SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / - / / N 5/ 5 5 0 5 5 / 5/ Series 55-55 FTURS The monostable spool valves in conformity with I 650 Standard (00 route H version) have TÜV (55 series) and XI (55-55 series) certified with integraty levels: SIL for HFT = 0 / SIL for HFT = The solenoid operated spool valves have threaded port connections and "NMUR" interface The same spool valve can be adapted for / N or 5/ functions for controlling double-acting and single-acting actuators ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) an be externally piloted (external air pilot supply) to convert valve to zero minimum operation by flipping a gasket The solenoid valves satisfy all relevant U irectives GNRL ifferential pressure Flow (Qv at 6 bar) - 0, bar [ bar =00 kpa] / = 700 l/min (NR) / = 000 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered 55 : - 0 to + 0 VMQ (silicone) + PUR (polyurethane) 55 : - 0 to + 60 MTRILS IN ONTT WITH FLUI ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody, end covers Stainless steel, ISI 6L Interface plates Glass-filled P Spool valve internal parts Stainless steel, POM ore tube Stainless steel ore and plugnut Stainless steel ore spring Stainless steel Seals & discs NR Top disc FPM isc holder POM artridge (Low power) Welded, packless ISI 0 Seat Stainless steel Seat insert POM Shading coil Silver Rider ring (Low power) PTF (NF/WSNF solenoids only) SPIFITIONS pipe size orifice size flow coefficient kv operating pressure differential (bar) prefix optional solenoids power max. (PS) level NM TX / Ix min. () basic catalogue number IP65 air ( ) 7 & x d x e mb x mb x ia - ( ) (mm) (m /h) (l/min) ~ = ~/= F LPKF NF - M PV (WS)LI - S / N - 5/ - Solenoid air pilot operated - spring return (monostable) / 6 0,60 0 0 / 0 0 P - - - - - 550 () / 6 0,60 0 0 / 0 0 P - - - - - - - - 55G0 () / 6 0,60 0 0 / 0 0 LP - - m m - 550 () / 6 0,60 0 0 / 0 0 LP m - - - - - - - - 55G0 () /,,5 0 / 0 0 P - - - - - 550 () /,,5 0 / 0 0 P - - - - - - - - 55G0 () /,,5 0 / 0 0 LP - - m m - 550 () /,,5 0 / 0 0 LP m - - - - - - - - 55G0 () / N - 5/ - Solenoid air pilot operated and return (bistable) / 6 0,60 0 0 / 0 0 P - - - - - 550 / 6 0,60 0 0 / 0 0 P - - - - - - - - 55G0 / 6 0,60 0 0 / 0 0 LP - - m m - 550 / 6 0,60 0 0 / 0 0 LP m - - - - - - - - 55G0 /,,5 0 / 0 0 P - - - - - 550 /,,5 0 / 0 0 P - - - - - - - - 55G0 /,,5 0 / 0 0 LP - - m m - 550 /,,5 0 / 0 0 LP m - - - - - - - - 55G0 Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in only () ertified I 650 Functional Safety data, use suffix "SL". () Zero minimum is only achieved if external pressure is applied UP Not available Ultra Low power LP 0,5W - W Low power RP - MP P Not available 0,5W -,W Reduced and Medium power POWR LVLS - cold electrical holding values (watt) asic power ll leaflets are available on: www.asco.com PI-6-5-G 0G-06/R0
SRIS 55-55 PRFIX TL prefix power level description 5 6 7 LP RP MP P F xplosionproof - NM 7, - Zinc plated steel conduit m - - V xplosionproof - NM 7, - 6 SS conduit m - - M Waterproof IP66/67 - Metal enclosure (N/I 6007-7,-, -)* - - T Threaded conduit/hole (M0 x,5) - - L P K F Flameproof - luminium (N/I 6007-, 6007-)* - - - N F Flameproof - luminium (N/I 6007-, 6007-)* - - P V ncapsulated epoxy moulded (N/I 6007-)* m - - S Solenoid with spade plug connector (N/I 6070) - - W P Waterproof IP67 - Metal enclosure - - L I I.S. with luminium IP67 enclosure (N/I 6007-, 6007-)* m - - - W S Waterproof IP67-6 SS enclosure - - W S L P K F Flameproof - 6 SS (N/I 6007-, 6007-)* - - - W