05.2015 MONOFEEDER Horizontal trailed mixer-feeders SGARIBOLDI S.r.l. Via Pietro Nenni 15 26845 Codogno - Lodi (Italy) Tel. (+39) 0377 430 405 Fax (+39) 0377 430 415 info@sgariboldi.it sgariboldi.it
OVER 50 YEARS EXPERIENCE The push toward innovation led Sgariboldi to build the first diet-feeder in 1969. Today Sgariboldi designs and produces technologically advanced mixer-feeders which are appreciated andused all around the world. 1969 An experience that has meant:: specific know-how in zootechnics professional customer care and services 3 EXCLUSIVE MIXING SYSTEMS Expertise born from the experience we have gained in the most varied climatic conditions, which is able to provide the most effective solutions that are tailored to the breeder s specific needs. CUSTOM MADE MACHINES CREATED UPON REQUEST Modular systems: the machine s height, width and steering angle can be designed upon single client request.
MONOFEEDER HORIZONTAL TECHNOLOGY Great volumes with compact size Fresh and soft feed, with no friction in the tank TMR-UNIFEED OPTIMUM AND GUARANTEED PH The patented Monofeeder mixer-feeder has marked the birth of a new generation of machines, guaranteeing maximum performance and considerable cost reduction. It is not by chance that it has been a preference for more than twenty years, and has been used by thousands of breeders with the most varied needs. Horizontal single auger Twin flow system Monofeeder mixing has been certified in time by various and distinguished Institutes throughout the world. Fibrous products compliance and clean cut Maximum uniformity of the various components of the ration (proteins - carbohydrates - fibres) Animal health and well-being guaranteed by accurate studies CUTS AND MIXES performance reliability efficiency production INNOVATION AND EFFICIENCY Machines with an innovative functional design. The Monofeeder models offer a system that combines fowing movement and high performance. Fully hydrostatic system Top level components MAXIMUM SUSTAINABILITY waste time mechanical effort consumption
Stainless steel coatings and Hardox bottoms* MONOFEEDER TECHNOLOGY A perfect abridgement of innovation. This advanced mixing system, with a single horizontal auger, provides for maximum operative dependability, also featuring the most compact size on the market. Patented technology. Twin fow System Fast mixing quality mix Once the last ingredient has been loaded, the mix can be handed out to the animals. The single meal is a soft and homogenous mix cut just right. Excellent Fodder Value (compared to the siloed products structure) No overheating of the final product. In each phase of the mixing, the product is never pushed or pressed against the walls Maximum desirability and rumination. The fresh product, with its respected fibres, increases the bovine s appetite and the speed in which the feed moves towards the rumen A double flow to speed-up work. The auger, with its counterposed spirals, forces a dynamic twin fow upon the materials, from the front and rear part of the machine towards the centre of the tank. + milk + meat The SG setup (optional), the best for mixing without cutting, is able to perfectly homogenise the pre-cut products The RC setup (optional), a patented baling kit, is capable of splitting apart bales of all sizes, diameter and compactness, though still preserving the product s structure Completely hydrostatic auger transmission I vantaggi del defettore The advantages of the defector Inside the tank, the exclusive screening arm: reduces mixing time allows effective material flow eliminates stasis points Bolted counter knives With an especially designed arrangement according to the various types of ingredients Uniform and precise ration discharge One auger, one adaptor, one hydraulic motor. The advantages: less wear and tear less consumption less maintenance costs less environmental impact * Available upon request.
OUR RANGE CUTTING SYSTEM MONOFEEDER ST SIMPLE AND RELIABLE Available from 7 to 26 m 3 Ideal for driving in most confined spaces Also available as stationary workstation powered by electric motor or diesel engine MONOFEEDER DF VERSATILE AND EFFICIENT Available from 7 to 22 m 3 Self-loading system, two machines in one Double self-contained hydraulic system Loading drum The careful design of the shape of the drum, the relevant housing and the layout of the knives, together with the very high power, make it possible to load perfectly any product. This guarantees a smooth and uniform clamp face, thus preventing it to go mouldy. Protection system The rear auger protection device, which makes it possible to keep it always rotating (technical innovation award at EIMA 2001 show), is a sliding wall that rises with the progressive lifting of the loading arms, thus making any accidental contact with the mixing auger impossible while still allowing the optimal loading of the products. Rear shield The duly shaped hydraulic shield makes it possible to collect the products down to the bottom and obtain a perfect cleaning of the ground.
