Product review North America Duty charts 7 RPM - Hz - North America 9 IPL. 7 IPL IPL. IPL IPL. RPM - Hz - North America IPL. IPL IPL. IPL Single-head pumps: Single stage inline, flanged, long coupled, mechanical sealed dry rotor pump Application: For pumping heating water, water/glycol-mixtures, cooling/cold water. Model Number Designation: IPL.-/- IPL Inline single stage centrifugal pump. Flange size in inch Maximal head in feet Maximal flow in US gpm Number of poles =,7 rpm, =, rpm Basic technical data: Temperature range: F to + F (- C to + C) Power supply (smaller horsepower): ~/- volt, Hz Power supply (larger horsepower): ~-/, 7 volt, Hz Motor options: ODP, TEFC, Premium and "Super E" efficiency types, and pole available (, and,7 RPM) Flange connection: ½" to " with ¼" pressure gauge tappings Maximum operating pressure PSI ( bar), minimum inlet pressure NPSHreq dependant (see detailed curves) Material: Pump volute: cast iron Impeller: engineered composite Shaft: L stainless steel stub shaft Mechanical seal: QQXGG (silicium carbide seal faces, HNBR elastomers) Contruction: Single stage low pressure centrifugal, inline design with mechanical seal Baldor NEMA standard motors Advantages: Pump flanges # raised face ANSI std Cataphoretic coating for corrosion protection Pump feet drilled and tapped for ease of installation All bolts "non-metric"
Function, Equipment & Technical data Approved fluids (other fluids on request) Heating water Water-glycol-mixtures at - Vol.-% glycol and fluid temperature F > Vol.-% glycol > Vol.-% glycol and fluid temperature > F Cooling and cold water Heat transfer oil Additive dependant please contact WILO Custom version please contact WILO Application limits Standard version with nominal pressure, P max. [PSI] Temperature range [ F] Ambient temperature, max. [ F] Installation in closed buildings Outdoor installation ( bar) to (- C to + C) ( C) Custom version please contact WILO Typical flange sizes Nominal diameters for connection.",.", ",." and " Flanges (acc. ASME Class ) <," Wilo-specific," ASME Class Flanges with tappings NPT / - NPT Materials Pump housing and lantern Impeller standard version cast iron fibre reinforced plastic (polypropylene or noryl) Impeller special version Stub shaft Mechanical seal standard version Mechanical seal special version (on request, against extra costs) ) Other mechanical seals (on request, against extra costs) Motor stainless steel L QQXGG (silicium carbide seal faces, HNBR elastomers) AQEGG Motor voltages ~ / - V, Hz ( HP) ~- / V, Hz ( HP) ~7 V, Hz ( HP) Speed [RPM] 7 or Integrated full motor protection Protection class Insulation class integrated protection PTC/PTO on request (on-site trip unit required) ODP (TEFC on request) F As at: 9/9 - Subject to change without prior notice
Function, Equipment & Technical data Installation possibilities Pipe installation Support bracket installation = available, = not available
.-/- Speed 7 RPM.-/- 7 RPM - Hz - North America Ø. IPL.-/- % % % %.% 7 % % % %. hp... Ø. P [hp]... Q[l/s].... P [kw] Ø..... As at: 9/9 - Subject to change without prior notice
.-/9- to.-/- Speed 7 RPM Ø. Ø. IPL.-/9- IPL.-9/9- % % %.-/9- -.-/- 7 RPM - Hz - North America %.% hp Ø.9 Ø. IPL.-/9- IPL.-/- 7.%.% %.7 hp % %. hp. hp 7 Q[l/s] Ø. P [hp] P [kw]. Ø.. Ø... Ø.9.. Ø...