S M Waterproof IP66/67-6 SS enclosure (N/I 6007-7,-, -)* - - W S L I I.S. with 6L SS IP67 enclosure (N/I 6007-, 6007-)* m - - - W S N F Flameproof - 6 SS (N/I 6007-, 6007-)* - - T Threaded conduit (/" NPT) - - H T lass H - High temperature, +0 ambient temp. - - - X Other special constructions - - SUFFIX TL suffix power level description 5 6 7 LP RP MP P M O Push type manual operator / - - S L ertified I 650 Functional Safety data () / - - PROUT SLTION GUI STP Select the fluid temperature range and seal material from the general table on page 7. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications table above. xample: G550 STP Select prefix (combination). Select the appropriate operator from the specifications table on page and the prefix table on page. Select for this operator in the electrical characteristics table on page : the power level (LP, P), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. xample: M STP Select suffix (combination) if required. xample: MO STP Select voltage. Refer to standard voltages on page. xample: 0V / 50Hz STP 5 Final catalogue / ordering number. xample: M G550MO 0 V / 50 Hz OPTIONS & SSORIS series pipe size stainless steel exhaust protector G NPT (M) 55-55 / 600 () 600 () - 55 / 600 () 600 () - 55 / 6007 () 6007 () - 55 M5 - - 600 () vailable feature m vailable feature in only - Not available * TX solenoids are also approved according to N 6- (non electrical valves) () Provided with "SL" suffix () Not to use with MO suffix ORRING XMPLS: prefix () pipe thread basic number () S G 55 0 0V / 50 Hz S G 55 0 0V / 50 Hz S G 55 0 SL 0V / 50 Hz S G 55 0 MO 0V / 50 Hz SHT 55 0 MO 0V / 50 Hz S 55 0 0V / 50 Hz WSLPKF G 55 0 MO V / LPKF G 55 0 MO V / WSLI G 55 0 V / M 55 0 MO 0V / 50 Hz F G 55 G 0 MO 0V / 60 Hz voltage suffix () Prefixes F and V should always be used with the letter G in the basic number. ll leaflets are available on: www.asco.com 6-5- 0G-06/R0
SRIS 55-55 XPLNTION OF TMPRTUR RNGS OF SOLNOI VLVS Valve temperature range Operator ambient temperature range Total temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) The operator ambient temperature range is determined by the selected power level and the safety code The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I 5 Standard voltages (=) V - V (~) V - V - 5V - 0V (5) /50Hz; other voltages and 60Hz are available on request power ratings operator electrical ambient replacement coil / kit prefix inrush holding hot/cold temperature enclosure safety code type option range (TS) protection () ~ ~ = ~ = (V) (V) (W) (W) ( ) () (N 605) 0 V/50 Hz V/ asic power (P) S 55 0,5 /, -0 to +75 N 6070 IP65 moulded 005-7 005-0 WP/WS 55 0,5 /, -0 to +75 N 6070 IP67 steel/ss 0005-7 0005-0 NF/WSNF 55 0,5 - (-60) (7) -0 to +5/0/60 IIG x d II Gb T6/T5/T, II x tb III b IP66/67, alu./ss 0005-7 - 0 NF/WSNF - - - /, (-60) (7) -0 to +0/60/75 IIG x d II Gb T6/T5/T, II x tb III b IP66/67, alu./ss - 0005-0 M/WSM 55 0,5 /, -0 to +0 IIG x e mb II Gb T, II x tb III b IP66/67, steel /SS 000-7 00-0 PV 55 0,5 /, -0 to +65 IIG x mb II Gb T(~)/T(=), II x mb III b IP67 moulded - () - () 05 F/V 55 0,5 /, -0 to +5/0 NM type 7 and NM X 6-05 7-006 06 Low power (LP) S,5,5,5,7/,7-0 to +60 N 6070 IP65 moulded 005-07 005-0 07 WP/WS,5,5,5,7/,7-0 to +60 N 6070 IP67 steel/ss 006-07 006-0 0 LPKF/WSLPKF (),,, - -0 to +60 IIG x d II+H Gb T6/T5/T, II x tb III b IP66/67, alu./ss - () - () LPKF/WSLPKF - - - 0,5/0,5 () -0 to +60 IIG x d II+H Gb T6, II x tb III b IP66/67, alu./ss - () - () LPKF/WSLPKF - - -, () -0 to +0/0 IIG