COMMERCIAL RETROFIT DOWNLIGHTS

COMMERCIAL RETROFIT DOWNLIGHTS

The industry s first universal listed commercial retrofit downlight. Unique and simple energy efficient solutions for existing construction.

C O N T E N T S 3 4 5 6 10 11 12 13 14 15 16 17 23 An introduction to Retroficient Modular Design Exclusive 5-Axis J-Box Installation RD6LED Prescolite LED Features RLF6LED/RLF8LED Inside the LED Module 6 & 8 horizontal CFL downlight 6 & 8 vertical CFL downlight W/FT 2 Catalog Logic Photometrics 1 www.prescolite.com

2

An industry first To address the huge market potential for commercial retrofit projects, Prescolite has developed Retroficient, the industry s first universal listed commercial retrofit downlight. Retroficient provides an easy, cost effective way to upgrade any competitive commercial housing to more energy efficient sources in existing spaces. In fact, in less than five minutes you can install a product that is a great solution for retrofit projects, while adding unparalleled optical value to the application. Available with LED and CFL options Retroficient offers: Energy savings for building upgrades Award-winning Watts Per Square Foot optics Quick-Link socket cup for easy assembly Quick and easy installation that can be done from below the ceiling The best solution for green retrofit applications 3 Additionally, its universal configuration is simple to specify as a better alternative to self-ballasted compact fluorescent lamps. www.prescolite.com

Modular Design Ballasted Whip Assembly reflector (order seperately) 4 universal flange ring Slide bars Fully Assembled Modular Design Retroficient features a modular design that is composed of individually distinct units that can be easily assembled. Additionally, the Quick-Link socket cup offers user-friendly installation benefits.

DESIGN FEATURES Exclusive 5-Axis J-Box 5 Exclusive 5-Axis J-Box To accommodate for obstacles that might be above the ceiling, the orientation of Prescolite s patent-pending tooless j-box is very flexible. It includes 5 Axis points and an arm that allows for full range of movement. www.prescolite.com

Retroficient is Fast and Simple to Install In less than five minutes and 6 simple steps you can install a product that is a great solution for retrofit projects. 1 Make Wire Connections 6 2 Install Supply Wires To J-Box 3 Reinstall Ballast Cover Plate

INSTALLATION 4 Mount Housing Assembly Into The Aperture *Note: The SD housing option for small diameter apertures installs differently. See www.prescolite.com for installation instructions for this option. 7 www.prescolite.com

5 Secure Housing into Ceiling with Slide Bars 8

INSTALLATION CONTINUED 6 Install Lamp and Reflector 9 www.prescolite.com

Retroficient LED Downlight RD6LED 10 Designed to upgrade existing downlight apertures to higher energy efficient, LED sources. Photometrics per IESNA-LM-79-2008 standards Available in 4 optical distributions, 4 Kelvin temperatures and 3 CRIs. Provides minimum 50,000 hours of life expectancy at 70% lumen maintenance Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non-IC rated Also available with Advance and Lutron dimming options Factory configurable optics allows for a variety of different applications REFLECTOR COLOR CLEAR ALZAK CHAMPAGNE GOLD ALZAK PEWTER ALZAK WHEAT ALZAK LIGHT WHEAT ALZAK BLACK ALZAK WHITE REFLECTOR FINISH SPECULAR SEMI-SPECULAR AMERICAN MATTE

LED 5 3 1 6 2 4 Prescolite LED Features 1 2 LED LIGHT ENGINE The heart of LED lighting is the LED light engine, an integrated reflector array of LEDs designed around each LED to produce a uniform distribution. PARABOLIC LED REFLECTOR MODULES The LED light engine features ten parabolic LED reflector modules. Each incorporates a patented application of Prescolite s American Matte finish to produce uniform illumination. 11 3 4 5 6 DIE CAST ALUMINUM HEAT SINK The LED light engine is mounted directly to a heavy aluminum heat sink, engineered to dissipate the heat generated by the LED array to ensure optimal life and lumen maintenance. REFLECTOR High purity spun aluminum Alzak reflector provides a glare-free ceiling appearance. REFLECTOR VENTING Upper reflector is vented above the LED light engine for thermal management of the LED array. REFLECTOR RETENTION Reflector/LED light engine assembly is easily installed and retained by a single, tamper-resistant screw. Tool included. LED HEAT SINK Although LEDs generally operate cooler than conventional light sources, the heat they produce can dramatically affect their life if not properly vented. Prescolite LED lighting fixtures feature highly engineered die cast aluminum heat sinks mounted directly to the top of the LED light engines to efficiently dissipate heat. This assures the 50,000 * hour life of the LED is achieved. * At 70% of rated light output. www.prescolite.com

Designed for optimal life and lumen maintenance, Prescolite has added the RLF6LED and RLF8LED, a 6" and 8" commercial retrofit downlight with remote phosphor technology to it s Retroficient line. RLF6LED/RLF8LED Available in three different color temperatures, 3000K, 3500K and 4000K, the LF6LED also features the following benefits: 12 SEE REFLECTOR COLORS & FINISHES ON PAGE 10 Dimming comes standard with 0-10V dimming capability. Instant 100% light, flicker-free dimming down to 10%. Contains no mercury 80 CRI Driver is universal - 120V through 277V Smooth beam edge similar to CFL downlights Spacing criterion of 1.2 for general lighting applications Superior brightness control above the 45 degree viewing angle CSA certified to US and Canadian safety standards. Suitable for damp locations. Five year warranty Provides minimum 50,000 hours of life expectancy at 70% lumen maintenance Suitable for wet location Additionally, if critical temperatures are reached on the driver or LED module, an integrated thermal feedback loop will gradually reduce current to protect its system life. Thermal management High efficiency heat sink Designed to dissipate heat on three sides, this module level heat sink facilitates heat transfer away from the LEDs to external heat sink for natural convection. The thermal management system keeps the module well within thermal specifications to ensure maximum lumen output and long life. The thermal feedback loop capability of LiteFrame LED offers inherent protection for the electrical components of the driver and LED module. When ambient temperatures rise above limits (approximately 50º C) that might jeopardize the integrity of these components, the unit will dim down to levels to reduce its operating heat. This ensures the 50,000 hour life of the product at 40º C and allows for the 5 year warranty of the product. ISO View

Inside the LED Module Remote phosphor LED technology Remote Phosphor Offering high-quality white light with high efficiencies, Philips Fortimo LED DLM module uses a plain PCB with royal blue LEDs and a remote phosphor film layer. The distance from the LED source to the phosphor film, lowers the heat exposure on the phosphor. This ensures the absence of color shift over time. LED board Thermal Interface material Highly reflective bottom of mixing chamber Offering consistency between fixtures and consistent color over time the refraction of the lens provides perfect uniformity. Custom optic features also include: CFL-like distribution and beam edge Superior brightness control Increased efficiency and wide spacing benefits Housing & Highly reflective wall of mixing chamber Remote Phosphor diffuser 13 Additionally, the mixing chamber has higher efficacy due to larger portion of lumens exiting the diode and aids in color distribution and uniformity. Philips Fortimo Remote phosphor technology LED modules use high brightness royal blue LEDs White light achieved when illuminating remote lens with phosphor film layer Remote location of lens exposes phosphor to less heat, increasing life and color quality Offers increased efficiency and better uniformity and color consistency Less susceptible to heat degradation than traditional LEDs with integral phosphor coating www.prescolite.com

Retroficient CFL Downlights RLF6CFH 14 Ideal for upgrading applications to higher energy efficient, CFL sources in existing apertures Electronic ballast with end of life protection and 120-277V universal voltage Multiple dimming options (Lutron, Advance) & Osram ballast option Utilizes Prescolite s award winning WFT2 Optics Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non-IC rated. Wet location listed when used with lensed trims RLF8CFH Ideal for upgrading applications to higher energy efficient, CFL sources in existing apertures Electronic ballast with end of life protection and 120-277V universal voltage Multiple dimming options (Lutron, Advance) & Osram ballast option Utilizes Prescolite s award winning WFT2 Optics Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non-IC rated. Wet location listed when used with lensed trims

