Plug-in connectors for power electronics

Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 480 PHOENIX CONTACT

Plug-in connectors for power electronics COMBICON power plug-in connectors provide professionl connection solutions for power electronics. Plug-in PCB connections for numerous possible combintions re vilble from 16 A with the HC series up to 125 A in the PC 35 series. The conductors re connected with the proven screw connection technology (tension sleeve principle) or lterntively using the user-friendly direct plug-in technology. In the high-performnce clsses 41 A (PC 5 series) nd 76 A (PC 16 series) in prticulr, every one of the mny nd vried combintions supported by touch-protected (inverted) versions nd housing feedthroughs is plug-in-cpble nd esy to mintin. In compct pitches nd with 600 V UL pprovls, the high-power plug-in connectors provide connection for ll pplictions with lrge cross sections nywhere on the globl mrket. Generl 482 COMBICON power cross-reference list 484 HC series plug-in connectors up to 16 A/2.5 mm 2, 490 pitch 5.0 or 5.08/7.62 mm Plugs with screw nd spring connection 490 Heders with pin contct 490 Heders with socket contct 498 Verticl plugs for 600 V UL 498 Plugs with screw connection for 600 V UL 502 Heders with pin contct 504 Heders with socket contct 506 ME/ME MAX plug-in connectors/heders, pitch 7.25 mm 508 PC 4 series plug-in connectors up to 20 A/4 mm 2, 512 pitch 7.62 mm Plugs with screw nd crimp connection 512 Heders with pin contct 512 Feed-through heders with pin contct 518 Heders with pin contct for DIN ril mounting 521 Cble housing for PC 4 plugs 521 PC 5 series plug-in connectors up to 41 A/10 mm 2, 521 pitch 7.62 mm Plugs with screw connection 521 Plugs with push-in spring connection 530 Heders with pin contct 536 Heders with socket contct 5 Feed-through heders with pin contct 544 PC 6 series plug-in connectors up to 41 A/6 mm2, 550 pitch 10.16 mm Plugs with screw connection 550 Heders with pin contct 566 Plugs for direct mounting with socket contct 552 PC 16 series plug-in connectors up to 76 A/16 mm 2, 554 pitch 10.16 mm Plugs with screw nd push-in spring connection 554 Heders with pin contct 566 Heders with socket contct 570 Feed-through heders with pin/socket contct 574 PC 35 series plug-in connectors up to 125 A/35 mm 2, 586 pitch 15 mm Plugs with screw connection 586 Heders with pin contct 590 Heders with socket contct 592 Sheet metl cutout dimensions 594 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com PHOENIX CONTACT 481

Generl 125 A vi the PCB? It works! Used in conjunction with high-current PCBs, the plug-in connectors for the power electronics support current crrying cpcity of up to 125 A. Different PCB production technologies re providing new options for device design. The necessry functions nd modules cn now be grouped together on single PCB. In this mnner, expensive dditionl device wiring cn be eliminted. Thermogrphic imge of test ppliction with 125 A PCB production technologies 1 = Multi-lyer technology 2 = Thick copper technology 3 = Wire-writing technology Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 482 PHOENIX CONTACT

Generl Touch-protected PCB inputs nd outputs The inverted plugs nd heders provide the option of touch-protected PCB nd device outputs. Furthermore, they lso enble PCB/PCB nd cble/cble connections to be implemented. This enbles new level of freedom in device design. Extr sfety for optimum performnce All plug-in connectors for the power electronics hve n integrted double steel spring. This covering spring provides dditionl sfety in the event of power nd temperture fluctutions. Contct corrosion is prevented s the double steel spring exerts dditionl pressure on the contct. This ensures the long-term stbility of the contct resistnce. UL pprovls for 600 V high-current pplictions The plug-in connectors for the power electronics offer 600 V UL pprovl for every ppliction, even those with the smllest of dimensions. Plese note tht distinction must be mde here between product nd device pprovls. The COMBICON power flyer lists the pplicble pprovls for products nd pplictions in detil. Current strength [A] 250 225 200 175 150 125 100 75 50 25 0 1 = 2-pos. 2 = 4-pos. 3 = 6-pos. 3 1 2 0 20 60 80 100 Ambient temperture [ C] Plug versions with shield connection/strin relief The shielded plug versions (-STF-SH) in the PC 5, PC 6, PC 16, nd PC 35 product rnges provide professionl connection solution for the brided shield, which prevents electricl interference nd meets EMC requirements. Spde connection for routing the shield PCB-SHIELD contcts the shield directly with the PCB Vibrtion-resistnt connection, thnks to screws integrted in plug flnge Relible connection when exposed to vibrtion: A fixed connection is essentil for pplictions which experience high vibrtions. A fixed connection cn be implemented with: Conventionl screw flnge Automtic interlocking click & lock system New Lock & Relese system, with ejector lever Current crrying cpcity of the plugin connection Derting dt is provided in the ctlog so tht the permitted current crrying cpcity of the plug-in connections cn be determined. The mximum permissible current strength for specific ppliction cn be red depending on the mbient temperture. The number of positions nd the connection cross section of the conductor must lso be tken into considertion. Plese lso refer to the lbortory dt sheets of the corresponding products. For further informtion, see pge 854. Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 483

COMBICON power cross-reference list COMBICON power plug-in connectors with pin contct COMBICON power plug-in connectors with socket contct MSTBA 2,5 HC/...G MSTB 2,5 HC/...GF FKIC 2,5 HC/...-ST GMSTBA 2,5 HC/...-G Type MSTBVA 2,5 HC/...G MSTBV 2,5 HC/...GF FKIC 2,5 HC/...-STF GMSTBVA 2,5 HC/...-G GIC 2,5 HCV/...-ST- Pge 496 Pge 497 Pge 495 Pge 504 Pge 503 497 497 5.0 5.0 Pitch 5.08 5.08 5.08 7.62 7.62 MSTB 2,5 HC...ST 5.0 Pge 490 5.08 MSTB 2,5 HC...STF 5.0 Pge 491 5.08 MSTBT 2,5 HC...ST 5.0 Pge 491 MVSTBR 2,5 HC...ST 5.0 Pge 492 5.08 MVSTBR 2,5 HC...STF 5.0 Pge 493 5.08 MVSTBW 2,5 HC...ST 5.0 Pge 493 5.08 MVSTBW 2,5 HC...STF 5.0 Pge 493 5.08 FKC 2,5 HC/...-ST 5.0 Pge 494 5.08 FKC 2,5 HC/...-STF 5.0 Pge 495 5.08 IC 2,5 HC/...-G Pge 498 5.08 ICV 2,5 HC/...-G Pge 499 5.08 IC 2,5 HC/...-GF Pge 499 5.08 ICV 2,5 HC/...-GF Pge 499 5.08 GMSTB 2,5 HCV/...-ST Pge 502 7.62 GIC(V) 2,5 HC/...-G- Pge 506 7.62 COMBICON power plug-in connectors with pin contct Type GMSTB(V)A 2,5 HC/...G--LR Pge 505 COMBICON power plug-in connectors with socket contct Pitch 7.62 GMSTB 2,5 HCV...ST-LR 7.62 Pge 503 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 484 PHOENIX CONTACT

COMBICON power cross-reference list COMBICON power plug-in connectors with pin contct IPC 35 IPC 35 HC/...- PC 35 HC/...GF- Type IPC 35 HC/...STF HC/...STGF(-SH) STF-SH PC 35 HC/...-GF PCV 35 HC/...GF SH Pge 588 Pge 588 Pge 589 Pge 590 Pge 591 Pge 591 COMBICON power plug-in connectors with socket contct Pitch 15.00 15.00 15.00 15.00 15.00 15.00 PC 35 HC...STF 15.00 Pge 586 PC 35 HC...STF-SH 15.00 Pge 587 IPC 35 HC...GF 15.00 Pge 592 IPCV 35 HC...GF 15.00 Pge 593 DFK-IPC 35 HC/...GF 15.00 Pge 593 DFK-IPCV 35 HC...GF 15.00 Pge 593 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 485

COMBICON power cross-reference list COMBICON power plug-in connectors with pin contct PC 4/...-G DFK-PC 4/..-GF DFK-PC/...-G..- PCVK 4--(PE) IPC 5/..-ST Type PCV 4/...G FS-4,8 UPCV3K 4-G- IPC 5/...-STF-(SH) IPC 5/...-STGCL Pge 516 Pge 518 Pge 519 Pge 521 Pge 526 Pge 527 COMBICON power plug-in connectors with socket contct Pitch 7.62 7.62 7.62 7.62 7.62 7.62 PC 4...ST Pge 512 7.62 PC 4...STF Pge 513 7.62 PCC 4...ST Pge 514 7.62 PC 5/...ST1 Pge 524 7.62 PC 5/...STF1 Pge 525 7.62 PC 5/...-STF-SH1 Pge 525 7.62 PC 5/...STCL1 Pge 525 7.62 SPC 5/..ST Pge 530 7.62 SPC 5/...STF-(SH) Pge 531 7.62 SPC 5/..STCL Pge 531 7.62 TSPC 5/...ST Pge 532 7.62 TSPC 5/...STF Pge 533 7.62 TSPC 5/...STCL Pge 533 7.62 IPC 5/...G(U) Pge 5 7.62 IPC 5/...GF(U) Pge 541 7.62 IPCV 5/...G Pge 542 IPCV 5/...GF 7.62 Pge 543 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 486 PHOENIX CONTACT

COMBICON power cross-reference list IPC 5/...STGF ISPC 5/...STF PC 5/...G(U) PC 5/...GF(U) DFK(V)-PC DFK-PC(V) DFK-PC 5/...ST DFK-PC 5/...STF- IPC 5/...-STGF-SH ISPC 5/..STGCL ISPC 5...STGF PCV 5/..G PCV 5/..GF 5/...G(U) 5/...GF(U)-SH (SH) Pge 527 Pge 534 Pge 535 Pge 536 Pge 537 Pge 544 Pge 546 Pge 548 Pge 549 528 5 539 547 7.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 487

COMBICON power cross-reference list COMBICON power plug-in connectors with pin contct IPC 16/...-STF- IPC 16/...STGF- Type IPC 16/...ST (SH) (SH) ISPC 16/..-ST ISPC 16/...-STF ISPC 16/...-STGF Pge 558 Pge 559 Pge 560 Pge 564 Pge 565 Pge 565 COMBICON power plug-in connectors with socket contct Pitch 10.16 10.16 10.16 10.16 10.16 10.16 PC 6...ST Pge 550 10.16 PC 6...STF-(SH) Pge 551 10.16 PCU 6...STD Pge 552 10.16 PC 16/...ST Pge 554 10.16 PC 16/...STF-(SH) Pge 555 10.16 TPC 16/...-ST Pge 556 10.16 TPC 16/...STF Pge 557 10.16 SPC 16/..ST Pge 562 10.16 SPC 16/...STF-(SH) Pge 563 10.16 IPC 16/..G(U) Pge 570 10.16 IPC 16/..GF(U) Pge 571 10.16 IPCV 16/..G Pge 572 10.16 IPCV 16/..GF Pge 573 10.16 DFK-IPC(V) 16/...G(U) Pge 578 10.16 DFK-IPC(V) 16/...GF(U)-(SH) Pge 581 10.16 DFK-IPC 16/...ST Pge 584 10.16 DFK-IPC 16/...STF-(SH) Pge 585 10.16 1) Only with POWER COMBICON PCB-SHIELD Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 488 PHOENIX CONTACT

COMBICON power cross-reference list PC(V) 6-16/...-G1 PC(V) 6-16/...-G1F DFK-PC(V) 6- DFK-PC(V) 6- DFK-PC 16-STF- PC 6-16/...G1U PC 6-16/...G1FU 16/...G(U) 16/...GF(U)-(SH) DFK-PC 16/...ST (SH) Pge 566 Pge 567 Pge 574 Pge 575 Pge 582 Pge 583 568 569 577 577 10.16 10.16 10.16 10.16 10.16 10.16 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 489

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 484. The designtion HC is printed in red to provide cler identifiction of High current connectors. Corresponding HC heders cn be found strting from pge 496. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge The High Current (HC) versions with screw connection trnsmit current of 16 A MSTB 2,5 HC plugs should be used only with HC heders The double steel spring ensures dditionl sfety, especilly in cse of temperture nd cpcity fluctutions Coding profile CP-MSTB s protection ginst mismtching Avilble s T-version (MSTBT 2,5 HC) Accessories For ll types Type Pge Coding profile CP-MSTB 1734634 Screwdriver SZS 0,6 x 3,5 1205053 Mrker crds SK 5/3,8 or SK 5,08/3,8 798 15 18,2 Dimensionl drwing 8,3 2,5 (2,54) Note derting curves +5 (+5,08) 5 (5,08) Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 2.5 mm 2 Reduction fctor = 0.8 Number of positions = see digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 16 1 ) / 2.5 Rted insultion voltge for pollution degree 2 [V] 320 Pitch [mm] 5 / 5.08 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-2.5 / 0.2-2.5 / 24-12 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-2.5 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-2.5 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-1 / 0.2-1.5 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-1.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 250 320 630 Rted surge voltge [kv] 4 4 4 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300-300 Nominl current [A] 16-15 Connection cpcity AWG AWG 30-12 - 30-12 Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 7 Screw thred M3 Tightening torque [Nm] 0.5-0.6 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. 5.0 mm pitch, color: green [mm] 2 5.00 MSTB 2,5 HC/ 2-ST 1911855 50 3 10.00 MSTB 2,5 HC/ 3-ST 1911868 50 4 15.00 MSTB 2,5 HC/ 4-ST 1911871 50 5 20.00 MSTB 2,5 HC/ 5-ST 1911884 50 6 25.00 MSTB 2,5 HC/ 6-ST 1911897 50 7 30.00 MSTB 2,5 HC/ 7-ST 1911907 50 8 35.00 MSTB 2,5 HC/ 8-ST 1911910 50 9.00 MSTB 2,5 HC/ 9-ST 1911923 50 10 45.00 MSTB 2,5 HC/10-ST 1911936 50 11 50.00 MSTB 2,5 HC/11-ST 1911949 50 12 55.00 MSTB 2,5 HC/12-ST 1911952 50 5.08 mm pitch, color: green 2 5.08 MSTB 2,5 HC/ 2-ST-5,08 1911965 50 3 10.16 MSTB 2,5 HC/ 3-ST-5,08 1911978 50 4 15.24 MSTB 2,5 HC/ 4-ST-5,08 1911981 50 5 20.32 MSTB 2,5 HC/ 5-ST-5,08 1911994 50 6 25. MSTB 2,5 HC/ 6-ST-5,08 1912003 50 7 30.48 MSTB 2,5 HC/ 7-ST-5,08 1912016 50 8 35.56 MSTB 2,5 HC/ 8-ST-5,08 1912029 50 9.64 MSTB 2,5 HC/ 9-ST-5,08 1912032 50 10 45.72 MSTB 2,5 HC/10-ST-5,08 1912045 50 11 50.80 MSTB 2,5 HC/11-ST-5,08 1912058 50 12 55.88 MSTB 2,5 HC/12-ST-5,08 1912061 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 490 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm With screw flnge T contour, without screw flnge Dimensionl drwing Dimensionl drwing 18,2 4,7 +5 (+5,08) 18,2 +5 15 15 8,3 5 5 (5,08) (5,08) 8,3 2,5 5 Representtive derting curves of the bove-mentioned plugs Type: MSTB 2,5 HC/..-ST with MSTBA 2,5 HC/..-G Type: MSTBT 2,5 HC/... -ST with MSTBVA 2,5 HC/..-G Current crrying cpcity [A] 32 28 24 20 16 12 8 1 = 2-pos. 2 = 5-pos. 4 3 = 12-pos. 0 0 20 60 3 80 1 2 100 Current crrying cpcity [A] 32 28 24 20 16 12 8 1 = 2-pos. 2 = 5-pos. 4 3 = 12-pos. 0 0 20 60 2 3 80 1 100 Ambient temperture [ C] Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. 5.0 mm pitch, color: green 5.0 mm pitch, color: green MSTB 2,5 HC/ 2-STF 1912074 50 MSTBT 2,5 HC/ 2-ST 1926358 50 MSTB 2,5 HC/ 3-STF 1912087 50 MSTBT 2,5 HC/ 3-ST 1926248 50 MSTB 2,5 HC/ 4-STF 1912090 50 MSTBT 2,5 HC/ 4-ST 1926251 50 MSTB 2,5 HC/ 5-STF 1912100 50 MSTBT 2,5 HC/ 5-ST 1926264 50 MSTB 2,5 HC/ 6-STF 1912113 50 MSTBT 2,5 HC/ 6-ST 1926277 50 MSTB 2,5 HC/ 7-STF 1912126 50 MSTBT 2,5 HC/ 7-ST 1926280 50 MSTB 2,5 HC/ 8-STF 1912139 50 MSTBT 2,5 HC/ 8-ST 1926293 50 MSTB 2,5 HC/ 9-STF 1912142 50 MSTBT 2,5 HC/ 9-ST 1926303 50 MSTB 2,5 HC/10-STF 1912155 50 MSTBT 2,5 HC/10-ST 1926316 50 MSTB 2,5 HC/11-STF 1912168 50 MSTBT 2,5 HC/11-ST 1926329 50 MSTB 2,5 HC/12-STF 1912171 50 MSTBT 2,5 HC/12-ST 1926332 50 5.08 mm pitch, color: green MSTB 2,5 HC/ 2-STF-5,08 1912184 50 MSTB 2,5 HC/ 3-STF-5,08 1912197 50 MSTB 2,5 HC/ 4-STF-5,08 1912207 50 MSTB 2,5 HC/ 5-STF-5,08 1912210 50 MSTB 2,5 HC/ 6-STF-5,08 1912223 50 MSTB 2,5 HC/ 7-STF-5,08 1912236 50 MSTB 2,5 HC/ 8-STF-5,08 1912249 50 MSTB 2,5 HC/ 9-STF-5,08 1912252 50 MSTB 2,5 HC/10-STF-5,08 1912265 50 MSTB 2,5 HC/11-STF-5,08 1912278 50 MSTB 2,5 HC/12-STF-5,08 1912281 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 491

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 484. The designtion HC is printed in red to provide cler identifiction of High current connectors. Corresponding HC heders cn be found strting from pge 496. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Connection point fcing the smooth wll of the heder (R) 16 A plugs with verticl connection direction nd screw connection MVSTBR 2,5 HC ST, conductor entry on the coding side of the plug, therefore conductor exit to the top MVSTBW 2,5 HC ST, conductor entry on the rippled side of the plug, therefore conductor exit to the bottom HC plugs should be used only with HC heders Versions with screw flnge (-STF) for vibrtion-resistnt connection Accessories For ll types Type Pge Coding profile CP-MSTB 1734634 Screwdriver SZS 0,6 x 3,5 1205053 Mrker crds SK 5/3,8 or SK 5,08/3,8 798 26 Dimensionl drwing 12,6 8,3 2,5 (2,54) +5 (+5,08) Note derting curves 5 (5,08) Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 2.5 mm 2 Reduction fctor = 0.8 Number of positions = see digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 16 1 ) / 2.5 Rted insultion voltge for pollution degree 2 [V] 320 Pitch [mm] 5 / 5.08 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-2.5 / 0.2-2.5 / 24-12 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-2.5 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-2.5 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-1 / 0.2-1.5 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-1.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 250 320 630 Rted surge voltge [kv] 4 4 4 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300-300 Nominl current [A] 16-15 Connection cpcity AWG AWG 30-12 - 30-12 Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 7 Screw thred M3 Tightening torque [Nm] 0.5-0.6 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. 5.0 mm pitch, color: green [mm] 2 5.00 MVSTBR 2,5 HC/ 2-ST 1912294 50 3 10.00 MVSTBR 2,5 HC/ 3-ST 1912304 50 4 15.00 MVSTBR 2,5 HC/ 4-ST 1912317 50 5 20.00 MVSTBR 2,5 HC/ 5-ST 1912320 50 6 25.00 MVSTBR 2,5 HC/ 6-ST 1912333 50 7 30.00 MVSTBR 2,5 HC/ 7-ST 1912346 50 8 35.00 MVSTBR 2,5 HC/ 8-ST 1912359 50 9.00 MVSTBR 2,5 HC/ 9-ST 1912362 50 10 45.00 MVSTBR 2,5 HC/10-ST 1912375 50 11 50.00 MVSTBR 2,5 HC/11-ST 19128 50 12 55.00 MVSTBR 2,5 HC/12-ST 1912391 50 5.08 mm pitch, color: green 2 5.08 MVSTBR 2,5 HC/ 2-ST-5,08 19121 50 3 10.16 MVSTBR 2,5 HC/ 3-ST-5,08 1912414 50 4 15.24 MVSTBR 2,5 HC/ 4-ST-5,08 1912427 50 5 20.32 MVSTBR 2,5 HC/ 5-ST-5,08 1912430 50 6 25. MVSTBR 2,5 HC/ 6-ST-5,08 1912443 50 7 30.48 MVSTBR 2,5 HC/ 7-ST-5,08 1912456 50 8 35.56 MVSTBR 2,5 HC/ 8-ST-5,08 1912469 50 9.64 MVSTBR 2,5 HC/ 9-ST-5,08 1912472 50 10 45.72 MVSTBR 2,5 HC/10-ST-5,08 1912485 50 11 50.80 MVSTBR 2,5 HC/11-ST-5,08 1912498 50 12 55.88 MVSTBR 2,5 HC/12-ST-5,08 1912508 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 492 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm With screw flnge, connection point fcing the smooth pnel of the heder (R) Connection point fcing the rippled wll of the heder (W) With screw flnge, connection point fcing the rippled wll (W) of the heder 12,6 Dimensionl drwing Dimensionl drwing Dimensionl drwing 4,5 (4,58) +6 (+6,08) +5 (+5,08) 12,6 +6 (+6,08) 4,5 (4,58) 12,6 8,3 8,3 8,3 26 26 26 5 5 (5,08) (5,08) 2,5 (2,54) 5 (5,08) 5 (5,08) 5 (5,08) Representtive derting curve Type: MVSTBR 2,5 HC/..-ST with MSTBVA 2,5 HC/..-G Current crrying cpcity [A] 32 28 24 20 16 12 8 4 0 0 = 2-pos. = 5-pos. = 12-pos. 20 60 80 100 Ambient temperture [ C] Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. 5.0 mm pitch, color: green 5.0 mm pitch, color: green 5.0 mm pitch, color: green MVSTBR 2,5 HC/ 2-STF 1912511 50 MVSTBW 2,5 HC/ 2-ST 1912731 50 MVSTBW 2,5 HC/ 2-STF 1912951 50 MVSTBR 2,5 HC/ 3-STF 1912524 50 MVSTBW 2,5 HC/ 3-ST 1912744 50 MVSTBW 2,5 HC/ 3-STF 1912964 50 MVSTBR 2,5 HC/ 4-STF 1912537 50 MVSTBW 2,5 HC/ 4-ST 1912757 50 MVSTBW 2,5 HC/ 4-STF 1912977 50 MVSTBR 2,5 HC/ 5-STF 19125 50 MVSTBW 2,5 HC/ 5-ST 1912760 50 MVSTBW 2,5 HC/ 5-STF 1912980 50 MVSTBR 2,5 HC/ 6-STF 1912553 50 MVSTBW 2,5 HC/ 6-ST 1912773 50 MVSTBW 2,5 HC/ 6-STF 1912993 50 MVSTBR 2,5 HC/ 7-STF 1912566 50 MVSTBW 2,5 HC/ 7-ST 1912786 50 MVSTBW 2,5 HC/ 7-STF 1913002 50 MVSTBR 2,5 HC/ 8-STF 1912579 50 MVSTBW 2,5 HC/ 8-ST 1912799 50 MVSTBW 2,5 HC/ 8-STF 1913015 50 MVSTBR 2,5 HC/ 9-STF 1912582 50 MVSTBW 2,5 HC/ 9-ST 1912809 50 MVSTBW 2,5 HC/ 9-STF 1913028 50 MVSTBR 2,5 HC/10-STF 1912595 50 MVSTBW 2,5 HC/10-ST 1912812 50 MVSTBW 2,5 HC/10-STF 1913031 50 MVSTBR 2,5 HC/11-STF 1912605 50 MVSTBW 2,5 HC/11-ST 1912825 50 MVSTBW 2,5 HC/11-STF 1913044 50 MVSTBR 2,5 HC/12-STF 1912618 50 MVSTBW 2,5 HC/12-ST 19128 50 MVSTBW 2,5 HC/12-STF 1913057 50 5.08 mm pitch, color: green 5.08 mm pitch, color: green 5.08 mm pitch, color: green MVSTBR 2,5 HC/ 2-STF-5,08 1912621 50 MVSTBW 2,5 HC/ 2-ST-5,08 1912841 50 MVSTBW 2,5 HC/ 2-STF-5,08 1913060 50 MVSTBR 2,5 HC/ 3-STF-5,08 1912634 50 MVSTBW 2,5 HC/ 3-ST-5,08 1912854 50 MVSTBW 2,5 HC/ 3-STF-5,08 1913073 50 MVSTBR 2,5 HC/ 4-STF-5,08 1912647 50 MVSTBW 2,5 HC/ 4-ST-5,08 1912867 50 MVSTBW 2,5 HC/ 4-STF-5,08 1913086 50 MVSTBR 2,5 HC/ 5-STF-5,08 1912650 50 MVSTBW 2,5 HC/ 5-ST-5,08 1912870 50 MVSTBW 2,5 HC/ 5-STF-5,08 1913099 50 MVSTBR 2,5 HC/ 6-STF-5,08 1912663 50 MVSTBW 2,5 HC/ 6-ST-5,08 1912883 50 MVSTBW 2,5 HC/ 6-STF-5,08 1913109 50 MVSTBR 2,5 HC/ 7-STF-5,08 1912676 50 MVSTBW 2,5 HC/ 7-ST-5,08 1912896 50 MVSTBW 2,5 HC/ 7-STF-5,08 1913112 50 MVSTBR 2,5 HC/ 8-STF-5,08 1912689 50 MVSTBW 2,5 HC/ 8-ST-5,08 1912906 50 MVSTBW 2,5 HC/ 8-STF-5,08 1913125 50 MVSTBR 2,5 HC/ 9-STF-5,08 1912692 50 MVSTBW 2,5 HC/ 9-ST-5,08 1912919 50 MVSTBW 2,5 HC/ 9-STF-5,08 19131 50 MVSTBR 2,5 HC/10-STF-5,08 1912702 50 MVSTBW 2,5 HC/10-ST-5,08 1912922 50 MVSTBW 2,5 HC/10-STF-5,08 1913141 50 MVSTBR 2,5 HC/11-STF-5,08 1912715 50 MVSTBW 2,5 HC/11-ST-5,08 1912935 50 MVSTBW 2,5 HC/11-STF-5,08 1913154 50 MVSTBR 2,5 HC/12-STF-5,08 1912728 50 MVSTBW 2,5 HC/12-ST-5,08 1912948 50 MVSTBW 2,5 HC/12-STF-5,08 1913167 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 493

