38 Order NLINE www.midwestwheel.com Midwest Wheel is Your Source for... CATALOG NUMBER TRUCK & TRAILER SUSPENSION PARTS TRUCK MIDWESTWHEEL.COM IOWA HAULMAAX DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 TRUCK PARTS SUPER STORE TM CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 SIOUX CITY 1819 E. 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 VANTRAAX HAULMAAX / HN SERIES RT & RTE RS HAS / MAX AIR PRIMAAX AIRTEK TRAILER INTRAAX VANTRAAX HT SERIES August 2017 (38Hendrickson Truck and Trailer Suspension) MISSOURI KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402
TRUCK SUSPENSION PROGRAM HAULMAAX / HN SERIES APPLICATION: VOCATIONAL Torque Rod Torque Rod Bushing Auxiliary Spring Progressive Spring Tie Bar Transverse Rod Auxiliary/ Progressive Spring & Shims Bolster Spring Wear Plate Saddle Assembly Rebound Strap HAULMAAX Bolster Spring Kit 2 Haulmaax P/N HTK64179-048 Complete Bolster Spring Kit Haulmaax P/N HTK60961-712 Parts & Kits for Haulmaax & HN Series Suspensions End Bushing Equalizing Beam Bolster Spring HN Series P/N HTK60879-000L HN SERIES Qty. per suspension Bolster Springs Haulmaax Tie-Bar Bolster Spring Kit (Includes 2 springs & 1 wear plate) HTK64179-048 2 Complete Haulmaax Tie-Bar Bolster Spring Kit (Includes 2 springs, 1 wear plate & HTK60961-712 2 1 Auxiliary Spring) HN Series Bolster Spring (2 springs) HTK60879-000L 2 Auxiliary/Progressive Springs Progressive Load Spring Service Kit (One Side) HTK60961-745 2 Auxiliary Load Spring Service Kit (One Side) HTK64179-004 2 Bar Pin End Bushing Kit Shim Type (1 wheel end) HTK34013-088L 4 Rotating (1 wheel end) HTK34013-188L 4 Equalizing Beam Rotatable bar pin end bushing (HTK34013-188L) for quick & easy install HMX460 54" Beam Assy w/ Shock Bracket HTK080225-001 2 HMX460 54" Beam Assy w/o Shock Bracket HTK080226-001 2 HN462 54" Beam Assy HTK080227-002 2 HN402 52" Beam Assy HTK080228-008 2 Saddle Assembly HMX400 HTK64642-000 2 HMX460 HTK64643-000 2 Shock Absorbers (Not Pictured) 16.5" Haulmaax HTK60680-005 4 17.5"/18.5" Haulmaax HTK60680-006 4 HN Series Shock HTK60680-003 4 Torque Rods 2 Piece Torque Rod Kit HTK60218-000 2 Taper Bushing HTK64697-000H 2 Parts Rebound Strap HTK57878-003 2 Wear Plate HTK64890-000 4
RT & RTE APPLICATION: VOCATIONAL Spring Eye Bushing Spring Hanger Torque Rod Bushing Spring Assembly Torque Rod Saddle Assembly End Bushing Center Bushing Equalizing Beam Parts & Kits for RT & RTE Suspensions Cross-tube Qty. per suspension Rubber End Bushing & Adapter Service Kits 440 Kit (1 Wheel End) HTK34013-049L 4 520 Kit (1 Wheel End) HTK34013-050L 4 340 Kit (1 Wheel End) HTK34013-048L 4 Bar Pin End Bushing Service Kit Non shim (1 Wheel End) HTK34013-087L 4 Shim Type (1 Wheel End) HTK34013-088L 4 Rotating (1 Wheel End) HTK34013-188L 4 Center Bushings R340 Rubber HTK06664-000L 2 R340 Rubber w/ Loose End Plug HTK22279-000L 2 R380 Rubber HTK05919-000L 