VSERIES VSeries Bridgeport V320 5F Bridgeport V480 Bridgeport V480 APC Bridgeport V710 Bridgeport V1000 800-843-8801 WWW.HARDINGE.COM
Bridgeport V Series machines have an exceptional combination of features for speed, power, accuracy and durability in a compact design and affordable price. They are rigid and reliable machines consisting of a robust, one-piece cast iron base, heavy-duty linear guideways and ballscrews, and many value-added standard features like: heavy-duty dual-wound spindle motor 40-psi coolant supplied through circular flushing ring at spindle face chip conveyor interface swing-out CNC control panel Choose from the numerous productivity options and you ll have a truly versatile machine with the level of quality you would expect with any Bridgeport product. 2
forging die size hardness feed rate 300mm x 145mm 51 HRC 5000mm/min 3
BRIDGEPORT V320 5F The Bridgeport V320 5F vertical machining centers are designed for accuracy, speed and productivity. They are built to provide years of dependable machining on parts requiring consistent tolerances, tough to machine materials and fine surface finishes. X-axis 20 (510mm) A-axis +30 ~ -120 y-axis 24 (610mm) machine travel z-axis 20 (510mm) C-axis 360 (cont.) features 4+1 machining center with simultaneous 4-axis operation 12.60 (320mm) diameter table Stable & rigid structure Powerful dual wound spindle Mitsubishi M8 control 10K, 12K, 15K RPM direct drive spindle BIG-PLUS spindle 30 tool servo driven ATC 2 axis trunnion table diameter: 12.60 (320 mm) Axis (Tilt )+30 ~ -120 ; C-axis (Rotary) 360 Table max. swing diameter: 16.02 (400mm) Auto power off 1000 PSI TSC prep Manual chip wash gun Circular flushing Coolant chip flush system Air blast Central grease lube LED status lamp machine options 12,000 RPM - air/oil lube, direct coupled, BIG PLUS spindle, hollow shaft motor, spindle chiller * 15,000 RPM - air/oil lube, direct coupled, BIG PLUS spindle, hollow shaft motor, spindle chiller * Spindle chiller (optional for 10,000 RPM spindle, standard for 12,000 and 15,000 Chip conveyor hinge type (interface included as standard equipment) * 280 PSI coolant through spindle Chip conveyor scraper type (interface included as standard equipment) * Additional spare M codes (8 set) External high voltage transformer, 25KVA, 380-440V, 50/60HZ * X/Y/Z axis auto greased lubrication in lieu of manual greased lubrication * Air thru spindle 87 P.S.I (6 bar) * Heidenhain optical linear scales X/Y/Z * Sliding door for 30-tool ATC (magazine, auto door) * A-axis rotary encoder * Probing package Renishaw wireless probe combo Probe prewiring Servo driven auto door with light curtain * * Factory order only 4
V320 5F MACHINE CONSTRUCTION Machine Structure Strategically ribbed base, column, and spindle carrier for increased rigidity and stiffness during demanding machining applications. Robust 45mm, 12mm pitch, doublenut ball-screws are featured in the X, Y and Z-axis. The fixed, pre-tensioned ball-screw design minimizes thermal growth, enhances rigidity, stability, and precision of the machine. Machine structure features 19 precision hand scraped joints for maximum stiffness Machine Base Designed using FEA (Finite Element Analysis) techniques to provide superior machining performance Highly-rigid base with optimum dynamic stability The iron structure weighs 10,498lbs (4,762kg) 5
