ASD LED Canopy Lights are designed to withstand the elements while producing a lot of light. Our low profile canopy has an acrylic lens which is UV resistant and vandal-resistant. This is an ideal replacement for an old, energy wasting metal halide. Using SMD technology, there are no costly bulbs to change virtually eliminating maintenance for years to come. Our Canopy fixtures are wet location rated and come with a 5 year warranty and 60,000 hour L70 lifespan. These fixtures are widely used in banks, gas stations, convenience stores, and drive-thru locations. FEATURES AND BENEFITS: Economical replacement for an old outdated metal halide canopy light fixture Low profile design Finish: black, white Luminous efficiency 105-115 lm/w SMD chips for brighter light No maintenance Operating temperature of -40 to 104 Wet location IP65 L-70 Life > 60,000 hrs culus certified DesignLights Consortium (DLC) listed (Classification: Standard) 5 Year warranty ORDERING MATRIX: Family Modification Watts Dimmable CCT Finish ASD-CAN 01 XX N 50 N LED SMD Canopy Flat 30 = 30 W Non-dimmable 5,000 K Blank = Black 50 = 50 W W = White 75 = 75 W IP65 rated LED SMD CANOPY FLAT: Model Watts Dimming Compatible CCT Lumens Dimensions (LxWxH) ASD-CAN01-30N50 30 W NO 5,000 K 3,178 lm 9 15/16" x 9 15/16" x 3 3/8" 30 W NO 5,000 K 3,178 lm 9 15/16" x 9 15/16" x 3 3/8" ASD-CAN01-50N50 50 W NO 5,000 K 5,695 lm 9 15/16" x 9 15/16" x 3 3/8" 50 W NO 5,000 K 5,695 lm 9 15/16" x 9 15/16" x 3 3/8" ASD-CAN01-75N50 75 W NO 5,000 K 8,406 lm 9 15/16" x 9 15/16" x 3 3/8" 75 W NO 5,000 K 8,406 lm 9 15/16" x 9 15/16" x 3 3/8"
PRODUCT SPECIFICATIONS: Construction & Materials Lens Acryl Reflector Aluminum Housing Aluminum Finish Black, White Weight ASD-CAN01-30N50 4.31 lb (1.96 kg) ASD-CAN01-75N50 4.82 lb (2.19 kg) ASD-CAN01-50N50 4.62 lb (2.1 kg) Environmental System Work Environment Suitable for Wet Locations, IP65 Operating Temperature -40 to 104 (-40 to 40 ) L-70 Life > 60,000 hrs Optical System Luminous Flux ASD-CAN01-30N50 3,178 lm ASD-CAN01-75N50 8,406 lm ASD-CAN01-50N50 5,695 lm Color Temperature 5,000 K CRI >80 Electrical System Input Voltage 100~277V AC 50/60 Hz Max input current ASD-CAN01-30N50 0.3 A ASD-CAN01-75N50 0.8 A ASD-CAN01-50N50 0.5 A Off State Power 0 W Power Consumption ASD-CAN01-30N50 30 W ASD-CAN01-75N50 75 W ASD-CAN01-50N50 50 W Power Factor 0.95 Output voltage ASD-CAN01-30N50 25-36 V ASD-CAN01-75N50 60-90 V ASD-CAN01-50N50 25-36 V Max output current ASD-CAN01-30N50 900 ma ASD-CAN01-75N50 900 ma ASD-CAN01-50N50 1,500 ma Warranty & Certifications 5-year limited warranty DesignLights Consortium (DLC) listed culus certified E473804 The LED Canopy Flat is designed to install as a surface mounted luminaires.
