Submersible Dewatering Pumps
2
Dewatering Solutions for the Real World In the real world time is money, and worksites have no time for unwanted water. Sulzer has the solutions in a complete pump range for reliable dewatering. This brochure is an overview of Sulzer s submersible de watering pumps, which are the result of more than years of technical and real-world experience. Each pump type is presented with its key features, as well as dimensions, performance curves and the most important technical data for specific pump models. Whether you work in mining, tunneling or construction, the pumps here are your best insurance against waterrelated downtime. From purchasing to service, you can turn to Sulzer for dewatering solutions that make a difference in the real world. CONTENT PAGE Dewatering Solutions for the Real World 3 Submersible Drainage Pumps J (small) - XJ (medium) 6-7 J (large) 8-9 Submersible Drainage Center-Line Pumps JC and XJC 1-11 Submersible Sludge Pumps JS 12-13 XJS 1-1 AquaTronic and Other Supervision Options 16 Overview of Electronic Supervision Features 17 Pump Options and Accessories 18-19 Performance range Hz Hz m 1 9 8 7 J, J 12 - J 1, JC 3, XJ 2 - XJ 11, XJC - XJC 11 J 2 - J 6 JS 12 - JS 1, XJS 2 - XJS 11 6 3 2 1 1 2 3 l/s 3 6 9 12 DlmsJXJ/SmsJXJSab Sulzer s complete range of submersible dewatering pumps provides reliable solutions for all major dewatering needs. 3
Submersible Drainage Pump J Submersible drainage pump J is suitable for pumping water and dirty water mixed with light abrasives. The low weight and compact design makes for convenient transport, handling and installation. 1 Easy start A built-in contactor connected to the thermal sensors in the stator windings protects the motor from overheating and features an automatic restart function. 2 Wear resistance An impeller in white cast iron with a full upper shroud and adjustable wear parts coated in nitrile rubber ensure high abrasion resistance. 3 Reliable operation A double mechanical shaft seal in an oil bath, with primary and secondary seal surfaces in silicon carbide, extends the life of the pump. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor. 1 Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. An adjustable diffuser ensures proper clearance throughout the impeller lifetime. By removing the top cover of the pump, the electrical junction area can easily be checked. 3 2
SUBMERSIBLE DRAINAGE PUMP J J W 1-PHASE Motor rating P2.8 kw, 1~ Voltage (V) 23 Full load (A) 2.9 269 rpm 6 mm Discharge connections Hose 2 Thread G/BSP 2 Weight (excl. cable) 9. kg 1 m m 12 1 8 6 2 W J-AA Hz 187 286 1 2 3 l/s 1 1m 3 /h SUBMERSIBLE DRAINAGE PUMP J 12 J 12 W/J 12 WKS* J 12 D/J 12 DKS** 1-PHASE 3-PHASE m17 1 J12-AD Hz Motor rating P2.9 kw, 1~ 1 kw, 3~ Voltage (V) 11 / 23 23 / / Full load (A) 1.9 /.2. / 2.3 / 1.9 27 rpm 28 rpm 6. x 22 mm Discharge connections Hose 1½, 2, 2½, 3 Thread G/BSP 2, 2½, 3 Weight (excl. cable) 16 kg 2 m D 1 W 8 l/s 1 2 3 m 3 /h Ø 22 23 D/W: 71 W (11V): 31 SUBMERSIBLE DRAINAGE PUMP J 1 J 1 W/J 1 WKS* J 1 D/J 1 DKS** 1-PHASE 3-PHASE Motor rating P2 1. kw, 1~ 1. kw, 3~ Voltage (V) 23 23 / / Full load (A) 8.1. / 2.9 / 2.3 28 rpm 28 rpm 6. x 22 mm Discharge connections Hose 1½, 2, 2½, 3 Thread G/BSP 2, 2½, 3 Weight (excl. cable) 18 kg (W), 16. kg (D) 2 m m 2 16 D 12 8 W 8 12 l/s 1 2 3 m 3 /h J1-W-AC/D-AC Hz Ø 22 23 W: 21 D: 71 * Built-in float switch available as option. ** KS version not available in V.