KEY FEATURES V320 5F One key feature is the integrated 2-axis trunnion rotary table with 4-axis simultaneous motion and one positioning axis giving you the ability to machine a part on five different faces. This configuration greatly reduces cycle time and eliminates multiple set-ups when compared to a 3-axis machine. The machining methods is similar to 3-axis machining but with the addition of a 2-axis trunnion rotary table you can simply machine up to five different sides (or faces) in one set-up making this machines efficiency much higher that a 3-axis machine. tilt axis specification tilt rotary Table 4-axis simultaneous motion, one positioning Table diameter size: 12.60 (320mm) Max. work piece diameter 16.02 x 12.60 (400mm x 320mm) Tilting degree (A degree): +30 ~ -120 C-axis rotation: 360 Load capacity: Vertical 220.46lbs (100kg) Horizontal 330.69lbs (150kg) Clamping torque: A-axis: 140 kg-m C-axis: 70 kg-m T slots-0.47 (12mm) x 4 Tool center point A key control function that continuously keeps track of the tool center point during all axis interpolation 6
V320 5F KEY FEATURES Large Capacity, fast performance automatic tool changers The 30 tool servo driven ATC provides 1.9 seconds (tool to tool) change time. The servo driven ATC also allows fast recovery after an interrupted tool change cycle. Max. tool diameter Full drum: 2.95 (75mm) Max. tool diameter (Adj. pockets empty) 5.91 (150mm) Max. tool length 11.81 (300mm) Max. tool weight 15.43lbs. (7kg) Standard ATC is 30 tool (max.) Tool change time: Tool to tool 1.9 sec. Chip to chip 4.0 sec. Direct drive spindle The standard 40 taper, 10,000-rpm grease lubricated spindle is a performance enhancement over belted spindles. Direct drive spindles provide faster Acc/Dec over belted spindles. 0 to 12,000 rpm is 2.6 sec 12,000 to 0 rpm is 3.1 sec The standard hollow shaft spindle motor allows easy installation of the CTS Contentious torque rating is 75.2 ft-lb (102 Nm) at 1400-rpm base speed Optional 12,000 rpm air/oil spindle Optional 15,000 rpm air/oil spindle Optional spindle chiller standard ISO-40 Dual Contact Taper Spindle BIG-PLUS Dual Contact Spindle Provides a stiffer interface between the spindle and the tool holder providing higher rigidity, stiffness, and accuracy when performing high-speed and difficult to machine applications. Tool retention force is 1,984-lbf/8,820N/900kgf for aggressive cutting applications. 7
CONTROLS Bridgeport v320 5f Mitsubishi Spindle Motor 10,000 RPM Power & Torque Characteristic Curve Mitsubishi M80 Type A 10.4 Color LCD Display with Full Keyboard Inch/Metric Data Selection by G-Code 1280 Meters Part Program Storage Part Program Storage USB or Compact Flash Data Input/output - USB or Compact Flash MDI (Manual Data Input) Operation Reader/Punch Interface RS232 Compact Flash Card Ethernet interface (Data Transfer Capability) 8
V320 5F SPECIFICATIONS AXIS TRAVEL Table (X-axis) 20.08 (510mm) Saddle (Y-axis) 24.01 (610mm) +/- 305mm Head (Z-axis) 20.08 (510mm) A-Axis (tilt) +30 ~-120 C-Axis (rotary) 360 (continuous) Max Swing diameter 16.02 (407mm) POSITIONING X, Y, Z-Axis Positioning, Full Travel.00019 in (0.005mm) (ISO 230-2) (with scale) X, Y, Z-Axis Repeatability.000118 in (0.003mm) (ISO 230-2) (with scale) X, Y, Z-Axis Positioning, Full Travel.00031 in (0.008mm) (ISO 230-2) (w/o scale) X, Y, Z-Axis Repeatability.000157 in (0.004mm) (ISO 230-2) (w/o scale) A-Axis Positioning (Arc sec) with scale 12 A-Axis Positioning (Arc sec) w/o scale 20 C-Axis Positioning (Arc sec) with scale 12 C-Axis Positioning (Arc sec) w/o scale 20 A-Axis Repeatability (Arc sec) with scale 4 A-Axis Repeatability (Arc sec) w/o scale 8 C-Axis Repeatability (Arc sec) with scale 4 C-Axis Repeatability (Arc sec) w/o scale 6 SPINDLE Spindle Speed Range Direct Coupled 10,000 RPM standard 12,000 RPM optional 15,000 RPM optional Spindle Motor HP Rating (S1-30 mins.) High speed winding Max Torque at Motor Base Speed (S1-30 min.) 14/20, 20/24 (11/15 kw, 15/18.5 kw) 55/75 ft.lb (75/102Nm) Spindle Taper No. 40 (BBT 40) Tool Holder ISO 40 WORKTABLE Rotary Table Diameter 24.8 (630mm) Table load Vertical 220.46lbs (100kg) Horizontal 330.69lbs. (150kg) Number of T-Slots 4 T-Slot Size 0.47 (12mm) AUTOMATIC TOOL CHANGER Taper NO.40 Type Swing Arm Tool Type CT Tool Selection Bi-directional Tool Capacity 30 Tools Max. Tool Diameter (Full Drum) 3 (75mm) Max. Tool Diameter (Adj. Pockets Empty) 5.91 (150mm) Max. Tool Length 11.8 (300mm) Max. Tool Weight 15.43 lbs (7kg) Tool Change Time (T-T/C-C) 1.9/4 sec COOLANT Coolant tank capacity 105.6 US gallons Wash down Standard Wash gun Standard Stainless chip pan Standard MACHINE SIZE Height 144 (3663mm) Length 118 (3000mm) Depth 125 (3185mm) Machine weight 16,049 lbs (7280kg) SERVICE REQUIREMENTS Power Requirements* (FLA/Volts/Phase) 57/40/3 Air Requirements (L/min) 6 kg/cm2 * Other voltages require an external transformer 9
DO NOT remove when operating. FLOOR PLAN V320 5F 668 Z Travel: 510 front view top view 10 668
graphic electrode size 80mm x 55mm X 40mm diameter ratio 18:1 feed rate 2000mm/min 11
BRIDGEPORT V480 Bridgeport s high quality, highly specified Vertical Machining Center, the Bridgeport V480 is an extremely compact yet rugged machine; developed for applications that require speed as well as accuracy. A fully digital machine with a rapid traverse rate of 1,417 ipm X, Y and Z and acceleration rates of X: 6 m/sec² / Y: 4.6 m/sec² / Z: 3.75 m/sec² providing a fast and accurate response to all your machining needs. features CNC Control - Mitsubishi M70 Type A Control 10.4 Color LCD Display with Full Keyboard CT40 or BT40 - BIG-PLUS Manual Chip Wash Gun Auto Power Off Central Greased Pump (manual) LED-Work Light Fully interlocked machine guarding Prep for Through Spindle Coolant 280/1000 PSI Embedded Ethernet, Navi-Mill 10,000 RPM, direct coupled greased spindle Circular Flushing Ring Coolant chip flush system Hand Held Pulse Generator (MPG) Three Color Stack Light 20 Tool ATC On board PCMCIA memory card slot USB Port Circular Flushing Ring ATC Driven By Inverter Drive Spindle air purge Oversize Tool function (4) machine options 12,000 RPM - air /oil lube, direct coupled, BIG-PLUS spindle, hollow shaft motor, spindle chiller* 15,000 RPM - air /oil lube, direct coupled, BIG-PLUS spindle, hollow shaft motor, spindle chiller* CTS - Deublin Rotary Union Through spindle coolant 280 PSI* Air blast for dry cutting Chip conveyor hinge type (interface included as standard equipment)* Chip conveyor scraper type (interface included as standard equipment)* Additional spare M codes (8 Set) External high voltage transformer, 25KVA, 380-440V, 50/60HZ* X/Y/Z-axis auto greased lubrication in lieu of manual greased lubrication* * Factory order only 12
