Segatrici. saw machine. Smerigliatrici. saw bench grinders. Elettroutensili. Utensili. Fumes aspirators, Aspiratori. Attrezzatura per.

POWER MACCHIE, TOOLS, ATTREZZI MACHIERY, E COMPOETI WORKSHOPPER EQUIPMETS OFFICIA Trapani machines Drilling pag page22- -55 0 0 Torni lamps for machine Lathes pag page56- -99 1 1 Segatrici Band saw machine pag page10 10- -16 14 2 2 Smerigliatrici Mitre saw bench grinders pag page16 14- -18 19 3 3 Elettroutensili Power tools pag page19 22- -40 44 4 4 Utensili Drill accessories pag page41 45- -57 57 5 5 Fumes aspirators, vacum cleaners Aspiratori pag page58 58- -63 65 6 6 Attrezzatura per officina equipments Workshop pag page64 65- -75 75 7 7 Elementi per il montaggiotools Clamping 8 8 pag page76 76- -107 107 Prodotti per imballaggio Packaging equipments 9 9 pag page108 108-116 -116.1

DRILLIG MACHIE PECK 18 ITEM: PECK18 - Spindle travel 90 mm. - Adjustable spindle depth mechanical device - Working surface of the table 240 x 240 mm - Table is raising by rack and pinion - Table and base with T-slots - Tilting table with incorporated sliding vice - Vice width of jaws 80 mm. - Column diameter 80 mm. - Clearance between centre spindle and column 200 mm. - Max. clearance between spindle and table 630 mm. - umber of spindle speeds o. 10 - Speed range Rpm 200-2800 - Motor power capacity Kw 0.55 - Electrical supply 380V 50Hz 3ph 038018 02 2.737,00 18/20 90 CM2 140 0380MAS 02 1.003,00 0380REF 02 525,00 0380VARI 02 1.290,00.2

DRILLIG MACHIE PECK 25 ITEM: PECK25 - Morse Taper attachment MT 3 - Adjustable spindle depth mechanical device - Table is raising by rack and pinion - Table and base with T-slots - Tilting table with incorporated sliding vice - Vice width of jaws 100 mm - Column diameter 100 mm - Clearance between centre spindle and column 250 mm - Max. clearance between spindle and table 620 mm - Max. clearance between spindle and base 1100 mm - umber of spindle speeds o. 10 - Speed range Rpm 135-1900 - Motor power capacity Kw. 0.75 - Eletrical supply 380V 50Hz 3ph 043825 02 3.166,00 25/28 110 CM3 230 0438MAS 02 1.003,00 0438REF 02 525,00 0438VARI 02 1.290,00.3

DRILLIG MACHIE PECK 30 ITEM: PECK30 - Drilling capacity 30/32 mm - Spindle travel 110 mm - Manual spindle feed - Spindle attachment MT 3 - Spindle motor power kw.1,1 - Distance from spindle center to column surface 280 mm - Distance from spindle to table 50 ~ 600 mm - Distance from spindle to base 1200 mm - Dimensions of the table 300 x 300 mm - Table is tilting and swivelling type with vice width of jaws 100 mm - umber of spindle speeds 14 - Spindle speed variation by V-belts and pulleys - Spindle speeds range rpm 35 ~ 1980 - Eletrical supply 380V 3ph. 50Hz - Approx. net weight Kg. 290 044230 02 4.164,00 30/32 110 CM3 290 0442MAS 02 1.003,00 0442REF 02 525,00 0442VARI 02 1.432,00.4

SESITIVE BECH DRILLS WITH 6 SPEEDS ITEM: 0360 Sensitive bench drill with the highest accuracy, mounted on high-speed ball bearings of the best brands. The ground steel bush pulley holder and spindle shaft holder as also the mechanic cast iron column are highly resistant. These features ensure long machine life. 6-speed drill (1500-3000 - 4000-5500 - 7000-10000). B10 spindle coupling, three-phase 2-pole motor - 2800 rpm, 0.25 HP. It is supplied with three- 02 0360-B10 1.680,00 60 115 SAFETY SHIELDS FOR DRILLS ITEM: 1040 Impact-proof transparent plastic shield. Chrome-plated attachment. 1040200 1040200M 1040300 1040300M 01 102,00 177,00 107,00 186,00 200 300 130 ATTACHMETS FOR SAFETY SHIELDS ITEM: 1010 Chrome-plated side attachment with lamp holder hole. 1010200500 10105501000 01 33,20 74,50 With micro-switch. Chrome-plated universal attachment. 1015200500 10155501000 01 121,00 139,00 SAFETY SHIELDS FOR LATHES ITEM: 1020 Impact-proof transparent plastic. 01 1020300 37,20 300 1020350 42,70 350 150 1020400 47,10 400 180 1020450 52,20 450 190 01 1020500 58,90 500 200 1020550 103,00 550 240 1020650 141,00 650 265 1020800 182,00 800 300 ITEM: 1025 Polycarbonate shield, steel structure with 30 mm Ø hole for attachment to the lathe. 1025300 1025400 1025500 1025600 01 138,00 142,00 150,00 155,00 300 400 500 600 240.5

SAFETY SHIELDS FOR GRIDIG WHEELS ITEM: 1035 Slotted bracket for quick mounting on any grinding wheel, friction joint for perfect positioning. Shield with the optical area made of replaceable impact-proof plastic and of glass. 1035115110 01 90,00 LED LAMPS FOR MACHIES ITEM: 1545 3 x 1 W light emitting diodes. Lamp without power supply feeder with 24 V Voltage, AC/DC. Power consumption of approx. 10 W with IP67 protection, protection class III. Switching system with switch control. Anodised aluminium body, black lamp with glass protector. Painted steel tube arms, deep black colour, joint with clutch. Special features: Flood with 40 emission angle. 1545003 02 344,00 COECTORS FOR MACH LED LAMPS ITEM: 1553 Connectors suitable for all the MACH LED lamps, box of 1 black piece. 1553004CO 1553005CO 02 26,00 26,00 5 60V M12 4A.6

LED LAMPS FOR MACHIES ITEM: 1550 1 x 5 W light emitting diode. Lamp without power supply feeder with 20-28V Voltage, DC. IP67 protection, protection class III. Switching system without control. Anodised aluminium body, anodised aluminium lamp body black colour with transparent screen. Fixing: Screw. 1550001 1553006STA 02 179,00 22,20 190 ITEM: 1551 2 x 5 W light emitting diode. Lamp without power supply feeder with 20-28V Voltage, DC. IP67 protection, protection class III. Switching system without control. Anodised aluminium body, anodised aluminium lamp body black colour with transparent screen cover. Fixing: Screw. 1551002 1553006STA 02 268,00 22,20 365 ITEM: 1552 3 x 5 W light emitting diode. Lamp without power supply feeder with 20-28V Voltage, DC. IP67 protection, protection class III. Switching system without control. Anodised aluminium body, anodised aluminium lamp body black colour with transparent screen cover. Fixing: Screw. 1552003 1553006STA 02 363,00 22,20 540.7

LATHE ECOCA TECHICAL CHARACTERISTICS - Height of centres: 230 mm - Swing over bed: 460 mm - Swing over cross slide: 258 mm - Swing over gap: 670 mm - Width of bed: 300 mm - Spindle bore: 58 mm - CAM-LOCK 6" - Taper of spindle bore: MT6 - of speed 12, range of single speed 20-2000 rpm - Cross slide travel 247 mm - Upper slide travel 132 m - Longitudinal feed range 0,05-0,82 mm - Cross feed range 0,02-0,4 mm - Inch threads 4-56 TPI - Metric threads P.0,5-P.7 - Main motor power 7,5 HP - Cooling system motor power 0,125 HP - Quill travel 1222227 mm - Quill taper CM4 - Overall dimension cm (LxWxH): L216 x W81 x H123 - Weight 1650/2000 Kg 14901500 02 17.500,00 ACCESSORIES (included) - Simple guide self-centering chuck (3+3 jaws for internal/external) - Plateau 4 indipendent jaws (diam. 320 mm) - Drive plate diam 400 - Fix rest and removable rest - Cooling system - Alogen Lamp - Lathe carriage safety guard - Tools box. Positioning stands. - ALGRA tool holder (B) DIGITAL READOUT - Layout 1/2-3 axis (n.2 display) - Green umeric and Alphanumeric display height 14 mm - Resolution: 0,01-0,005-0,002-0,001-0,0005 selectable from keyboard - Beam/diameter conversion - bidirectional counting - Dimensions setting through keyboard - Separate axis reset - Automatic research index pulse - Standby ignition test -.200 Abs absolute reading - Protected warehouse 200 tools - Incremental reading - Data end work automatic rescue - Data automatic rescue during power failure - Algebraic sum between axis (only 3-axis) - Mm/inch conversion - Linear error compensation - Calculation taper - Power supply: 110Vac-220vac +/-15% 1490VISU 02 1.990,00.8

LEVELIG MOUTS ITEM: 1300 Zinc plated steel base, anti-vibration sole in anti-oil and anti-slip rubber compound, removable threaded shank complete with two hexagonal nuts and two galvanised steel washers, preserves machine tools simple, fast and accurate positioning and levelling of machine tools. 01 D H 130080 27,88 80 M12 80 1300110 31,38 110 M14 125 32 1300140 34,45 140 M16 130 39 1300200 69,66 200 M20 62 ATI-VIBRATIO STADS ITEM: 1310 Zinc-plated steel base, anti-vibration sole in anti-oil and anti-slip rubber compound, with two stages of different density separated by a metal reinforcement. 01 D H 131080R 37,93 80 M12 80 400 1200 1310110R 43,63 110 M14 125 32 650 1900 1310140R 53,83 140 M16 130 39 900 2850 VIBRATIO-COTROL MOUTS ITEM: 1315 nut and 1 washer. Base and spindle not assembled. 01 D 1315080 41,00 80 H 100 1315120 52,32 120 45 120 1000 1315160 65,57 160 150 1500 1315200 139,86 200 55 160 4000 4.9

ITEM: SIP 130 Suitable for people who frequently move and are particularly careful to quality/price ratio. Aluminium structure, adjustable cutting angle ranging from 0 to 45, continuous cutting speed change, arc-shaped body frame locking device making the structure easy to transport. Overdimensioned piece locking vice made from cast iron and aluminium, with steel inserts, Base with non-scratch feet. IVERTER BADS SAWS MACHIE EASY CUT 02 22901335 406,00 230 0 45 105 105 60 20 Blade width 13 x 0.65 mm ITEM: SIP 140 Suitable for people who frequently move and are particularly careful to quality/price ratio. Aluminium structure, 1010 Watt, adjustable cutting angle ranging from 0 to 60, continuous cutting speed change, arc-shaped body frame locking device making the structure easy to transport. Piece locking vice made from cast iron and aluminium, with steel inserts, base with non-scratch feet. POWERFLEX M42 BLADE - A7012 A05 6/10 8/12 10/14 10 14 1335 16,83 10 IVERTER BADS SAWS MACHIE EASY CUT 02 22921440 524,00 230 0 45 60 125 85 50 120 80 50 Blade width 13 x 0.65 mm ITEM: SIP 170 Suitable for people who frequently move and are particularly careful to quality/price ratio. Aluminium structure, 2000 Watt, Adjustable cutting angle ranging from 0 to 60, continuous cutting speed change, arc-shaped body frame locking device making the structure easy to transport. Piece locking vice made from cast iron and aluminium, with steel inserts, base with non-scratch feet. POWERFLEX M42 BLADE - A7012 A05 6/10 8/12 10/14 10 14 1440 17,80 10 IVERTER BADS SAWS MACHIE 02 22941735 705,00 230 45 60 100 140 100 60 35 POWERFLEX M42 BLADE - A7013 Blade width 13 x 0.9 mm A05 6/10 8/12 10 14 20,57 10.10

COLUM FOR BADS SAWS MACHIE SIP 170 ITEM: 2295 02 229500 145,00 15 STAD FOR IVERTER BADS SAWS MACHIE SIP 130-140 - 170 ITEM: 2299 Foldable moving stand for portable band saw machines, can be positioned in three different highs. Can be to the operator. Wheels are equipped with brake, for maximum stability. 02 229900 125,00 50 10 ITEM: 3300 Supply voltage 230 V, single-phase motor with 0.37 kw power, cutting from 0-45 to the right. Sturdy and PORTABLE BAD SAWS 02 23001470 469,00 0 45 150 65 100 65 CUT-OFF BECH SAWS FOR PUCHES ITEM: 3310 of stainless steel, aluminium, brass, copper, nylon, etc. It leaves no burrs and does not alter the hardening treatment, 1HP/0.75 kw motor, three-phase supply voltage 380 V, on request available also with singlephase supply voltage 220 V for hobbyists. 150 x 1-1.5 mm Ø abrasive disc for high speeds, approximate rotation speed of 6000 rpm, swivel graduated vice for cuts up to 45. Low-voltage start micro-switch in the handle, wraparound casing for total protection of the abrasive disc. 02 Ø 2310150 795,00 6000.11

O-REIFORCED CUTTIG DISCS ITEM: G0405 Organic aluminum oxide binder. Treated and hardened steel. Dry operation on stationary machines. G04051501020 G04051501620 G01 8,40 10,50 25 MITRE SAW MACHIE LP 275 ITEM: 2315 - Movable head 45 right and left - Reduction unit in oil bath - Membrane pump for coolant - Vice complete with anti-burr device - Bar stop - Service tools - Instruction manual and spare parts - 24 V low voltage installation with hold-to-run head control knob - Overall dimensions: 830 x 900 x 1025 mm - Steel pedestal 2315275 02 1.391,00 98 BAD SAW MACHIE SIP 215 ITEM: 2325 - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Strong band guides with tight stress-raiser bearings - Vice with a device for quick lock handle - Cutting range 0-45 right - Adjustable stop for cuts of the same size - 24 V low tension plant - Overall dimensions: 1000 x 1155 x 1600 mm - 0,06 kw power-driven pump for band cooling 2325215 02 1.689,00 160.12

BAD SAW MACHIE SIP 280 ITEM: 2335 - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear and tempered and ground worm - Strong band guides with tight stress-raiser bearings and adjustable widia tips. - Band stretching is obtained by electro-mechanical blade tensioner with micro switch - Vice with a device for swift locking by excentric means handle, and on the blade - Cutting thickness 1,2 mm - Cutting range 0 to 60 right - Adjustable stop for cuts of the same size - 24 V low tension plant - 0,06 kw power-driven pump for band cooling 2335280 02 2.215,00 220 BAD SAW MACHIE SIP 280 ID ITEM: 2345 - Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Strong band guides with tight stress-raiser bearings and adjustable widia tips - Band stretching is obtained by electro-mechanical blade tensioner with microswitch - Vice with a device for swift locking by excentric means handle, and on the blade - Cutting thickness 1,2 mm - Cutting range 0 to 60 right - Adjustable stop for cuts of the same size - 24 V low tension plant - 0,06 kw power-driver pump for band cooling 2345280 02 2.524,00 230 215 150 85.13

BAD SAW MACHIE SIP 330 ID ITEM: 2355 - Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Strong band guides with tight stress-raiser bearings and adjustable widia tips - Band stretching is obtained by electro-mechanical blade tensioner with microswitch - Wide rotating material support table handle, and on the blade - Cutting thickness 1,2 mm - Cutting range 45 left 60 right - Adjustable stop for cuts of the same size - 24 V low tension plant 2355330 02 4.275,00 365 CIRCULAR MITRESAWS WITH BLADE Ø300 ITEM: 2270AL Professional machine for alluminium cutting. Powerful induction motor, upper table extra-rigid, shock absorber with pre tempered compression spring, couplings with bearing. On request, with blade for wood. 02 2270AL 718,00 230 3000 25 02 2270R1 88,00.14

CIRCULAR MITRESAWS WITH BLADE Ø315 ITEM: 2275LG Professional machine for wood cutting. Powerful induction motor, upper table extra-rigid, shock absorber with pre tempered compression spring, couplings with bearing. On request, with blade for alluminium. 02 2275LG 798,00 230 3600 0 25 02 2275R1 82,00 MAUAL CLAMP FOR SIP 30-31 ITEM: 2276 Manual clamp for SIP 30 and SIP 31 series. 02 227600 76,00 PORTABLE FOLDIG TABLE FOR SIP 30-31 ITEM: 2277 Portable folding table for SIP 30 and SIP 31. 02 227700 85,00 10.15

ITEM: 2280AL Professional machine for alluminium cutting. Powerful induction motor, the double shock absorber it lowers the blade holder head effortlessly, All movements with BEARIGS which give smoothness, rigidity and precision and are free of maintenance. CIRCULAR MITRESAWS FOR ALLUMIIUM WITH BLADE Ø350 02 2280AL 1.975,00 400 2 3000 0 54 02 2280R1 110,00 COLUM FOR MITRESAWS SIP 35 ITEM: 2282 02 228200 314,00 38 COLUM OF SUCTIO FOR MITRESAWS SIP 35 ITEM: 2283 Column complete of suction for SIP 35. 02 228300 704,00 48 BECH GRIDERS 230V ITEM: 3102 Industrial bench grinder Made in Italy, induction motor with thermal protection bimetallic that protects against overloads ensuring a virtually unlimited life of the grinder. Grinding wheel to be ordered separately. 02 3102150 152,00 8 2800 3102200 221,00 16 A1.16

BECH GRIDERS 400V ITEM: 3104 Industrial bench grinder Made in Italy, induction motor with thermal protection bimetallic that protects against overloads ensuring a virtually unlimited life of the grinder. Grinding wheel to be ordered separately. 02 3104150 252,00 11 A1 2800 3104200 329,00 1 A2 ITEM: 3106 Industrial combined bench grinder (GRIDIG WHEEL/BRUSH) Made in Italy, induction motor with thermal protection bimetallic that protects against overloads ensuring a virtually unlimited life of the grinder. Grinding wheel and brushes to be ordered separately. 02 3106150 199,00 COMBIED BECH GRIDERS 230V 2800 COMBIED BECH GRIDERS 400V ITEM: 3108 Industrial combined bench grinder (GRIDIG WHEEL/BRUSH) Made in Italy, induction motor with thermal protection bimetallic that protects against overloads ensuring a virtually unlimited life of the grinder. Grinding wheel and brushes to be ordered separately. 02 3108150 306,00 A1 2800 3108200 407,00 1 A2 COLUM FOR BECH GRIDERS ITEM: 3110 02 3110A1 140,00 A1 26 3110A2 174,00 A2 33 3110VR 10,34 ECOLOGICAL BECH GRIDERS 400V ITEM: 3116 Industrial bench grinder Made in Italy designed with a view to fully comply with workplace health and safety regulations, complete with column and integrated vacuum system. Grinding wheels to be ordered separately. 02 3116200 1.029,00 2800 1.17

COMBIED ECOLOGICAL BECH GRIDERS 400V ITEM: 3118 Industrial combined bench grinder (GRIDIG WHEEL/BRUSH) Made in Italy designed with a view to fully comply with workplace health and safety regulations, complete with column and integrated vacuum system. Grinding wheel and brushes to be ordered separately. 02 3118200 1.107,00 2800 1 GRIDIG WHEELS ITEM: G7200 Grinding wheels suitable for machining steels, ferrous material in general. Grey Colour. G720015036 G720015060 G720020036 G720020060 G01 33,00 33,00 47,00 47,00 BUSCHIG FOR GRIDIG ITEM: 3121 Plastic busching for grinding wheel bore. 31212012 31212013 31212016 31212520 01 0,50 0,50 0,50 0,50 31213025 31213220 31213225 31217876 01 0,50 0,50 0,52 1,00 PRECISIO GRIDIG WHEELS ITEM: 38A Aluminium oxide. Suitable for machining steels and HSS steels, ferrous material in general and hard bronze. Friable. Cold cutting. White colour. G72101502020 G72101502032 G72102002520 G72102002532 G01 39,35 39,35 64,38 64,38 4 OTES - Grinding wheels are complete with reducing sleeves where necessary WHEEL BRUSHES ITEM: G4905 High resistant crimped wire. For deburring, etching and polishing. K = multihole reduction kit 25-20-16 G01 D E C F G4905100/0 22,50 100 12 25 12 G4905150/1 16,20 150 20 32 38 G4905200/0 20,15 200 23 44.18