Submersible Drainage Pump XJ Submersible drainage pump XJ is excellent for pumping water and dirty water mixed with light abrasives. The slim design makes the pump easy to move and easy to handle. 1 Easy and fail-safe starting Instead of a built-in contactor, an optional AquaTronic unit can be used. The AquaTronic unit compensates for incorrect phase order, which ensures correct motor rotation every time. (Additional AquaTronic functions for electronic super vision are explained on pages 16-17.) 3 2 Wear resistance An impeller and wear ring in white cast iron, as well as diffusers coated in oil-resistant nitrile rubber, provide high abrasion resistance. 3 Reliable operation Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide and secondary seal surfaces in silicon carbide on carbon, extend the life of the pump. A double cable-entry seal system increases the protection against moisture entering the electrical junction area. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor. 1 Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. The adjustable wear ring ensures proper clearance throughout the impeller lifetime. External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. 6 2 3 Less energy and environmental impact The high-efficiency motor and new hydraulics combine with low-friction bearings to reduce power losses. The result is low total energy costs and minimized carbon footprint. 6 Flexibility Conversion between high-volume and high-head hydraulics is managed with only a few parts, ensuring the right performance for the application. SUBMERSIBLE DRAINAGE PUMP XJ 2 XJ 2 * XJ 2 HD* Motor rating P2 2. kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 8.8 /.1 /.3 / 2.9 / 2. 292 rpm 7. x 22 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 39 kg 2 m m 3 2 2 1 1 HD XJ2--AB/HD-AB Hz 372 699 6 1 1 2 2 l/s 2 6 8 m 3 /h Ø 27 332 373
SUBMERSIBLE DRAINAGE PUMP XJ XJ * XJ HD* Motor rating P2 3.7 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 13.2 / 7.6 / 6.1 /. / 3. 286 rpm 7. x 22 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 2 kg 2 m m 3 2 1 HD XJ--AC/HD-AB Hz 372 699 1 1 2 2 l/s 2 6 8 m 3 /h Ø 27 332 373 SUBMERSIBLE DRAINAGE PUMP XJ XJ * XJ LD* XJ HD* HIGH FLOW Motor rating P2.6 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 19.7 / 11.3 / 9.-1.8 / 6.6 /. 293 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 9 kg 2 m m 3 2 1 HD LD 1 2 3 6l/s 1 1 2 m 3 /h XJ--AD/LD-AA/HD-AC Hz max** 27 Ø 28 max** max** 66 76 SUBMERSIBLE DRAINAGE PUMP XJ 8 XJ 8 * XJ 8 LD* XJ 8 SD* HIGH FLOW Motor rating P2 8.3 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 27.8 / 16 / 13.8 / 9.3 / 6. 292 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 63 kg (/LD), 78 kg (SD) 2 m m 8 6 2 SD LD 1 2 3 6 l/s 1 1 2m 3 /h XJ8--AC/LD-AC/SD-AE Hz max** Ø 28 max** max** 66 /LD: 76 SD: 77 SUBMERSIBLE DRAINAGE PUMP XJ 11 XJ 11 * XJ 11 HD* Motor rating P2 11.8 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 37. / 21. / 17.2 / 12. / 8.6 292 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 81 kg 2 m m 6 3 2 1 HD XJ11--AA/HD-AA Hz max** 76 812 * Option: AquaTronic, built-in electronic pump control. ** Max measurement based on largest discharge size. 1 2 3 6l/s 1 1 2 m 3 /h Ø 28 max** max** 66 7
Submersible Drainage Pump J Submersible drainage pump J is suitable for pumping water and dirty water mixed with light abrasives. The pump design enables convenient transport, handling and installation. 1 Easy to start Pump J 2 has a built-in contactor connected to the thermal sensors in the stator windings, which protects the motor from overheating and features an automatic restart function. Pumps J and J 6 have thermal sensors in the stator windings that protect the motor from overheating by means of an external control panel. 1 2 Wear resistance Abrasive-resistant impellers, combined with diffusers and wear rings coated in oil-resistant nitrile rubber, provide extended pump life in tough applications. 3 Reliable operation Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide, extend the life of the pump. In pumps J 2 and J, the primary and secondary seals comprise an easy-to-replace seal cartridge. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor. 3 Serviceability External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. The adjustable wear ring ensures proper clearance throughout the impeller lifetime. Flexibility Conversion between high-volume and high-head hydraulics is managed with only a few parts, ensuring the right performance for the application. 2 8
