m m Dimension Specification Identification I 1 I 2 1.1 1.2 1.3 1.4 1.5 1.6 1.8 1.9 Weigts Manufacturer Manufacturer s type designation Drive: electric (attery or mains),diesel,petrol,fuel gas,manual Type of operation:and,pedestrian,standing,seated,order-picker Load capacity / rated load l Load center distance C (in) Load distance, center of drive axle to fork X (in) Weelase 2.1 Service weigt 2.2 Axle loading, loaded front/rear 2.3 Axle loading, unloaded front/rear Weels, Cassis 3.1 Tires:solid ruer, superelastic, pneumatic, polyuretane 3.2 Tires size, front( x widt) 3.3 Tires size, rear( x widt) 3.5 Weels, numer front x rear (x=driven weels) 3.6 Track widt, front (in) 3.7 Track widt, rear 11 (in) Basic Dimensions 4.1 4.2 4.3 4.4 4.5 4.7 4.8 4.12 4.19 4.20 4.21 4.22 4.23 4.24 4.31 4.32 4.33 4.34 Mast / fork carriage tilt forward / ackward (α/β) Y (in) l l l degrees Lowered mast eigt 1 (in) Free lift 2 (in) Lift eigt 3 (in) Extended mast eigt 4 (in) Overead guard eigt 5 (in) Seat eigt / standing eigt 7 (in) Coupling eigt (in) Overall lengt l1 (in) Lengt to face of forks l2 (in) Overall widt 1 (in) Fork dimensions(ook type) S / E / L (in) Fork carriage ISO 2328, class / type A,B Fork-carriage widt 2 (in) Ground clearance, loaded, under mast m1 (in) Ground clearance, centre of weelase m2 (in) Aisle widt for pallets 1,000x1,200 crossways (LxW) Ast (in) Aisle widt for pallets 800x1,200 lengtways (WxL) Ast (in) 4.35 Turning radius Wa (in) 4.36 Smallest pivot point distance 13 (in) Performance Data 5.1 Travel speed, unloaded mp 5.2 Lift speed, loaded / unloaded fpm 5.3 Lowering speed, loaded / unloaded fpm Drawar pull, loaded l 5.7 Gradient performance, loaded / unloaded % 5.9 Acceleration time, loaded / unloaded(m) 5. Service rake Engine 6.1 Engine manufacturer / type 6.2 Engine power acc. to ISO 85 HP 6.3 Rated speed 1/min 6.4 No. of cylinder / cuic capacity cm 2 6.5 Fuel consumption acc. To VDI cycle l/ Oter Details 8.1 Type of drive control 8.2 Operating pressure (system / attac) ar 8.3 Oil volume l 8.4 Noise (at driver s ear according to DIN 12 053) d(a) Hyundai DIESEL seated 24 23.8 90.6 18,960 26,560 / 3,430 9,7 / 9,250 pneumatic 8.25--14 8.25--14 4 x / 2 63.1 / 168.3 98.4 54.9 16.7 185.0 137.8 82.2 2.4 x 5.9 x 47.2 Class IV 81.4 / 89.3 7.7 8.7 200.6 208.5 129.6 48.2 22.1 88.6 / 94.5 98.4 / 88.6 13,030 46.2 - FOOT (Hydraulic) MHI S6S-T 90.7 2,300 4,996 5.2 Full Auto 185 / 0 94 82 Hyundai DIESEL seated 24 24.2 90.6 20,380 2 / 3,690 9,7 /,660 pneumatic 8.25--14 8.25--14 4 x / 2 63.1 / 168.3 98.4 54.9 16.7 187.6 82.2 2.6 x 5.9 x 47.2 Class IV 81.4 / 89.3 7.7 8.7 203.0 2.8 1 48.2 22 86.6 / 94.5 98.4 / 88.6 13,080 40.7 - FOOT (Hydraulic) MHI S6S-T 90.7 2,300 4,996 5.3 Full Auto 185 / 0 94 82 Hyundai DIESEL seated,430 24 24.2 90.6 21,760 32,990 / 4,200 9,400 / 12,360 pneumatic 8.25--14 8.25--14 4 x / 2 63.1 / 168.3 98.4 54.9 16.7 142.5 82.2 2.6 x 5.9 x 47.2 Class IV 81.4 / 89.3 7.7 8.7 204.9 212.8 133.5 48.2 21.9 84.6 / 94.5 98.4 / 88.6 13,140 36.5 - FOOT (Hydraulic) MHI S6S-T 90.7 2,300 4,996 5.4 Full Auto 185 / 0 94 82 Some of te potos may include optional equipment. Nort America Only Forklift Trucks Environmentally - Friendly 50/60/ PLEASE CONTACT www.yundai-ce.com 2011. 11. Rev 2
FORKLIFT New criterion of Forklift Trucks Hyundai introduces a new line of 7E-series diesel forklift trucks. Excellent power and performance make your usiness more profitale. 02 03