BOSCH TOOLS ICOS TABLE/CHART.19

CORDLESS REVERSIBLE DRIVERS 10,8V BATTERY ITEM: GSR 10.8-LI PROFESSIOAL Compact and powerful with Bosch Premium Lithium technology for exceptional battery life and unbeatable power, ECP (Electric Cell Protection) to protect the battery against overload, overheating and total discharge. o memory effect, the battery can be charged without damage regardless of the charge level, Bosch Hyper Charge quick charge. Motor brake for fast and accurate screwing, integrated LED for lighting the work area, ergonomic handle with Softgrip coating. 401010,8 03 219,00 2 1/4 10 19 30/13 20 1 2 lithium batteries 1.3 Ah Charger AL 1115 CV Case L-BOXX Dimensions: 143 x 178h mm ITEM: GWI 10.8 V-LI CORDLESS AGLED REVERSIBLE DRIVERS 10,8V BATTERY Premium Lithium technology for exceptional battery life and unbeatable power, ECP (Electric Cell Protection) to protect the battery against overload, overheating and total discharge. o memory effect, the battery can be charged without damage regardless of the charge level, Bosch Hyper Charge quick charge. Motor brake for fast and accurate screwing. Electronic setting of the tightening torque, ergonomic handle with Softgrip coating and practical hook. 401510,8AG 03 319,00 2 1/4 5 8 10 13/5 1 2 lithium batteries 1.3 Ah Charger AL 1130 CV Case L-Box Dimensions: 103 x 295 h mm CORDLESS AGLED DRILL/DRIVERS 10,8V BATTERY ITEM: GWB 10,8-LI AG PROFESSIOAL Very compact tool: adjustable and very compact head (only 11 cm) with 10 mm Auto-Lock chuck. Extremely versatile use, thanks to the 5-position adjustable head: 0 /22.5 /45 /67.5 /90. High rpm, from 0 to 1300 r/ min. for fast work progress - best used for drilling. Motor brake for precise screwing work. Practical 3-LED battery charge level indicator. Exclusive Bosch Premium Lithium technology for a 400% longer battery life and unbeatable operating time. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. Bosch Hyper Charge: thanks to rapid charging, the batteries are pre-charged to 75% after half of the total charging time. o memory effect: the battery can be recharged at any time regardless of the charge level without damaging the cells. 401610,8AG 03 305,00 11 6 10 2 batteries with 1.3 Ah Lithium Charger AL 1130 CV Case L-BOXX Insert for L-BOXX Dimensions: 12 x 29.4 h mm.20

CORDLESS DRILL/DRIVERS 10,8V BATTERY ITEM: GSR 10,8-2-LI PROFESSIOAL With its mere 169 mm, it has the most compact design in its class. The 2-speed gears ensures a powerful torque of 30 m for drilling (up to 19 mm) and for driving (up to 7 mm). Bosch Premium Lithium technology provides an 400%.longer battery life Bosch Electronic Cell Protection (ECP) protects the battery against overload, overheating and total discharge. Bosch Hyper Charge: thanks to rapid charging, the batteries are charged to 75% after only half of the total charging time. o memory effect: the battery can be recharged at any time regardless of the charge level without damaging the cells. Motor brake for fast and accurate screwing. 402010,8 03 246,00 1/10 10 19 30/13 2 Lithium Batteries 1.3 Ah Charger AL 1130 CV Insert for L-BOXX Case L-BOXX Dimensions: 169 x 178 h mm CORDLESS DRILL/DRIVERS 14,4V BATTERY ITEM: GSR 14,4-2-LI PROFESSIOAL Low weight: only 1.3 kg for perfect handling and low-fatigue operation. 2-speed planetary gears redesigned for greater power and versatility of use in driving and drilling work. Exclusive Bosch Premium Lithium technology for 400% longer charge that with Electronic Cell Protection (ECP) protects the battery against overload, overheating and total discharge. Integrated LED for work area lighting even in dark places. The practical belt clip attachment allows one to keep the tool always within reach. 40221440/LI 03 189,00 10 25 30/15 2 batteries with 1.5 Ah Lithium Charger AL 1820 CV Case Insert for L-BOXX Dimensions: 196 x 226 h mm.21

CORDLESS DRILL/DRIVERS 14,4V BATTERY ITEM: GSR 14,4 V-LI PROFESSIOAL Extremely compact thanks to the smallest design (only 185 mm) in its class; low weight (only 1.7 kg) for perfect handling. Bosch Premium Lithium technology: the only one if its kind ensuring as much as 400% longer battery life and unbeatable battery power. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. Integrated LED for work area lighting even in dark places. Motor brake for fast and accurate screwing. Ergonomic handle with reduced size and with Softgrip coating for effortless work. 402514,4 03 445,00 1/2 60/25 13 32 2 x 3.0 Ah Lithium Charger AL 1860 CV Case L-BOXX Insert for L-BOXX Dimensions: 185 x 227 h mm ITEM: GSR 14,4 VE-2-LI PROFESSIOAL ROBUST Powerful for challenging driving and drilling operations, extremely sturdy thanks to the Dura Shield shell, Bosch Premium Lithium technology for exceptional battery life and unbeatable power, ECP (Electric Cell Protection) to protect the battery against overload, overheating and total discharge. o memory effect, the battery can be charged without damage regardless of the charge level, Bosch Hyper Charge quick charge. EMP (Electronic Motor Protection) to protect the motor against overload and to guarantee a long service life tightening torque with progressive increase for an exact setup of all types of screws, metal auto-locking chuck with Auto-Lock for comfortable and simple tightening, integrated LED work area lighting, ergonomic handle with Softgrip coating. 402714,4/2 03 599,00 13 10 13 45 25 1 2 2 x 3.0 Ah Lithium Charger AL 1860 CV Case L-BOXX Dimensions: 213 x 253 h mm CORDLESS REVERSIBLE IMPACT DRILL/DRIVERS 14,4V BATTERY ITEM: GSB 14.4 V-LI PROFESSIOAL Powerful and compact, resistant even in heavy work, extremely sturdy thanks to the Dura Shield shell, Bosch Premium Lithium technology for exceptional battery life and unbeatable power, ECP (Electric Cell Protection) to protect the battery against overload, overheating and total discharge. o memory effect, the battery can be charged without damage regardless of the charge level, Bosch Hyper Charge quick charge. High-performance four-pole engine, integrated impact function, motor brake for fast and accurate screwing, auto-locking chuck with Auto-Lock for comfortable and simple tightening, integrated LED work area lighting, ergonomic handle with Softgrip coating and practical hook. 403014,4/3P 03 465,00 24000 13 13 13 32 60/25 18 1 2 x 4.0 Ah Lithium Charger AL 1860 CV Case L-BOXX Dimensions: 195 x 248 h mm.22

ITEM: GSR 18 V-EC CORDLES DRILL WIRELESS 18 V makes them always ready to use and provides better protection against dust and splashing water thanks to the absence of contacts of the new charger. From the compact shape, length of the head very contained (only 179 mm) for perfect handling and equipped with innovative battery technology "Coolpack" which ensure optimum heat dissipation, thus, extend the battery life up to 100%. Equipped with Electronic Cell Protection (ECP) protects the battery against overload, overheating and total discharge, the system "Electronic Motor Protection" (EMP) that protects the motor against overload and ensures a long service life, spindle AutoLock 13 mm for 404018W4 03 569,00 18 13 38 50/26 2 lithium batteries 2.0 Ah wireless Wireless Charger Charging GAL 1830 W Fixing frame for the charger Case L-BOXX 136 ITEM: GSR 1800-LI CORDLESS REVERSIBLE DRILL/DRIVERS 18V Powerful, compact tool, featuring 25+1 torque adjustment stages for extremely accurate fastening tasks. Twospeed tool: optmised torque for screwdriving tasks and optimal drilling speed. ECP (Electronic Cell Protection) to prevent overload in case of high energy consumption, overheat and deep discharge. Up to 400% longer service life than the average. 10 mm Autolock chuck for perfect fastening of accessories, bit holder, speed controlled by trigger switch and rubberized ergonomically designed grip 404518 03 209,00 18 29/10 29/10 34/18 2 lithium batteries 1.5 Ah Charger AL 1814 CV Case L-BOXX Dimensions: 204 mm ITEM: GSR 18,0 V-LI PROFESSIOAL Extremely compact thanks to the smallest design (only 185 mm) in its class; low weight (only 1.8 kg) for perfect handling. Powerful 67 m torque thanks to the newly designed gears and the new high-performance 4-pole Bosch motor. 13 mm auto-locking chuck. Bosch Premium Lithium technology: the only one if its kind ensuring as much as 400% longer battery life and unbeatable battery power. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. Integrated LED for work area lighting even in dark places. Motor brake for fast and accurate screwing. Ergonomic handle with reduced size and with Softgrip coating for effortless work. 405018 03 509,00 18 8 13 35 2 x 4.0 Ah Lithium Charger AL 1860 CV Case L-BOXX Insert for L-BOXX Dimensions: 185 x 248 h mm.23

CORDLESS DRILL/DRIVERS 18V BATTERY ITEM: GSR 18 VE-2-LI PROFESSIOAL ROBUST Extremely powerful cordles drill, 80M for the toughest screwdriving and drilling application. Compared to Profesional version it is characterized by a KickBack Control (KBC) that defects sudden jamming and shuts the tool down, by ergonomic handle with softgrip coating and by a Electronic Motor Protection EMP) that protects the motor against overload and ensures a long lifetime. 405218 03 689,00 18 13 12 13 50 80/43 25 1 2 x 4.0 Ah Lithium Charger AL 1860 CV Auxiliary handle Case L-BOXX Dimensions: 213 x 253 h mm ITEM: BDF 456 RFE CORDLESS DRILLS 18V BATTERY 4-pole motor with a 20% weight reduction, LED work area lighting. Variable speed and reversibility, electric brake and ergonomic Softgrip. 405518/4 03 719,00 18 13 13 38 50/36 16 2 x 3 Ah Li-ion Charger Belt clip Case CORDLESS ROTARY HAMMERS 18V BATTERY ITEM: GBH 18 V-LI COMPACT PROFESSIOAL The most compact in its class (total length of only 278 mm, incl. SDS Plus) for small to medium screw-driving and drilling operations on wood and metal. Pneumatic hammer mechanism, optimised for holes from 4 to 8 mm. Screwing: screws up to 6 mm diameter in wood. Bosch Premium Lithium technology: the only one if its kind ensuring as much as 400% longer battery life and unbeatable battery power. Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating and total discharge. Bosch Hyper Charge: thanks to rapid charging, the batteries are charged to 75% after only half of the total charging time. o memory effect: the battery can be recharged at any time regardless of the charge level without damaging the cells. 406018 03 549,00 18 1 8 16 2 x 2 Ah Lithium Charger AL 1820 CV Case L-BOXX Dimensions: 285 x 218 h mm.24

ITEM: BHR242RFE CORDLESS 18V BRUSHLESS DRILL HAMMERS With easy-action reversing switch, quick-coupling drill bit holder, 40-angle chisel orientation with a rubber battery holder. 406218BL/4 03 896,00 18 24 13 Fast charger 2 x 3.0 Ah batteries Lateral handle Rod of depth Dimensions: 328 x 85 x 213mm ITEM: GLI 10,8 V-LI BATTERY FLASHLIGHT 10,8V Powerful and bright 1-Watt LEDs with extremely clear light. All the advantages of lithium technology, handle with Softgrip coating and practical clip for hooking, uses Bosch 10.8 Volts lithium batteries, batteries and charger not included. 407010,8 03 52,00 450 Dimensions: 158 x 52 h mm BATTERY FLASHLIGHT 14,4/18V ITEM: GLI VARILED PROFESSIOAL Extremely clear light, high brightness with three innovative and powerful LEDs, variable focused/diffuse light beam and nine adjustable lighting angles. All the advantages of lithium technology, extremely compact thanks to its innovative folding mechanism, clips for attaching, uses all Bosch 14.4 and 18 Volts lithium batteries, batteries and charger not included. 407214,4-18 03 85,00 300 Dimensions: 130 x 80 x 40 h mm.25

LITHIUM BATTERIES 03 409010,8/2 80,00 2 409014,4/4 160,00 409018/4 199,00 18 4 409036/4 269,00 36 LITHIUM BATTERIES 03 409210,8 85,00 409218 202,00 409218/4 227,00 IMH-HD BATTERIES 03 409314,4 286,00 WIRELESS BATTERIES 18V 03 409418 139,00 18 LITHIUM CELL BATTERY CHARGERS 03 409510,8/A 70,50 409514,4-36 145,00.26

ELECTRIC REVERSIBLE DRILLS ITEM: GBM 10 RE PROFESSIOAL Supply voltage 230 Volts, powerful and compact, electronic control for a precise initial drilling phase. Autolocking metal chuck for high precision and long service life, with anti-loosening safety screw during left-hand rotation, handle with Softgrip coating for a secure and comfortable grip, practical belt clip attachment, 43 mm collar Ø for use on a column support. 4100600/1 03 199,00 600 10 10 10 25 Dimensions: 249 x 194 h mm ITEM: GBM 13-2 RE PROFESSIOAL Supply voltage 230 Volts, powerful and accurate, fully equipped with ball and roller bearings for long service life and precise work, pre-set number of revolutions with setting wheel. Auto-locking metal chuck for high precision and long service life, with anti-loosening safety screw during left-hand rotation, 43 mm collar Ø for use on a column support. 4103750/1 03 345,00 13 13/8 20/12 32/20 Auxiliary handle Depth stop 210 mm Dimensions: 332 x 208 h mm ELECTRIC REVERSIBLE AGLED DRILLS ITEM: GWB 10 RE PROFESSIOAL Supply voltage 230 Volts, slender cylindrical body, small angular size (only 23 mm) and very low height thanks to the cashed chuck. Pre-set number of revolutions with speed setting wheel, chuck rack. 03 455,00 400 10 10 10 22 4109400AG Dimensions: 298 x 76 h mm.27

ELECTRIC REVERSIBLE IMPACT DRILLS ITEM: GSB 16 RE PROFESSIOAL Supply voltage 230 Volts, compact and handy with sturdy metal gear housing, pre-set number of revolutions with setting wheel. Auto-locking metal chuck with Auto-Lock for quick one-handed tool changes, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and improve operation, 43 mm collar Ø for use also on a column support. 4110750P/1 03 185,00 13 16 18 13 30 Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 285 x 214 h mm ITEM: HP1631 ELECTRIC REVERSIBLE IMPACT DRILLS Two functions: rotation + impact, rotation. Reversible, equipped with auto-locking chuck. Electric switch and ergonomic handle with Softgrip coating. 4112710P/1 03 148,00 13 13 30 16 Lateral handle Auto-locking chuck ELECTRIC REVERSIBLE IMPACT DRILLS ITEM: GSB 19-2 RE PROFESSIOAL Supply voltage 230 Volts, compact and handy with sturdy metal gear housing, pre-set number of revolutions with setting wheel, mechanical anti-rotation and anti-overload-clutch. Auto-locking metal chuck with Auto-Lock for quick one-handed tool changes, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and improve operation, 43 mm collar Ø for use also on a column support. 4120850P/1 03 239,00 850 13 18/13 20/15 13/8 40/25 Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 336 x 214 h mm ITEM: GSB 21-2 RCT PROFESSIOAL Supply voltage 230 Volts, powerful and suitable for the most demanding applications, Constant Electronic for constant rpm even when under load, Torque Control for rotation power pre-selection, mechanical anti-rotation and anti-overload clutch. Auto-locking metal chuck with Auto-Lock for quick one-handed tool changes, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and improve operation, 43 mm collar Ø for use also on a column support. 41221300P/1 03 339,00 1300 13 22/13 24/16 16/10 40/25 Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 355 x 220 h mm.28

ELECTRIC SDS PLUS REVERSIBLE ROTARY HAMMERS ITEM: GBH 2-28 DFV PROFESSIOAL Maximum drilling progress and chiselling performance in its class. Operation increased as much as 25% compared to other rotary hammers in its class, provides greater convenience. 27% vibration reduction compared to the previous model thanks to the active cushioning of vibrations. Replaceable chuck for quick passage from impact drilling in concrete to drilling without impact in wood and metal. Adjustable brush holder to guarantee the same power in right and left-hand rotation. Safety clutch for user and tool protection. Reversibility (right and-left hand rotation) for freeing blocked bits. 4130800M/1 03 438,00 850 68 13 30 Case Auxiliary handle Depth stop 210 mm Chuck SDS Plus Auto-locking chuck 13 mm Dimensions: 402 x 216 h mm ITEM: GBH 2-20 D PROFESSIOAL Supply voltage 230 Volts, sturdy and compact with great versatility thanks to the chisel function, stepless adjustment of the number of revolutions for a more sensitive drilling start. Safety clutch against overload and for tool and user protection, impact stop for drilling steel and wood, Variolock for positioning the chisel at the desired location, comfortable handle with Softgrip coating. 4131650M/1 03 252,00 650 20 68 13 30 Auxiliary handle Depth rod 210 mm Plastic case Dimensions: 325 x 212 h mm ELECTRIC SDS PLUS REVERSIBLE ROTARY HAMMERS ITEM: GBH 2-24 D PROFESSIOAL Supply voltage 230 Volts, compact and balanced thanks to its "L" shape, system for quick replacement of the SDS Plus coupling with auto-locking chuck. Stepless adjustment of the number of revolutions for a more sensitive drilling start, impact stop for drilling steel and wood and rotation stop for chiselling. Safety clutch against overload, Vibration Control for effective vibration reduction, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and impediments. 4133790M/1 03 279,00 Auto-locking chuck Quick-change 13mm Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 354 x 233 h mm.29

ELECTRIC SDS PLUS REVERSIBLE ROTARY HAMMERS ITEM: GBH 3-28 DFR PROFESSIOAL Supply voltage 230 Volts, compact and balanced thanks to its "L" shape, system for quick replacement of the SDS Plus coupling with auto-locking chuck. Stepless adjustment of the number of revolutions for a more sensitive drilling start, impact stop for drilling steel and wood and rotation stop for chiselling. Safety clutch against overload, Vibration Control for effective vibration reduction, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and impediments. 4140800M/2 03 462,00 800 28 82 13 30 Auto-locking chuck Quick-change 13mm Auxiliary handle Depth stop 210 mm Plastic case Dimensions: 354 x 233 h mm ITEM: GSH 3 E PROFESSIOAL ELECTRIC SDS PLUS DEMOLITIO HAMMERS Supply voltage 230 Volts, high removal capacity, electronic control for supplying adequate power. Extremely sturdy hammer mechanism with oil lubrication for long service life, starter switch with lock, handle with Softgrip coating for a secure and comfortable grip. 4141650D/1 03 465,00 650 Flat chisel 40 x 260 mm Pointed chisel 250 mm Auxiliary handle Grease tube Plastic case Dimensions: 376 x 208 h mm ELECTRIC SDS MAX ROTARY HAMMERS ITEM: GBH 5-40 DCE PROFESSIOAL Supply voltage 230 Volts, powerful multi-purpose, variable adjustment of number of revolutions and strokes for optimum power, COSTAT ELECTROIC for constant rpm even under load. TURBO POWER with automatic insertion for increased power and high material removal, safety clutch against overload, VIBRATIO COTROL for effective vibration reduction. Start switch with lock for effortless chipping work, Vibration Control for effective vibration reduction, handle with Softgrip coating for a secure and comfortable grip, ball coupling of the cable to prevent breakage and impediments. 41431150M/1 03 1.142,00 1150 11 40 90 Auxiliary handle Grease tube Cloth Plastic case Dimensions: 485 x 260 h mm.30

