Professional-Grade Lubricants UltraLube Product Catalog

Professional-Grade Lubricants UltraLube Product Catalog Bulk Sizes Available Catalog Number 90301 UltraLube.com 1

UltraLube not only outperforms traditional petroleum-based products but is also safer for you and the environment. Superior Performance n UltraLube base oils have * the lubricity of petroleum base oils n Naturally higher viscosity, which reduces friction, heat and wear especially in high-speed applications n Last longer than petroleum-based lubricants and are less likely to thin down at higher temperatures n Higher flash and fire points than petroleum-based products n Mix readily with conventional petroleum-based products 1 A clear leader For more than 40 years, LubriMatic has been developing and distributing superior lubrication products. LubriMatic serves the industrial, hardware, marine, automotive and agricultural markets, as well as many industries requiring professional-grade greases, oils, lubricants and penetrants. * The above chart shows the result of this test (ASTM D3233) conducted by the National Ag-Based Lubricants Center (NABL) using UltraLube high oleic base oil and three different viscosities of petroleum base oils. Compare the UltraLube base oil result of 1,756 lbf (pounds of force) to the average of petroleum base oils of 434 lbf UltraLube has four times the lubricity, or friction reducing capability of petroleum-based oil.

Powerful, professional-grade UltraLube instantly penetrates, creating long-lasting bonds to metal and even plastic parts. n Vegetable base oil molecules are polar; they bond and stick to metal. Petroleum base oil molecules aren t; they simply run off. UltraLube lubricants are professional-grade, eco-safe, non-toxic products manufactured from a renewable resource biodegradable vegetable base stock oil and made in the USA. n Biodegradable n Base oil is derived from vegetables a renewable resource n Contain no zinc or chlorine n No harsh odors n Neutral in water n Are safer for you, your family and the environment TABLE OF CONTENTS Lubricants, Penetrants, Rust & Corrosion Inhibitors 3-4 Greases 5-8 Oils 9-14 2

10443 10444 Lubricants, Penetrants, Rust & Corrosion Inhibitors Multi-Purpose Lubricant & Penetrant UltraLube works wonders for hundreds of applications from industrial requirements in the workplace to simple uses in and around the home. Use it to penetrate rusted and sticking parts, or to lubricate sliding parts, rollers, chains, hinges, doors, windows almost anything you have that sticks, squeaks, binds or needs to slide smoothly. 10443 8 oz. (227 grams) aerosol. 12 per case-cut carton. 10444 12 oz. (340 grams) aerosol. 12 per case-cut carton. 10445 2 fl. oz. (59 ml) pump spray. 24 per countertop display carton. 10446 8 fl. oz. (224 ml) trigger spray. 12 per case-cut carton. 10447 1 quart (.946 l) refill with yorker cap for easy refilling. 12 per carton. 10448 1 gallon (3.78 l) refill. 4 per carton. 10449 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10450 (not shown) 55 gallon (208.1) drum. Flash Point 590 F (310 C), Pour Point -4 F (-20 C) 10445 10446 FEATURES & BENEFITS: - Excellent rust and corrosion preventer - Makes a great general purpose drilling and tapping fluid - Works well on plastics and other non-metallic surfaces that petroleum-based products can damage - Lasts longer and is less likely to thin down at higher temperatures - Outstanding dielectric properties - Water neutral - No harsh odors - Environmentally non-toxic and readily biodegradable - Safer around children and pets than petroleum-based products - Contains no zinc or chlorine non-aerosol products contain no VOCs - Listed and registered by the USDA BioPreferred SM program 10447 10448 Industrial-Grade Penetrant Formulated specifically to penetrate and loosen rusted and frozen metallic parts, UltraLube s low viscosity formula creeps in all directions, attacking rust in the most difficult-to-reach places. Ideal for rusted nuts, bolts, hinges and automotive restoration projects. Excellent for exhaust systems and shock and strut mounting bolts. UltraLube Industrial-Grade Penetrant has no harsh odor and a 2X higher flash point than most conventional penetrants. It also deters water and leaves behind a protective film to help prevent future rust and corrosion. 10460 (not shown) 8 fl. oz. (224 ml) trigger spray. 12 per case-cut carton. 10461 1 quart (.946 l) refill with yorker cap for easy refilling. 12 per carton. 10462 1 gallon (3.78 l) refill. 4 per carton. 10463 11 oz. (311 grams) aerosol. 12 per carton. Flash Point 331 F (166 C) 10461 3 10462

