) For HEV vehicles DC-DC converter, the object for electric compressors, PHV, for EV vehicles An in-vehicle charger etc. are the high reliability capacitors for automobile. Features Compact and high ripple type High moisture resistance (85 / 85%RH) Various custum type Recommended Applications DC-DC converter for HEV Car charger for PHV and EV Electric air compressors for HEV MKC, and MKC-P Type Product Specifications Items Type of Series MKC Type Temperature Range -40 ~+125 Rated Voltage Capacitance Tolerance Withstanding Voltage Dielectric dissipation factor Insulation resistance Specifications -40 ~+105 MKC-P Type 35, 100V.DC 250, 450V.DC ±5% (J), ±10% (K) ±5% (J), ±10% (K) Rated voltage 1.5, 1minute Rated voltage 1.5, 1minute 1.0% or less (20, 1kHz) 0.1% or less (20, 1kHz) 2,500/C R M or more 7,500/C R M or more Outline of drawings and dimensions Marking L ±0.5 F ±1.0 H ±0.5 T ±0.5 φd Product symbol : (Example) MKC-P Series 450V.DC 1.0mF ±5% MKC-P-2W-105 J Type of series Capacitance tolerance code Capacitance code Rated voltage code MKC, and MKC-P Type Standard value and case size (Unit : mm) Production name R.V (V.dc) Cap. (μf) Size T H L F d MKC-1V-106 35 10.0 10.0 18.5 15.0 12.5 0.8 MKC-2A-395 100 3.9 11.0 20.5 17.0 15.0 0.8 MKC-P-2E-185 250 1.8 11.0 20.5 17.0 15.0 0.8 MKC-P-2W-474 450 0.47 10.5 18.5 17.0 15.0 0.8 MKC-P-2W-105 450 1.0 12.5 22.5 20.0 17.5 1.0 *For ratings that are not described in the table., ask us for further information. 46

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MKC-JS Series (Resin-encased Metallized Polyester Film Capacitors) The MKC-JS series is developed to offer capacitors that have an increased moisture resistance and receive wide use in automotive electrical components, communications devices, and other electronic equipment. It guarantees a rated voltage load of 85, 85% RH, and 500 hours. The employed case and resin parts are made of the 94 V-0 flame-resistant material. A lead pitch of 10 mm is employed for the entire series. Product Specifications Items Temperature range Rated voltage Capacitance tolerance Dielectric dissipation factor Withstanding voltage Insulation resistance Related standard Specifications -40 ~+85 (+105, with derating over 85 ) 100 V.DC ±10% (K) 0.8% or less (20, 1KHz) Between terminals Rated voltage (V.DC) 1.5 for one min Between terminal and outside coating Rated voltage (V.DC) 2.0 for 1 to 5 seconds C R 0.33μF 9,000M or more C R > 0.33μF 3,000 / C R M or more Subject to JIS C 5101-1 and JIS C 5101-2. CR : Capacitance (μf) Outline of drawings and dimensions L 0.5 T 0.5 Marking H 0.5 F 0.5 3.6 0.5 ød Product symbol : (Example) MKC-JS Series 100V.DC 1.0mF ±10% MKC-JS-2A-105 K Type of series Capacitance tolerance code Capacitance code Rated voltage code Standard value and case size (Unit : mm) Capacitance Rated voltage (100V.DC) μf Code T H L F d 0.1 104 4.0 10.0 13.0 10.0 0.6 0.15 154 4.0 10.0 13.0 10.0 0.6 0.22 224 4.0 10.0 13.0 10.0 0.6 0.33 334 4.0 10.0 13.0 10.0 0.6 0.47 474 5.0 11.5 13.0 10.0 0.6 0.58 684 5.0 11.5 13.0 10.0 0.6 1.0 105 6.0 12.0 13.0 10.0 0.6 1.5 155 7.5 13.5 13.0 10.0 0.6 47

P2 L W0 W1 W t GENERAL ELECTRONIC EQUIPMENT PALASTIC FILM CAPACITORS TAPING SPECIFICATION FOR AUTOMATIC INSERTION (MOUNTING) Packaging of Plastic Film Capacitors The following packaging types are available for automatic mounting. Capacitor type MMX-EC MMLF MDDSA MDD-HF MKC-JS Packaging MML-E Lead taping 1 Carrier tape Stick magazine *1 : For capacitors having a lead pitch of 15 mm or less. Lead Taping for Dip Type Capacitor Taping types and outline drawings Taping type A Taping type B P P P1 F H W2 P1 F P0 D0 Taping type C Taping type D Taping type E P P P2 P P1 F P1 F P1 F L W0 W2 W1 H0 W P0 D0 Taping dimensions Item Code Dimension Dimension tplerance Individual dimensions Formed or not Not formed (straight) Formed Taping type code T T2C2 T2C3 T2 4 T2 5 T2 6 Outline drawing A A A B B C C D E E Product lead pitch (F) Each dimensions 5.0 7.5 10.0 12.5 15.0 5.0 7.5 10.0 12.5 15.0 Taping dimensions Each dimensions ±1.0 ±1.0 ±1.5 ±1.5 ±1.5 ±1.0 ±1.0 ±1.5 ±1.5 ±1.5 1 Taping lead pitch F Each dimensions ±0.5 5.0 7.5 10.0 12.5 15.0 5.0 5.0 5.0 5.0 5.0 2 Feed hole pitch P0 ( 1) 12.7 ±0.3 3 Feed hole displacement P2 6.35 ±1.3 P1 ( 2) Each dimensions 3.85 2.60 1.35 0.10 1.15 3.85 3.85 3.85 3.85 3.85 4 Inter-product distance P ( 2) ±1.0 12.7 12.7 12.7 25.4 25.4 12.7 12.7 12.7 25.4 25.4 +1.0-0.5 5 Tape width W ( 3) 18.0 6 Adhesive tape width W0 12.5 MIN 7 Feed hole displacement W1 9.0 ±0.5 8 Adhesive tape displacement W2 ( 3) 3.0 MAX 9 Length to hole center H 20.5 ±0.75 10 Lead clinch height H0 ( 4) 16.0 ±0.5 11 Feed hole diameter D0 4.0 ±0.2 12 Non-standard product cutting position L 11.0 MAX 13 Lead displacement length l 1.0 MAX 14 Tape thickness (overall) t 0.6 ±0.3 15 Inolination limits h ( 5) 0 ±2.0 Other Subject to JIS C 0806-2 (*1) Maximum allowance of pitch tolerance for 20 pitch should be ±1.0mm. (*2) Measuring point is upper end of taping and between center of lead wire. (*3) Adhesive tape should not be exceeded to the carrier tape. (*4) Measuring point is at the bottom of forming crinch. (*5) Measuring point is top of the component. (Unit : mm) 48

