TURNING UP THE HEAT SINCE 1965 For over 50 years, Frost Fighter has been manufacturing the highest quality, most reliable and durable line of Industrial Grade Portable Heating Systems in the industry at our Winnipeg, Manitoba CANADA facility. Our commitment to ensure we engineer the safest, most technically advanced and efficient systems has made the Frost Fighter brand the premier choice for customers demanding proven, dependable heating systems in the harshest temperatures & weather environments from the North slope of Alaska to the far reaches of South America, Asia and beyond. With a heating lineup from 170,000 BTU/h to 1,500,000 BTU/h, you can be assured of having a temporary heating solution designed to meet your project s needs. All Frost Fighter heaters are individually tested, meet OSHA standards and are either CSA or ETL certified. Heater Applications General Construction Concrete Curing Bridge/Road building Restoration/Relief Equipment Per-Heating Masonry Mining Oil & Pipeline Industries Drying of Paint/Coatings Livestock Temperature Control Aircraft Pre-Heating Dam Building Projects Agricultural Moisture Control Tent & Event Heating Pest Control We also provide temporary cooling solutions too! ICE Air Portable Cooling Solutions ICE Air s innovative design have continuously redefined the portable cooling industry. In fact, we are making history with the introduction of the ICEberg Series, which is several steps ahead of the competition. We believe our products should evolve, improve and innovate. Available in both Air & Water cooled from 1-10 ton. The ICEberg Series is so small and full of standard features, you won t believe it! Find more specs and product information at frost-fighter.com Distributed by:
Specifications IDH200QR IDH400QR IDH500QR Maximum Heating Capacity 170,000 BTU/h 350,000 BTU/h 500,000 BTU/h Heated Air Volume 1,610 CFM 2,800 CFM 4,800 CFM Maximum Static Pressure 5.0" 2.8 3.5 AVAILABLE IN OIL / DIESEL OR LP / NG IDH200QR IDH200QR - LP / NG Running Sound Level < 74dB < 68dB < 62dB Discharge Temperature up to 230 F (110 C) up to 290 F (143 C) up to 250 F (121 C) Insulated Jacket No Outlet Configuration Single 12 Dual 12 or Single 16 Dual 12 or Single 16 Compact, lightweight and extremely powerful, the IDH200QR is equipped with standard recirculation, High Static Pressure, low db noise level and is capable of up to 100ft of total duct length. A cool to the touch jacket, stainless steel multi-pass heat exchanger, 3-trials for ignition and EZ Ball Valve switchover features make this system ideal for applications where portability, durability and reliable operation are necessary. Find more specs and product information at www.frost-fighter.com Inlet Diameter 12 16 16 Maximum Total Duct Length Up to 100ft Up to 100ft per Outlet Up to 100ft per Outlet Environmental Spill Containment No Fuel Tank Capacity (US Gal) 18 Std. 42 / Opt. 60 Std. 42 / Opt. 60 Approx. Run Time 15 hours 16.5hrs / 24hrs 14hrs / 20hrs Supply Gas Pressure (LP/NG) 1/2lb PSI max. or 7-14 w.c. 1/2lb PSI max. or 7-14 w.c. 1/2lb PSI max. or 7-14 w.c. Power Requirement 120V - 15amp 120V - 15amp 120V 20amp Running Amps 11.0 9.2 14.8 Crated Dimensions 64 L x 36 W x 42 H 83 L x 37 W x 52 H 83 L x 37 W x 52 H Approximate Crated Weight 320lbs 580lbs 580lbs Approvals/Certification CSA CSA CSA / ETL IDH400QR & IDH500QR Not only are the IDH400QR & IDH500QR the most efficient, durable and reliable Indirect Fired heaters in this popular class, they also boast one of the quietest operating db noise levels available. Combined with standard recirculation, fully insulated jacket, High Static Pressure, adaptable duct attachment, stainless steel multi-pass heat exchanger, 3-trials for ignition and EZ Ball Valve switchover features, the IDHQR Series is designed and engineered to provide excellent fuel savings and trouble-free operation in the harshest environments. Find more specs and product information at www.frost-fighter.com IDH400/500QR OIL / DIESEL 2