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 484. The designtion HC is printed in red to provide cler identifiction of High current connectors. Corresponding HC heders cn be found strting from pge 496. Corresponding inverted HC heders cn be found strting from pge 498. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, with socket contct Plug-in connectors with push-in spring connection s High Current (HC) version for 16 A Inverted versions with pin contct (FKIC 2,5 HC); e.g. for cble-cble connections or motor outputs HC plugs should be used only with HC heders Two integrted test connections Coding profiles (CP) s protection ginst mismtching Versions with screw flnge (STF) Accessories For ll types Type Pge Strin relief 837 STZ...-FKC-5,08 Test plug MPS Screwdriver SZS 0,6 x 3,5 1205053 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Only for FKC 2,5 HC/...-ST(F) Coding profile CP-MSTB 1734634 831 15 8,3 Dimensionl drwing 25,6 +5,1 (+5,7) 2,55 (2,85) Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 2.5 mm 2 Reduction fctor = 0.8 Number of positions = see digrm 5 (5,08) Only for FKIC 2,5 HC/...-ST(F) Coding section CR-MSTB 17341 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 16 1 ) / 2.5 Rted insultion voltge for pollution degree 2 [V] 320 Pitch [mm] 5 / 5.08 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-2.5 / 0.2-2.5 / 24-12 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-2.5 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-1.5 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] - /- Strnded with ferrules without plstic sleeve [mm 2 ] - Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-1.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 250 320 630 Rted surge voltge [kv] 4 4 4 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300-300 Nominl current [A] 16-15 Connection cpcity AWG AWG 26-12 - 26-12 Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 10 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. 5.0 mm pitch, color: green [mm] 2 5.00 FKC 2,5 HC/ 2-ST 1942154 50 3 10.00 FKC 2,5 HC/ 3-ST 1942167 50 4 15.00 FKC 2,5 HC/ 4-ST 1942170 50 5 20.00 FKC 2,5 HC/ 5-ST 1942183 50 6 25.00 FKC 2,5 HC/ 6-ST 1942196 50 7 30.00 FKC 2,5 HC/ 7-ST 1942206 50 8 35.00 FKC 2,5 HC/ 8-ST 1942219 50 9.00 FKC 2,5 HC/ 9-ST 1942222 50 10 45.00 FKC 2,5 HC/10-ST 1942235 50 11 50.00 FKC 2,5 HC/11-ST 1942248 50 12 55.00 FKC 2,5 HC/12-ST 1942251 50 5.08 mm pitch, color: green 2 5.08 FKC 2,5 HC/ 2-ST-5,08 1942374 50 3 10.16 FKC 2,5 HC/ 3-ST-5,08 19427 50 4 15.24 FKC 2,5 HC/ 4-ST-5,08 1942390 50 5 20.32 FKC 2,5 HC/ 5-ST-5,08 19420 50 6 25. FKC 2,5 HC/ 6-ST-5,08 1942413 50 7 30.48 FKC 2,5 HC/ 7-ST-5,08 1942426 50 8 35.56 FKC 2,5 HC/ 8-ST-5,08 1942439 50 9.64 FKC 2,5 HC/ 9-ST-5,08 1942442 50 10 45.72 FKC 2,5 HC/10-ST-5,08 1942455 50 11 50.80 FKC 2,5 HC/11-ST-5,08 1942468 50 12 55.88 FKC 2,5 HC/12-ST-5,08 1942471 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 494 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm With screw flnge nd socket Contct Inverted with pin contct Inverted with pin contct, with screw flnge Dimensionl drwing Dimensionl drwing Dimensionl drwing 25,6 4,96 +5,1 (4,74) (+5,7) 27 +7,08 27 4,73 +5,7 15 15 15 8,3 5 (5,08) 5 (5,08) 3,54 5,08 5,08 5,08 Representtive derting curves of the bove-mentioned plugs Type: FKC 2,5 HC/...-ST with MSTBA 2,5 HC/...-G Type: FKIC 2,5 HC/...-ST- 5,08 with IC 2,5 HC/...-G- 5,08 Current crrying cpcity [A] 32 28 24 20 1 32 28 24 20 16 16 12 2 12 1 = 2-pos. 8 8 1 = 2-pos. 2 = 5-pos. 4 3 2 = 5-pos. 3 = 12-pos. 4 3 = 12-pos. 0 0 20 60 80 100 0 0 20 Current crrying cpcity [A] 60 1 3 80 2 100 Ambient temperture [ C] Ambient temperture [ C] Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. 5.0 mm pitch, color: green FKC 2,5 HC/ 2-STF 1942264 50 FKC 2,5 HC/ 3-STF 1942277 50 FKC 2,5 HC/ 4-STF 1942280 50 FKC 2,5 HC/ 5-STF 1942293 50 FKC 2,5 HC/ 6-STF 1942303 50 FKC 2,5 HC/ 7-STF 1942316 50 FKC 2,5 HC/ 8-STF 1942329 50 FKC 2,5 HC/ 9-STF 1942332 50 FKC 2,5 HC/10-STF 1942345 50 FKC 2,5 HC/11-STF 1942358 50 FKC 2,5 HC/12-STF 1942361 50 5.08 mm pitch, color: green 5.08 mm pitch, color: green 5.08 mm pitch, color: green FKC 2,5 HC/ 2-STF-5,08 1942484 50 FKIC 2,5 HC/ 2-ST-5,08 1942594 50 FKIC 2,5 HC/ 2-STF-5,08 1942701 50 FKC 2,5 HC/ 3-STF-5,08 1942497 50 FKIC 2,5 HC/ 3-ST-5,08 1942604 50 FKIC 2,5 HC/ 3-STF-5,08 1942714 50 FKC 2,5 HC/ 4-STF-5,08 1942507 50 FKIC 2,5 HC/ 4-ST-5,08 1942617 50 FKIC 2,5 HC/ 4-STF-5,08 1942727 50 FKC 2,5 HC/ 5-STF-5,08 1942510 50 FKIC 2,5 HC/ 5-ST-5,08 1942620 50 FKIC 2,5 HC/ 5-STF-5,08 1942730 50 FKC 2,5 HC/ 6-STF-5,08 1942523 50 FKIC 2,5 HC/ 6-ST-5,08 1942633 50 FKIC 2,5 HC/ 6-STF-5,08 1942743 50 FKC 2,5 HC/ 7-STF-5,08 1942536 50 FKIC 2,5 HC/ 7-ST-5,08 1942646 50 FKIC 2,5 HC/ 7-STF-5,08 1942756 50 FKC 2,5 HC/ 8-STF-5,08 1942549 50 FKIC 2,5 HC/ 8-ST-5,08 1942659 50 FKIC 2,5 HC/ 8-STF-5,08 1942769 50 FKC 2,5 HC/ 9-STF-5,08 1942552 50 FKIC 2,5 HC/ 9-ST-5,08 1942662 50 FKIC 2,5 HC/ 9-STF-5,08 1942772 50 FKC 2,5 HC/10-STF-5,08 1942565 50 FKIC 2,5 HC/10-ST-5,08 1942675 50 FKIC 2,5 HC/10-STF-5,08 1942785 50 FKC 2,5 HC/11-STF-5,08 1942578 50 FKIC 2,5 HC/11-ST-5,08 1942688 50 FKIC 2,5 HC/11-STF-5,08 1942798 50 FKC 2,5 HC/12-STF-5,08 1942581 50 FKIC 2,5 HC/12-ST-5,08 1942691 50 FKIC 2,5 HC/12-STF-5,08 1942808 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 495

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Heders with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 484. The designtion HC is printed in red to provide cler identifiction of High current connectors. Corresponding HC plug components cn be found strting from pge 490. Mounting screws for bse element with threded flnge (...GF...): sheet metl screw ISO 1481-ST 2,2x6,5 C or ISO 7049-ST 2,2x6,5 C. Screw connection only permitted prior to soldering. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Horizontl 16-A (HC) heder in horizontl nd verticl (MSTBV) design Lterl HC print ( High Current ) HC heder should be used only with HC plugs Vibrtion-resistnt connection with threded flnge (-GF) Coding sections (CR) s protection ginst mismtching No possibility of lterl mismting due to side pnels Accessories For ll types Type Pge Coding section CR-MSTB 17341 Coding tb MSTB-BL 1755477 Mrker crds SK 5/3,8 orsk 5,08/3,8 837 798 22 12 2 5 (5,08) 3,5 (3,54) 2 1,4 15 3,5 Dimensionl drwing 8,6 3,5 (3,54) Drilling digrm +7 (+7,08) 5 (5,08) Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 16 1 ) Rted insultion voltge for pollution degree 2 [V] 320 Pitch [mm] 5 / 5.08 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 250 320 0 Rted surge voltge [kv] 4 4 4 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300-300 Nominl current [A] 16-15 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.4 / 1 x 1 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. 5.0 mm pitch, color: green [mm] 2 5.00 MSTBA 2,5 HC/ 2-G 1923759 50 3 10.00 MSTBA 2,5 HC/ 3-G 1923762 50 4 15.00 MSTBA 2,5 HC/ 4-G 1923775 50 5 20.00 MSTBA 2,5 HC/ 5-G 1923788 50 6 25.00 MSTBA 2,5 HC/ 6-G 1923791 50 7 30.00 MSTBA 2,5 HC/ 7-G 19201 50 8 35.00 MSTBA 2,5 HC/ 8-G 19214 50 9.00 MSTBA 2,5 HC/ 9-G 19227 50 10 45.00 MSTBA 2,5 HC/10-G 19230 50 11 50.00 MSTBA 2,5 HC/11-G 19243 50 12 55.00 MSTBA 2,5 HC/12-G 19256 50 5.08 mm pitch, color: green 2 5.08 MSTBA 2,5 HC/ 2-G-5,08 19269 50 3 10.16 MSTBA 2,5 HC/ 3-G-5,08 19272 50 4 15.24 MSTBA 2,5 HC/ 4-G-5,08 19285 50 5 20.32 MSTBA 2,5 HC/ 5-G-5,08 19298 50 6 25. MSTBA 2,5 HC/ 6-G-5,08 1923908 50 7 30.48 MSTBA 2,5 HC/ 7-G-5,08 1923911 50 8 35.56 MSTBA 2,5 HC/ 8-G-5,08 1923924 50 9.64 MSTBA 2,5 HC/ 9-G-5,08 1923937 50 10 45.72 MSTBA 2,5 HC/10-G-5,08 19239 50 11 50.80 MSTBA 2,5 HC/11-G-5,08 1923953 50 12 55.88 MSTBA 2,5 HC/12-G-5,08 1923966 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 496 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Horizontl, with threded flnge Verticl Verticl, with threded flnge Dimensionl drwing Dimensionl drwing Dimensionl drwing 15 3,5 22 2,5 12 8,6 2 5 (5,08) +15 (+15,24) 5 (5,08) 22 15 3,9 29,5 12,6 3,8 8,6 12 5 (5,08) 5 (5,08) 7,5 () 5 (5,08) 3,5 (3,54) 5 (5,08) 5 (5,08) 7,5 () 2,5 2 1,4 3,8 3,8 2,4 3,5 (3,54) +7 (+7,08) 5 (5,08) 22 12 3,9 15 3,8 8,6 5 (5,08) +15 (+15,24) 5 7,5 (5,08) () Drilling digrm Drilling digrm Drilling digrm 2,4 1,4 1,4 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. 5.0 mm pitch, color: green 5.0 mm pitch, color: green 5.0 mm pitch, color: green MSTB 2,5 HC/ 2-GF 1923979 50 MSTBVA 2,5 HC/ 2-G 1924198 50 MSTBV 2,5 HC/ 2-GF 1924415 50 MSTB 2,5 HC/ 3-GF 1923982 50 MSTBVA 2,5 HC/ 3-G 1924208 50 MSTBV 2,5 HC/ 3-GF 1924428 50 MSTB 2,5 HC/ 4-GF 1923995 50 MSTBVA 2,5 HC/ 4-G 1924211 50 MSTBV 2,5 HC/ 4-GF 1924431 50 MSTB 2,5 HC/ 5-GF 19204 50 MSTBVA 2,5 HC/ 5-G 1924224 50 MSTBV 2,5 HC/ 5-GF 1924444 50 MSTB 2,5 HC/ 6-GF 19217 50 MSTBVA 2,5 HC/ 6-G 1924237 50 MSTBV 2,5 HC/ 6-GF 1924457 50 MSTB 2,5 HC/ 7-GF 19220 50 MSTBVA 2,5 HC/ 7-G 19242 50 MSTBV 2,5 HC/ 7-GF 1924460 50 MSTB 2,5 HC/ 8-GF 19233 50 MSTBVA 2,5 HC/ 8-G 1924253 50 MSTBV 2,5 HC/ 8-GF 1924473 50 MSTB 2,5 HC/ 9-GF 19246 50 MSTBVA 2,5 HC/ 9-G 1924266 50 MSTBV 2,5 HC/ 9-GF 1924486 50 MSTB 2,5 HC/10-GF 19259 50 MSTBVA 2,5 HC/10-G 1924279 50 MSTBV 2,5 HC/10-GF 1924499 50 MSTB 2,5 HC/11-GF 19262 50 MSTBVA 2,5 HC/11-G 1924282 50 MSTBV 2,5 HC/11-GF 1924509 50 MSTB 2,5 HC/12-GF 19275 50 MSTBVA 2,5 HC/12-G 1924295 50 MSTBV 2,5 HC/12-GF 1924512 50 5.08 mm pitch, color: green 5.08 mm pitch, color: green 5.08 mm pitch, color: green MSTB 2,5 HC/ 2-GF-5,08 19288 50 MSTBVA 2,5 HC/ 2-G-5,08 1924305 50 MSTBV 2,5 HC/ 2-GF-5,08 1924525 50 MSTB 2,5 HC/ 3-GF-5,08 19291 50 MSTBVA 2,5 HC/ 3-G-5,08 1924318 50 MSTBV 2,5 HC/ 3-GF-5,08 19245 50 MSTB 2,5 HC/ 4-GF-5,08 1924101 50 MSTBVA 2,5 HC/ 4-G-5,08 1924321 50 MSTBV 2,5 HC/ 4-GF-5,08 1924541 50 MSTB 2,5 HC/ 5-GF-5,08 1924114 50 MSTBVA 2,5 HC/ 5-G-5,08 1924334 50 MSTBV 2,5 HC/ 5-GF-5,08 1924554 50 MSTB 2,5 HC/ 6-GF-5,08 1924127 50 MSTBVA 2,5 HC/ 6-G-5,08 1924347 50 MSTBV 2,5 HC/ 6-GF-5,08 1924567 50 MSTB 2,5 HC/ 7-GF-5,08 1924130 50 MSTBVA 2,5 HC/ 7-G-5,08 1924350 50 MSTBV 2,5 HC/ 7-GF-5,08 1924570 50 MSTB 2,5 HC/ 8-GF-5,08 1924143 50 MSTBVA 2,5 HC/ 8-G-5,08 1924363 50 MSTBV 2,5 HC/ 8-GF-5,08 1924583 50 MSTB 2,5 HC/ 9-GF-5,08 1924156 50 MSTBVA 2,5 HC/ 9-G-5,08 1924376 50 MSTBV 2,5 HC/ 9-GF-5,08 1924596 50 MSTB 2,5 HC/10-GF-5,08 1924169 50 MSTBVA 2,5 HC/10-G-5,08 19249 50 MSTBV 2,5 HC/10-GF-5,08 1924606 50 MSTB 2,5 HC/11-GF-5,08 1924172 50 MSTBVA 2,5 HC/11-G-5,08 1924392 50 MSTBV 2,5 HC/11-GF-5,08 1924619 50 MSTB 2,5 HC/12-GF-5,08 1924185 50 MSTBVA 2,5 HC/12-G-5,08 19242 50 MSTBV 2,5 HC/12-GF-5,08 1924622 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 497

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Heders with socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. The designtion HC is printed in red to provide cler identifiction of High current connectors. Corresponding inverted HC plug components cn be found strting from pge 495. Mounting screws for bse element with threded flnge (...GF...): sheet metl screw ISO 1481-ST 2,2x6,5 C or ISO 7049-ST 2,2x6,5 C. Screw connection only permitted prior to soldering. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 484. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Horizontl Inverted 16-A (HC) heder with socket contct for shock-proof pplictions or PCB-PCB connections Horizontl nd verticl (ICV) designs Double steel spring s extr sfety ginst contct corrosion Vibrtion-resistnt connection with threded flnge (-GF) HC heder should be used only with HC connectors Accessories For ll types Type Pge Coding profile CP-MSTB 1734634 Test plug MPS Reducing plug RPS 0201647 831 831 Dimensionl drwing 3,5 10,2 37,1 19 +7,08 5,08 8,3 3,54 2,81 5,08 3,54 5,08 5,08 2,81 1,4 Drilling digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 16 1 ) Rted insultion voltge for pollution degree 2 [V] 320 Pitch [mm] 5.08 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 320 320 630 Rted surge voltge [kv] 4 4 4 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 250-300 Nominl current [A] 16-10 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.4 / 1.2 x 0.5 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. 5.08 mm pitch, color: green [mm] 2 5.08 IC 2,5 HC/ 2-G-5,08 1943302 50 3 10.16 IC 2,5 HC/ 3-G-5,08 1943315 50 4 15.24 IC 2,5 HC/ 4-G-5,08 1943328 50 5 20.32 IC 2,5 HC/ 5-G-5,08 1943331 50 6 25. IC 2,5 HC/ 6-G-5,08 1943344 50 7 30.48 IC 2,5 HC/ 7-G-5,08 1943360 50 8 35.56 IC 2,5 HC/ 8-G-5,08 1943373 50 9.64 IC 2,5 HC/ 9-G-5,08 19436 50 10 45.72 IC 2,5 HC/10-G-5,08 1943399 50 11 50.80 IC 2,5 HC/11-G-5,08 19439 50 12 55.88 IC 2,5 HC/12-G-5,08 1943412 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 498 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Horizontl, with threded flnge Verticl Verticl, with threded flnge Dimensionl drwing Dimensionl drwing Dimensionl drwing 37,1 +15,2 19 37,1 8,3 +7,08 37,1 8,3 +15,2 3,5 10,2 5,08 5,08 8,3 19 19 7,6 2,81 5,08 3,6 5,08 10,2 1, 3,54 5,08 7,6 5,08 5,08 3,54 5,08 5,08 5,08 7,6 5,08 2,81 2,4 5,08 1,36 5,08 1, 3,9 3,6 5,08 1, 10,2 7,6 5,08 5,08 Drilling digrm Drilling digrm Drilling digrm 1,4 1,4 1,4 2,4 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. 5.08 mm pitch, color: green 5.08 mm pitch, color: green 5.08 mm pitch, color: green IC 2,5 HC/ 2-GF-5,08 1943425 50 ICV 2,5 HC/ 2-G-5,08 1943535 50 ICV 2,5 HC/ 2-GF-5,08 1943645 50 IC 2,5 HC/ 3-GF-5,08 19434 50 ICV 2,5 HC/ 3-G-5,08 1943548 50 ICV 2,5 HC/ 3-GF-5,08 1943658 50 IC 2,5 HC/ 4-GF-5,08 1943441 50 ICV 2,5 HC/ 4-G-5,08 1943551 50 ICV 2,5 HC/ 4-GF-5,08 1943661 50 IC 2,5 HC/ 5-GF-5,08 1943454 50 ICV 2,5 HC/ 5-G-5,08 1943564 50 ICV 2,5 HC/ 5-GF-5,08 1943674 50 IC 2,5 HC/ 6-GF-5,08 1943467 50 ICV 2,5 HC/ 6-G-5,08 1943577 50 ICV 2,5 HC/ 6-GF-5,08 1943687 50 IC 2,5 HC/ 7-GF-5,08 1943470 50 ICV 2,5 HC/ 7-G-5,08 1943580 50 ICV 2,5 HC/ 7-GF-5,08 1943690 50 IC 2,5 HC/ 8-GF-5,08 1943483 50 ICV 2,5 HC/ 8-G-5,08 1943593 50 ICV 2,5 HC/ 8-GF-5,08 1943700 50 IC 2,5 HC/ 9-GF-5,08 1943496 50 ICV 2,5 HC/ 9-G-5,08 1943603 50 ICV 2,5 HC/ 9-GF-5,08 1943713 50 IC 2,5 HC/10-GF-5,08 1943506 50 ICV 2,5 HC/10-G-5,08 1943616 50 ICV 2,5 HC/10-GF-5,08 1943726 50 IC 2,5 HC/11-GF-5,08 1943519 50 ICV 2,5 HC/11-G-5,08 1943629 50 ICV 2,5 HC/11-GF-5,08 1943739 50 IC 2,5 HC/12-GF-5,08 1943522 50 ICV 2,5 HC/12-G-5,08 1943632 50 ICV 2,5 HC/12-GF-5,08 1943742 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 499

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Verticl plug-in connectors for 600 V UL Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 484. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Connection point fcing the smooth wll of the heder (R), 600 V UL pprovl High-cpcity connectors for voltges of up to 1000 V s per IEC Plugs with unrestricted 600 V UL pprovl Plug-in direction verticl to the PCB GMVSTBR 2,5 HV...ST, conductor entry on the coding side of the plug, so conductor exit upwrd GMVSTBW 2,5 HV...ST, conductor entry on the rippled side of the plug, so conductor exit downwrd Comptible with the GMSTB 2,5/...-G- bse strips, see pge 342 Accessories For ll types Type Pge Coding profile CP-MSTB 1734634 Screwdriver SZS 0,6 x 3,5 1205053 Mrker crds SK /3,8 799 27,5 8,3 Dimensionl drwing 15 2,79 Note derting curves +5,58 Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 2.5 mm 2 Reduction fctor = 0.8 Number of positions = see digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 12 1 ) / 2.5 Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-2.5 / 0.2-2.5 / 24-12 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-2.5 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-2.5 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-1 / 0.2-1.5 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-1 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 500 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 15 15 - Connection cpcity AWG AWG 30-12 30-12 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 7 Screw thred M3 Tightening torque [Nm] 0.5-0.6 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 GMVSTBR 2,5 HV/ 2-ST- 1774454 50 3 15.24 GMVSTBR 2,5 HV/ 3-ST- 1993954 50 4 22.86 GMVSTBR 2,5 HV/ 4-ST- 1774467 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 500 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Connection point fcing the rippled wll of the heder (W), 600 V UL pprovl +5,58 Dimensionl drwing 15 8,3 27,5 2,79 Representtive derting curve Type: GMVSTBR 2,5 HV/...-ST- with GMSTBA 2,5/...-G- Current crrying cpcity [A] 20 16 12 8 4 1 = 2-pos. 2 = 4-pos. 0 0 20 60 2 1 80 100 Ambient temperture [ C] Ordering dt Type Pcs. / Pkt. Pitch 7.62 mm, color: green GMVSTBW 2,5 HV/ 2-ST- 1771910 50 GMVSTBW 2,5 HV/ 3-ST- 1993967 50 GMVSTBW 2,5 HV/ 4-ST- 1927221 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 501