2 R380 Rubber w/ Loose End Plug HTK22282-000L 2 R400 Rubber HTK49400-000L 2 R400 Rubber w/ Loose End Plug HTK49600-000L 2 R520 Bronze Service Kit (2 Beams) HTK30437-000L 2 R520 Rubber HTK29483-005L 2 Cross Tube R480 44.88" HTK44643-009L 1 R340 44.88" HTK44642-008L 1 Spring Assembly RT400 AUT50-267 2 RT400/403 AUT50-291OE 2 RT440 AUT50-215 2 RT480 AUT50-301OE 2 RTE400 AUT50-275 2 RTE480 AUT50-299 2 Torque Rods Tube End, Female, 5/8" Bushing & Hole Dia. HTK66610-000H 2 Spacer End, Male, 27" Straddle, 5/8" Bushing & Hole Dia. HTK66661-000H 2 Spacer End, Male, 27" Straddle, 3X1 1/4" Taper HTK66681-000H 2 Spacer End, Male, 27" Straddle, 2 X 1 1/8" Taper HTK66671-000H 2 Torque Rod Bushings (2.5" Wide) HTK44694-000L 2 (2.75" Wide) HTK44695-000L 2 (3" Taper) HTK44697-000L 2 3
RS APPLICATION: VOCATIONAL Parts & Kits for RS Suspensions End Bushing 440 Kit (1 Wheel End) HTK34013-049L 4 & Adapter 520 Kit (1 Wheel End) HTK34013-050L 4 Kits 340 Kit (1 Wheel End) HTK34013-048L 4 Bar Pin End Bushing Kits Non Shim (1 Wheel End) HTK34013-087L 4 Shim Type (1 Wheel End) HTK34013-088L 4 Rotating (1 Wheel End) HTK34013-188L 4 Center R340 Rubber HTK06664-000L 2 Bushings R340 Rubber w/ Loose HTK22279-000L 2 End Plug R380 Rubber HTK05919-000L 2 R380 Rubber w/ Loose HTK22282-000L 2 End Plug R400 Rubber HTK49400-000L 2 R400 Rubber w/ Loose HTK49600-000L 2 End Plug R520 Bronze Service Kit HTK30437-000L 1 (2 Beams) R520 Rubber HTK29483-005L 2 Cross Tube R480 44.88" HTK44643-009L 1 R340 44.88" HTK44642-008L 1 Load RS-400 - On & Off Hwy HTK48973-000 4 Cushions RS-460 Thru 520 - On & HTK26953-000 4 Off Hwy RS-460 Thru 520 Heavy Duty HTK24209-000 4 Torque Rod Frame Hanger Load Cushions Saddle Assembly Center Bushing Description P/N Qty Torque Tube End, Female, 5/8" Bushing & Hole Dia. HTK66610-000H 2 Rods Spacer End, Male, 27" Straddle, 5/8" Bushing & Hole Dia. HTK66661-000H 2 Spacer End, Male, 27" Straddle, 3X1 1/4" Taper HTK66681-000H 2 Spacer End, Male, 27" Straddle, 2 X 1 1/8" Taper HTK66671-000H 2 Torque Rod Bushings Equalizing Beam Torque Rod Bushing Cross-tube End Bushing Vertical Drive Bushing (2.5" Wide) HTK44694-000L 2 (2.75" Wide) HTK44695-000L 2 (3" Taper) HTK44697-000L 2 Qty. per suspension 4 PRIMAAX APPLICATION: VOCATIONAL Parts & Kits for PRIMAAX Suspensions Description P/N Qty Air Spring PAX 460: 8.5-10 HTK60271-002L 2 Ride Height Shock PAX 460, 8.5"-10" MO 65504 2 Absorber Ride Height Height w/ Dump - PAX 460, HTK57977-000 1 Control Valves 12 1/2", 14 3/8", 15 1/2" Ride Heights Universal w/ Dump HTK59013-000 1 (Valve Only) Universal (No Dump, Valve Only) TN VS-227 1 Pivot Bushing & Quik-Align U-Bolts Torque Rod & Bushing Frame Hanger Transverse Rod & Bushing Support Beam Height Control Valve D-Pin Bushing Shock Absorber D-Pin Service Parts Bushing - PAX 460, 8.5-10", 12 1/2", 14 3/8", 15 1/2" Ride Height Air Spring HTK60383-000 4 Bushing, PAX 520, 10" Ride Height HTK65381-000 4 Single Service Kit For PAX 520, 10" Ride Height HTK34013-114 4 Quik Align Bushings PAX 460: 8.5"-10", 12 1/2, 14 3/8", 15 1/2" Ride Height, PAX 520 10" Ride Height HTK58648-000 2 Pivot Bushings, PAX 520, 10" Ride Height (1 Axle Only) HTK60632-008 2 Air Spring Cross Brace Qty. per suspension