SUBMERSIBLE DRAINAGE PUMP J 2 J 2 J 2 HD Motor rating P2 21 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 68 / 39 / 31.2 / 23 / 16 291 rpm 8 x 3 mm Discharge connections Hose, 6, 8 Thread G/BSP, 6, 8 Weight (excl. cable) 1 kg 2 m m 8 6 HD 2 2 6 8 1 l/s 9 18 27 36 m 3 /h J2-HD-AC/-AC Hz 7 97 SUBMERSIBLE DRAINAGE PUMP J J J HD Motor rating P2 3 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 18 / 62 / 1 / 36 / 2 293 rpm 8 x 3 mm Discharge connections Hose, 6, 8 Thread G/BSP, 6, 8 Weight (excl. cable) 27 kg Motor protection Thermal overload sensors 2 m m 1 8 6 2 HD 8 J--AE/HD-AC Hz 12 16 l/s 3 73 : 11 HD: 17 9 18 27 36 m 3 /h SUBMERSIBLE DRAINAGE PUMP J 6 J 6 J 6 HD Motor rating P2 6 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 18 / 16 / 8 / 61 / 2 1 rpm 12 x 6 mm Discharge connections Hose 6, 8, 1 Thread G/BSP 6, 8 Weight (excl. cable) 2 kg Motor protection Thermal overload sensors 2 m m 6 3 2 1 HD J6--AB/HD-AB Hz 116 1 2 3 l/s 3 6 9 12 m 3 /h 776 926 9
Submersible Drainage Center-Line Pumps JC and XJC Submersible drainage center-line pumps JC and XJC are excellent for pumping water and dirty water mixed with light abrasives. The slim design makes them easy to move and easy to handle, and they are perfect for applications with limited installation space. 1 Easy and fail-safe starting In XJC pump models, an optional AquaTronic unit can be used instead of a built-in contactor. The AquaTronic unit compensates for incorrect phase order, which ensures correct motor rotation every time. (Additional AquaTronic functions for electronic supervision are explained on pages 16-17.) In JC pump models, a built-in contactor with an automatic restart function protects the motor. 2 Wear resistance An impeller and wear ring in white cast iron, as well as diffusers coated in oil-resistant nitrile rubber, provide high abrasion resistance. 3 1 3 Reliable operation Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide and secondary seal surfaces in silicon carbide on carbon, extend the life of the pump. Pumps XJC - XJC 11 have a double cable-entry seal system that increases the protection against moisture entering the electrical junction area. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor. Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. The adjustable wear ring ensures proper clearance throughout the impeller lifetime. External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. 3 Less energy and environmental impact Pumps XJC - XJC 11 are equipped with high-efficiency motors and new hydraulics, which combine with low-friction bearings to reduce power losses. The result is low total energy costs and minimized carbon footprint. 2 6 6 Flexibility Pumps XJC - XJC 11 allow conversion between highvolume and high-head hydraulics with only a few parts, ensuring the right performance for the application. 1