Industrial-Grade Rust & Corrosion Inhibitor UltraLube Industrial-Grade Rust & Corrosion Inhibitor is formulated as a preventative coating for all ferrous metal to prevent rust and corrosion during periods of storage. UltraLube locks out the elements to protect your equipment. It works on lawn mower decks to help prevent grass build-up and keeps chutes clean, and on snow removal equipment to prevent snow and ice build-up. Our biobased, biodegradable, non-toxic formula means it is safe for the environment. Outstanding corrosion protection for boats, trailers and ATVs. Protects agricultural and construction equipment from the elements. 10466 11 oz. (311 grams) aerosol. 12 per carton. Flash Point 307 F (153 C) Industrial-Grade Lubricant UltraLube penetrates and bonds to metal, providing long-lasting superior lubrication. UltraLube Industrial-Grade Lubricant is formulated to work under high-heat and highload conditions while providing superior protection for your equipment. Use on chains, slides, rollers, hinges, pivot points, gears, cables, metal-to-metal contact areas or oil lubricated bearings. 10464 11 oz. (311 grams) aerosol. 12 per carton. 10465 8 fl. oz. (224 ml) trigger spray. 12 per case-cut carton. READY FOR ANYT HING Perfect for 100s of home and professional uses. Flash Point 581 F (305 C), Pour Point -17 F (-27 C) Floor Display UltraLube Multi-Purpose Lubricant & Penetrant Floor Display 10440 Contains (40) 10444 and (28) 10446. Measures: 18.5" (47 cm) W x 13.25" (33.7 cm) D x 42" (107 cm) H. Weight: 72 lbs. (32.7 kg). Prepackaged with product. 10463 10466 10464 10465 10440 4

10300 10301 Greases UltraLube professional-grade, biobased greases have a naturally higher viscosity index than petroleum-based greases, so they re less likely to thin down at higher temperatures, resulting in less friction, heat and wear. Contain no VOCs and readily mix with petroleum-based greases. Non-flammable, with extremely high flash points. Non-toxic, biodegradable formulations are recommended for environmentally sensitive areas near waterways. Most UltraLube greases are USDA BioPreferred SM registered and listed. Multi-Purpose Lithium Grease Delivers long-lasting high performance for chassis, farm and plant machinery, and general purpose lubrication. Contains advanced EP additives. Prevents rust and corrosion for metal-to-metal contact areas, heavy loads and extreme pressure applications. USDA BioPreferred grease. 10300 3 oz. (85 grams) cartridge. 3 cartridges per bag. Total 9 oz. (255 grams) 10 bags per case-cut carton. 10301 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10302 16 oz. (454 grams) tub. 12 per case-cut carton. 10303 (not shown) 35 lb. (15.8 kg) plastic pail. 10304 (not shown) 120 lb. (54.4 kg) metal drum. 10305 (not shown) 400 lb. (181.4 kg) metal drum. NLGI Grade 2, LB Rating* Drop Point 374 F (190 C), Flash Point 619 F (326 C) Operating Temperature Range -40 F (-40 C) to +274 F (+134 C) Base Type Lithium, Color Amber 10302 10373 Low-Temperature Multi-Purpose Lithium Grease A special low-temperature, cold weather climate grease formulated to pump easily at temperatures to -20 F (-30 C). Has the same features and applications as our Multi-Purpose Lithium Grease. Great for snowmobiles, snowblowers, ATVs and other winter equipment. 10373 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10374 (not shown) 35 lb. (15.8 kg) plastic pail. Drop Point 381 F (194 C), Flash Point 619 F (326 C) Operating Temperature Range -22 F (-30 C) to +302 F (+150 C) Base Type Lithium Complex, Color Red Grease Identification / Specification / Application Chart 5 Grease Name Soap Base NLGI Grade NLGI Certified GC-LB 4-Ball Weld (kgf) ASTM D2596 4-Ball Load Wear Index (kgf) ASTM D2596 4-Ball Wear (mm) ASTM D2266 Timken OK Load (lbs.) ASTM D2509 Drop Point ( F) ASTM D566/D2265 5th Wheel Trailer Grease Lithium 2 N/A 400 58 0.52 N/A 338 Gray/Black Good Color Water Washout Cotton Picker Spindle Grease Lithium 2 LB N/A N/A 0.40 N/A 374 Golden/Brown Very Good Disc/Drum Brake Wheel Lithium Complex 2 GC-LB 500 60 0.47 40 527 Blue Excellent Bearing Grease Drill Rod Grease Lithium 2 N/A 500 N/A 0.55 N/A 390 Dark Green/Black Outstanding H1 Food Machinery Grease Aluminum Complex 2 N/A 200 N/A 0.48 N/A 523 Golden Very Good LMX Red Grease Lithium Complex 2 GC-LB 500 60 0.47 40 527 Red Excellent Marine & Trailer Bearing Grease Lithium Complex 2 GC-LB 500 60 0.47 40 527 Blue Excellent Moly EP Grease Lithium 2 LB 400 58 0.55 45 387 Silver/Black Very Good Multi-Purpose Lithium Grease Lithium 2 LB 250 58 0.54 35 374 Amber Very Good Low Temperature Multi-Purpose Lithium Grease Lithium Complex 1 N/A 500 N/A 0.47 N/A 381 Red Very Good White Lithium Grease Lithium 2 LB 250 51 0.54 25 387 Off White Very Good