IDF Series Specifications IDF350 IDF500 IDF500HS Maximum Heating Capacity 350,000 BTU / h 500,000 BTU / h 500,000 BTU / h Heated Air Volume 2,500 CFM 3,100 CFM 3,250 CFM Maximum Static Pressure 0.5" 0.5 2.3 AVAILABLE IN OIL / DIESEL OR LP/NG IDF 350-500 - 500 HS - LP / NG The perfect solution where clean, dry heat is required to complete a project on time and within budget. Ductable up to 50ft, our IDF lineup comes standard with many features designed for safety, performance and efficiency not found on competitive systems: Fully Insulated Jacket, Industrial Grade Beckett Burner (Oil/Diesel), Stainless Steel Heat Exchanger, Satin Coated Steel, Powder Coated Paint, Environmental Spill-Containment Tank (Oil/Diesel), LED Polarity Lighting, High Limit Safety Switch, 6-Ply Pneumatic wheels, Adaptable Duct Connection, 3-Trials For Ignition (LP/NG) and Ball Valve Switchover from Propane to Natural Gas (LP/NG). Discharge Temperature up to 250 F (121 C) up to 250 F (121 C) up to 250 F (121 C) Insulated Jacket Available Outlet Configuration Dual 12 or Single 16 Dual 12 or Single 16 Dual 12 or Single 16 Maximum Total Duct Length Up to 50ft Up to 50ft Up to 75ft Fuel Tank Capacity (US Gal) Std. 42 / Opt. 60 Std. 42 / Opt. 60 Std. 42 / Opt. 60 Environmental Spill-Containment Approximate Run Time 16.5 hours / 24 HRS 14 hours / 20 HRS 14 hours / 20 HRS Supply Gas Pressure (LP/NG) 1/2lb PSI max. or 7 14 w.c. 1/2lb PSI max. or 7 14 w.c. 1/2lb PSI max. or 7 14 w.c. 3-Trials For Ignition (LP/NG) Power Requirement 120V - 15amp 120V - 15amp 120V - 25amp Crated Dimensions 83 L x 37 W x 52 H 83 L x 37 W x 52 H 83 L x 37 W x 52 H IDF500HS HIGH STATIC In addition to all the standard features included in our standard IDF Series, the HS models are equipped with a 6-Bade Fan and 1.5HP motor which provide 2.3 of static pressure to allow for duct lengths of up to 100ft. The HS Series also offers optional recirculating capabilities to ensure maximum fuel efficiency. Approximate Crated Weight 580lbs 580lbs 580lbs Approvals/Certification CSA / ETL CSA / ETL CSA / ETL IDF 350 500 500 HS OIL / DIESEL IDF 350 500 500 HS - LP / NG 3
SPECIFICATIONS IHS700 IHS1500 Maximum Heating Capacity 700,000 BTU / h 1,500,000 BTU / h Dual Stage Firing No Lo-Fire & Hi-Fire AVAILABLE IN OIL / DIESEL OR LP / NG (BASE MOUNTED) For robust, powerful and dependable heating power from 700,000 1,500,000 BTU/h, the IHS Series offers the highest static pressure in the industry of up to 5. With duct connections of 16 & 20 clean, dry heat can be delivered up to 100ft from each outlet. Equipped with standard air return, the IHS Series can be configured to provide maximum fuel efficiency savings. Heated Air Volume 4,600 CFM 11,000 CFM Maximum Static Pressure 4.0 5.0 Insulated Shell Outlet Configuration dual 16 dual 20 Inlet Configuration dual 16 dual 20 Maximum Total Duct Length up to 100ft per Outlet up to 100ft per Outlet Fuel Tank Capacity (US Gal) optional 175 US Gal No Environmental Spill-Containment No Approximate Run Time with Tank 35 hours No Supply Gas Pressure (LP/NG) 1/2lb PSI max. or 7-14 w.c. 1/2lb PSI max. or 7-14 w.c. IHS 1500 3-Trails For Ignition (LP/NG) Optional EZ Burner Switchout* Standard Power Requirement 208/230V- 1 or 3 Phase 208/230V- 3 Phase Optional Power Configurations 460V or 575V - 3Phase 460V or 575V - 3Phase Dimensions 100 L x 35 W x 59 H 156 L x 44 W x 75 H Approximate Weight 1,600lbs 1,600lbs Approvals/Certification CSA / ETL CSA / ETL *When option is purchased with Heater. IHS 700 4