SUBMERSIBLE DRAINAGE CENTER-LINE PUMP JC 3 JC 3 JC 3 HD Motor rating P2 3 kw, 3~ Voltage (V) 23 / / Full load (A) 12.7 / 7.3 /. 28 rpm 8 x 33 mm Discharge connections Hose 2, 3 Thread G/BSP 2, 3 Weight (excl. cable) 31 kg 2 m m 3 3 2 2 1 1 HD 1 1 2 l/s JC 3HD-AA/-AB Hz 728 2 6 m 3 /h 18 SUBMERSIBLE DRAINAGE CENTER-LINE PUMP XJC XJC * XJC LD* XJC HD* HIGH FLOW Motor rating P2.6 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 19.7 / 11.3 / 9.-1.8 / 6.6 /. 293 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 9 kg 2 m m 3 2 1 HD LD 1 2 3 6 l/s 1 1 2m 3 /h XJC--AD/LD-AA/HD-AC Hz 28 819 SUBMERSIBLE DRAINAGE CENTER-LINE PUMP XJC 8 XJC 8 * XJC 8 LD* XJC 8 SD* HIGH FLOW Motor rating P2 8.3 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 27.8 / 16 / 13.8 / 9.3 / 6. 292 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 63 kg (/LD), 78 kg (SD) 2 m m 8 6 2 SD LD 1 2 3 6 l/s 1 1 2 m 3 /h XJC8--AA/LD-AA/SD-AE Hz 28 /LD: 819 SD: 8 SUBMERSIBLE DRAINAGE CENTER-LINE PUMP XJC 11 XJC 11 * XJC 11 HD* Motor rating P2 11.8 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 37. / 21. / 17.2 / 12. / 8.6 292 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 8 kg 2 m m 6 3 2 1 HD 1 2 3 6l/s 1 1 2 m 3 /h XJC11--AA/HD-AA Hz Ø 28 88 * Option: AquaTronic, built-in electronic pump control. 11
Submersible Sludge Pump JS Submersible sludge pump JS is excellent for pumping dirty water and water mixed with solids. The pump has a slim design and low weight, which makes it easy to move and easy to handle. 1 Easy to start A built-in contactor connected to the thermal sensors in the stator windings protects the motor from overheating and features an automatic restart function. 2 Clog-free pumping A free-flow vortex impeller and pump volute make the pump ideal for pumping solids. The impeller is available in different sizes to meet specific requirements. 3 Reliable operation Both the impeller and volute are made from heavyduty ductile iron for maximum durability. Double mechanical shaft seals in an oil bath, with primary and secondary seal surfaces in silicon carbide, extend the life of the pump. Convenient handling The top cover and motor housing are made of lightweight aluminum, which creates a pump that is very easy to handle and install. 1 Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. 3 2 12
SUBMERSIBLE SLUDGE PUMP JS 12 JS 12 W/WKS* -1 JS 12 W/WKS* -11 JS 12 D/DKS* -1 JS 12 D/DKS* -11 1-PHASE 1-PHASE 3-PHASE 3-PHASE Motor rating P2.9 kw, 1~.9 kw, 3~ Voltage (V) 23 23 / / Full load (A).1 3.3 / 1.9 / 1. 28 rpm 28 rpm Free passage x mm Discharge connections Hose 2, 2½, 3 Thread G/BSP 2, 2½, 3 Weight (excl. cable) 18 kg 2 m m 1 1 1W 1 11W 2 6 8 1 l/s 1 2 3 11 JS 12-AA/W-AA Hz m 3 /h 22 278 8 SUBMERSIBLE SLUDGE PUMP JS 1 JS 1D/DKS* -11 JS 1D/DKS* -126 3-PHASE 3-PHASE m 1 JS 1-AA Hz Motor rating P2 1.3 kw, 3~ Voltage (V) 23 / / Full load (A). / 2.6 / 2.1 28 rpm Free passage x mm Discharge connections Hose 2, 2½, 3 Thread G/BSP 2, 2½, 3 Weight (excl. cable) 18 kg 2 m 1 2 126 11 6 8 1 l/s 22 278 8 1 2 3 m 3 /h * Built-in float switch available as option. KS version not available in V. 13
Submersible Sludge Pump XJS Submersible sludge pump XJS is excellent for pumping dirty water and water mixed with solids. The slim design makes the pump easy to move and easy to handle. 1 Easy and fail-safe starting Instead of a built-in contactor, an optional AquaTronic unit can be used. The AquaTronic unit compensates for incorrect phase order, which ensures correct motor rotation every time. (Additional AquaTronic functions for electronic supervision are explained on pages 16-17.) 3 2 Clog-free pumping A free-flow vortex impeller and pump volute make the pump ideal for pumping solids. The impeller is available in different sizes to meet specific requirements. 6 1 3 Reliable operation Both the impeller and volute are made from heavy-duty ductile iron for maximum durability. Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide and secondary seal surfaces in silicon carbide on carbon, extend the life of the pump. A double cable-entry seal system increases the protection against moisture entering the electrical junction area. Convenient handling The top cover and motor housing are made of lightweight aluminum, which creates a pump that is very easy to handle and install. Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. 3 2 6 Less energy and environmental impact The high-efficiency motor and hydraulics combine with low-friction bearings to reduce power losses. The result is low total energy costs and minimized carbon footprint. SUBMERSIBLE SLUDGE PUMP XJS 2 XJS 2 D* -128 XJS 2 D* -13 Motor rating P2 2. kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 8.8 /.1 /.3 / 2.9 / 2. 292 rpm Free passage x mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 39 kg 2 m m 2 16 12 13 8 128 8 12 16 2 l/s 1 2 3 6 7m 3 /h XJS2-AA Hz 136 Ø 27 32 37 7 1