CFL RLF6CFV Ideal for upgrading applications to higher energy efficient, CFL sources in existing apertures Electronic ballast with end of life protection and 120-277V universal voltage Multiple dimming options (Lutron, Advance) & Osram ballast option Utilizes Prescolite s award winning WFT2 Optics Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non- IC rated. Wet location listed when used with lensed trims 15 RLF8CFV Ideal for upgrading applications to higher energy efficient, CFL sources in existing apertures Electronic ballast with end of life protection and 120-277V universal voltage Multiple dimming options (Lutron, Advance) & Osram ballast option Utilizes Prescolite s award winning WFT2 Optics Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non- IC rated. Wet location listed when used with lensed trims www.prescolite.com

Comply with industry standards with Watts Per Square Foot Optics With new, more aggressive mandates for energy conservation in existing facilities, as well as an increased emphasis on the importance of energy-efficient lighting sources, Prescolite s Retroficient products can be a great fit to meet requirements for: ARRA federal stimulus dollars LEED certified projects ASHRAE California Title 24 16 watts per square foot optics The Retroficient collection uses Prescolite s exclusive Watts Per Square Foot Optics reflectors for use with compact fluorescent sources, which feature more lumens per watt, high fixture efficacies, and energy-saving benefits uniformity wide spacing high efficiency High Fixture efficacy 60 Degree Cutoff Brightness Control shallow overall height stocked for immediate shipment Corridor Retrofit Y Z X 65W BR30 to WFT2 Optics 40 X 6 X 9 ; 80/50/20 refl 6 downlights 65W BR30 (6 32W V) (6 26W V) Avg. 16.1 fc Avg. 22.7 fc Avg. 18.9 fc Watts 390 Watts 198 Watts 166 W/FT 2 1.6 W/FT 2 0.8 W/FT 2 0.7

Designed to upgrade existing downlight apertures to higher energy efficient, LED sources. Photometrics per IESNA-LM-79-2008 standards Available in 4 optical distributions, 4 Kelvin temperatures and 3 CRIs. Provides minimum 50,000 hours of life expectancy at 70% lumen maintenance Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non-IC rated Also available with Advance and Lutron dimming options RD6LED CATALOG LOGIC SPECIFICATION INFORMATION HOUSING ORDERING EXAMPLE: Rd6led3 DM-6d9led335k7FL35SSWT led CRI FINISH BEAM ANGLE REFLECTORS ACCESSORIES Rd6led 3 DM 6D9LED 3 35K 7 ss FL35 WT Housing RD6LED 6 LED Housing LED Generation 3 5 For 14W high efficacy light engine 4 4 For 28W high output light engine Voltage BLANK 120V 277V 277V HOUSING OPTIONS DM 1, 2 0-10V Dimming SD 6 Small Diameter LIGHT ENGINE 6D9LED 6 Light Engine/ Reflector Assembly LED Generation 3 2 For 14W high efficacy light engine 4 3 For 28W high output light engine LED Color temp 27K 2700 Kelvin 35K 3500 Kelvin 40K 4000 Kelvin 50K 5000 Kelvin CRI 7 Nominal 70+ CRI 8 4 Nominal 80+ CRI 9 5 Nominal 90+ CRI Reflector Finish Blank Specular SS Semi- Specular Beam Angle Blank Vacuum metalized reflector with 45º cutoff SP18 Lensed optic with 18º spot distribution and Zet painted faceplate MD25 Lensed optic with 25º medium distribution and Zet painted faceplate FL35 Lensed optic with 35º wide distribution and Zet painted faceplate Reflector Color CG Champagne Gold Alzak BL Black Alzak WE Wheat Alzak LW Light Wheat Alzak PW Pewter Alzak WH White Paint Reflector Options WT White Trim WF 6 Wide Flange Accessories RWD6 6 Retrofit Wide Diameter Housing Kit (6 ) 17 NOTES Housing Compatibility Guide 1120V only (consult technical support) 2 Used with RD6LED3 only 3 Used with RD6LED4 only 4 6D9LED4 only 5 6D9LED3 only 6 See Housing Capability Guide for Hole Diameter Compatibility (page 21) Or d e r i n g Gu i d e l i n e s Re q u i r e s SD Ho u s i n g Op t i o n 6 i n c h m i n m a x 5-15/16 6-1/8 Dimensions shown are for the diameter of the frame flange at it's narrowest point All Standard Housings 6-1/8 6-1/2 Re q u i r e s RWD Kit Ac c e ss o r y & WF 6-1/2 6-7/8 Reflector Option www.prescolite.com

RLF6LED/RLF8LED CATALOG LOGIC Designed to upgrade existing downlight apertures to higher energy efficient, LED sources. Light Engine utilizes remote phosphor technology for controlled color consistency fixture to fixture Universal 120-277V high efficiency LED driver with 0-10V dimming standard Over 50 Lumens per watt delivered Glare free optical control Minimum 50,000 hour at 70% lumen maintenance system life Photometrics tested per IESNA-LM-79-2008 standards Non-IC rated CSA listed for damp locations and through wiring Suitable for wet location SPECIFICATION INFORMATION ORDERING EXAMPLE: RLF6LED 6LFLED530K HOUSING led FINISH REFLECTORS ACCESSORIES RLF6LED 6LFLED5 30K 18 Housing RLF6LED 6" High Efficacy LED Housing with 0-10V Dimming to 10% RLF8LED 8 High Efficacy LED Housing with 0-10V Dimming to 10% Voltage BLANK 120V- 277V HOUSING OPTIONS SD 6 Small Diameter TRIM 6LFLED5 6 Open Reflector/ Light Engine Assembly, Nominal 900 lumen output 8LFLED5 8 Open Reflector/ Light Engine Assembly, Nominal 900 lumen output LED Color temp 30K 3000 Kelvin 35K 3500 Kelvin 40K 4000 Kelvin Reflector Finish Blank Alzak Semi- Diffuse Reflector Color Blank Clear Alzak CG Champagne Gold Alzak BL Black Alzak WE Wheat Alzak LW Light Wheat Alzak PW Pewter Alzak Reflector Options WT White Trim WF Wide Flange Accessories RWD6 1 Retrofit Wide Diameter Housing Kit (6 ) RWD8 1 Retrofit Wide Diameter Housing Kit (8 ) LFSC6 6 reflector screw cover LFSC8 8 reflector screw cover WH 2 White Paint Ordering Guidelines Requires SD Ho u s i n g Op t i o n Housing Compatibility Guide 6 i n c h 8 i n c h m i n m a x m i n m a x 5-15/16 6-1/8 7-15/16 8-1/8 NOTES 1 See housing capability guide for hole diameter compatibility on page 2 2 Requires WT option All Standard Housings 6-1/8 6-1/2 8-1/8 8-3/4 Re q u i r e s RWD Kit Ac c e ss o r y & WF 6-1/2 6-7/8 8-3/4 9-1/8 Reflector Option Dimensions shown are for the diameter of the frame flange at it's narrowest point