MEMO 49

GENERAL ELECTRONIC EQUIPMENT PALASTIC FILM CAPACITORS TAPING SPECIFICATION FOR AUTOMATIC INSERTION (MOUNTING) Product Symbol for Dip Type Capacitor Example : MDDSA Series 100V.DC 0.47mF ±10% Taping type C MDDSA-2A-474 K T 2 C 3 Rated voltage code Type of series Capacitance code Capacitance tolerance code Taping or not: Taped: T Not taped: (blank) Symbol of Taping type code Product lead pitch code Type of lead forming After-forming lead pitch code Examples of taping code Symbol: C Examples: 2C3 Symbol: I Examples: 2I6 Lead pitch codes-product and after-forming Code Dimension (F) 2 5 3 7.5 4 10 5 12.5 6 15 5 7.5 5 15 Taping Types and Packed Quantities for MDDSA Type Capacitor Capacitance μf Code Rated voltage (Code) 100V.DC (2A) 250V.DC (2E) 400V.DC (2G) 630V.DC (2J) Taping Quantity Taping Quantity Taping Quantity Taping Quantity type per pack type per pack type per pack type per pack 0.010 103 A, C 2,000 A, C 2,000 A, C 2,000 A, D 2,000 0.012 123 A, C 2,000 A, C 2,000 A, C 2,000 A, D 2,000 0.015 153 A, C 2,000 A, C 2,000 A, C 2,000 A, D 1,500 0.018 183 A, C 2,000 A, C 2,000 A, C 2,000 A, D 1,500 0.022 223 A, C 2,000 A, C 2,000 A, C 2,000 A, D 1,500 0.027 273 A, C 2,000 A, C 2,000 A, C 2,000 A, D 1,500 0.033 333 A, C 2,000 A, C 2,000 A, C 1,500 A, D 1,000 0.039 393 A, C 2,000 A, C 2,000 A, D 2,000 A, D 1,000 0.047 473 A, C 2,000 A, C 2,000 A, D 2,000 A, D 1,000 0.056 563 A, C 2,000 A, C 2,000 A, D 1,500 B, E 500 0.068 683 A, C 2,000 A, C 2,000 A, D 1,500 B, E 500 0.082 823 A, C 2,000 A, C 2,000 A, D 1,500 B, E 500 0.10 104 A, C 2,000 A, C 1,500 A, D 1,500 B, E 500 0.12 124 A, C 2,000 A, C 1,500 B, E 500 B, E 500 0.15 154 A, C 2,000 A, C 1,000 B, E 500 B, E 500 0.18 184 A, C 2,000 A, D 1,500 B, E 500 0.22 224 A, C 2,000 A, D 1,500 B, E 500 0.27 274 A, C 1,500 A, D 1,000 B, E 500 0.33 334 A, C 1,500 A, D 1,000 B, E 500 0.39 394 A, C 1,000 B, E 500 B, E 500 0.47 474 A, C 1,000 B, E 500 B, E 500 0.56 564 A, D 1,500 B, E 500 0.68 684 A, D 1,500 B, E 500 0.82 824 A, D 1,000 B, E 500 1.0 105 A, D 1,000 B, E 500 1.2 125 B, E 500 B, E 500 1.5 155 B, E 500 1.8 185 B, E 500 2.2 225 B, E 500 2.7 275 B, E 500 3.3 335 B, E 400 50

GENERAL ELECTRONIC EQUIPMENT PALASTIC FILM CAPACITORS TAPING SPECIFICATION FOR AUTOMATIC INSERTION (MOUNTING) For SMD Capacitor Taping Type M M X E C Rated voltage (V.DC) (Unit : mm) Capacitor rating Carrier taping (Fig. 1) Taping reel (Fig. 2) Capacitance (μf) Code A ±0.3 B ±0.3 W ±0.3 P1 ±0.1 A ±4.0 Number of packings/ Reel 100 0.010 2A-103 5.0 6.3 12.0 8.0 330 2,000 100 0.012 2A-123 5.0 6.3 12.0 8.0 330 2,000 100 0.015 2A-153 5.0 6.3 12.0 8.0 330 2,000 100 0.018 2A-183 6.0 8.1 16.0 8.0 250 2,000 100 0.022 2A-223 6.0 8.1 16.0 8.0 250 2,000 100 0.027 2A-273 6.6 9.1 16.0 8.0 330 2,000 100 0.033 2A-333 6.6 9.1 16.0 8.0 330 2,000 100 0.039 2A-393 6.0 8.1 16.0 8.0 250 2,000 100 0.047 2A-473 6.0 8.1 16.0 8.0 250 2,000 100 0.056 2A-563 6.6 9.1 16.0 8.0 330 2,000 100 0.068 2A-683 6.6 9.1 16.0 8.0 330 2,000 100 0.082 2A-823 6.6 9.1 16.0 8.0 330 2,000 100 0.10 2A-104 6.6 9.1 16.0 8.0 330 2,000 100 0.12 2A-124 6.6 9.1 16.0 8.0 330 2,000 100 0.15 2A-154 7.4 8.4 16.0 12.0 330 1,000 100 0.18 2A-184 7.6 10.6 16.0 12.0 330 1,000 100 0.22 2A-224 7.6 10.6 16.0 12.0 330 1,000 Type M M L E M M L F Rated voltage (V.DC) (Unit : mm) Capacitor rating Carrier taping (Fig. 1) Taping reel (Fig. 2) Capacitance (μf) Code A ±0.3 B ±0.3 W ±0.3 P1 ±0.1 A ±4.0 Number of packings/ Reel 100 0.010 2A-103 6.6 9.1 16.0 8.0 250 1,000 100 0.012 2A-123 6.6 9.1 16.0 8.0 250 1,000 100 0.015 2A-153 6.6 9.1 16.0 8.0 250 1,000 100 0.018 2A-183 6.6 9.1 16.0 8.0 250 1,000 100 0.022 2A-223 6.6 9.1 16.0 8.0 250 1,000 100 0.027 2A-273 6.6 9.1 16.0 8.0 250 1,000 100 0.033 2A-333 6.6 9.1 16.0 8.0 250 1,000 100 0.039 2A-393 6.6 9.1 16.0 8.0 250 1,000 100 0.047 2A-473 6.6 9.1 16.0 8.0 250 1,000 100 0.056 2A-563 6.6 9.1 16.0 8.0 250 1,000 100 0.068 2A-683 6.6 9.1 16.0 8.0 250 1,000 100 0.082 2A-823 7.4 8.4 16.0 12.0 330 1,000 100 0.10 2A-104 7.4 8.4 16.0 12.0 330 1,000 100 0.12 2A-124 7.4 8.4 16.0 12.0 330 1,000 100 0.15 2A-154 7.4 8.4 16.0 12.0 330 1,000 100 0.18 2A-184 8.0 11.4 24.0 12.0 330 1,000 100 0.22 2A-224 8.0 11.4 24.0 12.0 330 1,000 250 0.010 2E-103 6.6 9.1 16.0 8.0 250 1,000 250 0.012 2E-123 6.6 9.1 16.0 8.0 250 1,000 250 0.015 2E-153 6.6 9.1 16.0 8.0 250 1,000 250 0.018 2E-183 6.6 9.1 16.0 8.0 250 1,000 250 0.022 2E-223 6.6 9.1 16.0 8.0 250 1,000 250 0.027 2E-273 6.6 9.1 16.0 8.0 250 1,000 250 0.033 2E-333 7.4 8.4 16.0 12.0 330 1,000 250 0.039 2E-393 7.4 8.4 16.0 12.0 330 1,000 250 0.047 2E-473 7.4 8.4 16.0 12.0 330 1,000 250 0.056 2E-563 7.4 8.4 16.0 12.0 330 1,000 250 0.068 2E-683 8.0 11.4 24.0 12.0 330 1,000 250 0.082 2E-823 8.0 11.4 24.0 12.0 330 1,000 250 0.10 2E-104 8.0 11.4 24.0 12.0 330 1,000 630 0.010 2J-103 7.1 11.2 24.0 12.0 330 1,000 630 0.015 2J-153 7.1 11.2 24.0 12.0 330 1,000 630 0.022 2J-223 8.0 11.4 24.0 12.0 330 1,000 630 0.033 2J-333 10.0 11.5 24.0 12.0 330 1,000 Embossed Tape Taping Reel 0.3 0.1 Perforation ø1.5 +0.1 A B 0 Pocket 1.75 0.1 F 0.3 W ø21 0.5 2.0 1R ø13 0.5 ø50 MIN øa 4.0 When mounted with covers 6.5 or less P1 Symbol Tape Width (W) 12.0 16.0 24.0 F 5.5±0.05 7.5±0.1 11.5±0.1 Fig. 1 4.0 0.1 ø1.5 or more Direction of 2 0.1 tape fiow (Unit : mm) 2.0 0.5 (Unit : mm) Symbol Reel Diameter (A) 250 330 W 14.0±1.5 17.4±1.0 14.0±1.5 17.4±1.0 25.4±1.0 Fig. 2 W 51