Hig Power & Performance Powerful Engine MHI S6S-T Engine Te six cylinders turo-carged engine is uilt for power, reliaility and economy. Tis engine meets EPA tier III and EU stage IIIA emission regulations. 49.7HP/ 2,300rpm Te new master on te jo-site! Smoot running, efficient and ergonomically designed, 50/60/ series are made to meet your needs. Increased mast tilting angle Te mast tilting angle of degrees forward and degrees ackward, te operator can safely and rapidly perform loading and unloading jos. Wet disc rake system(option) Te wet disc rake system is virtually maintenance free and is enclosed to protect from dust and water. State-of-te-art ydraulic system Te latest large-capacity ydraulic system reacts quickly during operation, and a low-noise control valve increases ot efficiency and duraility. Fully ydrostatic power steering A ydraulic steering system always guarantees smoot and flexile steering, preventing overrun and kick-ack. Lift cylinder Tilt cylinder Down control valve Down safety valve Control valve Power Steering unit Steering cylinder Priority Hydraulic valve pump Tank Filter Fast and stale performance Being ale to quickly raise and lower te mast, as well as tilt it forward and ackward, providing te est operational conditions during unloading. Wen te truck is fully loaded, mast lowering speed is carefully controlled to ensure safety y te down control valve. Faster travel speed & gradeaility Te powerful ig-output engine provides greater acceleration, etter gradeaility and faster travel speed on any toug terrain or slope. Gradeaility(Loaded) 46.2% 40.7% 36.5% Travel speed(unloaded) 22.0 mp 21.9 mp 21.8 mp Lift Lock Tilt Lock Drive Lock OPSS (Operator Presence Sensing System) Control of mast tilting, lifting and lowering is not possile troug operation of te appropriate control wen te operator is not in te normal position.(option) 04 05
Comfortale Operation Adjustale steering weel Steering weel wit orn utton can e adjusted y a lever on te rigt-and side for te most comfortale operator position. Ergonomically designed wit te operator in mind! A design ased on uman engineering relieves fatigue and increases operator s efficiency. Operator friendly gauges and waterresistant monitor panel ➓ ➌➍ ➊ Parking rake lamp Directional indicators Fuel warning lamp Engine oil warning lamp Battery carging warning lamp Air cleaner filter warning ligt Working ligt indicator Water separator lamp ➎➏➐ ⓫ ⓮⓭ ➊ ➋ ⓬ ➒➑ Pre-eater indicator ➓ Water temperature gauge ⓫ Fuel gauge ⓬ Hour meter ⓭ Seat elt warning ⓮ OPS warning Easy and safe sift lever A single lever on te left side of te steering column gives te operator fast and easy controls of te direction. Easily adjustale suspension seat An attractive and adjustale seat, ased on a uman engineering design, provides great comfort, safety and duraility. Multi-function switc lever Multi-functional switc lever gives easy access to ligts and orn. Full floating overead guard mount Te anti-viration ruer is installed etween te guard and truck frame to reduce te source of viration and noise wile driving. Tis not only reduces operator s fatigue ut also increases safety. Quick response of operating control levers Only minimal operator s effort is required for precise, safe and productive control. Ergonomically positioned pedals Based on uman engineering, te accelerator, rake and incing pedals are optimally positioned for convenience wile operating te equipment. Cup older & console ox Additional storage spaces are located inside te operating space for operator s convenience. New ig visiility for safe operation Te operator is ale to work wit increased safety and accuracy due to a wider view mast. 06 07