ITEM: GWS 750 PROFESSIOAL ELECTRIC AGLE GRIDERS Supply voltage 230 Volts, lightweight and easy to handle, chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, adjustable grinding wheel guard with axial safety lock and extra handle for both right and left-hand use. Equiped with the RESTART PROTECTIO, protection against the restarting in case of power interruption. 4205660/1 03 95,00 660 11000 115 115 01 4200RIC 12,99 Protection cap Clamping nut Dual hole wrench Dimensions: 263 x 104 h mm ITEM: GWS 9-115 PROFESSIOAL Supply voltage 230 Volts, powerful and easy to handle, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel, extra Vibration Control handle for both right and left-hand use. Equiped with the RESTART PROTECTIO, protection against the restarting in case of power interruption. 4210115/2 03 145,00 900 11000 115 115 01 4200RIC1 18,48 Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 284 x 102 h mm ITEM: GWS 11-125 PROFESSIOAL Supply voltage 230 Volts, powerful and compact, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel, extra Vibration Control handle for both right and left-hand use. Plastic case. Equiped with the RESTART PROTECTIO, protection against the restarting in case of power interruption. 4212125/1 03 185,00 1100 11000 125 125 01 4200RIC1 18,48 Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 336 x 102 h mm.31

ELECTRIC AGLE GRIDERS ITEM: GWS 13-125 CI PROFESSIOAL Supply voltage 230 Volts, powerful, compact, technologically advanced, starting current limiter for a smooth and safe start and Constant Electronic for constant rpm even under load. Kick-Back-Stop for power turn-off in case of wheel lock, protection against accidental restarting, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel, extra Vibration Control handle for both right and left-hand use. 4215125/2 03 209,00 1300 11500 125 125 Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 297x103h mm KICK BACK STOP 01 4200RIC2 20,91 ITEM: GWS 1400 PROFESSIOAL Supply voltage 230 Volts, powerful, compact, technologically advanced, starting current limiter for a smooth and safe start and Constant Electronic for constant rpm even under load. Kick-Back-Stop for power turn-off in case of wheel lock, protection against accidental restarting, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel. 4217125/1 03 189,00 1400 11000 125 125 M14 Protection cap Clamping nut handle Dual hole wrench Dimensions: 297x103h mm KICK BACK STOP 01 4200RIC4 20,91 ITEM: GWS 17-125 CI PROFESSIOAL Supply voltage 230 Volts, extra-powerful, compact, technologically advanced, starting current limiter for a smooth and safe start and Constant Electronic for constant rpm even under load. Kick-Back-Stop for power turn-off in case of wheel lock, protection against accidental restarting, direct cooling for overload, high resistance and long service life. Chuck lock for easy wheel change, safety switch to prevent accidental starting. Gear head rotatable in steps of 90, anti-rotating quick positioning guard for grinding wheel, extra Vibration Control handle for both right and left-hand use. 4218125/3 03 275,00 11500 125 125 Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 311x103h mm KICK BACK STOP 01 4200RIC2 20,91.32

ITEM: GWS 17-125 IOX AGLE GRIDERS smooth start and safe, preset speed of six positions. Constant Electronic for constant speed under load, Kick Back Stop to stop the power in case of blocking of the grinding wheel, protection against unexpected restart, direct cooling and dust protection for a high resistance, overload protection for a long lifespan. Large spindle lock button for easy replacement of the grinding wheel, safety switch against accidental switch, head gear rotated by 90, headphone wheel cover with quick positioning positioning, auxiliary handle Vibration Control applicable both right and left. Plastic casing. 42201700/2 03 350,00 125 125 M14 Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 311x103 mm KICK BACK STOP 01 4200RIC2 20,91 ITEM: GWS 15-125 CIH PROFESSIOAL Good handling thanks to the ergonomic handle with Softgrip coating and to its low weight. Ideal for continuous use and overhead work. The most powerful 1500 W Champion motor with protection against accidental restarting. Kick-Back-Stop: detects a block and turns off the tool immediately. Anti-rotation protective guard - quickly and easily adjustable, provides reliable protection. Auxiliary Vibration Control handle with 40% vibration reduction for low-fatigue work (E 60745). Safety switch for immediate shut-off when the tool is released. Constant Electronic for constant rpm under load. Gear head rotatable in 90 steps. Handle for both left and right-hand use. 42221500 03 299,00 1500 860 11000 125 125 M14 01 4200RIC3 16,56 Protection cap Clamping nut Vibration Control Handle Two-hole key Dimensions: 344 x 103 h mm KICK BACK STOP ITEM: GWS 15-125 CIEH PROFESSIOAL Good handling thanks to the ergonomic handle with Softgrip coating and to its low weight. Ideal for continuous use and overhead work. The most powerful 1500 W Champion motor with protection against accidental restarting. Kick-Back-Stop: detects a block and turns off the tool immediately. Anti-rotation protective guard - quickly and easily adjustable, provides reliable protection. Auxiliary Vibration Control handle with 40% vibration reduction for low-fatigue work (E 60745). 6-stage revolution number pre-setting based on the different materials. Safety switch for immediate shut-off when the tool is released. Constant Electronic for constant rpm under load. Gear head rotatable in 90 steps. Handle for both left and right-hand use. 42231500 03 325,00 1500 860 125 125 M14 01 4200RIC3 16,56 Mounting capclamping nutvibration Control HandleTwo-hole key Dimensions: 344 x 103 h mm KICK BACK STOP.33

ELECTRIC AGLE GRIDERS ITEM: GWS 15-150 CIH PROFESSIOAL Good handling thanks to the ergonomic handle with Softgrip coating and to its low weight. Ideal for continuous use and overhead work. The most powerful 1500 W Champion motor with protection against accidental restarting. For 150 mm discs - deeper cutting depth and greater material removal. Kick-Back-Stop: detects a block and turns off the tool immediately. Anti-rotation protective guard - quickly and easily adjustable, provides reliable protection. Auxiliary Vibration Control handle with 40% vibration reduction for low-fatigue work (E 60745). Safety switch for immediate shut-off when the tool is released. Constant Electronic for constant rpm under load. Gear head rotatable in 90 steps. Handle for both left and right-hand use. 42251500 03 305,00 1500 860 9300 150 125 M14 01 4200RIC3 16,56 Clamping nut Two-hole key Protection cap Vibration Control Handle Case Dimensions: 382 x 102 h mm KICK BACK STOP ITEM: GWS 22-230 JH PROFESSIOAL Supply voltage 230 Volts, powerful and low-weight, starting current limiter for a smooth and safe start, protection lock against accidental restarting. Chuck lock for easy wheel change, three-control safety switch, anti-rotating quick positioning guard for grinding wheel, auxiliary Vibration Control handle for both right and left-hand use. 42302200/1 03 179,00 2200 6500 230 01 4200RIC4 20,91 Protection cap Clamping nut Dual hole wrench Additional handle Dimensions: 515 x 140 h mm ITEM: GWS 22-230 LVI PROFESSIOAL Supply voltage 230 Volts, powerful, easy to handle and technologically advanced, starting current limiter for a safe and smooth start. Kick-Back-Stop: turns off the machine immediately if there is a grinding wheel block. Chuck lock for easy wheel change, three-control safety switch, anti-rotating quick positioning guard for grinding wheel, primary Vibration Control handle and auxiliary Vibration Control handle for both right and left-hand use. 42322200/2 03 269,00 2200 6500 230 01 4200RIC4 20,91 Casing Protection cap Clamping nut Vibration Control handle Dual hole wrench Dimensions: 500 x 130 h mm KICK BACK STOP DIAMOD CUTTIG DISCS Suitable for use on all ferrous construction materials. Do not use on stone and granite. 01 01 505011520 19,10 505023024 93,50.34

ELECTRIC AXIAL GRIDERS ITEM: GGS 28 C PROFESSIOAL Supply voltage 230 Volts, compact, ergonomic and extremely easy to handle, Constant Electronic for constant rpm even under load, Kick-Back Stop device for immediate shut-down if the tool detects a block, ball bearing with double hermetic seal applied on rubber to minimise vibrations, brushes with automatic release for for stationary use. 4240600/1A 03 219,00 600 28000 25 6 6 mm collect chuck Dimensions: 291 x 75 h mm KICK BACK STOP ITEM: GGS 28 LC PROFESSIOAL Powerful 650-Watt motor with soft start for fast work progress. Long and slender sanding spindle - particularly suited for use in hard-to-reach areas. Kick-Back-Stop: immediate tool shut-down when a block of the grinding wheel is detected - for superior user protection. Constant Electronic System for constant rpm even under load. Compact and ergonomic shape for versatile sanding. Brush disengagement for high motor protection. Reduced maintenance thanks to an optimised useful life of the brushes. 4241650 03 395,00 650 28000 50 43 6 19 13 ITEM: GGS 28 LCE PROFESSIOAL Dimensions: 375 x 75 h mm Powerful 650-Watt motor with soft start for fast work progress. Long and slender sanding spindle - particularly suited for use in hard-to-reach areas. Kick-Back-Stop: immediate tool shut-down when a block of the grinding wheel is detected - for superior user protection. Constant Electronic System for constant rpm even under high load. Compact and ergonomic shape for versatile sanding. Brush disengagement for high motor protection. Reduced maintenance thanks to an optimised useful life of the brushes. 4242650 03 505,00 650 6 50 43 19 13 Equipment Dimensions: 375 x 75 h mm KICK BACK STOP KICK BACK STOP ITEM: GGS 8 CE PROFESSIOAL Supply voltage 230 Volts, strong and very resistant, suitable for more challenging milling and grinding work, rpm under load. Robust gear housing, protection switch against accidental starting, optimally positioned air intakes for high resistance to overloads and long service life. 4243650 03 529,00 50 43 6 19 13 6 mm collect chuck Dimensions: 332 x 82 h mm KICK BACK STOP.35

ELECTRIC ORBITAL SADERS ITEM: GSS 140 A PROFESSIOAL positions and Softgrip coating for maximum working comfort. 4251180/1 03 145,00 180 12000 24000 Plate punching 2 paper sandpaper sheets Plastic case Dimensions: 249 x 147 h mm EASY FIT ITEM: GSS 23 AE PROFESSIOAL Supply voltage 230 Volts, lightweight and manoeuvrable with electronic revolution and oscillation adjustment to work each type of material in the most appropriate way, Easy-Fit system with automatic tensioning for a gripping positions and Softgrip coating for maximum working comfort. 4252190/1 03 195,00 190 Plate punching 2 paper sandpaper sheets Plastic case Dimensions: 317 x 158 h mm EASY FIT ITEM: GSS 280 AE Supply voltage 230 Volts, lightweight and manoeuvrable with electronic revolution and oscillation adjustment to work each type of material in the most appropriate way, sanding pad for innovative and outstanding durability and for optimal surface quality. Sandpaper roll or Velcro connector for perfect suction, handle with palm position and removable front handle for wire sanding without obstacles. 4253330/1 03 355,00 330 5 mm L wrench key 2 sandpaper sheets Dimensions: 350 x 195 h mm ELECTRIC ROTO-ORBITAL SADERS ITEM: GEX 150 AC PROFESSIOAL Supply voltage 230 Volts, high removal model with revolution and oscillation adjustment and pre-setting for appropriate work in all types of applications. Constant Electronic for constant rpm even under load, pad brake sanding without obstacles. 4260340/1 03 329,00 340 150 5 mm hexagonal L wrench 120 grain abrasive disc Dimensions: 315 x 190 h mm.36

ELECTRIC ROTO-ORBITAL SADERS ITEM: GEX 150 TURBO PROFESSIOAL to raw sanding or to polishing. Constant Electronic for constant rpm even under load providing powerful turbo integrated suction duct for direct connection to the aspirator. 4261600/4 03 505,00 600 150 5 mm hexagonal L wrench 120 grain abrasive disc Plastic case Dimensions: 310 x 147 h mm ELECTRIC BELT SADERS ITEM: GBS 75 AE PROFESSIOAL Supply voltage 230 Volts, sturdy and extremely easy to handle with pre-selection of the number of revolutions for work suited to the material, sturdy toothed belt and related toothed metal wheels for long service life. Sanding pad with graphite coating, aluminium rollers, micro-adjustment of the guide roller for proper belt running and fast/stable tensioning lever for simple belt change. Direct suction connection to the aspirator or to the dust bag, removable front handle for wire sanding without obstacles. 4265750/1 03 359,00 Abrasive belt Dust bag Dimensions: 440 x 130 h mm.37

ELECTRIC JIG SAWS ITEM: GST 90 BE PROFESSIOAL Supply voltage 230 Volts, standard model with high comfort, switch with acceleration function for soft-start cutting with all materials. SDS system for tool-free blade change, four-position adjustable blade oscillation, integrated suction duct for direct connection to the aspirator, sawdust blower device that can be switched off, handle with Softgrip-coated grip points for maximum working comfort. 4305650/1 03 199,00 650 26 90 20 10 Blade 5 mm hexagonal L wrench Plastic case Dimensions: 393 x 330 h mm ITEM: GST 160 BCE Thanks to its double roller, the extremely precise guide prevents the blade from bending, providing excellent cutting precision. Compact and light structure, reduced handle size, for a maximised cutting control. Its blade replacement system (SDS), which does not require any tools while ensuring no gap, prevents blade vibration therefore also ensuring superior surface quality. A mass compensation system designed to attenuate vibrations, providing excellent rotational uniformity. High-performance LED ensures intense lighting of the cutting area. A powerful 800 watt motor complete with Constant Electronic system, represents a great power source for deep cutting also in case of hard materials Accuracy with a systematic approach: compatible with the new guide rail and with our Extra Clean for Wood blades for splinter-free cutting. Compatible with all Bosch dust aspirator for clean work operations. Sturdy magnesium crankcase and tool-free adjustment. 4307800/1 03 370,00 800 26 160 20 10 1 T 144 DP blade 1 T 244 D blade 2 T 308 B blades 1/1 insert for casing L-BOXX for tool Suction adapter Splinter protection L-BOXX 136 casing Dimensions 251x183h mm ITEM: GST 160 CE Thanks to its patented double roller, the extremely precise guide prevents the blade from bending, providing excellent cutting precision. Its blade replacement system (SDS), which does not require any tools while ensuring no gap, prevents blade vibration therefore also ensuring superior surface quality. A mass compensation system designed to attenuate vibrations, providing excellent rotational uniformity. High-performance LED ensures intense lighting of the cutting area. A powerful 800 watt motor complete with Constant Electronic system, represents a great power source for deep cutting also in case of hard materials Sturdy magnesium crankcase and tool-free adjustment. 4308800 03 370,00 800 26 160 20 10 1 T 144 DP blade 1 T 244 D blade 2 T 308 B blades 1/1 insert for casing L-BOXX for tool Suction adapter Splinter protection L-BOXX 136 casing Dimensions 251x183h mm.38

ELECTRIC CIRCULAR SAW BLADES ITEM: GKS 65 GCE PROFESSIOAL Precise interaction with the new Bosch FS guide system and with guide rails of other suppliers. Execution of angled cuts with the guide without any adapter. High cutting progress thanks to the powerful 1,800-Watt motor and the Constant Electronic system. Base in cast aluminium with a precisely milled groove for the guides. 44011800 03 435,00 1800 5900 30 190 65 48 Suction adapter MD blade 190 mm Ø L-BOXX 5 mm hexagon L wrench Dimensions: 320 x 270 h mm ELECTRIC CIRCULAR BLADES WITH TEETH FOR WOOD HM OPTILIE Special steel body with expansion groove to prevent deformation, suitable for fast and accurate cutting of soft and hard wood, pressed and plywood, laminboard and chipboard. 505536 01 50,00 190 30 36 B1: Cutting width B2: Blade body thickness ELECTRIC SHEARS ITEM: GSC 160 PROFESSIOAL Supply voltage 230 Volts, short, easy to handle, with an excellent view of the cutting line, tight curving radius, protected safety slide switch. 4501500/2 03 549,00 500 5000 01 4501LR/1 30,50 Upper/lower blade 3 mm hexagon L wrench Dimensions: 232 x 115 h mm ITEM: GSC 2.8 PROFESSIOAL Supply voltage 230 Volts, slim body, slender shape for optimum manoeuvrability, adjustable blades with cutting edges on both sides, tight curving radius and good view of the cutting line. Protected safety slide switch, additional knob handle for optimum stability during cutting. 4502500/3 03 609,00 500 2400 01 4502LR/2 56,00 Template adjustment Pair of blades 2.5 mm allen key 5 mm hexagon L wrench Dimensions: 292 x 205 h mm.39

ELECTRIC IBBLERS ITEM: GA 2.0 PROFESSIOAL Supply voltage 230 Volts, slim and compact body with high manoeuvrability, adjustable matrix for better access to corners with locking option for straight cuts. Protected safety slide switch. Work without problems thanks to track templates and cuts from solid. 4520500/4 03 679,00 2400 2 1 3 6 16 2 ELECTRIC HEAT GUS ITEM: GHG 600 CE PROFESSIOAL Punch for curve cut Matrix 2.5 mm allen key Dimensions: 275 x 127 h mm Supply voltage 230 V, universal model suitable for heating, removing paint and welding operations for coating 46012000/1 03 229,00 2000 Dimensions: 340 x 105 h mm ITEM: GHG 660 LCD PROFESSIOAL temperature and air adjustment in ten positions via the LCD display. Memorisation of the four main applications for proper adjustment of both the air and temperature, automatic shut-down in case of longer overheating time, 46022300/1 03 235,00 2300 1 75 mm protective nozzle Plastic case Dimensions: 255 x 255 h mm ITEM: HG 5012 K ELECTRIC HEAT GUS removal of varnish, welding and hardening applications 46031600/1 03 113,00 Plastic casing Dimensions: 240x80x200h mm.40

ITEM: T 111 C JIG SAW BLADES FOR WOOD 01 510111 5,50 100 3 1 ITEM: T 144 D 01 510213 8,20 100 1 ITEM: T 244 D 01 510315 9,40 100 1 ITEM: T 344 D 01 510417 16,50 152 4 1 ITEM: T 101 B 01 510519 8,20 100 1 ITEM: T 101 D 01 510621 8,60 100 1 ITEM: T 301 CD 01 510723 21,50 3 1 ITEM: T 345 XF JIG SAW BLADES FOR WOOD WITH METAL including aluminum (3-10 mm). 01 510825 37,50 132 1 ITEM: T 118 AF JIG SAW BLADES FOR METAL Two-metal, wavy corrugated, milled, thin sheet metal (1-3 mm). 01 512027 19,00 92 1 ITEM: T 118 BF Two-metal, wavy corrugated, milled, medium-thick sheet metal (1-3 mm). 01 512129 17,00 92 1 ITEM: T 118 G HCS, wavy corrugated, milled, very thin sheet metal (0.5-1.5 mm). 01 512231 7,70 92 1.41