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MDDSA Series (Small Type Metallized Polyester Capacitors) MDDSA series is the reduced size of conventional MDD type, light weight and high reliability metallized polyester film capacitors. The size is reduced by 40 to 50% of conventional MDD type. The capacitance range is extended from 0.01μF to 10μF. Humidity resistance is greatly improved through special production technique. Excellent in flame retardant property with outside coating of flame resistance epoxy resin. Tracking resistance is improved. For lead forming and taping, see page 213 and 214. Product Specifications Items Temperature range Rated voltage Capacitance tolerance Dielectric dissipation factor Withstanding voltage Insulation resistance Related standard Specifications -40 ~+85 (+105, with derating over 85 ) 100~630 V.DC ±5% (J), ±10% (K), ±20% (M) 0.8% or less (20, 1KHz) Between terminals Rated voltage (V.DC) 1.4 for one min Between terminal and outside coating Rated voltage (V.DC) 2.0 for 1 to 5 seconds C R 0.33μF 7,500M or more C R > 0.33μF 2,500 / C R M or more Subject to JIS C 5101-1 and JIS C 5101-2. C R : Capacitance (μf) Outline of drawings and dimensions L MAX TMAX Marking H MAX F 1.0 20 MIN G MAX ød G : 1.0 mm when F Dimension is less than 7.5 mm. 1.5 mm when F Dimension is more than 10 mm. 52

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS Standard value and case size (Unit : mm) Rated voltage (Code) Capacitance 100V.DC (2A) 250V.DC (2E) 400V.DC (2G) 630V.DC (2J) μf Code T H L F d T H L F d T H L F d T H L F d 0.010 103 4.5 7.5 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 4.5 8.0 10.0 7.5 0.6 4.5 8.0 12.5 10.0 0.6 0.012 123 4.5 7.5 8.5 5.0 0.5 4.5 8.5 10.0 7.5 0.6 4.5 8.5 10.0 7.5 0.6 4.5 8.5 12.5 10.0 0.6 0.015 153 4.5 7.5 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 4.5 8.0 10.0 7.5 0.6 5.0 9.0 12.5 10.0 0.6 0.018 183 4.5 7.5 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 4.5 8.0 10.0 7.5 0.6 5.0 9.5 12.5 10.0 0.6 0.022 223 4.5 7.5 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 4.5 8.0 10.0 7.5 0.6 5.5 10.0 12.5 10.0 0.6 0.027 273 4.5 7.5 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 5.0 8.5 10.0 7.5 0.6 5.5 11.0 12.5 10.0 0.6 0.033 333 4.5 7.5 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 5.0 9.0 10.0 7.5 0.6 6.0 11.5 12.5 10.0 0.6 0.039 393 4.5 7.5 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 4.5 8.0 12.5 10.0 0.6 6.5 12.0 12.5 10.0 0.6 0.047 473 4.5 8.0 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 4.5 9.0 12.5 10.0 0.6 7.5 12.5 12.5 10.0 0.6 0.056 563 4.5 8.0 8.5 5.0 0.5 4.5 8.0 10.0 7.5 0.6 5.0 9.0 12.5 10.0 0.6 5.5 11.0 18.0 15.0 0.6 0.068 683 4.5 8.0 8.5 5.0 0.5 4.5 8.5 10.0 7.5 0.6 5.5 9.5 12.5 10.0 0.6 6.0 11.5 18.0 15.0 0.6 0.082 823 4.5 8.0 8.5 5.0 0.5 4.5 9.0 10.0 7.5 0.6 5.5 10.5 12.5 10.0 0.6 6.0 13.0 18.0 15.0 0.6 0.10 104 4.5 8.0 8.5 5.0 0.5 5.0 9.0 10.0 7.5 0.6 6.0 11.0 12.5 10.0 0.6 6.5 13.5 18.0 15.0 0.6 0.12 124 4.5 8.0 10.0 7.5 0.6 5.5 9.5 10.0 7.5 0.6 5.0 10.0 18.0 15.0 0.6 7.5 14.0 18.0 15.0 0.8 0.15 154 4.5 8.5 10.0 7.5 0.6 6.0 10.0 10.0 7.5 0.6 5.0 10.5 18.0 15.0 0.6 8.0 15.0 18.0 15.0 0.8 0.18 184 4.5 8.5 10.0 7.5 0.6 5.0 10.0 12.5 10.0 0.6 5.5 11.0 18.0 15.0 0.6 9.0 15.5 18.0 15.0 0.8 0.22 224 5.0 8.5 10.0 7.5 0.6 5.5 10.5 12.5 10.0 0.6 6.0 12.0 18.0 15.0 0.6 9.5 16.5 18.0 15.0 0.8 0.27 274 5.0 9.0 10.0 7.5 0.6 6.0 11.0 12.5 10.0 0.6 6.5 12.5 18.0 15.0 0.8 7.5 17.5 25.5 22.5 0.8 0.33 334 5.5 9.5 10.0 7.5 0.6 6.5 11.5 12.5 10.0 0.6 7.0 12.5 18.0 15.0 0.8 8.0 18.5 25.5 22.5 0.8 0.39 394 6.0 9.5 10.0 7.5 0.6 5.0 12.0 18.0 15.0 0.6 7.0 14.0 18.0 15.0 0.8 9.0 19.0 25.5 22.5 0.8 0.47 474 6.5 10.0 10.0 7.5 0.6 5.5 12.0 18.0 15.0 0.6 8.0 14.5 18.0 15.0 0.8 10.0 20.0 25.5 22.5 0.8 0.56 564 5.5 10.5 12.5 10.0 0.6 6.0 12.5 18.0 15.0 0.6 7.0 14.0 25.5 22.5 0.8 11.0 21.0 25.5 22.5 0.8 0.68 684 5.5 11.0 12.5 10.0 0.6 6.5 13.0 18.0 15.0 0.8 7.5 14.5 25.5 22.5 0.8 12.0 22.5 25.5 22.5 0.8 0.82 824 6.0 11.5 12.5 10.0 0.6 7.0 14.0 18.0 15.0 0.8 7.5 16.0 25.5 22.5 0.8 12.0 22.5 30.5 27.5 0.8 1.0 105 6.5 12.0 12.5 10.0 0.6 7.5 14.5 18.0 15.0 0.8 8.5 17.0 25.5 22.5 0.8 13.5 24.0 30.5 27.5 0.8 1.2 125 5.5 12.0 18.0 15.0 0.8 8.5 15.0 18.0 15.0 0.8 9.5 18.0 25.5 22.5 0.8 15.0 25.0 30.5 27.5 0.8 1.5 155 6.0 12.5 18.0 15.0 0.8 9.0 16.0 18.0 15.0 0.8 9.0 18.0 30.5 27.5 0.8 16.5 27.0 30.5 27.5 0.8 1.8 185 6.5 13.0 18.0 15.0 0.8 8.0 15.0 25.5 22.5 0.8 10.0 19.0 30.5 27.5 0.8 18.5 29.0 30.5 27.5 0.8 2.2 225 7.0 14.0 18.0 15.0 0.8 9.0 16.0 25.5 22.5 0.8 11.0 20.0 30.5 27.5 0.8 21.5 31.5 30.5 27.5 0.8 2.7 275 8.0 14.5 18.0 15.0 0.8 10.0 17.0 25.5 22.5 0.8 3.3 335 8.5 16.0 18.0 15.0 0.8 11.0 18.0 25.5 22.5 0.8 Product symbol : (Example) MDDSA Series 100V.DC 0.47mF ±10% 3.9 395 7.5 14.5 25.5 22.5 0.8 11.5 20.0 25.5 22.5 0.8 4.7 475 7.5 16.5 25.5 22.5 0.8 12.5 21.0 25.5 22.5 0.8 MDDSA-2A-474 K 5.6 565 8.5 17.0 25.5 22.5 0.8 12.0 21.0 30.5 27.5 0.8 Capacitance tolerance code 6.8 685 9.5 18.5 25.5 22.5 0.8 14.0 22.0 30.5 27.5 0.8 Capacitance code 8.2 825 11.0 20.0 25.5 22.5 0.8 15.0 23.0 30.5 27.5 0.8 Rated voltage code 10.0 106 11.5 21.0 25.5 22.5 0.8 16.5 25.0 30.5 27.5 0.8 Type of series For taping, ask us for further information. 53