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Plugs with screw connection for 600 V UL Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. The designtion HC is printed in red to provide cler identifiction of High current connectors. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. 2) Diverging UL dt with GIC 2,5 HCV/...-ST-: nominl current = 16 A. With socket contct, 600 V UL pprovl High-cpcity within minimum spce: current crrying cpcity of 16 A in combintion with n unrestricted 600-V- UL pprovl Compct 7.62 mm pitch GMSTB 2,5 HCV plugs should be used only with GMSTBA 2,5 HC bse strips The double steel spring ensures dditionl sfety, especilly in cse of temperture nd cpcity fluctutions The versions with Lock & Relese levers lock the plug to the heder nd lso serve s relese tool Inverted GIC 2,5 HCV plugs with pin contcts Accessories For ll types Type Pge Coding profile CP-MSTB 1734634 Mrker crds SK /3,8 Screwdriver SZS 0,6 x 3,5 1205053 799 17,5 Dimensionl drwing 21 3,7 Note derting curves 15,02 Derting curves ccording to DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 2.5 mm 2 Reduction fctor = 0.8 No. of positions: See digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 16 1 ) / 2.5 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-2.5 / 0.2-2.5 / 24-12 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-2.5 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-2.5 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-1 / 0.2-1.5 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-1 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 18.5 2 ) 18.5 - Connection cpcity AWG AWG 30-12 30-12 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 8 Screw thred M3 Tightening torque [Nm] 0.5-0.6 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 GMSTB 2,5 HCV/ 2-ST- 1714278 50 3 15.24 GMSTB 2,5 HCV/ 3-ST- 1714281 50 4 22.86 GMSTB 2,5 HCV/ 4-ST- 1714294 50 5 30.48 GMSTB 2,5 HCV/ 5-ST- 1714304 50 6.10 GMSTB 2,5 HCV/ 6-ST- 1714317 50 7 45.72 GMSTB 2,5 HCV/ 7-ST- 1714320 50 8 53.34 GMSTB 2,5 HCV/ 8-ST- 1714333 50 9 60.96 GMSTB 2,5 HCV/ 9-ST- 1714346 50 10 68.58 GMSTB 2,5 HCV/10-ST- 1714359 50 11 76.20 GMSTB 2,5 HCV/11-ST- 1714362 50 12 83.82 GMSTB 2,5 HCV/12-ST- 1714375 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 502 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Inverted with pin contct, 600 V UL pprovl Lock & Relese locking, with socket contct, 600 V UL pprovl Dimensionl drwing Dimensionl drwing 22,8 +7,4 29,1 +15,22 17,5 17,5 3,7 8,3 21 7,61 Current crrying cpcity [A] 36 32 28 24 20 16 12 1 = 2-pos. 8 2 = 5-pos. 4 3 = 12-pos. 0 0 20 Representtive derting curves of the bove-mentioned plugs Type: GMSTB 2,5 HCV/...-ST- with GMSTBA 2,5 HC/...-G- 60 3 Ordering dt 2 80 1 100 Ambient temperture [ C] Type_ GIC 2.5HCV/...-ST-7.62 with GIC 2.5HC/...-G-7.62 32 28 24 20 16 12 8 1 = 2-pos. 4 2 = 5-pos. 3 = 12-pos. 0 0 20 2 3 60 Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green GIC 2,5 HCV/ 2-ST- 1745629 50 GMSTB 2,5 HCV/ 2-ST--LR 1812759 50 GIC 2,5 HCV/ 3-ST- 1745632 50 GMSTB 2,5 HCV/ 3-ST--LR 1812762 50 GIC 2,5 HCV/ 4-ST- 1745645 50 GMSTB 2,5 HCV/ 4-ST--LR 1812775 50 GIC 2,5 HCV/ 5-ST- 1745658 50 GMSTB 2,5 HCV/ 5-ST--LR 1812788 50 GIC 2,5 HCV/ 6-ST- 1745661 50 GMSTB 2,5 HCV/ 6-ST--LR 1812791 50 GIC 2,5 HCV/ 7-ST- 1745674 50 GMSTB 2,5 HCV/ 7-ST--LR 1812801 50 GIC 2,5 HCV/ 8-ST- 1745687 50 GMSTB 2,5 HCV/ 8-ST--LR 1812814 50 GIC 2,5 HCV/ 9-ST- 1745690 50 GMSTB 2,5 HCV/10-ST--LR 1812830 50 GIC 2,5 HCV/10-ST- 1745700 50 GMSTB 2,5 HCV/10-ST--LR 1812830 50 GIC 2,5 HCV/11-ST- 1745713 50 GMSTB 2,5 HCV/11-ST--LR 1812843 50 GIC 2,5 HCV/12-ST- 1745726 50 GMSTB 2,5 HCV/12-ST--LR 1812856 50 Current crrying cpcity [A] 1 80 100 Ambient temperture [ C] Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 503

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Heders with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. The designtion HC is printed in red to provide cler identifiction of High current connectors. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 484. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Horizontl Accessories Dimensionl drwing GMSTB 2,5 HC heders for combintion with GMSTB 2,5 HCV plugs Compct 7.62 mm pitch CR-MSTB coding sections s protection ginst mismting Lock & Relese versions lock the plug to the heder nd lso serve s relese tool For ll types Type Pge Coding section CR-MSTB 17341 Mrker crds SK /3,8 Coding tb MSTB-BL 1755477 799 837 3,5 8,6 3,81 2 1,4 12 + 2 3,81 Drilling digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 16 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 500 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300-300 Nominl current [A] 18.5-10 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.4 / 1 x 1 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 GMSTBA 2,5 HC/ 2-G- 1728853 50 3 15.24 GMSTBA 2,5 HC/ 3-G- 1728866 50 4 22.86 GMSTBA 2,5 HC/ 4-G- 1728879 50 5 30.48 GMSTBA 2,5 HC/ 5-G- 1728882 50 6.10 GMSTBA 2,5 HC/ 6-G- 1728895 50 7 45.72 GMSTBA 2,5 HC/ 7-G- 1728905 50 8 53.34 GMSTBA 2,5 HC/ 8-G- 1728918 50 9 60.96 GMSTBA 2,5 HC/ 9-G- 1728921 50 10 68.58 GMSTBA 2,5 HC/10-G- 1728934 50 11 76.20 GMSTBA 2,5 HC/11-G- 1728947 50 12 83.82 GMSTBA 2,5 HC/12-G- 1728950 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 504 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Verticl Lock & Relese locking, horizontl Lock & Relese locking, verticl Dimensionl drwing Dimensionl drwing Dimensionl drwing 8,6 + 12 +18,2 +18,2 3,9 3,81 6,1 9,1 6,1 3,8 1,4 2,5 2 1,4 3,8 Ø2,4 12 8,6 12 3,8 3,81 3,2 2 9,1 3,9 3,8 6,1 Drilling digrm Drilling digrm Drilling digrm 2,4 Ø1,4 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green GMSTBVA 2,5 HC/ 2-G- 1792397 50 GMSTBA 2,5 HC/ 2-G--LR 1812869 50 GMSTBVA 2,5 HC/ 2-G--LR 1812979 50 GMSTBVA 2,5 HC/ 3-G- 1767979 50 GMSTBA 2,5 HC/ 3-G--LR 1812872 50 GMSTBVA 2,5 HC/ 3-G--LR 1812982 50 GMSTBVA 2,5 HC/ 4-G- 1758179 50 GMSTBA 2,5 HC/ 4-G--LR 1812885 50 GMSTBVA 2,5 HC/ 4-G--LR 1812995 50 GMSTBVA 2,5 HC/ 5-G- 1773455 50 GMSTBA 2,5 HC/ 5-G--LR 1812898 50 GMSTBVA 2,5 HC/ 5-G--LR 1813004 50 GMSTBVA 2,5 HC/ 6-G- 1767050 50 GMSTBA 2,5 HC/ 6-G--LR 1812908 50 GMSTBVA 2,5 HC/ 6-G--LR 1813017 50 GMSTBVA 2,5 HC/ 7-G- 17927 50 GMSTBA 2,5 HC/ 7-G--LR 1812911 50 GMSTBVA 2,5 HC/ 7-G--LR 1813020 50 GMSTBVA 2,5 HC/ 8-G- 1792410 50 GMSTBA 2,5 HC/ 8-G--LR 1812924 50 GMSTBVA 2,5 HC/ 8-G--LR 1813033 50 GMSTBVA 2,5 HC/ 9-G- 1792423 50 GMSTBA 2,5 HC/ 9-G--LR 1812937 50 GMSTBVA 2,5 HC/ 9-G--LR 1813046 50 GMSTBVA 2,5 HC/10-G- 1792436 50 GMSTBA 2,5 HC/10-G--LR 18129 50 GMSTBVA 2,5 HC/10-G--LR 1813059 50 GMSTBVA 2,5 HC/11-G- 1792449 50 GMSTBA 2,5 HC/11-G--LR 1812953 50 GMSTBVA 2,5 HC/11-G--LR 1813062 50 GMSTBVA 2,5 HC/12-G- 1792452 50 GMSTBA 2,5 HC/12-G--LR 1812966 50 GMSTBVA 2,5 HC/12-G--LR 1813075 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 505

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Heders with socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 484. The designtion HC is printed in red to provide cler identifiction of High current connectors. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Horizontl Inverted GIC 2,5 HC heders with socket contcts for touch-proof device outputs (with GIC 2,5 HCV/... ST) or PCB-PCB connection (with GMSTBA 2,5 HC/... -G) Mximum contct sfety, thnks to n integrted double steel spring Coding profile CP-MSTB s protection ginst mismtching Compct 7.62 mm pitch Accessories For ll types Type Pge Coding profile CP-MSTB 1734634 Mrker crds SK /3,8 Reducing plug RPS 0201647 Test plug MPS 799 831 831 Dimensionl drwing 3,5 10,2 19 8,3 + 5,08 2,8 3,76 3,76 5,08 2,8 1,4 Drilling digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 16 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 630 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 250-300 Nominl current [A] 16-10 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.4 / 1.2 x 0.5 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 GIC 2,5 HC/ 2-G- 1745784 50 3 15.24 GIC 2,5 HC/ 3-G- 1745797 50 4 22.86 GIC 2,5 HC/ 4-G- 1745807 50 5 30.48 GIC 2,5 HC/ 5-G- 1745810 50 6.10 GIC 2,5 HC/ 6-G- 1745823 50 7 45.72 GIC 2,5 HC/ 7-G- 1745836 50 8 53.34 GIC 2,5 HC/ 8-G- 1745849 50 9 60.96 GIC 2,5 HC/ 9-G- 1745852 50 10 68.58 GIC 2,5 HC/10-G- 1745865 50 11 76.20 GIC 2,5 HC/11-G- 1745878 50 12 83.82 GIC 2,5 HC/12-G- 1745881 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 506 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Verticl 10,2 Dimensionl drwing + 5,08 1,36 3,76 5,08 8,3 3,6 19 3,76 Drilling digrm 1,36 1,4 Ordering dt Type Pcs. / Pkt. Pitch 7.62 mm, color: green GICV 2,5 HC/ 2-G- 1756485 50 GICV 2,5 HC/ 3-G- 1756498 50 GICV 2,5 HC/ 4-G- 1756508 50 GICV 2,5 HC/ 5-G- 1756511 50 GICV 2,5 HC/ 6-G- 1756524 50 GICV 2,5 HC/ 7-G- 1756537 50 GICV 2,5 HC/ 8-G- 17565 50 GICV 2,5 HC/ 9-G- 1756553 50 GICV 2,5 HC/10-G- 1756566 50 GICV 2,5 HC/11-G- 1756579 50 GICV 2,5 HC/12-G- 1756582 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 507

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm ME/ME MAX plug-in connectors/heders, 7.62 mm pitch Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. GMSTBT 2,5 HV/...-ST-7,25 GY7035 No. of pos. Dimension b [mm] 2 14.95 3 19.95 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Suitble for GMSTBO 2,5 HV... heders, highcurrent-comptible Accessories Dimensionl drwing Suitble for ME/ME MAX electronic housing 7.25 mm pitch for unlimited 600 V UL pprovl Orthogonl screw/plug-in connection 2 nd 3 positions suitble for 17.5/35 mm nd 22.5/45 mm housing width For ll types Type Pge Coding profile CP-MSTB 1734634 Mrker crds SK 7,5/3,8 Screwdriver SZS 0,6 x 3,5 1205053 799 17,2 21 8,3 b Representtive derting curve Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 16 1 ) / 2.5 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.25 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-2.5 / 0.2-2.5 / 24-12 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-2.5 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-2.5 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.1-1 / 0.2-1.5 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-1 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 16 16 - Connection cpcity AWG AWG 24-12 24-12 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 8 Screw thred M3 Tightening torque [Nm] 0.5-0.6 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch: 7.25 mm, color: light gry [mm] 2 7.25 GMSTBT 2,5 HV/2-ST-7,25 GY7035 2199757 50 3 14.50 GMSTBT 2,5 HV/3-ST-7,25 GY7035 2199553 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 508 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 509

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm ME/ME MAX plug-in connectors/heders, 7.62 mm pitch Notes: GMSTBO 2,5 HV/...-GL/GR No. of pos. Dimension b Dimension c [mm] [mm] 2 14.95 8.00 3 19.95 16.00 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Heder with left pin strip leding off t right ngle, box pckging Suitble for ME/ME MAX electronic housing 7.25 mm pitch for unlimited 600 V UL pprovl Orthogonl screw/plug-in connection THR solderble 2 nd 3 positions suitble for 17.5/35 mm nd 22.5/45 mm housing width Left nd right design Delivery form: box pckging bulk mteril or tpe-on-reel pcking for utomted mounting Accessories For ll types Type Pge Coding section CR-MSTBO G1 2199618 Mrker crds SK 7,5/3,8 799 Dimensionl drwing b 15,65 c 5,04 10,75 2,65 8 5,04 Drilling digrm 3,98 Ø1,5 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 16 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] - Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 0 630 630 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 150 300 Nominl current [A] 16 16 10 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group LCP / III Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.5 / 1.0 x 1.0 mm No. of pos. Ordering dt Type Pcs. / Pkt. Dim. Pitch: 7.25 mm, color: blck [mm] 7.25 GMSTBO 2,5 HV/ 2-GL-7,25 THR 2199867 50 14.50 GMSTBO 2,5 HV/ 3-GL-7,25 THR 2199663 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 510 PHOENIX CONTACT

HC series plug-in connectors up to 16 A/2.5 mm2, pitch 5.0 or 5.08/7.62 mm Heder with right pin strip leding off t right ngle, box pckging Heder with left pin strip leding off t right ngle, tpe-on-reel pcking Heder with right pin strip leding off t right ngle, tpe-on-reel pcking Dimensionl drwing Dimensionl drwing Dimensionl drwing b b b 15,65 15,65 15,65 2,65 10,75 10,75 2,65 2,65 10,75 8 8 8 5,04 5,04 5,04 c 5,04 c 5,04 c 5,04 3,98 3,98 3,98 Drilling digrm Drilling digrm Drilling digrm Ø1,5 Ø1,5 Ø1,5 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch: 7.25 mm, color: blck Pitch: 7.25 mm, color: blck Pitch: 7.25 mm, color: blck GMSTBO 2,5 HV/ 2-GR-7,25 THR 2199760 50 GMSTBO 2,5 HV/ 2-GL-7,25THRR32 2279703 110 GMSTBO 2,5 HV/ 2-GR-7,25THRR32 2279606 110 GMSTBO 2,5 HV/ 3-GR-7,25 THR 2199566 50 GMSTBO 2,5 HV/3-GL-7,25 THRR44 2200263 70 GMSTBO 2,5 HV/3-GR-7,25 THRR44 2200262 70 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 511

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Plugs with screw nd crimp connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge High-cpcity plugs with current crrying cpcity of 20 A Screw connection up to 4 mm 2, strnded Integrted double steel spring s extr sfety ginst contct corrosion Avilble with 2 to 12-pos. Vibrtion-resistnt connection with screw flnge (PC 4/...-STF-) Plug components cn be coded using the CP-PC RD coding profiles Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 Screwdriver SZS 0,6 x 3,5 1205053 799 18,1 Dimensionl drwing 30,7 14,7 +7,6 3,8 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 4 mm 2 Reduction fctor = 0.8 Number of positions = see digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 20 1 ) / 4 Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-4 / 0.2-4 / 24-10 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-4 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-2.5 / 0.2-1.5 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-2.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 0 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 20 20 5 Connection cpcity AWG AWG 30-10 30-10 30-10 Approvl dt (CSA) Use Group B C D Nominl voltge [V] 300 300 - Nominl current [A] 20 20 - Connection cpcity AWG AWG 28-10 28-10 - Generl dt Stripping length [mm] 7 Screw thred M3 Tightening torque [Nm] 0.5-0.6 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 PC 4/ 2-ST- 1804904 50 3 15.24 PC 4/ 3-ST- 1804917 50 4 22.86 PC 4/ 4-ST- 1804920 50 5 30.48 PC 4/ 5-ST- 1804933 50 6.10 PC 4/ 6-ST- 1804946 50 7 45.72 PC 4/ 7-ST- 1804959 50 8 53.34 PC 4/ 8-ST- 1804962 50 9 60.96 PC 4/ 9-ST- 1804975 50 10 68.58 PC 4/10-ST- 1804988 50 11 76.20 PC 4/11-ST- 1804991 50 12 83.82 PC 4/12-ST- 1805000 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 512 PHOENIX CONTACT

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm With screw flnge Dimensionl drwing 18,1 30,7 +7,6 14,7 Representtive derting curve Type: PC 4/..-ST- with PC 4/..-G- Note on PC 4 HV/...ST- As prt of ongoing product improvements, the PC 4 HV plug-in connector rnge hs been withdrwn. A replcement is vilble in the form of the PC 5-ST1 plug-in connector. This connector offers the sme spce but even better performnce dt. This plug-in connector is vilble in the sme version options nd cn be found from ctlog pge 524. Current crrying cpcity [A] 35 30 25 20 15 10 1 = 2-pos. 2 = 5-pos. 5 3 = 12-pos. 0 0 20 60 3 80 2 1 100 Ambient temperture [ C] Ordering dt Type Pcs. / Pkt. Pitch 7.62 mm, color: green PC 4/ 2-STF- 1828249 50 PC 4/ 3-STF- 1828252 50 PC 4/ 4-STF- 1828265 50 PC 4/ 5-STF- 1828278 50 PC 4/ 6-STF- 1828281 50 PC 4/ 7-STF- 1828294 50 PC 4/ 8-STF- 1828304 50 PC 4/ 9-STF- 1828317 50 PC 4/10-STF- 1828320 50 PC 4/11-STF- 1828333 50 PC 4/12-STF- 1827583 50 Type: PC 5-ST1 with PC 4-G (4 mm 2 ) 56 48 32 24 16 1 = 2-pos. 2 = 5-pos. 3 8 3 = 12-pos. 0 0 20 60 Current crrying cpcity [A] Representtive derting curve 2 80 1 100 Ambient temperture [ C] Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 513

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Plugs with screw nd crimp connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Plugs for crimp contcts Low height of the PCC 4 series Plug-in direction prllel to the conductor xis Ltching option for pull-out id Comptible with PC 4 heders for PCB nd PCVK 4- nd UPCV3K heders for DIN ril mounting Crimp contcts vilble loose nd on tpe STG-MTN 0,5-1,0 for conductor cross sections from 0.5 to 1.0 mm 2 (AWG 20-18) STG-MTN 1,5-2,5 for conductor cross sections from 1.5 to 2.5 mm 2 (16-14 AWG) Accessories For ll types Type Pge Module socket contct, 0.5 to 2.5 mm 2 STG-MTN... 827 Crimping pliers for 0.5 to 2.5 mm 2 CRIMPFOX MT 2,5 120 Contct removl tool STG-EW 3190441 Pullout id STZ...-PCC 4- Coding profile CP-HCC 4 1600027 Mrker crds SK /3,8 828 799 17,2 Current strength [A] 14,7 28,7 36 32 28 24 20 16 12 1 = 2-pos. 8 2 = 5-pos. 4 3 = 12-pos. 0 0 20 Dimensionl drwing 3 60 1 2 80 +7,57 Representtive derting curve Type: PCC 4/...-ST- with PC 4/...-G- 100 Ambient temperture [ C] Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 20 1 ) / 4 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG - / 0.5-2.5 / 20-14 Strnded with ferrules without plstic sleeve [mm 2 ] - Strnded with ferrules with plstic sleeve [mm 2 ] - Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] - /- Strnded with ferrules without plstic sleeve [mm 2 ] - Strnded with TWIN ferrule with plstic sleeve [mm 2 ] - Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 0 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 10 10 - Connection cpcity AWG AWG 20-14 20-14 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] 300 300 - Nominl current [A] 10 10 - Connection cpcity AWG AWG 20-14 20-14 - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 PCC 4/ 2-ST- 18191 50 3 15.24 PCC 4/ 3-ST- 18188 50 4 22.86 PCC 4/ 4-ST- 18175 50 5 30.48 PCC 4/ 5-ST- 18162 50 6.10 PCC 4/ 6-ST- 18159 50 7 45.72 PCC 4/ 7-ST- 18146 50 8 53.34 PCC 4/ 8-ST- 18133 50 9 60.96 PCC 4/ 9-ST- 18120 50 10 68.58 PCC 4/10-ST- 18117 50 11 76.20 PCC 4/11-ST- 18104 50 12 83.82 PCC 4/12-ST- 18094 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 514 PHOENIX CONTACT

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 515

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Heders with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. Mounting screw for PC(V) 4-G- with BF-PC 4: sheet metl screw ISO 1481-ST 2,9x9,5 C. Screw connection only permitted prior to soldering. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. 2) Insultion mteril/insultion mteril clss for the 10-, 11- nd 12-pos. versions: PBT/III Horizontl PC 4 heders for use in combintion with ll PC 4 plugs Horizontl nd verticl (PCV) versions vilble with 2 to 12-pos. Vibrtion-resistnt connection with seprte mounting flnge BF-PC 4 (lso for screw connection in the device) Shroud PCB-SHIELD for professionl EMC shield connection CP-PC RD coding profile s protection ginst mismting For ll types Type Pge Mounting flnge for lterl snpping on BF-PC 4 1827570 Coding profile CP-PC RD 1701967 Only for PC 4/...-G- Accessories Mrker crds SK /3,8 Shroud POWER COMBICON PCB-SHIELD 19687 799 Dimensionl drwing 5 18 3,52 2 45 29 +7,6 2 3,8 Drilling digrm 3,2 1,3 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 20 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 0 630 630 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 - Nominl current [A] 20 20 - Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] 300 300 - Nominl current [A] 20 20 - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I 2 ) Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.3 / 1 x 0.8 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 PC 4/ 2-G- 1804797 50 3 15.24 PC 4/ 3-G- 1804807 50 4 22.86 PC 4/ 4-G- 1804810 50 5 30.48 PC 4/ 5-G- 1804823 50 6.10 PC 4/ 6-G- 1804836 50 7 45.72 PC 4/ 7-G- 1804849 50 8 53.34 PC 4/ 8-G- 1804852 50 9 60.96 PC 4/ 9-G- 1804865 50 10 68.58 PC 4/10-G- 1804878 50 11 76.20 PC 4/11-G- 1804881 50 12 83.82 PC 4/12-G- 1804894 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 516 PHOENIX CONTACT

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Verticl Dimensionl drwing 18 +7,6 5 29 45 14,3 3,8 Drilling digrm 2,6 3,81 3,2 1,3 Ordering dt Type Pcs. / Pkt. Pitch 7.62 mm, color: green PCV 4/ 2-G- 1804687 50 PCV 4/ 3-G- 1804690 50 PCV 4/ 4-G- 1804700 50 PCV 4/ 5-G- 1804713 50 PCV 4/ 6-G- 1804726 50 PCV 4/ 7-G- 1804739 50 PCV 4/ 8-G- 1804742 50 PCV 4/ 9-G- 1804755 50 PCV 4/10-G- 1804768 50 PCV 4/11-G- 1804771 50 PCV 4/12-G- 1804784 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 517