ITEM: T 118 A JIG SAW BLADES FOR METAL HSS, wavy corrugated, milled, thin sheet metal (1-3 mm). 01 512333 7,70 92 1 ITEM: T 218 A HSS, wavy corrugated, milled, thin sheet metal (1-3 mm). Ideal for cutting curved 01 512435 8,60 92 1 ITEM: T 318 A 01 512537 16,80 132 1 ITEM: T 118 B HSS, wavy corrugated, milled, medium-thick sheet metal (2.5-6 mm). 01 512639 7,70 92 1 ITEM: T 318 B JIG SAW BLADES FOR ALUMIIUM AD O-FERROUS METALS mm). Angle and precise cuts. 01 513041 16,80 132 2 1 ITEM: T 127 D 01 513143 8,90 100 3 1 ITEM: T 227 D 01 513245 8,90 100 3 1 ITEM: T 118 AHM JIG SAW BLADES FOR STAILESS STEEL 01 514047 53,00 83 1 ITEM: T 118 EHM 01 514149 53,00 83 1 ITEM: T 102 BF JIG SAW BLADES FOR ACRYLIC MATERIAL 01 515052 15,10 92 1.42

JIG SAW BLADES FOR FIBRE/CEMET MATERIALS ITEM: T 141 HM 01 516053 47,00 100 1 ITEM: T 341 HM 01 516155 85,00 132 1 JIG SAW BLADES FOR CERAMIC MATERIALS ITEM: T 130 RIFF 01 517057 23,50 83 1 ITEM: S 2345 X BLADES FOR UIVERSAL SAWS - BLADES FOR WOOD mm), wooden walls (< 150 mm). Fine cut and effortlessly. 01 5180A 18,40 200 1 ITEM: S 1111 K 01 5181B 13,80 225 1 ITEM: S 922 HF BLADES FOR UIVERSAL SAWS - BLADES FOR WOOD WITH AILS/METAL (3-12 mm). 01 5190C 28,00 150 1 ITEM: S 3456 XF 01 5191D 40,50 200 1 ITEM: S 922 EF UIVERSAL SAW BLADES FOR METAL 01 5111G 28,00 150 1 ITEM: S 922 BF 01 5112F 28,00 150 1.43

BLADES FOR UIVERSAL SAWS - BLADES FOR METAL ITEM: S 1122 EF 01 5113E 30,00 225 5 ITEM: S 1122 BF 01 5114H 30,00 225 1 JIG SAWS BLADES ICOS LEGED.44

KEYLESS DRILL CHUCKS ITEM: SUPRA Reliable clamping force even under the most severe operating conditions. S-version recommended for portable drills. * B18 cone shortened by 7 mm. 01 520110 74,60 520111 95,75 10 B16 520112 81,65 520113 102,80 13 46 B16 520114 109,85 16 51 520115 109,85 B18* ITEM: SUPRA SK Safety clamping device for maximum reliability even with strong vibrations and reverse rotation, protection against dust and side drain holes with ejecting centrifuge in case of dust intrusion. 01 520220 88,70 ITEM: SPIRO-SK Accurate execution, chamfered cap and 0.05 mm concentricity. Recommended for high-speed drills, boring machines and special drilling units. 01 520313 173,90 13 50 B16 520316 185,65 16 55 ITEM: EXTRA RV Metal cap, ergonomic shape and high concentricity, radial locking and hexagon for assembly and disassembly. Suitable for all types of drills up to 1100 Watts. GR13 carbide jaws. a * - without retaining ring * - with retaining ring 01 520440 38,18 10 520441 38,18 520442 45,23 13.45

TAPER COUPLIGS FOR DRILL SPIDLES ITEM: 236 Taper shank with tang DI 228 B. Completely hardened and ground. 01 L A C E G H 5210CM1B10 6,00 86 55 B10 5210CM1B12 6,00 89 65 B12 62 1 5210CM1B16 6,00 24 90 B16 5210CM1B18 6,00 32 100 B18 5210CM2B10 6,30 130 B10 5210CM2B12 6,30 135 B12 5210CM2B16 6,30 24 160 2 B16 5210CM2B18 6,50 32 180 B18 5210CM2B22 6,80 130 B22 5210CM3B12 8,40 124 300 B12 5210CM3B16 8,40 134 24 310 B16 5210CM3B18 8,40 141 94 32 320 3 B18 5210CM3B22 8,40 B22 5210CM3B24 8,90 380 B24 5210CM4B16 17,80 159 24 625 B16 5210CM4B18 20,55 168 32 660 4 B18 5210CM4B22 17,80 B22 5210CM5B16 34,65 196 24 B16 1600 5 5210CM5B18 34,65 32 B18 REDUCTIO SLEEVES FOR DRILLS WITH MORSE TAPER 218 ITEM: 262 Accurate execution DI 2185. Fully hardened and ground internally and externally. 01 L 5211CM2/1 9,00 92 5211CM3/2 12,50 112 5211CM4/3 16,00 140 5211CM5/4 33,00 EXTRACTORS/PULLIERS FOR MORSE COES ITEM: 5215 Vanadium chrome zinc chromed steel. 01 521501-2 6,60 140 521503 8,80 3 190 521504 10,50 4 225 521505-6 28,00 265 SEMI AUTOMATIC DRILL DRIFTS Special hardened burnished steel, thermoplastic handle. 01 52161-3 84,00 330.46

ITEM: 5220 METRIC THREADIG SET M3-M12-22 PCS Supplied in its sturdy rigid plastic box Composition: - 21 Pces taps M3-M4-M5-M6-M8-M10-M12 3 pieces each - 1 Pc Tap wrenches 01 5220M3M12 138,00 ITEM: 5221 METRIC THREADIG SET M3-M12-16 PZ Provided in foam covered comfortable tray contained in rigid plastic box. Composition: - 7 pces taps M3-M4-M5-M6-M8-M10-M12-1 adjustable tap wrench gr. 1, 1/2 - dies. 7pcs d.25 mm M3-M4-M5-M6-M8-M10-M12-1 die wrench 25 x 9mm 01 5221M3M12 146,00 ITEM: 5223 METRIC THREADIG SET M3-M12-43 PZ Supplied in its sturdy rigid plastic box Composition: - 21 Pces taps M3-M4-M5-M6-M8-M10-M12 3 each - Dies 7 pcs M3-M4-M5-M6-M8-M10-M12 - Drills 7 pcs DI 338 (2,5-10,2) - Die holder 5 pcs - Tap wrenches 2 pcs - Screw pitch gauge caliper 1 pcs 01 5223SET43 289,00 COICAL STEP DRILLS ITEM: 5230 HSS steel, suitable for ferrous and non-ferrous metal and plastic. 52300412 52300420 52300630 52300936 52301220 52302030 01 23,00 29,00 48,00 78,00 38,00 66,00 6 8 10 12 9 12 80 98 86 88 COICAL STEP DRILL BIT SET ITEM: 5231 step drill bit set in rigid plastic box. 5231SET3/1 01 134,00 3.47

COICAL DRILLS FOR SHEET METAL ITEM: 1700 HSS-E steel, suitable for ferrous and non-ferrous metal and plastic. 52333-14 52336-20 523316-30,5 523324-40 523336-50 523340-61 01 25,00 34,00 65,00 132,00 198,00 242,00 1 2 3 4 5 6 6 8 9 10 12 13 58 89 102 COICAL DRILL BIT SET FOR SHEET METAL ITEM: 1720 Conical drill bit set in metal case. 5234SET3/1 01 155,00 3 JOBBER DRILLS FOR SMALL PRODUCTIO SERIES Geometry Point angle 118 Surface treatment Vaporized Application General application Roll forged execution TIP DI 338 5240 01 L 524003 0,68 3 33 61 3 524003,5 0,81 39 524004 0,95 4 43 4 524004,5 1,06 80 524005 1,19 5 52 86 5 524005,5 1,37 93 524006 1,51 6 6 524006,5 1,94 63 101 524007 2,18 69 109 524007,5 2,23 524008 2,39 8 8 524008,5 2,85 524009 3,12 9 81 125 9 Sold as Indivisible packaged items 10 5240 01 L 524009,5 3,23 81 125 524010 3,64 10 10 133 524010,5 4,42 524011 5,18 11 11 94 142 524011,5 5,18 524012 6,62 12 12 524012,5 8,85 101 151 524013 10,06 13 524014 20,06 14 108 160 524015 25,21 15 114 169 524016 27,17 16 120 13 524018 33,31 18 130 191 524020 42,66 20 140 205 10 5 1.48

STUB DRILLS FOR SMALL PRODUCTIO SERIES Geometry Standard helix, right hand cutting Point angle 118 Surface treatment Vaporized Application General use Ground execution TIP DI 1897 5242 01 L 524203 1,13 3 524203,1 1,23 14 524203,2 1,23 524203,25 1,23 524203,3 1,23 40 524203,4 1,23 524203,5 1,23 524203,6 1,50 16 524203,7 1,50 524203,75 1,50 42 524203,8 1,50 524204 1,50 4 524204,1 1,50 18 44 Sold as Indivisible packaged items 10 5242 01 L 524204,2 1,91 18 44 524204,5 1,91 524204,8 1,91 20 48 524204,9 2,02 524205 2,02 5 22 50 524205,1 2,02 524205,2 2,19 524205,3 2,19 24 52 524205,5 2,19 524205,6 2,19 524205,7 2,63 524205,8 2,63 26 55 524206 2,63 6 10 JOBBER DRILL KIT - 5245 Geometry Right hand /R type normal helix Point angle 118 Surface treatment Steam tempering Application General application Roll forget 1740 01 5245SET19 30,00 19 5245SET25 49,00 25 STRAIGHT FLUTE TAPS FOR THROUGH HOLES ISO coarse thread DI 13 Tolerance 6H ISO 2 Surface treatment Bright < 2XD Hole type Through Application General use on low-alloyed steel TAP DI 371 TAP DI 376 5250 01 L 5250M3 10,10 56 10 5250M4 10,10 63 12 5250M5 10,20 14 6 5250M6 10,30 80 16 5 MALE DI 371-376 01 L 5250 5250M8 12,60 90 18 8 5250M10 14,50 100 20 10 8 5250M12 20,60 110 25 9.49

SPIRAL FLUTE TAPS FOR BLID HOLES ISO Threading coarse pitch thread DI 13 Tolerance 6H ISO 2 Surface treatment Bright < 2,5XD Hole type Blind Application Generic use on low-alloyed steel TAP DI 371 TAP DI 376 MALE DI 371-376 5252 01 L 5252M3 11,00 56 5252M4 11,00 63 5252M5 11,00 10 6 5252M6 11,00 80 12 5 01 L 5252 5252M8 13,60 90 15 8 5252M10 15,10 100 10 8 5252M12 20,90 110 18 9 THERMAL FRICTIO DRILLS ITEM: 5260 The DRABUS frictiondrilling process creates the possibility of making holes in thin metal sheets and thin-walled tubes in just a few seconds without chips, while forming a bushing at the same time. This bushing can be used as a soldering or welding connection or as a bearing bushing. By tapping a screw-thread it can also be used as screw connection. The DRABUS frictiondrilling process replaces and eliminates the use of rivet or welding nuts as well as steel insert bushings. It accordingly saves time, work and material. 01 D1 L1 D2 5260370 78,00 3 6 5300 5260460 82,00 4100 5260540 88,00 5 8 3500 5260730 108,00 6 3300 5260920 128,00 12 52601240 175,00 2000 BI-METAL HOLE SAWS ITEM: 5270 Bi-metal saw ring with HSS M42 (8% Co) cutting edge, sturdy steel body construction, medium hardness 63 HRC, suitable for steel, stainless steel, aluminium, copper, bronze, etc., max. cutting depth 35 mm. 01 01 527014 8,38 14 527041 12,69 41 527016 8,38 16 527043 13,24 43 527017 8,38 527044 13,34 44 527019 8,38 19 527046 13,79 46 527020 8,38 20 527048 14,12 48 527021 8,38 21 527051 14,44 51 527022 8,50 22 527052 14,57 52 527024 8,82 24 527054 14,90 54 527025 9,05 25 527056 16,00 56 527027 9,60 527057 16,32 527029 9,92 29 527059 16,44 59 527030 10,15 30 527060 16,88 60 527032 10,59 32 527064 17,11 64 527033 11,04 33 527065 17,65 65 527035 11,36 35 527067 18,32 527037 11,70 527068 18,86 68 527038 11,91 38 527070 18,65 527040 12,46 40 527073 19,52 01 527076 20,19 527079 20,74 527083 22,94 83 527086 23,28 86 527089 23,50 89 527092 24,16 92 527095 26,37 95 527098 28,78 98 5270102 30,45 102 5270105 32,32 105 5270108 32,55 108 5270111 34,43 111 5270114 32,55 114 5270121 40,27 121 5270127 42,36 5270133 46,44 133 5270140 49,87 140 5270152 54,71 152.50

BI-METAL HOLE SAWS - SHARK ITEM: 5272 Cutting edge made of Bi-metal HSS 8% Cobalt (M42). Progressive variable toothing 4/6 suitable for Steel, Stailess Steel, Aluminium, Copper, Bronze, etc. Maximum cutting depth 48mm. 01 01 527214 7,07 14 527216 7,54 16 527217 7,77 527219 7,77 19 527220 8,01 20 527221 8,49 21 527222 8,01 22 527224 9,42 24 527225 9,66 25 527227 10,44 527229 11,08 29 527230 11,39 30 527232 12,25 32 527233 13,04 33 527235 13,27 35 527237 13,98 527238 14,22 38 527240 14,29 40 527241 14,61 41 527243 15,00 43 527244 15,32 44 527245 15,86 45 527246 16,11 46 527248 16,89 48 527250 17,43 50 527251 17,75 51 527252 18,30 52 527254 18,85 54 527255 19,40 55 527257 19,79 527259 20,57 59 527260 20,82 60 527264 22,14 64 527265 22,46 65 527267 22,86 527268 24,35 68 527270 25,21 527273 26,15 01 527275 26,39 527276 27,10 527279 27,96 527283 29,53 83 527286 30,55 86 527289 31,33 89 527292 32,44 92 527295 33,85 95 527298 34,87 98 5272100 36,53 100 5272102 37,15 102 5272105 40,14 105 5272108 41,16 108 5272114 44,30 114 5272121 47,04 121 5272127 51,13 5272140 56,47 140 5272146 58,75 146 5272152 60,39 152 COUPLIG FOR BI-METAL HOLE SAWS ITEM: 5273 Complete with pilot drill bit adjustable through the screw on the side of the chuck. 01 52731 14,00 52732 14,00 52733 16,50 52734 27,00 52735 27,50 DRILL BITS FOR BI-METAL HOLE SAWS 52746 52747 01 8,80 8,80.51

BI-METAL HOLE SAWS I CASE Kit designed for precision drilling tasks with thickness up to 38-44 mm Recommended for steel, cast iron, aluminum, copper, wood and plastic cutting works 01 5276SET6 140,00 ITEM: 5277 kit 9 pcs bi-metal hole saws high speed with progessive variable toothing 4/6, including two attacks and a reduction. 01 5277SET9 127,00 HSS STEEL HOLE CUTTERS WITH CHIP BREAKER ITEM: 5280 Complete with shank drill bit and extraction spring, suitable for steel, stainless steel, cast iron, aluminium, etc., max. cutting depth 5 mm. 01 528012 14,84 12 528013 16,35 13 528014 16,60 14 528015 17,70 15 528016 17,98 16 528017 18,79 528018 19,07 18 528019 20,30 19 528020 21,11 20 528021 21,92 21 528022 22,74 22 528023 23,83 23 528024 24,64 24 528025 25,76 25 528026 26,68 26 528027 27,38 528028 28,62 28 528029 29,43 29 528030 30,38 30 528031 31,33 31 528032 32,42 32 528033 33,38 33 5 D 8 6 9 20 22 01 528034 34,33 34 528035 35,28 35 528036 36,23 36 528037 37,18 528038 38,14 38 528040 40,07 40 528041 43,32 41 528042 44,02 42 528043 44,83 43 528044 45,78 44 528045 46,87 45 528046 47,82 46 528047 48,92 528048 49,59 48 528049 50,68 49 528050 51,49 50 528052 73,44 52 528054 76,02 54 528055 77,67 55 528060 84,48 60 528065 111,47 65 528070 119,92 6 D 9 10 8 12 22 24.52

HOLE CUTTERS WITH CARBIDE TIPS ITEM: 5285 Tungsten carbide tipped hole saws, interchangeable drill bit with spring extraction, suitable for stainless steel, aluminium 01 528516 47,90 16 528517 47,50 528518 47,90 18 528519 47,90 19 528520 52,90 20 528521 52,90 21 528522 52,90 22 528523 52,90 23 528524 52,90 24 528525 52,90 25 528526 61,60 26 528527 61,60 528528 61,60 28 D 6 10 12 01 D 528529 61,60 29 528530 61,60 30 528532 71,80 32 528533 71,80 33 528535 71,80 35 528536 81,60 36 528538 83,70 38 6 10 528540 83,70 40 528542 96,50 42 528545 96,50 45 528548 110,00 48 528550 110,00 50 528560 140,00 60 13 12.53

SCREW EXTRACTORS KIT ITEM: 5290 The tool body is made of tool steel of the highest quality and subjected to various heat treatments to reach a hardness of 64 Rockwell. In this way the tool has the ability to pierce screws whit quality 8.8 or stainless steel. The unique feature is the left hand cutting edge. The reversible power drill must in fact be operated for the entire operation in a counterclockwise direction. designed for drilling rough surfaces. The drilling depth needed for the extraction is very low, this means a drilling time shorter and less odds that the operator drills offset and going to damage the thread. On the release ring are made of seven helical grooves. These optimally distribute the tensions in the hole without causing the expansion of the broken screw, main reason of failures that occur using standard extractors. 5290M3M6 01 82,70 ITEM: 5291 The tool body is made of tool steel of the highest quality and subjected to various heat treatments to reach a hardness of 64 Rockwell. In this way the tool has the ability to pierce screws whit quality 8.8 or stainless steel. The unique feature is the left hand cutting edge. The reversible power drill must in fact be operated for the entire operation in a counterclockwise direction. designed for drilling rough surfaces. The drilling depth needed for the extraction is very low, this means a drilling time shorter and less odds that the operator drills offset and going to damage the thread. On the release ring are made of seven helical grooves. These optimally distribute the tensions in the hole without causing the expansion of the broken screw, main reason of failures that occur using standard extractors. 5291M6M12 01 114,80 TAP EXTRACTORS FOR BROKE TAPS ITEM: 5293 Remove broken taps and save the threads. Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Model with 3 beam to put into the groove of a broken taps. 01 MA 529303 39,70 M3 #4 529304 39,70 M4 #8 529305 39,70 M5 #10 529306 41,00 M6 529308 42,80 529310 42,80 529312 47,80 M12 Available on request others dimensions. ITEM: 5294 Remove broken taps and save the threads. Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Model with 4 beam to put into the groove of a broken taps. 01 MA 529404 39,70 M4 #8 529405 39,70 M5 #10 529406 41,00 M6 529408 42,80 529410 42,80 529412 47,80 M12 Available on request others dimensions..54