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MDD-HD(4) Series Features The size reduced by 35% of conventional Improve of pulse resistance with the technology for Automobile Flame retardant epoxy resin (UL94V-0)coating type (Resin Dip Type Metallized Polyester Film Capacitors for PFC use only) Product Specifications Items Temperature range Rated voltage Capacitance tolerance Dielectric dissipation factor Withstanding voltage Insulation resistance Related standard Specifications -40 ~+85 (+105 with derating over 85 ) 450 V.DC ±10% (K) 0.8% or less (20, 1KHz) Rated voltage (V.DC) 1.4 Between terminals 2,500 / C R M or more Subject to JIS C 5101-1 and JIS C 5101-2 C R : Capacitance (μf) Outline of drawings and dimensions L MAX T MAX F ±1.0 Marking H MAX 20 MIN 1.5 MAX φd Desingnasion : (Example) MDD-HD(4) Series 450V.DC 1.0mF±10% MDD-HD- 2W- 105 K 4 Suffix Capacitance tolerance code Type of series Capacitance code Rated voltage code Standard value and case size No. Production name (Unit : mm) Cap. Tol. R.V Size I0-p (μf) (%) (VDC) T H L F d A0-p 1 MDD-HD-2W-474K4 0.47 ±10 450 6.8 13.8 12.5 10.0 0.6 14.0 2 MDD-HD-2W-684K4 0.68 ±10 450 5.5 13.5 17.8 15.0 0.8 11.0 3 MDD-HD-2W-105K4 1.0 ±10 450 7.0 15.5 17.8 15.0 0.8 16.0 4 MDD-HD-2W-155K4 1.5 ±10 450 6.8 15.5 25.5 22.5 0.8 15.0 5 MDD-HD-2W-225K4 2.2 ±10 450 8.5 17.0 25.5 22.5 0.8 22.0 54

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MDD-HD(4HS) Series Features The size reduced by 25% of conventional Improve of pulse resistance with the technology for Automobile The buzz noise reduced by 10dB of conventional Flame retardant epoxy resin (UL94V-0)coating type (Resin Dip Type Metallized Polyester Film Capacitors for PFC use only) Product Specifications Items Temperature range Rated voltage Capacitance tolerance Dielectric dissipation factor Withstanding voltage Insulation resistance Related standard Specifications -40 ~+85 (+105 with derating over 85 ) 450 V.DC ±10% (K) 0.8% or less (20, 1KHz) Rated voltage (V.DC) 1.4 Between terminals 2,500 / C R M or more Subject to JIS C 5101-1 and JIS C 5101-2 C R : Capacitance (μf) Outline of drawings and dimensions L MAX T MAX F ±1.0 Marking H MAX 20 MIN 1.5 MAX φd Desingnasion : (Example) MDD-HD(4HS) Series 450V.DC 1.0mF±10% MDD-HD- 2W- 105 K 4HS Suffix Capacitance tolerance code Type of series Capacitance code Rated voltage code Standard value and case size No. Production name (Unit : mm) Cap. Tol. R.V Size I0-p (μf) (%) (VDC) T H L F d A0-p 1 MDD-HD-2W-474K4HS 0.47 ±10 450 8.0 15.0 12.5 10.0 0.6 15.0 2 MDD-HD-2W-684K4HS 0.68 ±10 450 6.5 15.0 17.8 15.0 0.8 12.0 3 MDD-HD-2W-105K4HS 1.0 ±10 450 8.0 16.5 17.8 15.0 0.8 18.0 4 MDD-HD-2W-155K4HS 1.5 ±10 450 8.0 16.5 25.5 22.5 0.8 16.0 5 MDD-HD-2W-225K4HS 2.2 ±10 450 9.5 19.0 25.5 22.5 0.8 24.0 55