HAS / MAX AIR APPLICATION: VOCATIONAL 46K+, ON HIGHWAY 40K Torque Rod Bushing Main Support Member Z Bar Transverse Torque Rod Height Control Valve Spring Hanger Slipper Pad Parts & Kits for HAS & MAX AIR Suspensions Torque Rod Spring Seat Torque Rod HTK47691-000L 4 Bushing Air Spring Assy HA (All Except Ford Or Mack) GZ 1R12-365 2 HA (Ford) GZ 1R12-424 2 HA (Mack) GZ 1R12-365 2 HAS - 400/402/460/190/210/230 GZ 1R12-403 2 HAS - Low Ride Height Model GZ 1R12-620 2 (400L/402L/150L/190L/210L/230L) Air Spring Max Air AL 405 HTK58786-002 2 Height Control Assy -HAS (Mack Max Air) HTK59899-000 1 Valves Assy w/ Dump - HAS HTK57977-000 1 Assy (No Dump) - HA, HAS HTK60826-000 1 Universal w/ Dump (Valve Only) HTK59013-000 1 Universal (No Dump, Valve Only) TN VS-227 1 U-Bolts Shock Absorber HAS - Standard MO 65484 2 HAS - Volvo (Single & Tandem) HTK60675-001 2 HAS - High Torque HTK60675-003 2 Max Air Shock HTK57241-006 2 Main Support Member - Z Bar Air Spring Shock Absorber HA HTK56871-001 2 HAS (46K) HTK56946-000 2 HAS (40K) HTK56943-000 2 Max Air (Left) HTK58691-000 2 Max Air (Right) HTK58768-000 2 Qty. per suspension AIRTEK APPLICATION: FRONT STEER, ON HIGHWAY ONLY Air Spring Shock Absorber Parts & Kits for AIRTEK Suspensions Kingpin Bushing & Axle Set, All Makes HTK60961-040 2 Bearing Service Kit Air Springs Freightliner HTK69782-002L 2 Volvo - 13.2K/14.6K HTK60716-002L 2 Volvo - 12.5K HTK66349-002L 2 International HTK65790-002L 2 Height Control Valves Freightliner (RH) HTK59935-002 1 International (LH) HTK59935-011 1 Volvo (Single, RH) HTK59935-009 1 Shock Absorber Freightliner HTK58913-003L 2 Volvo HTK64838-003L 2 International (Day Cab) HTK65992-002L 2 International (Sleeper) HTK65992-001L 2 Leaf Spring Century Class S/T Columbia 1350, Western Star (Set Back) Replaces 59930-001 HTK59930-021 2 STEERTEK Axle Qty. per suspension Height Control Valve King Pin Convolute Leaf Spring Unitized hub and ABS ready Two-Piece Knuckle 5
TRAILER SUSPENSION PROGRAM INTRAAX ECCENTRIC ALIGNMENT COLLAR FRAME BRACKETS BUSHING TUBE SPACER CONCENTRIC ALIGNMENT COLLAR FRAME BRACKET WITH UPPER SHOCK MOUNT SHOCK ABSORBER AIR SPRING MOUNT KIT AIR SPRING PIVOT CONNECTION HTRAAX (AXLE/BEAM WELDMENT) 6 S-CAM Universal Intraax Parts CAM TUBE KIT Description P/N OE Ref. Per Axle ALIGNMENT COLLARS Eccentric alignment collar (outer), Pivot hole is offset from the center of collar TN S-20925 2 Concentric alignment collar (inner), Pivot hole is in center of collar TN S-20924 2 AIR SPRING MOUNTING KIT 13.5", 14", 18" and 19" RH TN S-22619/2 2 15" RH TN S-22630/2 2 16" RH TN