TWIST DRILLS FOR MASORY/COCRETE ITEM: SILVER PERCUSSIO Head with special geometry for high feed, wide HM cutting edge discharged at the bottom to avoid drill bit breakage and hard steel body with U spiral groove. Suitable for drilling masonry, concrete, natural and 01 D L1 L2 53013X70 2,65 3 40 53014X75 2,80 4 53015X85 2,90 5 50 85 53016X100 3,00 6 60 100 5 53018X120 3,50 80 120 53018X200 7,10 8 150 200 53018X400 10,10 350 400 1 530110X120 5,00 80 120 530110X200 8,50 10 150 200 9 5 530110X400 13,50 350 400 1 530112X150 7,50 90 150 530112X200 10,60 12 150 200 5 530112X400 12,90 350 400 10 530114X150 9,80 90 150 14 530114X400 15,40 350 400 1 530116X160 12,60 100 160 16 530116X400 18,40 350 400 Drill bit set in plastic case DRILL BIT SET FOR MASORY/COCRETE 5302SET5/1 5302SET7/1 01 12,40 18,70 5 4.55

SDS PLUS DRILL BITS FOR MASORY/COCRETE WITH FOUR SPIRALS Head with HM cutting edges and geometry optimised for maximum energy transfer for fast drilling, innovative quadruple spiral for rapid removal of drilling dust and vibration reduction and for increased bit 01 D L1 L2 53054X110 5,20 4 50 110 53055X110 4,10 5 53055X160 4,95 100 160 53056X110 4,10 50 110 53056X160 4,45 6 100 160 53056X210 7,60 150 210 5 53058X110 5,20 50 110 53058X160 5,30 100 160 53058X210 6,30 8 150 210 53058X260 8,10 200 260 53058X460 18,50 400 460 1 530510X160 6,20 100 160 530510X210 7,50 150 210 5 10 530510X260 9,60 200 260 530510X460 15,90 400 460 1 530512X160 7,30 100 160 530512X210 8,50 150 210 5 12 530512X260 10,90 200 260 530512X460 18,90 400 460 1 530514X160 10,80 100 160 530514X210 12,30 150 210 5 14 530514X260 13,50 200 260 530514X460 23,00 400 460 1 530516X210 15,60 150 210 5 530516X310 18,20 16 250 310 530516X450 30,50 400 450 530518X300 33,00 250 300 18 530518X450 34,50 400 450 530520X300 37,00 250 300 20 530520X450 39,00 1 530522X450 62,00 22 400 450 530525X450 73,00 25 Drill bit set in plastic case DRILL BITS FOR MASORY/COCRETE WITH FOUR SPIRAL SDS PLUS 5306SET5/2 01 28,00 5 1.56

Coupling SDS Plus SDS - PLUS POITED CHISELS FOR ROTARY AD DEMOLITIO HAMMERS 5350250 01 19,80 250 1 Coupling SDS Plus SDS - PLUS FLAT CHISELS FOR ROTARY AD DEMOLITIO HAMMERS 5351250 01 19,80 20 250 1 Coupling SDS Max SDS - MAX POITED CHISELS FOR ROTARY AD DEMOLITIO HAMMERS 5352400 01 24,50 400 1 Coupling SDS Max SDS - MAX FLAT CHISELS FOR ROTARY AD DEMOLITIO HAMMERS 5353400 01 24,50 25 400 1 MIXERS FOR LIQUIDS ITEM: 5360 Used for paints, varnishes, primers, plasters light. 5360600 01 14,00 600.57

TWISTOIL IDUSTRIAL ASPIRATORS/SEPARATORS ITEM: 4500 Supply voltage 220/240 Volts, system designed to suck up them back into the machine tool. Drastically reduces replacement costs for oils and coolants, improving safety and the work environment as well. Trolley transport system with oil-resistant wheels, braking wheel and space for accessories. Elastomer compound conical lance with connection Tank capacity l 130 Solid material container l 37 Power (single-phase) kw/hp 2.4 / 3 Max. depression mm/h2o 2200 Air capacity l/min. 3360 oise level db(a) 76 Suction mouth mm 50 1" Weight kg 195 02 6005131 3.090,00 6005145 53,00 6015105 30,50 6015110 43,00 6005150 9,00 6005135 41,00 6005140 18,50 6005155 61,00 6005160 49,00 6005165 89,00 6005170 123,00 6005175 69,00 6005180 119,00.58

MII STORM UIVERSAL ASPIRATORS ITEM: 6010 Mini storm is an industrial-use, single-phase aspirator for solid materials. Powerful and reliable vacuum tool, ideal for non-continuous works. Equipped with By-pass motors, separate buttons, hand vertical dust collector shaker. Among the most compact in its category. Mini Storm, great performance and dramatically reduced storage space. - Adapter 70 / 50 mm lance L 350 mm - Antistatic rubber sleeve/nozzle Voltage Volt/Hz 230 / 50-60 power (mono-phase) kw/hp 2.2-3 Max. depression mm/h2o 2160 Air capacity m³/h 340 Filtering surface cm² 15.000 Protection class IP 44 oise 70 Container 45 Suction inlet mm 70 Dimensions mm 510x520x1240 h Weight Kg 45 02 601035 1.590,00 6005145 53,00 601040 29,00 6015105 30,50 601045 23,00 601050 113,00 6005160 49,00 6005165 89,00 6005170 123,00 6005175 69,00 6005180 119,00 Alarm device when tank il full - It permits automatic aspiration interruption when the tank is full. Composed of: - container wet and dry 601235KITTP 02 410,00.59

IDUSTRIAL ASPIRATORS VACUUM CLEAERS STORM 3600 ITEM: STORM 3600 Supply voltage 220/240 Volts, three independent bypass Cyclone and tangential air inlet with release, quick accessory attachment device. Trolley transport system with braking wheel and convenient storage area for accessories and other related products. Removable container for suctioned materials. 80/50 mm reduction Elastomer compound conical lance with connection Curved extension connection Tank capacity l 100 Power (single-phase) kw/hp 3.3-4.5 Max. depression mm/h2o 2160 Air capacity l/min. 492 oise level db(a) 76 Suction mouth mm 80 Dimensions mm 800x650x1640 Weight kg 70 02 6015100 1.887,00 6005145 53,00 6015115 39,00 6015125 21,00 6015105 30,50 601045 23,00 6015110 43,00 6015120 96,00 6015130 150,00 6005160 49,00 6005165 89,00 6005170 123,00 6005175 69,00 6005180 119,00 Composed by: - Elastomeric conical lance 6016KITFU 02 305,00 Composed by: - Float valve for liquids - Spherical valve 3/4" (to facilitate emptying). 6017KITP 02 204,00.60

VACUUM CLEAERS FOR DUST AD LIQUID ITEM: ASL 10 P Supply voltage 220/240 Volts, plastic tank, light-weight with homes, easily transported in vehicles. Brush Flat lance Rigid pipe 0.5 m (2 pcs.) Floor nozzle for dust Floor nozzle for liquids 603022 02 205,00 Tank/useful capacity l 22-6 Rated power Watt 1000 Air capacity l/sec. 53 oise level db(a) 62 36 Dimensions mm 410x410x560 Weight kg 9.2 ITEM: AS 27 I Supply voltage 220/240 Volts, stainless steel tank, transported in vehicles. Flat lance S rigid pipe (2 pcs.) Floor nozzle for dust Floor nozzle for liquids 603136 02 259,00 Tank/useful capacity l 36-25 Rated power Watt 1000 Air capacity l/sec. 53 oise level db(a) 62 40 Dimensions mm 410x410x760 Weight kg 10 ITEM: AS 400 IK Right balance between power, suction capacity and overall dimensions. Suitable for use in industry, crafts and commerce. Supply voltage 220/240 Volts, stainless steel tank and anti-static kit. 2.5 m Brush Flat lance S rigid pipe Floor nozzle for dust Floor nozzle for liquids 603250 02 298,00 Tank/useful capacity l 50-35 Rated power Watt 1200 Air capacity l/sec. 58 oise level db(a) 63 40 Dimensions mm 500x500x840 Weight kg 14 ITEM: AS 60 IK Tank/useful capacity l 80-56 Powerful, with great suction capacity, suitable for industry Rated power Watt 2900 and crafts where challenging performance is required. Air capacity l/sec. 150 Supply voltage 220/240 Volts, stainless steel tank and antistatic oise level db(a) 66.5 kit. 50 Accessories included: Ref. bristle adjustable brush 40 cm Dimensions mm 610x520x920 Weight kg 25.2 Brush Flat lance S rigid pipe Adjustable liquid brush 40 cm 603380 02 557,00.61

SPARE PARTS FOR DUST/LIQUID VACUUM CLEAERS 02 6035TF2,2 32,00 6035TF2,5 28,00 6035TF3 52,00 6035LP36 3,19 6035LP40 5,36 6035LP50 7,42 ITAKE WELDIG FUMES ASPIRATOR ITEM: 6050 The model ITAKE is the perfect solution for the welders' needs who normally have a limited space and do not want to lose time to move a suction arm. ITAKE is among the most compact in its class, powerful, The standard version consist of 3 mq cellulose cartridges and a single-phase motor 1000 W. Supplied with: - Cellulose cartridge Tension Volt 230 Power Watt 1000 Depression mbar 250 Air capacity m³/h 180 Filter media Cellulose Filter surface cm² 3000 Motors 1 Sound level db(a) 72 Suction mouth mm 36 Weight Kg 23 02 6050ASP 1.198,00 605010 29,00 605015 93,00 605020 236,00.62

CLEA GO WELDIG FUMES ASPIRATORS ITEM: 4600 Designed according to modern technological criteria, designed for industrial and crafts sectors that need easily transportable handling and strength. Machine maintenance is limited to replacing suction capacity ensures good extraction of noxious welding fumes without inhaling gases or cooling the welds, creating dangerous contractions of metals. CLEA GO was designed and built in full compliance with the law proposed by the American Conference of Governmental Industrial Hygienists, which set limits for the TLV values and for the maximum acceptable M.A.C. concentration of various pollutants (for welding fumes = 5 mg/mc). The extraction of toxic fumes from the workplace during winter creates a strong temperature drop in the room. CLEA GO is the solution to the into the room (where allowed by regulations ). OPERATIG PRICIPLE The polluted air is sucked in through the fully articulated and extendable patented arm with 360 rotation and introduced into the decantation chamber in which the heavier particles precipitate. At the same time, the smaller grain-size particles suspended in the air are captured and retained by highly into the work environment. - 2 activated carbon panels 6055ASP 02 1.750,00 FILTERIG GROUPS FOR FUMES ASPIRATORS ITEM: 4610 structure equipped on the top with a plate holding the connections for the suction piping or for inserting a selfsupporting arm. The hopper and the two pull-out dust collection drawers are located at the bottom. The group is also equipped with: Electric fan with the appropriate power for the size of the group; Soundproof plenum to cover the electric fan and expulsion noise; Hour counter; Swivel wheels for easy moving and handling. The group consists of a pre-chamber where the greater part of the dust is separated and deposited in the the residual dust. The high-performance fan located at the top of the unit provides high suction capacity and low noise levels. HORIZOTAL CARTRIDGES. The horizontal arrangement of the cartridges allows easy - Hopper and dust collection drawer with wheels - Self-supporting arm 150 Ø L = 3000 mm - O/OFF switch Hour counter 6057ASP 02 2.995,00 24 1500.63

HYDRAULIC PRESSES High performance, sturdy hydraulic press Entirely cut by laser, provides high precision during execution. A two-speed pump, one for rapid approach at low pressure, one for high pressure. The cylinder includes spring return and a manometer mounted off-therack. 7010120 02 1.500,00 1900 530 850 510 1050 80 100 12 7010200 02 1.790,00 1900 590 950 510 1050 80 110 20 7010300 02 2.100,00 1250 1120 130 250 30 7010500 02 2.850,00 2000 800 1350 805 1060 160 400 50.64

MOTORIZED HYDRAULIC PRESSES High performance, sturdy motorized hydraulic presses. Entirely cut by laser, provides high precision during execution. A twospeed pump, one for rapid approach at low pressure, one for high pressure. the cylinder includes spring return and a manometer mounted off-the-rack. 7011120 02 3.000,00 1900 530 1100 510 1050 80 170 12 1,4 0,3 7011200 02 3.400,00 1900 590 1150 510 1050 80 190 20 1,7 0,25 7011300 02 4.100,00 1970 700 1350 710 1120 130 350 30 1,4 0,3 7011500 02 5.100,00 2000 800 1350 805 1060 160 500 50 1,6 0,3 HAD SHEARS FOR SHEET METAL CUTTIG ITEM: F7015 Pivots and spring in tempered steel Anti-fall rebound spring lever. Lateral lock plate with adjustment threaded screw. 7015120 7015160 7015200 7015300 02 176,00 212,00 346,00 489,00 120 160 200 300 4 5 6 4.65

PARALLEL BECH VICES ITEM: 7020 Cast iron. Rear sliding jaw. Oversize screw with covered/sleeved threading. Exchangeable knurled, tempered jaws 7020080 7020100 7020125 7020150 02 78,00 100,00 126,00 181,00 80 100 125 150 110 145 130 185 8 12,5 13 19 PARALLEL BECH VICES ITEM: 7022 Forged steel Adjustable, prismatic double guide Exchangeable tempered jaws 7022100 7022125 7022150 02 146,00 171,00 225,00 100 125 150 140 165 200 7 11,5 18,5 PARALLEL BECH VICES ITEM: 7025 Forged steel, Sliding rear jaw Exchangeable tempered jaws 7025100 7025125 7025150 02 137,00 164,00 284,00 100 125 150 160 175 225 10 16 27.66

PARALLEL BECH VICES Special cast iron body, knurled steel jaws, hardened and ground. 7030080 7030100 7030120 7030150 02 80,00 109,00 136,00 200,00 80 100 120 150 110 140 185 220 6 11 18 25 Cast steel body, replaceable steel knurled jaws, hardened and ground. 7032100 7032120 7032150 02 221,00 278,00 425,00 100 120 150 130 160 175 11 16 24 Forged steel body, replaceable steel knurled jaws, hardened and ground. 7033100 7033120 7033150 02 155,00 177,00 301,00 100 120 150 170 200 230 10.5 16.5 27 7035125 7035150 02 132,00 192,00 125 150 150 200 11 17 DRILL VICES Special cast iron body, prismatic replaceable steel jaws, hardened and ground. 7040080 7040100 7040120 7040150 02 83,00 126,00 165,00 218,00 80 100 120 150 80 110 150 180 4 9 16 24.67

DRILL VICES - DOUBLE GUIDE Special cast iron body, prismatic replaceable steel jaws, hardened and ground. 7042100 7042125 02 165,00 208,00 100 125 95 125 6,5 11 MAGETIC JAWS I PAIRS FOR VICES 7045100 7045120 7045150 02 28,00 35,00 41,00 100 120 150 Fibre-coated aluminium. 7046100 7046120 7046150 02 31,00 39,00 46,00 100 120 150 7047100 7047120 7047150 02 31,00 39,00 44,00 100 120 150 JACK PIPE BEDIG MACHIE ITEM: ATLAS The article is equipped with 5 formers for pipes of 1/4" - 3/8" - 1/2" - 3/4" - 1" and with a sturdy jack. It coldbends gas and water pipes, without welding. UI E10255 (BS1387 - UI3824). 705000 02 450,00 PORTABLE TRESTLES FOR HYDRAULIC MAITEACE ITEM: 7052 Professional version with tilting clamp in forged steel, milled and tempered jaws. 02 705202 184,00 2" 20,5 705203 263,00 3" 24,5 705204 461,00 4" 40.68

ELECTRIC MARKIG PES Supply voltage 220 Volts / 50Hz, painted sheet steel body, suitable for engraving all metal electricity conductors, ideal for writing on and marking machine parts. 7060PE 7060CR 7060PR 02 305,00 68,00 15,40 7 VIBRATIG ELECTRIC MARKIG PES Supply voltage 220 Volts, impact-proof with vibration frequency controller, plastic body. Suitable for engraving all ferrous and non-ferrous materials, glass, ceramic, stone, plastic and wood. Ideal for writing on and marking parts already in place. 70657200 7065PR 02 72,80 12,10 7200 12 BECH DEMAGETISERS Supply voltage 220 Volts / 50Hz, painted sheet steel body, suitable for de-magnetising mechanical parts in contact with magnetic surfaces that have retained residual magnetism. 7070200 7070400 02 244,00 345,00 4.5 8 PORTABLE DEMAGETISERS Supply voltage 220 Volts / 50Hz, suitable for de-magnetising mechanical parts in contact with magnetic surfaces that have retained residual magnetism. Ideal for pieces of considerable size and 02 7071110 118,00 1.950 Suitable for magnetising/demagnetising screwdrivers and small clamping wrenches. 01 707248 19,00.69

PORTABLE LAMPS ITEM: 306 E 60598-1 E 60598-2-8 E 60335-1. Supply voltage 230 Volts, oil, acid and solvent resistant ergonomic plastic grip 02 708120 32,00 20 ITEM: 329 E 60598-1 E 60598-2-8 E 60335-1. Supply voltage 230 Volts, electronic power circuit built into the handle, oil, acid and solvent resistant ergonomic soft two-component grip, replaceable impact-proof protection bell, adjustable and folding retractable hook, switch in recessed protected compartment, 30-LED lamp with ultra-white light and no heat generation, with low power consumption, long lasting (included), supplied with 10 m cable with plug. 02 708355 113,00 55 ITEM: KL 230 cable with plug. 02 708455 75,00 55 C-CLAMP MODEL BALLAST LAMPS 708520 02 97,00 900 1.70 20 * on request available also in black or white. LAMP STADS Suitable for pantograph lamps 7086FP 7086FB 02 14,00 14,00.70

C-CLAMP MODEL BALLAST LAMPS WITH MAGIFYIG GLASS E 60598-1 E 60204-1. 7090900SB 02 234,00 120 3 0.75 900 1.70 20 7091900BA 02 295,00 120 3 0.75 900 1.70 20 FLUORESCET LAMP WITH SWIG ARM ITEM: 7095 709501 02 432,00 1,5 20 LAMPS WITH 12 V TRASFORMER E 60598-1 E 60204-1. Complies with the 626 Standard, supply voltage 230 V, toroidal transformer with thermal protection built into the and refrigerant emulsions with light source protection in tempered Pyrex glass, cable placed into the structure, 7096800 02 331,00 800 1.70.71

LAMPS WITH 12 V TRASFORMER E 60598-1 E 60204-1. coupling (included), black. 7097450 02 386,00 450 1.70 TECHICAL LAMPS 24 V E 60598-1 E 60204-1. source protection in tempered Pyrex glass, cable placed into the structure, compensated joints with 02 7098800 289,00 800 1.70 2P Technical features similar to 5689800. This model is particularly suited for installation in machine rooms (CC lathes and machining centres). 02 7099147 196,00 147 65 CABLE REELS ITEM: 7100 brake and cable reel knob, safety thermal cut-out. SUPPLY VOLTAGE 230 V 02 7100230A 143,00 7100230B 146,00 25 1400 7100230C 150,00 SUPPLY VOLTAGE 230 V 02 7102230D 233,00 40 1800.72

ITEM: 7103 safety thermal cut-out. SUPPLY VOLTAGE 380 V CABLE REELS 02 7103380 281,00 30 2500 CABLE REELS WITH LAMP ITEM: 7110 E 60598-1 E 60598-2-8 E 61242 E 60335-1, complies with 626 Standard. Supply voltage 230 Volts, impactresistant plastic body, cable roll guide mouth, cable rack stopping device that can be inserted at 50-cm intervals, included). 71101 02 161,00 1 CABLE REELS WITH LAMP AD 12-24 V TRASFORMER ITEM: 7111 E 60598-1 E 60598-2-8 E 61242 E 60335-1, complies with 626 Standard. Supply voltage 230 Volts, safety transformer with manually resettable cut-out against short circuits and overloads, impact-resistant plastic body, cable roll guide mouth, cable rack stopping device that can be inserted at 50-cm intervals, high-resistance cable 71112 02 263,00 1.73