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MDD-P(4) Series Features (Resin Dip Type Metallized Polypropylene Film Capacitors for PFC use only) Self-healing and high frequency characteristc due to polypropylene film and non-inductive construction Flame retardant epoxy resin (UL94V-0)coating type Product Specifications Items Temperature range Rated voltage Capacitance tolerance Dielectric dissipation factor Withstanding voltage Insulation resistance Related standard -40 ~+85 450 V.DC ±10% (K) 0.1% or less (20, 1KHz) Rated voltage (V.DC) 1.4 Between terminals 7,500 / C R M or more Subject to JIS C 5101-1 and JIS C 5101-16 Specifications C R : Capacitance (μf) Outline of drawings and dimensions L MAX T MAX F ±1.0 Marking H MAX 20 MIN 1.5 MAX φd Desingnasion : (Example) MDD-P(4) Series 450V.DC 1.0mF±10% MDD-P- 2W- 105 K 4 Suffix Capacitance tolerance code Type of series Capacitance code Rated voltage code Standard value and case size (Unit : mm) No. Production name Cap. Tol. R.V Size I0-p (μf) (%) (VDC) T H L F d A0-p 1 MDD-P-2W-474K4 0.47 ±10 450 8.3 15.4 12.5 10.0 0.6 19.0 2 MDD-P-2W-684K4 0.68 ±10 450 7.5 14.2 17.8 15.0 0.8 15.0 3 MDD-P-2W-105K4 1.0 ±10 450 9.2 15.8 17.8 15.0 0.8 22.0 4 MDD-P-2W-155K4 1.5 ±10 450 8.3 16.5 25.5 22.5 0.8 21.0 5 MDD-P-2W-225K4 2.2 ±10 450 9.8 18.0 25.5 22.5 0.8 31.0 56

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MDD-HF Series (High-frequency Current, Resin Dip Type PPS Film Capacitors) PPS film based, dip type film capacitors which are developed on the basis of the MDD capacitor production technology to offer increased heat resistance and enhanced performance characteristics. Features Offers excellent electrical performance characteristics and remains stable relative to temperature, frequency, and voltage. Exhibits increased heat resistance. Excels in loss characteristics and generates a minimum of heat at high frequency. Refer to page 213 and 214 for lead wire forming and taping type. Product Specifications Items Temperature range Rated voltage Capacitance tolerance Dielectric dissipation factor Withstanding voltage Insulation resistance Specifications -40 ~+105 (+125, with derating over 105 ) 100, 250 V.DC ±5% (J), ±10% (K)) 0.1% or less (20, 1KHz) Rated voltage (V.DC) 1.5 for one min. 15,000 M or more. Outline of drawings and dimensions L MAX T MAX Product symbol : (Example) MDD-HF Series 100V.DC 0.1mF ±10% F ±1.0 Marking H MAX 20 MIN 1.5 MAX φd MDD-HF-2A-104 K T 2C3 Type of series Forming With or without taping Capacitance tolerance code Capacitance code Rated voltage code Standard value and case size (Unit : mm) Capacitance μf Code 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 T 4.5 4.5 4.9 4.5 4.7 4.7 4.9 5.2 5.5 5.2 5.2 5.3 5.7 4.8 4.7 5.0 5.3 5.6 6.1 H 7.5 7.5 7.7 7.5 7.5 8.3 9.0 9.3 9.5 8.0 8.5 9.0 9.3 8.4 10.0 10.2 10.5 10.8 11.3 L 8.5 8.5 8.5 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 13.0 13.0 13.0 13.0 13.0 13.0 100V.DC (2A) F f d 5.0 0.5 0.5 5.0 0.5 0.6 5.0 0.5 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 10.5 1.0 0.6 10.5 1.0 0.6 10.5 1.0 0.6 10.5 1.0 0.6 10.5 1.0 0.6 10.5 1.0 0.6 Rated voltage (100V.DC) Taping type Package quantity / case T H A,C 2,000 4.5 7.5 A,C 2,000 4.5 7.5 A,C 2,000 4.9 7.7 A,C 2,000 4.5 7.5 A,C 2,000 4.7 7.5 A,C 2,000 4.7 8.3 A,C 1,500 4.9 9.0 A,C 1,500 5.2 9.3 A,C 1,500 5.5 9.5 A,C 2,000 5.0 9.0 A,C 1,500 5.5 9.5 A,C 1,500 6.0 9.5 A,C 1,500 6.0 10.5 A,D 1,500 A,D 1,500 A,D 1,500 A,D 1,500 A,D 1,500 A,D 1,000 L 8.5 8.5 8.5 11.0 11.0 11.0 11.0 11.0 11.0 13.5 13.5 13.5 13.5 250V.DC (2E) F f d 5.0 0.5 0.5 5.0 0.5 0.6 5.0 0.5 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 7.5 1.0 0.6 10.5 1.0 0.6 10.5 1.0 0.6 10.5 1.0 0.6 10.5 1.0 0.6 Taping type Package quantity/case A,C 2,000 A,C 2,000 A,C 2,000 A,C 2,000 A,C 2,000 A,C 2,000 A,C 1,500 A,C 1,500 A,C 1,500 A,D 1,500 A,D 1,500 A,D 1,500 A,D 1,000 57

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MDD-P, MTB-P Series (Metallized Polypropylene Film Capacitors for High frequency) These types are metallized polypropylene film capacitors that have been used for many years and are suitable for communication devices and inverter fluorescent lighting. Use either resin dip type (MDD-P type)or tape wrapped type (MTB-P type)depending on the operating condition. Product Specifications Item Temperature Range Rated voltage Capacitance tolerance Dissipation factor Withstanding voltage Insulation resistance Related standard Specification -40 ~+85 250~630V.DC ±5% (J), ±10% (K), ±20% (M) 0.1% or less (20, 1kHz) Between terminals Rated voltage (V.DC) 1.4 for one min Between terminal and outside coating Rated voltage (V.DC) 2.0 for 1 to 5 seconds CR 0.33μF 25,000M or more CR > 0.33μF 7,500 / CR M or more Subject to JIS C 5101-1 and JIS C 5101-16. C R : Capacitance (μf) Product symbol: (Example) MDD-P series 250 V.DC 0.1mF±10% MDD-P-2E-104 K Type of series Capacitance tolerance code Capacitance code Rated voltage code MDD-P Series (Resin Dip Type Metallized Polypropylene Film Capacitors) Outline of drawings and dimensions L MAX T MAX Marking F 1.5 20 MIN H MAX 3.0 MAX ød Standard value and case size (Unit : mm) Capacitance Rated voltage (code) 250V.DC (2E) 400V.DC (2G) 630V.DC (2J) μf Code T H L F d T H L F d T H L F d 0.027 273 7.0 10.5 18.0 15.0 0.6 0.033 333 7.0 11.0 15.0 12.5 0.6 7.5 11.0 18.0 15.0 0.6 0.039 393 7.5 11.5 15.0 12.5 0.6 8.0 11.5 18.0 15.0 0.6 0.047 473 7.5 12.5 15.0 12.5 0.6 8.0 13.0 18.0 15.0 0.6 0.056 563 6.5 10.5 20.0 17.5 0.6 8.5 13.5 18.0 15.0 0.6 0.068 683 6.5 10.0 15.0 12.5 0.6 7.0 11.5 20.0 17.5 0.6 8.0 13.0 26.0 22.5 0.8 0.082 823 7.0 10.5 15.0 12.5 0.6 7.5 12.5 20.0 17.5 0.6 8.5 13.5 26.0 22.5 0.8 0.10 104 7.0 12.0 15.0 12.5 0.6 8.0 13.0 20.0 17.5 0.6 9.0 15.5 26.0 22.5 0.8 0.12 124 7.5 12.5 15.0 12.5 0.6 8.5 13.5 20.0 17.5 0.8 9.5 16.0 26.0 22.5 0.8 0.15 154 7.0 11.0 20.0 17.5 0.6 9.5 14.5 20.0 17.5 0.8 10.5 17.0 26.0 22.5 0.8 0.18 184 7.0 12.0 20.0 17.5 0.6 10.5 15.5 20.0 17.5 0.8 11.5 18.0 26.0 22.5 0.8 0.22 224 7.5 12.5 20.0 17.5 0.6 11.5 16.5 20.0 17.5 0.8 11.5 18.0 29.0 25.0 0.8 0.27 274 8.5 13.0 20.0 17.5 0.6 9.5 16.0 29.0 25.0 0.8 12.5 19.5 29.0 25.0 0.8 0.33 334 8.5 15.0 20.0 17.5 0.6 10.5 16.5 29.0 25.0 0.8 13.0 22.5 29.0 25.0 0.8 0.39 394 9.0 15.5 20.0 17.5 0.6 11.0 17.5 29.0 25.0 0.8 14.0 23.5 29.0 25.0 0.8 0.47 474 8.5 15.0 26.0 22.5 0.6 12.0 18.5 29.0 25.0 0.8 13.0 22.5 36.0 32.5 0.8 0.56 564 9.0 15.5 26.0 22.5 0.8 13.0 19.5 29.0 25.0 0.8 14.0 23.5 36.0 32.5 0.8 0.68 684 10.0 16.5 26.0 22.5 0.8 13.0 23.0 29.0 25.0 0.8 0.82 824 10.0 19.5 26.0 22.5 0.8 12.0 22.0 36.0 32.5 0.8 1.0 105 10.0 19.5 31.0 27.5 0.8 13.5 23.0 36.0 32.5 0.8 58