S-22631/2 2 17" RH TN S-22632/2 2 AIR SPRING SPACER Plastic, 11/8" Thick spacer, 15" RH TN S-22510-1 2 Plastic, 17/8" Thick spacer, 16" RH TN S-22510-2 2 Plastic, 31/8" Thick spacer, 17" RH TN S-22510-3 2 S-CAM Left, for 16.5" Brakes EU E-11866 S-24636-1L 1 Right, for 16.5" Brakes EU E-11867 S-24636-1R 1 CAM TUBE KIT For 16.5" Brakes - includes cam tube, support brackets, screws, nuts, TN S-28890 2 washers, rings. For models shipped after April 2001 HEIGHT CONTROL VALVE No Dump TN VS-227 1 Integral Dump TN VS-228 1 BOLTED LINKAGE ASSEMBLY TN S-14187 1 AXLE / BEAM WELDMENT Call for more information TN HTRAAX.XXXX - FRAME BRACKET Call for more information Various - AAT 23K, 25K, 30K Top Mount Replacement Parts (Wide Bushing) Description P/N OE Ref. Per Axle QUIK-ALIGN PIVOT BOLT KIT Includes 10" shear-type bolt, nut and washers TN S-24679 2 QUIK-ALIGN PIVOT BUSHING KIT Standard, Includes bushing, pivot bolt kit, bushing tube spacers & lube TN S-24691 2 BUSHING TOOL Required to correctly rebush the suspension. TN S-21307 - BUSHING TUBE SPACERS (4) required per axle TN S-21099 4 AIR SPRING AAT 23K 13.5" to 19" RH GZ 1R13-159 S-21800 2 AAT 23K 12" to 13" RH TN S-26773 2 AAT 25K 13.5" to 19" RH GZ 1R14-171 S-21784 2 All AAT 30K Models GZ 1R14-172 S-27341 2 SHOCK ABSORBER AAT 23K and 25K models, standard or limited rebound MO 65419 S-23566, S-23361 2 All AAT 30K models MO 65416 S-24023 2
INTRAAX, continued AANT 23K Top Mount Replacement Parts (Narrow Bushing) AIR SPRING Standard Pressure 12" to 13" RH TN S-26773 2 Standard Pressure 13.5" to 19" RH GZ 1R13-159 S-21800 2 Low Pressure 13.5" to 19" RH GZ 1R14-171 S-21784 2 QUIK-ALIGN PIVOT BOLT KIT Includes 7" shear-type bolt, nut and washers TN S-24705 2 BUSHING TUBE SPACERS TN S-26807 4 TRI-FUNCTIONAL BUSHING KIT Includes (2) bushings, pivot bolt kit, bushing tube spacers & lube TN S-26321 1 BUSHING TOOL Required to correctly rebush the suspension. TN S-24736 - SHOCK ABSORBER 13.5" to 19" RH MO 65419 S-23566 2 13.5" to 17.5" high control models, 13.5" to 19" limited rebound MO 65419 S-23361 2 13" RH; Standard travel, high control models MO 65511 S-23651 2 13.5" to 19" RH; Extended service with high damping MO 65416 S-24023 2 12" RH; Extended service with high damping MO 65512 S-23743 2 13" RH, Extended service with high damping, high control models MO 65465 S-24579 2 VANTRAAX SEE INTRAAX FOR SUSPENSION REPLACEMENT PARTS OPPORTUNITIES BODY RAIL CLIP BODY RAIL QUIK-DRAW SLIDER BOX ASSEMBLY (AMBOX) Universal Slider Box Parts AFTERMARKET SLIDER BOX REPLACEMENT Call for more information TN AMBOX.### 1 QUIK-DRAW PNEUMATIC PIN-PULL MECHANISM Front Linear Actuator w/ Fittings, 48" & 54" box, Order Pin Extension for 54" box TN S-28061-2 1 Reag Linear Actuator w/ Fittings, 48 & 54 box, Order Pin Extension for 54 box TN S-28062-2 1 QUIK-DRAW VALVE Three-way Auto Reset Valve TN VS-25223 1 Three-way Auto Reset Valve Assembly with Fittings TN VS-25224 1 QUIK-DRAW VALVE KNOB with SET SCREW TN VS-25849 1 HANDLE ASSEMBLY Handle and grip assembly TN S-25592 1 BODY RAIL CLIP 3.8" clip height, Use with 6" hole centers and 1.375" locking pin TN S-24460 4 3.4" clip height, Use with 4" hole centers and 1.625" (1-5/8") locking pin TN S-24459 4 SLIDER WEAR PAD KIT Includes (1) slider wear pad and (8) screws TN S-14342-3 2 7
