11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 1.6 Gal/rev.5 Pumphead Absorbed Power (HP).4.3.2.1 175 psi 72.5 psi psi CSM EPDM 1/14 12/16 14/175 16/195 18/215 Product temperature limitations ( F) 1 2 3 4 5 6 7 8 9 1 Pump Speed (rpm).6.12.18.24.3.36.42.48.54.6 Rate (GPM) (HP) High Pressure (SP) Standard Pressure SP Intermittent use HP Intermittent use Description Material Description Material Pump housing Cast Steel ASTM A216: WCB (RAL 618 - Green) Torque arm EN125 Structural Steel (RAL 721) Front cover Polycarbonate Bearing Stainless Steel Grade EN1.4125 (44c) Cast Aluminum A356.1 Option: Cast Iron ASTM A48 class 4B Shaft seal Option: Viton, PTFE Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant Flange coating option Halar Anti-Corrosion coating Hose, Option:, EPDM & CSM Base frame Powder Coated Mild Steel (RAL 735 - Grey) Weight - Complete pump including drive Inverter (Optional) 42 lbs 6½ lbs
11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 1 General Assembly Drawing 4.4" 15.4" 6.3".6" Suitable for M8 / 1 4" fi xing bolts 3.6" 2.1" 8" 8.7" 2.1" Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderflex distributor. Standard Pump Configurations (Including Natural Rubber hose) GPM Pump Speed RPM Installed Motor Power HP Std (for up to 9 PSI HP (for up to 115 PSI.8 13 1 8 137. 137.1.11 18 1 6 137.1 137.11.14 22 1 5 137.2 137.12.17 28 1 4 137.3 137.13.21 34 1 3 137.4 137.14.26 42 1 3 137.5 137.15.34 56 1 2 137.6 137.16.41 67 1 2 137.7 137.17.52 84 1 2 137.8 137.18 Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling. Dura pumps for discharge pressures over 115 PSI are available to special order D1 - DSG - OCT7
11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 15.2 Gal/rev.7 Pumphead Absorbed Power (HP).6.5.4.3.2.1 175 psi 72.5 psi 43.5 psi psi CSM EPDM 1/14 12/16 14/175 16/195 18/215 Product temperature limitations ( F) 1 2 3 4 5 6 7 8 9 1 Pump Speed (rpm).2.4.6.8 1 1.2 1.4 1.6 1.8 2 Rate (GPM) (HP) High Pressure (SP) Standard Pressure SP Intermittent use HP Intermittent use Description Material Description Material Pump housing Cast Steel ASTM A216: WCB (RAL 618 - Green) Torque arm EN125 Structural Steel (RAL 721) Front cover Polycarbonate Bearing Stainless Steel Grade EN1.4125 (44c) Cast Aluminum A356.1 Option: Cast Iron ASTM A48 class 4B Shaft seal Option: Viton, PTFE Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant Flange coating option Halar Anti-Corrosion coating Hose, Option:, EPDM & CSM Base frame Powder Coated Mild Steel (RAL 735 - Grey) Weight - Complete pump including drive Inverter (Optional) 66 lbs 6½ lbs
11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 15 General Assembly Drawing 6.4" 18." 7.1".7" Suitable for M1 / 3 8" fi xing bolts 3.8" 2.5" 1.1" 1.9" 2.5" Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderflex distributor. Standard Pump Configurations (Including Natural Rubber hose) GPM Pump Speed RPM Installed Motor Power HP Std (for up to 9 PSI HP (for up to 115 PSI.26 13 1 4 137.1 137.11.36 18 1 3 137.11 137.111.44 22 1 3 137.12 137.112.56 28 1 2 137.13 137.113.68 34 1 2 137.14 137.114.84 42 1 2 137.15 137.115 1.12 56 3 4 137.16 137.116 1.35 67 3 4 137.17 137.117 1.69 84 1 137.18 137.118 Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling. Dura pumps for discharge pressures over 115 PSI are available to special order D15 - DSG - OCT7