SUBMERSIBLE SLUDGE PUMP XJS XJS D* -13 XJS D* -16 m 3 2 XJS-AA Hz Motor rating P2 3.7 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 13.2 / 7.6 / 6.1 /. / 3. 286 rpm Free passage x mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 1 kg 2 m 2 16 1 13 1 8 12 16 2 l/s 1 2 3 6 7m 3 /h 136 Ø 27 32 37 7 SUBMERSIBLE SLUDGE PUMP XJS XJS D* -16 XJS D* -17 m 3 2 XJS-AC Hz Motor rating P2.6 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 19.7 / 11.3 / 9. / 6.6 /. 293 rpm Free passage 8 x 6 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 9 kg 2 m 2 1 1 1 16 17 2 l/s 3 6 9 m 3 /h 169 Ø 28 393 38 789 SUBMERSIBLE SLUDGE PUMP XJS 8 XJS 8 D* -17 XJS 8 D* -19 m 3 3 XJS8-AD Hz Motor rating P2 8.3 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 27.8 / 16 / 12.8 / 9.3 / 6. 292 rpm Free passage 8 x 6 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 6 kg 2 m 2 2 19 1 17 1 1 2 3 l/s 3 6 9 m 3 /h 169 Ø 28 393 38 789 SUBMERSIBLE SLUDGE PUMP XJS 11 XJS 11 D* -17 XJS 11 D* -19 Motor rating P2 11.8 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 37. / 21. / 17.2 / 12. / 8.6 292 rpm Free passage 8 x 6 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 8 kg 2 m m 3 3 19 2 2 17 1 1 1 2 3 l/s 3 6 9 m³/h XJS11-AA Hz 169 Ø 28 393 38 89 * Option: AquaTronic, built-in electronic pump control. 1
AquaTronic and Other Supervision Options Submersible dewatering pumps XJ, XJC and XJS have several options for electronic supervision that make them even more reliable and easy to use. Most important is the AquaTronic unit, which ensures correct motor rotation every time. AquaTronic The AquaTronic unit replaces the built-in contactor in the basic pump configurations and ensures that the motor always rotates correctly, no matter how the phases are connected. Key benefits of the AquaTronic unit include: Correction of motor rotation if phases are improperly connected Run mode Integrated start equipment (direct or soft start depending on pump model) Motor protection against high temperature, high amperage and missing phase If the pump is also equipped with an optional Level sensor, AquaTronic provides: Precise level control Protection against dry running AquaTronic Service Diagnostic Program Connecting a PC to the AquaTronic unit via USB cable provides access to the Service Diagnostic Program, which offers: Pump status data (temp, voltage, moisture, etc.) Pump operating history Pump failure history Pump service and maintenance history Digital manual and spare parts documentation AquaPlug and AquaTronic Control Panel AquaPlug and AquaTronic Control Panel are options that combine with AquaTronic to provide additional alarm and start/stop functions, as well as indications for important parameters. AquaPlug is incorporated into the power line via 16A or 32A sockets. Service Diagnostic Program via USB contact AquaTronic Level sensor AquaPlug or AquaTronic Control Panel 16
Overview of Electronic Supervision Features The table below shows the range of features available when the AquaTronic unit and other electronic supervision options are used with the submersible dewatering pumps XJ, XJC and XJS. Electronic supervision feature Basic pump configuration with contactor Pump with AquaTronic Pump with AquaTronic + Level Sensor Pump with AquaTronic + AquaPlug/ AquaTronic Control Panel Pump with AquaTronic + AquaPlug/ AquaTronic Control Panel + Level Sensor Run mode Integrated start equipment Automatic correction of rotation Motor protection high temp Motor protection high amp Protection against missing phase Level control Protection against dry running Automatic restart Stop mode E-mode (automatic stop/run) Indication of water in oil Indication of low motor insulation Indication of high/ low voltage Indication of high temp Indication of high amp Indication of phase imbalance USB cable connection = Fault indication when pump is automatically stopped to protect the motor 17