VANTRAAX, continued Universal Vantraax Parts Description P/N OE Ref. Per Axle ALIGNMENT COLLARS Eccentric alignment collar (outer), Pivot hole is offset from the center of collar TN S-20925 2 Concentric alignment collar (inner), Pivot hole is in center of collar TN S-20924 2 S-CAM Left, for 16.5" Brakes EU E-11866 S-24636-1L 1 Right, for 16.5" Brakes EU E-11867 S-24636-1R 1 CAM TUBE KIT For 16.5" Brakes - includes cam tube, support brackets, screws, nuts, TN S-28890 2 washers, rings. For models shipped after April 2001 HEIGHT CONTROL VALVE No Dump TN VS-227 1 Integral Dump TN VS-228 1 BOLTED LINKAGE ASSEMBLY TN S-14187 1 HKANT 40K / HKA180 Replacement Parts (Narrow Bushing) AIR SPRING 16" RH and above (Shipped prior to January 2008) GZ 1R13-176 S-22948 4 16" RH and above GZ 1R13-177 S-21966 4 (Shipped after January 2008) TN S-28929 4 AIR SPRING MOUNTING KIT (per air spring) WITH 2" WELD-ON AIR SPRING PEDESTAL AIR SPRING MOUNTING KIT (per air spring) WITH CAST AIR SPRING PEDESTAL AIR SPRING SPACER WITH 2" WELD-ON AIR SPRING PEDESTAL 15" and 19" RH TN S-22631/2 4 15.5" RH TN S-22632/2 4 16", 16.5" and 17" RH TN S-22619/2 4 14"-18" RH TN S-22619/2 4 19" RH TN S-22630/2 4 14" and 16.5" RH, 3/4" thick spacer TN S-22510-4 4 15.5" RH, Requires both the 3/4" and 1-7/8" spacer TN S-22510-4 / TN S-22510-2 4 / 4 15" and 18" RH, 1-7/8" thick spacer TN S-22510-2 4 17" RH, 1-1/8" thick spacer TN S-22510-1 4 19" RH, 3-1/8" thick spacer TN S-22510-3 4 19" RH, 1-1/8" thick spacer TN S-22510-1 4 AIR SPRING SPACER WITH CAST AIR SPRING PEDESTAL SHOCK ABSORBER MO 65419 S-24088 4 TRI-FUNCTIONAL PIVOT BUSHING KIT Includes (2) bushings, (2) pivot bolt kits, (4) bushing TN S-26321 2 tube spacers and lubricant pack BUSHING TOOL Required to correctly rebush the suspension. TN S-24736 - QUIK-ALIGN PIVOT BOLT KIT Contains 7" bolt, nut and hardened washers TN S-24705 4 HKANT 46K Replacement Parts (Narrow Bushing / Tapered Beam Model) 8 AIR SPRING 16" RH and above GZ 1R13-176 S-22948 4 16" RH and above GZ 1R13-177 S-21966 4 Below 16" RH GZ 1R13-159 S-21800 4 AIR SPRING MOUNTING KIT (per air 14"-18" RH TN S-22619/2 4 spring) WITH CAST AIR SPRING PEDESTAL 19" RH TN S-22630/2 4 AIR SPRING SPACER 1-1/8" thick spacer, 19" RH TN S-22510-1 4 SHOCK ABSORBER Standard Duty MO 65419 S-23566 4 TRI-FUNCTIONAL PIVOT BUSHING KIT* Includes (2) bushings, (2) pivot bolt kits, (4) bushing tube spacers TN S-26321 2 and lubricant pack BUSHING TOOL Required to correctly rebush the suspension. TN S-24736 - QUIK-ALIGN PIVOT BOLT KIT Contains 7" bolt, nut and hardened washers TN S-24705 4 BUSHING TUBE SPACER TN S-26807 8