11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 25.7 Gal/rev 2.4 Pumphead Absorbed Power (HP) 2. 1.6 1.2.8.4 175 psi 72.5 psi 43.5 psi psi CSM EPDM 1/14 12/16 14/175 16/195 18/215 Product temperature limitations ( F) 1 2 3 4 5 6 7 8 9 1 Pump Speed (rpm).75 1.5 2.25 3 3.75 4.5 5.25 6 6.75 7.5 Rate (GPM) (HP) High Pressure (SP) Standard Pressure SP Intermittent use HP Intermittent use Description Material Description Material Pump housing Cast Steel ASTM A216: WCB Torque arm EN125 Structural Steel (RAL 721) (RAL 618 - Green) Front cover Polycarbonate Bearing Stainless Steel Grade EN1.4125 (44c) Cast Aluminum A356.1 Option: Cast Iron ASTM A48 class 4B Shaft seal Option: Viton, PTFE Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant Flange Stainless Steel Grade EN.14571(316) Verdersil - Silicon based lubricant Flange coating option Halar Anti-Corrosion coating Hose, Option:, EPDM & CSM Base frame Powder Coated Mild Steel (RAL 735 - Grey) Weight - Complete pump including drive Inverter (Optional) 18 lbs 6½ lbs
11 Gateway Drive Macon, Georgia 3121 Verderflex Dura 25 General Assembly Drawing 8.9" 3.1" 22.1" 1.9" 11.8" 9.4".8" Suitable for M1 / 3 8" fi xing bolts 3.4" 5.4" Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorized Verderflex distributor. Standard Pump Configurations (Including Natural Rubber hose) GPM Pump Speed RPM Installed Motor Power HP Std (for up to 9 PSI HP (for up to 115 PSI.98 13 1 2 137.2 137.21 1.35 18 1 2 137.21 137.211 1.65 22 3 4 137.22 137.212 2.1 28 3 4 137.23 137.213 2.55 34 1 137.24 137.214 3.15 42 1 1 4 137.25 137.215 4.2 56 1 1 2 137.26 137.216 5.3 67 2 137.27 137.217 6.31 84 2 137.28 137.218 Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling. Dura pumps for discharge pressures over 115 PSI are available to special order D25 - DSG - OCT7
Verderflex Dura 35 4..1725 US Gallon/rev Pumphead RMS Absorbed Power (HP) 3.5 3. 2.5 2. 1.5 1..5 1 174 psi 87 psi psi 2 3 4 5 6 7 8 9 1 11 12 13 14 2 4 6 8 1 12 14 16 18 2 22 24 CSM/ EPDM 1/14 12/16 14/175 16/195 18/215 Product Temperature Limitations (ºF) Pump Speed (rpm) (US GPM) Continuous (Verderlube) Continuous (Verdersil) Intermittent min 1hr running 1 hr stopped Intermittent min 1hr running 2 hr stopped Description Material Description Material Pump housing Cast Iron GG25 Torque arm EN125 Structural Steel (RAL 721) (RAL 618 - Green) Front cover Powder Coated Steel (RAL 721 - Black )with Polycarbonate Inspection Window Bearing Cast Iron GG25 Shaft seal Viton Option: PTFE Stainless Steel Grade EN1.4125 (44c) Drive shaft EN24T Steel Lubricant Verderlube - Glycerine based lubricant Flange Stainless Steel Grade EN.14571(316) Universal to suit DN32 DIN PN16, 1¼, ANSI 15# 32 mm and JIS 1k Optional Verdersil - Silicone based lubricant Optional Flange Materials Polypropylene (PP) and Polyvinylidene (PVDF) Hose Option:, EPDM & CSM Base frame Powder Coated Mild Steel (RAL 721 - Grey) Weight -Complete pump including drive 276 #
Verderflex Dura 35 General Assembly Drawing 19.33" O/ALL WIDTH 1.9" CTRS 26.4" O/ALL HEIGHT 12.8" O/ALL DEPTH.63" 1.94" SLOT CTRS 14.64" 17.63" Suitable for ½ M12 Fixing Bolts 3.6".5" SLOT.63" 13.31" SLOT CTRS 14.64" 17.63" Please Note: These GA drawings are for guidance only. For mounting drawings please contact an authorised Verderflex distributor. Standard Pump Configurations (Including Natural Rubber hose) GPM l/hr Pump Speed RPM Std (for up to 6 Bar discharge pressure) HP (for up to 12 Bar 1.9 431 11 137.32 137.33 2.6 588 15 137.321 137.331 3.1 76 18 137.322 137.332 4. 92 23 137.323 137.333 4.8 1,98 28 137.324 137.334 6. 1,372 35 137.325 137.335 8.1 1,842 47 137.326 137.336 9.7 2,195 56 137.327 137.337 12. 2,744 7 137.328 137.338 16. 3,646 93 137.329 137.339 24. 5,488 14 137.32A 137.33A Standard order options include NEMA 4 protection, ATEX compliant pumps, thermistors and forced fan cooling. www.verderflex.com VERDER Ltd Whitehouse Street, Hunslet, LEEDS, LS1 1AD Tel: +44 ()113 222 25 Fax: +44 ()113 222 291 info@verderflex.com Affiliated companies: A Wien B Aartselaar CZ Praha D Haan F Eragny s/oise GB Leeds H Budapest JPN Tokyo NL Groningen/Vleuten PL Katowice RO Bucaresti SA Johannesburg USA Newtown