Ideal for upgrading applications to higher energy efficient, CFL sources in existing apertures Electronic ballast with end of life protection and 120-277V universal voltage Multiple dimming options (Lutron, Advance) & Osram ballast option Utilizes Prescolite s award winning WFT2 Optics Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non-IC rated. Wet location listed when used with lensed trims RLF6CFH CATALOG LOGIC SPECIFICATION INFORMATION ORDERING EXAMPLE: RLF6CFH132EB 6CFH1 LP32T30K Housing Reflectors Accessories RLF6CFH132EB 6CFH1 LP32T30K Housing RLF6CFH132EB 7 6 (1) 26/32/42W Triple tube, multi-volt electronic ballast (120-277V) RLF6CFH213TWEB 8 6 (2) 13W Osram Twin tube, multi-volt electronic ballast (120-277V) RLF6CFH213EB 8 6 (2) 13W Quad, multi-volt electronic ballast (120-277V) RLF6CFH218EB 8 6 (2) 18W Quad, multi-volt electronic ballast (120-277V) RLF6CFH226EB 8 6 (2) 26W Quad, multi-volt electronic ballast (120-277V) Housing Options SD 3 Small Diameter Housing FSDFA Fuse kit installed at factory RIF1 Radio interference filter (single circuit) MW26 Max Wattage label, 26W MW32 Max Wattage label, 32W SYL 2 Osram Sylvania Electronic Ballast (available only for standard EB option) 347V Contact Technical Support DM Electronic Analog Dimming Ballast to 3%, 4-wire, 0-10V (120-277V) (Specify wattage on two lamp housing) SDM 1 Lutron Compact SE Dimming Ballast to 5% 3-wire (specify voltage and wattage) HDM 5, 6 Lutron Hi-Lume Dimming Ballast to 1% 3-wire (specify voltage and wattage) 2DM 1,6 Lutron Tu-Wire Dimming Ballast to 1% 3-wire (specify voltage and wattage) 7DM Advance Mark 7 Dimming Ballast to 5% 4-wire, 0-10V analog (120V thru 277V) (specify voltage and wattage) XDM 1 Advance Mark 10 Dimming Ballast to 5% 2-wire, line voltage reflector 6CFH1 6 Alzak Semi- Diffuse one lamp 6CFH 6 Alzak Semi- Diffuse two lamp Ordering Guidelines reflector Color BLANK Clear Alzak CG Champagne Gold Alzak PW Pewter Alzak WE Wheat Alzak LW Light Wheat Alzak BB Black baffle (with clear Alzak upper reflector) WB White baffle (with clear Alzak upper reflector) Lens Spray Color Options Blank Painted White CR Clear Alzak CG Champagne Gold Alzak PW Pewter Alzak WE Wheat Alzak LW Light Wheat Alzak Housing Compatibility Guide m i n 6 inch Reflector Options CL Regressed clear Lens PL Regressed prismatic lens DL Regressed diffuse lens FL Regressed fresnel lens WT White Flange (Alzak only) TRG Trim Ring Gasket (Factory installed) WF 3 Wide Flange m a x Requires SD Housing Option 5-15/16 6-1/8 All Standard Housings 6-1/8 6-1/2 Requires RWD Kit Accessory & WF Reflector Option Dimensions shown are for the diameter of the frame flange at it's narrowest point 6-1/2 6-7/8 Accessories LP -wattage= 13, 18, 26, 32, 42 -type= Q4 (Quad 4-pin); TW4 (Twin 4-pin); T4 (Triple 4-pin) -temp= 27K, 30K, 35K, 41K (Kelvin) RWD6 3 Retrofit Wide Diameter Housing Kit (6 ) FSDFI Fuse kit for field installation NOTES 1 Not available for 13W Twin Tube Lamps 2 Available for Osram Sylvania Quick 60+ Limited Warranty when used with Osram lamp(s). See www. prescolite.com for details 3 See Housing Capatibility Guide for Hole Diameter Compatibility (page 22) 4 Specify for lensed trims only 5 Not available for 13W and 18W 6 Not available for 42W 7 Use 6CFH1 reflector 8 Use 6CFH reflector 19 www.prescolite.com

Ideal for upgrading applications to higher energy efficient, CFL sources in existing apertures Electronic ballast with end of life protection and 120-277V universal voltage Multiple dimming options (Lutron, Advance) & Osram ballast option Utilizes Prescolite s award winning WFT2 Optics Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non-IC rated. Wet location listed when used with lensed trims RLF8CFH CATALOG LOGIC SPECIFICATION INFORMATION ORDERING EXAMPLE: RLF8CFH132EB 8CFH1 LP32T430K Housing Reflector ACCESSORIES RLF8CFH132EB 8CFH1 LP32T430K 20 Housing RLF8CFH132EB 6 8 (1) 26/32/42W Triple tube, multi-volt electronic ballast (120-277V) RLF8CFH213TWEB 7 8 (2) 13W Osram Twin tube, multi-volt electronic ballast (120-277V) RLF8CFH213EB 7 8 (2) 13W Quad multi-volt electronic ballast (120-277V) RLF8CFH218EB 7 8 (2) 18W Quad multi-volt electronic ballast (120-277V) RLF8CFH226EB 7 8 (2) 26W Quad multi-volt electronic ballast (120-277V) RLF8CFH232EB 8 8 (2) 32/42W Triple tube, multi-volt electronic ballast (120-277V) Housing Options SD 4 Small Diameter Housing FSDFA Fuse kit installed at factory RIF1 Radio interference filter (single circuit) SDM 1 Lutron Compact SE Dimming Ballast to 5% 3-wire (specify voltage and wattage) DM 1 Electronic Analog Dimming Ballast to 3%, 4-wire, 0-10V (120-277V) (Specify wattage on two lamp housing) HDM 3, 9 Lutron Hi-Lume Dimming Ballast to 1% 3-wire (specify voltage and wattage) reflector 8CFH1 8 1-Lamp Alzak Semi- Diffuse 8CFH 8 Alzak Semi- Diffuse two lamp quad 8CFHT 8 2-Lamp Alzak Triple Tube Semi-Diffuse reflector Color BLANK Clear Alzak CG Champagne Gold Alzak PW Pewter Alzak WE Wheat Alzak LW Light Wheat Alzak BB Black baffle (with clear Alzak upper reflector) WB White baffle (with clear Alzak upper reflector) Lens Spray Color Options Blank Painted White CR Clear Alzak CG Champagne Gold Alzak PW Pewter Alzak WE Wheat Alzak LW Light Wheat Alzak Reflector Options CL Regressed clear Lens PL Regressed prismatic lens DL Regressed diffuse lens FL Regressed fresnel lens WT White Flange (Alzak only) TRG Trim Ring Gasket (Factory installed) WF 4 Wide Flange Accessories LP -wattage= 13, 18, 26, 32, 42 -type= Q4 (Quad 4-pin); TW4 (Twin 4-pin); T4 (Triple 4-pin) -temp= 27K, 30K, 35K, 41K (Kelvin) RWD8 4 Retrofit Wide Diameter Housing Kit (8 ) FSDFI Fuse kit for field installation NOTES 1 Not available for 13W Twin Tube Lamps 2 Available for Osram Sylvania Quick 60+ Limited Warranty when used with Osram lamp(s). See www.prescolite.com for details 3 Not available for 13W and 18W 4 See Housing Capatibility Guide for Hole Diameter Compatibility 5 Specify for lensed trims only 6 Use 8CFH1 Reflector 7 Use 8CFH Reflector 8 Use 8CFHT Reflector 9 Not available for 42W 2DM 1, 9 Lutron Tu-Wire Dimming Ballast to 1% 3-wire (specify voltage and wattage) 7DM Advance Mark 7 Dimming Ballast to 5% 4-wire, 0-10V analog (120V thru 277V) (specify voltage and wattage) XDM Advance Mark 10 Dimming Ballast to 5% 2-wire, line voltage MW26 Max Wattage label, 26W MW32 Max Wattage label, 32W SYL 2 Osram Sylvania Electronic Ballast (available only for standard EB option) 347V Contact Technical Support Or d e r i n g Gu i d e l i n e s Re q u i r e s SD Ho u s i n g Op t i o n Housing Compatibility Guide m i n 8 i n c h m a x 7-15/16 8-1/8 All Standard Housings 8-1/8 8-3/4 Re q u i r e s RWD Kit Ac c e ss o r y & WF Reflector Option Dimensions shown are for the diameter of the frame flange at it's narrowest point 8-3/4 9-1/8

