www.qualitycuttingtools.com.au Item Page No Core Drills 2-7 Core Drill Accessories 2 Bi Metal Holesaws 8 Machined Countersinks 9 TCT Holesaws 10-12 TCT Holesaw Accessories 13 XE Step Drills and Conical Drills 14 & 15 HSS Step Drills 16 HSS Countersinks 17 Counterbores 18 Bevelling Machine 19 Powerbor Magnetic Drilling Machines 21-24 Carbide Burrs 25-55 Valid from 1st March 2010 Note: For Special Orders a 50% deposit is required with no returns Quality Cutting Tools reserves the right to correct, modify, and change, without prior notice, products and pricing in this catalogue Quality Cutting Tools - March 2010 Pg: 1
Karnasch Core Drills Optimal Good lll ll Steel Stainless Steel Aluminium < 10% Si Grey Cast Iron Bisalloy 360 Bisalloy 500 Railtracks Possible l Gold Line Core Drills Gold-Tech surface treated core drills for a longer tool life are our minium standard level. These core drills are already high-tech without any compromises. lll ll ll Blue Line Core Drills Blue Line coated core drills are our standard quality level. For more liftime and for use with difficult materials. lll ll lll lll ll lll Blue Line Pro Core Drills Blue Line Pro core drills are our supreme quality level. When you need the longest possible lifetime without any compromises. lll lll lll lll lll ll lll Hard Line Core Drills Almost all Karnasch TCT Core Drills come with a sophisticated 3-cut geometry which results in increased tool life, smooth cutting action and excellent cutting capacity. Hard Line Core Drills are exclusively equipped with Sandvik carbide teeth. lll lll lll lll lll lll lll Mini Line Core Drills Silver core drills are specially designed for our Mini Line range. ll l All Karnasch Core Drills are fitted with a universal shank fitting all machines with a Weldon Shank such as: Alfa, BDS, Bux, Ruko, Magnetor, Euroboot, Rotabroach etc, and Alfra Quick-Change shank system. Standard on all Karnasch Core Dills is Step Hardening for tougher drilling with more flexibility. Core Drills for Fein Magnetic Base Drills only, can be supplied as a special order. Phone for more details. Pg: 2 Quality Cutting Tools - March 2010
201230 Mini Line Core Drill Diameter 201230 Diameter 201230 8 $32.00 18 $37.00 10 $32.00 20 $38.00 12 $33.00 22 $40.00 13 $33.00 24 $43.00 14 $34.00 25 $43.00 16 $35.00 Order codes: Core Drills eg: for 14mm 201230014 Ejector Pin 201232 $9.50 Centre Drill 201231 $36.90 Universal 19mm (3/4 ) adapter + suitable ejector pin for application on all core drilling machines with Weldon 19mm (3/4 ) holder. 