Technical Datasheet SNK605D00 Catalogue Page SNK60S00 ZK.5-SF-R PI-Spring Terminal Blocks For 5x0 fuses - with blown fuse indicator - Protect your circuits with 5x0 fuse terminal blocks compliant with IEC 6097-7-3 standard (fuse not supplied with the terminal blocks), - Simplify the distribution thanks to the jumper channels aligned with ZK-3P feed-through and ZK.5-S-R disconnect terminal blocks, - Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 ma). SNK609V00 SNK08F0000 3D CAD outline drawings available on "Control Product 3D" portal SNC05 F0000 PI-Spring Terminal Blocks.5 mm² AWG Ordering Details Color Grey, Dark Grey ey, Dark Grey 6 mm 0.36 in Spacing Type Order Code EAN Code Pack (ing) Weight ( pce) g ZK.5-SF-R3 SNK706R0000 37597068 6.30 Declarations and Certificates CE CB RoHS USR CNR CSA EAC BV DNV
Declarations and Certificates CE CE SND56U* CB CB SND60A0* RoHS RoHS SND30535F0* USR CNR USR CNR SND60A0* SND60A0* CSA CSA SND60A0* EAC EAC SND600A* BV DNV BV DNV SND603A0* SND603A0* Explosive Atmosphere: ATEX Classification Group Category Protection Method In the presence of explosive dust atmosphere, terminal blocks are to be installed in certified enclosure II D General Information Wire stripping length TH 35-7.5, TH 35-5 Denudage IP0 TH 35-7.5, TH 35-5 NEMA Ex e: increased security The following information must be strictly adhered to in order to guarantee the terminal block electrical, mechanical and environmental performance. Protection Rail IEC 6097- mm 0.33 in Operating tool Torque Flat screwdriver Screw clamp Flat screwdriver 3.5 mm 0.38 in Screw rail contact (Maximum value) Disconnect device Material Specifications Insulating material CTI Flammability Polyamide 600 V UL9 V0 NF F 6 IF Connecting capacity per clamp Rigid - Solid / Stranded conductor Flexible conductor Flexible conductor with non insulated ferrule Flexible conductor with insulated ferrule Gauge Ferrule maximum outer diameter or conductor insulation maximum outer diameter Needle flame testec 6065--5 Compliant PI Spring IEC6097-7-3 UL59 0.... mm² 6... AWG IEC6097-7-3 0.....5 mm² 0.....5 mm² 6... AWG 0.....5 mm² 6... AWG A /.3 mm Dia. IEC 6097- Ferrule 5 mm 0.87 in The "Connecting capacity with ferrule" data is guaranteed with ABB crimping tool PS-3 (crimping capacity up to mm²). Technical Datasheet SNK605D00 ABB
Multi Connecting capacity per clamp Rigid - Solid / Stranded conductors Flexible conductors Flexible conductors with twin ferrule 0.... 0.5 mm² 6... 0 AWG Don't mix solid and flexible conductors in the same clamp Don't mix solid or flexible conductors of different sizes in the same clamp The "Connecting capacity with ferrule" data is guaranteed with ABB crimping tool PS-3 (crimping capacity up to mm²) Cross section Rated cross section IEC6097-7-3.5 mm² UL59 AWG Maximum Cross section mm² AWG Electrical characteristics Current Rated current IEC6097-7-3 6.3 A Field and factory wiring Cat. UL 59 6 A Factory wiring Cat. UL 59 CSA-C-. n 58 6 A Maximum Exe current IEC/EN 60079-7 Rated short-time withstand current s (Icw) IEC6097-7-3 Short-time withstand current Rated short-circuit withstand current Max. current (5 temperature increase) / Max. cross section (mm²) Maximum short circuit current (s) 0.5 s 5 s s 30 s min UL 59 396 A mm² Short Circuit Current Rating (SCCR) SA UL 59 supplement SCCR UL 59 With the following configurations: Suitable conductor wire range Maximum voltage Fuse class / Max. amp. Rating J T RK RK5 G CC Voltage Rated voltage IEC 6097-0 V Rated voltage UL 59 300 V Use Group UL 59 B, C Rated voltage CSA-C-. n 58 300 V Rated voltage Ex e IEC/ EN 60079-7 Rated impulse withstand voltage IEC 6097-6000 V Dielectric test voltage IEC 6097- Pollution degree IEC 6097-3 Overvoltage category IEC 6097- III ABB Technical Datasheet SNK605D00 3
