HDBI BLOWERS OEM and Industrial Air Handling Specialist BACKWARD INCLINED CLASS II CLASS III CLASS IV 797 Snider Road, Mason, OH 45040-915 Telephone: 51-57-000 Visit us at www.cincinnatifan.com for more information. Cat. No. HDBI-0711 Supersedes HDBI-100
Since the founding of Cincinnati Fan in 195, the company s mission has been to provide quality products at competitive prices, backed by dependable service. This mission is carried out by specializing in the market for industrial air handling products up to 125 HP. But specialization does not mean the product line is small. Cincinnati Fan offers a wide variety of standard and customized products, production flexibility, and customer responsiveness. Cincinnati Fan has over 170 experienced sales engineers across the U.S. and Canada ready to serve your air handling needs. 2 A Company That Stands Behind Its Product A) Backward inclined blades are fabricated of heavy-gauge, high-strength steel to assure long lasting, efficient operation. B) Turned, ground and polished shafting assures smooth operation. A rust preventive coating is applied prior to shipment. C) Heavy-duty, self-aligning, relubricatable, ball bearings in castiron pillow blocks. Bearings are selected for optimal performance depending on fan size and class. D) Bearing base is heavy steel construction with internal supports to maximize rigidity and assure long equipment life. Arrangement #1 fans can be converted to arrangement #9 with the addition of the motor slide base. E) Inlet side support is used to assure a vibration-free, stable housing. F) Slip collar inlet (not shown) is used for duct work connection. Flanged inlet optional. G) Inlet bell is designed for smooth air entrance into the wheel inlet for maximum efficiency. H) Reversible housing provides increased configuration flexibility. Removable side plates allow the wheel to be removed from the motor or inlet side of the housing. Housings are rotatable in 45 degree increments. Wheels are not reversible. See note at right. Visit us at www.cincinnatifan.com for more information. HDBI FEATURES Cincinnati Fan can provide: Technical evaluation for correct performance conditions. Review of air stream and ambient conditions that require special attention. Selection of proper components to meet required design specifications. Selection of proper accessories. System analysis for proper fan design. Cincinnati Fan operates in a modern facility specifically designed for world class manufacturing enabling us to build standard products to order, including accessories, and ship within 10 to 15 working days. With support like this, you can be sure your Cincinnati Fan product will be well-built and will provide maximum dependability and longevity. Shown with optional discharge flange. B C NOTE: HDBI-0 and HDBI-0 housings are not rotatable or reversible. H D A G E
ADVANTAGES OF DIRECT DRIVE ARRANGEMENT #4 & #4HM All sizes available with 2 wheel diameters in 100% to 50% widths in 5% increments Shown with optional inlet and discharge flanges. ADVANTAGES Compact - requires less space. Weighs Less - requires less supporting structure. Less Maintenance - no belts or fan bearings to replace. Less Expensive - above features result in lower first cost and lower maintenance cost. More Ratings - the combination of several motor speeds, two wheel diameters and eleven fan widths results in a vast selection of direct drive ratings. Temperature - good up to 200 F. (9 C.) Shown with optional inlet and discharge flanges. OPTIONAL ARRANGEMENT 4HM HORIZONTAL MOUNTING Ideal for bag house or other equipment requiring the simplicity of a horizontally mounted fan. Motors are limited to frame 5T maximum. This mounting is available on all sizes. All horizontal mount housings are non-reversible. Inlet flange is optional and must be added if required. Supporting equipment must be adequate to support weights shown on page 2 plus motor weight.
SIX STANDARD ARRANGEMENTS ARRANGEMENT 1 (V-BELT DRIVE) Motor not mounted on bearing base. Wheel mounted on fan shaft with two pillow block bearings. Maximum temperature of standard design: 00 F. (149 C.); high temperature designs up to 750 F. (98 C.) (Shown with optional discharge flange.) ARRANGEMENT 4 (DIRECT DRIVE) Motor mounted on motor base. Wheel mounted on motor shaft. Maximum temperature of standard design: 200 F (9 C.); high temperature design not available. (Shown with shaft/coupling guard removed and optional discharge flange.) ARRANGEMENT 8 (DIRECT DRIVE) Motor mounted on motor base extending beyond the bearing base. Shaft/coupling guard is standard. Wheel mounted on fan shaft with two pillow block bearings. Maximum temperature of standard design: 00 F. (149 C.); high temperature designs up to 750 F. (98 C.) (Shown with optional discharge flange.) ARRANGEMENT 9 (V-BELT DRIVE) Motor mounted on an adjustable slide base on the side of the bearing base. Wheel mounted on fan shaft with two pillow block bearings. Maximum temperature of standard design: 00 F. (149 C.) high temperature designs up to 750 F. (98 C.) ARRANGEMENT 9CB (V-BELT DRIVE) Same as Arrangement 9 except motor and fan are mounted on a common channel base. Maximum temperature of standard design: 00 F. (149 C.); high temperature designs up to 750 F. (98 C.) 4 (Shown with weather cover removed) ARRANGEMENT 10 (V-BELT DRIVE) Motor mounted on adjustable base under the fan shaft. Wheel mounted on fan shaft with two pillow block bearings. Maximum temperature of standard design: 00 F. (149 C.); high temperature design not available.
OPTIONAL ACCESSORIES Shaft Seal Teflon shaft seal good to 400 F. (204 C.) Ceramic fiber gasket material with steel cover plate above 400 F. (205 C.) Outlet Damper All dampers are 1 or 2 blade. All dampers 10" deep flange to flange. Opposed blade construction is standard. Belt Guard Belt guard standard on Arrangement 9 and 9CB only. Painted safety yellow. Inlet Vane Control Linkage assembly is external on smaller sizes, internal on larger sizes. Inlet vane depth varies with inlet diameter. Contact your local Cincinnati Fan sales representative for dimensions. DANGER Inspection Door Bolted or quick-release doors positioned as specified on scroll. Rubber gasket standard up to 250 F. (121 C.) Ceramic fiber gasket standard at temperatures above 250 F (122 C.). Drain Connection /4" pipe coupling welded to lowest point of housing. Not required on BH discharge position. Shaft and/or Heat Slinger Guard Guard available on Arrangement 1, 9 and 9CB. Covers bearings and shaft between fan housing and belt guard. Has extended lube lines. Standard on high temperature fans above 01 F. (150 C). Painted safety yellow. All fans & blowers shown have rotating parts and pinch points. Severe personal injury can result if operated without guards. Stay away from rotating equipment unless it is disconnected from its power source. Read operating instructions. Inlet & Outlet Flanges Flanges on inlet and outlet available where installation requires tight duct connections. Standard hole pattern furnished. Outlet flange not available on some discharge positions. Outlet flange standard on all sizes 270 through 0. See page 1 for dimensions. Inlet & Outlet Guards Ring guard on inlet and expanded metal on discharge. Meet OSHA approval. 5