CABLE REELS WITH LAMP AD 12-24 V TRASFORMER ITEM: 7112 E 60598-1 E 60598-2-8 E 61242 E 60335-1, complies with 626 Standard. Supply voltage 230 Volts, safety transformer with manually resettable cut-out against short circuits and overloads, impact-resistant plastic body, cable roll guide Inlet, cable rack stopping device that can be inserted at 50-cm intervals, high-resistance cable 71123 02 308,00 1 IDUSTRIAL CABLE REELS WITH SPRIG ITEM: 7115 E 61242 E 60335-1, complies with 626 Standard. Supply voltage 230 Volts, impact-resistant plastic body, cable roll guide mouth, cable rack stopping device that can be inserted at 50-cm intervals and easily removed when constant cable traction is needed, thermal cut-out, double ground contact, high-resistance cable recoil spring, 71154M 71155M 02 191,00 191,00 1200 1900 1800 2500 500 42 ITEM: 4315/GS E 61242 E 60335-1, complies with 626 Standard. Supply voltage 230 Volts, plastic external structure, cable roll guide mouth, cable rack stopping device that can be inserted at 50-cm intervals, thermal cut-out, double ground 71167M 02 214,00 1200 1800 500 42.74

COMPRESSED AIR HOSE REELS ITEM: 7120 E 12100-1 E 12100-2 Standards, complies with 626 Standard. Also suitable for cold water, maximum pressure 15 bars, impact-resistant plastic body, automatic hose-stopping device at the desired length, easily removable if 712010 02 169,00 8 1.5 COMPRESSED AIR HOSE REELS ITEM: 7121 E 12100-1 E 12100-2 Standards, complies with 626 Standard. Also suitable for cold water, maximum pressure 15 bars, impact-resistant plastic body, automatic hose-stopping device at the desired length, easily removable if 71216 71218 02 221,00 236,00 8 10 2 COMPRESSED AIR HOSE REELS ITEM: 7123 E 12100-1 E 12100-2 Standards, complies with 626 Standard. Also suitable for cold water, maximum pressure 12 bars, impact-resistant plastic body, automatic hose-stopping device at the desired length, easily removable if 71235,5 02 108,00 5.5.75

VIBRATIO-COTROL RUBBER MOUTS WITH 2 THREADED PIS ITEM: 8010 wide application for industrial use, for elastic suspensions and for absorbing machines and mechanical structures vibrations. Those vibration-control mounts are composed by molded rubber inside two M/M version with double threaded pin 01 D 80101515M4 1,72 M4 15 15 80101515M5 1,85 M5 10 80102020M6 2,08 20 80102520M6 2,28 20 M6 18 80102520M8 2,05 25 M8 20 80102530M6 2,18 30 M6 18 80103020M8 2,48 20 30 80103030M8 2,67 30 80104030M8 3,54 40 80104040M8 4,17 40 M8 23 80105030M10 5,31 30 50 80105040M10 5,54 40 M10 28 80106050M12 8,61 60 80107550M12 13,06 75 50 M12 37 801010060M16 26,61 100 60 M16 41 VIBRATIO-COTROL RUBBER MOUTS WITH 1 THREADED HOLE AD 1 THREADED PI ITEM: 8011 mechanical structures vibrations. Those vibration-control mounts are composed by molded rubber M/F version with single threaded pin and threaded blind hole 01 D 80111515M4 1,87 15 15 M4 10 80112020M6 2,08 20 20 80112520M6 2,05 25 80112530M6 2,26 30 M6 18 80113020M8 2,56 20 30 80113030M8 2,75 30 M8 23 80114020M8 3,54 20 40 80114030M8 3,69 30 80115030M10 6,46 50 M10 28 80115040M10 5,54 40 80116040M12 8,31 60 M12 37.76

VIBRATIO-COTROL RUBBER MOUTS WITH SIGLE THREADED PI ITEM: 8012 mechanical structures vibrations. Those vibration-control mounts are composed by molded rubber P/M version with single threaded pin 01 D 80121515M4 1,69 15 M4 10 15 80122015M6 2,03 20 M6 18 80123030M8 3,66 30 80124030M8 3,90 40 30 M8 23 80125030M10 5,16 50 M10 28 80121610M5 1,19 16 20 M5 12 8012208M6 0,89 8 10 80122010M6 1,77 20 10 80122025M6 2,24 25 M6 18 80122515M6 1,99 15 25 80122520M6 2,24 20 80123020M8 2,89 30 M8 23 80124030M10 3,68 40 30 80125020M10 3,93 20 50 80125040M10 5,25 40 M10 28 80126050M12 7,45 60 50 80127540M12 11,60 40 M12 37 75 80127550M12 12,30 50 801210050M16 20,88 100 M16 41.77

WHEELS TABLE/CHART.78

GRAY RUBBER WHEELS - POLYAMIDE CETRE ITEM: 8030 Gray rubber wheel ring, polyamide centre with thread-guards, electrolytically galvanised supports. Dimensions expressed in mm 01 803050G 4,85 50 20 0.20 67 24 76 35 803060G 7,68 60 24 0.28 83 21 84 50 803050F 4,50 50 20 0.20 67 24 76 35 6 803060F 5,74 60 24 0.26 83 21 84 50 803050GFR 8,27 50 20 0.24 67 24 76 35 803060GFR 11,33 60 24 0.40 83 21 84 50 0 +40 ITEM: 8032 Dimensions expressed in mm 01 803250P 4,96 50 20 0.18 66 15 35 24 76 35 803260P 7,79 60 24 0.29 83 25 41 21 84 50 803250PFR 8,37 50 20 0.21 66 15 35 24 76 35 803260PFR 11,20 60 24 0.36 83 25 41 21 84 50 SUITABLE For use in wet environments and with medium corrosive chemicals. OT RECOMMEDED For use in environments with organic solvents, chlorinated substances, hydrocarbons and mineral oils. 0 +40.79

BLACK RUBBER WHEELS SHEET METAL DISC ITEM: 8035 Black rubber ring, electrolytically galvanised sheet steel discs. Dimensions expressed in mm 01 803580R 2,11 80 25 0.17 8035100R 2,56 100 30 0.28 12 39 260 60 65 300 75 80 8035125R 3,41 125 37.5 0.51 44 330 85 130 15 8035150R 5,12 150 40 0.73 350 100 170 8035200R 8,75 200 50 1.75 20 58 410 140 230 ITEM: 8040 Black rubber ring, electrolytically galvanised sheet steel discs, electrolytically galvanised sheet steel light supports, rotating parts with double ball bearings lubricated by grease, orange polyethylene dust guard ring. Dimensions expressed in mm 01 804080G 7,45 80 25 0.69 107 39 65 8040100G 7,89 100 30 0.82 128 37 80 9 120 8040125G 11,19 125 37.5 1.18 156 39 130 8040150G 12,89 150 40 1.42 182 37 170 8040200G 23,31 200 50 3.25 240 11 56 156 230 804080F 5,35 80 25 0.49 107 39 65 8040100F 5,80 100 30 0.62 128 37 80 9 120 8040125F 7,88 125 37.5 0.92 156 39 130 8040150F 9,43 150 40 1.04 182 37 170 8040200F 18,21 200 50 2.89 240 11 56 156 230 804080GFR 13,30 80 25 0.87 107 39 65 8040100GFR 13,74 100 30 1.00 128 37 80 9 120 8040125GFR 17,04 125 37.5 1.30 156 39 130 8040150GFR 18,75 150 40 1.57 182 37 170 8040200GFR 32,24 200 50 3.39 240 11 56 156 230 SUITABLE For use in wet environments and with medium corrosive chemicals. OT RECOMMEDED For use in environments with organic solvents, chlorinated substances, hydrocarbons and mineral oils. -20 +60.80

POLYURETHAE WHEELS - POLYAMIDE CETRE ITEM: 8045 Injected polyurethane ring, polyamide 6 centre. Dimensions expressed in mm 01 804580R 2,88 80 0.11 39 220 120 120 30 12 8045100R 3,66 100 0.15 300 170 170 44 8045125R 6,11 125 35 0.25 15 350 230 230 8045150R 8,90 150 45 0.47 500 280 350 20 59 8045200R 16,86 200 50 0.82 700 380 450 ITEM: 8050 Injected polyurethane ring, polyamide 6 centre, electrolytically galvanised sheet steel light supports, rotating parts with double ball bearings lubricated by grease, orange polyethylene dust guard ring. Dimensions expressed in mm 01 805080G 8,25 80 0.62 107 39 120 30 8050100G 8,98 100 0.74 128 9 37 120 170 8050125G 13,89 125 35 0.91 156 39 220 8050150G 22,45 150 45 1.83 194 8050200G 31,11 200 50 2.23 240 11 56 156 300 805080F 6,16 80 0.38 107 39 120 30 8050100F 6,89 100 0.43 128 9 37 120 170 8050125F 10,43 125 35 0.66 156 39 220 8050150F 17,71 150 45 1.46 194 8050200F 25,99 200 50 2.01 240 11 56 156 300 805080GFR 14,11 80 0.81 107 39 120 30 8050100GFR 14,84 100 0.89 128 9 37 120 170 8050125GFR 19,74 125 35 1.05 156 39 220 8050150GFR 31,37 150 45 2.11 194 8050200GFR 40,02 200 50 2.49 240 11 56 156 300 SUITABLE For use in environments with weathering agents, alcohol and glycol, organic acids and minerals, water and saturated steam. ote: the 60 series can be supplied with stainless steel supports, particularly recommended for medical and foodstuff environments and for particularly strong substances. -15 +80.81

ITEM: 8055 Solid polyamide 6 wheels. POLYAMIDE WHEELS Dimensions expressed in mm 01 805580R 2,33 80 0.08 39 200 150 180 30 12 8055100R 3,12 100 0.13 350 175 300 44 8055125R 5,35 125 40 0.23 15 450 200 400 8055150R 8,14 150 45 0.34 600 250 500 20 59 8055200R 15,71 200 50 0.64 800 315 730 ITEM: 8060 Solid polyamide 6 centre, electrolytically galvanised sheet steel light supports, rotating parts with double ball bearings lubricated by grease, orange polyethylene dust guard ring. Dimensions expressed in mm 01 806080G 7,55 80 0.58 107 39 180 30 8060100G 8,34 100 0.65 128 9 37 120 200 8060125G 12,75 125 40 0.89 156 39 220 8060150G 21,30 150 45 1.77 194 8060200G 29,84 200 50 2.14 240 11 56 156 300 806080F 5,46 80 0.39 107 39 180 30 8060100F 6,36 100 0.46 128 9 37 120 200 8060125F 9,51 125 40 0.64 156 39 220 8060150F 17,07 150 45 1.45 194 8060200F 24,93 200 50 1.92 240 11 56 156 300 806080GFR 12,84 80 0.78 107 39 180 30 8060100GFR 13,88 100 0.85 128 9 37 120 200 8060125GFR 18,05 125 40 1.04 156 39 220 8060150GFR 29,18 150 45 1.99 194 8060200GFR 37,72 200 50 2.33 240 11 56 156 300 SUITABLE For use in wet environments and with highly aggressive chemicals. OT RECOMMEDED For use in environments with strong organic acids and mineral concentrates. -30 +80 ote: the 68 series can be supplied with stainless steel supports, particularly recommended for medical and foodstuff environments and for particularly strong substances..82

POLYURETHAE WHEELS - ALUMIIUM CETRE ITEM: 8065 TR polyurethane ring, aluminium centre. Dimensions expressed in mm 01 806580R 12,69 80 25 0.20 30 28 8 280 150 220 8065100R 18,82 100 30 0.34 12 350 225 250 40 32 10 8065125R 20,20 125 35 0.50 500 280 400 8065150R 27,39 150 40 0.91 50 47 14 850 330 600 20 8065200R/A* 43,62 1.47 360 200 50 55 52 15 1000 850 8065200R/B* 44,67 1.45 25 500 *dimensions for pallet trucks ITEM: 8070 TR polyurethane ring, aluminium centre, electrolytically galvanised sheet steel light supports, rotating parts with double ball bearings lubricated by grease, orange polyethylene dust guard ring. Dimensions expressed in mm 01 807080G 17,80 80 25 0.72 107 39 8070100G 23,93 100 30 0.94 128 9 37 120 200 8070125G 27,47 125 35 1.14 156 39 220 8070150G 40,48 150 40 2.34 194 8070200G 57,67 200 50 3.05 240 11 56 156 300 807080F 15,76 80 25 0.52 107 39 8070100F 21,88 100 30 0.69 128 9 37 120 200 8070125F 24,27 125 35 0.89 156 39 220 8070150F 35,99 150 40 2.04 194 8070200F 52,85 200 50 2.76 240 11 56 156 300 807080GFR 22,98 80 25 0.91 107 39 8070100GFR 29,11 100 30 1.08 128 9 37 120 200 8070125GFR 32,65 125 35 1.28 156 39 220 8070150GFR 48,20 150 40 2.63 194 8070200GFR 65,40 200 50 3.25 240 11 56 156 300 SUITABLE For use in environments with weathering agents, alcohol and glycol. OT RECOMMEDED For use in environments with mineral and organic acids, base solutions and saturated steam. -20 +80.83

POLYURETHAE WHEELS - CAST IRO CETRE ITEM: 8075 TR polyurethane ring, mechanical cast iron centre. Dimensions expressed in mm 01 8075100R 21,63 100 1.02 500 220 380 38 15 40 35 11 8075125R 27,75 125 1.45 600 240 450 8075150R 36,96 150 2.50 910 290 700 50 20 55 47 14 8075200R 57,09 200 3.65 1500 380 1000 ITEM: 8080 TR polyurethane ring, mechanical cast iron centre, galvanised colonial yellow sheet steel heavy supports, rotating parts with double ball bearings lubricated by grease, red polyamide 6 dust guard ring. Dimensions expressed in mm 01 8080100G 38,09 100 1.93 138 46 38 9 8080125G 44,54 125 2.37 161 48 120 350 8080150G 63,92 150 4.81 200 700 50 11 70 126 8080200G 88,01 200 6.06 250 750 8080100F 29,34 100 1.52 138 46 38 9 8080125F 35,61 125 2.04 161 48 120 350 8080150F 48,56 150 3.55 200 700 50 11 70 126 8080200F 70,53 200 5.15 250 750 8080100GFR 43,95 100 2.06 138 46 38 9 8080125GFR 50,38 125 2.5 161 48 120 350 8080150GFR 77,69 150 5.33 200 700 50 11 70 126 8080200GFR 101,77 200 6.66 250 750 SUITABLE For use in environments with weathering agents, alcohol and glycol. OT RECOMMEDED For use in environments with mineral and organic acids, base solutions and saturated steam. -20 +80.84

SIGMA ELASTIC RUBBER WHEELS ALUMIIUM CETRE ITEM: 8082 SIGMA ELASTIC rubber ring, aluminium centre. Dimensions expressed in mm 01 8082200R20* 32,94 20 200 50 2.00 8082200R25* 33,10 25 60 52 17.5 1000 335 500 *dimensions for pallet trucks SUITABLE For use in wet environments and with medium corrosive chemicals. OT RECOMMEDED For use in environments with organic solvents, aromatic substances, chlorinated substances, hydrocarbons. -20 +70 TR-ROLL POLYURETHAE WHEELS CAST ALUMIIUM CETRE ITEM: 8085 Hardness 75 Shore A. Suitable for use in industrial environments for transport of medium-heavy loads, also for mixed external-internal use. Dimensions expressed in mm 01 8085100R-C 23,26 100 40 0.39 15 40 32 10 400 300 300 8085160R-C 37,89 160 1.00 800 400 550 50 20 60 47 14.5 8085200R-C 52,13 200 1.60 1000 500 700 SUITABLE Suitable for use in industrial environments for transport of medium-heavy loads, also for mixed external-internal use..85

TR-POLYURETHAE ROLLERS CAST ALUMIIUM CETRE ITEM: 8090 Dimensions expressed in mm 01 8090100G 44,67 100 0.85 138 9 46 123 300 40 8090125G 62,99 125 2.33 170 350 8090160G 71,92 160 3.60 205 11 70 126 550 50 8090200G 89,10 200 4.31 250 700 8090100F 35,92 100 1.35 138 9 46 123 300 40 8090125F 49,63 125 1.69 170 350 8090160F 56,54 160 2.11 205 11 70 126 550 50 8090200F 71,62 200 2.85 250 700 8090100GFR 51,53 100 1.52 138 9 46 123 300 40 8090125GFR 76,75 125 1.86 170 350 8090160GFR 85,68 160 4.17 205 11 70 126 550 50 8090200GFR 102,85 200 4.91 250 700 SUITABLE For use at speeds up to 16 km/h and are, therefore, indicated for mechanical and mixed mechanicalmanual handling. -20 +70.86

ALICO ALLOY PERMAET MAGETS - 8101 ITEM: 8101 Alnico permanent magnets shielded with a brass ring, the shielding ensures increased magnetic coercivity allowing this product to maintain its shape even when inserted in ferrous components, the outer protection provides impact resistance. Heat-resistant up to 450. 01 A B C 81019,5 4,60 9.5 15 M3 1.5 810112,7 4,30 12.7 M4 2 15.8 810117,5 4,70 17.5 4 810120,6 5,60 20.6 19 5.5 810127 9,00 27 25.4 M6 10 81013520 16,00 20 12 35 81013530 18,50 18 30 810145 28,10 45 40 810150 39,30 50 40 M8 50 810155 13,50 55 14 10 ITEM: 8102 01 A B C 810219 5,30 19 8 M4 2.5 810228,6 6,60 28.6 9.5 5.5 M6 810238 10,50 38 11.1 10 ITEM: 8103 01 A B C 810319 5,60 19 12.7 1.9 4.8 810325,4 9,90 25.4 15.9 3 ITEM: 8104 01 A B C D E F 810419 11,10 19 30 20 4.5 14.5 5 810425 19,10 25 40 25 5 19 9 810444 59,20 44 59 35 35 7.5 29 24.87

ALICO ALLOY PERMAET MAGETS - 8105 ITEM: 8105 Alnico permanent magnets heat-resistant up to 450 01 A B 81056 1,60 6 20 81058 2,50 8 25 810510 3,70 10 30 EODYMIUM PERMAET MAGETS - 8110 ITEM: 8110 Composed of an iron casing and a neodymium internal magnet, pieces of electric discharging machines. 01 A B C M 8110A 14,60 7.5 19 6 8110B 19,10 6 16 M5 5 22 8110D 26,90 12 12 FERRITE RUBBER PERMAET MAGETS - 8111 ITEM: 8111 Magnetic rubber is a very malleable compound that is easily shaped, it does not feature a strong magnetic force, but if suitably applied it can solve major adhesion problems on walls and iron structures, it is easily applied. 01 A B C D 811170X20 1,90 20 70 3 8111120X30 4,60 30 120 6 811120 0,50 3 20.88