Temperature range Ambient temperature min/max Storage -55... + C Installing -5... +0 C Service -55... + C -67... +30 F +3... + F -67... +30 F Current Derating curve for continuous service temperature Dissipated power Maximum dissipated power at rated current Maximum dissipated power at maximum Exe current IEC 6097-.6 W IEC 60079-7 Rated power dissipation at an ambient temperature of 3 C - IEC 6097-7-3 Separate arrangement / Overload and short-circuit protection.5 Separate arrangement / Exclusive short-circuit protection fuse and feed-through blocks Compound arrangement / Overload and short-circuit protection.6 Compound arrangement / Exclusive short-circuit protection 5 fuse blocks Environmental Characteristics Additional climatic tests Dry heat Cyclic damp heat Cold Damp heat steady state IEC 60068- Compliant Temperature C Duration of test 96 h IEC 60068-30 Compliant Temperature 55 C Relative humidity 95 % Number of cycles ( cycle = h) IEC 60068- Compliant Temperature -55 C Duration of test 96 h IEC 60068--78 Compliant Temperature 0 C Relative humidity 93 % Duration of test 96 h Corrosion Salt mist IEC 60068- Compliant Duration of test 00 h Concentration 5 % SO ISO 6988 Compliant Duration of test 8 h Concentration 0. dm³ Flowing mixed gas corrosion test IEC 60068-60 Number of the test method Duration of test Compliant 3 j Technical Datasheet SNK605D00 ABB
Vibrations and shocks Sinusoidal vibrations Functional random vibrations Category Class B 3 axes Long life testing at increased random vibrations Category Class B 3 axes Shock Category Class B 3 axes IEC 60068--6 Compliant Frequency range 5... 0 Hz Number of cycles Acceleration 7 m/s² IEC 6373 Compliant Duration of test 0 mn Frequency range 5... Hz Acceleration m/s² IEC 6373 Compliant Duration of test 5 h Frequency range 5... Hz Acceleration 5,7 m/s² IEC 6373 Compliant Duration of test 30 ms Acceleration 5 G ZK.5-SF-R Terminal Block Accessories Compatibility Some accessories may modify the terminal block's rating. See complete information in the accessories catalog page. Description Type Order Code Pack (ing) Weight pieces g ( pce) MG-CPM 3 SNB079R06 680 0.73 3 5 6 7 7 8 9 9 End Sections End Stops End Stops End Stops Circuit Separators Test Connectors Test Adapters Test Adapters Cross Spacing Jumpers Tools Tools Spacers MC5 MC5-YL MC5PA MC6 MC6-YL MC6PA PROCAP5 UMH PROCAP6 SAT6 PR3.G PR PR5 PR30 PR3.Z PR EK.5-3P BAM BAZ BAZH CS-R3 TC5-R TP TP JB85-3 PS-3 JB5- JB5-3 JB6- JB6-3 JB6- JB6-5 JB6- JB6- ES-TC6 SNK0000R0000 SNK000R0000 SNK9999R0000 SNK000R0000 SNK00R0000 SNK59999R0000 SNK900609R0000 SNK9006R0000 SNK9006R0000 SNK90065R0000 SNA6800R0300 SNA680R0 SNA68700R00 SNA730R00 SNA7300R700 SNA7859R000 SNK7059R0000 SNK90000R0000 SNK90000R0000 SNK900R0000 SNK9007R0000 SNK9000R0000 SNK90003R0000 SNK90005R0000 SNK900603R0000 SNK9006R0000 SNK900659R0000 SNK90530R0000 SNK905303R0000 SNK90630R0000 SNK906303R0000 SNK90630R0000 SNK906305R0000 SNK9063R0000 SNK9063R0000 SNK9005R0000 0 0 0 0 5 0 0 0 0 0 0 9.00 9.00.00.00.00.00 0.70 0.0 0.80 6.00 78.00 95.00 700 38.00 78.00 88.00.0.00 5.30.00 6.0 5.0.70.0.80 380.00.30.00.30..90 3.60 7.0 38. 0.80 ABB Technical Datasheet SNK605D00 5
Contact us ABB France Electrification Products Division PG Connection 3, rue Jean Perrin F-69687 Chassieu cedex / France Tel. +33 (0) 7 7 Fax +33 (0) 7 935 Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB. Copyright 0 ABB All rights reserved SNK605D00 - PDF