-/- to -/- Speed 7 RPM Ø. Ø. Ø. IPL -/- IPL -/- IPL -/- % % 7% 7.7% -/- - -/- 7 RPM - Hz - North America 7.7% 7% Ø. IPL -/-.% 7.% hp %. hp.7 hp. hp Ø. P [hp].. Ø.. Ø. Ø.. Q[l/s] P [kw]. Ø... As at: 9/9 - Subject to change without prior notice
.-/7- to.-/- Speed 7 RPM Ø. Ø. % % % Ø. %.7 hp % %. hp hp P [hp].... Ø. Ø. IPL.-/7- IPL.-/- IPL.-7/- IPL.-/- 7.%.%.7%.%.-/7- -.-/- 7 RPM - Hz - North America. hp Ø. Ø. Ø. Ø. Q[l/s] 9 7... P [kw] 7
-/- to -/- Speed 7 RPM Ø. IPL -/- % % % 7% -/- - -/- 7 RPM - Hz - North America 9 7 Ø.9 IPL -/- % % % 7.% 7% 7.% % % % %. hp % hp Q[l/s] Ø. P [hp] P [kw].. Ø.... Ø.9.. As at: 9/9 - Subject to change without prior notice
.-9/- to.-/9- Speed RPM 7.-9/- -.-/9- RPM - Hz - North America Ø. Ø.7 IPL.-9/- IPL.-/9- % 7% %.% % Ø. IPL.-/9-.%.7% 7%. hp %. hp.7 hp 7 Q[l/s] Ø. P [hp] P [kw].. Ø... Ø.7. Ø... 9
-/7- to -/- Speed RPM 7 -/7- - -/- RPM - Hz - North America Ø. Ø. IPL -/7- IPL -/- % % %.% Ø. IPL -/-.%.% % % hp % hp. hp Ø. P [hp]. Ø.. Ø.. Ø.. Q[l/s] P [kw]... As at: 9/9 - Subject to change without prior notice
.-/7- to.-/- Speed RPM 7 Ø. Ø. IPL.-/7- IPL.-/- % % % % % % 9.% %.-/7- -.-/- RPM - Hz - North America 7% % % % % % hp hp Q[l/s] Ø.. P [hp] P [kw]. Ø... Ø...
-/- Speed RPM Ø. IPL -/- % 7% 7% 7.7% 7% 7% -/- RPM - Hz - North America % hp Ø. P [hp] Ø. Q[l/s] P [kw]..... As at: 9/9 - Subject to change without prior notice
Wiring diagrams, Motor Data Wiring diagramms Wiring diagrams are specific to and included with each motor. Check rotation on start-up on both single and three phase motors. Motor data nominal Speed Motor Power Phase Voltage Frequency Full Load Current n P - U f I n [RPM] [HP] ca. [kw] [ ] [V] [Hz] [A] 7.. / - /. - 7..7 / -. /. -. 7.7. / -. /. -. 7.7 / -. / 7. -.7 7.7 - /. /.7 7.7 7. 7.. / - / 9. - 9 7.. - / -. /. 7.. 7.9.7. / - 9. /.9 -.7.7 / - / 7.9-7..7 - /.7-. /..7 7.. / - /. -. - /. -. /.9. 7.. - /. - /. 7 Motor allocation Pump Type nominal Speed Motor Power Pump Type nominal Speed Motor Power n P n P [RPM] [HP] ca. [kw] [RPM] [HP] ca. [kw] IPL.-/- 7.. IPL.-/- 7.. IPL.-/9-.7. IPL.-/9-7..7 IPL.-/9-.7 IPL.-9/9-7.7. IPL.-9/-,, IPL.-/9-7.7 IPL -/- 7..7 IPL -/-.7 IPL -/- 7.7. IPL -/-.. IPL -/- 7 IPL -/7-. IPL -/- 7.. IPL.-/- 7..7 IPL.-/-. IPL.-7/- 7.7. IPL.-/7-. IPL.-/- 7.7 IPL.-/7-7.. IPL -/- 7.7 IPL -/-. IPL -/- 7..