SPARK-RESISTANT CONSTRUCTION Type A: All parts in contact with airstream are of nonferrous material. (Contact your local Cincinnati Fan sales representative). Type B: Fabricated aluminum wheel and aluminum rubbing ring on motor shaft or fan shaft. Maximum Temperature 200 F. (9 C.) all arrangements. Type C: Consists of aluminum inlet bell and aluminum plate on drive side of the fan. Maximum Temperature is the same as for high temperature construction below for each arrangement. WARNING The use of aluminum or aluminum alloys in the presence of steel which has been allowed to rust requires special consideration. Research by the U.S. Bureau of Mines and others has shown that aluminum impellers rubbing on rusty steel may cause high intensity sparking. The use of the above Standard in no way implies a guarantee of safety for any level of spark resistance. Spark-resistant construction also does not protect against ignition of explosive gases caused by catastrophic failure or from any airstream material that may be present in a system. Maximum RPM for Aluminum Wheels* Size 120 10 150 10 180 200 220 240 270 00 0 0 Max. RPM 5400 4999 4712 4285 885 574 550 287 247 200 200 1950 * Up to 200 F. (9 C.) Consult your local Cincinnati Fan sales representative for higher temperatures and/or higher RPMs. HIGH TEMPERATURE CONSTRUCTION Standard Construction: Arrangements 1, 8, 9, 9CB and 10 suitable to 00 F. (149 C.) Arrangements 4 and 4HM suitable to 200 F. (9 C.) 201-400 F. (94-204 C.) Construction: Standard fan with heat slinger, slinger guard, teflon shaft seal and extended hub on wheel. Arrangements 4 and 4HM only. 01-400 F. (150-204 C.) Construction: Standard fan with heat slinger, fan shaft and slinger guard and teflon shaft seal. Arrangements 1, 8, 9 and 9CB. 401-00 F. (205-1 C.) Construction: Standard fan with heat slinger, fan shaft and slinger guard, high temp shaft seal, gaskets and paint. Arrangements 1, 8, 9 and 9CB. 01-750 F. (17-98 C.) Construction: Standard fan with high temp bearings, heat slinger, fan shaft and slinger guard, high temp shaft seal, gaskets and paint. Arrangements 1, 8, 9 and 9CB TEMPERATURE RANGE Up to 175 F. 17-200 201-00 01-400 401-500 501-00 01-700 701-750 Steel wheels only. MAXIMUM RPM REDUCTION FACTOR 0% 2% 4% 7% 11% 15% 20% 0% AIR TEMP. F 0 40 70 80 100 120 140 10 180 200 250 00 50 400 450 500 550 00 50 700 750 TEMPERATURE - ALTITUDE CONVERSIONS AIR ALTITUDE IN FEET ABOVE SEA LEVEL TEMP. C 0 1000 2000 000 4000 5000 000 7000 8000 9000 10000-18.87.91.94.98 1.01 1.05 1.09 1.1 1.17 1.22 1.2 4.94.98 1.02 1.0 1.10 1.14 1.19 1 2 1.28 1.2 1. 21 1.00 1.04 1.08 1.12 1.1 1.20 1.25 1.0 1.5 1.40 1.45 27 1.02 1.0 1.10 1.14 1.19 1.2 1.28 1. 1.8 1.4 1.48 8 1.0 1.10 1.14 1.19 1.2 1.28 1. 1.8 1.4 1.48 1.54 49 1.09 1.14 1.18 1.2 1.28 1.2 1.8 1.4 1.48 1.5 1.58 0 1.1 1.18 1.22 1.27 1.2 1.7 1.42 1.48 1.54 1.58 1.5 71 1.17 1.22 1.2 1.1 1. 1.42 1.47 1.5 1.59 1.4 1.70 82 1.21 1.2 1.0 1. 1.41 1.4 1.52 1.58 1.4 1.70 1.75 9 1.25 1.29 1.4 1.40 1.45 1.51 1.57 1. 1.9 1.75 1.81 121 1.4 1.9 1.45 1.50 1.5 1.2 1.8 1.74 1.82 1.88 1.94 149 1.4 1.49 1.55 1.1 1.7 1.74 1.80 1.87 1.94 2.00 2.08 177 1.5 1.59 1.5 1.72 1.78 1.85 1.92 2.00 2.07 2.14 2.22 205 1.2 1.9 1.75 1.82 1.89 1.9 2.04 2.12 2.20 2.27 2.5 22 1.72 1.79 1.8 1.9 2.00 2.08 2.1 2.24 2. 2.41 2.50 20 1.81 1.88 1.9 2.0 2.11 2.19 2.28 2. 2.4 2.54 2.2 288 1.91 1.98 2.0 2.14 2.22 2.0 2.40 2.49 2.58 2.8 2.77 15 2.00 2.08 2.1 2.24 2. 2.42 2.50 2.1 2.71 2.80 2.90 4 2.10 2.18 2.2 2.5 2.44 2.54 2. 2.74 2.84 2.94.04 71 2.19 2.27 2. 2.4 2.55 2.5 2.75 2.8 2.97.0.18 98 2.28 2.7 2.47 2.5 2. 2.7 2.87 2.98.10.19.1 Fan performance tables are developed using standard air which is 70 F., 29.92" barometric pressure and.075 Ibs. per cubic foot. Density changes resulting from temperature or barometric pressure variations (such as higher altitudes) must be corrected to standard conditions before selecting a fan based on standard performance data. Temperature and/or altitude conversion factors are used in making corrections to standard conditions. EXAMPLE: Select a belt driven HDBI-00 to deliver 827 CFM at.50" SP at 200 F. (9 C.), and 7000' altitude. STEP 1. From the table, conversion factor is 1.. STEP 2. Correct static pressure is: 1. x.50" SP =.81" SP at standard conditions. STEP. Check HDBI catalog for 827 CFM at.81" SP. We select a belt driven HDBI-00 and interpolation gives 0 RPM and 1.8 BHP. STEP 4. Correct the BHP for the lighter air: 1.8 1. = 1.12 BHP. A 1.5 HP motor will suffice at 200 F., and 7000' but not at standard conditions. Special motor insulation may be required due to altitude.
DIRECT DRIVE RATING TABLES CFM and BHP at Static Pressure Shown Ratings at 70 F.,.075 Density, Sea Level MODEL RPM 0" SP 1" SP 2" SP " SP 4" SP 5" SP HDBI-120 1150 1750 500 114..09 1740.1 480 2.51 11..9 282. 2.7 07. 2.85 281.00 2.1 279.20 HDBI-10 1150 1750 500 1540..1 244..5 488 4.50 1828..2 4457 4.8 108..59 4227 4.8 94 4.9 5 4.99 5 5.01 HDBI-150 1150 1750 500 2100..2 195..82 85.59 1175..28 2700..9 155.9 2070. 1.00 590 7.28 590 7.57 5405 7.71 5115 7.8 HDBI-10 1150 1750 500 2795..8 4250. 1. 8500 10.2 1875..4 70 1.5 8250 11.12 080 1.1 8000 11.55 2170 1.55 7750 11.98 740 12.2 7140 12.44 HDBI-180 1150 1750 500 780..9 5750 2.40 11500 17.58 2800..82 5195 2.8 11225 18.28 4495 2.8 10945 18.8 85 2.87 1070 19.44 1095 20.02 10055 20.2 HDBI-200 1150 1750 500 4975..99 7570.47 15140 27.79 95. 1.17 90.88 1480 28.74 2140. 