Highsun Time to go global Create with most professional high-speed plastic solution
LEADING ADVANTAGES 1 2 3 HIGHER-RIGIDITY & STRONGER MECHANICAL STRUCTURE HIGH-SPEED PERFORMANCE ADVANCED DESIGN & HIGHER QUALITY OF MAIN COMPONENTS 4 MASS PRODUCE&EXTENSIVE APPLICATIONS
HXH-330
HXH330 Specification of HXH330 Screw diameter mm 55 Screw L/D ratio 24 Injection capacity in theory cm 3 582 Injection weight (Ps) g 529 Injection pressure MPa 185 Injection speed mm/s 300 Screw speed r/min 310 Clamping force kn 3300 Opening stroke mm 625 Max mold height mm 650 Min mould height mm 250 Space between tie-bar mm 720x670 Ejector force kn 125 Ejector stroke mm 180 Ejector No 13 Pump pressure MPa 16 Motor power KW 37x2 Heating power KW 20.3 Machine dimension m 7.02x1.77x2.18 Machine weight t 13
HXH-250
HXH250 Specification of HXH250 Screw diameter mm 50 Screw L/D ratio 24 Injection capacity in theory cm 3 422 Injection weight (Ps) g 384 Injection pressure MPa 175 Injection speed mm/s 300 Screw speed r/min 450 Clamping force kn 2500 Opening stroke mm 530 Max mold height mm 600 Min mould height mm 230 Space between tie-bar mm 620X570 Ejector force kn 80 Ejector stroke mm 150 Pump pressure MPa 16 Motor power kw 30x2 Heating power KW 18 Machine dimension m 6.80x1.80x2.00 Machine weight t 9.5
HIGHER-RIGIDITY OF MECHANICAL STRUCTURE Optimized design of complete mould platen and toggle structure with best stress analysis Adopt cast iron QT550-2 of cast iron, hardness: 245-295BH(Brinell Hardness:normally is 160-210 of QT450-10) tie-bar supplied by TAIWAN JIANGJUN; Using graphite steel of bushes improve bearing resistance and abrasive resistance HXH M.S Completed steel plate folding base structure 2ton much heavier than normal models Bigger foot-pad improving with stability of foundation www.themegallery.com
HIGHER-RIGIDITY OF MECHANICAL STRUCTURE
HIGHER-RIGIDITY OF BASE FRAME Self-produced base frame old design HX design Welded with steel bars, the weld cracks caused lower strength Frame welded with one set steel plate with folded edge has more strong strength and steel.
HIGHSPEED PERFORMANCE Linear guide : Decrease with friction force for fast injection Single injection cylinder: decrease inertia for injection and improve speed FAST injection speed 300mm/s Accumulator: control with pilot valve fulfill fast instant injection
HIGHSPEED PERFORMANCE
HIGHSPEED PERFORMANCE Motion Synchronou s of opening and charging Servo valve: close loop Control of mold close & open
HIGHSPEED PERFORMANCE Enlarged power system Double motor+double Driver+Double pump
HIGHSPEED PERFORMANCE SERVO MOTOR SYSTEM HXH250 30KW * 2 HXH330 37KW * 2
HIGHER QUALITY OF MAIN COMPONENTS COMPONENTS SERVO MOTOR SERVO DRIVER PUMP PLC SERVO VALVE BRAND PHASE-ITALY AUSTONE-USA SITTIMA-ITALY TECHMATION TECH580-TAIWAN VTOZ-JV.ITALY DIRECTION VALVE VICKERS-USA www.themegallery.com
PLC:TECHMATION TECH-5
OIL LUBRICATION & NM INFRARED HEATING
MAGNETOSTRICTIVE DISPLACEMENT SENSOR
DOUBLE OIL TANK&COOLING SYSTEM
FEATURE New model PLC: Techmation Tech5 ADVANCED DESIGN FUNCTION Flexible& Accurate controling of double servosystem, intelligent matching power in & out, display with energy consumption on screen. NM infrared heating system Magnetostrictive displacement sensor Double oil tank Double cooling cylinder Oil lubrication Super energy saving (70% saving compare ordinary heating band); higher-efficiency heating: 15mins; better temperature holding Linear, absolute measurement non-contact measurement; highest reliability Rugged industrial displacement sensors non-linear accuracy of ± 0.01% Supply with two pump system, realize highspeed of the hydraulic response Separated two cooling system, progress with cooling efficiency for oil system timing setfor mechanical lubricating. Supply with clean lubrication system especially for food packing & medicine products
MASS PRODUCE 1st IMM manufacturer in China who start mass produce of high-speed series Complete range of models: 100-500Ton
MASS PRODUCE
EXTENSIVE APPLICATIONS Thin-wall taken away box(thickness: 0.35-0.4mm) Hot-runner mould,4 cavities Cycle time:3.8-4.5s(equipped with robot sytem) P.C: 3600pcs/hour
EXTENSIVE APPLICATION Disposable fork/spoon(l:151mm,w:2g) Fully hot runner mould,32 cavities Cycle time:6-7s(equipped with robot sytem) P.C: 16500pcs/hour
EXTENSIVE APPLICATION
HX-HIGHSUN in Ningbo China HX-HIGHSUN in Incheon Korea