Ideal for upgrading applications to higher energy efficient, CFL sources in existing apertures Electronic ballast with end of life protection and 120-277V universal voltage Multiple dimming options (Lutron, Advance) & Osram ballast option Utilizes Prescolite s award winning WFT2 Optics Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non-IC rated. Wet location listed when used with lensed trims RLF6CFV CATALOG LOGIC SPECIFICATION INFORMATION ORDERING EXAMPLE: RLF6CFV32EB 6CFV LP32T30K Housing Reflectors Accessories RLF6CFV32EB 6CFV LP32T30K Housing RLF6CFV32EB 6 (1) 26/32/42W Triple tube,multi-volt electronic ballast (120-277V) Housing Options SD 4 Small Diameter Housing FSDFA Fuse kit installed at factory RIF1 Radio interference filter (single circuit) DM Electronic Analog Dimming Ballast to 3%, 4-wire, 0-10V (120-277V) (Specify wattage on two lamp housing) SDM Lutron Compact SE Dimming Ballast to 5% 3-wire (specify voltage and wattage) HDM 1 Lutron Hi-Lume Dimming Ballast to 1% 3-wire (specify voltage and wattage) 2DM 1 Lutron Tu-Wire Dimming Ballast to 1% 3-wire (specify voltage and wattage) 7DM Advance Mark 7 Dimming Ballast to 5% 4-wire, 0-10V analog (120V thru 277V) (specify voltage and wattage) XDM Advance Mark 10 Dimming Ballast to 5% 2-wire, line voltage MW26 Max Wattage label, 26W MW32 Max Wattage label, 32W SYL 3 Osram Sylvania Electronic Ballast (available only for standard EB option) 347V Contact Technical Support reflector 6CFV 6 Alzak Semi- Diffuse Or d e r i n g Gu i d e l i n e s reflector Color BLANK Clear Alzak CG Champagne Gold Alzak PW Pewter Alzak WE Wheat Alzak LW Light Wheat Alzak BB Black baffle (with clear Alzak upper reflector) WB White baffle (with clear Alzak upper reflector) Re q u i r e s SD Ho u s i n g Op t i o n Lens Spray Color Options Blank Painted White CR Clear Alzak CG Champagne Gold Alzak PW Pewter Alzak WE Wheat Alzak LW Light Wheat Alzak Housing Compatibility Guide m i n 6 i n c h Reflector Options CL Regressed clear Lens PL Regressed prismatic lens DL Regressed diffuse lens FL Regressed fresnel lens WT White Flange (Alzak only) TRG Trim Ring Gasket (Factory installed) WF 4 Wide Flange m a x 5-15/16 6-1/8 All Standard Housings 6-1/8 6-1/2 Re q u i r e s RWD 6 Kit Ac c e ss o r y & WF Reflector Option Dimensions shown are for the diameter of the frame flange at it's narrowest point 6-1/2 6-7/8 Accessories LP -wattage= 13, 18, 26, 32, 42 -type= Q4 (Quad 4-pin); TW4 (Twin 4-pin); T4 (Triple 4-pin) -temp= 27K, 30K, 35K, 41K (Kelvin) RWD6 4 Retrofit Wide Diameter Housing Kit (6 ) FSDFI Fuse kit for field installation NOTES 1 Not available for 42W 2 Not available for 32W & 42W 3 Available for Osram Sylvania Quick 60+ Limited Warranty when used with Osram lamp(s). See www.prescolite.com for details 4 See Housing Capability Guide for Hole Diameter Compatibility (page 24) 5 Specify for lensed trims only 21 www.prescolite.com

Ideal for upgrading applications to higher energy efficient, CFL sources in existing apertures Electronic ballast with end of life protection and 120-277V universal voltage Multiple dimming options (Lutron, Advance) & Osram ballast option Utilizes Prescolite s award winning WFT2 Optics Universal for most competitive products CSA C/US listed for damp locations and through wiring, Non-IC rated. Wet location listed when used with lensed trims RLF8CFV CATALOG LOGIC SPECIFICATION INFORMATION ORDERING EXAMPLE: RLF8CFV32EB 8CFV LP32T30K Housing Reflector ACCESSORIES RLF8CFV32EB 8CFV LP32T30K 22 Housing RLF8CFV32EB 8 (1) 26/32/42W Triple tube, multi-volt electronic ballast (120-277V) NOTES 1 Not available for 42W 2 Not available for 32W & 42W Housing Options SD 4 Small Diameter Housing FSDFA Fuse kit installed at factory RIF1 Radio interference filter (single circuit) SDM Lutron Compact SE Dimming Ballast to 5% 3-wire (specify voltage and wattage) DM Electronic Analog Dimming Ballast to 3%, 4-wire, 0-10V (120-277V) (Specify wattage on two lamp housing) HDM 1 Lutron Hi-Lume Dimming Ballast to 1% 3-wire (specify voltage and wattage) reflector 8CFV 8 Alzak Semi- Diffuse reflector Color BLANK Clear Alzak CG Champagne Gold Alzak PW Pewter Alzak WE Wheat Alzak LW Light Wheat Alzak BB Black baffle (with clear Alzak upper reflector) WB White baffle (with clear Alzak upper reflector) Lens Spray Color Options Blank Painted White CR Clear Alzak CG Champagne Gold Alzak PW Pewter Alzak WE Wheat Alzak LW Light Wheat Alzak Reflector Options CL Regressed clear Lens PL Regressed prismatic lens DL Regressed diffuse lens FL Regressed fresnel lens WT White Flange (Alzak only) TRG Trim Ring Gasket (Factory installed) WF 4 Wide Flange Accessories LP -wattage= 26, 32, 42 -type= T (Triple 4-pin) -temp= 27K, 30K, 35K, 41K (Kelvin) RWD8 4 Retrofit Wide Diameter Housing Kit (8 ) FSDFI Fuse kit for field installation 3 Available for Osram Sylvania Quick 60+ Limited Warranty when used with Osram lamp(s). See www.prescolite.com for details 4 See Housing Capability Guide for Hole Diameter Compatibility (page 25) 5 Specify for lensed trims only 2DM 1 Lutron Tu-Wire Dimming Ballast to 1% 3-wire (specify voltage and wattage) 7DM Advance Mark 7 Dimming Ballast to 5% 4-wire, 0-10V analog (120V thru 277V) (specify voltage and wattage) XDM Advance Mark 10 Dimming Ballast to 5% 2-wire, line voltage MW26 Max Wattage label, 26W MW32 Max Wattage label, 32W Or d e r i n g Gu i d e l i n e s Re q u i r e s SD Ho u s i n g Op t i o n Housing Compatibility Guide m i n 8 i n c h m a x 7-15/16 8-1/8 All Standard Housings 8-1/8 8-3/4 Re q u i r e s RWD Kit Ac c e ss o r y & WF 8-3/4 9-1/8 SYL 3 Osram Sylvania Electronic Ballast (available only for standard EB option) 347V Contact Technical Support Reflector Option Dimensions shown are for the diameter of the frame flange at it's narrowest point