1.10 25 4.09 1450 29.50 545 4.2 14225 0.27 490 4.14 1920 1.0 120 1.80 HDBI-220 1150 1750 915 1.5 10520 5.80 5955 1.99 9900.41 4720 2.11 9270.89 810 7.2 7755 7.9 820 7.42 HDBI-240 1150 1750 920 2.7 14045 9.9 8185.15 15 10.22 945.9 1280 10.92 4880.2 1190 11.44 11185 11.85 10205 11.97 HDBI-270 1150 1750 12885 4.8 1905 1.49 11780 5.4 18885 17.2 10550 5.79 18155 18.5 9010 5.9 17405 19.7 1575 20.00 15745 20. HDBI-00 1150 1750 1770 7.92 2890 27.92 1450 8.85 2095 29.54 1510 9.54 25290 0.79 10 9.98 24480 2.04 11525 9.89 205.0 2280.92 HDBI-0 1150 1750 2521 12.7 579 44.97 2217 1.95 4907 4.77 20784 15.04 4022 48.58 19242 15.79 1 50.8 17420 1.1 2251 52.19 1485 15.81 1254 5.42 HDBI-0 1150 1750 05 19.72 449 9.47 2907 21.2 4550 71.82 27597 22.80 4457 74.1 25940 2.84 4571 7.51 2428 24.79 4205 78.85 22104 24.9 4129 81.1 MODEL RPM " SP 7" SP 8" SP 9" SP 10" SP 11" SP HDBI-120 500 HDBI-10 500 HDBI-150 500 HDBI-10 500 HDBI-180 500 HDBI-200 500 HDBI-240 1750 HDBI-270 1750 HDBI-00 1750 HDBI-0 1750 HDBI-0 1150 1750 207.18 299 4.9 4810 7.94 820 12.1 9705 20.5 1240 2.1 9175 12.02 1470 20.81 2170 4.77 0240 54.5 19092 24.9 40522 82.1 1578 2.91 2595 4.85 4510 8.0 490 12.7 950 20.80 12850 2.44 125 20.87 2085 5.19 2922 55.71 941 84.10 2172 4.71 4140 8.02 10 12.90 8990 21.01 1245 2.75 11950 20.29 19515 5.4 281 5.57 809 85.58 700 7.87 5825 1.04 820 21.20 12075.04 18025 5.05 284 5.77 720 87.0 200 7. 50 12.8 8255 21.40 1175.0 2550 5.98 5851 87.5 4870 12.4 7885 21.59 11270.5 274 5.4 4448 87.80 MODEL RPM 12" SP 1" SP 14" SP 15" SP 1" SP 17" SP HDBI-10 500 HDBI-180 500 HDBI-200 500 HDBI-0 1750 HDBI-0 1750 45 12.9 775 21.4 10870.8 2171 55.28 04 88.0 85 21.08 1045 4.09 105 87.17 25 20.74 995.87 28817 85.80 975.54 8775.15 810 2.70 Performance certified is for installation type B-Free inlet, Ducted Outlet. Performance ratings do not include the effects of appurtenances (accessories). See pages 25 or 2 for minimum motor frame sizes regardless of BHP. Cincinnati Fan & Ventilator Company certifies that the HDBI Heavy Duty Backward Inclined Fans shown on this page and on pages 12 through 2 are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. Fans are capable of operating to the maximum safe speeds shown on each performance table. These speeds permit obtaining the minimum SP/OV limits established as follows: CLASS II - 8.5" SP at 000 FPM to 4.25" SP at 4175 FPM. CLASS III - 1.5" SP at 780 FPM to.75" SP at 520 FPM. CLASS IV - 20" SP at 400 FPM to 10" SP at 400 FPM. 7
MODEL NUMBER RPM WHEEL TYPE DIRECT DRIVE RATING TABLES for partial width fans with two wheel types The partial width fan ratings shown on this page and on Pages 9,10 and 11 were derived from tests performed in accordance with AMCA Publication 211 and fan laws were applied to arrive at the data shown for partial width fans. However, none of the partial width fans or fans with SQBI wheels are licensed to bear the AMCA seal. All 100% width fans with HDBI wheels are licensed to bear the AMCA seal as shown on pages 7 and 12 through 2. FAN WIDTH 1" SP 2" SP " SP 4" SP 5" SP HDBI-120 1750 SQBI 1/2 81.2 00.2 1750 SQBI /4 1220.9 900.40 1750 HDBI FULL 11.9 1750 SQBI FULL 127.52 1201.5 500 HDBI 1/2 141 1.4 158 1.42 140 1.50 11 1.5 1190 1.0 107 1.59 500 SQBI 1/2 1858 1.87 1789 1.9 1712 2.0 127 2.08 159 2.1 147 2.14 500 HDBI /4 242 2.00 207 2.1 214 2.25 1974 2.5 1785 2.40 1555 2.8 500 SQBI /4 2788 2.80 28 2.9 258.04 2441.12 209.19 2155.21 500 HDBI FULL 282 2.7 07 2.85 281.00 2.1 279.20 207.18 500 SQBI FULL 717.7 578.91 424 4.05 255 4.1 079 4.2 2874 4.28 HDBI-10 1750 SQBI 1/2 1127.41 919.44 799.4 1750 SQBI /4 190.2 178.5 1199.70 1750 HDBI FULL 1828.2 108.59 1750 SQBI FULL 2254.8 188.87 1599.9 500 HDBI 1/2 2278 2.27 2175 2.9 205 2.4 195 2.5 1820 2.5 178 2.57 500 SQBI 1/2 2500.00 242.12 24.24 2254.1 211.9 205.45 500 HDBI /4 41.41 2.58 098.9 2929.80 270.84 251.8 500 SQBI /4 750 4.50 5 4.8 520 4.8 81 4.97 241 5.08 097 5.18 500 HDBI FULL 4457 4.8 4227 4.8 94 4.9 5 4.99 5 5.01 299 4.9 500 SQBI FULL 5000.00 484.24 49.48 4508. 422.77 410.90 HDBI-150 1750 SQBI 1/2 155. 121.71 1040.70 1750 SQBI /4 20 1.00 1982 1.0 150 1.05 1750 HDBI FULL 2700.9 2070 1.00 1750 SQBI FULL 071 1. 24 1.41 2080 1.41 500 HDBI 1/2 078.48 295.4 2845.79 270.8 2558.92 2405.97 500 SQBI 1/2 55 4.82 21 4.99 1 5.15 071 5.0 297 5.40 282 5.50 500 HDBI /4 41 5.22 4448 5.4 428 5.8 4054 5.78 8 5.87 08 5.9 500 SQBI /4 50 7.24 4891 7.48 4750 7.72 407 7.9 4451 8.11 4294 8.2 500 HDBI FULL 155.9 590 7.28 590 7.57 5405 7.71 5115 7.8 4810 7.94 500 SQBI FULL 710 9.5 522 9.97 10.0 14 10.1 594 10.81 5725 11.01 HDBI-10 1750 SQBI 1/2 2090 1.05 187 1.1 11 1.1 118 1.08 1750 SQBI /4 1 1.58 2809 1.9 2420 1.7 1775 1.1 1750 HDBI FULL 70 1.5 080 1.1 2170 1.55 1750 SQBI FULL 4181 2.11 74 2.2 227 2.1 2 2.15 500 HDBI 1/2 4125 5.5 4000 5.78 875 5.99 70.1 570.22 410.1 500 SQBI 1/2 4495 7.79 490 8.0 4285 8.24 4181 8.44 407 8.2 99 8.77 500 HDBI /4 188 8.4 000 8. 581 8.99 5595 9.20 555 9. 5115 9.4 500 SQBI /4 742 11.8 584 12.04 428 12.7 271 12. 11 12.92 595 1.1 500 HDBI FULL 8250 11.12 8000 11.55 7750 11.98 740 12.2 7140 12.44 820 12.1 500 SQBI FULL 8990 15.58 8779 1.0 8571 1.49 82 1.88 8151 17.2 797 17.54 HDBI-180 1750 SQBI 1/2 2871 1.71 27 1.82 278 1.89 2057 1.90 1489 1.7 1750 HDBI /4 89 1.88 71 1.97 274 2.00 1750 SQBI /4 407 2.5 955 2.7 57 2.84 08 2.85 22 2.59 1750 HDBI FULL 5195 2.8 4495 2.8 85 2.87 1750 SQBI FULL 574.42 527.5 475.78 4114.80 2978.45 500 HDBI 1/2 51 9.14 547 9.4 55 9.72 5198 10.01 5028 10.1 485 10.28 500 SQBI 1/2 091 12.7 5974 1.09 5858 1.9 574 1.7 527 1.9 5511 14.17 500 HDBI /4 8419 1.71 8209 14.15 800 14.58 779 15.02 7541 15.24 7279 15.42 500 SQBI /4 91. 19.14 891 19. 8787 20.09 814 20.51 8441 20.90 827 21.25 500 HDBI FULL 11225 18.28 10945 18.8 1070 19.44 1095 20.02 10055 20.2 9705 20.5 500 SQBI FULL 12181 25.52 11947 2.18 1171 2.79 1148 27.5 11255 27.87 11022 28.4 HDBI-200 1750 SQBI 1/2 94 2.85 58.02 71.1 045.18 212.09 1722 2.51 1750 HDBI /4 5220 2.91 47.07 407.17 29.11 1750 SQBI /4 5901 4.27 5487 4.5 5057 4.74 458 4.77 918 4. 258.77 1750 HDBI FULL 90.88 25 4.09 545 4.2 490 4.14 1750 SQBI FULL 788 5.9 717.05 74. 091. 5224.18 444 5.0 500 HDBI 1/2 7415 14.7 725 14.75 711 15.14 90 15.52 810 15.90 20 1.07 500 SQBI 1/2 828 21.5 815 21.94 8001 22.5 787 22.7 774 2.17 700 2.58 500 HDBI /4 1112 21.5 10898 22.1 109 22.70 10440 2.27 10215 2.85 990 24.10 500 SQBI /4 1240 2.29 12202 2.91 12002.52 11801 4.14 1101 4.7 11401 5.7 500 HDBI FULL 1480 28.74 1450 29.50 14225 0.27 1920 1.0 120 1.80 1240 2.1 500 SQBI FULL 157 4.05 1270 4.88 100 44.70 1575 45.52 1548 4.4 15201 47.1 Performance shown is for installation type B-Free inlet,ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). 8 " SP