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MTB-P Series (Tape Wrapped Metallized Polypropylene Film Capacitors) Outline of drawings and dimensions W MAX ød Marking 30 MIN L MAX 30 MIN T MAX Standard value and case size (Unit : mm) Capacitance Rated voltage (code) 250V.DC (2E) 400V.DC (2G) 630V.DC (2J) μf Code T W L d T W L d T W L d 0.027 273 5.0 9.0 20.0 0.6 0.033 333 5.5 9.0 16.0 0.6 5.5 9.5 20.0 0.6 0.039 393 6.0 9.5 16.0 0.6 6.0 10.0 20.0 0.6 0.047 473 6.0 11.0 16.0 0.6 6.5 11.5 20.0 0.6 0.056 563 5.0 9.0 21.0 0.6 7.0 12.0 20.0 0.6 0.068 683 4.5 8.5 16.0 0.6 5.0 10.0 21.0 0.6 6.0 11.0 26.0 0.6 0.082 823 5.0 9.0 16.0 0.6 5.5 10.5 21.0 0.6 7.0 11.5 26.0 0.8 0.10 104 5.5 10.5 16.0 0.6 6.5 11.0 21.0 0.6 7.5 12.5 26.0 0.8 0.12 124 6.0 11.0 16.0 0.6 7.0 12.0 21.0 0.6 7.5 14.0 26.0 0.8 0.15 154 5.5 9.0 21.0 0.6 8.0 13.0 21.0 0.6 9.0 15.0 26.0 0.8 0.18 184 5.5 10.5 21.0 0.6 8.5 13.5 21.0 0.6 9.5 16.0 26.0 0.8 0.22 224 6.0 11.0 21.0 0.6 9.5 14.5 21.0 0.6 10.0 16.5 29.0 0.8 0.27 274 6.5 11.5 21.0 0.6 7.5 14.0 29.0 0.8 11.0 17.5 29.0 0.8 0.33 334 7.0 13.5 21.0 0.6 8.5 15.0 29.0 0.8 11.0 20.5 29.0 0.8 0.39 394 7.5 14.0 21.0 0.6 9.5 15.5 29.0 0.8 12.0 22.0 29.0 0.8 0.47 474 7.0 13.0 26.0 0.6 10.5 16.5 29.0 0.8 11.0 20.5 37.0 0.8 0.56 564 7.5 14.0 26.0 0.6 11.5 17.5 29.0 0.8 12.5 22.0 37.0 0.8 0.68 684 8.5 15.0 26.0 0.6 11.5 21.0 29.0 0.8 0.82 824 8.0 18.0 26.0 0.6 10.5 20.0 37.0 0.8 1.0 105 8.0 18.0 31.0 0.8 12.0 21.0 37.0 0.8 59