x d II+H Gb T6/T, II x tb III b IP66/67, alu./ss - () - () NF/WSNF - -,5 - /, (-60) (7) -0 to +75/0 IIG x d II Gb T6/T5, II x tb III b IP66/67, alu./ss - () (5) - () 0 M/WSM,5,5,5,7/,7-0 to +0/55 IIG x e mb II Gb T6/T5, II x tb III b IP66/67, steel /SS - () - () 0 PV - - -,7/,7-0 to +65 IIG x mb II Gb T6, II x mb III b IP67 moulded - - () 0 F/V - - -,7/,7-0 to +60 NM type 7 and NM X - - () LI () (6) - - - 0,5/0,5-0 to +60 IIG x ia II T6 Ga, II x tb III b (6) IP66/67, alu. - - () WSLI () (6) - - - 0,5/0,5-0 to +60 IIG x ia II T6 Ga, II x tb III b (6) IP66/67, SS - - () prefix option safety parameters U I = () I I P I L I I (V) (m) (W) (H) (µf) Low power (LP) LI/WSLI 500,5 0 0 LTRIL ONNTIONS prefix S WP, WS, M, WSM NF, WSNF, LPKF, WSLPKF PV LI, WSLI F, V connection () Temperature range can be limited by sealings () Refer to the dimensional drawings on pages: to 7 () LI/WSLI: heck the electrical characteristics in the corresponding catalogue pages () Multiple coil kits are available under TX/Ix, contact us (5) (WS)NF: Low Power, 0 V does not exist. Maximum voltage in is 5 V (6) LI/WSLI: Low Power, V only (LI: For use in zone 0 locations, see the installation conditions given in the I&M instructions) (7) The certified minimum temperature of this operator () LPKF/WSLPKF: V, max. ambient temp. +0, contact us ( V =, W) () Max. power ratings values: 5 V (, W), V (, W) - Not available Spade plug connector with cable gland N750-0 (ISO 00) for cables with an outer diameter from 6 to 0 mm M0 cable gland for cables with an outer diameter from 7 to mm. With an internal and external facility for an earthing or bonding conductor /" NPT threaded cable entry. nclosures are supplied without cable gland Moulded-in cable, standard length m /" NPT cable gland for cables with an outer diameter from 7 to mm. With an internal and external facility for an earthing or bonding conductor /" NPT conduits, standard length 5 cm ll leaflets are available on: www.asco.com 6-5- 0G-06/R0
ITIONL OPTIONS SRIS 55-55 Valves configured for external pilot air supply, TPL 057 Other pipe threads are available on request x mb (prefix "PV") solenoid can be supplied with various cable lengths ompliance with "UL", "S" and other local approvals available on request /" NPT (prefix "T") and M0 x.5 (prefix "T") conduits (aluminium or 6 SS) available for steel solenoid housing Set of stainless steel mounting screws, catalogue number: 70 (series 55) Set of two exhaust reducers, G/, catalogue number: 00 (series 55) INSTLLTION Multi language installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation / N-5/ spool valve supplied with one or two interface plates with NMUR mating surfaces. epending on function (/ N or 5/), position the plate (series 55) or one of the two plates (series 55) on the spool valve body before installing on actuator o not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for NO function. ontact us for function available in specific version owel pin (if necessary), bolts and gaskets are standard supplied I 650 Functional Safety (suffix SL). heck temperature range of valve body and solenoid for suitability. For probability of failure, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: = NPT (NSI.0.); G = G (ISO /) Prefix "NF/WSNF" enclosure is provided with a /" NPT threaded entry hole, M0 x,5 (prefix "T") is optional. oth are supplied without cable gland To comply with I 650 (SIL) the valves must be provided with a specific exhaust protector (see following pages) IMNSIONS (mm), WIGHT (kg) monostable Series 55 bistable Series 55 monostable/ bistable 5 5 5 0,5 / 5 Interface plates x / 5 5,6 mounting holes: 5, mm dia. (Spotfacing: mm dia., depth 5 mm); screws (Hc M5 x 5), engaged length: 7 mm 0 / 7 5 x / 5 5,6 One 5 mm dia. hole for dowel pin: - in position : / N function plate - in position : 5/ function plate O-ring seals (supplied) / 0 5,6, x / 7 5, mounting holes: 6,5 mm dia.