CFM and BHP at Static Pressure Shown Ratings at 70 F.,.075 Density, Sea Level 7" SP 8" SP 9" SP 10" SP 11" SP 12" SP 1" SP 14" SP 10 2.15 1201 2.11 1021 1.95 199.22 1801.1 152 2.9 1578 2.91 21 4.29 2402 4.21 204.90 Requires a 14T frame or larger even though BHP is available in a 5 frame. See pages 25 or 2. 1951.47 188.48 1705.45 1559.9 147.14 2927 5.20 2758 5.22 2558 5.18 29 5.08 2021 4.71 2595 4.85 2172 4.71 90.9 77.97 411.91 119.78 295.28 2255 4.0 2070 4.01 2758 5.0 24 5. 2527 5.71 240 5.74 2244 5.8 2081 5.2 1817 5.5 108 4.9 8.05 105.02 417 8.41 95 8.48 791 8.5 10 8.1 7 8.52 121 8.4 2725 8.02 129.58 4510 8.0 4140 8.02 700 7.87 200 7. 551 11.21 5287 11.1 5055 11.41 481 11.49 4489 11.7 412 11.24 4 10.9 217 8.77 See additional HDBI-10 ratings at bottom of page 10. 245.8 080.45 291.52 280.4 859 8.91 74 9.0 28 9.12 50 9.20 70 9.24 227 9.25 07 9.22 2885 9.14 488 9.57 420 9.8 49 9.78 4020 9.5 5788 1. 518 1.54 5441 1.8 5255 1.79 505 1.8 4840 1.88 401 1.8 427 1.70 490 12.7 10 12.90 5825 1.04 50 12.8 4870 12.4 45 12.9 7718 17.82 7491 18.05 7255 18.25 700 18.9 741 18.48 45 18.51 14 18.45 579 18.27 See additional HDBI-180 ratings at bottom of page 10. 475 10.40 4495 10.51 410 10.0 4128 10.70 94 10.80 59 14.9 527 14.59 5150 14.75 5024 14.90 489 15.0 475 15.1 412 15.20 4459 15.24 701 15.0 74 15.7 45 15.90 191 1.05 5914 1.19 8090 21.58 7910 21.87 772 22.1 75 22. 79 22.55 714 22.70 918 22.80 89 22.8 950 20.80 8990 21.01 820 21.20 8255 21.40 7885 21.59 775 21.4 85 21.08 25 20.74 1078 28.77 10547 29.1 1001 29.51 10048 29.81 978 0.0 9512 0.2 9224 0.40 8918 0.48 See additional HDBI-200 ratings at bottom of pages 10 & 11. 425 1.22 2 1.8 08 1.52 588 1.5 55 1.78 5425 1.92 52 17.05 498 1.94 7458 2.88 717 24.18 7175 24.48 70 24.78 891 25.08 74 25.0 580 25.4 417 25.8 98 24. 949 24.5 905 24.78 875 24.98 845 25.17 815 25.7 7849 25.57 7451 25.40 11188 5.82 10975.27 1072.72 10550 7.17 107 7.2 10115 7.95 9870 8.01 92 8.07 12850 2.44 1245 2.75 12075.04 1175.0 11270.5 10870.8 1045 4.09 995.87 14917 47.7 144 48. 1450 48.9 140 49.5 178 50.1 1487 50.0 110 50.8 1284 50.7 9
DIRECT DRIVE RATING TABLES (cont d) The partial width fan ratings shown on this page and on Pages 8, 9 and 11 were derived from tests performed in accordance with AMCA Publication 211 and fan laws were applied to arrive at the data shown for partial width fans. However, none of the partial width fans or fans with SQBI wheels are licensed to bear the AMCA seal. All 100% width fans with HDBI wheels are licensed to bear the AMCA seal as shown on pages 7 and 12 through 2. MODEL WHEEL FAN 1" SP 2" SP " SP 4" SP 5" SP " SP NUMBER RPM TYPE WIDTH HDBI-220 1750 HDBI 1/2 4950.21 45.45 405. 878.70 1750 SQBI 1/2 575 4.4 5104 4.9 4777 4.8 444 4.97 4092 5.07 55 5.08 1750 HDBI /4 7425 4.81 95 5.17 548 5.45 581 5.54 1750 SQBI /4 80.5 75 7.0 71 7.25 4 7.45 18 7.0 548 7.2 1750 HDBI FULL 9900.41 9270.89 810 7.2 7755 7.9 820 7.42 1750 SQBI FULL 10750 8.87 10209 9.7 9555 9.7 888 9.9 8184 10.1 711 10.1 500 HDBI 1/2 104 2.77 10209 24.4 10054 24.91 9899 25.48 9744 2.05 9589 2.2 500 HDBI /4 15547 5. 1514.51 15081 7.7 14849 8.22 141 9.08 148 9.94 500 HDBI FULL 20729 47.54 20419 48.8 20109 49.82 19799 50.97 19488 52.11 19178 5.25 HDBI-240 1750 HDBI 1/2 8 5.11 40 5.4 5980 5.72 559 5.9 510 5.99 1750 SQBI 1/2 7250 7.12 955 7.47 18 7.72 258 7.92 5884 8.08 5497 8.21 1750 HDBI /4 10024 7.7 9510 8.19 8970 8.58 889 8.89 754 8.98 1750 SQBI /4 10875 10.8 104 11.20 9928 11.58 988 11.87 882 12.12 824 12.2 1750 HDBI FULL 15 10.22 1280 10.92 1190 11.44 11185 11.85 10205 11.97 9175 12.02 1750 SQBI FULL 14500 14.25 1911 14.9 127 15.4 12517 15.8 1179 1.1 10995 1.4 HDBI-270 1750 HDBI 1/2 944 8.81 9078 9.27 870 9.9 8288 10.00 787 10.2 75 10.42 1750 SQBI 1/2 974 11.4 9440 11.92 910 12. 8709 12.2 812 12.89 7898 1.10 1750 HDBI /4 1411 1.22 11 1.90 1054 14.5 1241 15.00 1180 15.47 11048 15.1 1750 SQBI /4 1447 17.20 1411 17.89 159 18.5 104 18.9 1249 19. 11848 19.5 1750 HDBI FULL 18885 17.2 18155 18.5 17405 19.7 1575 20.00 15745 20. 1470 20.81 1750 SQBI FULL 19529 22.9 18881 2.85 18212 24.71 17418 25.24 125 25.78 15797 2.21 HDBI-00 1750 HDBI 1/2 1048 14.77 1245 15.40 12240 1.02 1180 1.5 1140 1.9 10880 17.9 1750 SQBI 1/2 149 19.0 11 19.94 12775 20.57 1277 21.08 119 21.44 11495 21.81 1750 HDBI /4 19571 22.1 1898 2.09 180 24.0 17704 24.80 17010 25.44 120 2.08 1750 SQBI /4 20244 28.9 19704 29.91 191 0.8 1855 1.1 17904 2.1 17242 2.71 1750 HDBI FULL 2095 29.54 25290 0.79 24480 2.04 205.0 2280.92 2170 4.77 1750 SQBI FULL 2992 8.1 2272 9.87 25551 41.14 24754 42.15 2872 42.88 22990 4.1 HDBI-0 1750 HDBI 1/2 1745 2.8 17011 24.28 158 25.19 1125 2.09 1527 2.71 15120 27.28 1750 SQBI 1/2 19051 4.49 18555 5.1 18059 5.77 1758.25 1985.5 142.81 1750 HDBI /4 2180 5.07 2551.4 24852 7.78 24188 9.14 2441 40.07 2280 40.92 1750 SQBI /4 2857 51.7 2782 52.9 27088 5.5 207 54.8 25478 54.79 2448 55.21 1750 HDBI FULL 4907 4.77 4022 48.58 1 50.8 2251 52.19 1254 5.42 0240 54.5 1750 SQBI FULL 8102 8.98 7110 70.2 118 71.54 507 72.50 970 7.0 284 7.2 HDBI-0 1750 HDBI 1/2 22751 5.91 2228 7.08 21785 8.25 2102 9.4 20814 40.57 2021 41.1 1750 SQBI 1/2 25982 57.19 254 58.0 24884 58.9 24 59.79 2747 0.5 214 0.7 1750 HDBI /4 4127 5.8 402 55.2 278 57.8 1954 59.1 1221 0.85 091 1.9 1750 SQBI /4 897 85.79 8150 87.09 727 88.9 504 89.9 520 90.5 4702 91.10 1750 HDBI FULL 4550 71.82 4457 74.1 4571 7.51 4205 78.85 4129 81.1 40522 82.1 MODEL NUMBER RPM WHEEL TYPE FAN WIDTH 15" SP 1" SP 17" SP 18" SP 19" SP 20" SP HDBI-10 500 SQBI 1/2 24 8.9 2 8.1 500 SQBI /4 99 1.44 549 12.92 500 SQBI FULL 528 17.92 472 17.22 HDBI-180 500 SQBI 1/2 4295 15.24 4114 15.18 500 SQBI /4 442 22.8 171 22.78 500 SQBI FULL 8589 0.47 8229 0.7 HDBI-200 500 SQBI 1/2 254 25.42 091 25.4 5922 25.47 590 25.21 5457 24.9 5224 24.70 500 SQBI /4 981 8.1 917 8.18 8884 8.20 855 7.82 8185 7.44 78 7.0 500 SQBI FULL 12508 50.8 12182 50.91 11845 50.94 1180 50.4 10914 49.92 10449 49.41 HDBI-220 500 HDBI 1/2 7975 29.4 775 29.55 751 29.4 709 29.7 70 29.72 822 29.70 500 HDBI /4 119 44.19 110 44. 11297 44.4 1094 44.59 1000 44.58 102 44.54 500 HDBI FULL 15951 58.9 15507 59.10 150 59.28 1419 59.4 141 59.4 144 59.9 HDBI-0 1750 SQBI 1/2 825 1.9 1750 SQBI /4 1252 47.95 1750 SQBI FULL 1470.9 HDBI-0 1750 SQBI 1/2 11 0. 1504 59.99 119 59.7 11878 55.24 1750 SQBI /4 24497 90.49 22597 89.99 20429 89.50 17817 82.87 Performance shown is for installation type B-Free inlet,ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). 10