RD6LED PHOTOMETRY DRIVER DATA D6LED4 D6LED4 277V Input Voltage 120V +/- 10% 277V +/- 10% Input Frequency 50/60 Hz 50/60 Hz Input Current 0.235A (0.4A max) 0.13A (0.5A max) Input Power 28W (34W max) 28.5W (40W max) Constant Current Output 1400mA 1400mA Power Factor 0.90 0.78 at 277V THD <20% <20% EMI Filtering FCC 47CFR FCC 47CFR Part 15, Class A Part 15, Class B Operating Temperature -40ºC to 60ºC -40ºC to 60ºC Over-voltage, over-current, short-circuit protection LUMEN MULTIPLIER 2700K 3500K 4000K 5000K 70+ CRI 1.06 1.13 1.20 1.41 80+ CRI 0.89 Baseline 1.10 1.15 Note: Multipliers shown are based on LED manufacturer data and can be used to approximate the lumen intensity of a fixture with different LED color temperature and/or CRI with identical optical configuration and reflector finish. For reference only. Rd6led4-6d9led435k8 LED Light Engine: (10) LED Array Nichia 3500K Mid CRI System Wattage: 27.7 Fixture delivered lumens: 1034 Fixture Efficacy: 37 Spacing Criteria: 0.9 90º ZONAL LUMEN SUMMARY ZONE LUMENS %LUMINAIRE 0-30 719 69.5 0-40 928 99.8 0-60 1029 99.5 0-90 1034 100.0 90-180 0 0.0 0-180 1034 100.0 Luminance Data in Candela/Sq. Meter Angle in Vertical Average - 0º 45 9067 55 287 65 0 75 0 85 629 75º CANDELA DISTRIBUTION DEG CANDELA LUMENS 400 0 1121 60º 5 1047 98 15 935 264 800 25 824 357 35 331 209 45º 45 117 95 55 3 5 65 0 2 1200 75 0 1 15º 30º 85 1 2 90 0 0 Test 0º No. 3116 Tested at 25ºC Ambient in accordance to IESNA LM-79-2008 COEFFICIENTS OF UTILIZATION Room Cavity Ratio % Effective Floor Cavity Reflectance 80% 70% 50% 30% 10% 20% Effective Floor Cavity Reflectance % Wall Reflectance Zonal Cavity Method 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1 113 111 108 106 111 108 106 104 104 102 101 101 99 98 97 96 95 2 108 103 99 95 105 101 97 94 98 95 92 95 92 90 92 90 88 3 102 96 90 86 100 94 89 86 91 88 84 89 86 83 87 84 82 4 97 89 83 79 95 88 83 79 86 81 78 84 80 77 82 79 76 5 92 83 77 73 90 82 77 72 80 76 72 79 75 71 77 74 71 6 87 78 72 67 85 77 71 67 76 70 67 74 70 66 73 69 66 7 82 73 67 63 81 72 67 62 71 66 62 70 65 62 69 65 61 8 78 69 62 58 77 68 62 58 67 62 58 66 61 58 65 61 57 9 74 65 59 54 73 64 58 54 63 58 54 62 57 54 61 57 54 10 71 61 55 51 70 61 55 51 60 54 51 59 54 51 58 54 51 Rd6led4-6d9led435k8 Test No. 3116 23 ZONAL LUMEN SUMMARY Luminance Data in Candela/Sq. Rd6led4-6d9led435k8FL35 ZONE LUMENS %LUMINAIRE Meter LED Light Engine: (10) LED Array 3500K Mid CRI with Flood Lens Angle in Vertical Average - 0º 0-30 953 85.4 System Wattage: 27.6 45 3410 Fixture delivered lumens: 1116 0-40 1064 95.4 55 1242 Fixture Efficacy: 40 0-60 1113 99.7 65 259 Spacing Criteria: 0.6 0-90 1116 100.0 90º 75 212 90-180 0 0.0 85 0 0-180 1116 100.0 75º CANDELA DISTRIBUTION COEFFICIENTS OF UTILIZATION Zonal Cavity Method DEG CANDELA LUMENS % Effective Floor Cavity Reflectance 800 0 2288 80% 70% 50% 30% 10% 60º 20% Effective Floor Cavity Reflectance 5 2258 212 % Wall Reflectance 15 1651 451 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 25 624 290 1 114 112 110 108 112 110 108 106 106 104 103 102 101 100 99 98 97 1600 2 109 105 102 99 107 104 106 98 100 98 96 97 95 93 95 93 92 35 171 111 3 105 99 95 92 103 98 101 91 95 92 89 93 90 88 91 89 87 45º 45 44 36 4 101 94 89 86 99 93 97 85 91 87 84 89 86 83 87 85 82 5 97 89 84 81 95 89 93 80 87 83 80 85 82 79 84 81 78 55 13 12 6 93 85 80 76 91 84 90 76 83 79 76 82 78 75 80 77 75 65 2 2 7 89 81 76 72 88 81 87 72 79 75 72 78 74 72 77 74 71 2400 8 86 78 73 69 85 77 85 69 76 72 69 75 71 68 74 71 68 75 1 1 9 83 74 69 66 82 74 82 66 73 69 66 72 68 65 71 68 65 15º 30º 85 0 0 10 80 71 66 63 79 71 80 63 70 66 63 69 65 63 69 65 62 90 0 0 Rd6led4-6d9led435k8FL35 Test No. 3112 0º Test No. 3112 Tested at 25ºC Ambient in accordance to IESNA LM-79-2008 Room Cavity Ratio Notes Refer to www.prescolite.com for additional photometric tests (IES Files). www.prescolite.com

RD6LED PHOTOMETRY Rd6led4-6d9led435k8MD25 LED Light Engine: (10) LED Array 3500K Mid CRI with Medium Lens System Wattage: 27.8 Fixture delivered lumens: 1128 Fixture Efficacy: 41 Spacing Criteria: 0.4 1400 2800 4200 90º CANDELA DISTRIBUTION 75º DEG CANDELA LUMENS 0 4067 60º 5 3661 324 15 1635 454 25 471 223 35 126 82 45º 45 41 32 55 13 12 65 1 0 75 0 0 15º 30º 85 0 0 90 0 0 0º Test No. 3111 Tested at 25ºC Ambient in accordance to IESNA LM-79-2008 ZONAL LUMEN SUMMARY ZONE LUMENS %LUMINAIRE 0-30 1001 88.7 0-40 1083 96.0 0-60 1127 100.0 0-90 1128 100.0 90-180 0 0.0 0-180 1128 100.0 COEFFICIENTS OF UTILIZATION Room Cavity Ratio Luminance Data in Candela/Sq. Meter Angle in Vertical Average - 0º 45 3177 55 1242 65 130 75 0 85 0 % Effective Floor Cavity Reflectance 80% 70% 50% 30% 10% 20% Effective Floor Cavity Reflectance % Wall Reflectance Zonal Cavity Method 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1 115 112 110 108 112 110 108 107 106 105 100 103 101 100 99 98 98 2 110 106 103 100 108 105 102 99 102 99 195 99 97 95 96 95 93 3 106 101 97 94 104 100 96 93 97 93 90 95 93 90 93 91 89 4 102 97 92 89 101 95 91 88 93 90 86 92 89 86 90 87 85 5 99 92 88 84 97 91 87 84 90 86 83 88 85 83 87 84 82 6 95 89 84 81 94 88 83 80 86 83 79 85 82 79 84 81 79 7 92 85 80 77 91 84 80 77 83 79 76 82 79 76 81 78 76 8 89 82 77 74 88 81 77 74 80 77 73 80 76 73 79 76 73 9 87 79 75 71 86 79 74 71 78 74 71 77 73 71 76 73 71 10 84 76 72 69 83 76 72 69 75 71 69 75 71 69 74 71 68 Rd6led4-6d9led435k8MD25 Test No. 3111 24 Rd6led4-6d9led435k8SP18 LED Light Engine: (10) LED Array 3500K Mid CRI with Spot Lens System Wattage: 27.8 Fixture delivered lumens: 1274 Fixture Efficacy: 46 Spacing Criteria: 0.2 75º CANDELA DISTRIBUTION 4000 DEG CANDELA LUMENS 0 10676 60º 5 7131 585 15 1516 450 8000 25 347 171 35 65 41 45º 45 26 19 55 8 7 65 2 1 12000 75 0 0 15º 30º 85 0 0 90 0 0 Test 0º No. 3110 Tested at 25ºC Ambient in accordance to IESNA LM-79-2008 90º ZONAL LUMEN SUMMARY ZONE LUMENS %LUMINAIRE 0-30 1205 94.6 0-40 1247 97.8 0-60 1273 99.9 0-90 1274 100.0 COEFFICIENTS OF UTILIZATION Room Cavity Ratio Luminance Data in Candela/Sq. Meter Angle in Vertical Average - 0º 45 2015 55 764 65 259 75 0 85 0 % Effective Floor Cavity Reflectance 80% 70% 50% 30% 10% 20% Effective Floor Cavity Reflectance % Wall Reflectance Zonal Cavity Method 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1 115 113 111 110 113 111 109 108 107 106 105 103 103 102 100 99 99 2 112 108 105 103 110 107 104 102 104 101 100 101 99 98 98 97 96 3 108 104 101 98 107 103 100 97 100 98 96 98 96 94 96 94 93 4 105 100 97 94 104 99 96 93 97 94 92 95 93 91 94 92 90 5 102 97 93 90 101 96 93 90 95 91 89 93 90 88 92 89 88 6 100 94 90 87 99 93 90 87 92 89 86 91 88 86 90 87 85 7 97 91 87 85 96 91 87 84 90 86 84 89 86 84 88 85 83 8 95 89 85 82 94 88 85 82 88 84 82 87 84 82 86 83 81 9 93 87 83 80 92 86 83 80 85 82 80 85 82 80 84 81 80 10 91 85 81 78 90 84 81 78 84 80 78 83 80 78 82 80 78 Rd6led4-6d9led435k8SP18 Test No. 3110 Notes Refer to www.prescolite.com for additional photometric tests (IES Files).