V480 MACHINE CONSTRUCTION machine structure Robust C-frame fixed column design Spindle carrier, column and base are manufactured from high-quality cast iron, contributing to overall rigidity and machining capabilities Low inertia coupling connect between ball screws and axial servo motor directly machine base Ground ball screw features low noise, low thermal growth and heavy duty transmission Two linear guideways on X axis and two guide blocks per guideway Y and Z axes feature two linear guideways with two heavy duty guide blocks per guideway 13
KEY FEATURES V480 BIG-PLUS dual contact spindle system The BIG-PLUS spindle system assures higher rigidity, stiffness and accuracy of tool holders in high-speed and difficult machining applications. The dual contact precisely positions the toolholder within one micron following a tool change. Hardinge Rotary Solutions Hardinge Rotary Systems can be integrated into the VSeries machines, operating in a fully interpolated fashion with the other axes of the machine. The machining center must be configured for immediate or future 4th-axis operation. Refer to brochure 2372 for a complete rotary product offering with dimensions and specifications. Large Capacity, fast performance automatic tool changers The V480 have a fast tool change time of 1.5 seconds (tool-tool). The design of random bi-directional ATCs and cam type mechanism features an accurate, rapid and stable tool change system. The 90 degree tool pocket prevents tool dropping. All ATC s feature random-access, bi-directional indexing. 14
V480 SPECIFICATIONS AXIS TRAVEL Table (X axis) 18.9 (480mm) Saddle (Y axis) 15.75 (400mm) Head (Z axis) 16.93 (430mm) POSITIONING Auto Mode (X and Y axes) 1,417 in/min Auto Mode (Z axis) 1,417 in/min. Feedrate Range (X, Y, Z axes) 0.1-472 in/min. Minimum Programmable Res. 0.0001 (0.001mm) Ball Screw Diameter and Pitch 1.26 x. 472 (32 x 12mm) (X, Y, Z) SPINDLE Spindle Speed Range 10,000 rpm Spindle Motor HP Rating 7.5/10 hp (5.5/7.5) (CT/30 min) Spindle Torque (15 Min) 35 ft. /lbs base speed at 1500RPM Retention Force 1433 lbs Spindle Taper No. 40 WORKTABLE Working surface 23.6 x 15.8 (600 x 400mm) Table load 661lbs. (300 kg) Number of T-Slots 3 on 4.92 (125mm) centers T-Slot Size.551 (14mm) SWING ARM STYLE ATC Type of tool shank BT40 or CT40 taper Magazine capacity 20 Tools Tool Select by Shortest Path Bi-Directional and Random Select Maximum tool diameter 2.95 (80mm) (Full Drum) Maximum tool diameter 5.9 (150mm) (Adjacent Pockets empty) Maximum Tool Length 7.48 (190mm) Maximum Tool Weight 15.7 lbs. (7kg) Random Tool change time 1.5/3.8 sec. (tool to tool/chip to chip) COOLANT Coolant tank capacity 44.9 US gallons (170L) ACCURACY Positioning +/- 0.00039 in. (+/- 0.01mm) Repeatability +/- 0.000196 in. (+/- 0.005mm) MACHINE SIZE Height 101.26 (2572mm) Floor space (L x W) 106.96 x 104.69 (2716 x 2659mm) Weight 8378 lbs (3,800 kg) SERVICE REQUIREMENTS Electrical Supply (Input) Structure Balanced 3-phase Cycles 60 Hz Power 65FLA Voltage* 230 volt Compressed Air (Pressure Flow) 70 PSI Nozzle Coolant 10.5gal/min * Note: Other voltages require an external transformer 15
CONTROLS Mitsubishi M70 10.4 Color LCD Display with Full Keyboard Inch/Metric Data Selection by G-Code 1280 Meters Part Program Storage Part Program Storage USB or Compact Flash Data Input/output - USB or Compact Flash MDI (Manual Data Input) Operation Reader/Punch Interface RS232 Compact Flash Card Ethernet interface (Data Transfer Capability) Power and Torque Characteristic Curve V480 (#40 taper) 10,000 RPM V480 (#30 taper) 15,000 RPM 16
FLOOR PLANS V480 17