Endurance & Safety Strong overead guard Te safety overead guard exceeds EEC and ANSI regulations and protects te operator during azardous jos. Enanced safety troug ig duraility! Safety and duraility are priorities in te design of te equipment. Easy access of electrical Components Various electric parts are centralized in das oard resulting in improvement in maintenance. Parking rake Toggle type parking rake requires less efforts from te operator to set. Ground clearance Te engine and transmission are assemled orizontally and positioned ig in te frame to protect expansive components during operation on rugged surface. Expansion ellows Te expansion ellows asors viration and reduces noise generated from te exaust gas system and also extends te life cycle of exaust gas system. 7.8 in Fuel tank safety valve Integrated safety ceck valve suts off fuel supply in te unlikely condition of a truck overturn. Higly durale split type drive axle Powersift transmission provides fast travel speed and quiet travel under any eavy load condition, and oosts work efficiency. Heavy duty single unit frame Heavy duty single unit type frame, designed on te asis of accurate structural analysis, guarantees duraility and safety. Large footoard & and grip Wide open step offers convenience and safety wen entering and exiting truck. Brigt, protected eadligts and rear working ligt Brigt, protected eadligts and rear working ligt are positioned for exceptional visiility. 08 09
Duraility Easy Maintenance Centralized design for easy service! An ideal arrangement of component parts ensures easy accesses and conveniences for te maintenance. Electrically monitored air filter Air cleaner sensor alerts te operator of a restricted air filter and allows replacement efore damage. Battery master switc Large open engine ood Higly accessile engine compartment assures fast and efficient maintenance. Key-locking fuel cap wit air vent Visile precleaner Efficient, accessile pre-cleaner provides for longer engine life. Automatic self locking gas spring Engine compartment ood is eld safely open y a self locking gas spring. Engine oil condition ceck Easy-to-access reservoir tank Brake fluid reservoir Higly visile, easily accessile reservoir makes for quicker daily inspections. Large tool ox Additional tool ox located in macine side for operator s convenience. Maintenance free attery Easy-to-cange radiator Easy cange air cleaner Te air filter is readily accessile for cleaning or replacement. An accessile, compact fuse ox for easy inspection Some of te potos may include optional equipment. Mecanic friendly fuel filter replacement 11