RLF6LED & RLF8LED PHOTOMETRY RLF6LED 6LFLED5 35K LED Light Engine: 3500K, 80 CRI System Wattage: 18.5W Fixture Delivered Lumens: 916 Fixture Efficacy: 50 Spacing Criteria: 1.2 ZONAL LUMEN SUMMARY ZONE LUMENS %LUMINAIRE 0-30 486 53.0 0-40 775 84.6 0-60 915 99.9 0-90 916 100.0 90-180 0 0.0 0-180 916 100.0 Luminance Data in Candela/Sq. Meter Angle in Vertical Average - 0º 45 15105 55 312 65 141 75 0 85 0 200 400 600 0º 15º 30º 90º 75º 60º 45º CANDELA DISTRIBUTION DEG CANDELA LUMENS 0 573 5 584 56 15 606 170 25 562 259 35 469 289 45 179 136 55 3 4 65 1 1 75 0 0 85 0 0 90 0 0 Test No. 3332 Tested at 25ºC Ambient in accordance to IESNA LM-79-2008 COEFFICIENTS OF UTILIZATION Room Cavity Ratio % Effective Floor Cavity Reflectance 80% 70% 50% 30% 10% 20% Effective Floor Cavity Reflectance % Wall Reflectance Zonal Cavity Method 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1 113 110 107 105 110 108 105 103 104 102 100 100 98 97 97 95 94 2 107 101 97 93 104 99 95 92 96 93 90 93 90 88 90 88 86 3 100 93 88 83 98 92 87 83 89 85 81 87 83 80 84 81 79 4 94 86 80 75 92 85 79 75 83 78 74 80 76 73 79 75 72 5 89 79 73 68 87 78 72 68 77 71 67 75 70 66 73 69 66 6 83 73 67 62 82 73 66 62 71 65 61 70 65 61 68 64 60 7 78 68 61 57 77 67 61 56 66 60 56 65 60 56 64 59 55 8 74 63 56 52 73 63 56 52 61 56 51 60 55 51 59 55 51 9 70 59 52 48 68 58 52 48 57 52 47 56 51 47 55 51 47 10 66 55 48 44 65 54 48 44 54 48 44 53 47 44 52 47 44 RLF6LED 6LFLED5 35K Test No. 3332 25 RLF8LED 8LFLED5 35K LED Light Engine: 3500K, 80 CRI System Wattage: 18.5W Fixture Delivered Lumens: 916 Fixture Efficacy: 50 Spacing Criteria: 1.2 ZONAL LUMEN SUMMARY ZONE LUMENS %LUMINAIRE 0-30 501 56.0 0-40 820 91.7 0-60 894 99.9 0-90 895 100.0 90-180 0 0.0 0-180 865 100.0 Luminance Data in Candela/Sq. Meter Angle in Vertical Average - 0º 45 15105 55 312 65 141 75 0 85 0 CANDELA DISTRIBUTION DEG CANDELA LUMENS 0 529 5 542 52 15 571 163 25 619 286 35 529 319 45 62 71 55 4 4 65 1 0 75 0 0 85 0 0 90 0 190 380 570 0º 15º 30º 90º 75º 60º 45º COEFFICIENTS OF UTILIZATION Room Cavity Ratio % Effective Floor Cavity Reflectance 80% 70% 50% 30% 10% 20% Effective Floor Cavity Reflectance % Wall Reflectance Zonal Cavity Method 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1 113 110 107 105 111 108 106 103 104 102 100 100 99 97 97 96 94 2 107 102 97 94 105 100 96 91 97 93 91 94 91 89 91 89 87 3 101 94 89 84 99 92 88 82 90 86 82 87 84 81 85 82 80 4 95 87 81 76 93 86 80 75 83 79 75 81 77 74 79 76 73 5 89 80 74 69 88 79 73 68 77 72 68 76 71 68 74 70 67 6 84 74 68 63 83 74 67 62 72 67 62 71 66 62 69 65 62 7 79 69 62 58 78 68 62 57 67 61 57 66 61 57 65 60 57 8 75 64 58 53 73 64 57 53 63 57 53 61 56 53 60 56 52 9 71 60 53 49 69 59 53 49 58 53 49 57 52 49 57 52 48 10 67 56 50 45 66 55 49 45 55 49 45 54 49 45 53 48 45 RLF8LED 8LFLED5 35K Test No. 3517 Test No. 3517 Tested at 25ºC Ambient in accordance to IESNA LM-79-2008 www.prescolite.com

RLF6CFH PHOTOMETRY BALLAST DATA 26W Triple 32W Triple 42W Triple 120V 277V 347V 120V 277V 347V 120V 277V 347V Total System Watts 29 29 31 36 36 36 46 46 50 Input Current (Amps) 0.24 0.11 0.09 0.31 0.13 0.11 0.38 0.17 0.15 Input Frequency in Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Power Factor <.98 <.98 <.95 <.98 <.98 <.95 <.98 <.98 <.95 Ballast Factor <1.1 <1.1 <1.02 <.98 <.98 <.98 <.98 <.98 <1.0 Total Harmonic Distortion <10% <10% <10% <10% <10% <10% <10% <10% <10% LAMP DATA 26 Rated Watts 26W Triple 32W Triple 42W Triple Rated Lumens 1710 2400 3200 Efficacy (LPW) 66 75 76 Rated Life 12,000 12,000 12,000 CRI 82 82 82 Min. Starting Temp. 32 F 32 F 32 F RLF6CFH132EB/6CFH1 Clear Alzak Reflector Lamp: 1-CF32DT/E/IN/SYLVANIA Spacing Criteria: 0 =1.5 90 =1.5 Efficiency: 69.3% 250 500 750 CANDLEPOWER DISTRIBUTION 0º 0 15 30 LEGEND: 0-deg: 90-deg: 15º 30º Test No. 3107 90º 90 75º 75 60º 60 45º 45 CANDLEPOWER SUMMARY Angle 0 45 90 0 630 630 630 5 627 625 623 10 623 621 622 15 633 623 631 20 722 650 634 25 748 678 645 30 711 665 648 35 642 630 625 40 605 582 573 45 541 523 482 50 447 446 360 55 320 298 227 60 179 142 109 65 46 39 27 70 8 8 8 75 3 3 3 80 2 1 1 85 1 1 0 90 0 0 0 Note: Use of horizontally-lamped open downlights with amalgam-based CFL lamps in air-handling plenums is not recommended because cool air flow over the lamps will result in reduced light output. Prescolite recommends vertical lamp downlights or use of the regressed lensed trim option for horizontal downlights in these applications to reduce this effect. Refer to Prescolite White Paper WP0003 at www. prescolite.com for more information. Luminance Data in Candela/Sq. Meter Angle in Average Average Average Vertical 0 90 180 45 45652 40674 45315 55 33290 23615 31105 65 6495 3812 7342 75 692 692 692 85 685 0 0 COEFFICIENTS OF UTILIZATION Room Cavity Ratio Test No. 3107 Average initial footcandles on workplane Assumptions: 1. Ceiling 80% Wall 50% Floor 20% 2. 4 Luminaires evenly spaced in the center of the room. 3. The room is square and has a width and length equal to twice the lamp spacing (LS). 4. RCR is Room Cavity Ratio. 5. Dirt and Lumen Depreciation Factors are 1.0. 6. Ballast Factor is 1.0 for ballasted fixtures. LS (Feet) (Footcandles) RCR1 RCR3 RCR7 7.0 37 29 20 8.0 28 23 15 9.0 22 18 12 10.0 18 14 10 11.0 15 12 8 12.0 13 10 7 13.0 11 9 6 14.0 9 7 5 15.0 8 6 4 Test No. 3107 Zonal Cavity Method % Effective Ceiling Cavity Reflectance 80% 70% 50% 30% 10% 20% Effective Floor Cavity Reflectance % Wall Reflectance 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1.77.75.73.71.76.73.71.69.70.69.67.68.66.65.65.64.63 2.72.67.63.60.70.66.62.59.63.61.58.61.59.57.59.57.56 3.66.60.55.52.65.59.55.51.57.53.50.55.52.50.54.51.49 4.61.54.49.45.60.53.48.44.51.47.44.50.46.43.49.45.43 5.57.49.43.39.55.48.43.39.47.42.39.45.41.38.44.41.38 6.52.44.38.34.51.43.38.34.42.38.34.41.37.34.40.36.33 7.49.40.34.31.47.39.34.30.38.34.30.37.33.30.37.33.30 8.45.37.31.27.44.36.31.27.35.30.27.34.30.27.34.30.27 9.42.33.28.25.41.33.28.24.32.28.24.32.27.24.31.27.24 10.40.31.26.22.39.30.26.22.30.25.22.29.25.22.29.25.22 LF6CFH132EB/6CFH1 Test No. 3107 Notes Refer to standard spec sheets for photometric data for other reflector options. Refer to www.prescolite.com for additional photometric tests (IES Files). When ordering a sloped ceiling adapter, specify the degree of slope in 5 increments, max. of 35. For a more precise degree or wet ceiling applications, please contact factory. Sloped ceiling adapter and housing must be installed at the same time prior to finish ceiling installation.