White Lithium Grease Recommended for chassis, farm and plant machinery, and general purpose lubrication. Designed for metal-to-metal contact areas, heavy loads and extreme pressure applications. Contains advanced EP additives. Prevents rust and corrosion. Has outstanding dielectric properties. Silicone-free and recommended for plastic parts. USDA BioPreferred grease. 10307 8 oz. (227 grams) squeeze tube. 6 per case-cut carton. 10308 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10309 (not shown) 35 lb. (15.8 kg) plastic pail. 10310 (not shown) 120 lb. (54.4 kg) metal drum. 10311 (not shown) 400 lb. (181.4 kg) metal drum. NLGI Grade 2, LB Rating* Drop Point 387 F (197 C), Flash Point 619 F (326 C) Operating Temperature Range -40 F (-40 C) to +287 F (+141 C) Base Type Lithium, Color Off White Moly EP Grease Use in applications where a molybdenum disulfide additive is recommended. Designed for metal-to-metal contact areas, sliding motions, sleeve-journal rotating shafts, and farm and plant machinery. USDA BioPreferred grease. 10314 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10317 (not shown) 35 lb. (15.8 kg) plastic pail. 10318 (not shown) 400 lb. (181.4 kg) metal drum. NLGI Grade 2, LB Rating* Drop Point 387 F (197 C), Flash Point 619 F (326 C) Operating Temperature Range -40 F (-40 C) to +287 F (+141 C) Base Type Lithium, Color Silver to Black 10307 10308 LMX Red Grease A premium, water-resistant EP grease that meets NLGI s tough GC-LB specifications. Excellent for auto and truck chassis and wheel bearings, trailer bearings, fleet, farm, plant and industrial applications. Ideal for heavy load applications. USDA BioPreferred grease. 10320 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10321 16 oz. (454 grams) tub. 12 per case-cut carton. 10322 (not shown) 35 lb. (15.8 kg) plastic pail. 10323 (not shown) 120 lb. (54.4 kg) metal drum. 10324 (not shown) 400 lb. (181.4 kg) metal drum. NLGI Grade 2, GC-LB Rating* Drop Point 527 F (275 C), Flash Point 619 F (326 C) Operating Temperature Range -40 F (-40 C) to +427 F (+219 C) Base Type Lithium Complex, Color Red 10314 10320 10321 5th Wheel Trailer Grease Contains EP and graphite additives. Protects ferrous metals from rust and corrosion. Individually packed in special smash packs. Simply toss the pack on the plate and drop the trailer. The pack disintegrates and the grease is automatically distributed across the plate. USDA BioPreferred grease. 10337 2 oz. (57 grams) pack. 24 per countertop display carton. NLGI Grade 2 Drop Point 338 F (170 C), Flash Point 619 F (326 C) Operating Temperature Range -40 F (-40 C) to +350 F (+176 C) Base Type Lithium, Color Gray to Black * See NLGI Ratings breakdown on page 8 10337 6