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Feed-through heder with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. The cutout dimensions for the feed-through versions cn be found on pge 595. Derting curves ccording to DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 4 mm² Reduction fctor = 0.8 No. of positions: See digrm 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. With screw connection on the inside of the device Feed-through connectors for wll thicknesses from 1 to 5 mm Cn be plugged onto PC 4 nd PC 5 connectors A screw connection on the inside of the device Lterl mounting flnge (screw set, refer to ccessories) Cn be mounted either from outside or pre-wired nd mounted from inside Accessories For ll types Type Pge One screw set M3 x 10 mm DFK-MSTB-SS 0708263 Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 Screwdriver SZS 0,6 x 3,5 1205053 799 30,5 26,3 Current crrying cpcity [A] 35 30 6 32 25 20 15 10 1 = 2-pos. 2 = 5-pos. 5 3 = 12-pos. 0 0 20 Dimensionl drwing 3,95 60 3 80 +29,24 Representtive derting curve Type: PC 4/...-ST- with DFK-PC 4/...-GF- 1 2 100 Ambient temperture [ C] Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 20 1 ) / 4 Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-4 / 0.2-4 / 24-10 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-4 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-2.5 / 0.2-2.5 Strnded with ferrules without plstic sleeve [mm 2 ] 0.2-1.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-2.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 0 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 35 35 5 Connection cpcity AWG AWG 30-10 30-10 30-10 Approvl dt (CSA) Use Group B C D Nominl voltge [V] 300 300 - Nominl current [A] 20 20 - Connection cpcity AWG AWG 28-10 28-10 - Generl dt Stripping length [mm] 7 Screw thred M3 Tightening torque [Nm] 0.5-0.6 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 DFK-PC 4/ 2-GF- 18557 50 3 15.24 DFK-PC 4/ 3-GF- 18560 50 4 22.86 DFK-PC 4/ 4-GF- 18573 50 5 30.48 DFK-PC 4/ 5-GF- 18586 50 6.10 DFK-PC 4/ 6-GF- 18599 50 7 45.72 DFK-PC 4/ 7-GF- 18609 50 8 53.34 DFK-PC 4/ 8-GF- 18612 50 9 60.96 DFK-PC 4/ 9-GF- 18625 50 10 68.58 DFK-PC 4/10-GF- 186 50 11 76.20 DFK-PC 4/11-GF- 18641 50 12 83.82 DFK-PC 4/12-GF- 18654 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 518 PHOENIX CONTACT

Feed-through heder with pin contct Plug-in connectors for power electronics with 5.0 to 15.0 mm pitch Notes: PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. The cutout dimensions for the feed-through versions cn be found on pge 595. Derting curves ccording to DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 2.5 mm 2 Reduction fctor = 0.8 No. of positions: See digrm 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. With slip-on connection on the inside of the device Feed-through connectors for wll thicknesses from 1 to 5 mm Cn be plugged onto PC 4 nd PC 5 connectors Slip-on connection on the inside of the device (solder connection on request) Lterl mounting flnge (screw set, refer to ccessories) Accessories For ll types Type Pge One screw set M3 x 10 mm DFK-MSTB-SS 0708263 Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 Screwdriver SZS 0,6 x 3,5 1205053 799 14,3 Current crrying cpcity [A] 30 24 18 7,8 29 8,35 12 1 = 2-pos. 6 2 = 5-pos. 3 = 12-pos. 0 0 20 Dimensionl drwing 60 3 80 +22,84 Representtive derting curve Type: PC 4/..-ST- with DFK-PC 4/..-G--FS4,8 2 1 100 Ambient temperture [ C] Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 15 1 ) / 4 Rted insultion voltge for pollution degree 2 [V] 0 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 0 0 800 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 - Nominl current [A] 20 20 - Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] 300 300 - Nominl current [A] 20 20 - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V2 Slip-on connection (DIN 46249-1) [A]/[mm] - / 4.8 x 0.8 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 DFK-PC 4/ 2-G--FS4,8 1861154 50 3 15.24 DFK-PC 4/ 3-G--FS4,8 1861167 50 4 22.86 DFK-PC 4/ 4-G--FS4,8 1861170 50 5 30.48 DFK-PC 4/ 5-G--FS4,8 1861183 50 6.10 DFK-PC 4/ 6-G--FS4,8 1861196 50 7 45.72 DFK-PC 4/ 7-G--FS4,8 1861206 50 8 53.34 DFK-PC 4/ 8-G--FS4,8 1861219 50 9 60.96 DFK-PC 4/ 9-G--FS4,8 1861222 50 10 68.58 DFK-PC 4/10-G--FS4,8 1861235 50 11 76.20 DFK-PC 4/11-G--FS4,8 1861248 50 12 83.82 DFK-PC 4/12-G--FS4,8 1861251 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 519

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Heders with pin contct for DIN ril mounting Notes: COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. For DIN rils, see Ctlog 5. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. PCVK 4 nd UPCV3K 4 estblish the pluggble connection between the electronics nd the control cbinet For mounting on NS 35/... nd NS 15... DIN ril ccording to EN 60715 or for the UPCV3K 4-G- for mounting on NS 35/... nd NS 32 DIN ril Cn be plugged onto PC 4 nd PC 5 plug rnge Vibrtion-resistnt connection with flnge terminl blocks tht cn be ligned (-F) UPCV3K provides three connector outputs for ech terminl point Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZS 0,6 x 3,5 1205053 Zck mrker strip ZB 805 Representtive derting curve Type: PC 4/...-ST- with PCVK 4- DIN EN 61984 (VDE 0627):2002-09 Therml test group C Derting curve, representtion bsed on DIN EN 60512-5-2:2003-01 connected conductor cross section = 4 mm 2 Reduction fctor = 0.8 No. of positions: See digrm Current crrying cpcity [A] 35 30 25 20 15 10 1 = 2-pos. 2 = 5-pos. 5 3 = 12-pos. 0 0 20 60 3 80 1 2 100 Ambient temperture [ C] Technicl dt PCVK 4- PCVK 4--PE UPCV3K 4-G- Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 20 1 ) / 4 20 1 ) / 4 20 1 ) / 4 Rted insultion voltge for pollution degree 2 [V] 630 630 1000 Pitch [mm] 7.62 7.62 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-4 / 0.2-4 / 24-12 0.2-4 / 0.2-4 / 24-12 0.2-4 / 0.2-4 / 24-10 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-4 0.25-4 0.25-4 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 0.25-4 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.25-2.5 / 0.25-2.5 0.25-2.5 / 0.25-2.5 0.25-2.5 / 0.25-2.5 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1.5 0.25-1.5 0.25-1.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-2.5 0.5-2.5 0.5-2.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 III / 3 III / 2 II / 2 III / 3 III / 2 II / 2 Rted insultion voltge [V] 500 630 1000 500 630 1000 800 1000 1000 Rted surge voltge [kv] 6 6 6 6 6 6 8 8 8 Approvl dt (UL/CUL) Use Group B C D B C D B C D Nominl voltge [V] 300 300 600 - - - 300 300 600 Nominl current [A] 20 20 5 - - - 20 20 5 Connection cpcity AWG AWG 30-10 30-10 30-10 - - - 30-10 30-10 30-10 Approvl dt (CSA) Use Group B C D B C D B C D Nominl voltge [V] 300 300 - - - - - - - Nominl current [A] 20 20-20 20 - - - - Connection cpcity AWG AWG 28-10 28-10 - - - - - - - Generl dt Stripping length [mm] 10 10 10 Screw thred M3 M3 M3 Tightening torque [Nm] 0.5-0.6 0.5-0.6 0.5-0.6 Type of insultion mteril / insultion mteril group PA / I PA / I PA / I Inflmmbility clss ccording to UL 94 V0 V0 V0 No. of pos. 1 1 1 1 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 520 PHOENIX CONTACT

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Single terminl block Single terminl block s protective conductor Single terminl block with 3 plug entries Dimensionl drwing Dimensionl drwing Dimensionl drwing 41,2 42,4 74,4 36,4 36,4 48,7 46,2 41,2 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green PCVK 4-1849998 50 Flnge cover, fitted on the left nd right of PCVK 4- for relible screw connection of plugs with screw flnges, pitch: 7.62 mm, color: green PCVK 4--F 1850000 50 Pitch 7.62 mm, color: green-yellow PCVK 4--PE 1876246 50 Terminl block, with three verticl COMBICON (Power) connectors/exits, for mounting on NS 32 or NS 35 UPCV3K 4-G- 181 50 Flnge cover, fitted on the left nd right of UPCV3K 4-G- for relible screw connection with the plugs with screw flnges UPCV3K-F 1881202 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 521

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm Cble housing for PC 4 plug-in connectors Notes: COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 3-5 positions, with stright cble connection Accessories Dimensionl drwing Ergonomicl cble housing for the stndrd PC 4 connectors with screw connection 3 to 5-pos. nd 6 to 12-pos. housing versions re vilble with nd without mounting flnge (-F) KGG-PC 4 for cble dimeters from 4 to 13.5 mm 2 KGS-PC 4 (ngled cble outlet) for cble dimeters from 6 to 16 mm 2 A cble clmp cn be mounted bck to front For ll types Type Pge Trnsprent mrker crrier KGS-MSTB 2,5/DST 1784914 Mrker strips, unprinted, 10-section SBS 2,5/7,5 1007604 48 14,7 21 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] - / - Rted insultion voltge for pollution degree 2 [V] - Pitch [mm] 0 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] Rted surge voltge [kv] Generl dt Type of insultion mteril / insultion mteril group ABS / 0 Inflmmbility clss ccording to UL 94 HB Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 3 24.66 KGG-PC 4/ 3 1837227 10 4 32.28 KGG-PC 4/ 4 1837230 10 5 39.90 KGG-PC 4/ 5 1837243 10 6 47.52 7 55.14 8 62.76 9 70. 10 78.00 11 85.62 12 93.24 6 47.52 7 55.14 8 62.76 9 70.98 10 78.00 11 85.62 12 93.24 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 522 PHOENIX CONTACT

PC 4 series plug-in connectors up to 20 A/4 mm2, pitch 7.62 mm 3-15 positions, with stright cble outlet nd screw flnge 6-12 positions, with ngled cble connection 6-12 positions, with ngled cble connection nd screw flnge Dimensionl drwing Dimensionl drwing Dimensionl drwing 6,7 21 6,7 21 21 48 14,7 +5,82 14,7 62,7 14,7 62,7 +5,82 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green KGG-PC 4/ 3-F 1837324 10 KGG-PC 4/ 4-F 1837337 10 KGG-PC 4/ 5-F 18373 10 Pitch 7.62 mm, color: green KGS-PC 4/ 6 1837256 10 KGS-PC 4/ 7 1837269 10 KGS-PC 4/ 8 1837272 10 KGS-PC 4/ 9 1837285 10 KGS-PC 4/10 1837298 10 KGS-PC 4/11 1837308 10 KGS-PC 4/12 1837311 10 Pitch 7.62 mm, color: green KGS-PC 4/ 6-F 1837353 10 KGS-PC 4/ 7-F 1837366 10 KGS-PC 4/ 8-F 1837379 10 KGS-PC 4/ 9-F 18372 10 KGS-PC 4/10-F 1837395 10 KGS-PC 4/11-F 18375 10 KGS-PC 4/12-F 1837418 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 523

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Plugs with screw connection, pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. 2 ) Tightening torque for 4 mm 2 = 0.5 to 0.6 Nm Tightening torque for > 4 mm 2 = 0.7 to 0.8 Nm Without screw flnge, 600 V UL pprovl High-cpcity plugs with current crrying cpcity of 41 A nd connection cpcity of 6 mm 2, flexible/10 mm 2 solid Unrestricted 600-V-UL pprovl Mximum contct sfety, thnks to n integrted double steel spring An utomtic toolless snp-lock mechnism with the click nd lock system (-STCL); high degree of sfety lso in the cse of vibrtions Further fetures: Screw flnge (-STF) nd shield (-SH) CP-PC coding profile s protection ginst mismting Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 799 19,7 Dimensionl drwing 35,3 14,7 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Reduction fctor = 0.8 No. of positions: See digrm +7,57 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-10 / 0.2-6 / 24-10 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-2.5 / 0.2-4 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.25-2.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 41 41 - Connection cpcity AWG AWG 24-8 24-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 10 Screw thred M3 Tightening torque [Nm] 0.5-0.8 2 ) Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 PC 5/ 2-ST1-1777723 50 3 15.24 PC 5/ 3-ST1-1777736 50 4 22.86 PC 5/ 4-ST1-1777749 50 5 30.48 PC 5/ 5-ST1-1777752 50 6.10 PC 5/ 6-ST1-1777765 50 7 45.72 PC 5/ 7-ST1-1777778 50 8 53.34 PC 5/ 8-ST1-1777781 50 9 60.96 PC 5/ 9-ST1-1777794 50 10 68.58 PC 5/10-ST1-1777804 50 11 76.20 PC 5/11-ST1-1777817 50 12 83.82 PC 5/12-ST1-1777820 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 524 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With screw flnge, 600 V UL pprovl With screw flnge nd shield, 600 V UL pprovl With Click nd Lock system, comptible with PC 5 heders nd STGCL plug components, 600 V UL pprovl Dimensionl drwing Dimensionl drwing Dimensionl drwing 77,8 35,3 35,3 7,64 +7,57 14,7 35,3 4,1 +7,57 19,7 19,7 14,7 12,5 +22,84 14,7 Type: PC 5/...ST1- with PC 4/...-G- Conductor cross section: 4 mm 2 Current strength [A] 56 48 32 24 16 8 0 0 1 = 2-pos. 2 = 5-pos. 3 = 12-pos. 20 3 60 2 80 1 100 Ambient temperture [ C] Representtive derting curves of the bove-mentioned plugs Type: PC 5/...-ST1- with PC 5/...-G- Conductor cross section: 6 mm 2 Current strength [A] 64 56 48 32 24 16 8 0 0 1 = 2-pos. 2 = 5-pos. 3 = 12-pos. 20 3 60 1 2 80 100 Ambient temperture [ C] Type: PC 5/...-ST1- with PC 5/...-G- Conductor cross section: 10 mm 2 80 72 64 56 48 32 24 16 8 0 0 1 = 2-pos. 2 = 5-pos. 3 = 12-pos. Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green PC 5/ 2-STF1-1777833 50 PC 5/ 2-STF-SH1-1778175 50 PC 5/ 2-STCL1-1778065 50 PC 5/ 3-STF1-1777846 50 PC 5/ 3-STF-SH1-1778188 50 PC 5/ 3-STCL1-1778078 50 PC 5/ 4-STF1-1777859 50 PC 5/ 4-STF-SH1-1778191 50 PC 5/ 4-STCL1-1778081 50 PC 5/ 5-STF1-1777862 50 PC 5/ 5-STCL1-1778094 50 PC 5/ 6-STF1-1777875 50 PC 5/ 6-STCL1-1778104 50 PC 5/ 7-STF1-1777888 50 PC 5/ 7-STF-SH1-1778201 50 PC 5/ 7-STCL1-1778117 50 PC 5/ 8-STF1-1777891 50 PC 5/ 8-STCL1-1778120 50 PC 5/ 9-STF1-1777901 50 PC 5/ 9-STCL1-1778133 50 PC 5/10-STF1-1777914 50 PC 5/10-STCL1-1778146 50 PC 5/11-STF1-1777927 50 PC 5/11-STCL1-1778159 50 PC 5/12-STF1-1777930 50 PC 5/12-STCL1-1778162 50 Current strength [A] 20 3 60 1 2 80 100 Ambient temperture [ C] Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 525

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Plugs with screw connection, pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl Inverted IPC 5 plugs with pin contcts for touch-proof device outputs (with IPC 5 G) or free-hnging cble/cble connections Unrestricted 600-V-UL pprovl Cn be plugged into PC 5 plugs or inverted IPC 5 heders An utomtic snp-on mechnism without tools for cble-cble connections with the Click nd Lock system (-STGCL); high degree of sfety even in cse of vibrtions STGF plug with threded flnge Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZK PZ 1 1206450 Mrker crds SK /3,8 799 22,9 Dimensionl drwing 36,55 3,81 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Reduction fctor = 0.8 No. of positions: See digrm + Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-10 / 0.2-6 / 24-10 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-2.5 / 0.2-4 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.25-2.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 41 41 - Connection cpcity AWG AWG 24-8 24-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 10 Screw thred M3 Tightening torque [Nm] 0.7-0.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 IPC 5/ 2-ST- 1709047 50 3 15.24 IPC 5/ 3-ST- 1709050 50 4 22.86 IPC 5/ 4-ST- 1709063 50 5 30.48 IPC 5/ 5-ST- 1709076 50 6.10 IPC 5/ 6-ST- 1709089 50 7 45.72 IPC 5/ 7-ST- 1709092 50 8 53.34 IPC 5/ 8-ST- 1709102 50 9 60.96 IPC 5/ 9-ST- 1709115 50 10 68.58 IPC 5/10-ST- 1709128 50 11 76.20 IPC 5/11-ST- 1709131 50 12 83.82 IPC 5/12-ST- 1709144 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 526 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With screw flnge, 600 V UL pprovl With threded flnge, 600 V UL pprovl With Click nd Lock system, comptible with STCL plugs, 600 V UL pprovl Dimensionl drwing Dimensionl drwing Dimensionl drwing 36,55 + 36,55 + 36,55 1,4 + 22,9 22,9 22,9 5,21 Type: IPC 5/...-ST- with PC 5/...-ST1- Conductor cross section: 6 mm 2 Current strength [A] 64 56 48 32 24 16 8 0 0 1 = 2-pos. 2 = 5-pos. 3 = 12-pos. 20 3 60 80 1 2 100 Ambient temperture [ C] Representtive derting curves of the bove-mentioned plugs Type: IPC 5/...-ST- with IPC 5/...-G- Conductor cross section = 10 mm 2 80 70 60 50 30 20 1 = 2-pos. 3 10 2 = 5-pos. 3 = 12-pos. 0 0 20 60 Current crrying cpcity [A] 1 80 2 100 Ambient temperture [ C] Type: IPC 5/...-ST- with IPC 5/...-G- Conductor cross section 6 mm 2 64 56 48 2 32 24 16 1 = 2-pos. 3 8 2 = 5-pos. 3 = 12-pos. 0 0 20 60 80 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green IPC 5/ 2-STF- 1709157 50 IPC 5/ 2-STGF- 1709267 50 IPC 5/ 2-STGCL- 1718261 50 IPC 5/ 3-STF- 1709160 50 IPC 5/ 3-STGF- 1709270 50 IPC 5/ 3-STGCL- 1718274 50 IPC 5/ 4-STF- 1709173 50 IPC 5/ 4-STGF- 1709283 50 IPC 5/ 4-STGCL- 1718287 50 IPC 5/ 5-STF- 1709186 50 IPC 5/ 5-STGF- 1709296 50 IPC 5/ 5-STGCL- 1718290 50 IPC 5/ 6-STF- 1709199 50 IPC 5/ 6-STGF- 1709306 50 IPC 5/ 6-STGCL- 1718300 50 IPC 5/ 7-STF- 1709209 50 IPC 5/ 7-STGF- 1709319 50 IPC 5/ 7-STGCL- 1718313 50 IPC 5/ 8-STF- 1709212 50 IPC 5/ 8-STGF- 1709322 50 IPC 5/ 8-STGCL- 1718326 50 IPC 5/ 9-STF- 1709225 50 IPC 5/ 9-STGF- 1709335 50 IPC 5/ 9-STGCL- 1718339 50 IPC 5/10-STF- 17092 50 IPC 5/10-STGF- 1709348 50 IPC 5/10-STGCL- 1718342 50 IPC 5/11-STF- 1709241 50 IPC 5/11-STGF- 1709351 50 IPC 5/11-STGCL- 1718355 50 IPC 5/12-STF- 1709254 50 IPC 5/12-STGF- 1709364 50 IPC 5/12-STGCL- 1718368 50 Current crrying cpcity [A] 1 100 Ambient temperture [ C] Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 527

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Plugs with screw connection, pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. With screw flnge nd shield, 600 V UL pprovl The SH versions provide professionl EMC shield for dherence to the EMC requirements nd n optionl strin relief Unrestricted 600-V-UL pprovl Cn be plugged into PC 5 plugs or inverted IPC 5 heders Incresed vibrtion protection for cble/cble connections, thnks to screwon STGF plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZK PZ 1 1206450 Mrker crds SK /3,8 799 12,5 Dimensionl drwing 64 36,55 Note derting curves Derting curves ccording to DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Number of positions = see digrm 45,7 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 4 22.86 IPC 5/ 4-STF-SH- 17090 50 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-10 / 0.2-6 / 24-10 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-2.5 / 0.2-4 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.25-2.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 41 41 - Connection cpcity AWG AWG 24-8 24-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 10 Screw thred M3 Tightening torque [Nm] 0.7-0.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 528 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With threded flnge nd shield, 600 V UL pprovl Dimensionl drwing 64 36,55 12,5 45,7 Current strength [A] 64 56 48 32 24 16 8 0 0 Representtive derting curve Type: IPC 5/...-ST- with PC 5/...-ST1- Conductor cross section: 6 mm 2 1 = 2-pos. 2 = 5-pos. 3 = 12-pos. 20 3 60 80 1 2 100 Ambient temperture [ C] Ordering dt Type Pcs. / Pkt. Pitch 7.62 mm, color: green IPC 5/ 4-STGF-SH- 1709377 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 529

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Plugs with push-in spring connection, pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl Push-in spring connection with current crrying cpcity of 41 A Fst connection technology, thnks to principle of direct plug-in without tools Unrestricted 600-V-UL pprovl Mximum contct sfety, thnks to n integrted double steel spring An utomtic snp-on mechnism without tools with the Click nd Lock system (-STCL); high degree of sfety even in cse of vibrtions The SH versions provide professionl shield nd n optionl strin relief CP-PC RD coding profile Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZF 1-0,6 x 3,5 1204517 Mrker crds SK /3,8 Ferrules with nd without plstic sleeve Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 799 834 19,8 Dimensionl drwing,5 14,7 3,81 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Reduction fctor = 0.8 No. of positions: See digrm + Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-10 / 0.2-6 / 24-8 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] - /- Strnded with ferrules without plstic sleeve [mm 2 ] - Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.25-1.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 35 35 - Connection cpcity AWG AWG 24-8 24-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 15 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 SPC 5/ 2-ST- 1996016 50 3 15.24 SPC 5/ 3-ST- 1996029 50 4 22.86 SPC 5/ 4-ST- 1996032 50 5 30.48 SPC 5/ 5-ST- 1996045 50 6.10 SPC 5/ 6-ST- 1996058 50 7 45.72 SPC 5/ 7-ST- 1996061 50 8 53.34 SPC 5/ 8-ST- 1996074 50 9 60.96 SPC 5/ 9-ST- 1996087 50 10 68.58 SPC 5/10-ST- 1996090 50 11 76.20 SPC 5/11-ST- 1996100 50 12 83.82 SPC 5/12-ST- 1996113 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 530 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With screw flnge, 600 V UL pprovl With screw flnge nd shield, 600 V UL pprovl With Click nd Lock system, comptible with PC 5 heders nd STGCL plug components, 600 V UL pprovl Dimensionl drwing Dimensionl drwing Dimensionl drwing 78,7,5,5 7,61 + 14,7,5 4 + 19,8 19,8 14,7 12,5 45,7 14,7 3,81 Current crrying cpcity [A] 70 60 50 30 20 1 = 2-pos. 10 2 = 5-pos. 3 = 12-pos. 0 0 20 Representtive derting curves of the bove-mentioned plugs Type: SPC 5/...-ST- with PC 5/...-G- Conductor cross section: 10 mm 2 3 60 2 80 1 100 Ambient temperture [ C] Type: SPC 5/...-ST- with PC 5/...-G- Conductor cross section: 6 mm 2 64 56 48 32 24 16 1 = 2-pos. 3 8 2 = 5-pos. 3 = 12-pos. 0 0 20 60 Current crrying cpcity [A] Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green SPC 5/ 2-STF- 1996126 50 SPC 5/ 2-STCL- 1718481 50 SPC 5/ 3-STF- 1996139 50 SPC 5/ 3-STCL- 1718494 50 SPC 5/ 4-STF- 1996142 50 SPC 5/ 4-STF-SH- 17071 50 SPC 5/ 4-STCL- 1718504 50 SPC 5/ 5-STF- 1996155 50 SPC 5/ 5-STCL- 1718517 50 SPC 5/ 6-STF- 1996168 50 SPC 5/ 6-STCL- 1718520 50 SPC 5/ 7-STF- 1996171 50 SPC 5/ 7-STCL- 1718533 50 SPC 5/ 8-STF- 1996184 50 SPC 5/ 8-STCL- 1718546 50 SPC 5/ 9-STF- 1996197 50 SPC 5/ 9-STCL- 1718559 50 SPC 5/10-STF- 1996207 50 SPC 5/10-STCL- 1718562 50 SPC 5/11-STF- 1996210 50 SPC 5/11-STCL- 1718575 50 SPC 5/12-STF- 1996223 50 SPC 5/12-STCL- 1718588 50 1 80 2 100 Ambient temperture [ C] Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 531