VANTRAAX, continued HKAT 46K / HKA200 Replacement Parts (Wide Bushing / Straight Beam Model) AIR SPRING 16" - 19" RH GZ 1R13-176 S-22948 4 16" RH and above GZ 1R13-177 S-21966 4 14" - 15" RH GZ 1R13-159 S-21800 4 AIR SPRING MOUNTING KIT (per air spring) - When model includes a 2", weld-on pedestal under the air spring. AIR SPRING SPACER - When model includes a 2", weld-on pedestal under the air spring. 16" RH TN S-22619/2 4 15" and 18" RH TN S-22631/2 4 17" RH TN S-22630/2 4 19" RH TN S-22632/2 4 14" and 16.5" RH, 3/4" spacer TN S-22510-4 4 15" and 18" RH, 1-7/8" spacer TN S-22510-2 4 17" RH, 1-1/8" spacer TN S-22510-1 4 19" RH, 3-1/8" spacer TN S-22510-3 4 SHOCK ABSORBER MO 65419 S-23566 4 TRI-FUNCTIONAL PIVOT BUSHING KIT Wide Bushing, Includes (1) bushings, (1) pivot bolt kits, (2) bushing TN S-24691 2 tube spacers and lubricant pack BUSHING TOOL Required to correctly rebush the suspension. TN S-21307 - QUIK-ALIGN PIVOT BOLT KIT Contains 10" bolt, nut and hardened washers TN S-24679 4 BUSHING TUBE SPACER TN S-21099 8 HKAT 50K / HKA250 Replacement Parts (Wide Bushing) AIR SPRING 14"-15" RH GZ 1R14-171 S-21784 4 16"-19" RH FI W013588092 S-24443 4 AIR SPRING MOUNTING KIT (per air spring) - When model includes a 2", weld-on pedestal under the air spring. AIR SPRING SPACER - When model includes a 2", weld-on pedestal under the air spring. 16" RH TN S-22619/2 4 15" and 18" RH TN S-22631/2 4 17" RH TN S-22630/2 4 19" RH TN S-22632/2 4 14" and 16.5" RH, 3/4" spacer TN S-22510-4 4 15" and 18" RH, 1-7/8" spacer TN S-22510-2 4 17" RH, 1-1/8" spacer TN S-22510-1 4 19" RH, 3-1/8" spacer TN S-22510-3 4 SHOCK ABSORBER MO 65416 S-24023 4 TRI-FUNCTIONAL PIVOT BUSHING KIT Wide bushing, Includes (1) bushing, (1) pivot bolt kit, (2) bushing tube TN S-24691 4 spacers and lubricant pack BUSHING TOOL Required to correctly rebush the suspension. TN S-21307 - QUIK-ALIGN PIVOT BOLT KIT Contains 10" bolt, nut and hardened washers (alignment collars not included) TN S-24679 4 BUSHING TUBE SPACER TN S-21099 8 BODY RAIL CLIP BODY RAIL QUIK-DRAW SLIDER BOX ASSEMBLY (AMBOX) 9
HT SERIES HT Universal Air Accessories UNIVERSAL HEIGHT CONTROL Fits all models. Includes height control valve, exhaust line fittings and spacer bracket, No dump TN VS-227 1** VALVE Integral dump TN VS-228 1** UNIVERSAL LINKAGE ASSEMBLY Includes linkage assembly and hardware TN S-14187 1** DUMP VALVE Includes dump valve and fittings TN VS-23460 1** PRESSURE PROTECTION VALVE Includes valve only TN VS-1128 1** ** Quantities for air control components are per trailer. HT Universal on all HT230T, HT250T, HT250U, HT300T, HT300U (Wide Bushing) ALIGNMENT COLLARS Welded Alignment, Collars are welded to frame bracket TN S-2770 4 Eccentric, QUIK-ALIGN (outer), Alignment hole is off center