201234 $34.40 Holder for Ejector Pin 201232 Holder for Drill 201231 201235 $103.00 201236 $103.00 201251 $549.00 8,10, 12, 13, 14, 16, 18, 20, 22, 24, 25mm + 201232, 201233, 201234, 201235, 201238 (punch), 201239 (allen key) 201233 $11.00 To suit above Adaptor 201234 Accessories No Internal Cooling Internal Cooling Exchange using 2 Grub Screws Quick Change Exchange using 2 Grub Screws Quick Change Part No Morse Taper Shank List Price 201283 2 Weldon 19mm $220.00 201293 3 Weldon 19mm $260.00 201286 3 Weldon 32mm $280.00 201301 2 Weldon 19mm $230.00 201437 3 Weldon 19mm $270.00 201287 2 Weldon 19mm $298.00 201289 3 Weldon 19mm $330.00 201290 3 Weldon 32mm $340.00 201292 4 Weldon 32mm $360.00 201303 2 Weldon 19mm $325.00 201307 3 Weldon 19mm $345.00 201291 $390.00 Morse Taper 3 Weldon 19mm Extra long tool holder with automatic coolant supply especially for all extra long core crills like the series: Gold Line 80 + 110mm, Blue Line 80 + 110mm, Hard- Line 80 + 110mm with universal shank 19mm (3/4 ). With this tool holder you don t need to change the twopiece ejector pins. You can drill as deep as 110mm in one working process. A range of extensions and adaptors are also available in stock. Please phone for more information. Quality Cutting Tools - March 2010 Pg: 3
GOLD LINE BLUE LINE BLUE LINE Pro Cut Depth 30mm 55mm 80mm 110mm Diameter 201260u 201270u 201285u 201280u 12 $50.00 $62.80 13 $50.00 $62.80 13.5 SPO $50.00 $62.80 14 $51.00 $64.70 15 $51.00 $64.70 15.5 SPO $51.00 $64.70 16 $52.90 $66.50 17 $52.90 $66.50 17.5 $52.90 $66.50 18 $55.50 $69.20 $105.70 $134.40 19 $55.50 $69.20 $105.70 $143.90 19.5 SPO $55.50 $69.20 20 $58.30 $72.20 $110.00 $150.00 21 $58.30 $72.20 $110.00 $160.30 22 $69.20 $82.10 $125.20 $164.40 23 $69.20 $82.10 $125.20 $166.80 24 $71.80 $86.70 $132.40 $172.60 25 $71.80 $86.70 $132.40 $176.70 26 $76.10 $91.50 $137.10 $193.10 26.5 SPO $76.10 $91.50 27 $76.10 $91.50 $137.10 $197.20 28 $82.10 $99.70 $149.30 $201.40 29 $82.10 $99.80 $149.30 $205.50 30 $85.90 $104.80 $156.90 $213.70 31 $88.80 $104.80 32 $91.90 $115.20 $167.80 $238.40 33 $91.90 $115.20 $167.80 $242.50 34 $95.10 $120.80 35 $95.10 $120.80 $175.80 $254.80 36 $107.50 $136.10 $198.90 $269.20 37 $107.50 $136.10 38 $115.20 $144.00 $211.20 $288.60 39 $118.00 $144.00 40 $126.30 $156.90 $231.00 $320.50 41 $131.20 $163.00 42 $141.50 $177.00 43 $141.50 $177.00 44 $155.90 $193.50 45 $155.90 $193.50 $274.40 $378.00 46 $167.10 $208.30 47 $167.10 $208.30 48 $177.00 $220.70 49 $177.00 $220.70 50 $188.90 $245.40 $351.60 $460.00 51 $188.90 $249.60 52 $201.70 $255.30 53 $208.27 $263.60 54 $213.70 $271.80 55 $218.60 $280.10 56 $226.90 $290.60 57 $234.70 $296.20 58 $241.30 $303.20 59 $247.10 $311.40 60 $255.30 $321.30 Pg: 4 Quality Cutting Tools - March 2010 19mm / 3/4 Shank Cut Depth 30mm 55mm 80mm 110mm Diameter 201312 201313 201285 201280 12 $68.20 $84.30 13 $68.20 $84.30 14 $69.90 $86.10 15 $69.90 $86.10 16 $71.80 $87.90 17 $71.80 $87.90 18 $73.60 $89.70 $121.20 $162.40 19 $73.60 $89.70 $121.20 $174.70 20 $77.10 $93.30 $125.40 $176.70 21 $78.90 $95.10 $128.50 $191.10 22 $89.30 $105.80 $143.20 $193.20 23 $90.00 $105.80 $145.90 $197.30 24 $92.50 $109.40 $152.90 $201.40 25 $92.50 $109.40 $152.90 $205.50 26 $96.70 $111.50 $157.20 $219.80 27 $96.70 $111.50 $157.20 $223.90 28 $102.20 $119.30 $169.00 $230.10 29 $102.20 $119.30 $169.00 $234.30 30 $106.10 $124.20 $176.30 $242.50 31 $112.50 $134.20 32 $114.10 $142.10 $187.00 $267.10 33 $114.10 $142.10 $187.00 $273.30 34 $118.00 $146.00 35 $118.00 $146.00 $194.60 $283.50 36 $130.20 $157.80 $216.80 $300.00 37 $161.80 $193.40 38 $169.70 $201.20 $255.20 $355.40 39 $169.70 $201.20 40 $181.50 $213.10 $274.40 $423.20 41 $189.80 $222.80 42 $202.10 $237.20 43 $202.10 $237.20 44 $214.10 $253.70 45 $214.10 $253.70 $316.20 $438.60 46 $226.50 $268.10 47 $226.50 $268.10 48 $234.70 $280.50 49 $234.70 $280.50 50 $249.60 $305.20 $390.50 $520.300 51 $249.60 $309.40 52 $259.90 $315.60 53 $268.10 $323.80 54 $271.80 $332.80 55 $278.40 $340.30 56 $286.70 $348.50 57 $294.90 $354.70 58 $301.10 $363.00 59 $305.20 $369.20 60 $313.50 $379.50 Ejector Pins Part No. Price To Suit Dimensions 201261 $27.70 201260u, 201312, 201284 6.34x77mm 201271 $29.60 201270u, 201313, 201317, 201316 6.34x102mm 201439 $41.50 201285u, 201285 7.98x130mm 201399 $53.80 201280u, 201280 7.98x160mm 201273 $50.30 201316 (x18-60mm) 7.98x105mm 201272 $32.30 201316 (x61-150mm) 7.98x118mm 201408 $57.50 201660 7.98x167mm 19mm / 3/4 Shank Cut Depth 30mm 55mm Diameter 201284 201317 12 $126.10 $159.90 13 $126.10 $159.90 14 $136.30 $159.90 15 $137.10 $172.20 16 $137.10 $172.20 17 $137.10 $172.20 18 $137.10 $172.20 19 $137.10 $172.20 20 $145.30 $182.90 21 $147.40 $193.70 22 $156.10 $197.30 23 $163.20 $204.50 24 $176.00 $218.80 25 $176.00 $218.80 26 $197.90 $235.70 27 $198.00 $245.40 28 $218.20 $275.30 29 $221.80 $279.50 30 $227.20 $283.50 31 $233.10 $290.50 32 $242.80 $303.70 33 $257.10 $322.50 34 $257.10 $322.50 35 $266.80 $336.70 36 $292.50 $369.90 Application: Insert piece 1 into the core drill shank. Push piece 2 onto part 1. Drill as deep as 50mm cutting depth. Then remove piece 2 and continue cutting 201427 $64.50 To suit 201285u, 201285 Core Drill 201428 $72.30 To suit 201280u, 201280 Core Drill 19mm / 3/4 Shank
HARD LINE Tungsten-Carbide Tipped Cut Depth 55mm 110mm Diameter 201316 201660 12 $146.50 13 $146.50 14 $146.50 15 $146.50 16 $146.50 17 $146.50 18 $146.50 $213.60 19 $146.50 $213.60 20 $146.50 $213.60 21 $149.30 $213.60 22 $149.30 $213.60 23 $149.30 $213.60 24 $149.30 $213.60 25 $149.30 $213.60 26 $160.30 $232.80 27 $160.30 $232.80 28 $160.30 $232.80 29 $160.30 $232.80 30 $160.30 $232.80 31 $187.90 32 $187.90 $280.30 33 $187.90 $280.30 34 $187.90 35 $187.90 $280.30 36 $215.50 $321.10 37 $215.50 38 $215.50 $321.10 39 $215.50 40 $215.50 $337.90 41 $259.70 42 $259.70 43 $259.70 44 $259.70 45 $259.70 $387.50 46 $276.30 47 $276.30 