p20 cavity size 300mm x 145mm hardness 51 HRC feed rate 5000mm/min 18
BRIDGEPORT V710 Bridgeport s high quality, highly specified Vertical Machining Center, the Bridgeport V710 is a lightening quick extremely compact yet rugged machine; developed for applications that require speed as well as accuracy. The V710 is manufactured from quality sourced grey cast iron to the highest standards and possesses a level of reliability unsurpassed in the industry. A fully digital machine with a rapid traverse rate of 1,417 ipm X, Y and Z providing a fast and accurate response to all your machining needs. features CNC Control - Mitsubishi M70 Type A Control 10.4 Color LCD Display with Full Keyboard CT40 or BT40 - BIG-PLUS Manual Chip Wash Gun Auto Power Off Central Greased Pump (manual) LED-Work Light Fully interlocked machine guarding Prep for Through Spindle Coolant 280/1000 PSI Embedded Ethernet, Navi-Mill 10,000 RPM, direct coupled greased spindle Circular Flushing Ring Coolant chip flush system Hand Held Pulse Generator (MPG) Three Color Stack Light 20 Tool ATC On board PCMCIA memory card slot USB Port Circular Flushing Ring ATC Driven By Inverter Drive Spindle air purge Oversize Tool function (4) machine options 12,000 RPM - air /oil lube, direct coupled, BIG-PLUS spindle, hollow shaft motor, spindle chiller* 15,000 RPM - air /oil lube, direct coupled, BIG-PLUS spindle, hollow shaft motor, spindle chiller* CTS - Deublin Rotary Union Through spindle coolant 280 PSI* Air blast for dry cutting Chip conveyor hinge type (interface included as standard equipment)* Chip conveyor scraper type (interface included as standard equipment)* Additional spare M codes (8 Set) External high voltage transformer, 25KVA, 380-440V, 50/60HZ* X/Y/Z-axis auto greased lubrication in lieu of manual greased lubrication* * Factory order only 19
MACHINE CONSTRUCTION V710 machine structure Robust C-frame fixed column design Spindle carrier, column and base are manufactured from high-quality cast iron, contributing to overall rigidity and machining capabilities Low inertia coupling connect between ball screws and axial servo motor directly machine base Ground ball screw features low noise, low thermal growth and heavy duty transmission Two linear guideways on X axis and two guide blocks per guideway Y and Z axes feature two linear guideways with two heavy duty guide blocks per guideway 20
V710 KEY FEATURES BIG-PLUS dual contact spindle system The BIG-PLUS spindle system assures higher rigidity, stiffness and accuracy of tool holders in high-speed and difficult machining applications. The dual contact precisely positions the toolholder within one micron following a tool change. Hardinge Rotary Solutions Hardinge Rotary Systems can be integrated into the VSeries machines, operating in a fully interpolated fashion with the other axes of the machine. The machining center must be configured for immediate or future 4th-axis operation. Refer to brochure 2372 for a complete rotary product offering with dimensions and specifications. Large Capacity, fast performance automatic tool changers The V710 have a fast tool change time of 1.5 seconds (tool-tool). The design of random bi-directional ATCs and cam type mechanism features an accurate, rapid and stable tool change system. The 90 degree tool pocket prevents tool dropping. All ATC s feature random-access, bi-directional indexing. 21