TN S-20925 2 Concentric, QUIK-ALIGN (inner), Alignment hole is centered TN S-20924 2 TRI-FUNCTIONAL II Welded Alignment, Includes bushing, bushing tube spacers,cap screw, prevailing torque TN S-6914 2 BUSHING KIT hex nut, liner and lube QUIK-ALIGN, Includes bushing, bushing tube spacers, round head bolt, prevailing torque TN S-24691 2 hex nut, hardened washers and lube BUSHING TOOL Required to correctly rebush the suspension. TN S-21307 - BUSHING TUBE SPACER All models TN S-21099 4 PIVOT BOLT KIT Welded Alignment, Includes cap screw, prevailing torque hex nut and liner TN S-3646 2 QUIK-ALIGN, Includes round head bolt, hardened washers and prevailing torque hex nut TN S-24679 2 BEAM ASSEMBLY Call for more information TN HTRAAX.XXXX - FRAME BRACKET Call for more information Various - FRAME BRACKET BUSHING TUBE SPACER SHOCK ABSORBER AIR SPRING SHOCK MOUNT HT230T PIVOT BOLT KIT AIR SPRING ALIGNMENT COLLAR BEAM ASSEMBLY 10 HT230T TOP-MOUNT Replacement Parts (Wide Bushing) SHOCK All models except below MO 65416 S-20002 S-21553 2 ABSORBER -14-017, -15-017, -15-517, -17-517, TA15-517, TA15-520, TA17-517 MO 65501 S-20126 2-14-007, -14-011, -15-007, -15-011, -15-012, -15-028, TA14-007, MO 66886 S-2160 2 TA15-007, TA16-007, TA17-007, TB14-033, TB15-028 -14-020, -14-021, TA14-021 MO 66636 S-2212 2 TA14-020 MO 65419 / MO 66608 B-22345 2 TA15-522, TA17-522 MO 65493 S-21699 2 AIR SPRING All models GZ 1R13-119 S-20010 / S-21208 2
HT SERIES, continued FRAME BRACKET SHOCK ABSORBER HT250T AIR SPRING PIVOT BOLT KIT ALIGNMENT COLLAR BEAM ASSEMBLY HT250T Top Mount Replacement Parts (Wide Bushing) SHOCK ABSORBER All models MO 66636 S-2212 2 AIR SPRING Fits all models unless shown below GZ 1R12-375 S-20124 2 Fits T-17-022, TB15-025 GZ 1R13-118 S-20127 2 HT250U Underslung Replacement Parts (Wide Bushing) SHOCK ABSORBER Fits all models unless shown below MO 65416 S-20002 / S-21553 2 Fits U-7.5-021, U-7.5-022 MO 66893 S-1667 2 Fits U-9-020, U-9-021, U-9-023, U-9.2-026, U-15-022, UB9-022, UB15-022 MO 66636 / MO 65519 S-2212 2 Fits U-6.5-517, U-7.5-017, U-7.5-517, U-9-517, U-12-517, U-14-517, MO 65501 S-20126 2 UB6.5-517,UB7.5-517 Fits U-6.5-030, U-6.5-031 MO 66886 S-2160 2 SHOCK STRAP KITS Use with 65416 and 66893 TN S-14587-1 1 AIR SPRING All models except below GZ 1R12-375 S-20124 2 Fits U-6.5-011, U-6.5-023 GZ 1R12-375 S-20413 2 Fits U-9-006, U-9-028, U-9-029, U-12-006, U-14-006, U-14-028 GZ 1R13-118 S-20127 2 Fits U-9-010, UB9-010 GZ 1R13-118 S-20414 2 Fits U-6.5-002, U-6.5-003, U-6.5-031 GZ 1R12-366 S-20716 2 Fits U-9-020, U-9-021, U-9-023, U-9.2-026, U-15-022, UB9-022, UB15-022 GZ 1R14-127 S-13122 2 Fits U-7.5-021, U-7.5-022 GZ 1R12-256 S-14249 2 NOTE: Identification tag can be found on the front of the roadside frame bracket or the inside of the curbside beam. HT300T TOP MOUNT Replacement Parts (Wide Bushing) SHOCK ABSORBER All models except below MO 65416 S-20126 2-15-007, -15-011, -15-021, -17-007, -17-011, -17-012, TB19-007, TB19-020 MO 66886 S-2160 2-15-017, -15-518, -17-518, -17-520 MO 65416 S-21553 2 TB15-027 MO 65465 S-24579 2 AIR SPRING All models GZ 1R14-039 S-4771 2 11