48 $276.30 49 $276.30 50 $292.80 $441.50 51 $314.90 52 $320.50 53 $331.40 54 $342.50 55 $348.10 $522.10 56 $359.10 57 $370.20 $554.50 58 $375.70 59 $381.10 60 $386.70 $584.40 61 $403.20 62 $414.30 63 $431.00 64 $441.90 $667.20 65 $458.50 $688.70 66 $475.10 67 $486.10 $732.20 68 $497.20 69 $502.60 70 $519.30 $779.50 75 $552.30 $830.70 80 $591.10 $888.50 85 $662.80 $995.50 90 $767.80 $1152.90 95 $878.30 $1318.80 100 $977.70 $1477.20 105 $1,137.80 110 $1,259.30 115 $1,413.90 120 $1,574.10 125 $1,750.90 130 $1,927.60 135 $2,098.80 140 $2,286.50 145 $2,468.80 150 $2,662.10 19mm / 3/4 Shank 32mm Shank GOLD LINE Imperial Cut Depth 30mm 55mm 80mm Diameter mm 201610u Price 201620u Price 201625u Price 7/16 11.10 201610u005 $50.00 201620u005 $62.80 1/2 12.70 201610u010 $50.00 201620u010 $62.80 9/16 14.28 201610u015 $51.00 201620u015 $64.70 5/8 15.87 201610u020 $52.90 201620u020 $66.70 11/16 17.65 201610u025 $54.60 201620u025 $68.40 201625u025 $105.70 3/4 19.04 201610u030 $55.50 201620u030 $69.40 201625u030 $105.70 13/16 20.63 201610u035 $58.50 201620u035 $72.20 201625u035 $110.00 7/8 22.22 201610u040 $69.40 201620u040 $82.10 201625u040 $125.20 15/16 23.81 201610u045 $71.90 201620u045 $86.80 201625u045 $132.40 1 25.40 201610u050 $71.90 201620u050 $86.80 201625u050 $137.10 1-1/16 26.98 201610u055 $76.20 201620u055 $91.60 201625u055 $137.10 1-1/8 28.57 201610u060 $82.10 201620u060 $99.80 201625u060 $149.30 1-3/16 30.13 201610u065 $86.10 201620u065 $104.80 201625u065 $156.90 1-1/4 31.75 201610u070 $91.90 201620u070 $115.20 201625u070 $167.80 1-5/16 33.33 201610u075 $91.90 201620u075 $115.20 201625u075 $167.80 1-3/8 34.92 201610u080 $95.10 201620u080 $120.80 201625u080 $175.80 1-7/16 36.51 201610u085 $107.50 201620u085 $136.10 201625u085 $198.90 1-1/2 38.10 201610u090 $115.20 201620u090 $144.00 201625u090 $211.20 1-9/16 39.68 201610u095 $126.40 201620u095 $157.10 201625u095 $231.00 1-5/8 41.27 201610u100 $131.20 201620u100 $163.00 201625u100 $231.00 1-11/16 42.86 201610u105 $141.50 201620u105 $177.00 201625u105 $254.50 1-3/4 44.45 201610u110 $155.90 201620u110 $193.50 201625u110 $274.40 1-13/16 46.03 201610u115 $167.10 201620u115 $208.30 201625u115 $292.80 1-7/8 47.62 201610u120 $177.00 201620u120 $220.70 201625u120 $312.90 1-5/16 49.21 201610u125 $177.00 201620u125 $220.70 201625u125 $329.50 2 50.80 201610u130 $188.90 201620u130 $249.60 201625u130 $351.50 2-1/16 52.38 201610u135 $201.70 201620u135 $255.30 201625u135 $358.50 Special Order Only Item HARD LINE Imperial Tungsten-Carbide Tipped Cut Depth 40mm 55mm 80mm Diameter mm 201630 Price 201640 Price 201670 Price 1/2 12.70 201630010 $85.90 201640010 $146.50 9/16 14.28 201630015 $91.00 201640015 $146.50 5/8 15.87 201630020 $91.00 201640020 $146.50 11/16 17.65 201630025 $91.00 201640025 $146.50 201670025 $178.90 3/4 