SPECIFICATIONS V710 AXIS TRAVEL Table (X axis) 27.95 (710mm) Saddle (Y axis) 15.75 (400mm) Head (Z axis) 16.93 (430mm) POSITIONING Auto Mode (X and Y axes) 1,417 in/min Auto Mode (Z axis) 1,417 in/min. Feedrate Range (X, Y, Z axes) 0.1-472 in/min. Minimum Programmable Res. 0.0001 (0.001mm) Ball Screw Diameter and Pitch 1.26 x.472 (32 x 12mm) (X, Y, Z) SPINDLE Spindle Speed Range 10,000 rpm Spindle Motor HP Rating 7.5/10 hp (5.5/7.5) (CT/30 min) Spindle Torque (15 Min) 35 ft. /lbs base speed at 1500RPM Retention Force 1433 lbs Spindle Taper No. 40 WORKTABLE Working surface 31.4 x 15.7 (800 x 400mm) Table load 661lbs. (300 kg) Number of T-Slots 3 on 4.92 (125mm) centers T-Slot Size.551 (14mm) SWING ARM STYLE ATC Type of tool shank BT40 or CT40 taper Magazine capacity 20 Tools Tool Select by Shortest Path Bi-Directional and Random Select Maximum tool diameter 2.95 (80mm) (Full Drum) Maximum tool diameter 5.9 (150mm) (Adjacent Pockets Empty) Maximum Tool Length 7.48 (190mm) Maximum Tool Weight 15.7 lbs. (7kg) Random Tool change time 1.5/3.8 sec. (tool to tool/chip to chip) COOLANT Coolant tank capacity 44.9 US gallons (170L) ACCURACY Positioning +/- 0.00039 in. (+/- 0.01mm) Repeatability +/- 0.000196 in. (+/- 0.005mm) MACHINE SIZE Height 101.26 (2572mm) Floor space (L x W) 111.3 x 104.69 (2827 x 2659mm) Weight 8613 lbs (3,907 kg) SERVICE REQUIREMENTS Electrical Supply (Input) Structure Balanced 3-phase Cycles 60 Hz Power 65FLA Voltage* 230 volt Compressed Air (Pressure Flow) 70 PSI Nozzle Coolant 10.5gal/min * Note: Other voltages require an external transformer 22
V710 FLOOR PLANS 23
graphic electrode size 80mm x 55mm X 40mm diameter ratio 18:1 feed rate 2000mm/min 24
BRIDGEPORT V1000 Manufactured to the highest industry standards, the Bridgeport V1000 is packed with features to meet and exceed the requirements of the demanding metal-cutting market. features Side access doors with windows Leveling pads and screws Manual central grease lubrication (X/Y/Z axes) Dual work light Adjustible work light Three color stack light Retention knobs Spindle taper cleaner by air blast Inverter drive for atc Tool kit Remote MPG Ethernet connection & USB port Surround spindle circulating flush Coolant chip flush Manual coolant wash gun Auto power off Through spindle coolant prep machine options 12,000/15,000 RPM spindle w/air-oil mist* 4th axis pre-wiring 4th axis drive package 5th axis drive package (4+1) Spare M-Codes (8) Part/tool probe (wireless) (OMP 40-2 + OTS with OMI-2T) Linear optical scale (X/Y/Z Axes)* Column riser: 6 (150 mm)* Cutter air blast (spindle side) Chip conveyor: hinge type/scraper type Coolant through spindle, 280 PSI or 1000 PSI Tool magazine autodoor Automatic central grease lubrication (X/Y/Z Axes) Spindle oil chiller (std. 12/15K spindle) * Factory order only 25
MACHINE CONSTRUCTION V1000 machine structure The ATC mount is designed to properly support the ATC s weight by putting the force directly into the column for superior stability, rigidity and minimized vibration to the cutting zone The Z & Y-axis utilizes 45mm ballguides. The Z-axis features three trucks per guideway and the Y-axis, two trucks per guideway. The X-axis features two 35mm ball-guides with two trucks per guideway This heavy duty guideway system ensures a very stiff, rigid and durable machine providing years of low maintenance, high accuracy and superior surface finishes Robust class fixed pre-tensioned 45mm, 16mm pitch, double-nut ballscrews are featured in the X, Y and 12mm pitch in Z-axis Each axis features five bearing supports per ballscrew. Three bearings/set at motor side and two bearings/set at ball screw end side machine base Robust C-frame fixed column design from the popular XR machine family Strategically ribbed base, column, and spindle carrier for increased rigidity and stiffness during demanding machining applications For improved overall stiffness and rigidity, there are 17 hand scraped locations of column and base joint 26