Greases (continued) Disc/Drum Brake Wheel Bearing Grease A premium, water-resistant EP grease that meets NLGI s tough GC-LB specifications. Excellent for automotive and truck chassis and wheel bearings, trailer bearings, fleet and farm wheel and trailer bearings. Ideal for heavy load applications. USDA BioPreferred SM grease. 10333 10333 16 oz. (454 grams) tub. 12 per case-cut carton. 10334 (not shown) 35 lb. (15.8 kg) plastic pail. 10335 (not shown) 120 lb. (54.4 kg) metal drum. 10336 (not shown) 400 lb. (181.4 kg) metal drum. NLGI Grade 2, GC-LB Rating* Drop Point 527 F (275 C), Flash Point 619 F (326 C) Operating Temperature Range -40 F (-40 C) to +427 F (+219 C) Base Type Lithium Complex, Color Blue H1 Food Machinery Grease Approved by the NSF and meets criteria established by the USDA H-1 and U.S. FDA regulation 21 CFR 178.3570 Lubricants With Incidental Food Contact. Excellent for lubrication of bearings, gears and machine slides. Has EP additives to protect under heavy shock loads. Provides superior adhesion and protects all ferrous metal components from rust and corrosion. USDA BioPreferred grease. 10340 10340 14 oz. (397 grams) cartridge. 10 per case-cut carton. 10342 35 lb. (15.8 kg) plastic pail. NLGI Grade 2 Drop Point 523 F (273 C), Flash Point 619 F (326 C) Operating Temperature Range 32 F (0 C) to +420 F (+215 C) Base Type Aluminum Complex, Color Golden Marine & Trailer Bearing Grease Special water washout-resistant formulation is ideal for marine applications. Meets NLGI s tough GC-LB specifications. Provides excellent corrosion protection under severe conditions. Use on wheel bearings (including disc brake applications), swivel hinges, pins, winches, anchor chain reels, steering cables, gimbal bearings and other marine parts that require greasing. 10342 10325 3 oz. (85 grams) cartridge. 3 cartridges per bag. Total 9 oz. (255 grams). 10 bags per case-cut carton. 10326 14 oz. (397 grams) cartridge. 10 per case-cut carton. NLGI Grade 2, GC-LB Rating* Drop Point 527 F (275 C), Flash Point 619 F (326 C) Operating Temperature Range -40 F (-40 C) to +427 F (+219 C) Base Type Lithium Complex, Color Blue 10325 10326 7 * See NLGI Ratings breakdown on page 8