9.92 (252 mm) 3.4 (86 mm) 30 W 5,000 K LIGHT DISTRIBUTION CURVE UNIT:CD ±180 3.3ft C0 PLANE ISOLUX DIAGRAM (UNIT:lx) 9.92 (252 mm) -90-120 -150 150 120 90 6.6ft 245.04 490.07-60 735.11 60-30 980.15 1225.18 0 30 1225.18 980.15 735.11 13.1ft 0.0m 3.3m 6.6m 490.07 245.04 0.00-180 -135 0 45-45 90 180-90 135 C22.5(Max): C0/C180: C90/C270: 11.11654 22.23318 33.34972 44.46626 55.5829 66.69944 77.81598 88.93262 100.0493 50 W 5,000 K 75 W 5,000 K LIGHT DISTRIBUTION CURVE UNIT:CD ±180 3.3ft C0 PLANE ISOLUX DIAGRAM (UNIT:lx) LIGHT DISTRIBUTION CURVE UNIT:CD ±180 3.3ft C0 PLANE ISOLUX DIAGRAM (UNIT:lx) -150 150-150 150-120 120 6.6ft -120 120 6.6ft -90 90-90 90 428.81 642.17 857.61 1284.35-60 1286.42 60-60 1926.52 60-30 1715.22 2144.03 0 30-30 2568.69 3210.86 0 30 2144.03 3210.86 1715.22 1286.42 13.1ft 0.0m 3.3m 6.6m 2568.69 1926.52 13.1ft 0.0m 3.3m 6.6m 857.61 1284.34 428.81 0.00-180 -135 0 45-45 90 180-90 135 C112.5(Max): C0/C180: C90/C270: 18.45418 36.90836 55.36264 73.81682 92.271 110.7249 129.1794 147.6338 166.0874 642.17 0.00-180 -135 0 45-45 90 180-90 135 C292.5(Max): C0/C180: C90/C270: 29.33253 58.66496 87.99749 117.3299 146.6626 175.9953 205.3271 234.6598 263.9926
PACKAGE CONTENTS: Description Q-ty LED SMD Canopy Flat Fixture 1 Fixing plate (A) 1 Large mounting brackets (B) 4 Small mounting brackets (C) 4 Wire clip (D) 1 Bolt (E) 4 Washer (F) Lock washer (G) 4 Screw (H) 6 Gasket (I) 1 Box 1 Installation Instructions 1 A B C D E F G H I ELECTRICAL SCHEMATIC DIAGRAM FIXTURE Power connector 120~277V 50/60 Hz L N G L (live/hot) connect black N (neutral) connect white Ground connect green DRIVER WARNING RISK OF PERSONAL INJURY READ and follow all WARNINGS and installation instructions. Keep or give to the owner for future reference. Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product. Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Risk of Fire: Minimum 90 С supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. ASD assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.
INSTALLATION GUIDE IMPORTANT SAFETY INFORMATION: Please read all the instructions below before installation. Make sure that the supply voltage corresponds to the rated product voltage. The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes. If the product is damaged, do not use it. INSTALLATION STEPS 1. Remove screws, take off lens and reflector. 2. Replace the inside cap pointed in picture 1 with the interior gasket (supplied), insert power cord through the back of the fixture into the gasket. 3. Connect wires as shown in picture 3. 4. Put lens and reflector back, tighten screws. 1. 3. 4. Option: If so desired, instead of putting the cord through the back of the fixture, remove one of the side caps shown in picture 2, install ¾ gasket (customer supplied), and insert power cord into fixture and connect the wires. 2. inside cap
CONNECTING MULTIPLE FIXTURES TO ONE SWITCH 1. Remove screws, remove lens and reflector. Remove 2 side caps and install two ¾ gaskets (customer supplied). Insert power cord and cord going to the next linking fixture through ¾ gaskets (customer supplied). 2. Connect wires as in the picture below, reattach lens and reflector. 1. 2. gasket (customer supplied) PENDANT WITH 3/4 INCH THREADED PENDANT STEM 1. Pull electrical wires through pendant stem (stem not included and should be purchased separately) and attach them to the housing wires. Black for Line, White for Neutral, Green for Ground. 2. Screw the pendant stem into the hole on the top of canopy light. Installation is complete. 1. 2.
INSTALLATION WITH BRACKETS 1. Screw 4 large mounting brackets (supplied) to canopy fixture. 2. Using expansion anchors (not supplied, should be bought separately), screw mounting brackets to the ceiling/wall. Installation is complete. 1. 2. INSTALLATION WITH A FIXING PLATE 1. Screw small mounting brackets and wire fixing clip to canopy fixture. 2. Screw fixing plate to the ceiling using expansion anchors (not supplied, should be bought separately). 1. 2. 3. Attach canopy fixture to fixing plate with mounting brackets. 4. Screw securing bracket attached to fixing plate to canopy fixture. Installation is complete. 3. 4.
ORDERING INFORMATION LED SMD CANOPY FLAT ORDERING INFORMATION: Model Watts UPC GTIN 14 Product Code Pcs in one Carton Carton Size Carton Weight ASD-CAN01-30N50 30 W 857622006398 10857622006395 025.0101 8 21.26"x17.72"x11.22" 39.82 lbs 30 W 819201020003 10819201020000 025.0104 8 21.26"x17.72"x11.22" 39.82 lbs ASD-CAN01-50N50 50 W 857622006404 10857622006401 025.0102 8 21.26"x17.72"x11.22" 42.24 lbs 50 W 819201020010 10819201020017 025.0105 8 21.26"x17.72"x11.22" 42.24 lbs ASD-CAN01-75N50 75 W 857622006411 10857622006418 025.0103 8 21.26"x17.72"x11.22" 43.56 lbs 75 W 819201020027 10819201020024 025.0106 8 21.26"x17.72"x11.22" 43.56 lbs