CFM and BHP at Static Pressure Shown Ratings at 70 F.,.075 Density, Sea Level 7" SP 8" SP 9" SP 10" SP 11" SP 12" SP 1" SP 14" SP 01 4.9 4591 7.4 See additional HDBI-220 ratings at bottom of page 10 and this page. 122 9.91 944 27.19 929 27.5 9105 27.9 8940 28.1 877 28.8 811 29.05 8420 29.29 8198 29.7 14151 40.79 1904 41.5 157 41.90 1411 42.4 114 4.02 12917 4.57 120 4.9 12297 44.0 1888 54.9 1859 55.1 18210 55.87 17881 5.1 17552 57.5 1722 58.10 1840 58.57 19 58.75 5045 8.27 444 8.17 41 7.81 757 12.40 9 12.25 542 11.71 10090 1.5 8929 1.4 728 15.1 7472 1.28 704 1.4 47 1.7 571 1.1 475 12.55 11208 19.92 1059 20.19 955 20.05 8597 19.74 714 18.8 125 20.87 11950 20.29 14945 2.5 14092 2.92 12874 2.7 114 2.2 9512 25.10 104 17.0 11044 22.1 10570 22.8 10097 22.2 907 22.84 892 22.70 8198 22.50 7281 22.0 5851 20.4 15514 2.9 15.20 1585.57 15145.9 14411 4.2 185 4.05 12297.75 10922.05 877 0.5 2085 5.19 19515 5.4 18025 5.05 22089 44.27 21141 44.7 20194 45.25 19215 45.8 17847 45.9 19 45.00 1452 44.0 11702 40.8 141 27.85 140 28.28 142 28.8 12780 28.48 11882 28.1 1085 27.4 15875 7.07 15208 7.00 14542.92 18.8 104.57 12225.2 111.07 980 5.8 21920 41.77 21100 42.42 2015 42.58 19170 42.7 1782 42.25 1285 41.45 2812 55.1 22812 55.50 2181 55.8 20799 55.24 1959 54.8 188 54.47 1749 54.10 14791 5.74 2922 55.71 281 5.57 284 5.77 2550 5.98 274 5.4 2171 55.28 1750 74.15 0417 7.99 29084 7.84 2772 7. 2092 7.15 24451 72. 222 72.14 19721 71. 19708 42.05 19154 42.78 1801 4.5 17925 4.7 17224 4.89 152 44.0 15528 4.58 14408 42.89 22522 1.11 21909 1.49 2129 1.5 20501 1.54 197 1.4 19025 1. 18148 1.02 17240 0.8 2952.07 2872 4.18 27902 5.29 2888 5.4 258 5.84 24784.04 2292 5.7 211 4.7 78 91.7 284 92.24 1858 92.47 0752 92.1 2945 92.15 2858 91.99 2722 91.54 2580 91.01 941 84.10 809 85.58 720 87.0 5851 87.5 4448 87.80 04 88.0 105 87.17 28817 85.80 See additional HDBI-0 and HDBI-0 ratings at bottom of page 10. 21" SP 22" SP 2" SP 24" SP 25" SP 2" SP 27" SP 28" SP 4950 24.2 41 2.74 4282 2.1 444 20.10 2845 17.59 742.48 924 5.0 42 4.7 51 0.15 427 2.9 9901 48. 92 47.47 854 4.1 888 40.20 590 5.18 577 29.8 072 29.04 5522 28.29 985 44.51 9108 4.5 828 42.44 1154 59.5 12144 58.07 11044 5.58 11
HDBI-120 Belt Drive Rating Tables WHEEL OUTLET O.D. INLET O.D. Ratings at 70 F.,.075 Density, Sea Level Dia. - 12.25" Size - 9.75" x 1.75" Size - 1.25" Area -.895 Sq. Ft. Area -.92 Sq. Ft. All wheels are HDBI Type Class II = light face above Class III SEE PAGE 24 FOR MAX. WHEEL RPM AND WR². Class III = bold face VOLUME O.V. 0" SP ¼" SP ½" SP ¾" SP 1" SP 1½" SP 2" SP CFM FPM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 00 70 0 0.01 81 0.04 1011 0.08 117 0.12 124 0.1 1598 0.2 750 88 75 0.02 948 0.0 1105 0.10 1247 0.14 180 0.19 125 0.29 1852 0.41 900 1005 904 0.04 107 0.09 1214 0.1 141 0.18 140 0.2 181 0.4 1887 0.47 1050 117 1055 0.07 1204 0.12 12 0.17 1447 0.22 155 0.28 1757 0.40 194 0.5 1200 141 1205 0.10 19 0.1 145 0.21 152 0.28 12 0.4 1848 0.47 2022 0.1 150 1508 15 0.15 1477 0.21 1584 0.27 18 0.4 177 0.41 1949 0.55 2112 0.70 1500 17 1507 0.20 117 0.27 171 0.4 1809 0.41 189 0.49 2058 0.4 2210 0.81 150 184 157 0.27 1758 0.4 1851 0.42 198 0.50 2019 0.58 217 0.75 21 0.92 1800 2011 1808 0.5 1901 0.42 1988 0.51 209 0.59 214 0.8 2292 0.8 2428 1.05 1950 2178 1959 0.44 2045 0.52 212 0.1 220 0.71 227 0.80 2414 0.99 2544 1.19 2100 24 2109 0.55 2190 0.4 22 0.7 29 0.8 2408 0.9 2540 1.14 24 1.5 2250 251 220 0.7 2 0.77 2408 0.87 247 0.98 2542 1.08 28 1.0 278 1.5 2400 281 2411 0.82 2482 0.92 2550 1.0 215 1.14 278 1.25 2798 1.48 2912 1.72 2550 2849 251 0.98 229 1.09 29 1.21 2755 1.2 2815 1.44 290 1.8 09 1.9 2700 01 2712 1.17 277 1.28 287 1.40 289 1.52 2954 1.5 04 1.90 19 2.17 2850 184 28 1.7 292 1.49 2981 1.2 08 1.75 09 1.88 199 2.15 00 2.42 000 51 01 1.0 071 1.7 12 1.8 181 1.99 2 2.1 5 2.41 4 2.70 150 519 14 1.85 219 1.99 272 2.12 24 2.2 75 2.41 47 2.70 57.00 00 8 15 2.1 7 2.27 418 2.41 48 2.5 517 2.71 11.01 702.2 450 854 45 2.4 515 2.58 54 2.7 12 2.88 59.04 750.5 88.8 00 4022 1 2.7 4 2.92 711.07 757.2 802.9 890.72 97 4.0 750 4189 77.12 81.28 858.45 90.1 94.78 401 4.12 4114 4.47 900 457 917.51 92.8 4005.85 4048 4.02 4090 4.19 417 4.55 425 4.90 VOLUME O.V. 2½" SP " SP 4" SP 5" SP " SP 7" SP 8" SP CFM FPM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 1050 117 2125 0.8 229 0.8 217 1.1 2915 1.52 1200 141 2188 0.7 247 0.92 248 1.2 290 1.4 19 2.04 448 2.48 150 1508 22 0.8 2414 1.0 29 1.9 292 1.77 21 2.19 457 2. 88.10 1500 17 255 0.98 2494 1.15 2759 1.5 011 1.9 251 2. 481 2.81 70.29 150 184 245 1.10 2584 1.29 284 1.8 072 2.10 00 2.54 520.01 72.50 1800 2011 2557 1.24 282 1.44 2919 1.85 145 2.29 2 2.75 572.2 774.74 1950 2178 27 1.40 278 1.1 012 2.04 227 2.50 44 2.98 4.47 828.99 2100 24 2782 1.57 2895 1.79 111 2.25 17 2.72 515.22 70.74 892 4.27 2250 251 2899 1.7 008 1.99 21 2.47 41 2.97 0.49 78 4.02 95 4.58 2400 281 020 1.9 125 2.21 24 2.71 514.2 97.77 87 4. 4045 4.90 2550 2849 144 2.19 244 2.44 47 2.97 20.52 79 4.08 9 4. 411 5.25 2700 01 29 2.4 7 2.70 552.2 729.8 899 4.41 40 5.01 422 5. 2850 184 97 2.70 491 2.98 71.5 842 4.15 400 4.7 415 5.9 420.02 000 51 527 2.99 17.28 791.89 957 4.51 411 5.14 4271 5.78 4421.44 150 519 57.0 745.1 914 4.24 4075 4.88 420 5.54 479.21 4525.89 00 8 790.4 875.9 409 4.1 4195 5.28 445 5.9 4491. 42 7. 450 854 92 4.01 400 4.4 415 5.02 417 5.71 44.42 405 7.1 474 7.8 00 4022 4058 4.40 418 4.74 429 5.45 4441.1 458.89 4721 7.4 485 8.9 750 4189 4194 4.82 4272 5.18 4422 5.91 45.5 4705 7.40 4840 8.17 4971 8.95 900 457 40 5.27 440 5.4 4552.9 49 7.1 4828 7.94 490 8.7 4050 4524 448 5.75 4542.14 484.91 4821 7.71 495 8.51 4200 492 40.27 478. 4817 7.4 4950 8.28 VOLUME O.V. 9" SP 10" SP 11" SP 12" SP 1" SP 14" SP CFM FPM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 1800 2011 971 4.2 41 4.81 449 5.8 450 5.97 4707.59 4880 7.22 1950 2178 4017 4.54 4201 5.10 480 5.8 4555.28 4727.90 4894 7.54 2100 24 407 4.8 4250 5.41 442.00 4591.2 4757 7.25 4919 7.90 2250 251 419 5.15 408 5.74 4475.5 48.98 4798 7.2 4954 8.29 2400 281 4212 5.49 47.10 45.7 49 7.7 4848 8.0 2550 2849 4292 5.8 4450.49 405 7.1 4757 7.79 490 8.4 2700 01 479.25 451.90 481 7.5 4828 8.24 4972 8.9 2850 184 4471.7 418 7.4 47 8.02 4905 8.71 000 51 457 7.12 4710 7.80 4850 8.50 150 519 47 7.58 480 8.29 4942 9.01 00 8 4770 8.08 490 8.81 450 854 4877 8.0 Performance certified is for installation type B - Free inlet, Ducted Outlet. Performance ratings do not include the effects of appurtenances (accessories). Power rating (BHP) does not include transmission losses. 12