Drill Rod Grease A premium biobased, biodegradable drilling lubricant. Formulated to be applied on wet surfaces and has superior water adhesion and water washout resistance. Improves efficiency through superior lubricity and better coefficient of friction than most petroleumbased greases. Has a higher flash point than major petroleum-based greases. Contains advanced extreme pressure additives for excellent protection. 10351 35 lb. (15.8 kg) plastic pail. 10352 (not shown) 400 lb. (181.4 kg) metal drum. NLGI Grade 2 Drop Point 390 F (199 C), Flash Point 619 F (326 C) Operating Temperature Range 0 F (-18 C) to +290 F (+143 C) Base Type Lithium, Color Dark Green to Black Creates long-lasting bonds to metal and plastic Cotton Picker Spindle Grease A premium biobased, biodegradable grease to meet the demanding applications of the cotton picking industry. The high film strength of vegetable oil provides superior lubricity. Excellent oxidative and high temperature stability. Higher flash point than petroleumbased greases for increased safety. Meets the John Deere Cotton Picker Spindle Performance Tests. 10363 35 lb. (15.8 kg) plastic pail. 10364 (not shown) 400 lb. (181.4 kg) metal drum. NLGI Grade 2, LB Rating* Drop Point 374 F (190 C), Flash Point 619 F (326 C) Operating Temperature Range -40 F (-40 C) to +274 F (+134 C) Base Type Lithium, Color Golden to Brown John Deere is a registered trademark of Deere & Company. 10351 UltraLube Grease Floor Display 10390 Contains (40) 10301 and (24) 10321. Measures 18.5" (47 cm) W x 13.25" (33.7 cm) D x 42" (107 cm) H. Weight: 73 lbs. (33.1 kg). Prepackaged with product. NLGI RATINGS BREAKDOWN* NLGI Grades (000, 00, 0, 1, 2, 3, 4, 5) The National Lubricating Grease Institute (NLGI) rates consistency grades of grease on a scale compared to the cone penetration value. The rating goes from the thinnest (000), almost watery, to thickest (5) or tar-like. Grade 2 is the most commonly used grade in the world. 10363 Rating Recommended Usage ( LB, GC-LB ). Most modern vehicles, heavy duty trucks and fleets require chassis grease with a rating of LB and wheel bearing/trailer bearing grease with a rating of GC-LB. Rating L G LA LB GA GB GC Recommended Usage Chassis and U-joint Wheel bearing Mild duty Mild to severe duty Mild duty Mild to moderate duty Mild to severe duty 10390 8

10424 10420 Oils UltraLube professional-grade, biobased oils have a naturally higher viscosity index than petroleum-based oils, so they re less likely to thin down at higher temperatures, resulting in less friction, heat and wear. Contain no VOCs, are non-flammable and have extremely high flash points. Recommended for industrial environments as well as environmentally sensitive areas. UltraLube oils are biodegradable and most are registered by the USDA BioPreferred program. SM Air Tool Oil A high quality biodegradable pneumatic oil with EP additives for long tool life. Specially blended with emulsifiers to pick up moisture. Superior lubricity allows for fast action and prevents sticking. Excellent rust and oxidation protection. Recommended for all types of pneumatic tools and equipment. USDA BioPreferred oil. 10424 8 fl. oz. (236 ml) flip-top bottle. 12 per case-cut carton. Pour Point -17 F (-27 C), Flash Point 468 F (242 C) Chain Saw Bar & Chain Oil Tackifiers resist sling-off at high chain speeds. Reduces vibration and noise for smooth chain operation. Superior lubricity prevents smoking when under load. Protects all ferrous metal components from rust and corrosion. Suitable for both automatic and manual applications. Ecosafe mist is biodegradable and neutral in water. 10420 1 quart (.946 l) with yorker cap for easy filling. 12 per carton. 10421 1 gallon (3.78 l) refill. 4 per carton. Pour Point -2 F (-19 C), Flash Point 417 F (214 C), SAE Viscosity 30 10421 Marine High Viscosity Lower Unit Gear Lube SAE 80w/90 A biobased, biodegradable high performance lower unit gear oil designed for high performance, high load and high torque applications in today s high horsepower outboards and stern drives. Designed to meet API GL-5 requirements. Superior lubricity protects gears from wear and reduces vibration and noise. USDA BioPreferred oil. 10600 1 quart (.946 l) with yorker cap for easy filling. 12 per carton. 10601 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. Pour Point -17 F (-27 C), Flash Point 468 F (242 C) Marine Power Trim & Tilt Fluid A biobased, biodegradable high performance power trim and tilt fluid formulated to provide superior lubricity to ensure proper pump performance, long seal life and quiet, smooth operation. Combats high operating pressures and resists rust, oxidation and foaming. Extreme pressure additives ensure excellent stability and shear resistance. 10603 10 fl. oz. squeeze tube (280 ml). 6 per case-cut carton. Pour Point -33 F (-36 C), Flash Point 406 F (208 C) 10600 10603 9