Wiring diagrams, Motor Data Dimension drawing c a II III l max* x DN ø d x o e f lo ø g* m b b p II b * b max* ø k ø D n x d L II gauge tappings ¼- NPT III vent plug / *dimension dependant on motor manufacturer Dimensions, weights US units Pump Type DN a b b b * b max * c e f g* l l max * m o p x Weight IPL.-/- ¼" ¾ ¾ / ¼ 9 / 9 / 9 / / 7 7 / ½ / / 7 /. IPL.-/- ½" / / ¾ ¼ 9 9 / 9 / 9 / / 7 7 7 / ½ / / 7 /.7 IPL.-/9- ½" / / ¾ ¼ 9 9 / 9 / 9 / / 7 7 7 / ½ / / 7 /. IPL.-9/9- ½" / / ¾ ¼ 9 9 / 9 / 9 / / / / ½ / / 7 /. IPL.-/9- ½" / / ¾ ¼ 9 9 / 9 / 9 / / 7 7 7 / ½ / / 7 / 7.7 IPL -/- " ½ ½ / ¼ 9¾ / 9 / / 7 7 9 / ¾ / / 7 /. IPL -/- " ½ ½ / ¼ 9¾ / 9 / / 7 7 9 / ¾ / / 7 / 7. IPL -/- " ½ ½ / ¼ 9¾ / 9 / / 7 7 9 / ¾ / / 7 /. IPL -/- " ½ ½ / ¼ 9¾ / 9 / / 7 7 9 / ¾ / / 7 / 9. IPL.-/- ½" ¾ / 7 / ¼ / / 9 / / 7 ½ 7 / ¾ / / 7 / 7.7 IPL.-7/- ½" ¾ / 7 / ¼ / / 9 / / / ½ 7 / ¾ / / 7 /. IPL.-/- ½" ¾ / 7 / ¾ / / 9 / / 7 ½ 7 / ¾ / / 7 / 9. IPL.-/7- ½" ¾ / 7 / ¾ / / 9 / / 7 ½ 7 / ¾ / / 7 / 9.7 IPL -/- " / / ¾ 7 / / 9 / / 7 / 7 / / 7 /. IPL -/- " / / ¾ / / 9 / / 7 / 7 / / 7 /.7 IPL.-/9- ½" / / 9 / ¼ / 9 / 9 / / 7 7 / / / 7 /. IPL.-/9- ½" / / 9 / ¼ / 9 / 9 / / 7 7 / / / 7 /. IPL.-9/- ½" / / 9 / ¼ / 9 / 9 / / 7 7 / / / 7 /. IPL -/- " ¼ ½ / ¼ ¾ 9 / 9 / / 7 ½ 7 7 / ¾ / / 7 /.7 IPL -/- " ¼ ½ / ¼ ¾ 9 / 9 / / 7 ½ 7 7 / ¾ / / 7 /. IPL -/7- " ¼ ½ / ¼ ¾ 9 / 9 / / 7 ½ 7 7 / ¾ / / 7 / 77. IPL.-/- ½" / 7 / / ¾ 9 / / 9 / / 7 ½ ¾ / 7 / 9. IPL.-/7- ½" / 7 / / ¾ 9 / / 9 / / 7 ½ ¾ / 7 /.7 IPL -/- " / ¼ / ¾ / 9 / / 7 / 7 / 7 / 97.9 [in] [lbs] As at: 9/9 - Subject to change without prior notice
Wiring diagrams, Motor Data Dimensions, weights SI units Pump Type DN a b b b * b max * c e f g* l l max * m o p x Weight [mm] [in] [mm] [kg] IPL.-/- 7. 9... 9. 9 77. 79.. 9.7 /.7. IPL.-/- 7. 9.... 9 77.... /..7 IPL.-/9-7. 9.... 9 77.... /.. IPL.-9/9-7. 9.... 9 7.. 9.. /.. IPL.-/9-7. 9.... 9 77.... /.. IPL -/-.9. 9.7. 7. 77... 7. /.. IPL -/-.9. 9.7. 7. 77... 7. /.. IPL -/-.9. 9.7. 7. 77... 7. /.. IPL -/-.9. 9.7. 7. 77... 7. /.. IPL.-/- 9..... 77..9. 7. / 7..7 IPL.-7/- 9..... 7..9. 7. / 7.. IPL.-/- 9..... 77..9. 7. / 7..9 IPL.-/7-9..... 77..9. 7. / 7..7 IPL -/-... 77. 77... 77. /. 7. IPL -/-... 7. 77... 77. /.. IPL.-/9-7. 79. 9... 9 77... 7. /.. IPL.-/9-7. 79. 9... 9 77... 7. /.. IPL.-9/- 7. 79. 9... 9 77... 7. /., IPL -/-.....7 9 77. 9... /. 9. IPL -/-.....7 9 77. 9... /. IPL -/7-.....7 9 77. 9... /. IPL.-/- 9. 99. 9... 77..9 7.9 7. / 7.. IPL.-/7-9. 99. 9... 77..9 7.9 7. / 7. 9. IPL -/-.... 77.. 9.9 77. / 9.. Flange Dimensions DN Ø D Ø d Ø k n x d L [in] [mm] [in] [mm] [in] [mm] [units x in] [units x mm] ¼" ¾ 7 / 7 ½ 9 x 9 / x ½" ¾ 7 / 7 ½ 9 x 9 / x " ¼ 7 / 7 x 9 / x ½" 7 77. / 7. ½ 9.7 x ¾ x 9 " 7½ 9. /.. x ¾ x 9