Lifting loads, cutting costs Innovative FLENDER drives: system-based flexible and precise gear unit solutions for every crane application. siemens.com/drive-technologies
Drive solutions from Siemens: Maximum cost efficiency, highest precision and absolute reliability The optimum solution for each and every crane: mechanical drive services from Siemens the system supplier Whether it involves cranes for terminals, industry or shipyards: The highest degree of precision, quality, availability and reliability are always demanded the same goes for maximum cost efficiency. With FLENDER drives from Siemens, you have a permanent handle on all of these factors. Our extensive portfolio of products, systems and solutions provide you with the optimum solution for each and every drive task.
FLENDER hoisting/luffing gear units No matter which gear unit you have selected: with the FLENDER gear units, you have always chosen an economical solution that is perfectly tailored to your needs. Aside from a compact standard gear unit series, Siemens offers application specific gear units having a large overall center distance. The gear units are perfectly suited for applications having motor and cable drum mounted in parallel. The gear unit series is optimally suited for container cranes, gantry cranes, pouring cranes, tower slewing cranes, offshore cranes and draw works. FLENDER rotating/swivel gear units When it comes to positioning driven loads, our modular FLENDER slewing gear drives are first choice. E.g. in cranes, excavators and drilling rigs. On the drive side, you may select between short and a long cylindrical lantern gear versions. The mounted drive pinion is implemented according to your needs. Whether electric motors or fast and slow running hydraulic motors: on the drive side, we can offer you solutions that in some cases have already been standardized. FLENDER trolley/travel gear units Whether trolley gear, rail gear or tire gear: each application places specific demands on how the gear unit need to be designed these demands are perfectly fulfilled by our FLENDER gear unit series. It convinces through a maximum of safety, highest quality and long service life even when put under heavy strains., e. g. container cranes. Drive torques of between 10,000 to 130,000 Nm can be realized. Our FLENDER trolley running /travel gear units are available in helical and helical bevel gear versions, 3- as well 4 stage gear units. Advantages at a glance extensive standard gear unit series standard application gear unit series high flexibility for project-related special solutions
From left to right: FLENDER hoisting gear units FLENDER trolley/travel gear units FLENDER rotating/swivel gear units FLENDER hoisting/luffing gear units The extensive FLENDER portfolio of gear units at a glance Hoisting- /Luffing gear unit Rotating-/Swivel gear units Types helical/bevel-helical gear unit (H/B) helical gear unit with extended center distance (K) helical gear unit with extended center distance (K) Planetary gear unit (P) Sizes 24 (size 05 to 28) 10 (size 05 to 14) 8 (size 215 bis 222) 24 (size 10 to 34) Gear stages 3 and 4 stages 3 and 4 stages 3 and 4 stages 2 and 3 planetary stages Power ratings up to 4,500 kw up to 1,000 kw up to 4,500 kw up to 10,000 kw Transmission ratio Mounting positions i = 16 450 i = 16 250 i = 18 140 i = 25 900 horizontal/vertical horizontal/vertical horizontal horizontal Nominal torques up to 1,400,000 Nm up to 109,000 Nm up to 540,000 Nm up to 2,000,000 Nm Trolley/travel gear units (Emergency drives) Types helical/bevel-helical gear unit (H/B) helical gear unit with extended center distance (K) helical gear unit (V/W) helical/bevel-helical geared motors (SMD Tübingen) Sizes 10 (size 05 to 14) 10 (size 05 to 14) 8 (size 05 to 12) 11 (size 28 to 188) Gear stages 3 and 4 stages 3 and 4 stages 3 and 4 stages 2 and 3 stages Power ratings up to 1,000 kw up to 1,000 kw up to 800 kw up to 200 kw Transmission ratio Mounting positions i = 10 450 i = 16 250 i = 12,5 400 i = 8 300 horizontal/vertical horizontal/vertical horizontal/vertical horizontal/vertical Nominal torques up to 130,000 Nm up to 109,000 Nm up to 75,000 Nm up to 20,000 Nm
Standardized or individual: competent support for the optimum drive solution The globally unique portfolio to increase your competitiveness Every sector requires its specific solutions and competent technical support. With our FLENDER gear unit portfolio, we from Siemens have experience gained from over 110 years and the power of innovation combined with wellfounded sector knowledge and comprehensive knowhow. Our range of gear units offers you both standardized as well as individual drive components and solutions to address the widest range of requirements and applications. The solutions well-proven in practice set themselves apart as a result of the highest degree of reliability, flexibility and long service life. The key to success is our personal contact with you. This extends over the complete life cycle starting from the first technical consultation. We support you in your specific sector at the process, product and system levels so that you can consequentially utilize all of the optimization potential. Our open Totally Integrated Automation (TIA) system architecture optimally helps you achieve this. Totally Integrated Automation ensures that all of the compo-nents perfectly operate with one another. You profit from a significant reduction in costs and the number of interfaces, higher plant and system availability, higher degree of planning and investment security and an increased level of user-friendliness to sustainably increase your degree of competitiveness. Always there for you everywhere our service and support Extensive know-how, absolute reliability and the highest efficiency are decisive issues in your business. It is good news that this also applies to your partner. As a Siemens customer, you can depend on our excellent service and support. From technical consultation and planning, through engineering, operation and maintenance up to expansions and modernization: Our experienced specialists are there to support and help you over the complete life cycle. Locally around the globe.
Siemens AG Industry Sector Mechanical Drives Alfred-Flender-Straße 77 46395 BOCHOLT GERMANY Subject to change without prior notice 05/11 Order No: E20001-A90-P900-V1-7600 DISPO 27904 SCHÖ/34423 GD.MD.AP.XXXX.52.1.04 WS 06111.5 Printed in Germany Siemens AG 2011 The information provided in this brochure contains merely general descriptions or characteristics of performance which in actual case of use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.