Gear Lube SAE 80w/90 Formulated for applications where heavy loads and high torque are present. Withstands severe shock and reduces vibration and noise. Specially blended to pick up moisture. Designed to meet API GL-5 requirements as well as auto and truck manufacturers specifications. USDA BioPreferred oil. 10400 1 quart (.946 l) with yorker cap for easy filling. 12 per carton. 10401 1 gallon (3.78 l) bottle. 4 per carton. 10402 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. Pour Point -17 F (-27 C), Flash Point 468 F (242 C) Gear Lube SAE 85w/140 Formulated for applications where heavy loads and high torque are present. Withstands severe shock and reduces vibration and noise. Specially blended to pick up moisture. Designed to meet API GL-5 requirements as well as auto and truck manufacturers specifications. USDA BioPreferred oil. 10405 1 quart (.946 l) with yorker cap for easy filling. 12 per carton. 10406 1 gallon (3.78 l) bottle. 4 per carton. 10407 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. Pour Point -4 F (-20 C), Flash Point 408 F (209 C) 10400 10405 Industrial Gear Lube ISO140 Specifically formulated to meet the demanding applications of gears and drives where heavy loads and high torque are present. Superior lubricity protects gears from wear. Reduces vibration and noise and protects all ferrous metals from rust and corrosion. Designed to handle both sliding and rolling parts. Suited for use where an API GL-5 performance level is specified. 10592 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10593 (not shown) 55 gallon (208.1) drum. 10401 Flash Point 594 F (312 C) Industrial Gear Lube ISO220 Specifically formulated to meet the demanding applications of gears and drives where heavy loads and high torque are present. Superior lubricity protects gears from wear. Reduces vibration and noise and protects all ferrous metals from rust and corrosion. Designed to handle both sliding and rolling parts. Suited for use where an API GL-5 performance level is specified. 10598 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10599 (not shown) 55 gallon (208.1) drum. Flash Point 376 F (191 C) Drilling & Tapping Fluid (For Home Use) UltraLube Drilling & Tapping Fluid s superior lubricity helps reduce the operating temperature of drill bits and taps. Keeping tips cool and lubricated will help extend tool life and tip sharpness. High flash point and lubricity reduce smoking compared to conventional petroleum-based lubricants. Drill and tap faster with less heat. Contains no chlorine. 10664 2 fl. oz. (59 ml) bottle, blister carded. 12 per case-cut carton. 10406 Flash Point 421 F (216 C) 10664 10

Oils (continued) H1 Food Grade Chain & Cable Lube Approved by the NSF and meets criteria established by the USDA H-1 and U.S. FDA regulation 21 CFR 178.3570 Lubricants With Incidental Food Contact. Excellent for lubrication of chains, cables and rollers, providing superior lubricity to protect moving parts. Less mist generation than petroleum-based products. Contains no chlorine. Safe for all metals. USDA BioPreferred SM oil. 10500 12 oz. (340 grams) aerosol. 12 per carton. 10500 10505 10573 10505 8 fl. oz. (224 ml) trigger spray. 12 per carton. 10506 1 gallon (3.78 l) refill. 4 per carton. Pour Point -4 F (-20 C), Flash Point 583 F (306 C) H1 Food Grade Hydraulic Oil ISO32/46 Approved by the NSF and meets criteria established by the USDA H-1 and U.S. FDA regulation 21 CFR 178.3570 Lubricants With Incidental Food Contact. Excellent for large or small cylinders, motors and hydraulic components. Specifically formulated to meet the demanding applications of major food and meat processing plants. Has superior flash and fire points for increased safety. Exceeds Oilgear Continuous Pump Durability Test and Oilgear Cycling Test. 10574 10506 10583 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. Pour Point 14 F (-10 C), Flash Point 493 F (256 C) Oilgear is a registered trademark of The Oilgear Company. Hydraulic Jack Oil ISO22 Recommended for industrial and home hydraulic jacks. Reduces wear through superior thin film protection. Protects all ferrous metal components from rust and corrosion. Superior performance for brass and bronze-on-steel contacts. Maintains stable viscosity through a wide operating temperature range. 10573 1 quart (.946 l) with yorker cap for easy filling. 12 per carton. 10574 1 gallon (3.78 l) bottle. 4 per carton. 10575 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. Pour Point 0 F (-18 C), Flash Point 322 F (161 C) 10557 Hydraulic Oil ISO32/46/68 Maintains stable viscosity through wide temperature ranges. Reduces wear through superior thin-film protection. Particularly suited for use near water, in forestry, agriculture, golf courses, etc. Part No. ISO Grade Viscosity Pour Point Flash Point 10557 32 214-33 F (-36 C) 406 F (208 C) 10560 46 223-13 F (-25 C) 493 F (256 C) 10563 68 196-11 F (-24 C) 500 F (260 C) Passes Vickers 20-VQ, 35-VQ and 104C Vane Pump Tests. Rust and corrosion protection to ASTM D-130 is 1A. Shipped in 5 gallon (18.9 l) plastic pails with pour spouts. 10560 11