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MTBS, MTB Series (Tape Wrapped Metallized Polyester Film Capacitors) This series offers metallized film capacitors that have axial leads and exhibit excellent heat resistance and moisture resistance. These capacitors employ a metallized polyester film dielectric and have a polyester-taped outer covering and resin-sealed ends. Product Specifications Items Temperature range Rated voltage Capacitance tolerance Withstanding voltage Dielectric dissipation factor Insulation resistance Related standard -40 ~+85 100 ~ 630 V.DC ±5% (J), ±10% (K), ±20% (M) Rated voltage (V.DC) 1.4 for one min. 0.8% or less (20, 1KHz) CR μf 7,500M or more CR > 0.33μF 2,500 / CR M or more Subject to JIS C 5101-1 and JIS C 5101-2. Specifications C R : Capacitance (μf) Outline of drawings and dimensions Marking ød W MAX 30 MIN L MAX 30 MIN T MAX Standard value and case size (Unit : mm) MTBS MTB Capacitance Rated voltage (Code) 100V.DC (2A) 250V.DC (2E) 400V.DC (2G) 630V.DC(2J) μf Code T W L d T W L d T W L d T W L d 0.022 223 4.0 7.0 14.0 0.6 4.5 9.0 16.0 0.6 0.033 333 4.0 7.5 16.0 0.6 5.5 9.0 16.0 0.6 0.047 473 4.0 7.5 14.0 0.6 5.0 8.5 16.0 0.6 4.5 9.5 22.0 0.6 0.068 683 4.0 7.5 16.0 0.6 6.0 9.5 16.0 0.6 5.5 10.5 22.0 0.6 0.10 104 4.5 9.0 16.0 0.6 5.0 10.0 22.0 0.6 6.5 13.0 22.0 0.6 0.12 124 5.0 9.5 16.0 0.6 5.5 10.5 22.0 0.6 7.0 13.5 22.0 0.6 0.15 154 5.5 10.5 16.0 0.6 6.5 11.0 22.0 0.6 6.5 11.5 29.0 0.8 0.18 184 6.0 11.0 16.0 0.6 6.5 12.5 22.0 0.6 6.5 13.0 29.0 0.8 0.22 224 5.0 10.0 22.0 0.6 7.0 13.5 22.0 0.6 7.5 14.0 29.0 0.8 0.27 274 4.0 8.0 14.0 0.6 5.5 10.5 22.0 0.6 8.0 14.5 22.0 0.6 7.5 17.0 29.0 0.8 0.33 334 4.5 8.5 14.0 0.6 6.0 11.0 22.0 0.6 7.0 13.5 29.0 0.8 8.0 17.5 31.0 0.8 0.39 394 5.0 9.0 14.0 0.6 7.0 11.5 22.0 0.6 7.5 14.0 29.0 0.8 9.0 18.5 31.0 0.8 0.47 474 5.5 9.5 14.0 0.6 7.5 12.5 22.0 0.6 8.5 14.5 29.0 0.8 9.5 19.0 31.0 0.8 0.56 564 4.5 9.5 20.0 0.6 6.0 12.0 29.0 0.8 8.0 17.5 29.0 0.8 11.0 20.5 31.0 0.8 0.68 684 5.0 9.5 20.0 0.6 6.5 13.0 29.0 0.8 9.0 18.5 29.0 0.8 11.0 23.5 31.0 0.8 0.82 824 5.0 10.0 20.0 0.6 7.0 13.5 29.0 0.8 10.0 19.5 29.0 0.8 12.5 25.0 31.0 0.8 1.0 105 6.0 10.5 20.0 0.6 7.0 16.5 29.0 0.8 11.5 21.0 29.0 0.8 14.0 26.5 31.0 0.8 1.2 125 6.5 11.5 20.0 0.6 8.0 17.5 29.0 0.8 12.0 21.5 31.0 0.8 12.5 25.0 43.0 1.0 1.5 155 7.0 12.5 20.0 0.6 9.0 18.5 29.0 0.8 14.0 23.5 31.0 0.8 14.0 26.5 43.0 1.0 1.8 185 7.0 12.0 22.0 0.8 10.0 19.5 29.0 0.8 12.5 22.0 43.0 1.0 15.5 28.5 43.0 1.0 2.2 225 7.5 13.0 22.0 0.8 11.0 21.0 29.0 0.8 14.0 24.0 43.0 1.0 15.5 28.0 52.0 1.0 2.7 275 8.5 14.0 22.0 0.8 9.5 19.0 43.0 1.0 14.0 24.0 43.0 1.0 3.3 335 9.0 16.0 22.0 0.8 10.5 20.5 43.0 1.0 16.0 28.5 43.0 1.0 3.9 395 10.0 17.0 22.0 0.8 12.0 21.5 43.0 1.0 16.5 32.5 43.0 1.0 4.7 475 11.0 17.5 22.0 0.8 13.5 23.0 43.0 1.0 15.5 31.0 52.0 1.0 5.6 565 11.0 17.5 26.0 0.8 13.0 22.5 52.0 1.0 6.8 685 12.0 18.5 26.0 0.8 14.5 24.0 52.0 1.0 8.2 825 11.5 18.5 29.0 0.8 16.0 25.5 52.0 1.0 10.0 106 12.5 20.5 29.0 0.8 16.5 29.5 52.0 1.0 Product symbol : (Example) MTB Series 630V.DC 0.1mF ±10% MTB-2J-104 K Type of series Capacitance tolerance code Capacitance code Rated voltage code Product symbol : (Example) MTBS Series 100V.DC 1.0mF ±10% MTBS-2A-105 K Type of series Specify as MTBS when ordering 100V DC items 60

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS WMTB, WMTB-P Series (High-frequency Large- Tapewrapped Capacitors) (For Snubbers) The WMTB / WMTB-P series offers tape-wrapped capacitors which are developed for applications where high-frequency is essential. Being small and lightweight, these capacitors are ideal for use in high-frequency large- circuits for high-frequency surge suppressors, various inverter circuits, snubber circuits, and the like. WMTB, and WMTB-P Type Product Specifications Items Specifications Type of Series Dielectric Temperature range Rated voltage Capacitance tolerance Withstanding voltage Dielectric dissipation factor WMTB Type Metallized polyester -40 ~+85 630V.DC ±10% (K) Rated voltage (V.DC) 1.5 for one min. 0.8% or less (20, 1KHz) WMTB-P Type Metallized polypropylene -40 ~+85 1,200V.DC ±10% (K) Rated voltage (V.DC) 1.5 for one min. 0.1% or less (20, 1KHz) Insulation resistance C R μf 9,000M or more C R μf 30,000M or more C R > 0.33μF 3,000 / C R M or more C R > 0.33μF 10,000 / C R M or more C R : Capacitance (μf) Outline of drawings and dimensions Marking ød W MAX 30 MIN L MAX 30 MIN T MAX Product symbol : (Example) WMTB-P Series 1200V.DC 0.1mF ±10% WMTB-P-1200-104 K Type of series Capacitance tolerance code Capacitance code Rated voltage code WMTB, and WMTB-P Type Standard value and case size (Unit : mm) Capacitance Rated voltage 630V.DC (WMTB Type) 1200V.DC (WMTB-P Type) μf Code T W L d T W L d 0.10 104 11.0 20.0 36.0 0.8 0.15 154 13.5 23.0 36.0 0.8 0.22 224 10.5 20.0 29.0 0.8 17.0 26.0 36.0 0.8 0.33 334 11.0 20.5 33.0 0.8 15.5 25.0 41.0 1.0 0.47 474 13.0 22.5 33.0 0.8 20.0 29.0 41.0 1.0 0.68 684 14.0 24.0 41.0 1.0 23.5 33.0 41.0 1.0 1.0 105 16.5 27.5 41.0 1.0 21.0 35.5 54.0 1.0 1.5 155 18.0 27.5 52.0 1.0 2.2 225 21.0 33.5 52.0 1.0 61

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MMX-EC Series (For SMD Metallized Polyphenylene Sulfide Film Capacitors) Features Case-less, high-performance, high-reliability metallized film capacitors Re-flow soldering temperature is 260 Suitable for the inverter power supplies Discontinued Last purchasing order : 30 / Sep / 2016 Last shipment : 28 / DEC / 2016 Product Specifications Items Temperature range Rated voltage Capacitance tolerance Dielectric dissipation factor Withstanding voltage Insulation resistance Solder heat resistance For standard soldering conditions, see page 206 and 207. Specifications -40 ~+105 (+125, with derating over 105 ) 100 V.DC ±5% (J), ±10% (K) 0.15% or less (20, 1KHz) Rated voltage (V.DC) 1.5 for one min. 15,000 M or more Reflow : Peak 260 for 5 sec. or less (Capacitor surface) Outline of drawings and dimensions Marking Soldering terminal a MIN L ±0.3 b MIN H ±0.4 W ±0.4 Standard value and case size (Unit : mm) Capacitance Rated voltage (Code) 100V.DC/63V.AC (2A) (μf) Code H W L a b 0.010 103 2.2 4.5 5.7 0.2 3.0 0.012 123 2.2 4.6 5.7 0.2 3.0 0.015 153 2.4 4.8 5.7 0.2 3.0 0.018 183 1.7 5.5 7.7 0.2 5.0 0.022 223 1.8 5.4 7.7 0.2 5.0 0.027 273 2.2 5.9 7.7 0.2 5.0 0.033 333 2.4 6.2 7.7 0.2 5.0 0.039 393 1.7 5.4 7.7 0.2 5.0 0.047 473 1.9 5.6 7.7 0.2 5.0 0.056 563 2.1 5.8 7.7 0.2 5.0 0.068 683 2.3 6.2 7.7 0.2 5.0 0.082 823 2.8 6.0 7.7 0.2 5.0 0.10 104 3.0 6.2 7.7 0.2 5.0 0.12 124 2.9 6.2 7.7 0.2 5.0 0.15 154 3.3 6.6 7.7 0.2 5.0 0.18 184 2.8 6.6 10.2 0.2 7.5 0.22 224 3.1 7.2 10.2 0.2 7.5 Product symbol : (Example) MMX-EC Series 100V.DC 0.22mF ±10% MMX-EC- 2A- 224 K T F Type of series For MMX-EC type taping, see page 215. Lead free terminal code Packing method code Capacitance tolerance code Capacitance code Rated voltage code 62