RLF8CFH PHOTOMETRY BALLAST DATA 26W Triple 32W Triple 42W Triple 120V 277V 347V 120V 277V 347V 120V 277V 347V Total System Watts 29 29 31 36 36 36 46 46 50 Input Current (Amps) 0.24 0.11 0.09 0.31 0.13 0.11 0.38 0.17 0.15 Input Frequency in Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Power Factor <.98 <.98 <.95 <.98 <.98 <.95 <.98 <.98 <.95 Ballast Factor <1.1 <1.1 <1.02 <.98 <.98 <.98 <.98 <.98 <1.0 Total Harmonic Distortion <10% <10% <10% <10% <10% <10% <10% <10% <10% LAMP DATA Rated Watts 26W Triple 32W Triple 42W Triple Rated Lumens 1710 2400 3200 Efficacy (LPW) 66 75 76 Rated Life 12,000 12,000 12,000 CRI 82 82 82 Min. Starting Temp. 32 F 32 F 32 F RLF8CFH132EB/8CFH1 Clear Alzak Reflector Lamp: 1-CF42DT/E/IN/827-SYLVANIA Spacing Criteria: 0 =1.5 90 =1.4 Efficiency: 62.4% 350 700 1050 CANDLEPOWER DISTRIBUTION 0º 0 15 15º 30º 30 LEGEND: 0-deg: 90-deg: Test No. 3108 90 90º 75 75º 60 60º 45º 45 CANDLEPOWER SUMMARY Angle 0 45 90 0 878 878 878 5 906 895 894 10 976 948 931 15 993 973 954 20 950 940 934 25 946 892 907 30 893 861 892 35 869 805 812 40 795 729 657 45 646 583 470 50 456 417 312 55 303 284 233 60 191 190 158 65 29 30 25 70 7 7 7 75 4 4 3 80 2 2 2 85 1 1 1 90 0 0 0 Luminance Data in Candela/Sq. Meter Angle in Average Average Average Vertical 0 90 180 45 30007 21832 26198 55 17351 13343 17065 65 2254 1943 1865 75 508 381 381 85 377 377 377 Test No. 3108 Average initial footcandles on workplane Assumptions: 1. Ceiling 80% Wall 50% Floor 20% 2. 4 Luminaires evenly spaced in the center of the room. 3. The room is square and has a width and length equal to twice the lamp spacing (LS). 4. RCR is Room Cavity Ratio. 5. Dirt and Lumen Depreciation Factors are 1.0. 6. Ballast Factor is 1.0 for ballasted fixtures. LS (Feet) (Footcandles) RCR1 RCR3 RCR7 7.0 44 36 24 8.0 34 28 19 9.0 27 22 15 10.0 22 18 12 11.0 18 15 10 12.0 15 12 8 13.0 13 10 7 14.0 11 9 6 15.0 10 8 5 Test No. 3108 27 RLF8CFH232EB/8CFHT Clear Alzak Reflector Lamp: 2-CF32DT/E/IN/827-SYLVANIA Spacing Criteria: 0 =1.5 90 =1.3 Efficiency: 63.2% 500 1000 1500 CANDLEPOWER DISTRIBUTION 0º 0 15º 15 30º 30 LEGEND: 0-deg: 90-deg: Test No. 3118 90 90º 75 75º 60 60º 45 45º CANDLEPOWER SUMMARY Angle 0 45 90 0 1239 1239 1239 5 1305 1279 1247 10 1455 1378 1276 15 1548 1454 1297 20 1549 1423 1297 25 1495 1358 1238 30 1405 1273 1123 35 1287 1174 1021 40 1171 1088 943 45 1025 933 781 50 807 701 575 55 499 428 358 60 243 215 165 65 28 30 26 70 8 8 8 75 5 5 4 80 3 2 85 1 1 90 0 0 COEFFICIENTS OF UTILIZATION Room Cavity Ratio Zonal Cavity Method % Effective Ceiling Cavity Reflectance 80% 70% 50% 30% 10% 20% Effective Floor Cavity Reflectance % Wall Reflectance 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1.70.68.66.64.68.66.64.63.64.62.61.61.60.59.59.58.57 2.65.61.58.55.63.60.57.54.58.55.53.56.54.52.54.52.51 3.60.55.51.48.59.54.50.47.52.49.46.51.48.46.49.47.45 4.56.50.45.42.55.49.45.41.47.44.41.46.43.40.45.42.40 5.52.45.40.37.51.44.40.37.43.39.36.42.39.36.41.38.35 6.48.41.36.33.47.40.36.33.39.35.32.38.35.32.37.34.32 7.45.37.33.29.44.37.32.29.36.32.29.35.32.29.34.31.29 8.42.34.30.26.41.34.29.26.33.29.26.32.29.26.32.28.26 9.39.32.27.24.38.31.27.24.31.27.24.30.26.24.29.26.24 10.37.29.25.22.36.29.25.22.28.24.22.28.24.22.27.24.22 RLF8CFH132EB/8CFH1 Test No. 3108 Notes Refer to standard spec sheets for photometric data for other reflector options. Refer to www.prescolite.com for additional photometric tests (IES Files). When ordering a sloped ceiling adapter, specify the degree of slope in 5 increments, max. of 35. For a more precise degree or wet ceiling applications, please contact factory. Sloped ceiling adapter and housing must be installed at the same time prior to finish ceiling installation. Note: Use of horizontally-lamped open downlights with amalgam-based CFL lamps in air-handling plenums is not recommended because cool air flow over the lamps will result in reduced light output. Prescolite recommends vertical lamp downlights or use of the regressed lensed trim option for horizontal downlights in these applications to reduce this effect. Refer to Prescolite White Paper WP0003 at www.prescolite.com for more information. www.prescolite.com