Specification Mast Specification W/o Load V270 7.5 93.1 145.3 8.3 *V300 7.1 170.1 125 125 18864 125 125 18969 168.9 181.9 125 125 19074 V350 139.0 8.9 176.8 125 125 19144 V370 146.9 112.8 184.7 197.6 125 125 19214 V400 8.7 118.7 196.5 209.4 125 125 19338 V450 178.3 130.5 216.2 229.1 125 125 19840 V500 198.0 235.9 248.8 125 125 20016 V550 217.7 0.2 255.6 268.5 125 125 20191 V600 237.4 160.0 275.2 288.2 125 9 20364 TF450/TS 179.5 1.0 218.3 228.5 50.2 125 125 20261 199.2 238.0 248.2 70.1 58.1 125 125 20464 220.5 116.7 259.3 269.5 78.0 65.9 125 695 20709 238.6 124.6 277.4 287.6 85.8 73.8 125 364 20902 Overall Heigt (in) Extended Free Lift (in) Tilt Angle (deg) Maximum Fork Heigt (in) Lowered W/o Load W/Std Load V270 7.5 93.1 4.0 8.3 *V300 165.8 170.1 V330 131.1 4.9 177.6 181.9 V350 139.0 8.9 18 V370 146.9 112.8 193.3 197.6 V400 8.7 118.7 205.2 V450 178.3 130.5 224.8 V500 198.0 V550 217.7 V600 TF450/TS witout side sift at 24 in LC(l) wit side sift at 24 in LC(l) Truck Weigt (Unloaded)(l) 20280 20385 20490 20560 20630 209.4 20754 229.1 21256 244.5 248.8 13120 21432 0.2 264.2 268.5 12679 21607 237.4 160.0 283.9 288.2 12348 21780 179.5 1.0 228.5 53.5 50.2 12900 217 199.2 246.7 248.2 61.4 58.1 12459 21918 220.5 116.7 267.9 269.5 69.3 65.9 13120 12128 22163 238.6 124.6 286.0 287.6 77.2 73.8 12789 11797 22356 witout side sift at 24 in LC(l) wit side sift at 24 in LC(l) Truck Weigt (Unloaded)(l) Overall Heigt (in) Extended Witout Load Wit Std Load Free Lift (in) Tilt Angle (deg) Lowered W/o Load W/Std Load V270 7.5 93.1 4.0 8.3 436 436 21661 *V300 165.8 170.1 436 436 21766 V330 131.1 4.9 177.6 181.9 436 436 21871 V350 139.0 8.9 18 436 436 21941 V370 146.9 112.8 193.3 197.6 436 436 22011 V400 8.7 118.7 205.2 209.4 436 436 22134 V450 178.3 130.5 224.8 229.1 436 436 22636 V500 198.0 244.5 248.8 436 5 22812 V550 217.7 0.2 264.2 268.5 436 14664 22987 V600 237.4 160.0 283.9 288.2 436 14333 23160 TF450/TS 179.5 1.0 228.5 53.5 50.2 436 14884 23096 199.2 246.7 248.2 61.4 58.1 436 14553 23299 220.5 116.7 267.9 269.5 69.3 65.9 2 14112 23543 238.6 124.6 286.0 287.6 77.2 73.8 14774 13671 23737 3 Stage TF500/TS full free lift TF560/TS TF600/TS Witout Load Wit Std Load (l) V137.8 in MAST 7,720 (l) (l) V177.2 in MAST V 236.2 in MAST,430 V137.8 in MAST (l),430 TF196.9 in MAST 14,330 7,720 6,6 TF236.2 in MAST (l) TF196.9 in MAST V236.2 in MAST (l) V177.2 in MAST V236.2 in MAST 6,6 V137.8 in MAST 14,330 V177.2 in MAST TF236.2 in MAST TF196.9 in MAST TF236.2 in MAST Fwd Bwd Maximum Fork Heigt (in) Mast Type 2 Stage limited free lift Truck Weigt (Unloaded)(l) 4.9 3 Stage TF500/TS full free lift TF560/TS TF600/TS wit side sift at 24 in LC(l) 131.1 Mast Type 2 Stage limited free lift witout Witout Load Wit Std Load (deg) side sift at 24 in LC(l) W/Std Load Fwd Bwd V330 3 Stage TF500/TS full free lift TF560/TS TF600/TS Tilt Angle Lowered Mast Type 2 Stage limited free lift Free Lift (in) Overall Heigt (in) Extended Maximum Fork Heigt (in) Various Attacments Side Sift Hinged Fork Hinged Bucket Rotating Fork Pus Pull Rotating Roll Clamp Load Stailizer Fwd Bwd Carton Clamp Pallet Invert Drum Clamp Bale Clamp Load Extender Fork Positioner Optional Items FORK (LxWxT)(in) (SHAFT. HOOK TYPE). 53.1 X 5.9 X 2.4. 59.1 X 5.9 X 2.4. 78.7 X 5.9 X 2.4. 94.5 X 5.9 X 2.4 60/ (SHAFT TYPE). 53.1 X 7.1 X 2.4. 59.1 X 7.1 X 2.8. 78.7 X 7.1 X 2.8. 94.5 X 7.1 X 2.8. 70.9 X 5.9 X 2.4. 70.9 X 7.1 X 2.8 60/ (HOOK TYPE). 53.1 X 5.9 X 2.6. 59.1X 5.9 X 2.6. 70.9 X 5.9 X 2.6. 78.7 X 5.9 X 2.6. 94.5 X 5.9 X 2.6. MCV 3-SPOOL / 4-SPOOL / 5-SPOOL. Internal Piping. HOSE-REEL. 3 STAGE FULL FREE LIFT DUAL FREE TYPE MAST. Seat Arm Rest, ip rest. Solid Tire. over soe 70.9 / 78.7 / 86.6 / 90.6 *Standard 12 13