MEMO 63

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MML-E Series (For SMD Metallized Polyphenylene Sulfide Film Capacitor) Caseless high-performance and high-reliability film capacitor thro-ugh improvement of solderability Use of a specific terminal construction provides high resistance to skewness and falling after board mounting, and to stress at board division. Suitable for the inverter power supply (50 Hz to 100 khz)for back light in portable type PC, word processor, car navigation system, liquid crystal TV, touch panel, etc. Film capacitor for surface mounting with a small tan δ value and excellent temperature characteristics. Product Specifications Item Specifications Temperature Range -40 ~+105 (+125, with derating over 105 ) Rated voltage 100, 250V.DC Capacitance tolerance ±5%(J), ±10%(K) Dissipation factor 0.15% or less (20, 1 khz) Withstanding voltage Rated voltage (V.DC) 1.5 for one min Insulation resistance 15,000 M or more Solder heat resistance Reflow : Peak 240 for 5 sec. or less (Capacitor surface) For soldering conditions for SMD capacitors, refer to page 206 and 207. Outline of drawings and dimensions Marking Product symbol: (Example) MML-E Series 100 V.DC 0.22mF±10% H 0.3 b MIN L 0.2 a 0.2 d MAX C 0.2 W 0.4 MML-E- 2A- 224 K T F Type of series Lead free terminal code Packing method code Capacitance tolerance code Capacitance code Rated voltage code For taping of the MML-E type, refer to page 215. Standard value and case size Capacitance μf Code 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 (Unit : mm) Rated voltage (code) 100V.DC / 63V.AC (2A) 250V.DC / 80V.AC (2E) H W L a b c d H W L a b c d 2.5 5.4 7.9 1.2 4.8 4.3 0.3 2.5 5.4 7.9 1.2 4.8 4.3 0.3 2.5 5.5 7.9 1.2 4.8 4.3 0.3 2.5 5.5 7.9 1.2 4.8 4.3 0.3 2.5 5.4 7.9 1.2 4.8 4.3 0.3 2.5 5.4 7.9 1.2 4.8 4.3 0.3 2.5 5.5 7.9 1.2 4.8 4.3 0.3 2.5 5.5 7.9 1.2 4.8 4.3 0.3 2.5 5.5 7.9 1.2 4.8 4.3 0.3 2.5 5.5 7.9 1.2 4.8 4.3 0.3 2.5 5.7 7.9 1.2 4.8 4.3 0.3 2.5 5.7 7.9 1.2 4.8 4.3 0.3 2.5 5.5 7.9 1.2 4.8 4.3 0.3 3.0 6.0 7.9 1.2 4.8 4.3 0.3 2.5 5.7 7.9 1.2 4.8 4.3 0.3 3.0 6.2 7.9 1.2 4.8 4.3 0.3 2.5 5.4 7.9 1.2 4.8 4.3 0.3 3.3 6.6 7.9 1.2 4.8 4.3 0.3 2.5 5.6 7.9 1.2 4.8 4.3 0.3 3.3 7.0 7.9 1.2 4.8 4.3 0.3 2.5 5.8 7.9 1.2 4.8 4.3 0.3 3.3 6.6 10.4 1.2 7.3 4.3 0.3 3.0 5.9 7.9 1.2 4.8 4.3 0.3 3.3 6.9 10.4 1.2 7.3 4.3 0.3 3.0 6.1 7.9 1.2 4.8 4.3 0.3 4.0 7.4 10.4 1.2 7.3 4.3 0.3 3.0 6.1 7.9 1.2 4.8 4.3 0.3 3.3 6.5 7.9 1.2 4.8 4.3 0.3 3.0 6.5 10.4 1.2 7.3 4.3 0.3 3.3 7.0 10.4 1.2 7.3 4.3 0.3 *For ratings that are not described in the table, ask us for further information. 64

GENERAL ELECTRONIC EQUIPMENT USE PLASTIC FILM CAPACITORS MML-F Series (For SMD Metallized Polyester Film Capacitors) High-voltage capacitors applying the case-less type technology for Model MML-E and using polyester film Suited for SSRs and other power circuits requiring high voltage (products for voltage rating 630V. DC) Voltage ratings 630V. DC Product specifications Item Temperature Range Rated voltage Permissible capacitance Dielectric dissipation factor Withstand voltage Insulation resistance Resistance to solder heat Specification -40 ~+85 (+105, with derating over 85 ) 630V.DC ±5% (J), ±10% (K) 0.7% or less (20, 1kHz) Rated voltage (V.DC) 1.5, one min. 15,000 M or more Reflow : peak 220, 5 seconds or less (Capacitor surface) For soldering conditions for SMD capacitors, refer to page 206 and 207. Outline of drawings and dimensions Marking Product symbol : (Example) MML-F Series 630V DC 0.022mF±10% H 0.3 b MIN L 0.2 a 0.2 d MAX C 0.2 W 0.4 MML-F- 2J- 223 K T F Type of series For the taping of Model MML-F, see page 215. Lead free terminal code Packing method code Capacitance tolerance code Capacitance code Rated voltage code Standard value and case size Voltage rating Capacitance Dimensions (V.DC) (μf) Code H W L a b c d 630 0.010 2J-103 2.5 5.4 10.4 1.2 7.3 4.3 0.3 630 0.015 2J-153 3.5 6.2 10.4 1.2 7.3 4.3 0.3 630 0.022 2J-223 3.5 7.0 10.4 1.2 7.3 4.3 0.3 630 0.033 2J-333 4.5 7.8 10.4 1.2 7.3 4.3 0.3 For ratings not covered in the table, consult Hitachi AIC. (Unit : mm) 65

MEMO 66

AIC Europe GmbH Adolf-Dembach-Str.12 D-47829 Krefeld / Germany E-Mail: info@aic-europe.com Phone: +49 2151 4943-5 Fax: +49 2151 4943-80 www.aic-europe.com