QUICK CLAMPS - 8400 ITEM: 8400 VERTICAL SERIES Galvanised hardened sheet steel clamping lever with plastic cover, supplied without spindle. 01 A B C D E F L M O. Q 840067 19,30 67 97 19 38 34 29 24 15 5.5 11 2 20 5 4.5 90 145 840085 22,80 85 142 28 50 42 35 29 19 6.5 14 2.5 28 6 5.5 160 300 8400110,5 25,90 110.5 162 32 67.5 45 43 32 20 8.5 18 40 8 6.5 220 350 3 8400129 37,20 129 195 42 79 50 46 29 10.5 20 42 10 8.5 270 450 65 8400164 58,80 164 247 55,5 106 58 45 32 26 4 64 8,5 280 500 12,5 M12 8400223 73,50 223 303 84,5 143 95 80 70 50 51 32 7 90 12,5 450 875 QUICK CLAMPS - 8410 ITEM: 8410 HORIZOTAL SERIES Galvanised hardened sheet steel clamping lever with plastic cover, supplied without spindle. 01 A B C D E F L M O. Q 841068 12,20 68 23 12 19 24,5 24 16 15 4,2 7 1,2 10 M4 4,3 40 8410118 18,60 118 37 20 40 26 28 17 13.5 5.5 11 2 20 5 4.5 90 135 8410170 20,00 170 51 29 56 40 36 26 6.5 14 2.5 32 6 5.5 100 200 26 8410195 24,20 195 61.5 36.5 65 42 44 28.5 8.5 18 3 37 8 6.5 170 260 8410269 36,00 269 83 50 100 56 60 41 41 10 22 3,5 58 M10 180 400 8,5 8410308 52,00 308 98,5 60 115 65 70 41,5 41,5 12,4 26 4 65 M12 320 620 HORIZOTAL SERIES WITH WITH ATI-REALEASE LEVER - 8412 ITEM: 8410 HORIZOTAL SERIES Some sizes of this series are also made of stainless steel and are shown in red. The main feature of this series is the special anti-release lever with the purpose of avoiding any accidental openings caused by from being crushed by the levers when opening. 01 A B C D E F L M O Q 8412118 24,20 118 37 20 39 26 28 16 19 13,5 5,3 11 2 20 M5 4,5 90 135 8412171 25,60 171 51 30,5 56,5 40 36 22,4 28,4 6,3 16 2,5 32 M6 5,6 100 200 26 8412196 29,80 196 61,5 36,5 65 44 44 26 31,5 8,5 18 3 37 M8 6,6 170 330.89

QUICK CLAMPS - 8420 ITEM: 8420 STRAIGHT-LIE ACTIO SERIES Galvanised hardened sheet steel clamping lever with plastic cover, base body of lacquered brass, * painted forged steel body, supplied without spindle. 01 A B C D E F L M O. Q * 842086 34,70 86 42.5 12 22 36 64 26 13 26 8.5 4.3 6 20 120 M6 12 8420116 41,40 116 56 15 31 46 85 11 5.2 30 280 33.5 36.5 36,5 8420122* 56,60 122 25 32 45.9 90 15 12 5.5 7 32 560 75 M8 8420165 74,10 164,5 18 42 55 122,5 16 14 7 42 800 41 15 35 41 8420182 85,80 182 95 25 49 57 133 M10 18 16 8,5 8 50 1600 CLAMPIG SYSTEM - 8435 ITEM: 8435 The circular movement of the handle is transformed in linear action ofthe latch. These clamps are mostly used to fasten hinged lids and forcontainers. Holding capacities from 160 to 700 da, and from 1700 to 4000 dafor heavy series. The hook can be set within the adjustment range (D). The mainfeature of different models are as follow. The bearing surface is parallel asto the line of action to the force. 01 A B C D E F L M Q 843598 20,50 98 25 12 35 44 28 20 19 10 16 26 14 18 4,3 25 M4 160 8435220 26,90 152 30 16 54 63 44 28 32 14,3 19 40 22 25 6,5 48 M6 320 8435221 45,30 220 42 24 70 90 54 38 38 19 41,5 60 26 36 8,5 58 M8 750 SPRIG PLUGERS WITH SLOT AD BALL, STEEL - 8440 ITEM: 8440 Material: Sleeve steel grade 5.8. Ball steel. Spring in spring steel class D. Version: Black oxidised. Ball hardened. 01 D D1 L 844003 1,84 M3 1,5 7 0,5 0,4 1,5 3 844004 1,42 M4 2,5 9 0,8 0,6 4 10 844005 1,42 M5 3 12 0,9 0,8 6 11 844006 1,42 M6 3,5 14 1 1 9 13 844008 1,84 M8 5 16 1,5 1,2 15 30 844010 1,84 M10 6 19 2 1,6 20 35 844012 2,86 M12 8 22 2,5 2 30 55 10.90

ITEM: 8441 Material: Stailess steel Sleeve 1.4305. Ball 1.4034. Spring 1.4310. Version: Bright. Ball, hardened. SPRIG PLUGERS WITH SLOT AD BALL, STAILESS STEEL - 8441 01 D D1 L 844103 4,48 M3 1,5 7 0,5 0,4 1,5 3 844104 3,85 M4 2,5 9 0,8 0,6 4 10 844105 3,85 M5 3 12 0,9 0,8 6 11 844106 3,85 M6 3,5 14 1 1 9 13 844108 5,08 M8 5 16 1,5 1,2 15 30 844110 5,71 M10 6 19 2 1,6 20 35 844112 7,12 M12 8 22 2,5 2 30 55 SPRIG PLUGERS WITH HEXAGO SOCKET AD THRUST PI, STEEL - 8445 ITEM: 8445 Material: Sleeve in steel grade 5.8; thrust pin in steel. Spring steel spring Grade D. Version: Black oxidised. Thrust pin hardened. 10 01 D D1 L 844503 4,06 M3 1 10 1,5 1 0,4 0,7 0,5 3 1,5 844504 3,25 M4 1,5 15 0,6 0,6 1,3 5 16 2 844505 3,07 M5 2,4 18 2,3 0,8 0,8 1,5 6 20 844506 3,25 M6 2,7 20 2,5 2,5 1 1 2 7 844508 3,66 M8 3,5 3 2,5 22 3 1,4 1,4 9 35 844510 4,28 M10 4 3,5 3 844512 5,28 M12 6 28 4 5 2 2 4 10 55 10 SPIDLE WITH EOPREE THRUST ITEM: 8430 Galvanised steel screw with two nuts. 01 A D F 8430M5 2,90 45 M5 10 8430M6 3,30 55 M6 13 8430M8 3,90 68 M8 16 8430M10 4,30 80 M10 20.91

DRILL JIG BUSHIGS DI 179 SHORT SERIES ITEM: 179/C Material 16 Cr i 4 Grinding tolerances d1 = F7 and d2 = n6 Heat Treatment Cementing + hardening Hardness 60-62 HRc 01 85002 1,51 2 85002,1 1,51 2.1 85002,2 1,51 2.2 85002,3 1,51 2.3 85002,4 1,51 2.4 85002,5 1,51 2.5 85002,6 1,51 2.6 85002,7 1,57 2.7 85002,8 1,57 2.8 85002,9 1,57 2.9 85003 1,57 3 85003,2 1,57 3.2 85003,3 1,57 3.3 85003,4 1,42 3.4 85003,5 1,42 3.5 85003,6 1,42 3.6 85003,7 1,42 3.7 85003,8 1,42 3.8 85003,9 1,42 3.9 85004 1,63 4 85004,1 1,63 4.1 85004,2 1,63 4.2 85004,3 1,63 4.3 85004,4 1,63 4.4 85004,5 1,63 4.5 85004,6 1,63 4.6 85004,8 1,63 4.8 85004,9 1,63 4.9 85005 1,63 5 85005,1 1,72 5.1 85005,5 1,72 5.5 85006 1,72 6 85006,1 1,89 6.1 85006,25 1,89 6.25 85006,5 1,89 6.5 85006,6 1,89 6.6 85006,8 1,89 6.8 85007 1,89 7 85007,5 1,89 7.5 85008 1,89 8 85008,25 2,19 8.25 85008,5 2,19 8.5 85008,75 2,19 8.75 85009 2,19 9 850010 2,19 10 850010,5 2,46 10.5 850011 2,46 11 850012 2,46 12 850012,5 2,68 12.5 850013 2,68 13 850013,5 2,68 13.5 850014 2,68 14 850014,5 2,68 14.5 6 5 8 10 12 6 7 8 10 12 15 18 16 22 01 850015 2,68 15 22 850015,5 3,15 15.5 850016 3,15 16 850016,5 3,15 16.5 16 850017 3,15 17 26 850017,5 3,15 17.5 850018 3,15 18 850018,5 4,26 18.5 850019 4,26 19 850019,5 4,26 19.5 850020 4,26 20 850020,5 4,26 20.5 30 850021 4,26 21 850021,5 4,26 21.5 850022 4,26 22 850022,5 4,95 22.5 850023 4,95 23 850023,5 4,95 23.5 850024 4,95 24 850024,5 4,95 24.5 20 35 850025 4,95 25 850025,5 4,95 25.5 850026 4,95 26 850026,5 6,11 26.5 850027 6,11 27 850027,5 6,11 27.5 850028 6,11 28 850028,5 6,11 28.5 42 850029 6,11 29 850029,5 6,11 29.5 850030 6,11 30 850030,5 8,88 30.5 850031 8,88 31 850031,5 8,88 31.5 850032 8,88 32 850032,5 8,88 32.5 48 850033 8,88 33 850034 8,88 34 850035 8,88 35 25 850036 11,43 36 850037 11,43 37 850038 11,43 38 850039 11,43 39 55 850040 11,43 40 850041 11,43 41 850042 11,43 42 850043 17,16 43 850044 17,16 44 850045 17,16 45 62 30 850046 17,16 46 850048 17,16 48 850050 21,23 50 70.92

DRILL JIG BUSHIGS DI 172 SHORT SERIES ITEM: 172/C Material 16 Cr i 4 Grinding tolerances d1 = F7 and d2 = n6 Heat Treatment Cementing + hardening Hardness 60-62 HRc 01 85102 2,28 2 85102,1 2,28 2.1 85102,2 2,28 2.2 85102,3 2,28 2.3 85102,4 2,28 2.4 85102,5 2,28 2.5 85102,6 2,28 2.6 85102,7 2,28 2.7 85102,8 2,28 2.8 85102,9 2,28 2.9 85103 2,28 3 85103,1 2,28 3.1 85103,2 2,28 3.2 85103,3 2,28 3.3 85103,4 2,11 3.4 85103,5 2,11 3.5 85103,6 2,11 3.6 85103,7 2,11 3.7 85103,8 2,11 3.8 85103,9 2,11 3.9 85104 2,11 4 85104,1 2,19 4.1 85104,2 2,19 4.2 85104,3 2,19 4.3 85104,4 2,19 4.4 85104,5 2,19 4.5 85104,6 2,19 4.6 85104,7 2,19 4.7 85104,8 2,19 4.8 85104,9 2,19 4.9 85105 2,19 5 85105,1 2,28 5.1 85105,5 2,28 5.5 85106 2,28 6 85106,1 2,58 6.1 85106,25 2,58 6.25 85106,5 2,58 6.5 85106,6 2,58 6.6 85106,75 2,58 6.75 85106,8 2,58 6.8 85107 2,58 7 85107,5 2,58 7.5 85108 2,58 8 85108,25 2,85 8.25 85108,5 2,85 8.5 85108,75 2,85 8.75 85109 2,85 9 851010 2,85 10 6 2 5 8 8 2.5 10 3 6 9 7 10 8 11 10 13 12 15 12 15 18 01 851010,5 3,15 10.5 851011 3,15 11 12 18 22 851012 3,15 12 851012,5 3,64 12.5 851013 3,64 13 851013,5 3,64 13.5 851014 3,64 14 22 26 851014,5 3,64 14.5 4 851015 3,64 15 851015,5 4,31 15.5 16 851016 4,31 16 851016,5 4,31 16.5 851017 4,31 17 26 30 851017,5 4,31 17.5 851018 4,31 18 851018,5 5,66 18.5 851019 5,66 19 851019,5 5,66 19.5 851020 5,66 20 30 34 851020,5 5,66 20.5 851021 5,66 21 851022 5,66 22 851023 7,16 23 20 851024 7,16 24 851025 7,16 25 35 39 851026 7,16 26 851027 7,44 27 851028 7,44 28 851029 7,44 29 5 42 46 851030 7,44 30 851031 12,75 31 851032 12,75 32 851033 12,75 33 48 52 851034 12,75 34 851035 12,75 35 851036 16,29 36 851037 16,29 37 25 851038 16,29 38 851039 16,29 39 55 59 851040 16,29 40 851041 16,29 41 851042 16,29 42 851043 24,68 43 851044 24,68 44 851045 24,68 45 62 66 30 6 851046 24,68 46 851048 24,68 48 851050 26,36 50 70 74.93

DRILL JIG BUSHIGS DI 179 LOG SERIES ITEM: 179/L Material 16 Cr i 4 Grinding tolerances d1 = F7 and d2 = n6 Heat Treatment Cementing + hardening Hardness 60-62 HRc 01 85202 1,63 2 9 5 85203 1,63 3 85203,2 1,63 3.2 6 85203,5 1,63 3.5 85204 1,63 4 12 7 85204,3 1,81 4.3 85204,5 1,81 4.5 8 85205 1,81 5 85205,5 2,06 5.5 85205,6 2,06 5.6 10 85206 2,06 6 85206,5 2,19 6.5 16 85207 2,19 7 12 85208 2,19 8 85208,5 2,46 8.5 85209 2,46 9 15 852010 2,46 10 20 852011 2,85 11 852012 2,85 12 18 852014 3,47 14 852015 3,47 15 22 852016 4,26 16 28 852017 4,26 17 26 852018 4,26 18 852019 5,19 19 852020 5,19 20 36 30 DRILL JIG BUSHIGS DI 172 LOG SERIES ITEM: 172/L Material 16 Cr i 4 Grinding tolerances d1 = F7 and d2 = n6 Heat Treatment Cementing + hardening Hardness 60-62 HRc 01 85302 2,51 2 9 2 5 8 85303 2,46 3 6 9 85303,5 2,37 3.5 85304 2,37 4 7 10 85304,1 2,46 4.1 12 2.5 85304,3 2,46 4.3 85304,5 2,46 4.5 8 11 85305 2,46 5 85305,5 2,51 5.5 85306 2,51 6 10 13 85306,5 2,85 6.5 16 85307 2,85 7 12 15 3 85308 2,85 8 85308,5 3,15 8.5 85309 3,15 9 15 18 853010 3,15 10 20 853011 3,47 11 853012 3,47 12 18 22 853013 4,72 13 853014 4,72 14 22 26 4 853015 4,72 15 28 853016 5,66 16 853017 5,66 17 26 30 853018 5,66 18 853019 7,57 19 853020 7,57 20 36 5 30 34 01 852021 5,19 21 852022 5,19 22 30 852023 6,20 23 852024 6,20 24 852025 6,20 25 36 35 852026 6,20 26 852028 7,52 28 852029 7,52 29 42 852030 7,52 30 852031 11,55 31 852032 11,55 32 852033 11,55 33 48 852034 11,55 34 852035 11,55 35 852036 14,49 36 45 852037 14,49 37 852038 14,49 38 852039 14,49 39 55 852040 14,49 40 852042 14,49 42 852044 22,17 44 852045 22,17 45 852046 22,17 46 56 62 852048 22,17 48 852050 25,16 50 70 01 853021 7,57 21 853022 7,57 22 30 34 853023 8,96 23 853024 8,96 24 35 39 853025 8,96 25 36 853026 8,96 26 853027 8,84 27 853028 8,84 28 853029 8,84 29 42 46 853030 8,84 30 853031 16,27 31 853032 16,27 32 853033 16,27 33 48 52 5 853034 16,27 34 853035 16,27 35 853036 19,76 36 45 853037 19,76 37 853038 19,76 38 853039 19,76 39 55 59 853040 19,76 40 853042 19,76 42 853044 31,05 44 853045 31,05 45 853046 31,05 46 56 62 66 853048 31,05 48 853050 32,64 50 70 74.94

THREADED ISERTS SELF-TAPPIG WITH CUTTIG SLOT - 8600 ITEM: 8600 Material: Steel Version: Steel, case-hardened, galvanized. ote: Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore. 01 D1 L 860003 24,60 M3 6 8 860004 28,80 M4 8 10 860005 41,00 M5 10 13 860006 47,10 M6 14 17 100 860008 56,80 M8 15 18 860010 82,80 M10 18 22 860012 131,50 M12 26 22 860016 219,00 M16 27 50 Price for 100 pcs. THREADED ISERTS SELF-TAPPIG WITH CUTTIG SLOT - 8601 ITEM: 8601 Material: Stainless Steel Version: Stainless steel bright. ote: Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore. 01 D1 L 860103 229,70 M3 6 8 860104 155,00 M4 8 10 860105 204,00 M5 10 13 50 860106 244,80 M6 14 17 860108 285,60 M8 15 18 860110 301,90 M10 18 22 860112 440,60 M12 22 26 20 Price for 100 pcs..95

WIRE THREAD ISERTS ITEM: 8610 Austenitic stainless steel 18/8 01 A B C 8610M30515D 35,20 4,00 4,50 6,50 8610M3051D 33,80 2,50 3,00 5,00 3,20 8610M3052D 38,90 5,50 6,00 8,00 8610M04071D 28,50 3.30 4.00 6.80 8610M040715D 31,40 5.30 6.00 8.80 4.20 8610M04072D 34,30 7.30 8.00 10.80 8610M05081D 34,10 4.20 5.00 8.20 8610M050815D 32,40 6.70 7.50 10.70 5.20 8610M05082D 35,80 9.20 10.00 13.20 8610M0611D 35,00 5.00 6.00 10.00 8610M06115D 35,00 8.00 9.00 13.00 6.30 8610M0612D 39,70 11.00 12.00 16.00 100 8610M081251D 37,70 6.80 8.00 13.00 8610M0812515D 41,60 10.80 12.00 17.00 8.40 8610M081252D 48,00 14.80 16.00 21.00 8610M0812525D 66,60 18,8 20,00 25,00 8,40 8610M101251D 56,70 8.80 10.00 15.00 8610M1012515D 83,90 13.80 15.00 20.00 10.40 8610M101252D 100,00 18.80 20.00 25.00 8610M101501D 44,80 8.50 10.00 16.00 8610M1015015D 50,80 13.50 15.00 21.00 10.50 8610M101502D 58,10 18.50 20.00 26.00 8610M121251D 80,60 10.80 12.00 17.00 8610M1212515D 123,50 16.80 18.00 23.00 12.35 8610M121252D 165,70 22.80 24.00 29.00 8610M121751D 67,30 10.30 12.00 19.00 8610M1217515D 80,30 16.30 18.00 25.00 12.50 8610M121752D 102,80 22.30 24.00 31.00 8610M141251D 80,60 12.80 14.00 20.00 50 8610M1412515D 123,50 19.80 21.00 27.00 14.40 8610M141252D 165,70 26.80 28.00 34.00 8610M142001D 139,30 12.00 14.00 22.00 8610M1420015D 148,20 19.00 21.00 29.00 14.50 8610M142002D 205,40 26.00 28.00 36.00 8610M162001D 120,10 14.00 16.00 24.00 8610M1620015D 150,10 22.00 24.00 32.00 16.50 25 8610M162002D 181,30 30.00 32.00 40.00 8610M182501D 362,50 15.50 18.00 28.00 8610M1825015D 435,00 24.50 27.00 37.00 18.75 8610M182502D 482,30 33.50 36.00 46.00 8610M202501D 244,00 17.50 20.00 30.00 20 8610M2025015D 325,30 27.50 30.00 40.00 20.75 8610M202502D 479,60 37.50 40.00 50.00 Price for 100 pcs. TAPS FOR WIRE THREAD ISERTS ITEM: 8630 For hand or machine use. 01 8630M3X0,5 18,70 8630M4X0,7 18,70 8630M5X0,8 19,10 8630M6X1,0 19,10 8630M8X1,25 21,80 8630M10X1,25 42,30 8630M10X1,50 25,60 8630M12X1,25 47,40 8630M12X1,75 38,20 8630M14X1,25 63,80 8630M14X2,0 54,20 8630M16X2,0 64,50 8630M18X2,5 102,00 8630M20X2,5 129,00.96