WHEEL Dia. - 1.50" HDBI-10 OUTLET O.D. Size - 10.8" x 15.19" Area - 1.05 Sq. Ft. I.D. SEE PAGE 24 FOR MAX. WHEEL RPM & WR 2. INLET O.D. Size - 14." Area - 1.14 Sq.Ft. I.D. BELT DRIVE RATING TABLES Ratings at 70 F.,.075 Density, Sea Level All wheels are HDBI type Class II = light face above Class III Class III = bold face Class IV = italic face below Class III 900 857 72.0 87.08 1027.1 117.18 1290.24 1500.7 170.51 1892.7 1100 1047 821.0 98.11 1129.17 1257.2 172.0 1579.44 175.0 1921.7 100 128 971.10 1111.1 1242.22 15.29 145.7 11.52 185.9 1990.87 1500 1428 1120.15 1241.22 11.29 148.7 155.45 1751.2 1918.81 2071 1.00 1700 119 129.21 178.29 1484.7 158.4 177.55 1847.7 2007.9 215 1.14 1900 1809 1419.0 1518.9 111.48 1705.57 1792.7 1952.87 2102 1.08 224 1.0 2100 2000 158.40 158.50 1741.0 1829.70 1911.81 204 1.02 2202 1.25 29 1.49 200 2190 1717.5 1801.4 1877.74 195.85 204.97 2179 1.20 21 1.44 24 1.9 2500 280 18.8 1944.79 201.91 2084 1.0 2159 1.15 2297 1.40 242 1. 254 1.9 2700 2571 201.8 2088.98 2155 1.10 2219 1.2 228 1. 2419 1. 2541 1.91 258 2.19 2900 271 215 1.0 222 1.20 229 1. 25 1.4 2415 1.0 254 1.89 20 2.18 2772 2.48 100 2952 214 1.0 278 1.44 248 1.58 2495 1.72 2550 1.87 29 2.17 2782 2.48 2889 2.80 00 142 244 1.57 252 1.72 2580 1.87 25 2.02 287 2.17 279 2.49 290 2.82 009.15 500 21 1.87 29 2.0 272 2.19 2775 2.5 282 2.51 2925 2.84 01.19 12.54 700 52 272 2.21 281 2.8 287 2.54 2917 2.71 295 2.89 057.2 2158.59 255.9 900 714 2912 2.59 292 2.7 012 2.94 059.12 105.0 194. 28 4.04 81 4.42 4100 904 01.01 109.19 15.8 202.5 24.75 2 4.1 415 4.52 507 4.92 400 4095 210.47 257. 01.8 45 4.05 88 4.25 470 4.5 549 5.05 5 5.47 4500 4285 0.98 404 4.18 447 4.8 489 4.59 50 4.79 09 5.21 8 5. 74.0 4700 447 509 4.5 551 4.74 59 4.95 5.17 7 5.8 749 5.82 82.25 895.9 1500 1428 2211 1.20 241 1. 2708 2.10 294 2.0 15.12 8.5 50 4.21 741 4.79 1700 119 2292 1. 2540 1.82 270 2.1 2975 2.8 19.8 97.95 588 4.54 79 5.15 1900 1809 275 1.54 220 2.0 289 2.54 09.08 22.5 42 4.25 17 4.88 798 5.52 2100 2000 24 1.7 270 2.25 2920 2.80 118.7 01.9 472 4.58 4 5.22 827 5.90 200 2190 252 1.95 2789 2.50 002.08 198.8 80 4.0 550 4.95 711 5.1 8.29 2500 280 259 2.20 288 2.78 08.8 281 4.01 41 4.7 0 5.4 790.0 941.75 2700 2571 277 2.48 2979.08 178.71 4 4.7 54 5.0 711 5.7 870.49 4021 7.2 2900 271 2879 2.78 077.41 274 4.07 454 4.7 27 5.47 79.21 951.9 4101 7.74 100 2952 299.12 18.78 70 4.4 549 5.18 71 5.92 877.8 404 7.47 418 8.27 00 142 108.49 297 4.18 471 4.89 45 5.4 811.41 9 7.20 4117 8.01 425 8.84 500 227.89 410 4.2 581 5. 74.1 90.9 400 7.75 4207 8.59 449 9.44 700 52 48 4. 525 5.09 92 5.87 849. 4004 7.49 415 8.4 401 9.21 449 10.09 900 714 471 4.81 41 5.0 80.42 959 7.24 4104 8.08 425 8.97 49 9.87 45 10.79 4100 904 595 5. 71.1 920 7.00 4071 7.8 4214 8.74 451 9. 449 10.57 429 11.52 400 4095 721 5.89 88.7 40 7. 4185 8.5 425 9.44 4459 10. 4591 11.1 472 12.29 4500 4285 847.50 400 7.40 4155 8.1 4299 9.24 448 10.18 4570 11.14 49 12.11 482 1.11 4700 447 975 7.15 410 8.09 427 9.0 4415 9.99 4552 10.97 482 11.9 480 12.9 492 1.98 4900 4 4104 7.8 4255 8.82 498 9.80 454 10.80 17 11.81 4795 12.8 4918 1.87 5100 4857 424 8.1 482 9.1 4522 10. 454 11. 478 12.70 4909 1.7 1900 1809 970.18 414.85 4292 7.54 4444 8.25 4590 8.97 472 9.70 2100 2000 999.59 41 7.0 420 8.02 4472 8.7 419 9.51 470 10.28 4898 11.0 200 2190 4027 7.01 4192 7.75 449 8.51 4501 9.28 447 10.0 4789 10.8 492 11.7 2500 280 408 7.47 4224 8.22 478 9.00 450 9.81 47 10. 4818 11.4 4955 12.0 2700 2571 414 7.99 402 8.7 445 9.55 45 10. 4705 11.20 4847 12.07 4984 12.95 2900 271 4244 8.5 481 9. 451 10.15 441 10.99 474 11.84 488 12.70 100 2952 425 9.09 441 9.9 459 10.78 4719 11.5 4842 12.5 491 1.42 00 142 4407 9.70 454 10.5 47 11.44 4799 12.4 4921 1.25 500 4490 10. 425 11.2 4755 12.14 4880 1.07 700 52 4574 11.00 4708 11.9 487 12.87 492 1.8 900 714 45 11.72 4792 12. 4921 1.4 4100 904 4759 12.48 4885 1.4 Performance certified is for installation type B - Free inlet, Ducted Outlet. Performance ratings do not include the effects of appurtenances (accessories). Power rating (BHP) does not include transmission losses. 1
WHEEL Dia. - 15.00" HDBI-150 OUTLET O.D. Size - 11.8" x 1.75" Area - 1.28 Sq. Ft. I.D. SEE PAGE 24 FOR MAX. WHEEL RPM & WR 2. INLET O.D. Size - 1.1" Area - 1.9 Sq.Ft. I.D. BELT DRIVE RATING TABLES Ratings at 70 F.,.075 Density, Sea Level All wheels are HDBI type Class II = light face above Class III Class III = bold face Class IV = italic face below Class III 1750 17 959.14 102.21 115.29 1258.7 141.45 1502. 151.8 1789 1.04 2000 152 109.20 1188.29 1278.7 14.4 1444.5 1585.75 1728.9 1858 1.18 2250 1757 12.29 11.8 194.48 1475.58 1550.8 18.89 1809 1.12 19 1.5 2500 195 170.40 144.50 1514.1 1589.72 159 8 1789 1.0 1907 1.0 2017 1.55 2750 2148 1507.5 157.4 140.7 1705.88 1772 1.00 1895 1.25 2009 1.50 2114 1.77 000 24 144.8 1708.81 178.9 1824 1.07 1887 1.20 2005 1.4 2114 1.74 221 2.02 250 259 1781.87 1840 1.00 189 1.14 1949 1.28 200 1.42 2117 1.71 2221 2.00 220 2.0 500 274 1918 1.09 197 1.2 202 1.8 207 1.5 2124 1.8 220 1.98 21 2.0 2425 2.1 750 2929 2055 1. 2107 1.49 215 1.5 2204 1.81 2249 1.97 24 2.29 244 2.2 254 2.9 4000 125 2192 1.2 2241 1.78 2288 1.95 2 2.12 27 2.29 24 2.4 2557 2.99 245.5 4250 20 229 1.94 275 2.12 2419 2.29 242 2.47 2504 2. 258.02 272.9 2757.77 4500 515 24 2.1 2510 2.49 2552 2.8 259 2.87 22.0 2708.45 2788.84 2871 4.2 4750 710 20 2.71 244 2.91 285.10 2724.0 271.50 284.91 290 4. 298 4.74 5000 90 2740.1 2779.7 2818.58 2855.79 2891 4.00 292 4.42 029 4.8 10 5.29 5250 4101 2877. 2915.88 2951 4.09 2987 4.1 022 4.5 089 4.98 154 5.44 220 5.89 5500 429 014 4.21 050 4.44 085 4. 119 4.89 15 5.12 218 5.59 281.0 41.54 5750 4492 151 4.81 185 5.05 219 5.28 252 5.52 284 5.7 47.25 408.74 4 7.24 000 487 288 5.47 21 5.71 5 5.9 85.21 41.4 477.97 55 7.48 592 8.00 250 4882 425.18 457.4 488.9 518.95 548 7.21 07 7.74 4 8.27 719 8.81 500 5078 52.95 59 7.21 2 7.48 52 7.75 81 8.02 78 8.57 79 9.12 84 9.8 1750 17 1917 1.2 2175 1.77 240 2. 2000 152 1982 1.42 2210 1.92 248 2.51 244.14 2250 1757 205 1.0 227 2.1 247 2.70 279.5 288 4.04 045 4.7 2500 195 212 1.81 242 2. 25 2.9 2714.58 290 4.0 079 5.05 245 5.8 402. 2750 2148 221 2.05 2418 2. 20.25 2782.90 2944 4.58 115 5.4 280.15 47.99 000 24 210 2.1 2499 2.9 280.57 2851 4.25 01 4.9 14 5.70 15.49 472 7. 250 259 2412 2.1 2582.25 270.9 2924 4. 08 5.7 2.14 74.9 509 7.75 500 274 251 2.94 282.2 2841 4.2 004 5.0 155 5.81 0.1 44 7.44 577 8.28 750 2929 221.1 2784 4.02 294 4.75 085 5.52 25.1 7 7.12 514 7.97 47 8.85 4000 125 2728.71 2888 4.45 04 5.22 171.01 15.84 455 7.9 588 8.55 717 9.45 4250 20 288 4.15 299 4.9 1 5.7 270.5 97 7.41 5 8.29 7 9.19 792 10.11 4500 515 2950 4. 099 5.45 240.29 72 7.15 49 8.0 18 8.9 748 9.87 872 10.8 4750 710 0 5.1 208.01 45.89 475 7.78 597 8.70 71 9. 829 10.59 95 11.58 5000 90 177 5.7 19.2 452 7.5 579 8.4 99 9.41 814 10.8 92 11.7 404 12.8 5250 4101 29.5 41 7.28 50 8.22 84 9.19 80 10.18 91 11.18 4024 12.21 4127 1.24 5500 429 409 7.02 544 7.99 70 8.97 791 9.97 907 10.99 4018 12.04 4125 1.09 4228 14.17 5750 4492 527 7.74 58 8.75 782 9.77 899 10.80 401 11.8 412 12.94 4228 14.0 429 15.14 000 487 48 8.52 774 9.5 894 10.2 4009 11.9 4120 12.79 4228 1.90 41 15.0 441 1.18 250 4882 77 9.5 890 10.44 4008 11.5 4121 12.5 4229 1.77 44 14.92 44 1.09 455 17.27 500 5078 899 10.24 4007 11.7 412 12.51 42 1. 