Elevator Hydraulic Oil ISO46 UltraLube biobased, biodegradable Elevator Hydraulic Oil surpasses the lubricity of most conventional oils. It protects against wear and has a high flash point for increased safety. Specifically engineered for elevator hydraulic systems. Reduces wear through superior thin film protection and protects all ferrous metal components from rust and corrosion. Maintains stable viscosity through a wide operating temperature range. Recommended for systems having underground hydraulic lines where leaks are hard to find. Recommended for Green Building Council, LEEDS projects. 10800 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. Pour Point -27 F (-33 C), Flash Point 594 F (312 C). Hydraulic Oil ISO220 Maintains stable viscosity through wide temperature ranges. Reduces wear through superior thin-film protection. Particularly suited for use near water, in forestry, agriculture, golf courses, etc. 10594 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10595 (not shown) 55 gallon (208.1 l) drum. Passes Vickers 20-VQ, 35-VQ and 104C Vane Pump Tests. Rust and corrosion protection to ASTM D-130 is 1A. Pour Point -4 F (-20 C), Flash Point 529 F (276 C). Universal Hydraulic Tractor Fluid Designed for equipment using a shared hydraulic fluid reservoir operating clutches, brakes and lift systems. Protects against wear, brake chatter and clutch slippage. Superior lubricity protects pumps, valve cylinders and other hydraulic components. Prevents corrosion of non-ferrous metal parts. Meets or exceeds John Deere Wear/ Corrosion Test, Piston Pump AT 94661 and Flow Degradation tests, and Vickers 35-VQ Vane Pump Test. ASTM D-130 Copper Corrosion is 1A. USDA BioPreferred oil. 10571 5 gallon (18.9 l) plastic pail with pour spout. 10563 Viscosity Index 230, Pour Point -13 F (-25 C), Flash Point 426 F (219 C) Concrete/Asphalt Form Release Concrete/Asphalt Form Release is a water soluble, biodegradable, non-toxic, stain-free form release agent that permits easy removal of wood or steel forms. No unpleasant smell, toxic fumes or diesel odor. Less flammable than petroleum release agents. Meets federal and California VOC regulations. Applies easily with sprayer, brush or roller. Use 10% to 20% solution with water for concrete and 5% to 10% solution for asphalt. 10900 5 gallon (18.9 l) plastic pail with pour spout. 10901 (not shown) 55 gallon (208.1 l) drum. Viscosity 48, Flash Point 550 F (288 C) 10571 10900 12