Pump Options and Accessories AQUATRONIC UNIT FOR CORRECT MOTOR ROTATION Our built-in AquaTronic unit integrates electronic intelligence into the pump, ensuring correct motor rotation by automatically adjusting for incorrect phase order. It also protects the motor by stopping the pump in the event of over-amperage, overheating, low or high voltage or missing phase. Another feature of the AquaTronic unit is the internal software that allows pump performance and service diagnostics data to be viewed on a PC via USB link, enabling accurate evaluation of service and maintenance needs. The workshop manual and spare parts list, readily available in the AquaTronic unit, can be viewed via the link as well. The AquaTronic unit must be ordered when ordering the pump. Retrofitting is not possible. AQUAPLUG A AQUATRONIC CONTROL PANEL AquaPlug and AquaTronic Control Panel are options that combine with AquaTronic to provide additional alarm and start/stop functions, as well as indications for important parameters. AquaPlug is incorporated into the power line via 16A or 32A sockets. LEVEL SENSOR FOR PRECISE A COST EFFECTIVE WATER LEVEL CONTROL Together with AquaTronic, the level sensor provides precise and cost-effective water level control, and helps lower power consumption. SOFTDRIVE FOR COST EFFECTIVE OPERATION Sulzer offers a built-in SoftDrive concept on the J 2 pumps. It reduces starting current dramatically and provides smooth operation for both the power net and pump equipment. The pump can be started with a smaller-sized generator compared to a standard pump started directly on-line. QUICK A EASY INSTALLATION WITH FLOATATION RING Sulzer offers a solution for pumps up to kg. The ring is easy to install and can be used with dewatering pumps J 12-1, XJ 2-. FLOATATION SYSTEM TO PREVENT UNNECESSARY WEAR A modular flotation system is available, covering pumps from 9 to 6 kg. The modular floatation system is easy to build and used with dewatering pumps XJ -11, XJS -11, J 2-6. 18
PROTECTIVE BELTS FOR MORE DURABLE OPERATION Sulzer submersible dewatering pumps can easily be fitted with zinc anode belts providing protection against galvanic corrosion. The cast parts of the pump can also be protectively coated, ensuring trouble-free operation when pumping salty or brackish water. POLYURETHANE FOR PROLONGED DRAINAGE PUMP LIFE Sulzer offers wear rings in polyurethane, which increases resistance when pumping fine sand and other abrasive mediums. Polyurethane-coated wear rings are available as an option on J 2-6. SERIES CONNECTIONS FOR PUMPING S With minimal effort, the standard Sulzer drainage pumps can be rebuilt to function in series for high head applications. BOTTOM SUCTION ADAPTER FOR TOTAL WATER REMOVAL On pumps J 12-1 and J 2, the standard bottom plate may be replaced by a bottom suction adapter. A basement floor or a tank can be pumped practically dry with this adapter. REPAIR KITS THAT SAVE TIME A MONEY Sulzer offers repair kits for all submersible dewatering pumps. The repair kits include common parts required for a typical repair. Our modular pump design makes it possible to repair all drainage and sludge pumps with just a few repair kits. 19
www.sulzer.com E1361 en 2.216 (3,), Copyright Sulzer Ltd 216 This brochure is a general product presentation. It does not provide a warranty or guarantee of any kind. Please, contact us for a description of the warranties and guarantees offered with our products. Directions for use and safety will be given separately. All information herein is subject to change without notice.