MADRELS FOR WIRE THREAD ISERTS ITEM: 8650 01 8650M3X0,5 58,20 8650M4X0,7 47,20 8650M5X0,8 44,40 8650M6X1,0 44,40 8650M8X1,25 44,40 8650M10X1,25 49,60 8650M10X1,5 46,50 8650M12X1,25 49,60 8650M12X1,75 46,50 8650M14X1,25 87,40 8650M14X2,0 87,00 8650M16X2,0 87,00 8650M18X2,5 118,30 8650M20X2,5 118,30 THREAD ISERTS REPAIR KITS ITEM: 8670 Supplied in plastic case. One dimensional. 01 8670KM03050 87,40 8670KM04070 72,50 8670KM05080 72,50 8670KM06100 72,50 8670KM08125 73,20 8670KM10125 93,40 8670KM10150 82,20 8670KM12125 100,10 8670KM12175 94,90 8670KM14200 163,00 THREAD ISERTS REPAIR KITS ITEM: 8690 Supplied in plastic case. Multi dimensional. 01 8690KITMULTI 335,20.97

YLO ACHOR SX MODEL, WITH RIM AD SCREW The 4-way expansion provides the optimum force distribution in the material, and offers high load-bearing capacities in solid and hollow building materials. The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster. The pronounced rim prevents the plug from slipping into the drill hole, thus allowing for a simple installation. hollow building materials, aerated concrete and to bridge plaster Building materials concrete, perforated sand-lime brick, solid sand-lime brick, natural stone with dense structure, aerated concrete, solid panel made from gypsum, solid brick made from lightweight concrete, solid brick. 01 820505 12,26 5 35 25 5 100 820506 13,04 6 40 30 10 820508 19,23 8 50 40 50 820510 46,33 10 70 50 25 UIVERSAL PLUG FU WITH RIM AD SCREW The universal operating principle (knotting or expanding) allows for use in all solid, hollow and board building materials. Thus the FU is the correct choice for unknown base materials. The FU's angled connection ridges allow for optimum screw guidance. Serrated anti-rotation locks prevent rotation in the drill hole. This guarantees the greatest possible installation safety. Fixing sets with screws, eye screws and hooks provide the right solution for all applications. Building materials 01 82070635 23,14 45 35 6 82070645 26,44 55 45 10 100 820708 31,41 8 60 50 50 820710 52,07 10 70 60 20 25.98

BRASS FIXIG PO installation safety. Building materials Concrete and natural stone with dense structure. 01 M 821006 0,36 8 30 24 24 821008 0,46 10 40 30 30 821010 0,71 12 45 35 35 821012 1,37 15 50 40 40 100 HEAVY-DUTY ACHOR TA M-S MODEL WITH TE SCREW The optimized geometry minimise setting energy and allows for use in extremely narrow spaces. This allows for userfriendly installation. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use. The red plastic cap protects against soiling and thus ensures free-running of the thread. Versions zinc-plated steel. Building materials Approved for concrete C20/25 to C50/60, noncracked, also suitable for concrete C12/15 natural stone with dense structure. 01 821506 1,12 10 65 49 10 821508 1,42 12 70 56 50 821510 2,23 15 90 69 20 25 821512 3,15 18 105 86 25 20.99

HEAVY-DUTY ACHOR SLM WITH SCREW TE 8.8 The optimized geometry minimizes setting energy and allows for use in extremely narrow spaces. This allows for userfriendly installation. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use. The red plastic cap protects against soiling and thus ensures free-running of the thread. Building materials Approved for, concrete C20/25 to C50/60, non-cracked. Also suitable for, concrete C12/15 natural stone with dense structure. 01 822006 1,32 12 60 45 10 50 822008 1,67 14 65 50 822010 2,84 16 80 60 25 20 822012 4,21 20 95 75 20.100

BOLT ACHOR ZIC-PLATED STEEL anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation. The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment. Building materials Approved for concrete C20/25 to C50/60, non cracked Also suitable for concrete C12/15 and natural stone with dense structure 01 M 822508005 0,57 61 66 822508010 0,57 66 71 822508020 0,63 8 76 81 822508030 0,71 86 91 822508050 0,71 106 111 50 822510010 0,81 78 86 822510020 0,96 88 96 822510030 0,93 98 106 10 822510050 0,96 118 126 822510070 1,54 138 146 822510100 1,93 168 176 20 822512010 1,22 95 106 822512020 1,34 105 116 10 12 822512030 1,47 115 126 20 822512050 1,54 135 146 822516025 2,28 129 145 822516050 3,41 154 170 16 822516080 4,57 184 200 822516100 5,39 204 220 10 822520030 6,39 165 187 822520060 7,41 20 195 217 822520080 8,17 215 237.101

BOLT ACHOR FAZ II MODEL smaller anchor plates are required. reinforcement hits. This allows for a noticeably quicker installation. Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process. The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (sismic). Building materials Approved for concrete C20/25 to C50/60, cracked. Concrete C20/25 to C50/60, non-cracked. Also suitable for concrete C12/15, natural stone with dense structure. 01 823008010 0,96 65 75 8 823008050 1,44 105 115 823010010 1,37 85 95 10 823010050 1,93 125 135 823012010 1,83 100 110 823012020 2,09 110 120 12 823012030 2,43 120 130 823012050 2,94 140 150 823016025 4,37 135 148 823016050 5,33 16 160 173 823016100 6,55 210 223 1) Approved for sismicperformance category C1 according to ETA-05/0069 50 20 10.102

LOBE KOBS - 8700 ITEM: 8700 and greases, polished zinc-plated steel stud. 01 D L 870025510 1,30 10 M5 870025516 1,31 16 870025616 1,30 25 21 15 9 870025620 1,30 20 870025630 1,31 30 M6 870030616 1,65 16 870030620 1,65 20 870030635 1,68 32 23 19 11 35 870030820 1,71 20 870030830 1,71 30 870040816 1,97 16 870040825 2,09 25 40 27 21 12 M8 870040835 2,15 35 870040845 2,17 45 870050830 2,42 30 870050840 2,43 40 8700501030 2,55 50 33 25 14 30 8700501040 2,72 40 8700501050 2,77 50 M10 8700601030 3,22 30 8700601040 3,26 40 8700601050 3,32 60 37 27 17 50 8700601230 3,48 30 M12 8700601240 3,49 40 ITEM: 8710 and greases, brass bushing with threaded hole. h l1 h d1 d2 d d d1 d D 0,3 l l2 L D 0,3 l2 L 01 D L 8710254 1,30 25 21 15 9 M4 10 8710305 1,69 M5 32 23 19 11 8710306 1,82 M6 12 8710406 2,15 40 27 21 12 8710408 2,16 13 M8 8710508 2,63 20 50 33 25 14 87105010 2,63 M10 17 87106010 3,30 60 37 27 17 87106012 3,49 M12 20.104

FIXED HADLES - 8720 ITEM: 8720 and greases, polished zinc-plated steel stud. l 0,3 L D d1 d 01 L D 872040616 1,43 40 18 15 M6 16 872050825 1,83 50 21 17 M8 25 8720801016 2,62 16 80 26 21 M10 8720801030 2,62 30 87201001216 4,14 16 102 31 25 M12 87201001230 4,26 30 REVOLVIG HADLES - 8730 ITEM: 8730 greases and other chemical agents, polished steel pin with hexagonal socket at the threaded end. h L D d1 d s 01 L D 8730406 2,84 40 18 M6 3 8730506 3,15 13 50 21 8730508 3,19 8730658 3,58 65 23 M8 4 15 8730808 3,92 80 26 87308010 3,92 M10 17 873010010 5,26 5 102 31 873010012 6,67 M12 20 SMOOTH KOB HADLES - 8745 ITEM: 8745 oils and greases, brass bushing with threaded blind hole. 01 D L 87450256 0,94 M6 10 25 22,5 87450258 0,99 M8 16 87450305 0,90 15 M5 10 87450306 1,15 30 28 M6 87450308 1,01 M8 16 874504010 1,49 40 37 37 M10 18 874505010 2,52 50 46 46 874505012 2,96 M12 27.105

HADLES - 8750 ITEM: 8750 and greases, threaded blind hole. L D d1 d l1 01 L D 8750406 1,21 40 24 14 M6 25 8750508 1,43 M8 47 29 16 28 87505010 1,43 M10 87506010 1,74 60 35 19 35 87506012 1,74 M12 l SPOKED HADWHEELS - 8760 ITEM: 8760 Black reinforced, highly resistant Duroplast body with polished uncovered front end, not drilled. D d2 l2 L B l 01 D L B 8760100 9,52 98 40 14 24 20 36 12 8760125 10,01 124 45 18 8760160 15,07 157 50 22 32 24 38 15 8760200 22,11 198 56 24 40 31 43 d1 SPOKED HADWHEELS WITH REVOLVIG HADLE - 8770 ITEM: 8770 Black reinforced, highly resistant Duroplast body with polished uncovered front end, not drilled. B l2 l HADLES - 8755 ITEM: 8755 Material phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents. 01 L F B 8755140 6,07 138 117 M8 13 30 20 D d2 R m L H 01 D L B 8770100 13,97 98 40 14 40 M6 37 24 20 36 12 8770125 15,01 124 45 18 50 47 M8 8770160 20,72 157 50 22 32 24 38 65 59 15 8770200 30,12 198 56 24 40 31 43 80 M10 76 d1.106

ADJUSTABLE HADLES - 8780 ITEM: 8780 element, resistant to solvents, oils, greases and other chemical agents, burnished steel stud, black galvanised steel retaining screw, AISI 302 return spring. 01 L D 878040516 2,18 16 M5 878040520 2,18 20 878040616 2,18 16 878040620 2,19 42 50 18 32 36.5 29 6 14 12 20 878040625 2,24 25 878040630 2,27 30 878040640 2,27 M6 40 878063620 2,55 20 878063625 2,58 25 878063630 2,62 30 878063640 2,68 40 878063820 2,55 63 73 23 43 47 36 8 17 15 20 878063825 2,58 25 878063830 2,60 M8 30 878063840 2,65 40 878063850 2,81 50 8780801025 3,27 25 8780801030 3,34 30 80 92 28 54 59.5 45 10 22 19 M10 8780801040 3,44 40 8780801050 3,59 87801001250 6,27 100 114 33 65 70.5 53 12 25 25 M12 50 ADJUSTABLE HADLES - 8790 ITEM: 8790 element, resistant to solvents, oils, greases and other chemical agents, burnished steel bushing with threaded blind hole, AISI 302 return spring. 01 L D 8790405 2,10 M5 42 50 18 32 36.5 29 6 14 12 10 8790406 2,10 M6 8790636 2,40 63 73 23 43 47 36 8 17 15 12 8790638 2,40 M8 8790808 3,10 80 92 28 54 59.5 45 10 22 19 17 87908010 3,10 M10 879010012 5,30 100 114 33 65 70.5 53 12 25 25 M12 20.107

POLISHED IRO STRAPS ITEM: 9100 Breaking load 70/75 Kg/mm², rounded edges, oiled surface, individually wrapped roll. 910013 910016 910019 01 3,10 3,10 3,10 2 32 40 44 Advertised price is per kg. HIGH-RESISTACE BLUE IRO STRAPS ITEM: 9115 Breaking load 80/85 Kg/mm², rounded edges, waxed surface. 911516 911519 01 4,10 4,10 24 27 Advertised price is per kg. SEALS FOR STEEL STRAPS ITEM: 9130 Polished steel. 913013SM 913016SM 913020SM 01 22,40 23,50 29,10 13 16 2000 Advertised price is for 1000 pcs. PLASTIC STRAPS ITEM: 9150 Breaking load 28/32 Kg/mm², black polypropylene, embossed surface. 91501206F62 91501506F62 91501206F400 91501208F400 91501506F400 91501508F400 01 3,60 4,60 3,60 3,80 3,80 5,70 62 400 750 600 3000 2000 1500 Advertised price is for 100 m. SEALS FOR PLASTIC STRAPS ITEM: 9160 Chased burnished steel. 916013SP 916016SP 01 20,60 25,75 12 15 2000 Advertised price is for 1000 pcs..108

COMPOSITE POLYESTER STRAPPIG ITEM: 9285 Manufactured from high tenacity twisted polyester yarns embedded in resin coating. Compact structure to facilitate feeding under pallets and through container hooks, featuring good angle cutting resistance also without angle/edge guards, high retain tension and shape under extreme weather conditions shock absorbent, UV and water protected,will not rust or rot in the event of moist, its operating temperature range may vary from -40 up to +100 C, perfectly adapts to the load shape,will not scratch or mark product surface. strapping, steel threaded buckles, providing the strongest and most reliable join the cargo strapping industry. Compliant with pean Railway Regulation B 918 090. 928519 928525 928532 01 130,00 150,00 150,00 19 25 32 625 925 1500 1000 1480 2400 500 740 1200 200 500 300 BLR = Breaking Load Ribbon BLRB = Breaking Load Ribbon + Buckle MSL = Maximum Safety Load POLYESTER STRAPPIG STEEL THREADED HOOKS ITEM: 9287 928719 928725 928732 01 72,50 101,00 87,00 19 25 32 1 1.000 - pc packaging BATTERY STRAPPIG TOOL ITEM: 9288 Battery strapping tool with brushless motor, tension and vibration sealing. For 92881216 model it is recommended to use PP-PET straps from 13-16 mm, thickness 0,5-1,05 mm. For 92881619 model it is recommended to use PP-PET straps from 16 mm, thickness 0,8-1,05 mm and ET from 19 mm, thickness 0,7-1,27mm.1 battery and e 1 charger included. 92881216 92881619 01 2.936,00 3.595,00 12 12 80% 80% 3,8 3,8 STRAP STRETCHERS FOR METALLIC STRAPS WITH SEAL ITEM: 9200 Simultaneous strap-cutting and seal-closing operation. 9200101316 92001820 01 357,00 550,80.109

STRAP STRETCHERS FOR METALLIC STRAPS WITHOUT SEALS ITEM: 9210 Interlocking closing system and strap cutting, easy adjustment to the desired size, the resistance of the closure without seal is higher than the one with seal and greatly reduces the execution time. 921013161920 01 994,50 STRAP STRETCHERS FOR PLASTIC STRAPS WITH SEAL ITEM: 9220 Long lever for reduced closing effort. 92201215 01 144,00 13 ITEM: 9230 Long lever of pressed steel and with anatomic handles, reduced closing effort and excellent grip comfort. 923015 01 196,00 16 MAUAL POLYESTER STRAP TESIOER ITEM: 9296 Manualtensioners allow operators to bring polyester strap to desired tension. 9296T50 01 680,00 STRAP HOLDERS FOR METALLIC STRAP ITEM: 9255 92551316 92551820 01 107,10 107,10.110

STRAP HOLDERS FOR PLASTIC STRAPS ITEM: 9270 9270F400 01 163,20 STRAP HOLDERS FOR PLASTIC STRAPS ITEM: 9280 9280F62 01 56,10 POLYESTER STRAPPIG DISPESER ITEM: 9290 Mobile wheeled dispenser to store your strapping tools and accessories together for easy mobility and use, extra sturdy heavy-duty cart, large wheels for easy of rolling over rough ground or gravel. Strapping brake keeps the strapping from unwinding, Tool tray on top to hold your strapping tools and closures hand and in one place. 929000 01 273,00 200 POLYESTER STRAP SHEARS ITEM: 9291 Dual-blade, ergonomically designed, safety strap shears, 2 blades (smooth and serrated), ultra precise, fray free Advanced fulcrum for greater cutting force. Advanced fulcrum for greater cutting force. 929100 01 14,00.111

MAUAL POLYESTER STRAP TESIOER ITEM: 9295 Manualtensioners allow operators to bring polyester strap to desired tension. 9295T25 01 235,00 TRASPARET STRETCH FILMS ITEM: 9300 Four-coil pack each equipped with a plastic distributor and a rubber holding handle. High elastic properties and puncture 9300100/4 01 34,70 23 100 200 ITEM: 9310 Thirty-coil pack with one plastic distributor and a rubber holding handle. 9310100/30 01 116,90 23 100 200 TRASPARET STRETCH FILMS ITEM: 9320 Six-coil pack, high elastic properties and puncture resistance, suitable for a broad range of packaging needs. 9320500/6 01 50,80 23 500 50 2.5 ITEM: 9370 Single coil. 937023500 937030500 937035500 01 21,45 23,15 24,10 23 30 35 500 75 5 HADLES FOR STRETCH FILMS ITEM: 9340 For coils with a 50 mm hole. 9340MA 01 7,20.112

COLOURED STRETCH FILMS ITEM: 9350 Four-coil pack, high elastic properties and puncture resistance, suitable for a broad range of packaging needs. 9350BIACO 9350ERO 01 109,20 109,20 30 500 75 4 DISTRIBUTORS FOR STRETCH FILM COILS ITEM: 9360 for coils of 500 mm height and with 38-50 - 75 mm hole. 9360DIST 01 75,50 BOX SBALIG TAPES ITEM: 9400 Silent polypropylene suitable for all packing and packaging needs. 9400AV 9400TRASP 9400BIACO 01 1,71 1,71 1,71 50 66 9400132AV 9400132TRASP 9400132BIACO 01 3,37 3,37 3,37 50 132 ADHESIVE MASKIG TAPES ITEM: 9410 Paper, suitable for covering and marking out areas for painting operations. 941019 941025 941030 941038 941050 01 2,14 2,86 3,47 4,23 4,95 19 25 30 38 50 50.113

ADHESIVE ISULATIG TAPES ITEM: 9420 Black PVC, suitable for insulating and protecting electric components. 942015 942019 01 2,65 3,70 15 19 25 ADHESIVE FABRIC-REIFORCED TAPES ITEM: 9430 Reinforced, high adherence, waterproof, suitable for packing, repairing, joining and protecting a wide range of materials. Silver. 943050/25 01 3,47 50 25 ADHESIVE FABRIC-REIFORCED TAPES ITEM: 5080 Triple-layer highly tear resistant and waterproof up to four atmospheres, temperature resistant from -10 C to +70 C, suitable for high-sealing emergency repair. Silver. 944050/50 01 22,00 50 50 TAPE STRETCHERS ITEM: 9450 Plastic body, adjustable clutch, suitable for tapes with a height of up to 50 mm. 9450S50 01 11,60.114

PROTECTIVE TUBULAR ETS ITEM: 9500 Resistant to acids and solvents, suitable for protecting tools and mechanical parts in general. 95001020 95002050 95004060 95005075 950070100 01 0,35 0,37 0,68 0,82 1,01 YELLOW 200 POLYTHEE AIR BUBBLE ROLLS ITEM: 9520 High shock-absorbing quality, resistant to impacts and tearing, suitable for wrapping and protecting objects of any shape and size, odour-free and chemically neutral, can also be used for protecting food products. 95201000 95201250 01 257,00 314,00 1.0 1.25 23 30 The price refers to the sale of 1kg of product. CARDBOARD SHIPPIG BOXES ITEM: 9520 Double wave. 9560230 9560280 9560330 9560425 9560600 9560800 01 1,75 1,85 1,95 2,15 8,65 15,00 * compatible in size with the chipboard pallet WOODE CHIPBOARD PALLETS ITEM: 9575 9575600 9575800 01 6,60 9,70.115