Ponta Beam Supply System Medical Supply Units Featuring a wide range of beam lengths, column types and workstation options to choose from, the versatile Dräger Ponta gives you the ability to supply and position medical equipment and devices for enhanced workspace efficiency. MT-466-2008
02 Ponta Beam Supply System Benefits The Dräger Ponta Featuring a wide range of beam lengths, column types and workstation options to choose from, the versatile Dräger Ponta gives you the ability to supply and position medical equipment and devices for enhanced workspace efficiency. Enhanced versatility The Dräger Ponta beam ceiling supply unit was designed to enhance care area efficiency in a number of ways. By getting devices and media supplies off the floor and positioned exactly where you need them, the Dräger supports improved patient access, optimized workspace ergonomics, overall ward hygiene as well as faster cleanup and turnaround times. Integrated lighting for both staff and patients means both added safety and comfort. Together with our C-, E- and S-workstations, the Ponta lets you completely reconfigure any care area within minutes. Custom-built to your specifications Ponta beam systems are available in lengths of 2200, 2800, 3100, 3500 mm. Different shuttle types, supply heads and columns can be combined to provide a high degree of workstation configurability. Workstation C The C-workstations are designed for maximum utilization of space. The equipment pole and carrier feature a very slim design. Medical devices can be positioned anywhere along the length of the beam. A total load of up to 150 kg is possible. Gas, electricity and IT terminals are located in the beam. Workstation E The E-workstations provide convenient, ergonomic positioning of terminals for medical gases, electricity and IT within the column or head. This supports efficient equipment exchange and saves precious time during transport or critical situations. Additional terminals can be located in the beam. It can handle loads of up to 120 kg. A pneumatic brake prevents unintentional movement. Workstation S The S-workstations maximize positioning flexibility by incorporating a rotating arm. It allows the workstation to be positioned to the side or head of the bed. This workstation is rated for loads of up to 100 kg. Both shuttle and arm include a pneumatic brake. Terminals for medical gases, electricity and IT are conveniently positioned and additional terminals can be located in the beam.
Ponta Beam Supply System 03 Related Products Dräger Gemina DUO Whether you are equipping an emergency room, an intensive care unit, an intermediate care unit or a recovery room, the Dräger GeminaDUO wall-mounted supply column system lets you choose from a wide range of configurations and options, helping to create a workspace for efficient, patient-centred care. MT-5977-2008 D-31490-2011 Agila Ceiling Supply Unit Featuring a wide range of configurations and options to choose from, the compact and highly ergonomic Dräger Agila family uses a minimum of precious care care-area.
04 Ponta Beam Supply System Technical Data PONTA Ceiling fixation Heavy duty anchors and suspension tubes Torque at the ceiling Max. 1100 Nm per suspension tube Suspension tubes Lengths available Diameter Load capacity 1000, 1500, 2000 mm - Can be shortened as required 110 mm 250 kg each Supply beam Recommended clearance height (under side of beam to floor) Beam length Beam width Beam height Beam weight Beam color Color for installation plates End-cap length C-shuttle (supplies in beam) 1800-2000 mm E-shuttle (supplies in column/head) 2100 mm 1) S-shuttle (supplies in column/head) 2350 mm 1) 2200, 2800, 3100, 3500 mm - Custom lengths available on request 588 mm 212 mm C/H type 25,5 kg/m 2) E/S type 28 kg/m 2) NCS-S-0500 N: white Powder coated Anodized aluminum, NCS-S-0500 N, Dräger Munsel blue, according to Color Line concept, others on request - powder coated 121 mm each Shuttles Type C Types E / HE Types S / HS Load capacity shuttle Under each shuttle 150 kg Under each shuttle 150 kg Under each shuttle 150 kg Standard rail On front of