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Plugs with push-in spring connection, pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl Push-in spring connection with TWIN connection Simple potentil distribution through two terminl points per contct Fst connection technology, thnks to principle of direct plug-in without tools Unrestricted 600-V-UL pprovl Mximum contct sfety, thnks to n integrted double steel spring An utomtic snp-on mechnism without tools with the Click nd Lock system (-STCL); high degree of sfety even in cse of vibrtions Further fetures: screw flnge (-STF) CP-PC RD coding profile Accessories For ll types Type Pge Screwdriver SZF 1-0,6 x 3,5 1204517 Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 Ferrules with nd without plstic sleeve Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 799 834 35,05 Dimensionl drwing 41,45 14,7 3,81 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 10 mm 2 Reduction fctor = 0.8 Number of positions = see digrm + Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-10 / 0.2-6 / 24-8 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] - /- Strnded with ferrules without plstic sleeve [mm 2 ] - Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.25-1.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 31 31 - Connection cpcity AWG AWG 24-8 24-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 15 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 TSPC 5/ 2-ST- 1728455 50 3 15.24 TSPC 5/ 3-ST- 1728468 50 4 22.86 TSPC 5/ 4-ST- 1728471 50 5 30.48 TSPC 5/ 5-ST- 1728484 50 6.10 TSPC 5/ 6-ST- 1728497 25 7 45.72 TSPC 5/ 7-ST- 1728507 25 8 53.34 TSPC 5/ 8-ST- 1728510 25 9 60.96 TSPC 5/ 9-ST- 1728523 25 10 68.58 TSPC 5/10-ST- 1728536 25 11 76.20 TSPC 5/11-ST- 1728549 25 12 83.82 TSPC 5/12-ST- 1728552 25 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 532 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With screw flnge, 600 V UL pprovl With Click nd Lock system, comptible with PC 5 heders nd STGCL plug components, 600 V UL pprovl Dimensionl drwing Dimensionl drwing 41,45 7,61 + 41,45 4 + 35,05 35,05 14,7 14,7 3,81 Representtive derting curve Type: TSPC 5/...-ST- with PC 5/...-G- Current crrying cpcity [A] 70 60 50 30 20 1 = 2-pos. 10 2 = 5-pos. 3 = 12-pos. 0 0 20 3 60 1 80 2 100 Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green TSPC 5/ 2-STF- 1728206 50 TSPC 5/ 2-STCL- 1765418 10 TSPC 5/ 3-STF- 1728219 50 TSPC 5/ 3-STCL- 1765421 10 TSPC 5/ 4-STF- 1728222 50 TSPC 5/ 4-STCL- 1765434 10 TSPC 5/ 5-STF- 1728235 50 TSPC 5/ 5-STCL- 1765447 10 TSPC 5/ 6-STF- 1728248 25 TSPC 5/ 6-STCL- 1765450 10 TSPC 5/ 7-STF- 1728251 25 TSPC 5/ 7-STCL- 1765463 10 TSPC 5/ 8-STF- 1728264 25 TSPC 5/ 8-STCL- 1765476 10 TSPC 5/ 9-STF- 1728277 25 TSPC 5/ 9-STCL- 1765489 10 TSPC 5/10-STF- 1728280 25 TSPC 5/10-STCL- 1765492 10 TSPC 5/11-STF- 1728293 25 TSPC 5/11-STCL- 1765502 10 TSPC 5/12-STF- 1728303 25 TSPC 5/12-STCL- 1765515 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 533

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Plugs with push-in spring connection, pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. With Click nd Lock system, comptible with STCL plugs, 600 V UL pprovl Inverted ISPC 5 push-in spring connection plugs with pin contct for touchproof device outputs (with IPC 5 G) or free-hnging cble/cble connections (with SPC 5 ST) Unrestricted 600-V-UL pprovl Incresed vibrtion protection, thnks to screw-on STF plug with screw flnge STGF plug with threded flnge Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZF 1-0,6 x 3,5 1204517 Mrker crds SK /3,8 Ferrules with nd without plstic sleeve Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 799 834 19,8 Dimensionl drwing,5 1,4 5,21 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 6 mm 2 Reduction fctor = 0.8 Number of positions = see digrm +10,42 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-10 / 0.2-6 / 24-8 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] - /- Strnded with ferrules without plstic sleeve [mm 2 ] - Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.25-1.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 35 35 - Connection cpcity AWG AWG 24-8 24-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 15 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 ISPC 5/ 2-STGCL- 1748862 50 3 15.24 ISPC 5/ 3-STGCL- 1748875 50 4 22.86 ISPC 5/ 4-STGCL- 1748888 50 5 30.48 ISPC 5/ 5-STGCL- 1748891 50 6.10 ISPC 5/ 6-STGCL- 1748901 50 7 45.72 ISPC 5/ 7-STGCL- 1748914 50 8 53.34 ISPC 5/ 8-STGCL- 1748927 50 9 60.96 ISPC 5/ 9-STGCL- 1748930 50 10 68.58 ISPC 5/10-STGCL- 1748943 50 11 76.20 ISPC 5/11-STGCL- 1748956 50 12 83.82 ISPC 5/12-STGCL- 1748969 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 534 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With screw flnge, 600 V UL pprovl With threded flnge, 600 V UL pprovl Dimensionl drwing Dimensionl drwing,5 +10,42,5 +10,42 19,8 19,8 Representtive derting curves of the bove-mentioned plugs Type: ISPC 5/...-STGCL- with IPC 5/...-G- Type: ISPC 5/...-STGCL- with IPCV 5/...-G- Type: ISPC 5/...-STGCL- with SPC 5/...-ST- Current crrying cpcity [A] 64 56 48 32 24 16 1 = 2-pos. 2 = 5-pos. 8 3 = 12-pos. 0 0 20 3 60 2 80 1 100 Current crrying cpcity [A] 64 56 48 32 24 16 1 = 2-pos. 2 = 5-pos. 8 3 = 12-pos. 0 0 20 3 60 2 80 1 100 Current crrying cpcity [A] 64 56 48 32 24 16 1 = 2-pos. 2 = 5-pos. 8 3 = 12-pos. 0 0 20 3 60 2 80 1 100 Ambient temperture [ C] Ambient temperture [ C] Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green ISPC 5/ 2-STF- 1748972 50 ISPC 5/ 2-STGF- 1749201 50 ISPC 5/ 3-STF- 1748985 50 ISPC 5/ 3-STGF- 1749214 50 ISPC 5/ 4-STF- 1748998 50 ISPC 5/ 4-STGF- 1749227 50 ISPC 5/ 5-STF- 1749007 50 ISPC 5/ 5-STGF- 1749230 50 ISPC 5/ 6-STF- 1749010 50 ISPC 5/ 6-STGF- 1749243 50 ISPC 5/ 7-STF- 1749023 50 ISPC 5/ 7-STGF- 1749256 50 ISPC 5/ 8-STF- 1749036 50 ISPC 5/ 8-STGF- 1749269 50 ISPC 5/ 9-STF- 1749049 50 ISPC 5/ 9-STGF- 1749272 50 ISPC 5/10-STF- 1749052 50 ISPC 5/10-STGF- 1749285 50 ISPC 5/11-STF- 1749065 50 ISPC 5/11-STGF- 1749298 50 ISPC 5/12-STF- 1749078 50 ISPC 5/12-STGF- 1749308 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 535

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Heders with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. Mounting screw for PC 5/...-GF- nd PC 5/...-GFU-: sheet metl screw ISO 1481-ST 2,9 C. Screw connection only permitted prior to soldering. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Comptible with STCL plugs PC 5 heders for use in combintion with PC 5 plugs If the GU heders re used, the plug is rotted by 180 before fitting Vibrtion-resistnt connection with threded flnge (-GF; lso for screw connection in the device) Comptible with the Click nd Lock system Shroud PCB-SHIELD for professionl EMC shield connection CP-PC RD coding profile s protection ginst mismting Suitble for 600 V UL when used in combintion with PC 5 screw or springcge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 Only for PC 5/...-G- nd PC 5/...-GU- Shroud POWER COMBICON PCB-SHIELD 19687 799 Dimensionl drwing 5 14,29 29,25 5,08 13,54 1,83 Drilling digrm 5,21 +10,42 5,08 1,83 1,3 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 41 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 630 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 150 300 Nominl current [A] 41 41 10 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.3 / 0.8 x 1.0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 PC 5/ 2-G- 1720466 50 3 15.24 PC 5/ 3-G- 1720479 50 4 22.86 PC 5/ 4-G- 1720482 50 5 30.48 PC 5/ 5-G- 1720495 50 6.10 PC 5/ 6-G- 1720505 50 7 45.72 PC 5/ 7-G- 1720518 50 8 53.34 PC 5/ 8-G- 1720521 50 9 60.96 PC 5/ 9-G- 1720534 50 10 68.58 PC 5/10-G- 1720547 50 11 76.20 PC 5/11-G- 1720550 50 12 83.82 PC 5/12-G- 1720563 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 536 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With threded flnge Rotted 180, comptible with STCL plugs Rotted 180, with threded flnge Dimensionl drwing Dimensionl drwing Dimensionl drwing 14,29 29,25 13,54 +23,72 4,2 5,08 1,83 4,2 5,08 1,83 5 5,08 1,83 13,54 11,86 5,21 8,06 8,06 11,86 5,08 12,25 5,08 5,08 12,25 1,83 1,83 1,3 1,83 29,25 +10,42 13,54 29,25 +23,72 Drilling digrm Drilling digrm Drilling digrm 3,2 1,3 3,2 1,3 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green PC 5/ 2-GF- 1720796 50 PC 5/ 2-GU- 1720686 50 PC 5/ 2-GFU- 1721012 50 PC 5/ 3-GF- 1720806 50 PC 5/ 3-GU- 1720699 50 PC 5/ 3-GFU- 1721025 50 PC 5/ 4-GF- 1720819 50 PC 5/ 4-GU- 1720709 50 PC 5/ 4-GFU- 17210 50 PC 5/ 5-GF- 1720822 50 PC 5/ 5-GU- 1720712 50 PC 5/ 5-GFU- 1721041 50 PC 5/ 6-GF- 1720835 50 PC 5/ 6-GU- 1720725 50 PC 5/ 6-GFU- 1721054 50 PC 5/ 7-GF- 1720848 50 PC 5/ 7-GU- 17207 50 PC 5/ 7-GFU- 1721067 50 PC 5/ 8-GF- 1720851 50 PC 5/ 8-GU- 1720741 50 PC 5/ 8-GFU- 1721070 50 PC 5/ 9-GF- 1720864 50 PC 5/ 9-GU- 1720754 50 PC 5/ 9-GFU- 1721083 50 PC 5/10-GF- 1720877 50 PC 5/10-GU- 1720767 50 PC 5/10-GFU- 1721096 50 PC 5/11-GF- 1720880 50 PC 5/11-GU- 1720770 50 PC 5/11-GFU- 1721106 50 PC 5/12-GF- 1720893 50 PC 5/12-GU- 1720783 50 PC 5/12-GFU- 1721119 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 537

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Heders with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. Mounting screw for PCV 5/...-GF-: sheet metl screw ISO 1481-ST 2,9 C. Screw connection only permitted prior to soldering. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Comptible with STCL plugs Accessories Dimensionl drwing Verticl PC 5 heders for use in combintion with PC 5 plugs Avilble with 2 to 12-pos. Vibrtion-resistnt connection with threded flnge (-GF; lso for screw connection in the device) Comptible with the Click nd Lock system Asymmetricl lyout of solder pins to void incorrect plugging-in Suitble for 600 V UL when used in combintion with PC 5 screw or springcge plugs For ll types Type Pge Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 799 5 29,25 5,21 3,4 5,08 1,3 3,4 13,54 +10,42 2,54 5,21 Drilling digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 41 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 630 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 150 300 Nominl current [A] 41 41 10 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.3 / 0.8 x 1.0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 PCV 5/ 2-G- 1720576 50 3 15.24 PCV 5/ 3-G- 1720589 50 4 22.86 PCV 5/ 4-G- 1720592 50 5 30.48 PCV 5/ 5-G- 1720602 50 6.10 PCV 5/ 6-G- 1720615 50 7 45.72 PCV 5/ 7-G- 1720628 50 8 53.34 PCV 5/ 8-G- 1720631 50 9 60.96 PCV 5/ 9-G- 1720644 50 10 68.58 PCV 5/10-G- 1720657 50 11 76.20 PCV 5/11-G- 1720660 50 12 83.82 PCV 5/12-G- 1720673 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 5 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With threded flnge Dimensionl drwing 13,54 +23,72 3,4 2,54 8,06 11,86 8,06 11,86 7,14 3,4 5,08 5 29,25 Drilling digrm 1,3 3,2 Ordering dt Type Pcs. / Pkt. Pitch 7.62 mm, color: green PCV 5/ 2-GF- 1720903 50 PCV 5/ 3-GF- 1720916 50 PCV 5/ 4-GF- 1720929 50 PCV 5/ 5-GF- 1720932 50 PCV 5/ 6-GF- 1720945 50 PCV 5/ 7-GF- 1720958 50 PCV 5/ 8-GF- 1720961 50 PCV 5/ 9-GF- 1720974 50 PCV 5/10-GF- 1720987 50 PCV 5/11-GF- 1720990 50 PCV 5/12-GF- 1721009 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 539

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Heders with socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge Accessories Dimensionl drwing An inverted IPC 5 heder to implement touch-proof PCB output or PCB- PCB connection (in combintion with PC 5 bse strips) Mximum contct sfety, thnks to n integrted double steel spring GU versions for solder-in direction rotted by 180 Shroud PCB-SHIELD for professionl EMC shield connection Suitble for 600 V UL when used in combintion with IPC 5 screw nd spring-cge plugs For ll types Type Pge Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 Only for IPC 5/...-G- nd IPC 5/...-GU- Shroud POWER COMBICON PCB-SHIELD 19687 799 5 12,8 2,58 3,81 5,08 1,3 30,1 14,7 + 5,08 2,58 3,81 Drilling digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 41 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 630 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 41 41 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.3 / 1.2 x 0.8 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 IPC 5/ 2-G- 17081 50 3 15.24 IPC 5/ 3-G- 1708394 50 4 22.86 IPC 5/ 4-G- 17084 50 5 30.48 IPC 5/ 5-G- 1708417 50 6.10 IPC 5/ 6-G- 1708420 50 7 45.72 IPC 5/ 7-G- 1708433 50 8 53.34 IPC 5/ 8-G- 1708446 50 9 60.96 IPC 5/ 9-G- 1708459 50 10 69.58 IPC 5/10-G- 1708462 50 11 76.20 IPC 5/11-G- 1708475 50 12 83.82 IPC 5/12-G- 1708488 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 5 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With threded flnge Rotted 180, without threded flnge Rotted 180, with threded flnge Dimensionl drwing Dimensionl drwing Dimensionl drwing 14,7 30,1 7,6 + 5,08 2,58 3,81 5,08 2,58 3,81 3,81 3,81 5,08 5,08 5,08 1,3 1,3 1,3 2,58 2,58 2,58 5 12,8 12,8 5 12,8 5 5,08 2,58 14,7 30,1 + 14,7 30,1 7,6 + Drilling digrm Drilling digrm Drilling digrm Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green IPC 5/ 2-GF- 1708491 50 IPC 5/ 2-GU- 1708608 50 IPC 5/ 2-GFU- 1708718 50 IPC 5/ 3-GF- 1708501 50 IPC 5/ 3-GU- 1708611 50 IPC 5/ 3-GFU- 1708721 50 IPC 5/ 4-GF- 1708514 50 IPC 5/ 4-GU- 1708624 50 IPC 5/ 4-GFU- 1708734 50 IPC 5/ 5-GF- 1708527 50 IPC 5/ 5-GU- 1708637 50 IPC 5/ 5-GFU- 1708747 50 IPC 5/ 6-GF- 1708530 50 IPC 5/ 6-GU- 17086 50 IPC 5/ 6-GFU- 1708750 50 IPC 5/ 7-GF- 1708543 50 IPC 5/ 7-GU- 1708653 50 IPC 5/ 7-GFU- 1708763 50 IPC 5/ 8-GF- 1708556 50 IPC 5/ 8-GU- 1708666 50 IPC 5/ 8-GFU- 1708776 50 IPC 5/ 9-GF- 1708569 50 IPC 5/ 9-GU- 1708679 50 IPC 5/ 9-GFU- 1708789 50 IPC 5/10-GF- 1708572 50 IPC 5/10-GU- 1708682 50 IPC 5/10-GFU- 1708792 50 IPC 5/11-GF- 1708585 50 IPC 5/11-GU- 1708695 50 IPC 5/11-GFU- 1708802 50 IPC 5/12-GF- 1708598 50 IPC 5/12-GU- 1708705 50 IPC 5/12-GFU- 1708815 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 541

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Heders with socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge Accessories Dimensionl drwing An inverted IPC 5 heder in verticl design to implement touch-proof PCB output or PCB-PCB connection (in combintion with PC 5 bse strips) Mximum contct sfety, thnks to n integrted double steel spring Asymmetricl lyout of solder pins to void incorrect plugging-in Threded flnge -GF Suitble for 600 V UL when used in combintion with IPC 5 screw nd spring-cge plugs For ll types Type Pge Coding profile CP-PC RD 1701967 Mrker crds SK /3,8 799 5 30,1 3,81 2,54 2,6 14,7 12,8 + 2,54 2,6 3,81 Drilling digrm 1,3 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 41 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 630 630 1000 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 41 41 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.3 / 1.2 x 0.8 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 IPCV 5/ 2-G- 1708828 50 3 15.24 IPCV 5/ 3-G- 1708831 50 4 22.86 IPCV 5/ 4-G- 1708844 50 5 30.48 IPCV 5/ 5-G- 1708857 50 6.10 IPCV 5/ 6-G- 1708860 50 7 45.72 IPCV 5/ 7-G- 1708873 50 8 53.34 IPCV 5/ 8-G- 1708886 50 9 60.96 IPCV 5/ 9-G- 1708899 50 10 68.58 IPCV 5/10-G- 1708909 50 11 76.20 IPCV 5/11-G- 1708912 50 12 83.82 IPCV 5/12-G- 1708925 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 542 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With threded flnge Dimensionl drwing 12,8 7,61 + 11,42 2,54 2,6 5 30,1 14,7 2,54 2,6 Drilling digrm 1,3 Ordering dt Type Pcs. / Pkt. Pitch 7.62 mm, color: green IPCV 5/ 2-GF- 17089 50 IPCV 5/ 3-GF- 1708941 50 IPCV 5/ 4-GF- 1708954 50 IPCV 5/ 5-GF- 1708967 50 IPCV 5/ 6-GF- 1708970 50 IPCV 5/ 7-GF- 1708983 50 IPCV 5/ 8-GF- 1708996 50 IPCV 5/ 9-GF- 1709005 50 IPCV 5/10-GF- 1709018 50 IPCV 5/11-GF- 1709021 50 IPCV 5/12-GF- 1709034 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 543

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Feed-through heder with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Comptible with STCL plugs Feed-through heders for use in combintion with ll PC 5 plugs To solder onto the PCB Mounting on the housing wll using the snp-lock mechnism to be operted without tools or the clssicl screw connection Wll thicknesses from 1 mm to 3 mm In GF versions, shielding functions cn be executed on the housing wll If the GU heders re used, the plug is rotted by 180 before fitting Suitble for 600 V UL when used in combintion with PC 5 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Mrker crds SK /3,8 799 Dimensionl drwing 12,4 29,25 19,54 5 5,08 1,83 Drilling digrm 16,56 +33,12 +27,12 5,08 1,83 1,3 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 41 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 500 630 800 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 150 300 Nominl current [A] 41 41 10 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.3 / 0.8 x 1.0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 DFK-PC 5/ 2-G- 1727582 10 3 15.24 DFK-PC 5/ 3-G- 1727595 10 4 22.86 DFK-PC 5/ 4-G- 1727605 10 5 30.48 DFK-PC 5/ 5-G- 1727618 10 6.10 DFK-PC 5/ 6-G- 1727621 10 7 45.72 DFK-PC 5/ 7-G- 1727634 10 8 53.34 DFK-PC 5/ 8-G- 1727647 10 9 60.96 DFK-PC 5/ 9-G- 1727650 10 10 68.58 DFK-PC 5/10-G- 1727663 10 11 76.20 DFK-PC 5/11-G- 1727676 10 12 83.82 DFK-PC 5/12-G- 1727689 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 544 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With threded flnge nd shield connection on the front of the device Rotted 180, comptible with STCL plugs Rotted 180, threded flnge, shield connection on the front of the device Dimensionl drwing Dimensionl drwing Dimensionl drwing 12,4 29,25 +42,24 +36,24 5,08 +33,12 +27,12 1,83 5,08 +42,24 +36,24 5,08 1,83 21,12 16,56 21,12 5,08 5,08 5,08 1,83 1,3 1,83 1,3 1,83 1,3 19,54 5 19,54 4,2 19,54 4,2 12,4 29,25 12,4 29,25 Drilling digrm Drilling digrm Drilling digrm Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green DFK-PC 5/ 2-GF- 1727692 10 DFK-PC 5/ 2-GU- 1727809 10 DFK-PC 5/ 2-GFU- 1727919 10 DFK-PC 5/ 3-GF- 1727702 10 DFK-PC 5/ 3-GU- 1727812 10 DFK-PC 5/ 3-GFU- 1727922 10 DFK-PC 5/ 4-GF- 1727715 10 DFK-PC 5/ 4-GU- 1727825 10 DFK-PC 5/ 4-GFU- 1727935 10 DFK-PC 5/ 5-GF- 1727728 10 DFK-PC 5/ 5-GU- 17278 10 DFK-PC 5/ 5-GFU- 1727948 10 DFK-PC 5/ 6-GF- 1727731 10 DFK-PC 5/ 6-GU- 1727841 10 DFK-PC 5/ 6-GFU- 1727951 10 DFK-PC 5/ 7-GF- 1727744 10 DFK-PC 5/ 7-GU- 1727854 10 DFK-PC 5/ 7-GFU- 1727964 10 DFK-PC 5/ 8-GF- 1727757 10 DFK-PC 5/ 8-GU- 1727867 10 DFK-PC 5/ 8-GFU- 1727977 10 DFK-PC 5/ 9-GF- 1727760 10 DFK-PC 5/ 9-GU- 1727870 10 DFK-PC 5/ 9-GFU- 1727980 10 DFK-PC 5/10-GF- 1727773 10 DFK-PC 5/10-GU- 1727883 10 DFK-PC 5/10-GFU- 1727993 10 DFK-PC 5/11-GF- 1727786 10 DFK-PC 5/11-GU- 1727896 10 DFK-PC 5/11-GFU- 1728002 10 DFK-PC 5/12-GF- 1727799 10 DFK-PC 5/12-GU- 1727906 10 DFK-PC 5/12-GFU- 1716056 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 545

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Feed-through heder with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. With threded flnge nd shield feed-through on the inside of the device Feed-through heders for use in combintion with ll PC 5 plugs To solder onto the PCB In SH versions, shielding functions cn be executed on the inside of the device s well Mounting on the housing wll using the snp-lock mechnism to be operted without tools or the clssicl screw connection Wll thicknesses from 1 mm to 3 mm Suitble for 600 V UL when used in combintion with PC 5 screw or springcge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Mrker crds SK /3,8 799 Dimensionl drwing +42,24 12,4 29,25 7,08 +36,24 19,54 5 5,08 1,83 21,12 1,83 1,93 5,08 5,08 Drilling digrm 1,3 1,7 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 41 1 ) Rted insultion voltge for pollution degree 2 [V] 630 Pitch [mm] 7.62 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 500 630 800 Rted surge voltge [kv] 6 6 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 150 300 Nominl current [A] 41 41 10 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.3 / 0.8 x 1.0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 DFK-PC 5/ 2-GF-SH- 1716069 10 3 15.24 DFK-PC 5/ 3-GF-SH- 1716072 10 4 22.86 DFK-PC 5/ 4-GF-SH- 1716085 10 5 30.48 DFK-PC 5/ 5-GF-SH- 1716098 10 6.10 DFK-PC 5/ 6-GF-SH- 1716108 10 7 45.72 DFK-PC 5/ 7-GF-SH- 1716111 10 8 53.34 DFK-PC 5/ 8-GF-SH- 1716124 10 9 60.96 DFK-PC 5/ 9-GF-SH- 1716137 10 10 68.58 DFK-PC 5/10-GF-SH- 17161 10 11 76.20 DFK-PC 5/11-GF-SH- 1716153 10 12 83.82 DFK-PC 5/12-GF-SH- 1716166 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 546 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Rotted 180, threded flnge, shield feedthrough on the inside of the device Verticl, comptible with STCL plugs Verticl, threded flnge, shield connection on the front of the device Dimensionl drwing Dimensionl drwing Dimensionl drwing 1,83 +42,24 5,08 +36,24 +33,12 +42,24 19,54 +27,12 19,54 +36,24 12,4 29,25 7,08 21,12 16,56 21,12 5,08 5,08 5,08 5,08 1,83 1,93 19,54 4,2 29,25 29,25 12,4 12,4 5 3,4 5,08 5 3,4 5,08 Drilling digrm Drilling digrm Drilling digrm 1,3 1,7 3,4 1,3 3,4 1,3 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green DFK-PC 5/ 2-GFU-SH- 1716179 10 DFK-PCV 5/ 2-G- 1716289 10 DFK-PCV 5/ 2-GF- 1716399 10 DFK-PC 5/ 3-GFU-SH- 1716182 10 DFK-PCV 5/ 3-G- 1716292 10 DFK-PCV 5/ 3-GF- 17169 10 DFK-PC 5/ 4-GFU-SH- 1716195 10 DFK-PCV 5/ 4-G- 1716302 10 DFK-PCV 5/ 4-GF- 1716412 10 DFK-PC 5/ 5-GFU-SH- 1716205 10 DFK-PCV 5/ 5-G- 1716315 10 DFK-PCV 5/ 5-GF- 1716425 10 DFK-PC 5/ 6-GFU-SH- 1716218 10 DFK-PCV 5/ 6-G- 1716328 10 DFK-PCV 5/ 6-GF- 17164 10 DFK-PC 5/ 7-GFU-SH- 1716221 10 DFK-PCV 5/ 7-G- 1716331 10 DFK-PCV 5/ 7-GF- 1716441 10 DFK-PC 5/ 8-GFU-SH- 1716234 10 DFK-PCV 5/ 8-G- 1716344 10 DFK-PCV 5/ 8-GF- 1716454 10 DFK-PC 5/ 9-GFU-SH- 1716247 10 DFK-PCV 5/ 9-G- 1716357 10 DFK-PCV 5/ 9-GF- 1716467 10 DFK-PC 5/10-GFU-SH- 1716250 10 DFK-PCV 5/10-G- 1716360 10 DFK-PCV 5/10-GF- 1716470 10 DFK-PC 5/11-GFU-SH- 1716263 10 DFK-PCV 5/11-G- 1716373 10 DFK-PCV 5/11-GF- 1716483 10 DFK-PC 5/12-GFU-SH- 1716276 10 DFK-PCV 5/12-G- 17166 10 DFK-PCV 5/12-GF- 1716496 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 547

