Series Overview Select a code character for each numbered position to configure the product. 1 Code Product Type Specifications Pump 2 Product Series Max System Pressure (MAWP) Ports See 1/4-18 (F) NPT Side Ports 3 Modifier - Standard Design 4 (Width/Nºs/Pitch) Displacement Max Differential Pressure n Magnet (Standard) 23.85/2/16 3.15 ml/rev (.83 gal/1*rev) 4.2 Bar (6 psi) Ferrite 5 Material Max Differential Pressure Temp Range F PTFE 3.5 Bar (5 psi) -46/54 C (-5/13 F) 6 Static Seals Temp Range F PTFE -46/232 C (-5/45 F) V Viton -29/24 C (-2/4 F) 7 Base S SS316 8 Max System Pressure (MAWP) Weight (Pumphead) E NEMA 56C 13 Bar (15 psi) 2.3 kg (5.1 lbs) 6 IEC 71-B14 13 Bar (15 psi) 2.3 kg (5.1 lbs) Notes N3 Add Option codes after the to modify features or enhance the product. Driving Magnet (PC13) NdFeB Driving (Ring) Notes Page 1 of 1 Form F312 Rev B PRICES ARE FOB/EX-WORS FACTORY - Prices shown are the Manufacturer's Suggested List Price and are subject to change without notice. USA: Micropump, Inc., A Unit of IDEX Corporation Phone 36.253.28 Fax 36.253.241 info.micropump@idexcorp.com S.2MPV 1999-25 Micropump, Inc., Trademarks belong to their respective owners. Effective: 1-Sep-5
- 23 Performance -23 3.5 3. 2.5 2. 1.5 14 12 1 8 6 Water @ 1 CP Torque 5-345 RPM 4 RPM 345 RPM 35 3 25 2 15 45 4 35 3 25 2 1..5. [PM] Flow 4 2 [L/mn] 86 RPM 5 RPM 285 RPM 24 RPM 115 RPM 145 RPM 175 RPM 1 2 3 4 5 [bar] Differential Pressure 1 5 [mnm] Torque [oz-in] 15 1 5 1 2 3 4 5 6 7 [psi] USA: Micropump, Inc., A Unit of IDEX Corporation Phone 36.253.28 Fax 36.253.241 2-25 Micropump, Inc., Trademarks belong to their respective ow 1 Rev A Page 1 Printed 6-Oct-5
- 23 Performance-High Viscosity -23 3. 2.5 12 1 Oil @ 1 CP 5 Torque 5-345 RPM ----Requires Rare Earth Magnet(s) 345 RPM 4 7 6 2. 1.5 8 6 285 RPM 24 RPM 175 RPM 3 2 5 4 3 1..5 4 2 145 RPM 115 RPM 86 RPM 5 RPM 1 2 1. [PM] Flow [L/mn] 1 2 3 4 5 [bar] Differential Pressure [mnm] Torque [oz-in] 1 2 3 4 5 6 7 [psi] Watts=Torque [mnm] x Speed [RPM] 9555 HP=Torque [oz-in] x Speed [RPM] 1.8 x 1^6 To calculate torque, multiply correction factor by torque from viscosity curve above. Torque Correction Factors: For Higher Viscosity Liquids Magnet Decouple Torque Viscosity [cp] 1 1 15 n Driving Torque Torque Max Speed [RPM] 345 345 86 Magnet Hub [mnm] [oz.in] [Bar] [psi] Ferrite Ferrite 417 59.3 5.5 1 1.6 1.4 2.6 1 1.5 2.8 4.7 1 1.4 4.1 6.7 1 1.3 USA: Micropump, Inc., A Unit of IDEX Corporation Phone 36.253.28 Fax 36.253.241 1 Rev A Page 2 2-25 Micropump, Inc., Trademarks belong to their respective ow Printed 6-Oct-5
- 23 Specifications SI Displacement 3.15 ml/rev.83 gal/1*rev Max Flow (4 Pole Speed) 4.6 L/mn 145 RPM (5Hz) 1.5 gal/mn 175 RPM (6Hz) Max Flow (2 Pole Speed) 9. L/mn 285 RPM (5Hz) 2.9 gal/mn 345 RPM (6Hz) Max Differential Pressure 4.2 Bar 6 psi 1 Max System Pressure (MAWP) See See NIPR (Absolute) 18 mbar 2.5 psia Wet Lift (Typical) 51 cm.h2o (145 RPM) 24 in.h2o (175 RPM) 2 Temp Range See Material See Material 3 Viscosity Range.2 to 15 cp.2 to 15 cp 4 Max Speed 4, RPM 4, RPM Rotation (Facing Motor Shaft) CW CW Weight (Pumphead) 1.7 kg 3.7 lbs Dimensions (LxWxH) See Drawing See Drawing Ports 1/4-18 (F) NPT Side Ports 1/4-18 (F) NPT Side Ports n Magnet (Standard) Ferrite Ferrite Optional Internal Bypass No No US Notes 1 See Product. Max pressure depends on gear material. 2 Priming ability varies with operating conditions. 3 See Product for specific temp limits. 4 See Performance-High Viscosity for viscosity limits. USA: Micropump, Inc., A Unit of IDEX Corporation Phone 36.253.28 Fax 36.253.241 1 Rev A Page 3 2-25 Micropump, Inc., Trademarks belong to their respective ow Printed 6-Oct-5
1 2-23 4/6 3 4 5 6 7 8 Dimensions USA: Micropump, Inc., A Unit of IDEX Corporation Phone 36.253.28 Fax 36.253.241 14 Rev A Dimensions 1 2-25 Micropump, Inc., Trademarks belong to their respective ow Printed 6-Oct-5
- 23 E Dimensions USA: Micropump, Inc., A Unit of IDEX Corporation Phone 36.253.28 Fax 36.253.241 12 Rev A Dimensions 1 2-25 Micropump, Inc., Trademarks belong to their respective ow Printed 6-Oct-5