19.04 201630030 $132.60 201640030 $146.50 201670030 $178.90 13/16 20.63 201630035 $132.60 201640035 $149.30 201670035 $178.90 7/8 22.22 201630040 $138.20 201640040 $149.30 201670040 $178.90 15/16 23.81 201630045 $138.20 201640045 $149.30 201670045 $178.90 1 25.40 201630050 $138.20 201640050 $149.30 201670050 $178.90 1-1/16 26.98 201630055 $143.70 201640055 $160.30 201670055 $195.00 1-1/8 28.57 201630060 $143.70 201640060 $160.30 201670060 $195.00 1-3/16 30.13 201630065 $143.70 201640065 $160.30 201670065 $195.00 1-1/4 31.75 201630070 $171.30 201640070 $187.90 201670070 $235.60 1-5/16 33.33 201630075 $171.30 201640075 $187.90 201670075 $235.60 1-3/8 34.92 201630080 $171.30 201640080 $187.90 201670080 $235.60 1-7/16 36.51 201630085 $193.40 201640085 $215.50 201670085 $268.80 1-1/2 38.10 201630090 $193.40 201640090 $215.50 201670090 $268.80 1-9/16 39.68 201630095 $193.40 201640095 $215.50 201670095 $277.50 1-5/8 41.27 201630100 $232.00 201640100 $259.70 201670100 $301.60 1-11/16 42.86 201630105 $232.00 201640105 $259.70 201670105 $317.50 1-3/4 44.45 201630110 $232.00 201640110 $259.70 201670110 $324.80 1-13/16 46.03 201630115 $248.70 201640115 $276.30 201670115 $355.00 1-7/8 47.62 201630120 $248.70 201640120 $276.30 201670120 $355.00 1-5/16 49.21 201630125 $248.70 201640125 $276.60 201670125 $355.00 2 50.80 201630130 $270.80 201640130 $292.80 201670130 $386.90 2-1/16 52.38 201630135 $284.50 201640135 $320.50 201670135 $396.00 Special Order Only Item Quality Cutting Tools - March 2010 Pg: 5
6 Piece Kit 25 Piece Kit Contains: Diameters 14, 16, 18, 20, 22, 26mm or 9/16, 5/8, 3/4, 16/16, 15/16, 1-1/16 + 4 suitable ejector pins Contains: Diameters 12-36mm or 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 1-5/16 + 4 suitable ejector pins 39 Piece Kit Contains: Diameters 12-50mm + 4 suitable ejector pins Imperial Kits are special order only items Type Cutting Depth Pieces Part No. Price 6 201322 $422.50 30mm 25 201341 $1 748.40 Gold 39 201361 $3 862.40 6 201332 $509.10 55mm 25 201349 $2 173.30 39 201365 $4 757.00 6 201325 $540.50 30mm 25 201342 $2 261.90 Blue 39 201360 $5 057.80 6 201328 $627.60 55mm 25 201345 $2 738.20 39 201363 $5 952.20 Blue Line Pro 30mm 6 201331 $970.20 25 201348 $4 542.10 55mm 6 201334 $1 185.90 25 201347 $5 314.00 6 201339 $712.10 Hard Line 55mm 25 201354 $2 936.00 39 201369 $5 509.00 201138-6 Piece $66.60 Empty Core Drill Kit 201139-25 & 39 Piece $224.00 Empty Core Drill Kit Pg: 6 Quality Cutting Tools - March 2010