4X Metal Working Oils 10650 UltraLube metal working oils biobased, biostable and biodegradable formulations surpass the lubricity and performance of conventional metal working oils. The superior lubricity maximizes feed rates, improves productivity, reduces chip welding and improves centricity, accuracy and part run-out. UltraLube metal working oils reduce heat, smoke and misting commonly found with petroleumbased fluids. Higher flash points mean improved safety as well. UltraLube metal working oils are chlorine free. Cutting Oil UltraLube Cutting Oil is a high performance cutting and way lube fluid. Improves surface finish in machining and grinding operations. Safe for all metals and is non-staining. Ideal for general purpose cutting, grinding, milling, tapping, reaming, gear cutting, broaching, gun drilling, screw machining and sharpening high speed steel and carbide cutting tools. 10650 1 gallon (3.78 l) bottle. 4 per carton. 10651 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10652 (not shown) 55 gallon (208.1 l) drum. Pour Point -4 F (-20 C), Flash Point 590 F (310 C) 10655 Low Viscosity (24cSt) Cutting Oil UltraLube Low Viscosity Cutting Oil is a light viscosity cutting oil. Improves surface finish in machining and grinding operations. Safe for all metals and is non-staining. Ideal for general purpose cutting, grinding, milling, tapping, reaming, gear cutting, broaching, gun drilling, screw machining and sharpening high speed steel and carbide cutting tools. 10655 1 gallon (3.78 l) bottle. 4 per carton. 10656 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10657 (not shown) 55 gallon (208.1 l) drum. Pour Point -8 F (-22 C), Flash Point 448 F (230 C) 10666 Threading & Tapping Oil UltraLube Threading & Tapping Oil is formulated with extreme pressure additives. UltraLube Threading & Tapping Oil is the ultimate product for threading iron, steel and ferrous alloys. Extends tool life and produces the smoothest, cleanest threads possible. Outstanding performance in pipe threading, both internal and external, using taps, dies or chasers. The ultimate product for mechanical contractors and sprinkler system installers threading pipe with Landis or Rigid style machines. Non-staining, high flash point formulation. Does not contain chlorine. Not intended for use on brass or copper. 10665 16 fl. oz. (448 ml) bottle with yorker cap for easy dispensing. 12 per carton. 10666 1 gallon (3.78 l) bottle. 4 per carton. 10667 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10668 (not shown) 55 gallon (208.1 l) drum. Pour Point -4 F (-20 C), Flash Point 421 F (216 C) 10665 13

Semi-Synthetic Metal Working Coolant UltraLube Metal Working Coolant is a water soluble metal working fluid concentrate. When mixed with water, UltraLube Coolant forms a stable emulsion that provides excellent cooling, outstanding lubricity and rust protection for use in a wide variety of grinding and machining applications. Oil-free formulation makes UltraLube Coolant a superior choice in medical, aerospace and other applications where chlorine and oil mists are a problem. Excellent performance in milling, tapping, reaming, gun drilling, broaching and shaping. Excellent for ferrous material (including high temperature alloys) and cast iron. Great on aluminum, including down the hole applications in die cast. Resists foaming, oxidation and rusting. Does not contain mineral oil. Vegetable oil base reduces dermatitis. Concentration Range: Grinding 30:1 to 20:1 (3% to 5%) Machining with carbide tools 20:1 to 17:1 (5% to 6%) Machining with high speed steel tools 20:1 to 14:1 (5% to 7%) Tapping 15:1 to 12:1 (6% to 8%) Minimum 33:1 (3%) Refractometer factor 1.8 Normal refractometer reading 4 Normal operating ph 9.3 10660 10660 1 gallon (3.78 l) bottle. 4 per carton. 10661 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10662 (not shown) 55 gallon (208.1 l) drum. MQL Cutting Oil UltraLube MQL (minimum quantity lubricant) Cutting Oil is specially formulated to achieve high production and low mists and smoke. Safe for all metals and is nonstaining. Ideal for general purpose cutting, grinding, milling, tapping, reaming, gear cutting, broaching, gun drilling and screw machining. 10670 1 gallon (3.78 l) bottle. 4 per carton. 10671 (not shown) 5 gallon (18.9 l) plastic pail with pour spout. 10672 (not shown) 55 gallon (208.1 l) drum. 10670 Pour Point -4 F (-20 C), Flash Point 590 F (310 C) Visit us online at UltraLube.com UltraLube professional-grade lubricants are available at retail stores across North America. Our products are also available for wholesale purchase for business purposes through national and local industrial suppliers and automotive distributors. Visit UltraLube.com to find out where to buy. 14

Plews & Edelmann 1550 Franklin Grove Road, Dixon, IL 61021 USA Telephone: 800-770-4639, Fax: 815-288-3388 www.ultralube.com www.facebook.com/ultralube 2012 Plews & Edelmann Printed in USA Industrial Agriculture Auto/Truck Household Outdoor 2