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm Feed-through heder with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 486. The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. 1 ) Derting curves on request. Comptible with STCL plugs, 600 V UL pprovl Feed-through heders for use in combintion with PC 5 plugs Screw connection for direct wiring on the inside of the device Mounting on the housing wll using the snp-lock mechnism to be operted without tools or the clssicl screw connection Wll thicknesses from 1 mm to 3 mm In SH versions, shielding functions cn be executed on the inside of the device s well Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Mrker crds SK /3,8 Screwdriver SZK PZ 1 1206450 799 Dimensionl drwing 26,24 +33,12 +27,12 19,54 36,55 12,4 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 7.62 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.2-10 / 0.2-6 / 24-10 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.25-4 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.2-2.5 / 0.2-4 Strnded with ferrules without plstic sleeve [mm 2 ] 0.25-1.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.25-2.5 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 41 41 - Connection cpcity AWG AWG 24-8 24-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 10 Screw thred M3 Tightening torque [Nm] 0.7-0.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 7.62 mm, color: green [mm] 2 7.62 DFK-PC 5/ 2-ST- 1716506 10 3 15.24 DFK-PC 5/ 3-ST- 1716519 10 4 22.86 DFK-PC 5/ 4-ST- 1716522 10 5 30.48 DFK-PC 5/ 5-ST- 1716535 10 6.10 DFK-PC 5/ 6-ST- 1716548 10 7 45.72 DFK-PC 5/ 7-ST- 1716551 10 8 53.34 DFK-PC 5/ 8-ST- 1716564 10 9 60.96 DFK-PC 5/ 9-ST- 1716577 10 10 68.58 DFK-PC 5/10-ST- 1716580 10 11 76.20 DFK-PC 5/11-ST- 1716593 10 12 83.82 DFK-PC 5/12-ST- 1716603 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 548 PHOENIX CONTACT

PC 5 series plug-in connectors up to 41 A/10 mm2, pitch 7.62 mm With threded flnge nd shield connection on the front of the device, 600 V UL pprovl With threded flnge nd shield feed-through on the inside of the device, 600 V UL pprovl Dimensionl drwing Dimensionl drwing +42,24 +36,24 36,55 12,4 +42,24 +36,24 36,55 12,4 26,24 19,54 26,24 19,54 9,23 5,08 Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 7.62 mm, color: green Pitch 7.62 mm, color: green DFK-PC 5/ 2-STF- 1716616 10 DFK-PC 5/ 2-STF-SH- 1716726 10 DFK-PC 5/ 3-STF- 1716629 10 DFK-PC 5/ 3-STF-SH- 1716739 10 DFK-PC 5/ 4-STF- 1716632 10 DFK-PC 5/ 4-STF-SH- 1716742 10 DFK-PC 5/ 5-STF- 1716645 10 DFK-PC 5/ 5-STF-SH- 1716755 10 DFK-PC 5/ 6-STF- 1716658 10 DFK-PC 5/ 6-STF-SH- 1716768 10 DFK-PC 5/ 7-STF- 1716661 10 DFK-PC 5/ 7-STF-SH- 1716771 10 DFK-PC 5/ 8-STF- 1716674 10 DFK-PC 5/ 8-STF-SH- 1716784 10 DFK-PC 5/ 9-STF- 1716687 10 DFK-PC 5/ 9-STF-SH- 1716797 10 DFK-PC 5/10-STF- 1716690 10 DFK-PC 5/10-STF-SH- 1716807 10 DFK-PC 5/11-STF- 1716700 10 DFK-PC 5/11-STF-SH- 1716810 10 DFK-PC 5/12-STF- 1716713 10 DFK-PC 5/12-STF-SH- 1716823 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 549

PC 6 series plug-in connectors up to 41 A/6 mm2, pitch 10.16 mm Plug with screw connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl High-cpcity plugs with current crrying cpcity of 41 A nd connection cpcity of 6 mm 2, strnded/10 mm 2, solid Unrestricted 600-V-UL pprovl Contct sfety, thnks to integrted double steel spring nd silver-plted surfces Screw flnge (-F) nd shield (-SH) Cn be plugged onto PC 6-16 heders CP-PC RD coding profile Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Mrker strips SK 5,0 WH:REEL 0805221 Screwdriver SZS 1,0 x 4,0 1205066 801 27,55 Dimensionl drwing 39 14,7 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 6 mm 2 Reduction fctor = 0.8 Number of positions = see digrm +9,2 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.75-10 / 0.75-6 / 18-8 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.5-6 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.75-4 / 0.75-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-2.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-4 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 50 50 - Connection cpcity AWG AWG 20-8 20-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 12 Screw thred M4 Tightening torque [Nm] 1.2-1.5 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 PC 6/ 2-ST- 1913507 50 3 20.32 PC 6/ 3-ST- 1913510 50 4 30.48 PC 6/ 4-ST- 1913523 50 5.64 PC 6/ 5-ST- 1913536 50 6 50.80 PC 6/ 6-ST- 1913549 50 7 60.96 PC 6/ 7-ST- 1913552 50 8 71.12 PC 6/ 8-ST- 1913565 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 550 PHOENIX CONTACT

PC 6 series plug-in connectors up to 41 A/6 mm2, pitch 10.16 mm With screw flnge, 600 V UL pprovl With screw flnge nd shield, 600 V UL pprovl Dimensionl drwing Dimensionl drwing 89,8 39 9,36 +9,2 39 2 14,5 27,55 14,7 12,5 10 6 +27,92 14,7 Representtive derting curve Type: PC 6/..-ST- with PC 6-16/..-G1- Current crrying cpcity [A] 72 64 56 48 32 24 16 8 0 0 1 = 2-pos. 2 = 5-pos. 3 = 8-pos. 20 3 60 2 1 80 100 Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green PC 6/ 2-STF- 1913578 50 PC 6/ 3-STF- 1913581 50 PC 6/ 3-STF-SH- 1973042 50 PC 6/ 4-STF- 1913594 50 PC 6/ 4-STF-SH- 1966431 50 PC 6/ 5-STF- 1913604 50 PC 6/ 6-STF- 1913617 50 PC 6/ 7-STF- 1913620 50 PC 6/ 8-STF- 1913633 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 551

PC 6 series plug-in connectors up to 41 A/6 mm2, pitch 10.16 mm Plugs for direct mounting with socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Verticl plug-in direction, cn be screwed on, 600 V UL pprovl Accessories Dimensionl drwing Plug-in block for direct mounting with current crrying cpcity of 41 A nd connection cpcity of 6 mm 2, strnded / 10 mm 2, solid Unrestricted 600-V-UL pprovl Esy-mintennce PCB connection (PC 6-16 G1) or inverted IPC 16 plugs Lterlly mounted flnge for screw connection in the housing / on the mounting plte For ll types Type Pge Coding profile CP-PC RD 1701967 Mrker strips SK 5,0 WH:REEL 0805221 Screwdriver SZS 1,0 x 4,0 1205066 801 32,8 +30,32 5 15,16 6,5 33,9 29,7 Drilling digrm 5 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 41 1 ) / 10 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid / strnded [mm²] / [mm²] / AWG 0.5-10 / 0.5-6 / 20-7 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-6 Strnded with ferrules with plstic sleeve [mm 2 ] 0.5-6 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid / strnded [mm 2 ] 0.5-6 / 0.5-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-2.5 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-4 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 50 50 - Connection cpcity AWG AWG 20-8 20-8 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 12 Screw thred M4 Tightening torque [Nm] 1.2-1.5 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 PCU 6/ 2-STD- 1922637 50 3 20.32 PCU 6/ 3-STD- 19226 50 4 30.48 PCU 6/ 4-STD- 1922653 50 5.64 PCU 6/ 5-STD- 1922666 50 6 50.80 PCU 6/ 6-STD- 1922679 50 7 60.96 PCU 6/ 7-STD- 1922682 50 8 71.12 PCU 6/ 8-STD- 1922695 50 9 81.28 PCU 6/ 9-STD- 1922705 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 552 PHOENIX CONTACT

PC 6 series plug-in connectors up to 41 A/6 mm2, pitch 10.16 mm Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 553

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. When using ferrules for 16 mm 2 conductors, crimp with CRIMPFOX 16 S (see ccessories). 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl High-cpcity plugs with current crrying cpcity of 76 A nd connection cpcity of 16 mm 2, strnded Unrestricted 600-V-UL pprovl Mximum contct sfety, thnks to n integrted double steel spring Further fetures: screw flnge (-STF) nd shield (-SH) Cn be plugged into PC 6-16 heders nd IPC 16 plugs CP-PC RD coding profile Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZS 1,0 x 4,0 1205066 Mrker strips SK 5,0 WH:REEL 0805221 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Crimping pliers for 10 to 16 mm 2 CRIMPFOX 16 S 1207983 801 CCA 27,8 Dimensionl drwing 41,5 14,7 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 16 mm 2 Reduction fctor = 0.8 Number of positions = see digrm +10 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 76 1 ) / 16 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.75-16 / 0.75-16 / 18-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-16 Strnded with ferrules with plstic sleeve [mm 2 ] 0.5-16 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-6 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 55 55 - Connection cpcity AWG AWG 20-6 20-6 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 12 Screw thred M4 Tightening torque [Nm] 1.7-1.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 PC 16/ 2-ST- 1967375 50 3 20.32 PC 16/ 3-ST- 19678 50 4 30.48 PC 16/ 4-ST- 1967391 50 5.64 PC 16/ 5-ST- 19671 50 6 50.80 PC 16/ 6-ST- 1967414 50 7 60.96 PC 16/ 7-ST- 1967427 50 8 71.12 PC 16/ 8-ST- 1967430 50 9 81.28 PC 16/ 9-ST- 1967443 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 554 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With screw flnge, 600 V UL pprovl With screw flnge nd shield, 600 V UL pprovl CCA Dimensionl drwing 27,8 41,5 8,96 +10 CCA Dimensionl drwing 89,8 41,5 14,7 2 14,5 14,7 12,5 10,5 8 +27,92 13,96 Representtive derting curves of the bove-mentioned plugs Type: PC 16/..-ST- with PC 6-16/..-G1- Type: PC 16/..-ST- with IPC 16/..-ST- Current crrying cpcity [A] 88 80 72 64 56 48 32 24 16 8 0 0 1 = 2-pos. 2 = 5-pos. 3 = 9-pos. 20 3 60 2 1 80 100 Current crrying cpcity [A] 88 80 72 64 56 48 32 24 1 = 2-pos. 16 2 = 5-pos. 8 3 = 9-pos. 0 0 20 3 60 2 1 80 100 Ambient temperture [ C] Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green PC 16/ 2-STF- 1967456 50 PC 16/ 3-STF- 1967469 50 PC 16/ 3-STF-SH- 1737530 50 PC 16/ 4-STF- 1967472 50 PC 16/ 4-STF-SH- 1970359 50 PC 16/ 5-STF- 1967485 50 PC 16/ 6-STF- 1967498 50 PC 16/ 7-STF- 1967508 50 PC 16/ 8-STF- 1967511 50 PC 16/ 9-STF- 1967524 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 555

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. When using ferrules for 16 mm 2 conductors, crimp with CRIMPFOX 16 S (see ccessories). 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl Plug with double connection nd current crrying cpcity of 76 A Simple potentil distribution through two terminl points per contct Unrestricted 600-V-UL pprovl Mximum contct sfety, thnks to n integrted double steel spring CP-PC RD coding profile Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZS 1,0 x 4,0 1205066 Mrker strips SK 5,0 WH:REEL 0805221 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Crimping pliers for 10 to 16 mm 2 CRIMPFOX 16 S 1207983 801 51,4 Dimensionl drwing 54,9 14,7 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 16 mm 2 Reduction fctor = 0.8 Number of positions = see digrm +10 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 76 1 ) / 16 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.75-16 / 0.75-16 / 18-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-16 Strnded with ferrules with plstic sleeve [mm 2 ] 0.5-16 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-6 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 60 60 - Connection cpcity AWG AWG 20-4 20-4 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 18 Screw thred M4 Tightening torque [Nm] 1.7-1.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 TPC 16/ 2-ST- 1715170 20 3 20.32 TPC 16/ 3-ST- 1715183 20 4 30.48 TPC 16/ 4-ST- 1715196 20 5.64 TPC 16/ 5-ST- 1715206 20 6 50.80 TPC 16/ 6-ST- 1715219 20 7 60.96 TPC 16/ 7-ST- 1715222 20 8 71.12 TPC 16/ 8-ST- 1715235 20 9 81.28 TPC 16/ 9-ST- 1715248 20 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 556 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With screw flnge, 600 V UL pprovl Dimensionl drwing 54,9 8,96 +10 51,4 14,7 Representtive derting curve Type: TPC 16/...-ST- with PC 6-16/...-G1- Current crrying cpcity [A] 80 70 60 50 3 30 20 1 = 2-pos. 2 = 5-pos. 10 3 = 9-pos. 0 0 20 2 60 1 80 100 Ambient temperture [ C] Ordering dt Type Pcs. / Pkt. Pitch 10.16 mm, color: green TPC 16/ 2-STF- 1715251 20 TPC 16/ 3-STF- 1715264 20 TPC 16/ 4-STF- 1715277 20 TPC 16/ 5-STF- 1715280 20 TPC 16/ 6-STF- 1715293 20 TPC 16/ 7-STF- 1715303 20 TPC 16/ 8-STF- 1715316 20 TPC 16/ 9-STF- 1715329 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 557

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. When using ferrules for 16 mm 2 conductors, crimp with CRIMPFOX 16 S (see ccessories). 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl Inverted IPC 16 plugs with pin contcts for touch-proof device outputs (with IPC 16 G) or free-hnging cble/cble connections Unrestricted 600-V-UL pprovl Cn be plugged into PC 16 plugs or inverted IPC 16 heders The SH versions provide professionl EMC shield nd n optionl strin relief Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZS 1,0 x 4,0 1205066 Mrker strips SK 5,0 WH:REEL 0805221 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Crimping pliers for 10 to 16 mm 2 CRIMPFOX 16 S 1207983 801 27,8 Dimensionl drwing 44,1 6,6 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 16 mm 2 Reduction fctor = 0.8 Number of positions = see digrm +13,2 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 76 1 ) / 16 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.75-16 / 0.75-16 / 18-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-16 Strnded with ferrules with plstic sleeve [mm 2 ] 0.5-16 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-6 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 55 55 - Connection cpcity AWG AWG 20-6 20-6 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 12 Screw thred M4 Tightening torque [Nm] 1.7-1.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 IPC 16/ 2-ST- 1969373 50 3 20.32 IPC 16/ 3-ST- 19696 50 4 30.48 IPC 16/ 4-ST- 1969399 50 5.64 IPC 16/ 5-ST- 19699 50 6 50.80 IPC 16/ 6-ST- 1969412 50 7 60.96 IPC 16/ 7-ST- 1969425 50 8 71.12 IPC 16/ 8-ST- 19694 50 9 81.28 IPC 16/ 9-ST- 1969441 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 558 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With screw flnge, 600 V UL pprovl With screw flnge nd shield, 600 V UL pprovl Dimensionl drwing Dimensionl drwing 44,1 7,96 +12 94,1 44,1 13,96 27,8 12,5 10,5 2 14,5 8 +27,92 Representtive derting curves of the bove-mentioned plugs Type: IPC 16/..-ST- with DFK-IPC 16/..-G- Type: IPC 16/...-ST- with IPC 16/...-G- Current crrying cpcity [A] 88 80 72 64 56 48 32 24 1 = 2-pos. 16 2 = 5-pos. 8 3 = 9-pos. 0 0 20 3 60 80 1 2 100 Current crrying cpcity [A] 84 72 60 48 36 24 2 = 2-pos. 12 3 = 5-pos. 4 = 9-pos. 0 0 20 3 4 60 2 80 100 Ambient temperture [ C] Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green IPC 16/ 2-STF- 1969454 50 IPC 16/ 3-STF- 1969467 50 IPC 16/ 3-STF-SH- 1737323 50 IPC 16/ 4-STF- 1969470 50 IPC 16/ 4-STF-SH- 1970346 50 IPC 16/ 5-STF- 1969483 50 IPC 16/ 6-STF- 1969496 50 IPC 16/ 7-STF- 1969506 50 IPC 16/ 7-STF-SH- 1737336 50 IPC 16/ 8-STF- 1969519 50 IPC 16/ 9-STF- 1969522 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 559

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. When using ferrules for 16 mm 2 conductors, crimp with CRIMPFOX 16 S (see ccessories). 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. With threded flnge, 600 V UL pprovl Inverted IPC 16 plugs with pin contcts for free-hnging cble/cble connections Incresed protection ginst vibrtion, thnks to screw-on STGF plugs with threded flnge (cn be plugged onto PC 16 plugs) Unrestricted 600-V-UL pprovl The SH versions provide professionl EMC shield nd n optionl strin relief Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZS 1,0 x 4,0 1205066 Mrker strips SK 5,0 WH:REEL 0805221 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Crimping pliers for 10 to 16 mm 2 CRIMPFOX 16 S 1207983 801 CCA 27,8 Dimensionl drwing 44,1 7,96 +12 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 16 mm 2 Reduction fctor = 0.8 Number of positions = see digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 76 1 ) / 16 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.75-16 / 0.75-16 / 18-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-16 Strnded with ferrules with plstic sleeve [mm 2 ] 0.5-16 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-6 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 55 55 - Connection cpcity AWG AWG 20-6 20-6 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 12 Screw thred M4 Tightening torque [Nm] 1.7-1.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 IPC 16/ 2-STGF- 1975817 50 3 20.32 IPC 16/ 3-STGF- 1975820 50 4 30.48 IPC 16/ 4-STGF- 1975833 50 5.64 IPC 16/ 5-STGF- 1975846 50 6 50.80 IPC 16/ 6-STGF- 1975859 50 7 60.96 IPC 16/ 7-STGF- 1975862 50 8 71.12 IPC 16/ 8-STGF- 1975875 50 9 81.28 IPC 16/ 9-STGF- 1975888 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 560 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge nd shield, 600 V UL pprovl CCA Dimensionl drwing 94,1 44,1 13,96 10,5 2 14,5 12,5 8 30,48 58,4 Representtive derting curve Type: PC 16/..-ST- with IPC 16/..-ST- Current crrying cpcity [A] 88 80 72 64 56 48 32 24 16 8 0 0 1 = 2-pos. 2 = 5-pos. 3 = 9-pos. 20 3 60 2 1 80 100 Ambient temperture [ C] Ordering dt Type Pcs. / Pkt. Pitch 10.16 mm, color: green IPC 16/ 4-STGF-SH- 1975891 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 561

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. When using ferrules for 16 mm 2 conductors, crimp with CRIMPFOX 16 S (see ccessories). 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl Push-in spring connection plug with current crrying cpcity of 76 A Fst connection technology, thnks to principle of direct plug-in without tools Unrestricted 600-V-UL pprovl Mximum contct sfety, thnks to n integrted double steel spring The SH versions provide professionl shield nd n optionl strin relief CP-PC RD coding profile Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZF 2-0,8 x4,0 1204520 Mrker strips SK 5,0 WH:REEL 0805221 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Crimping pliers for 10 to 16 mm 2 CRIMPFOX 16 S 1207983 801 CCA 25,1 Dimensionl drwing 44,5 14,7 5,08 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 16 mm 2 Reduction fctor = 0.8 Number of positions = see digrm + Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 76 1 ) / 16 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.75-16 / 0.75-16 / 18-4 Strnded with ferrules without plstic sleeve [mm 2 ] 0.75-16 Strnded with ferrules with plstic sleeve [mm 2 ] 0.75-10 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] - /- Strnded with ferrules without plstic sleeve [mm 2 ] - Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.75-4 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 66 66 - Connection cpcity AWG AWG 20-4 20-4 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 18 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 SPC 16/ 2-ST- 1711268 50 3 20.32 SPC 16/ 3-ST- 1711271 50 4 30.48 SPC 16/ 4-ST- 1711284 50 5.64 SPC 16/ 5-ST- 1711297 50 6 50.80 SPC 16/ 6-ST- 1711307 50 7 60.96 SPC 16/ 7-ST- 1711310 50 8 71.12 SPC 16/ 8-ST- 1711323 50 9 81.28 SPC 16/ 9-ST- 1711336 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 562 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With screw flnge, 600 V UL pprovl With screw flnge nd shield, 600 V UL pprovl CCA Dimensionl drwing 25,1 44,5 8,88 + 14,7 CCA Dimensionl drwing 12,5 96,6 44,5 14,7 58,4 Representtive derting curve Type: SPC 16/...-ST- with PC 6-16/...-G1- Current crrying cpcity [A] 90 80 70 60 50 30 1 = 2-pos. 20 2 = 5-pos. 10 3 = 9-pos. 0 0 20 3 2 60 1 80 100 Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green SPC 16/ 2-STF- 1711378 50 SPC 16/ 3-STF- 17111 50 SPC 16/ 4-STF- 1711394 50 SPC 16/ 4-STF-SH- 1711488 50 SPC 16/ 5-STF- 17114 50 SPC 16/ 6-STF- 1711417 50 SPC 16/ 7-STF- 1711420 50 SPC 16/ 8-STF- 1711433 50 SPC 16/ 9-STF- 1711446 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 563

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Plugs with screw nd spring connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. When using ferrules for 16 mm 2 conductors, crimp with CRIMPFOX 16 S (see ccessories). 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without screw flnge, 600 V UL pprovl Inverted ISPC 16 push-in spring connection plugs with pin contct for touchproof device outputs (with IPC 16 G) or free-hnging cble/cble connections Unrestricted 600-V-UL pprovl Cn be plugged into (S)PC 16 plugs or inverted IPC 16 heders Incresed vibrtion protection, thnks to screw-on STF plug with screw flnge STGF plugs with threded flnge for free hnging cble/cble connections Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screwdriver SZF 2-0,8 x4,0 1204520 Mrker strips SK 5,0 WH:REEL 0805221 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Crimping pliers for 10 to 16 mm 2 CRIMPFOX 16 S 1207983 801 CCA 25,1 Dimensionl drwing 45,1 +13,2 6,6 Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 16 mm 2 Reduction fctor = 0.8 Number of positions = see digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 76 1 ) / 16 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.75-16 / 0.75-16 / 18-4 Strnded with ferrules without plstic sleeve [mm 2 ] 0.75-16 Strnded with ferrules with plstic sleeve [mm 2 ] 0.75-10 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] - /- Strnded with ferrules without plstic sleeve [mm 2 ] - Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.75-4 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 66 66 - Connection cpcity AWG AWG 20-4 20-4 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 18 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 ISPC 16/ 2-ST- 1748545 50 3 20.32 ISPC 16/ 3-ST- 1748558 50 4 30.48 ISPC 16/ 4-ST- 1748561 50 5.64 ISPC 16/ 5-ST- 1748574 50 6 50.80 ISPC 16/ 6-ST- 1748587 50 7 60.96 ISPC 16/ 7-ST- 1748590 50 8 71.12 ISPC 16/ 8-ST- 1748600 50 9 81.28 ISPC 16/ 9-ST- 1748613 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 564 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With screw flnge, 600 V UL pprovl With threded flnge, 600 V UL pprovl CCA Dimensionl drwing CCA Dimensionl drwing 45,1 +27,92 45,1 +27,92 25,1 25,1 Representtive derting curves of the bove-mentioned plugs Type: ISPC 16/...-ST- with IPC 16/...-G- Type: ISPC 16/...-ST- with SPC 16/...-ST- Current crrying cpcity [A] 96 80 64 48 32 1 = 2-pos. 16 2 = 5-pos. 3 = 9-pos. 0 0 20 2 3 60 80 1 100 Current crrying cpcity [A] 90 80 70 60 50 30 20 1 = 2-pos. 2 = 5-pos. 10 3 = 9-pos. 0 0 20 2 1 3 60 80 100 Ambient temperture [ C] Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green ISPC 16/ 2-STF- 1748626 50 ISPC 16/ 2-STGF- 1748707 50 ISPC 16/ 3-STF- 1748639 50 ISPC 16/ 3-STGF- 1748710 50 ISPC 16/ 4-STF- 1748642 50 ISPC 16/ 4-STGF- 1748723 50 ISPC 16/ 5-STF- 1748655 50 ISPC 16/ 5-STGF- 1748736 50 ISPC 16/ 6-STF- 1748668 50 ISPC 16/ 6-STGF- 1748749 50 ISPC 16/ 7-STF- 1748671 50 ISPC 16/ 7-STGF- 1748752 50 ISPC 16/ 8-STF- 1748684 50 ISPC 16/ 8-STGF- 1748765 50 ISPC 16/ 9-STF- 1748697 50 ISPC 16/ 9-STGF- 1748778 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 565