AVAILABLE IN OIL / DIESEL A powerful, robust heating solution for remote areas or power starved applications. Equipped with dual industry proven IDF500HS Oil/Diesel heaters delivering a combined 1,000,000 BTU/h and 2.3 of static pressure for longer duct runs of up to 100ft per outlet. Each heater is independently mounted on slide rails for easy access and offers the flexibility to use standard power vs generator power if available. A complete tow package with on-board fuel tanks and generator make this the ideal heater for the toughest job-site environments. IDF1000 ICE FIGHTER Self Contained Series Specifications IDF 1000 - ICE FIGHTER Maximum Heating Capacity Heated Air Volume up To 1,000,000 BTU/h Dual 3,250 CFM Maximum Static Pressure Dual 2.3 Available Outlet Configuration Quad 12 or Dual 16 Maximum Total Duct Length Total On-Board Fuel Capacity Environmental Spill-Containment Approximate Run Time Duct & Tool Storage Adjustable Ball/Pintle Hitch Industrial Quality Generator 3-Cylinder Liquid Cooled Engine Block Heater / Battery Trickle Charge SHORE Power / Requirement 120VAC / 15AMP 6FCI Convenience Outlet Interior Lighting Trailer Up to 75ft per outlet 260 US Gal 35 hrs Stamford 11.4Kw Isuzu or Kubota / Dual 120V - 25amp 7000lb Tandem Axle w/ Electric Brakes Dimensions 120 L x 96 W x 72 H Approximate Weight Approvals/Certification 4,600lbs CSA 5
DF1500 Frost fighter offers a number of duct and common accessories that ensures you have everything you need to complete a heating package that s ready for installation. For additional accessory options, please contact Frost Fighter for more details. AVAILABLE IN LP / NG DF400 An economical heating solution for well-ventilated heating projects, the DF Series are proven to be extremely durable workhorses that provide quick heat and reliable operation. DF Series Specifications DF400 DF1500 Maximum Heating Capacity 400,000 BTU / h 1,500,000 BTU / h Dual Stage Firing No / Hi-Fire & Lo-Fire Fan Motor 1/2HP 1HP Air Outlet Diameter 16 24 Supply Gas Pressure 1/2lb PSI max. or 7-14 w.c. 1/2lb PSI max. or 7-14 w.c. Inlet Pipe Connection 3/4 NPT 1-1/4 NPT 3-Trails For Ignition Ball/Valve Switchover Thermostat Control Included Included Manifold Gas Pressure 1.4 w.c. LP / 3.5 w.c. NG 1.6 w.c. LP / 3.6 w.c. NG Gas Consumption (Propane) 157 CFH @ 4.35 US Gal/Hr 589 CFH @ 16.5 US Gal/Hr Gas Consumption (Natural Gas) 390 CFH @ 10.7 US Gal/Hr 1,461 CFH @ 40.8 US Gal/Hr Power Requirement 120V / 15amp 120V / 20amp Crated Dimensions 51 L x 31 W x 33 H 75 L x 40 W x 53 H Approximate Crated Weight 210lbs 420lbs Approvals/Certification ETL ETL ITEM AVAILABLE OPTIONS EconoDuct Synthetic Canvas Duct 12 Diameter High Temperature SUPPLY DUCT 12, 16 & 20 Diameters Silver Silicone SUPPLY DUCT 12 & 16 Diameters Yellow Poly RETURN Duct 12, 16 & 20 Diameters Solid/Perforated LAY-FLAT Duct 12 & 16 Diameters Remote Thermostat 2ft or 25ft Cord Lengths 1st Stage Regulator (IDF Models) Product Code #50276A 2nd Stage Regulator (IDF Models) Product Code #50274A GeniSys Diagnostic Reader Tool Product Code #60165 ECONODUCT W/ PIN LOCK HIGH TEMPERATURE SUPPLY DUCT W/ BELT CUFF SILVER SILICONE SUPPLY DUCT W/ BELT CUFF YELLOW POLY RETURN DUCT SOLID OR PERFORATED LAY-FLAT DUCT REMOTE THERMOSTAT GENISYS DIAGNOSTIC READER TOOL 1ST STAGE REGULATOR 2ND STAGE REGULATOR 6