RLF6CFV PHOTOMETRY BALLAST DATA 26W Triple 32W Triple 42W Triple 120V 277V 347V 120V 277V 347V 120V 277V 347V Total System Watts 29 29 31 36 36 36 46 46 50 Input Current (Amps) 0.24 0.11 0.09 0.31 0.13 0.11 0.38 0.17 0.15 Input Frequency in Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Power Factor <.98 <.98 <.95 <.98 <.98 <.95 <.98 <.98 <.95 Ballast Factor <1.1 <1.1 <1.02 <.98 <.98 <.98 <.98 <.98 <1.0 Total Harmonic Distortion <10% <10% <10% <10% <10% <10% <10% <10% <10% LAMP DATA CFLH1/CFLV Rated Watts 26W Triple 32W Triple 42W Triple Rated Lumens 1710 2200 3200 Efficacy (LPW) 66 69 76 Rated Life 12,000 12,000 12,000 CRI 82 82 82 Min. Starting Temp. 32 F 32 F 32 F Luminance Data in Candela/Sq. Meter Angle in Average Vertical 45 30812 55 20813 65 5367 75 461 85 0 Test No. ITL60612R 28 RLF6CFV32EB/6CFV with Clear Alzak Reflector Lamp: 1-CF32DT/E/IN/830-SYLVANIA Spacing Criteria: 1.4 Efficiency: 55.9% 190 380 570 CANDLEPOWER DISTRIBUTION 15º 30º 0 15 30 0º Test No. ITL60612R Test No. ITL60612R 90 90º 75 75º 60º 60 45º 45 CANDLEPOWER SUMMARY Angle 0 45 90 0 505 735 735 5 530 697 704 10 553 695 736 15 569 683 778 20 586 631 792 25 597 557 755 30 595 469 693 35 547 400 647 40 461 372 613 45 365 364 578 50 281 319 507 55 200 330 372 60 126 289 255 65 38 248 188 70 3 193 128 75 2 129 72 80 1 0 0 85 0 0 0 90 0 0 0 COEFFICIENTS OF UTILIZATION Room Cavity Ratio Average initial footcandles on workplane Assumptions: 1. Ceiling 80% Wall 50% Floor 20% 2. 4 Luminaires evenly spaced in the center of the room. 3. The room is square and has a width and length equal to twice the lamp spacing (LS). 4. RCR is Room Cavity Ratio. 5. Dirt and Lumen Depreciation Factors are 1.0. 6. Ballast Factor is 1.0 for ballasted fixtures. LS (Feet) (Footcandles) RCR1 RCR3 RCR7 7.0 29 24 16 8.0 23 18 12 9.0 18 15 10 10.0 14 12 8 11.0 12 10 7 12.0 10 8 6 13.0 9 7 5 14.0 7 6 4 15.0 6 5 4 % Effective Ceiling Cavity Reflectance 80% 70% 50% 30% 10% RLF6CFV32EB/6CFV 20% Effective Floor Cavity Reflectance % Wall Reflectance Zonal Cavity Method 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1.62.60.59.57.61.59.58.56.57.56.54.55.54.53.53.52.51 2.58.54.51.49.57.53.51.48.51.49.47.50.48.46.48.47.45 3.54.49.45.42.52.48.45.42.46.44.41.45.43.40.44.42.40 4.50.44.40.37.49.43.39.37.42.39.36.41.38.36.40.37.35 5.46.40.35.32.45.39.35.32.38.35.32.37.34.31.36.33.31 6.43.36.32.29.42.36.31.28.35.31.28.34.31.28.33.30.28 7.40.33.29.25.39.33.28.25.32.28.25.31.28.25.30.27.25 8.37.30.26.23.36.30.26.23.29.25.23.28.25.23.28.25.22 9.35.28.24.21.34.27.23.21.27.23.21.26.23.20.26.23.20 10.33.26.22.19.32.25.21.19.25.21.19.24.21.19.24.21.19 Test No. ITL60612R Notes Refer to www.prescolite.com for additional photometric tests (IES Files). When ordering a sloped ceiling adapter, specify the degree of slope in 5 increments, max. of 35. For a more precise degree or wet ceiling applications, please contact factory. Sloped ceiling adapter and housing must be installed at the same time prior to finish ceiling installation.

RLF8CFV PHOTOMETRY BALLAST DATA 26W Triple 32W Triple 42W Triple 120V 277V 347V 120V 277V 347V 120V 277V 347V Total System Watts 29 29 31 36 36 36 46 46 50 Input Current (Amps) 0.24 0.11 0.09 0.31 0.13 0.11 0.38 0.17 0.15 Input Frequency in Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Power Factor <.98 <.98 <.95 <.98 <.98 <.95 <.98 <.98 <.95 Ballast Factor <1.1 <1.1 <1.02 <.98 <.98 <.98 <.98 <.98 <1.0 Total Harmonic Distortion <10% <10% <10% <10% <10% <10% <10% <10% <10% LAMP DATA Rated Watts 26W Triple 32W Triple 42W Triple Rated Lumens 1710 2400 3200 Efficacy (LPW) 66 75 76 Rated Life 12,000 12,000 12,000 CRI 82 82 82 Min. Starting Temp. 32 F 32 F 32 F RLF8CFV32EB/8CFV with Clear Alzak Reflector Lamp:1-PL-T/32W/830-PHILIPS Spacing Criteria: 1.4 Efficiency = 66.8% IXT 4.3 6.1 3.1 0.0 0.0 0.0 8 % 250 500 750 0º CANDLEPOWER DISTRIBUTION 15º 30º 0 15 30 Test No. 3109 90º 90 75 75º 60 60º 45 45º CANDLEPOWER SUMMARY Angle 0 0 605 5 635 10 684 15 703 20 668 25 631 30 599 35 559 40 506 45 448 50 367 55 279 60 201 65 114 70 13 75 3 80 2 85 1 90 0 90 0 Luminance Data in Candela/Sq. Meter Angle in Average Vertical 45 20810 55 15977 65 8860 75 381 85 377 Average initial footcandles on workplane Assumptions: 1. Ceiling 80% Wall 50% Floor 20% 2. 4 Luminaires evenly spaced in the center of the room. 3. The room is square and has a width and length equal to twice the lamp spacing (LS). 4. RCR is Room Cavity Ratio. 5. Dirt and Lumen Depreciation Factors are 1.0. 6. Ballast Factor is 1.0 for ballasted fixtures. LS (Feet) (Footcandles) RCR1 RCR3 RCR7 7.0 35 28 19 8.0 27 21 14 9.0 21 17 11 10.0 17 14 9 11.0 14 11 8 12.0 12 10 6 13.0 10 8 5 14.0 9 7 5 15.0 8 6 4 COEFFICIENTS OF UTILIZATION Room Cavity Ratio % Effective Ceiling Cavity Reflectance 80% 70% 50% 30% 10% 20% Effective Floor Cavity Reflectance % Wall Reflectance Test No. 3109 Test No. 3109 Zonal Cavity Method 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 1.74.72.70.68.73.70.68.67.68.66.64.65.64.62.63.62.61 2.69.64.60.57.67.63.60.57.61.58.55.59.56.54.57.55.53 3.63.57.53.49.62.56.52.49.54.51.48.53.50.47.51.48.46 4.58.51.46.42.57.51.46.42.49.45.42.48.44.41.46.43.41 5.54.46.41.37.53.46.41.37.44.40.36.43.39.36.42.38.36 6.50.42.37.33.49.41.36.33.40.36.32.39.35.32.38.35.32 7.47.38.33.29.45.38.33.29.37.32.29.36.32.29.35.31.28 8.43.35.30.26.42.35.29.26.34.29.26.33.29.26.32.28.26 9.41.32.27.23.40.32.27.23.31.26.23.30.26.23.30.26.23 10.38.30.25.21.37.29.25.21.29.24.21.28.24.21.28.24.21 RLF8CFV32EB/8CFV Test No. 3109 29 Notes Refer to standard spec sheets for photometric data for other reflector options. Refer to www.prescolite.com for additional photometric tests (IES Files). When ordering a sloped ceiling adapter, specify the degree of slope in 5 increments, max. of 35. For a more precise degree or wet ceiling applications, please contact factory. Sloped ceiling adapter and housing must be installed at the same time prior to finish ceiling installation. www.prescolite.com