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Heders with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. Mounting screw for PC-6-16/...-G1F- nd PC 6-16/...-G1FU- : sheet metl screw ISO 1481-ST 2,9 C. Screw connection only permitted prior to soldering. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge PC 6-16 heders for use in combintion with ll PC 6 nd PC 16 plugs PCB-PCB connections by using IPC 16 heders G1U versions for solder-in direction rotted by 180 Shroud PCB-SHIELD for professionl EMC shield connection Threded flnge G1F (lso for screw connection on the PCB or in the device) Suitble for 600 V UL when used in combintion with PC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Coding pin CS-IPC 16/6 1970016 Mrker strips SK 5,0 WH:REEL 0805221 Only for PC 6-16/...-G1(U)- Shroud POWER COMBICON PCB-SHIELD 19687 801 CCA Dimensionl drwing 4 13,4 34 +13,2 4,24 5,08 4,24 6 5,08 Drilling digrm 1,7 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 76 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 66 66 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.7 / 1 x 1.2 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 PC 6-16/ 2-G1-1998933 50 3 20.32 PC 6-16/ 3-G1-1998946 50 4 30.48 PC 6-16/ 4-G1-1998959 50 5.64 PC 6-16/ 5-G1-1998962 50 6 50.80 PC 6-16/ 6-G1-1998975 50 7 60.96 PC 6-16/ 7-G1-1998988 50 8 71.12 PC 6-16/ 8-G1-1998991 50 9 81.28 PC 6-16/ 9-G1-1996391 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 566 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge Rotted 180, without threded flnge Rotted 180, with threded flnge CCA CCA CCA Dimensionl drwing Dimensionl drwing Dimensionl drwing 34 +27,92 34 4,24 +13,2 34 4,24 +27,92 13,4 4 4,24 4 13,4 13,4 4 Drilling digrm Drilling digrm Drilling digrm 5,08 4,24 5,08 13,96 1,7 3,2 5,08 5,08 4,24 6 5,08 4,24 5,08 13,96 1,7 3,2 3,6 1,7 3,6 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green PC 6-16/ 2-G1F- 1999000 50 PC 6-16/ 2-G1U- 1996236 50 PC 6-16/ 2-G1FU- 1996317 50 PC 6-16/ 3-G1F- 1999013 50 PC 6-16/ 3-G1U- 1996249 50 PC 6-16/ 3-G1FU- 1996320 50 PC 6-16/ 4-G1F- 1999026 50 PC 6-16/ 4-G1U- 1996252 50 PC 6-16/ 4-G1FU- 1996333 50 PC 6-16/ 5-G1F- 1999039 50 PC 6-16/ 5-G1U- 1996265 50 PC 6-16/ 5-G1FU- 1996346 50 PC 6-16/ 6-G1F- 1999042 50 PC 6-16/ 6-G1U- 1996278 50 PC 6-16/ 6-G1FU- 1996359 50 PC 6-16/ 7-G1F- 1999055 50 PC 6-16/ 7-G1U- 1996281 50 PC 6-16/ 7-G1FU- 1996362 50 PC 6-16/ 8-G1F- 1999068 50 PC 6-16/ 8-G1U- 1996294 50 PC 6-16/ 8-G1FU- 1996375 50 PC 6-16/ 9-G1F- 19961 50 PC 6-16/ 9-G1U- 1996304 50 PC 6-16/ 9-G1FU- 19968 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 567

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Heders with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. Mounting screw for PCV 6-16/...-G1F-: sheet metl screw ISO 1481-ST 2,9 C. Screw connection only permitted prior to soldering. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge Verticl PCV 6-16 heders for use in combintion with ll PC 6 nd PC 16 plugs PCB-PCB connections by using IPC 16 heders Threded flnge G1F (lso for screw connection on the PCB or in the device) CS-IPC 16/6 to serve s n nti-rottion element during ssembly Suitble for 600 V UL when used in combintion with PC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Coding pin CS-IPC 16/6 1970016 Mrker strips SK 5,0 WH:REEL 0805221 801 CCA Dimensionl drwing 4 34 +13,2 1,6 6 13,4 6 5,08 5,08 1,6 Drilling digrm 1,7 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 76 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 6 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 66 66 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.7 / 1 x 1.2 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 PCV 6-16/ 2-G1-1998784 50 3 20.32 PCV 6-16/ 3-G1-1998797 50 4 30.48 PCV 6-16/ 4-G1-1998807 50 5.64 PCV 6-16/ 5-G1-1998810 50 6 50.80 PCV 6-16/ 6-G1-1998823 50 7 60.96 PCV 6-16/ 7-G1-1998836 50 8 71.12 PCV 6-16/ 8-G1-1998849 50 9 81.28 PCV 6-16/ 9-G1-1998852 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 568 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge CCA Dimensionl drwing +27,92 13,4 1,6 13,96 5,08 5,08 1,6 4 34 Drilling digrm 1,7 3,2 Ordering dt Type Pcs. / Pkt. Pitch 10.16 mm, color: green PCV 6-16/ 2-G1F- 1998865 50 PCV 6-16/ 3-G1F- 1998878 50 PCV 6-16/ 4-G1F- 1998881 50 PCV 6-16/ 5-G1F- 1998894 50 PCV 6-16/ 6-G1F- 1998904 50 PCV 6-16/ 7-G1F- 1998917 50 PCV 6-16/ 8-G1F- 1998920 50 PCV 6-16/ 9-G1F- 1996414 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 569

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Heders with socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. Mounting screw for IPC 16/...-GF- nd IPC 16/...-GFU-: sheet metl screw ISO 1481-ST 2,9 C. Screw connection only permitted prior to soldering. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge An inverted IPC 16 heder to implement touch-proof PCB output or PCB- PCB-connection (in combintion with PC 6-16 bse strips) GU versions for solder-in direction rotted by 180 Threded flnge GF (lso for screw connection on the PCB or in the device) Shroud PCB-SHIELD (EMC connection) Suitble for 600 V UL when used in combintion with PC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Coding pin CS-IPC 16/6 1970016 Mrker strips SK 5,0 WH:REEL 0805221 Only for IPC 16/...-G(F)U-10,6 Shroud POWER COMBICON PCB-SHIELD 19687 801 CCA Dimensionl drwing 4 13,6 32,1 4,24 14,7 4,24 5,48 +10,96 5,48 Drilling digrm 1,7 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 76 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 66 66 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.7 / 0.8 x 1.2 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 IPC 16/ 2-G- 1969535 50 3 20.32 IPC 16/ 3-G- 1969548 50 4 30.48 IPC 16/ 4-G- 1969551 50 5.64 IPC 16/ 5-G- 1969564 50 6 50.80 IPC 16/ 6-G- 1969577 50 7 60.96 IPC 16/ 7-G- 1969580 50 8 71.12 IPC 16/ 8-G- 1969593 50 9 81.28 IPC 16/ 9-G- 1969603 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 570 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge Rotted 180, without threded flnge Rotted 180, with threded flnge CCA CCA CCA Dimensionl drwing Dimensionl drwing Dimensionl drwing 32,1 +27,92 +20,32 32,1 4,24 5,48 +10,96 32,1 4,24 +27,92 +20,32 4 13,96 4,24 8,05 4,24 5,48 4,24 13,6 4 4,24 14,7 14,7 13,6 4 8,05 13,6 14,7 13,96 Drilling digrm Drilling digrm Drilling digrm 3,2 1,7 1,7 3,2 1,7 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green Pitch 10.16 mm, color: green IPC 16/ 2-GF- 1969616 50 IPC 16/ 2-GU- 1969852 50 IPC 16/ 2-GFU- 1969933 50 IPC 16/ 3-GF- 1969629 50 IPC 16/ 3-GU- 1969865 50 IPC 16/ 3-GFU- 1969946 50 IPC 16/ 4-GF- 1969632 50 IPC 16/ 4-GU- 1969878 50 IPC 16/ 4-GFU- 1969959 50 IPC 16/ 5-GF- 1969645 50 IPC 16/ 5-GU- 1969881 50 IPC 16/ 5-GFU- 1969962 50 IPC 16/ 6-GF- 1969658 50 IPC 16/ 6-GU- 1969894 50 IPC 16/ 6-GFU- 1969975 50 IPC 16/ 7-GF- 1969661 50 IPC 16/ 7-GU- 1969904 50 IPC 16/ 7-GFU- 1969988 50 IPC 16/ 8-GF- 1969674 50 IPC 16/ 8-GU- 1969917 50 IPC 16/ 8-GFU- 1969991 50 IPC 16/ 9-GF- 1969687 50 IPC 16/ 9-GU- 1969920 50 IPC 16/ 9-GFU- 1970003 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 571

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Heders with socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. Mounting screw for IPCV 16/...-GF-: sheet metl screw ISO 1481-ST 2,9 C. Screw connection only permitted prior to soldering. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge CCA Accessories Dimensionl drwing An inverted IPC 16 heder in verticl design to implement touch-proof PCB output or PCB-PCB connection (in combintion with PC 6-16 bse strips) Integrted double steel spring Threded flnge GF (lso for screw connection on the PCB or in the device) CS-IPC 16/6 to serve s n nti-rottion element during ssembly Suitble for 600 V UL when used in combintion with PC 16 screw nd spring-cge plugs For ll types Type Pge Coding profile CP-PC RD 1701967 Coding pin CS-IPC 16/6 1970016 Mrker strips SK 5,0 WH:REEL 0805221 801 4 32,1 14,7 5,48 5,48 1,72 +10,96 13,6 Drilling digrm 1,7 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 76 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 66 66 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.7 / 0.8 x 1.2 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. Pitch 10.16 mm, color: green [mm] 2 10.16 IPCV 16/ 2-G- 1969690 50 3 20.32 IPCV 16/ 3-G- 1969700 50 4 30.48 IPCV 16/ 4-G- 1969713 50 5.64 IPCV 16/ 5-G- 1969726 50 6 50.80 IPCV 16/ 6-G- 1969739 50 7 60.96 IPCV 16/ 7-G- 1969742 50 8 71.12 IPCV 16/ 8-G- 1969755 50 9 81.28 IPCV 16/ 9-G- 1969768 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 572 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge CCA Dimensionl drwing +27,92 13,6 13,96 1,72 4 32,1 14,7 Drilling digrm 3,2 1,7 Ordering dt Type Pcs. / Pkt. Pitch 10.16 mm, color: green IPCV 16/ 2-GF- 1969771 50 IPCV 16/ 3-GF- 1969784 50 IPCV 16/ 4-GF- 1969797 50 IPCV 16/ 5-GF- 1969807 50 IPCV 16/ 6-GF- 1969810 50 IPCV 16/ 7-GF- 1969823 50 IPCV 16/ 8-GF- 1969836 50 IPCV 16/ 9-GF- 1969849 50 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 573

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Feed-through heders with pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. Mounting screw for DFK-PC 6-16/...-G- nd DFK-PC 6-16/...-GU-: sheet metl screw ISO 1481-ST 2,9 C. Screw connection only permitted prior to soldering. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge Feed-through heders for use in combintion with ll PC 6 nd PC 16 plugs To solder onto the PCB Mounting on the housing wll using the snp-lock mechnism to be operted without tools or the clssicl screw connection Wll thicknesses from 1 mm to 3 mm In GF versions, shielding functions cn be executed on the housing wll Suitble for 600 V UL when used in combintion with PC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Coding pin CS-IPC 16/6 1970016 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Mrker strips SK 5,0 WH:REEL 0805221 801 CCA Dimensionl drwing +29,6 12,4 34 +23,6 19 4,1 13,4 4,04 14,8 Drilling digrm 14,86 4,04 13 3,5 1,7 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 76 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 66 66 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.7 / 1.0 x 1.2 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 2 10.16 DFK-PC 6-16/ 2-G- 1701456 10 3 20.32 DFK-PC 6-16/ 3-G- 1701469 10 4 30.48 DFK-PC 6-16/ 4-G- 1701472 10 5.64 DFK-PC 6-16/ 5-G- 1701485 10 6 50.80 DFK-PC 6-16/ 6-G- 1701498 10 7 60.96 DFK-PC 6-16/ 7-G- 1701508 10 8 71.12 DFK-PC 6-16/ 8-G- 1701511 10 9 81.28 DFK-PC 6-16/ 9-G- 1701524 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 574 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge nd shield connection on the front of the device Rotted 180, without threded flnge Rotted 180, with threded flnge nd shield connection on the front of the device CCA CCA CCA Dimensionl drwing Dimensionl drwing Dimensionl drwing 12,4 34 +45,52 +39,52 12,4 34 4,04 +29,6 +23,6 12,4 34 4,04 +45,52 +39,52 19 4,1 13,4 19 4,1 13,4 19 4,1 13,4 4,04 14,8 Drilling digrm Drilling digrm Drilling digrm 4,04 22,76 1,7 14,86 4,04 13 4,04 22,76 1,7 3,5 1,7 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls DFK-PC 6-16/ 2-GF- 1701537 10 DFK-PC 6-16/ 2-GU- 1701618 10 DFK-PC 6-16/ 2-GFU- 1701692 10 DFK-PC 6-16/ 3-GF- 17015 10 DFK-PC 6-16/ 3-GU- 1701621 10 DFK-PC 6-16/ 3-GFU- 1701702 10 DFK-PC 6-16/ 4-GF- 1701553 10 DFK-PC 6-16/ 4-GU- 1701634 10 DFK-PC 6-16/ 4-GFU- 1701715 10 DFK-PC 6-16/ 5-GF- 1701566 10 DFK-PC 6-16/ 5-GU- 1701647 10 DFK-PC 6-16/ 5-GFU- 1701728 10 DFK-PC 6-16/ 6-GF- 1701579 10 DFK-PC 6-16/ 6-GU- 1701650 10 DFK-PC 6-16/ 6-GFU- 1701731 10 DFK-PC 6-16/ 7-GF- 1701582 10 DFK-PC 6-16/ 7-GU- 1701663 10 DFK-PC 6-16/ 7-GFU- 1701744 10 DFK-PC 6-16/ 8-GF- 1701595 10 DFK-PC 6-16/ 8-GU- 1701676 10 DFK-PC 6-16/ 8-GFU- 1701757 10 DFK-PC 6-16/ 9-GF- 1701605 10 DFK-PC 6-16/ 9-GU- 1701689 10 DFK-PC 6-16/ 9-GFU- 1701760 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 575

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Feed-through heders with pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. Mounting screw for DFK-PCV 6-16/...-G-: sheet metl screw ISO 1481-ST 2,9 C. Screw connection only permitted prior to soldering. 1) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Horizontl, with threded flnge nd shield feed-through on the inside of the device Feed-through heders for use in combintion with ll PC 6 nd PC 16 plugs To solder onto the PCB In SH versions, shielding functions cn be executed on the inside of the device s well Mounting on the housing wll using the snp-lock mechnism to be operted without tools or the clssicl screw connection Wll thicknesses from 1 mm to 3 mm Suitble for 600 V UL when used in combintion with PC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Coding pin CS-IPC 16/6 1970016 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Mrker strips SK 5,0 WH:REEL 0805221 801 CCA Dimensionl drwing +45,52 12,4 34 +39,52 19 4,1 13,4 22,76 10,36 4,04 1,7 5,08 5,08 4,04 14,8 10,36 Drilling digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 76 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 66 66 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.7 / 1.0 x 1.2 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 2 10.16 DFK-PC 6-16/ 2-GF-SH- 1701935 10 3 20.32 DFK-PC 6-16/ 3-GF-SH- 1701948 10 4 30.48 DFK-PC 6-16/ 4-GF-SH- 1701951 10 5.64 DFK-PC 6-16/ 5-GF-SH- 1701964 10 6 50.80 DFK-PC 6-16/ 6-GF-SH- 1701977 10 7 60.96 DFK-PC 6-16/ 7-GF-SH- 1701980 10 8 71.12 DFK-PC 6-16/ 8-GF-SH- 1701993 10 9 81.28 DFK-PC 6-16/ 9-GF-SH- 1702002 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 576 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Horizontl, rotted 180, with threded flnge nd shield feed-through on the inside of the device Verticl, without threded flnge Verticl, with threded flnge nd shield connection on the front of the device CCA CCA CCA Dimensionl drwing Dimensionl drwing Dimensionl drwing 5,08 10,36 +45,52 4,04 +39,52 19 4,1 13,4 +29,6 +45,52 19 +23,6 19 +39,52 14,8 22,76 14,86 14,86 5,08 10,36 4,04 1,7 4,42 4,42 34 12,4 34 12,4 12,4 34 4,2 4,42 14,8 4,2 4,42 22,76 Drilling digrm Drilling digrm Drilling digrm 1,7 1,7 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls DFK-PC 6-16/ 2-GFU-SH- 1702015 10 DFK-PCV 6-16/ 2-G- 1702099 10 DFK-PCV 6-16/ 2-GF- 1702251 10 DFK-PC 6-16/ 3-GFU-SH- 1702028 10 DFK-PCV 6-16/ 3-G- 1702109 10 DFK-PCV 6-16/ 3-GF- 1702264 10 DFK-PC 6-16/ 4-GFU-SH- 1702031 10 DFK-PCV 6-16/ 4-G- 1702112 10 DFK-PCV 6-16/ 4-GF- 1702277 10 DFK-PC 6-16/ 5-GFU-SH- 1702044 10 DFK-PCV 6-16/ 5-G- 1702125 10 DFK-PCV 6-16/ 5-GF- 1702280 10 DFK-PC 6-16/ 6-GFU-SH- 1702057 10 DFK-PCV 6-16/ 6-G- 17021 10 DFK-PCV 6-16/ 6-GF- 1702293 10 DFK-PC 6-16/ 7-GFU-SH- 1702060 10 DFK-PCV 6-16/ 7-G- 1702141 10 DFK-PCV 6-16/ 7-GF- 1702303 10 DFK-PC 6-16/ 8-GFU-SH- 1702073 10 DFK-PCV 6-16/ 8-G- 1702154 10 DFK-PCV 6-16/ 8-GF- 1702316 10 DFK-PC 6-16/ 9-GFU-SH- 1702086 10 DFK-PCV 6-16/ 9-G- 1702167 10 DFK-PCV 6-16/ 9-GF- 1702329 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 577

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Feed-through heders with pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge An inverted feed-through heder to implement touch-proof PCB output (in combintion with IPC 16 ST) To solder onto the PCB A snp-lock mechnism to be operted without tools or clssicl screw connection Wll thicknesses from 1 mm to 3 mm In GF versions, shielding functions cn be executed on the housing wll Suitble for 600 V UL when used in combintion with IPC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Coding pin CS-IPC 16/6 1970016 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Mrker strips SK 5,0 WH:REEL 0805221 801 CCA Dimensionl drwing 12,4 34,55 22 4 19,9 16,4 1,1 Drilling digrm 17,14 1,1 1,7 +34,28 +28,28 17,14 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 76 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 66 66 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.7 / 0.8 x 1.2 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 2 10.16 DFK-IPC 16/ 2-G- 1702413 10 3 20.32 DFK-IPC 16/ 3-G- 1702426 10 4 30.48 DFK-IPC 16/ 4-G- 1702439 10 5.64 DFK-IPC 16/ 5-G- 1702442 10 6 50.80 DFK-IPC 16/ 6-G- 1702455 10 7 60.96 DFK-IPC 16/ 7-G- 1702468 10 8 71.12 DFK-IPC 16/ 8-G- 1702471 10 9 81.28 DFK-IPC 16/ 9-G- 1702484 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 578 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge nd shield connection on the front of the device Rotted 180, without threded flnge Rotted 180, with threded flnge nd shield connection on the front of the device CCA CCA CCA Dimensionl drwing Dimensionl drwing Dimensionl drwing 12,4 34,55 +51,24 +45,24 12,4 34,55 1,1 +34,28 +28,28 12,4 34,55 1,1 +51,24 +45,24 25,62 17,14 25,62 1,1 1,7 1,1 1,7 1,1 1,7 25,6 4 19,8 22 19,9 16,4 25,6 4 19,8 4 1,1 25,62 17,14 25,62 Drilling digrm Drilling digrm Drilling digrm Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls DFK-IPC 16/ 2-GF- 1702730 10 DFK-IPC 16/ 2-GU- 1702497 10 DFK-IPC 16/ 2-GFU- 1702811 10 DFK-IPC 16/ 3-GF- 1702743 10 DFK-IPC 16/ 3-GU- 1702507 10 DFK-IPC 16/ 3-GFU- 1702824 10 DFK-IPC 16/ 4-GF- 1702756 10 DFK-IPC 16/ 4-GU- 1702510 10 DFK-IPC 16/ 4-GFU- 1702837 10 DFK-IPC 16/ 5-GF- 1702769 10 DFK-IPC 16/ 5-GU- 1702523 10 DFK-IPC 16/ 5-GFU- 17028 10 DFK-IPC 16/ 6-GF- 1702772 10 DFK-IPC 16/ 6-GU- 1702536 10 DFK-IPC 16/ 6-GFU- 1702853 10 DFK-IPC 16/ 7-GF- 1702785 10 DFK-IPC 16/ 7-GU- 1702549 10 DFK-IPC 16/ 7-GFU- 1702866 10 DFK-IPC 16/ 8-GF- 1702798 10 DFK-IPC 16/ 8-GU- 1702552 10 DFK-IPC 16/ 8-GFU- 1702879 10 DFK-IPC 16/ 9-GF- 1702808 10 DFK-IPC 16/ 9-GU- 1702565 10 DFK-IPC 16/ 9-GFU- 1702882 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 579

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Feed-through heders with pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Horizontl, with threded flnge nd shield feed-through on the inside of the device An inverted feed-through heder to implement touch-proof PCB output (in combintion with IPC 16 ST) To solder onto the PCB In SH versions, shielding functions cn be executed on the inside of the device s well A snp-lock mechnism to be operted without tools or clssicl screw connection Wll thicknesses from 1 mm to 3 mm Suitble for 600 V UL when used in combintion with IPC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Coding pin CS-IPC 16/6 1970016 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Mrker strips SK 5,0 WH:REEL 0805221 801 CCA 12,4 34,55 11,35 25,6 5,08 8,53 1,1 8,53 Dimensionl drwing 1,1 4 5,08 19,8 25,62 +51,24 +45,24 25,62 Drilling digrm 1,7 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 76 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 300 300 600 Nominl current [A] 66 66 5 Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 1.7 / 0.8 x 1.2 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 2 10.16 DFK-IPC 16/ 2-GF-SH- 1702976 10 3 20.32 DFK-IPC 16/ 3-GF-SH- 1702989 10 4 30.48 DFK-IPC 16/ 4-GF-SH- 1702992 10 5.64 DFK-IPC 16/ 5-GF-SH- 1703001 10 6 50.80 DFK-IPC 16/ 6-GF-SH- 1703014 10 7 60.96 DFK-IPC 16/ 7-GF-SH- 1703027 10 8 71.12 DFK-IPC 16/ 8-GF-SH- 1703030 10 9 81.28 DFK-IPC 16/ 9-GF-SH- 1703043 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 580 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Horizontl, rotted 180, with threded flnge, shield feed-through on the inside of the device Verticl, without threded flnge Verticl, with threded flnge nd shield connection on the front of the device CCA CCA CCA 25,6 8,53 Dimensionl drwing Dimensionl drwing Dimensionl drwing 5,08 1,1 4 12,4 34,55 11,35 19,8 +51,24 +45,24 25,62 34,55 12,4 4,1 22 +34,28 +28,28 17,14 +51,24 +45,24 Drilling digrm Drilling digrm Drilling digrm 34,55 12,4 4,1 25,6 25,62 5,08 1,1 8,53 25,62 1,7 7,72 17,14 1,7 7,72 25,62 1,7 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls DFK-IPC 16/ 2-GFU-SH- 1702895 10 DFK-IPCV 16/ 2-G- 1703056 10 DFK-IPCV 16/ 2-GF- 1703218 10 DFK-IPC 16/ 3-GFU-SH- 1702905 10 DFK-IPCV 16/ 3-G- 1703069 10 DFK-IPCV 16/ 3-GF- 1703221 10 DFK-IPC 16/ 4-GFU-SH- 1702918 10 DFK-IPCV 16/ 4-G- 1703072 10 DFK-IPCV 16/ 4-GF- 1703234 10 DFK-IPC 16/ 5-GFU-SH- 1702921 10 DFK-IPCV 16/ 5-G- 1703085 10 DFK-IPCV 16/ 5-GF- 1703247 10 DFK-IPC 16/ 6-GFU-SH- 1702934 10 DFK-IPCV 16/ 6-G- 1703098 10 DFK-IPCV 16/ 6-GF- 1703250 10 DFK-IPC 16/ 7-GFU-SH- 1702947 10 DFK-IPCV 16/ 7-G- 1703108 10 DFK-IPCV 16/ 7-GF- 1703263 10 DFK-IPC 16/ 8-GFU-SH- 1702950 10 DFK-IPCV 16/ 8-G- 1703111 10 DFK-IPCV 16/ 8-GF- 1703276 10 DFK-IPC 16/ 9-GFU-SH- 1702963 10 DFK-IPCV 16/ 9-G- 1703124 10 DFK-IPCV 16/ 9-GF- 1703289 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 581