HT SERIES, continued HT300U UNDERSLUNG Replacement Parts (Wide Bushing) SHOCK U-7.5-001, U-7.5-501, U-9-001, U-9-005, U-9-020, U-9-021, U-9-022, U-9-024, U-9-501, U-9-701, MO 65416 S-20126 2 ABSORBER U-12-001, U-12-005, U-12-020, U-12-024, U-14-001, U-14-005, U-14-020, U-14-021, U-14-022, U-14-023, U-14-701, U-15-011, U-17-001, U-17-020, U-17-021, U-17-024, UB9-022, UB14-022 U-7.5-519, U-9-011, U-9-519, U-12-011, U-12-015, U-14-011, U-14-015,U-17-011 MO 65493 S-21699 2 AIR SPRING U-7.5-001, U-7.5-501, U-7.5-519, U-9-001, U-9-005, U-9-011, U-9-020, U-9-021, U-9-024, U-9-501, GZ 1R13-038 S-3830 2 U-9-519, U-9-701, U-12-001, U-12-005, U-12-020, U-12-024, U-14-001, U-14-005, U-14-020, U-14-021, U-14-022, U-14-023, U-14-701, U-17-001, U-17-020, U-17-021 U-9-022, U-15-011, U-17-011, UB9-022 TN S-22173 2 AIR SPRING MOUNT SHOCK ABSORBER FRAME BRACKET WITH UPPER SHOCK MOUNT HT250US LOWER SHOCK MOUNT AIR SPRING PIVOT BOLT KIT HT250US UNDERSLUNG Replacement Parts (Narrow Bushing) BEAM ASSEMBLY TRI-FUNCTIONAL II QUIK-ALIGN, Includes bushing, bushing tube spacers, round head bolt, prevailing TN S-24691 2 BUSHING KIT torque hex nut, hardened washers and lube BUSHING TOOL Required to correctly rebush the suspension TN S-21307 - BUSHING TUBE SPACER All models TN S-21099 4 PIVOT BOLT KIT QUIK-ALIGN, Includes round head bolt, hardened washers and prevailing torque hex nut TN S-24679 2 SHOCK ABSORBERS Standard Shock Mount - Standard Travel, 3.5" to 4" RH MO 65509 S-23548 2 Standard Shock Mount - Standard Travel, 5.5" to 6.5" RH MO 65510 S-23650 2 Standard Shock Mount - Standard Travel, 7.5" to 14" RH MO 65512 S-23649 2 Standard Shock Mount - Standard Travel - High Damping, 5.5" to 6.5" RH TN S-23744 2 Standard Shock Mount - Extended Rebound, 6.5" RH MO 65511 S-23651 2 Standard Shock Mount - Extended Rebound - High Damping, 6.5" RH MO 65465 S-24579 2 Remote Shock Mount*** - Standard Travel, 12" to 14" RH MO 65519 S-2212 2 Remote Shock Mount*** - Standard Travel - High Damping, 5.5" to 6.5" RH TN S-23744 2 Remote Shock Mount*** - Extended Rebound, 6.5" to 9" MO 65519 S-2212 2 Remote Shock Mount*** - Extended Rebound - High Damping, 6.5" to 9" RH MO 65433 S-23316 2 AIR SPRING Standard Mount - 4" RH GZ 1R13-119 S-20010 2 Standard Mount - 3.5" and 4" RH, High Pressure GZ 1R12-367 S-20223 2 Standard Mount - 5.5" to 14" RH GZ 1R13-118 S-20127 2 Rotated Mount - 5.5 to 14 RH GZ 1R13-118 S-20414 2 Standard Mount - 6.5" RH, High Pressure, Short Bellows TN S-20716 2 Standard Mount - 7.5" to 14" RH, High Pressure GZ 1R12-375 S-20124 2 Rotated Mount - 7.5 to 14 RH, High Pressure GZ 1R12-375 S-20413 2 *** Clevis not included and not needed for remote shock mount