(spotfacing: mm dia., depth 6 mm); screws (Hc M6 x 50), engaged length: 7 7,, TYP 0: TYP 0: S luminium; epoxy coated / ISI 6L SS poxy moulded NF/WSNF: N/I 6007-, 6007- I 5 / ISO 00 550 / 550 / 550 / 550 550 / 550 / 550 / 550 6 / 0 / NPT ll leaflets are available on: www.asco.com 5 0 56 0G-06/R0 6-5-
SRIS 55-55 IMNSIONS (mm), WIGHT (kg) TYP 0: Metal; epoxy coated / ISI 6 SS WP / WS: I 5 M / WSM: N/I 6007-7 + + 550 / 550 / 550 / 550 / 0 TYP 05: TYP 06: poxy encapsulated poxy encapsulated PV: N/I 6007- F/V: NM type 7, / IS-6 NSI NOT: applicable to solenoid only 550 / 550 / 550 / 550 55G0 / 55G0 / 55G0 / 55G0 / / "T" (M0x,5) "T" (/ NPT) 6 5 TYP 07: TYP 0: poxy moulded luminium; epoxy coated / ISI 6L SS S: I 5 / ISO 00 NF/WSNF: N/I 6007-, 6007-550 / 550 / 550 / 550 550 / 550 / 550 / 550 / NPT 0 / NPT 5 0 56 0G-06/R0 ll leaflets are available on: www.asco.com 6-5-5
SRIS 55-55 IMNSIONS (mm), WIGHT (kg) TYP 0: TYP 0: Metal; epoxy coated / ISI 6 SS poxy encapsulated WP / WS: I 5 PV: N/I 6007- M / WSM: N/I 6007-7 + + 550 / 550 / 550 / 550 550 / 550 / 550 / 550 / NPT / NPT 0 6 TYP : poxy encapsulated F/V: NM type 7, / IS-6 NSI NOT: applicable to solenoid only 55G0 / 55G0 / 55G0 / 55G0 / "T" (M0x,5) "T" (/ NPT) 5 TYP : TYP : luminium, cataphorese black painting / ISI 6L SS luminium, cataphorese black painting / ISI 6L SS LPKF/WSLPKF: N/I 6007-, 6007- LI / WSLI : N/I 6007-, 6007-550 / 550 / 550 / 550 550 / 550 / 550 / 550 / NPT / NPT / NPT 0 / NPT 5 6 0 5 6 0 ll leaflets are available on: www.asco.com 6-5-6 0G-06/R0
SRIS 55-55 IMNSIONS (mm), WIGHT (kg) Serie 55 Serie 55 weight () type prefixe option power level monostable bistable 55 55 55 55 0 S basic power 7 0,5 7 7 6,5 0,5,6,0,5 0 NF basic power 5 5 - - 0 57 - -,6,,0 6,6 0 WSNF basic power 5 5 - - 0 57 - -, 6, 7,00, 0 WP/WS/M/WSM basic power 05 0 - - 6 7 - -,7,,0 5,6 05 PV basic power 7,5 6 0 6,5,6,7,0,5 06 F / V basic power 7 0,5,5 75 00 6,5,6,7,0,5 07 S low power 7 07,5 6 6,5 0,5,6,0,5 0 NF low power 5 5 - - 0 57 - -,6,,0 6,6 0 WSNF low power 5 5 - - 0 57 - -, 6, 7,00, 0 WP / WS / M / WSM low power 05 0 - - 6 7 - -,7,,6 5,6 0 PV low power 7 06,5 6 5 6,5,6,7,0,5 F / V low power 7 06,5 75 5 6,5,6,7,0,5 LPKF low power - - 5,5 - -,6 5,0,5, WSLPKF low power - - 5,5 - -,,76,7 5, LI low power - - 5,5 - -,6 5,0,5, WSLI low power - - 5,5 - -,0,77,7 5, () Incl. coil(s) and connector(s) x d certified cable gland (on request) Three-core cable, length m able gland for unarmoured cable with 7 to mm dia. sheath 6 onnector rotatable by 0 increments (cable Ø 6-0 mm) Manual operator location, suffix MO xternal pilot air supply, / pipe size 0 able gland for unarmoured cable with 7 to mm dia. sheath onnectable pilot exhaust port Non-connectable pilot exhaust port SSORIS ø ø 0 / NPT / NPT Ø / NPT pilot exhaust protector part number 76-05-00 pilot top exhaust low power (SO solenoid interface) Ø M5 / / /,5 0 exhaust protector (stainless steel) ll leaflets are available on: www.asco.com 6-5-7 0G-06/R0
SRIS 55-55 ll leaflets are available on: www.asco.com 6-5- PI-06-005-G -- vailability, design and specifications are subject to change without notice. ll rights reserved. 0G-06/R0