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Feed-through heders with pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. When using ferrules for 16 mm 2 conductors, crimp with CRIMPFOX 16 S (see ccessories). The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge, 600 V UL pprovl Feed-through heders for use in combintion with PC 16 plugs A screw connection on the inside of the device Mounting on the housing wll using the snp-lock mechnism to be operted without tools or the clssicl screw connection Wll thicknesses from 1 mm to 3 mm In SH versions, shielding functions cn be executed on the inside of the device s well Suitble for 600 V UL when used in combintion with PC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Screwdriver SZS 1,0 x 4,0 1205066 Mrker strips SK 5,0 WH:REEL 0805221 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Crimping pliers for 10 to 16 mm 2 CRIMPFOX 16 S 1207983 801 CCA 30,55 +29,6 +23,6 44,1 12,4 Dimensionl drwing Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 16 mm 2 Reduction fctor = 0.8 Number of positions = see digrm 19 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 76 1 ) / 16 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.75-16 / 0.75-16 / 18-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-16 Strnded with ferrules with plstic sleeve [mm 2 ] 0.5-16 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-6 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 55 55 - Connection cpcity AWG AWG 20-6 20-6 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 12 Screw thred M4 Tightening torque [Nm] 1.7-1.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 2 10.16 DFK-PC 16/ 2-ST- 1703373 10 3 20.32 DFK-PC 16/ 3-ST- 17036 10 4 30.48 DFK-PC 16/ 4-ST- 1703399 10 5.64 DFK-PC 16/ 5-ST- 17039 10 6 50.80 DFK-PC 16/ 6-ST- 1703412 10 7 60.96 DFK-PC 16/ 7-ST- 1703425 10 8 71.12 DFK-PC 16/ 8-ST- 17034 10 9 81.28 DFK-PC 16/ 9-ST- 1703441 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 582 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge nd shield connection on the front of the device, 600 V UL pprovl With threded flnge nd shield feed-through on the inside of the device, 600 V UL pprovl CCA Dimensionl drwing CCA Dimensionl drwing +45,52 +39,52 44,1 12,4 +45,52 +39,52 44,1 30,55 19 30,55 4,1 5,08 19,6 Representtive derting curve Type: PC 16/...-ST- with DFK-PC 16/...-ST- Current crrying cpcity [A] 108 96 84 72 60 48 36 1 = 2-pos. 24 2 = 5-pos. 12 3 = 9-pos. 0 0 20 2 1 3 60 80 100 Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls DFK-PC 16/ 2-STF- 1703454 10 DFK-PC 16/ 2-STF-SH- 1703616 10 DFK-PC 16/ 3-STF- 1703467 10 DFK-PC 16/ 3-STF-SH- 1703629 10 DFK-PC 16/ 4-STF- 1703470 10 DFK-PC 16/ 4-STF-SH- 1703632 10 DFK-PC 16/ 5-STF- 1703483 10 DFK-PC 16/ 5-STF-SH- 1703645 10 DFK-PC 16/ 6-STF- 1703496 10 DFK-PC 16/ 6-STF-SH- 1703658 10 DFK-PC 16/ 7-STF- 1703506 10 DFK-PC 16/ 7-STF-SH- 1703661 10 DFK-PC 16/ 8-STF- 1703519 10 DFK-PC 16/ 8-STF-SH- 1703674 10 DFK-PC 16/ 9-STF- 1703522 10 DFK-PC 16/ 9-STF-SH- 1703687 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 583

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm Feed-through heders with pin/socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 488. When using ferrules for 16 mm 2 conductors, crimp with CRIMPFOX 16 S (see ccessories). The cutout dimensions nd mounting options for the feed-through versions cn be found on pge 595. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Without threded flnge, 600 V UL pprovl An inverted feed-through heder for touch-proof device output (in combintion with IPC 16 ST) A screw connection on the inside of the device A snp-lock mechnism to be operted without tools or clssicl screw connection Wll thicknesses from 1 mm to 3 mm In SH versions, shielding functions cn be executed on the inside of the device s well. Suitble for 600 V UL when used in combintion with IPC 16 screw nd spring-cge plugs Accessories For ll types Type Pge Coding profile CP-PC RD 1701967 Screws for mounting on the housing pnel DFK-PC 16-SS 1705449 Screwdriver SZS 1,0 x 4,0 1205066 Mrker strips SK 5,0 WH:REEL 0805221 Crimping pliers for 0.25 to 6 mm 2 CRIMPFOX 6 1212034 Crimping pliers for 10 to 16 mm 2 CRIMPFOX 16 S 1207983 801 32,05 +34,28 +28,28 44 12,4 Dimensionl drwing Note derting curves Derting curves, determined s per DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 16 mm 2 Reduction fctor = 0.8 Number of positions = see digrm 22 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 76 1 ) / 16 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 10.16 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.75-16 / 0.75-16 / 18-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-16 Strnded with ferrules with plstic sleeve [mm 2 ] 0.5-16 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] 0.75-6 / 0.75-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-6 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 55 55 - Connection cpcity AWG AWG 20-6 20-6 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 12 Screw thred M4 Tightening torque [Nm] 1.7-1.8 Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 2 10.16 DFK-IPC 16/ 2-ST- 1703690 10 3 20.32 DFK-IPC 16/ 3-ST- 1703700 10 4 30.48 DFK-IPC 16/ 4-ST- 1703713 10 5.64 DFK-IPC 16/ 5-ST- 1703726 10 6 50.80 DFK-IPC 16/ 6-ST- 1703739 10 7 60.96 DFK-IPC 16/ 7-ST- 1703742 10 8 71.12 DFK-IPC 16/ 8-ST- 1703755 10 9 81.28 DFK-IPC 16/ 9-ST- 1703768 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 584 PHOENIX CONTACT

PC 16 series plug-in connectors up to 76 A/16 mm2, pitch 10.16 mm With threded flnge with shield connection on the front of the device, 600 V UL pprovl With threded flnge nd shield feed-through on the inside of the device, 600 V UL pprovl Dimensionl drwing Dimensionl drwing +51,24 +45,24 44 12,4 +51,24 +45,24 44 12,4 32,05 28,6 32,05 28,6 5,08 31,97 Representtive derting curve Type: IPC 16/...-ST- with DFK-IPC 16/...-ST- Current crrying cpcity [A] 90 80 70 60 50 30 1 = 2-pos. 20 2 = 5-pos. 10 3 = 9-pos. 0 0 20 2 1 3 60 80 100 Ambient temperture [ C] Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls 10.16 mm pitch, color: green, for 1.0 to 3.0 mm thick housing wlls DFK-IPC 16/ 2-STF- 1703771 10 DFK-IPC 16/ 2-STF-SH- 1703933 10 DFK-IPC 16/ 3-STF- 1703784 10 DFK-IPC 16/ 3-STF-SH- 1703946 10 DFK-IPC 16/ 4-STF- 1703797 10 DFK-IPC 16/ 4-STF-SH- 1703959 10 DFK-IPC 16/ 5-STF- 17007 10 DFK-IPC 16/ 5-STF-SH- 1703962 10 DFK-IPC 16/ 6-STF- 17010 10 DFK-IPC 16/ 6-STF-SH- 1703975 10 DFK-IPC 16/ 7-STF- 17023 10 DFK-IPC 16/ 7-STF-SH- 1703988 10 DFK-IPC 16/ 8-STF- 17036 10 DFK-IPC 16/ 8-STF-SH- 1703991 10 DFK-IPC 16/ 9-STF- 17049 10 DFK-IPC 16/ 9-STF-SH- 17000 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 585

PC 35 series plug-in connectors up to 125 A/35 mm2, pitch 15 mm Plugs with screw connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 485. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. 2 ) Up to 16 mm 2 = 2.5 Nm 25 mm 2 = 3.5 Nm 35 mm 2 = 4.5 Nm With screw flnge, 600 V UL pprovl High-cpcity plugs with current crrying cpcity of up to 125 A nd connection cpcity of 35 mm 2, solid Unrestricted 600-V-UL pprovl Mximum contct sfety, thnks to n integrted double steel spring Stndrd with screw flnge for secure connection even in pplictions with high levels of vibrtion Low insertion nd withdrwl forces for convenient device connection Comptible with PC 35 HC/ -GF-15,0 bse strip nd IPC 35 HC/...-STGF-15,0 plug component Accessories For ll types Type Pge Mrker strips SK 10,0 WH:REEL 0812188 801 Screwdriver SZS 1,0 x 6,5 1205079 Coding profile CP-HC 1686478 52 Dimensionl drwing 14,5 15 Note derting curves +39,4 Derting curves, determined in ccordnce with DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 35 mm2 Reduction fctor = 0.8 Number of positions = see digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 125 1 ) / 35 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 15 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.5-35 / 0.5-35 / 20-2 Strnded with ferrules without plstic sleeve [mm 2 ] 1-35 Strnded with ferrules with plstic sleeve [mm 2 ] 1.5-35 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] 0.5-6 / 0.5-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-6 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 6 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 115 115 - Connection cpcity AWG AWG 16-2 16-2 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 20 Screw thred M5 Tightening torque [Nm] 2.5-4.5 2 ) Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 2 15.00 PC 35 HC/ 2-STF-15,00 1762592 25 3 30.00 PC 35 HC/ 3-STF-15,00 1762602 25 4 45.00 PC 35 HC/ 4-STF-15,00 1762615 25 5 60.00 PC 35 HC/ 5-STF-15,00 1762628 10 6 75.00 PC 35 HC/ 6-STF-15,00 1762631 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 586 PHOENIX CONTACT

PC 35 series plug-in connectors up to 125 A/35 mm2, pitch 15 mm With screw flnge nd shield, 600 V UL pprovl Dimensionl drwing 150,8 65,8 32,2 19,8 14,5 4,5 14,5 25 17 45 84,4 15 42 14,5 Representtive derting curve Type: PC 35 HC/...-STF-15,00 with PC 35 HC/...-GF-15,00 Current crrying cpcity [A] 200 150 100 50 1 = 2-pos. 2 = 6-pos. 0 0 20 1 2 60 80 100 Ambient temperture [ C] Ordering dt Type Pcs. / Pkt. PC 35 HC/ 4-STF-SH-15,00 1762848 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 587

PC 35 series plug-in connectors up to 125 A/35 mm2, pitch 15 mm Plugs with screw connection Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 485. 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. 2 ) Up to 16 mm 2 = 2.5 Nm 25 mm 2 = 3.5 Nm 35 mm 2 = 4.5 Nm With screw flnge, 600 V UL pprovl Inverted high-performnce plug components with pin contct for touch-proof device outputs or free hnging cble-cble connections Unrestricted 600-V-UL pprovl Mximum contct sfety, thnks to n integrted double steel spring Stndrd with screw flnge for secure connection even in pplictions with high levels of vibrtion Low insertion nd withdrwl forces for convenient device connection Comptible with IPC 35 heder HC/ -GF-15,0 nd with plug component PC 35 HC/...-STF-15,0 Accessories For ll types Type Pge Mrker strips SK 10,0 WH:REEL 0812188 801 Screwdriver SZS 1,0 x 6,5 1205079 Coding profile CP-HC 1686478 Screws for mounting on the housing pnel DFK-PC 35-SS 1700368 41,7 57 Dimensionl drwing 11,6 +16,3 14,5 15 Note derting curves Derting curves, determined in ccordnce with DIN EN 61984 (VDE 0627):2002-09 Representtion bsed on DIN EN 60512-5-2:2003-01 Connected conductor cross section = 35 mm2 Reduction fctor = 0.8 Number of positions = see digrm Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current / conductor cross section [A] / [mm²] 125 1 ) / 35 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 15 Connection cpcity Solid & multi-strnd / strnded [mm²] / [mm²] / AWG 0.5-35 / 0.5-35 / 20-2 Strnded with ferrules without plstic sleeve [mm 2 ] 1-35 Strnded with ferrules with plstic sleeve [mm 2 ] 1.5-35 Multi-conductor connection cpcity (two conductors with the sme cross section) Solid & multi-strnd / strnded [mm 2 ] 0.5-6 / 0.5-6 Strnded with ferrules without plstic sleeve [mm 2 ] 0.5-4 Strnded with TWIN ferrule with plstic sleeve [mm 2 ] 0.5-6 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 115 115 - Connection cpcity AWG AWG 16-2 16-2 - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Stripping length [mm] 20 Screw thred M5 Tightening torque [Nm] 2.5-4.5 2 ) Type of insultion mteril / insultion mteril group PA / I Inflmmbility clss ccording to UL 94 V0 Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 2 15.00 IPC 35 HC/ 2-STF-15,00 1784790 25 3 30.00 IPC 35 HC/ 3-STF-15,00 1784800 25 4 45.00 IPC 35 HC/ 4-STF-15,00 1784813 25 5 60.00 IPC 35 HC/ 5-STF-15,00 1784826 10 6 75.00 IPC 35 HC/ 6-STF-15,00 1784839 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 588 PHOENIX CONTACT

PC 35 series plug-in connectors up to 125 A/35 mm2, pitch 15 mm With threded flnge, 600 V UL pprovl With screw flnge nd shield, 600 V UL pprovl With threded flnge nd shield, 600 V UL pprovl Dimensionl drwing Dimensionl drwing Dimensionl drwing 57 11,6 +16,3 155,8 70,8 155,8 70,8 57 14,5 57 14,5 41,7 4,5 14,5 4,5 14,5 15 15 14,5 15 25 17 42 14,5 45 84,4 25 17 42 14,5 45 84,4 Representtive derting curves of the bove-mentioned plugs Type: IPC 35 HC/...-STF-15,0 with IPC 35 HC/...-GF-15,0 Type: PC 35 HC/..-STF-15,0 with IPC 35 HC/..-STGF-15,0 Current strength [A] 250 225 200 175 150 125 100 75 50 25 0 1 = 2-pos. 2 = 4-pos. 3 = 6-pos. 3 1 2 0 20 60 80 100 Current strength [A] 250 225 200 175 1 150 125 2 3 100 75 50 25 1 = 2-pos. 2 = 4-pos. 3 = 6-pos. 0 0 20 60 80 100 Ambient temperture [ C] Ambient temperture [ C] Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. IPC 35 HC/ 2-STGF-15,00 1784855 25 IPC 35 HC/ 3-STGF-15,00 1784868 25 IPC 35 HC/ 4-STGF-15,00 1784871 25 IPC 35 HC/ 4-STF-SH-15,00 1784842 10 IPC 35 HC/ 4-STGF-SH-15,00 1784907 10 IPC 35 HC/ 5-STGF-15,00 1784884 10 IPC 35 HC/ 6-STGF-15,00 1784897 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 589

PC 35 series plug-in connectors up to 125 A/35 mm2, pitch 15 mm Heders with pin contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 485. The cutout dimensions for the feed-through versions cn be found on pge 595. Heder cn be screwed to the PCB using DFK-PC 35-SS, Order No. 1700368. Screw connection only permitted prior to soldering. Horizontl, 600 V UL pprovl 1 ) Plese observe the derting curves nd lbortory dt sheets. Derting curves of further combintion options on request. Accessories Dimensionl drwing PC 35 HC heders for use in combintion with PC 35 plugs nd IPC 35 heders Horizontl (0 to the PCB) nd verticl (90 to the PCB) versions re vilble Integrted double flnge for fstening with PC 35 connector nd housing pnel Integrted threded flnge for screwing to the PCB For ll types Type Pge Mrker strips SK 10,0 WH:REEL 0812188 801 Coding profile CP-HC 1686478 Screws for mounting on the housing pnel DFK-PC 35-SS 1700368 28,5 +39,4 6 3,45 14,5 15 11 14,5 15 11 6 20,4 3,45 4,6 Drilling digrm 5,4 3,6 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 125 1 ) Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 15 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 115 115 - Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PBT / III Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 3.6 / 2.4 x 2.5 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 2 15.00 PC 35 HC/ 2-GF-15,00 1762741 25 3 30.00 PC 35 HC/ 3-GF-15,00 1762754 25 4 45.00 PC 35 HC/ 4-GF-15,00 1762767 25 5 60.00 PC 35 HC/ 5-GF-15,00 1762770 10 6 75.00 PC 35 HC/ 6-GF-15,00 1762783 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 590 PHOENIX CONTACT

PC 35 series plug-in connectors up to 125 A/35 mm2, pitch 15 mm Verticl, 600 V UL pprovl Horizontl, with shield connection, 600 V UL pprovl Dimensionl drwing Dimensionl drwing 28,5 +39,4 84,4 19,7 15 14,5 14,5 15 45 11 6 20,9 11 6 20,4 4,6 8,75 3,45 28,5 6 11 8,75 14,5 15 4,6 6 11 3,45 14,5 15 45 Drilling digrm Drilling digrm 3,6 5,4 5,4 3,6 Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. PCV 35 HC/ 2-GF-15,00 1762796 25 PCV 35 HC/ 3-GF-15,00 1762806 25 PCV 35 HC/ 4-GF-15,00 1762819 25 PC 35 HC/ 4-GF-SH-15,00 1762851 25 PCV 35 HC/ 5-GF-15,00 1762822 10 PCV 35 HC/ 6-GF-15,00 1762835 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 591

PC 35 series plug-in connectors up to 125 A/35 mm2, pitch 15 mm Heders with socket contct Notes: In ccordnce with DIN EN 61984, COMBICON plug-in connectors hve no switching power. During designted use, they must not be plugged in or disconnected when crrying voltge or under lod. COMBICON select You will find the possible plug-in connector combintions in COMBICON select t: www.phoenixcontct.net/products or strting on pge 485. The cutout dimensions for the feed-through versions cn be found on pge 595. The heder cn be screwed to the PCB with DFK-IPC 35-SS Order No. 1703166. Screw connection only permitted prior to soldering. Horizontl, 600 V UL pprovl Accessories Dimensionl drwing Inverted IPC 35 HC heders for implementing touch-proof PCB output (in combintion with IPC 35 HC plugs) or PCB/PCB connection (in combintion with PC 35 heders) Horizontl (0 to the PCB) nd verticl (90 to the PCB) versions re vilble DFK versions for fixing in the housing pnel Integrted threded flnge for screwing to the PCB For ll types Type Pge Mrker strips SK 10,0 WH:REEL 0812188 801 Coding profile CP-HC 1686478 Screws for mounting on the housing pnel DFK-IPC 35-SS 1703166 28,5 44,9 +39,4 6 4,45 14,5 15 11 14,5 19,7 15 11 6 4,45 9,6 4,6 Drilling digrm Ø3,3 Ø5,4 Technicl dt Technicl dt in ccordnce to IEC / DIN VDE Rted current [A] 125 Rted insultion voltge for pollution degree 2 [V] 1000 Pitch [mm] 15 Insultion coordintion Surge voltge ctegory / pollution degree III / 3 III / 2 II / 2 Rted insultion voltge [V] 1000 1000 1000 Rted surge voltge [kv] 8 8 8 Approvl dt (UL/CUL) Use Group B C D Nominl voltge [V] 600 600 - Nominl current [A] 115 115 - Connection cpcity AWG AWG - - - Approvl dt (CSA) Use Group B C D Nominl voltge [V] - - - Nominl current [A] - - - Connection cpcity AWG AWG - - - Generl dt Type of insultion mteril / insultion mteril group PBT / III Inflmmbility clss ccording to UL 94 V0 Drill hole dimeter / pin dimensions [mm] 3.6 / 2.4 x 2.5 mm Ordering dt Type Pcs. / Pkt. No. of pos. Dim. [mm] 2 15.00 IPC 35 HC/ 2-GF-15,00 1784910 25 3 30.00 IPC 35 HC/ 3-GF-15,00 1784923 25 4 45.00 IPC 35 HC/ 4-GF-15,00 1784936 25 5 60.00 IPC 35 HC/ 5-GF-15,00 1784949 10 6 75.00 IPC 35 HC/ 6-GF-15,00 1784952 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 592 PHOENIX CONTACT

PC 35 series plug-in connectors up to 125 A/35 mm2, pitch 15 mm Verticl, 600 V UL pprovl Horizontl, for fixing in the housing pnel with shield connection, 600 V UL pprovl Verticl, for fixing in the housing pnel with shield connection, 600 V UL pprovl Dimensionl drwing Dimensionl drwing Dimensionl drwing 28,5 +39,4 31,7 +47,4 44,9 +47,4 4,6 6 11 8,75 19,7 15 14,5 19,7 15 14,5 19,7 15 14,5 6 11 11 6 11 6 7,6 4,45 9,6 7,6 44,9 30,1 44,9 14,5 15 4,6 6 4,45 14,5 15 11 6 10,35 4,6 11 14,5 15 Drilling digrm Drilling digrm Drilling digrm 8,75 Ø3,6 Ø5,4 Ø3,3 Ø5,4 8,75 Ø3,6 Ø5,4 Ordering dt Ordering dt Ordering dt Type Pcs. / Pkt. Type Pcs. / Pkt. Type Pcs. / Pkt. IPCV 35 HC/ 2-GF-15,00 1793558 25 DFK-IPC 35 HC/ 2-GF-15,00 1784965 25 DFK-IPCV 35 HC/ 2-GF-15,00 1793600 25 IPCV 35 HC/ 3-GF-15,00 1793561 25 DFK-IPC 35 HC/ 3-GF-15,00 1784978 25 DFK-IPCV 35 HC/ 3-GF-15,00 1793613 25 IPCV 35 HC/ 4-GF-15,00 1793574 25 DFK-IPC 35 HC/ 4-GF-15,00 1784981 25 DFK-IPCV 35 HC/ 4-GF-15,00 1793626 25 IPCV 35 HC/ 5-GF-15,00 1793587 10 DFK-IPC 35 HC/ 5-GF-15,00 1784994 10 DFK-IPCV 35 HC/ 5-GF-15,00 1793639 10 IPCV 35 HC/ 6-GF-15,00 1793590 10 DFK-IPC 35 HC/ 6-GF-15,00 1785003 10 DFK-IPCV 35 HC/ 6-GF-15,00 1793642 10 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com For dditionl informtion, visit www.phoenixcontct.net/products PHOENIX CONTACT 593

Feed-through plug-in connectors Routing cbles through pnels COMBICON power feed-through plugin connectors enble you to route conductor through device housing efficiently nd without ny gps. PC 5 nd PC 16 series feed-through plug-in connectors nd heders re inserted in the housing opening nd secured with the quick snp-lock mechnism 2 without using ny dditionl tools. As n lterntive to the snp-lock mechnism, ech plug-in connector lso hs screw fixings 1 for the housing pnel. The corresponding screws cn be ordered using 1705449. In ddition to solder-in versions, the version with screw connection inside the device is prticulrly esy-mintennce nd fst lterntive. Cble/cble connections cn therefore be used in devices with conductor cross section of up to 16 mm2 nd currents of up to 76 A. The inverted design, which supports prcticl connection options, completes the rnge of feed-through plug-in connectors. In this wy, live device output, for exmple, cn be designed very esily with shock protection. DFK plug-in connectors in STF/STF-SH versions 3 lso offer the option of routing shielding functions to or through the housing pnel. 1 1 Screw fixing 3 2 Snp-lock mechnism 2 3 Shield routed through with the STF-SH version Sheet metl cutouts for DFK-PC 4 Sheet metl cutouts for PC 35 DFK-PC 4/...G--FS4,8 DFK-PC 4/...-GF- PC 35 HC/...-GF-15 3,3 +26,4 ±0,1 +15,2 ±0,1 +,4 ±0,15 +29 ±0,15 +17,3 ±0,15 13,8 ±0,1 6,5 ±0,1 d ±0,1 17,5 ±0,1 22 ±0,1 29,5 21,4 16,2 6 b ±0,3 c ±0,1 Ø3,4 ±0,1 9,3 ±0,1 Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 594 PHOENIX CONTACT