shuttle 25 x 10 x 294 mm On front of shuttle 25 x 10 x 294 mm Load capacity rail 10 kg 10 kg 10 kg Linear travel Brakes Complete length of beam/beams From central point (positioned as required) ± 550 mm (total 1100 mm) Mechanical Linear travel and carrier rotation Pneumatic for linear travel Friction for Column or Head Optional Pneumatic brake for Column or Head On front of shuttle 25 x 10 x 294 mm From central point (positioned as required) ± 550 mm (total 1100 mm) Pneumatic for linear travel and swivel arm Friction for Column or Head Optional Pneumatic brake for Column or Head Maximum load 3) Equipment carrier pole 60 kg with Agila head or column or with Agila head or column or Equipment carrier rack 130 kg Movita head or column: 120 kg Movita head or column: 100 kg Rotation Equipment carrier 170 330 Swiveling arm 330 (Length swiveling arm 400 mm) 1) If supplies are also located in the beam then a clearance height is required that permits ergonomic use! 2) With mixture of shuttles use highest value
Ponta Beam Supply System 05 Technical Data 3) Maximum load that can be carried on the supply head or column LIGHTING SYSTEM Indirect light 4) - standard Reading/Examination light 4) - optional Night light 4) - option Navigation light floor - option Power supply Illuminants Control 100-127 V, 220-240 V, 50-60 Hz In front profile, removable cover, 100-127 V, 220-240 V, 50-60 Hz 100-127 V, 220-240 V, 50-60 Hz In bottom of column, 100-127 V, 220-240 V, 50-60 Hz CIS 220-240 V, 50-60 Hz (Circadian Illumination System) - option RGB light (Red, Green, Blue) - option 220-240 V, 50-60 Hz 2 or 3 x 54 W fluorescent tubes according to requirements Switch/rotational or touch dimming 2 x 24 W fluorescent tubes Switch/rotational or touch dimming 1 x 7 W fluorescent tubes Switch 1 x 7.5 W LED spot Switch or touch dimming 2 x 54 W (1 x 8.000 K, 1 x 2.700 K) 3 x 54 W fluorescent tubes (1 x red, 1 x green, 1 x blue) Switch RGB operating panel Installation capacity Beam Agila Head/Column Movita Head/Column for Gas, electricity, IT terminal units, etc. - as required. See technical specification. 74 outlets (Ponta C 3500 mm) 51 outlets (e.g. Agila Column 1500 mm) 102 outlets (e.g. Movita Column 1500 mm) Standards According to Medical Device Directive MDD 93/42/EWG Class II b Medical electrical devices DIN EN 60601 1 Medical electrical devices DIN EN 60601-1-2 Medical Supply Units DIN EN ISO 11197 Risk analysis Medical products EN ISO 14071 UMDNS code 18-046 Ambient conditions During operation During storage Temperatur from +5 C up to +40 C from -20 C up to +60 C Relative humidity < 100% < 100% 4) According to DIN EN 12464-1 Data for planning software on request
06 Ponta Beam Supply System Notes 90 66 664 15-04-2 Communications & Sales Marketing PP LE Printed in Germany Chlorine-free environmentally compatible Subject to modifications 2015 Drägerwerk AG & Co. KGaA CORPORATE HEADQUARTERS Drägerwerk AG & Co. KGaA Moislinger Allee 53 55 23558 Lübeck, Germany www.draeger.com Manufacturer: Dräger Medical GmbH Moislinger Allee 53-55 23558 Lübeck, Germany As of August 2015 Dräger Medical GmbH changes to Drägerwerk AG & Co. KGaA REGION EUROPE CENTRAL AND EUROPE NORTH Dräger Medical GmbH Moislinger Allee 53-55 23558 Lübeck, Germany Tel +49 451 882 0 Fax +49 451 882 2080 info@draeger.com REGION EUROPE SOUTH Dräger Médical S.A.S. Parc de Haute Technologie d'antony 2 25, rue Georges Besse 92182 Antony Cedex, France Tel +33 1 46 11 56 00 Fax +33 1 40 96 97 20 dlmfr-contact@draeger.com REGION MIDDLE EAST, AFRICA Dräger Medical GmbH Branch Office P.O. Box 505108 Dubai, United Arab Emirates Tel +971 4 4294 600 Fax +971 4 4294 699 contactuae@draeger.com REGION ASIA / PACIFIC Draeger Medical South East Asia Pte Ltd. 25 International Business Park #04-27/29 German Centre Singapore 609916, Singapore Tel +65 6572 4388 Fax +65 6572 4399 asia.pacific@draeger.com REGION CENTRAL AND SOUTH AMERICA Dräger Panama Comercial S. de R.L. Complejo Business Park, V tower, 10th floor Panama City Tel +507 377 9100 Fax +507 377 9130 contactcsa@draeger.com Locate your Regional Sales Representative at: www.draeger.com/contact