Recommended speed - Core Drills Gold Line, Blue Line, Blue Line Pro - 201312,201313, 201260u, 201270u, 201284, 201317, 201280, 201280u Material Mild Steel Stainless Steel Cast Iron Bisalloy 360 Bisalloy 400 Aluminium Diam mm rpm rpm rpm rpm rpm rpm 12 796 531 265 425 372 796 13 735 490 245 392 343 735 14 682 455 227 364 318 682 15 637 425 212 340 297 637 16 597 398 199 318 278 597 17 562 375 187 300 262 562 18 531 354 177 283 248 531 19 503 335 168 268 235 503 20 478 318 159 254 222 478 21 455 303 152 242 212 455 22 434 290 145 232 203 434 23 415 277 138 221 194 415 24 398 265 133 212 185 398 25 382 255 127 204 179 382 26 367 245 122 196 171 367 27 354 236 118 188 165 354 28 341 227 114 181 159 341 29 329 220 110 176 154 329 30 318 212 106 170 148 318 31 308 205 103 164 144 308 32 299 199 100 159 139 299 33 290 193 97 154 135 290 34 281 187 94 150 131 281 35 273 182 91 146 127 273 36 265 177 88 141 124 265 37 258 172 86 138 120 258 38 251 168 84 134 118 251 39 245 163 82 130 114 245 40 239 159 80 127 111 239 41 233 155 78 124 108 233 42 227 152 746 121 106 227 43 222 148 74 118 104 222 44 217 145 72 116 101 217 45 212 142 71 114 99 212 46 208 138 69 110 96 208 47 203 136 68 109 95 203 48 199 133 66 106 93 199 49 195 130 65 104 91 195 50 191 127 64 101 89 191 60 159 106 70 85 74 159 70 136 91 58 73 63 136 80 115 81 48 65 56 115 90 104 72 42 58 50 104 100 95 62 37 50 43 95 Recommended speed for T.C.T. Core Drills Items: 201316 Material Mild Steel Stainless Steel Cast Iron Bisalloy 360 Bisalloy 400 Aluminium Diam mm rpm rpm rpm rpm rpm rpm 12 1475 929 1200 743 650 1592 13 1300 857 1090 685 600 1470 14 1210 796 910 637 557 1365 15 1160 743 850 594 520 1274 16 1050 697 796 558 488 1194 17 955 656 749 525 459 1124 18 885 619 708 495 433 1062 19 838 587 670 469 410 1006 20 796 557 637 446 389 955 21 758 531 607 425 371 910 22 724 507 579 406 355 869 23 692 485 554 388 339 831 24 663 464 531 371 325 796 25 637 446 510 357 312 764 26 612 429 490 343 300 735 27 590 413 472 330 289 708 28 569 398 455 318 279 682 29 549 384 439 307 269 659 30 531 372 425 297 260 637 31 514 360 411 288 252 616 32 498 348 398 278 243 597 33 483 338 386 270 236 579 34 468 328 375 262 229 562 35 455 318 364 254 222 546 36 442 310 354 248 217 531 37 430 301 344 240 210 514 38 419 293 335 234 205 503 39 408 286 327 228 200 490 40 398 279 318 223 195 478 41 388 272 311 217 190 466 42 379 265 303 212 185 455 43 370 259 296 207 181 444 44 362 253 290 202 177 434 45 354 248 283 198 173 425 46 346 242 277 193 169 415 47 339 237 271 189 166 407 48 332 232 265 185 162 398 49 325 227 260 181 158 390 50 318 223 255 178 156 382 60 265 186 212 148 130 318 70 227 159 182 127 111 273 80 199 139 159 111 97 239 90 177 124 142 99 86 212 100 159 111 127 89 77 191 Quality Cutting Tools - March 2010 Pg: 7