49 14.82 4441 1.00 4542 17.20 49 18.42 000 24 21 8.25 7 9.17 899 10.11 401 11.07 250 259 5 8. 798 9.1 94 10.58 40 11.57 4192 12.58 415 1.2 444 14.8 500 274 705 9.15 8 10.0 970 11.0 4101 12.08 4227 1.1 450 14.19 449 15.28 4584 1.9 750 2929 774 9.75 89 10.7 401 11.0 41 12.1 42 1.9 485 14.78 4504 15.90 419 17.04 4000 125 84 10.9 95 11.4 4081 12.0 4194 1.29 40 14.29 4420 15.9 459 1.5 454 17.70 4250 20 914 11.05 405 12.04 4151 1.04 42 14.0 471 15.10 447 1.15 4579 17.21 490 18.8 4500 515 991 11.80 4105 12.78 4221 1.82 42 14.87 4440 15.94 4545 17.02 447 18.12 4750 710 4071 12.59 4184 1.1 4294 14.4 440 15.72 4510 1.82 415 17.94 5000 90 4151 1.4 424 14.48 47 15.55 4478 1.4 4581 17.74 485 18.89 5250 4101 42 14.1 445 15.40 445 1.51 4558 17. 459 18.7 5500 429 42 15.25 4427 1.7 454 17.51 48 18.7 5750 4492 442 1.27 4521 17.40 41 18.5 000 484 4528 17. 421 18.51 4712 19.70 Performance certified is for installation type B - Free inlet, Ducted Outlet. Performance ratings do not include the effects of appurtenances (accessories). Power rating (BHP) does not include transmission losses. 14
WHEEL Dia. - 1.50" HDBI-10 OUTLET O.D. Size - 12.50" x 18.8" Area - 1.54 Sq. Ft. I.D. SEE PAGE 24 FOR MAX. WHEEL RPM & WR 2. INLET O.D. Size - 18.00" Area - 1.7 Sq.Ft. I.D. BELT DRIVE RATING TABLES Ratings at 70 F.,.075 Density, Sea Level All wheels are HDBI type Class II = light face above Class III Class III = bold face Class IV = italic face below Class III 2100 1 85.1 1054.4 1214.54 11.7 1498.99 122 1.24 1740 1.51 1975 2.14 2400 1558 988.24 1155.44 10. 145.90 15 1.15 185 1.42 1798 1.70 2007 2.1 2700 175 1112.4 1259.57 1401.81 152 1.07 19 1.4 1755 1.2 181 1.92 201 2.55 000 1948 125.47 17.72 1500.99 119 1.2 172 1.55 1828 1.85 192 2.17 2124 2.8 00 2142 159.2 1481.90 101 1.19 1714 1.49 1818 1.80 191 2.12 2005 2.45 2192.15 00 27 1482.81 159 1.11 1705 1.42 1812 1.74 1912 2.07 2005 2.41 2091 2.77 224.50 900 252 10 1.0 1711 1.5 1810 1.9 191 2.0 2008 2.8 2098 2.75 218.12 28.89 4200 2727 1729 1.28 1828 1. 1918 1.99 201 2. 2107 2.7 2194.12 227.51 2428 4.2 4500 2922 185 1.58 194 1.95 201 2.4 2120 2.7 2208.12 2291.5 271.94 2519 4.80 4800 11 197 1.91 204 2.1 2145 2.72 2225.14 210.5 291.98 247 4.42 21 5.2 5100 11 2100 2.29 218 2.72 220.15 22.59 2414 4.04 2492 4.49 25 4.94 2707 5.88 5400 50 222 2.72 202.17 27. 2445 4.09 2519 4.5 2595 5.0 27 5.51 280.49 5700 701 247.20 2422.7 2492 4.15 2559 4.4 225 5.14 298 5.4 278.14 2900 7.1 000 89 2471.7 2542 4.2 209 4.7 27 5.25 275 5.77 280.29 2871.81 000 7.88 00 4090 2594 4.2 22 4.84 2727 5.7 2788 5.91 2848.45 2909 7.00 2975 7.55 101 8. 00 4285 2718 4.97 278 5.51 2845.07 2904. 292 7.19 017 7.77 080 8.4 20 9.50 900 4480 2841 5.8 290.25 29.82 021 7.41 07 8.00 10 8.0 18 9.20 0 10.40 7200 475 295.45 024 7.04 082 7.4 17 8.25 191 8.87 24 9.19 294 10.12 410 11.7 7500 4870 088 7.29 14 7.91 201 8.5 255 9.17 07 9.80 57 10.45 40 11.10 514 12.41 2100 1 218 2.81 2400 1558 2214.02 2401.78 2700 175 224.25 24 4.04 205 4.87 275 5.7 000 1948 201.55 245 4.1 27 5.17 2797.08 2947 7.02 090 7.99 00 2142 2.89 252 4.8 271 5.50 2828.4 2979 7.41 121 8.42 257 9.45 8 10.52 00 27 2429 4.28 258 5.10 27 5.9 2870.85 011 7.81 15 8.8 288 9.9 418 11.04 900 252 2501 4.71 251 5.55 2795.44 292 7.7 01 8. 185 9.1 20 10.42 449 11.5 4200 2727 2574 5.17 2722.0 280.97 2995 7.9 12 8.9 245 9.95 1 10.99 481 12.11 4500 2922 25 5.8 2795.0 292 7.5 00 8.54 18 9.5 07 10.2 42 11.71 54 12.81 4800 11 274.24 2870 7.19 004 8.19 12 9.21 252 10.25 71 11.4 48 12.4 59 1.1 5100 11 288.85 290 7.84 078 8.8 204 9.9 24 11.01 48 12.12 549 1.2 59 14.45 5400 50 291 7.51 052 8.54 15 9.0 278 10.9 9 11.82 509 12.97 18 14.1 72 15. 5700 701 02 8.21 144 9.29 25 10.40 1 11.52 470 12.8 582 1.87 89 15.08 79 1.1 000 89 122 8.98 28 10.10 47 11.24 452 12.41 552 1.0 55 14.82 72 1.07 85 17.5 00 4090 219 9.80 10.9 441 12.15 54 1. 42 14.59 77 15.84 85 17.12 97 18.44 00 4285 18 10.8 429 11.89 55 1.12 14.7 7 15.4 827 1.9 917 18.24 4011 19.59 900 4480 419 11. 525 12.87 0 14.15 70 15.45 82 1.7 918 18.09 4007 19.45 409 20.82 7200 475 520 12.4 25 1.9 72 15.25 824 1.59 919 17.94 4010 19.2 4098 20.71 418 22.1 7500 4870 22 1.72 725 15.0 824 1.41 920 17.79 401 19.20 410 20.2 4190 22.05 4274 2.51 00 27 542 12.17 1 1. 900 252 57 12.7 9 1.9 808 15.15 919 1.40 4027 17.8 4200 2727 05 1.1 724 14.55 89 15.81 951 17.09 4059 18.40 414 19.74 42 21.09 4500 2922 40 1.94 75 15.18 871 1.47 982 17.80 4090 19.14 4195 20.51 4800 11 702 14.77 804 15.9 904 17.17 4014 18.52 4122 19.90 4227 21.1 5100 11 74 15.5 8 1.88 95 18.1 401 19.9 4154 20.8 4259 22.12 5400 50 828 1.58 929 17.84 4027 19.1 412 20.44 4215 21.7 5700 701 892 17.55 99 18.85 4090 20.18 4185 21.5 4277 22.89 000 89 94 18. 4059 19.94 4154 21.28 4248 22.7 00 4090 40 19.77 411 21.12 422 22.48 00 4285 4109 20.97 420 22. 900 4480 4182 22.22 427 2.5 Performance certified is for installation type B - Free inlet, Ducted Outlet. Performance ratings do not include the effects of appurtenances (accessories). Power rating (BHP) does not include transmission losses. 15
WHEEL Dia. - 18.25" HDBI-180 OUTLET O.D. Size - 1.88" x 20.8" Area - 1.90 Sq. Ft. I.D. SEE PAGE 24 FOR MAX. WHEEL RPM & WR 2. INLET O.D. Size - 20.00" Area - 2.1 Sq.Ft. I.D. BELT DRIVE RATING TABLES Ratings at 70 F.,.075 Density, Sea Level All wheels are HDBI type Class II = light face above Class III Class III = bold face Class IV = italic face below Class III 2800 147 852.28 1010.54 1150.82 1272 1.12 192 1.4 1502 1.82 105 2.18 1804.00 200 184 974.42 1112.70 124 1.02 15 1.5 14 1.70 158 2.09 17 2.50 1848. 00 1894 1095.0 1217.91 19 1.27 1447 1.2 1545 1.99 140 2.9 175 2.8 1910.74 4000 2105 1217.82 128 1.1 149 1.55 1541 1.95 15 2.5 1722 2.7 180.20 1975 4.19 4400 215 19 1.09 1441 1.47 1540 1.88 18 2.2 1728 2.7 1812.20 1890.5 204 4.5 4800 252 141 1.42 155 1.8 144 2.2 177 2.7 182.22 1904.9 1980 4.17 2120 5.17 5200 27 1582 1.80 171 2.25 1751 2.70 188.21 1920.7 1998 4.25 2072 4.7 2209 5.81 500 2947 1704 2.25 1787 2.7 18.22 1941.74 2020 4.29 2094 4.8 21 5.42 200.5 000 157 182 2.77 190.28 1975.80 2045 4.4 2121 4.9 219 5.5 221.14 292 7.2 400 8 1947. 2021.90 2089 4.4 215 5.02 2224 5. 2294.27 20.91 2485 8.19 800 578 209 4.0 218 4.0 220 5.19 225 5.79 228.42 295 7.08 2459 7.7 2580 9.1 7200 789 2191 4.78 225 5.9 218.01 277.4 244 7.28 2498 7.98 250 8.9 278 10.14 700 4000 21 5.2 275.27 244.92 2490 7.58 2545 8.25 202 8.9 22 9.70 2777 11.22 8000 4210 244.5 2494 7.2 2550 7.92 204 8.2 257 9.2 2707 10.0 27 10.81 2877 12.9 8400 4421 255 7.59 21 8.0 27 9.02 2719 9.75 279 10.49 2818 11.2 2870 12.01 2978 1. 