Modular systems The machine s height, width and steering angle can be designed upon single client request 01 02 CUSTOM MADE MACHINES MADE UPON REQUEST The machine s height, width and steering angle are designed according to the customer s request: each working need, even the most difficult to carry out, is examined by an experienced and qualified technical staff. The project is realised in a unique and original solution the customer can rely on, with a noteworthy contribution to the quality of his/her work. Available with electric motor or diesel engine and in stationary workstation* Road version* Adjustable weighing indicator* Electro-hydraulic remote controls* 01 02 03 04 Magnet at the discharge* 05 Fully customised and both side discharge* 06 A custom made machine Pneumatic brakes* Special hopper for salts and minerals* 07 08 The best performing solution Easy change - safe knife replacement system* 09 * Available upon request. 03 04 05 06 07 08 09
MONOFEEDER ST 7 ST 11 ST 14 ST 17 ST 17 ST PLUS Volume m 3 7 11 14 17 17 20 22 26 Length mm 5600 6200 6400 6700 6700 6900 7300 7300 Width mm 1900 2000 2300 2300 2300 2550 2550 2750 Standard Height mm 2200 2450 2650 2750 2750 2950 2950 3300 Wheels 10.0/75-15.3 285/70-19.5 15-22.5 15-22.5 15-22.5 15-22.5 15-22.5 18-22.5 External Wheel Track mm 1700 1850 2200 2200 2200 2450 2450 2700 Auger Diameter mm 670 770 870 870 960 1060 1060 1160 Discharge Width mm 800 800 800 800 1000 1000 1000 1000 Discharge Height mm 500 500 600 600 600 700 800 800 Required Power KW / HP 37/50 44/60 59/80 67/90 67/90 73/100 81/110 88/120 Weight kg 2400 3100 4000 4500 4500 5300 6000 8000 MACHINE EQUIPMENT Adjustable drawbar Chain Driven Left Side Discharge Auger Inverter Control Cables Mechanical Hand Brake Independent Hydraulic System Mechanical supporting foot Hydraulic supporting foot Electronic Weighing System Shaft Drive Hydraulic Discharge Lifting SG Version (only Mixer) RC Version (with Baling kit) Versione RC con kit rotoballe 20 ST PLUS 22 ST PLUS 26 ST PLUS COMPETENCE AT CUSTOMER S SERVICE Our commitment is that of making machines that are always more reliable and to offer the best service in time. MONOFEEDER DF 7 DF 11 DF 14 DF 17 DF 17 DF PLUS 20 DF PLUS 22 DF PLUS Volume m 3 7 11 14 17 17 20 22 Length mm 6400 7000 7200 7500 7500 7700 8200 Width mm 1950 2050 2350 2350 2350 2600 2600 Standard Height mm 2200 2450 2650 2750 2750 2950 2950 Wheels 10.0/75-15.3 285/70-19.5 15-22.5 15-22.5 15-22.5 15-22.5 15-22.5 External Wheel Track mm 1700 1850 2200 2200 2200 2450 2450 Auger Diameter mm 670 770 870 870 960 1060 1060 Discharge Width mm 800 800 800 800 1000 1000 1000 Discharge Height mm 500 500 600 600 600 700 800 Loading drum Width mm 1650 1650 1650 2050 2050 2050 2050 Required Power KW / HP 44/60 59/80 67/90 73/100 73/100 81/110 88/120 Weight kg 3300 4100 5000 5500 5500 6500 7000 TESTING Each machine is tested for fowing within the hydraulic system. Other thorough tests are also carried out. AFTER SALE SERVICE Sgariboldi guarantees after-sale support with a qualified and multi-language staff. SPARE PARTS A large and well stocked warehouse provides original spare parts that meet the highest production standards. TRAINED TECHNICAL PERSONNEL Internal and external technical staff is constantly trained by the parent company, in order to guarantee prompt and effective technical support service. MACHINE EQUIPMENT Adjustable drawbar Chain Driven Left Side Discharge Auger Inverter Control Cables Mechanical Hand Brake Independent Hydraulic System Mechanical supporting foot Hydraulic supporting foot Electronic Weighing System Shaft Drive Double rotation Loading drum Automatic de-fooding valve Anti-injury rear protection Hydraulic Discharge Lifting SG Version (only Mixer) RC Version (with Baling kit) Legend: STANDARD UPON REQUEST The data and technical specs in the chart can vary depending on the accessories the machine features. The Company can modify the data, should it deem it necessary, at any time and with no prior notice.