Bi-Metal Hole Saw Solid 201500 Super Quality HSS 8% Cobalt Steel Applications: TPI Karnasch bimetal hole saws are shipped in heavy version with solid base plate. Reinforcement plates are no longer necessary. We only ship high-alloyed HSS Co8 quality with variable tooth pitch for the maximum possible cutting ability and durability. Order codes: Bi-Metal Hole Saws eg: for 40mm 201500040 Diam mm Inch Price Diam mm Inch Price Diam mm Inch Price 14 9/16 $15.30 44 1-3/4 $23.70 92 3-5/8 $44.60 16 5/8 $15.30 46 1-13/16 $24.20 95 3-3/4 $45.70 17 11/16 $15.30 48 1-7/8 $25.20 98 3-7/8 $46.90 19 3/4 $15.30 51 2 $26.00 102 4 $49.60 20 25/32 $15.30 52 2-1/16 $26.60 105 4-1/8 $52.50 21 13/16 $15.50 54 2-1/8 $27.90 108 4-1/4 $55.80 22 7/8 $15.50 57 2-1/4 $27.90 111 4-3/8 $57.90 24 15/16 $16.30 59 2-5/16 $29.70 114 4-1/2 $59.10 25 1 $16.30 60 2-3/8 $30.30 121 4-3/4 $63.00 27 1-1/16 $17.10 64 2-1/2 $31.00 127 5 $69.40 29 1-1/8 $17.70 65 2-9/16 $31.80 133 - $74.80 30 1-3/16 $18.20 67 2-5/8 $33.30 140 5-1/2 $80.00 32 1-1/4 $19.00 68 2-11/16 $34.10 146 5-3/4 $85.00 33 1-5/16 $20.00 70 2-3/4 $34.90 152 6 $92.60 35 1-3/8 $20.80 73 2-7/8 $35.50 160 6 1/3 $107.50 37 1-7/16 $22.70 76 3 $36.80 168 6 5/8 $112.80 38 1-1/2 $21.70 79 3-1/8 $38.00 177 7 5/8 $122.70 40 1-9/16 $22.50 83 3-1/4 $39.20 200 7 14/16 $132.00 41 1-5/8 $22.90 86 3-3/8 $40.30 210 8 1/4 $143.00 43 1-11/16 $23.70 89 3-1/2 $42.10 Shank x9mm for hole saws:x14-30mm 201507 $21.20 HSS spare pilot pin suitable for all shanks 201505 $9.50 Spare Ejector Pin 201506 $4.90 300mm Extension for Article 201503 201508 $22.10 Part No Description Price 201503 Shank x11mm for hole saws:x32-152mm $38.60 201511 SDS-PLUS shank for hole saws:x32-52mm $52.10 201510 SDS-PLUS shank for hole saws:x14-30mm $38.40 201521 Shank x12.7mm for hole saws:x32-210mm $40.75 201513 $131.10 General Purpose hole saw kit Standard (6 hole saws) Contains: x19, 22, 35, 68, 70, 76mm Including Shanks: 201507 & 201503 201504 $157.80 General Purpose hole saw kit Standard (9 hole saws) Contains: x16, 19, 22, 29, 35, 44, 52, 57, 67mm Including Shanks: 201507 & 201503 201519 $201.40 General Purpose hole saw kit Professional (12 hole saws) 201520 $306.70 General Purpose hole saw kit Royal (19 hole saws) Contains: x16, 19, 20, 22, 24, 25, 27, 29, 30, 32, 35, 38, 40, 44, 51, 57, 60, 68, 76mm Including Shanks: 201507 & 201503 Counter Displays and Wall Displays Available. Price on Application Contact us to discuss your requirements Pg: 8 Quality Cutting Tools - March 2010 Contains: x16, 19, 22, 25, 29, 32, 35, 38, 44, 51, 64, 76mm Including Shanks: 201507 & 201503
Operating Suggestion Bi Metal Holesaw Approved eye protection and gloves must be worn while using these tools. Sawing Speeds: Due to the varying dimensions and types of materials, speeds are subject to change. See table below for suggested speeds. Lubrication: For longer saw life and cleaner cutting, use a good grade of cutting oil for mild steel, tool or stainless steel, copper, brass, bronze and aluminium. For cast iron used compressed air. Recommendation for use: Clear chips frequently to prevent them clogging in saw teeth, slowing