8800 41 278 8.7 272 9.47 2784 10.22 284 10.99 288 11.75 290 12.5 2975 1.1 080 15.0 9200 4842 2800 9.98 2851 10.75 2901 11.54 2950 12. 2997 1.1 042 1.94 08 14.75 184 1.50 NOTE: See pages 27, 29 or 0 for minimum 200 184 2022 4.2 2192 5.28 247. 00 1894 209 4.8 222 5.9 278.8 252 8.01 259 9.2 4000 2105 211 5.20 2275.2 2410 7.1 2554 8.55 290 9.8 2819 11.15 2942 12.51 059 1.91 4400 215 219 5.75 27.8 2470 8.00 2594 9.17 2722 10.45 2850 11.82 297 1.24 090 14.9 4800 252 22.2 2402 7.5 252 8.74 255 9.97 2772 11.2 2882 12.52 004 1.99 121 15.50 5200 27 29.94 2472 8.20 2597 9.51 2717 10.8 28 12.15 294 1.51 048 14.89 152 1. 500 2947 2422 7.8 2544 8.9 28 10.0 278 11.71 289 1.1 005 14.55 109 15.99 209 17.4 000 157 2512 8.5 22 9.77 279 11.15 2854 12.2 29 14.1 07 15.5 171 17.1 271 18.9 400 8 20 9.4 271 10.7 281 12.09 292 1.59 04 15.15 1 1.75 25 18.9 19.99 800 578 295 10.47 280 11.84 2905 1.2 001 14.5 10 1.25 207 17.91 05 19.0 99 21. 7200 789 2789 11.57 2895 1.00 2995 14.45 090 15.9 180 17.4 279 19.1 7 20.88 49 22.7 700 4000 2884 12.7 2988 14.25 08 15.7 179 17.1 29 18.87 55 20.4 448 22.24 541 24.08 8000 4210 2982 14.01 082 15.0 178 17.18 270 18.78 58 20.41 44 22.05 525 2.7 1 25.57 8400 4421 081 15.4 177 17.05 272 18.9 20. 449 22.05 5 2.7 1 25.49 91 27.24 8800 41 180 1.77 275 18.55 7 20.1 45 22.04 541 2.79 2 25.57 70 27. 780 29.17 9200 4842 281 18.1 74 20.1 4 22.0 550 2.84 4 25.5 715 27.49 794 29.4 870 1.22 4400 215 202 1.19 10 17.71 4800 252 2 17.05 41 18. 445 20.24 54 21.89 44 2.57 5200 27 24 17.9 72 19.57 47 21.24 577 22.94 74 24.7 79 2.44 82 28.2 500 2947 0 18.9 40 20.54 507 22.2 08 24.02 70 25.81 800 27. 000 157 7 20.25 459 21.84 548 2.45 9 25.1 77 2.98 82 28.85 400 8 428 21.2 520 2.2 09 24.9 9 2.2 780 28.4 8 0.11 800 578 491 2.05 58 24.7 71 2.49 757 28.25 840 0.02 7200 789 559 24.48 4 2. 74 28.1 819 29.95 700 4000 0 25.9 71 27.8 799 29.79 882 1.7 8000 4210 701 27.51 787 29.47 870 1.47 8400 4421 774 29.14 859 1.17 8800 41 855 1.01 Performance certified is for installation type B - Free inlet, Ducted Outlet. Performance ratings do not include the effects of appurtenances (accessories). Power rating (BHP) does not include transmission losses. 1
WHEEL Dia. - 20.00" HDBI-200 OUTLET O.D. Size - 15.25" x 22.8" Area - 2.0 Sq. Ft. I.D. SEE PAGE 24 FOR MAX. WHEEL RPM & WR 2. INLET O.D. Size -.22" Area - 2.58 Sq.Ft. I.D. BELT DRIVE RATING TABLES Ratings at 70 F.,.075 Density, Sea Level All wheels are HDBI type Class II = light face above Class III Class III = bold face Class IV = italic face below Class III 4200 182 971.59 1085.95 1199 1.2 1299 1.71 189 2.12 1479 2.5 15.01 1728.97 400 2000 104.78 119 1.17 1274 1.57 170 1.99 1457 2.4 157 2.88 120. 1775 4.5 5000 217 115 1.00 1254 1.42 150 1.8 1442 2.1 152 2.77 104.25 177.75 1829 4.80 5400 247 1249 1.2 140 1.71 1428 2.18 151 2. 1597.1 17.7 1744 4.19 188 5.28 5800 2521 141 1.5 1427 2.05 1507 2.55 1592.0 170.58 1744 4.12 181 4.7 1941 5.81 200 295 14 1.91 1515 2.4 1588 2.9 19.50 1744 4.05 1815 4.2 188 5.20 2008.40 00 289 152 2.0 10 2.85 17.42 174.99 1819 4.57 1888 5.17 1954 5.78 2077 7.0 7000 04 118 2.75 191. 1758.9 1825 4.5 189 5.15 19 5.77 202.41 214 7.72 7400 217 1711.25 1780.8 1844 4.49 1905 5.1 197 5.77 208.4 2100 7.09 2217 8.4 7800 91 180.80 189 4.45 191 5.11 1989 5.78 2052.4 2115 7.14 2175 7.84 2288 9.2 8200 55 189 4.42 1959 5.09 2018 5.79 2074.49 211 7.21 2192 7.92 2251 8.4 21 10.12 800 79 1988 5.09 2048 5.80 2105.5 2159 7.2 2211 8.01 2270 8.7 227 9.51 245 11.05 9000 91 2081 5.84 218.58 219 7.4 2245 8.10 2295 8.89 249 9.7 2405 10.45 2510 12.05 9400 408 217.5 2229 7.4 2281 8.21 21 9.01 280 9.8 2428 10.5 248 11.4 258 1.12 9800 420 22 7.54 219 8.4 270 9.1 2418 10.00 245 10.84 2511 11.9 251 12.54 22 14.2 10200 444 258 8.50 2409 9.4 2458 10.19 2505 11.05 2551 11.9 2595 12.81 241 1.70 279 15.48 1000 408 2451 9.54 2500 10.41 2547 11.29 259 12.19 27 1.09 280 14.01 2722 14.94 2817 1.78 11000 4782 254 10. 2591 11.5 27 12.48 281 1.41 2724 14.4 275 15.29 280 1.25 2895 18.1 11400 495 2 11.87 282 12.80 272 1.75 279 14.71 2811 15.8 2851 1.5 2891 17.4 2974 19. NOTE: See pages 27, 29 or 0 for minimum motor frame sizes regardless of BHP. 4200 182 1874 4.99 2021.14 21 7.9 2295 8.9 2420 10.05 400 2000 1921 5.4 205.5 2187 7.81 219 9.1 244 10.5 250 12.01 272 1.51 5000 217 198 5.91 2099 7.09 2221 8.1 24 9.4 247 11.09 2584 12.59 29 14.1 280 15.72 5400 247 2019.44 214 7.5 227 8.9 281 10.25 2490 11. 208 1.18 2719 14.77 282 1.41 5800 2521 207 7.02 219 8.27 215 9.59 2427 10.9 25 12.7 24 1.82 274 15.4 2850 17.12 200 295 2128 7.4 2250 8.95 24 10.29 2474 11.71 2580 1.18 280 14.8 277 1.21 2874 17.84 00 289 2189 8.2 204 9.8 2417 11.08 252 12.51 227 14.0 2727 15.58 282 17.17 2914 18.79 7000 04 2257 9.07 20 10.4 2471 11.92 2577 1.41 27 14.9 2774 1.5 289 18.17 290 19.85 7400 217 225 9.87 2427 11.1 252 12.81 21 14. 2729 15.94 2824 17.55 2917 19.2 007 20.9 7800 91 295 10.7 2495 12.2 2588 1.77 285 15. 2784 17.00 2877 18.7 297 20. 055 22.12 8200 55 245 11.5 25 1.21 25 14.80 2744 1.4 288 18.12 291 19.84 020 21.59 10 2.7 800 79 257 12. 2 14.25 2724 15.90 2811 17.58 2894 19.0 298 21.08 074 22.89 159 24.7 9000 91 209 1.8 2704 15. 2794 17.07 2879 18.81 291 20.58 041 22.8 129 24.25 21 2.15 9400 408 282 14.81 2775 1.54 284 18.1 2948 20.10 029 21.9 107 2.78 184 25.8 28 27. 9800 420 2757 1.01 2847 17.79 294 19.2 018 21.47 098 2. 174 25.27 248 27.21 2 29.19 10200 444 282 17.29 2920 19.1 00 21.01 088 22.92 17 24.8 24 2.8 1 28.82 87 0.85 1000 408 2908 18.5 2994 20.54 078 22.48 159 24.45 27 2.45 12 28.47 84 0.52 454 2.0 11000 4782 2985 20.09 070 22.05 151 24.0 20 2.0 07 28.12 81 0.20 45 2.1 52 4.44 11400 495 02 21.2 145 2.4 225 25.8 0 27.7 79 29.87 452 2.01 52 4.18 591.7 5400 247 2928 18.09 027 19.81 122 21.57 5800 2521 2952 18.84 051 20.1 14 22.42 28 24.27 27 2.15 200 295 297 19.2 074 21.4 19 2.29 21 25.18 50 27.11 47 29.08 521 1.08 00 289 002 20.44 098 22.28 19 24.18 285 2.12 74 28.10 40 0.11 545 2.1 7000 04 048 21.5 1 2.29 217 25.09 09 27.08 98 29.11 484 1.17 58.2 7400 217 095 22.72 179 24.51 20 2. 9 28.17 421 0.14 508 2.25 7800 91 142 2.9 22 25.78 07 27.5 85 29.55 42 1.48 5.4 8200 55 189 25.20 27 27.10 54 29.0 42 0.99 508 2.97 800 79 241 2.59 21 28.48 401 0.47 479 2.48 555 4.51 9000 91 295 28.07 74 0.01 450 1.98 527 4.0 9400 408 49 29.1 427 1.1 50.4 9800 420 404 1.22 482.28 557 5.7 Performance certified is for installation type B - Free inlet, Ducted Outlet. Performance ratings do not include the effects of appurtenances (accessories). Power rating (BHP) does not include transmission losses. 17