V1000 KEY FEATURES BIG-PLUS dual contact spindle system The BIG-PLUS spindle system assures higher rigidity, stiffness and accuracy of tool holders in high-speed and difficult machining applications. The dual contact precisely positions the toolholder within one micron following a tool change. Hardinge Rotary Solutions Hardinge Rotary Systems can be integrated into the VSeries machines, operating in a fully interpolated fashion with the other axes of the machine. The machining center must be configured for immediate or future 4th-axis operation. Refer to brochure 2372 for a complete rotary product offering with dimensions and specifications. Large Capacity, fast performance automatic tool changers The V1000 has a fast tool change time of 2.5 seconds (tool-tool). The design of random inverter drive bi-directional ATCs and cam type mechanism features accurate, rapid and stable tool change system. 90 degree tool pocket prevents tool dropping. To ensure smooth and vibrationfree tool changing, the tool changer is strategically located for minimal transfer of vibration to the main casting. The ATC also features random-access, bi-directional indexing. Machine lubrication The V1000 utilizes manual centralized grease lubrication for all ballscrews and linear guides for extended component life. Optional auto grease lubrication is also available. Manual lubrication unit Auto lubrication unit optional 27
CONTROLS Mitsubishi M70 & M80 Type A 10.4 Color LCD Display with Full Keyboard Inch/Metric Data Selection by G-Code 1280 Meters Part Program Storage Part Program Storage USB or Compact Flash Data Input/output - USB or Compact Flash MDI (Manual Data Input) Operation Reader/Punch Interface RS232 Compact Flash Card Ethernet interface (Data Transfer Capability) bridgeport v1000 Mitsubishi Spindle Motor 10,000 RPM Power & Torque Characteristic Curve 28
V1000 SPECIFICATIONS AXIS TRAVEL Table (X-axis) 40.16 (1020mm) Saddle (Y-axis) 24 (610mm) Head (Z-axis) 24 (610mm) Gage Line Height (Min-Max) 3.9-27.95 (100-710mm) Y-Axis Throat Distance 24.72 (628mm) POSITIONING Auto Mode (X and Y axes) 1,692 in./min. Auto Mode (Z-axis) 1,417 in./min. Manual Mode 0-354 in./min. Ball Screw Diameter and Pitch(X, Y) 1.77 x 0.6299 Ball Screw Diameter and Pitch (Z) 1.77 x 0.4724 Axes Thrust X, Y, Z 939 / 939 / 2580 ft-lbs SPINDLE Spindle type Direct Drive Spindle Speed Range 10,000 rpm Spindle Motor HP Rating Mitsubishi 20 / 25 / 29.5 hp Spindle Torque 10,000 RPM 110.6 ft/lbs (148 Nm) Retention Force 1,984 ft-lbs. (2689 Nm) Tool Holder CT40 or BT40 Distance from table surface to 3.9-27.95 (min.-max.) spindle gauge plane WORKTABLE Working surface 47.2 in X 23.6 in. (1200 x 600mm) Table load 2000lbs. (900 kg) Number of T-Slots 5 T-Slot Size.708 (18 mm) Coolant Coolant tank capacity 105 US gallons (400L) Flood Coolant 34 gal/min @ 21.33 psi ACCURACY Positioning +/- 0.0004 in. (+/- 0.01mm) Repeatability +/- 0.0002 in. (+/- 0.005mm) AUTOMATIC TOOL CHANGER (ATC) Taper (ISO No.) 40 Type Swing Arm Tool Holder Type: BIG-PLUS BT or CAT or ANSI or DIN (SK) Pull Stud Type BT or BT modified BT for CAT & ANSI 2. DIN" Tool Selection Random Bi-directional Tool Capacity 30 Maximum Tool Diameter 3.15 (75mm) (Full Drum) Max. Tool Diameter 5.9 (150mm) (Adjacent Pockets Empty) Maximum Tool Length 11.81 (300mm) Maximum Tool Weight 15 lbs. (7 kg) Tool Change Time (T-T/C-C) 2.5/4 sec ATC Transmission encoder feedback inverter drive ATC motor/cam GENERAL SPECIFICATIONS Machine Weight 15,400Ibs/7000kg Machine Width 105 (2673mm) Chip conveyor not included Machine Height 120 (3048mm) Machine Depth 112 (2850mm) Coolant Tank Capacity (Liters) 105 GAL /400L Minimum Air Requirements 80 PSI (5.5 kg/cm 2 ) SERVICE REQUIREMENTS Power Requirements* (FLA/Volts/Phase) 79/220/3 * Other voltages require an external transformer 29
DO NOT remove when operating. FLOOR PLAN V1000 668 Z Travel: 510 front view top view 30 668
earpiece mould diameter hardness feed rate 6mm 50 HRC 2200mm/min 31
The Hardinge Group Companies Worldwide Hardinge Inc. is a leading international provider of advanced metal-cutting solutions. We provide a full spectrum of highly reliable CNC turning, milling, and grinding machines as well as technologically advanced workholding accessories. The diverse products we offer enable us to support a variety of market applications in industries including aerospace, agricultural, automotive, construction, consumer products, defense, energy, medical, technology, transportation and more. We ve developed a strong global presence with manufacturing operations in North America, Europe, and Asia. Hardinge applies its engineering and applications expertise to provide your company with the right machine tool solution and support every time. North America Hardinge Inc. One Hardinge Drive Elmira, NY 14902-1507 USA General Information: 607-734-2281 Sales Fax: 607.734.8819 Workholding Fax: 607.734.3886 Service: 800.424.2440 e-mail: info@hardinge.com www.hardinge.com Canada Canadian Hardinge Machine Tools Ltd. Phone: 800.468.5946 Fax: 607.734.8819 China Hardinge Machine (Shanghai) Co. Ltd. Hardinge China Limited No.1388 East Kang Qiao Road Pudong, Shanghai 201319 Phone : 0086 21 38108686 Fax: 0086 21 38108681 Germany Hardinge GmbH Europark Fichtenhain A 13c 47807 Krefeld Phone: (49) 21 51 / 49 64 90 Fax: (49) 21 51 / 49 64 99 9 e-mail: info@hardinge-gmbh.de www.hartdrehen.com All specifications subject to change without notice. All marks indicated by and are trademarks of their respective owners. #1513F Bridgeport Litho in USA Hardinge Inc. 2017 November 2017 Taiwan Hardinge Machine Tools B.V. 4 Tzu Chiang 3rd Road Nan Tou City 540 Taiwan, R.O.C. Phone: 886 49 2260536 Fax: 886 49 2252203 e-mail: cs@hardinge.com.tw Switzerland L. Kellenberger & Co. AG Heiligkreuzstrasse 28 Postfach CH-9008 St. Gallen Switzerland Phone: +41 (0) 71 242 91 11 Fax: +41 (0) 71 242 92 22 e-mail: info@kellenberger.net www.kellenberger.com L. Kellenberger & Co. AG Längfeldweg 107 CH-2500 Biel-Bienne 8 Switzerland Phone: +41 (0)32 344 11 52 Fax: +41 (0)32 341 13 93 e-mail: info@kellenberger.net www.kellenberger.com United Kingdom Jones & Shipman Precision Hardinge Ltd. Murrayfield Road Leicester LE3 1UW, UK Phone: +44 (0) 116 2013000 Fax: +44 (0) 116 2013001 e-mail: info@jonesshipman.com www.jonesshipman.com e-mail: sales@hardinge.co.uk www.hardinge.co.uk 32