cut and overheating blade. Suggested Speeds x mm x inch Mild Steel Tools/Stainless Bronze, Copper, Cast Iron Steel Brass Aluminium Wood 14-17 9/16-11/16 580-500 300-250 400-330 790-665 900-750 800-720 19-21 3/4-13/16 460-425 230-210 300-280 600-560 690-630 680-600 22-25 7/8-1 390-350 195-175 260-235 520-470 585-525 560-500 27-30 1.1/16-1.3/16 325-285 160-145 215-190 435-480 480-425 500-430 32-35 1.1/4-1.3/8 275-250 140-125 180-165 360-330 410-375 410-370 37-40 1.7/16-1.9/16 240-220 120-110 160-145 315-290 360-330 350-310 41-44 1.5/8-1.3/4 210-195 105-95 140-130 280-260 315-295 290-250 46-51 1.13/16-2 190-170 95-85 125-115 250-230 285-255 230-200 52-56 2.1/16-2.3/16 165-155 80-75 110-100 220-205 245-230 200-190 57-60 2.1/4-2.3/8 150-140 75-70 100-95 200-190 225-220 185-180 64-67 2.1/2-2.5/8 135-130 68-65 90-85 180-170 205-195 180-170 68-73 2.11/16-2.7/8 130-120 65-60 85-80 165-160 190-180 165-155 76-83 3-3.1/4 115-105 55-50 75-70 150-140 170-155 150-140 86-92 3.3/8-3.5/8 100-95 50-45 65-60 130-120 150-140 135-125 95-102 3.3/4-4 90-85 45-40 60-55 120-110 135-130 120-100 105-111 4.1/8-4.3/8 80-75 40-35 55-50 110-100 120-110 100-90 114-127 4.1/2-5 75-65 35-30 50-40 100-85 105-90 90-85 133-152 5.1/4-6 65-55 30-25 40-35 80-75 90-85 80-75 Countersinks 201295025 $91.50 Countersinks with 3 cutting edges in HSS-XE steel quality with universal shank 19mm - 3/4, 90 g 201295030 $105.90 Special Steel/Stainless, Bisalloy Unalloyed Steel Aluminium 201295040 $150.70 201295055 $240.30 Non-Ferrus Metals Plastics, Laminates Quality Cutting Tools - March 2010 Pg: 9
Power Max 10-201010 Special Steel/Stainless Unalloyed Steel Aluminium Non-Ferrus Metals Plastics Sandwich Materials 201010a Order codes: Power Max10 Holesaw eg: for 20mm Complete 201010020 eg: for 20mm cutter only 201010a020 Pg: 10 Quality Cutting Tools - March 2010 Power-Max hole saws with Easy-Change quickchange shank system for almost unlimited use on hand drills, core drilling machines, drill presses, radial drill, turning centre, etc. Diameter 201010 Diameter 201010 Diameter 201010 Diameter 201010 Easy Cut 14 $61.70 29 $62.00 45 $87.20 63 $124.00 14.5 $61.70 30 $62.00 46 $94.90 64 $124.00 15 $61.70 30.5 $71.70 47 $94.90 65 $124.00 16 $61.70 31 $71.70 48 $94.90 66 $141.40 16.5 $61.70 32 $71.70 49 $94.90 67 $141.40 17 $61.70 32.5 $71.70 50 $94.90 68 $141.40 18 $61.70 33 $71.70 50.5 $98.80 69 $141.40 18.5 $61.70 34 $71.70 51 $98.80 70 $141.40 19 $61.70 35 $71.70 52 $98.80 75 $153.00 20 $61.70 36 $85.30 53 $98.80 76 $153.00 20.5 $61.70 37 $85.30 54 $98.80 78 $153.00 21 $61.70 38 $85.30 55 $98.80 80 $168.50 22 $61.70 38.5 $85.30 56 $111.20 85 $184.00 23 $61.70 39 $85.30 57 $111.20 90 $184.00 23.5 $61.70 40 $85.30 58 $111.20 95 $201.50 24 $61.70 40.5 $85.30 59 $110.40 100 $215.00 25 $61.70 41 $87.20 60 $111.20 105 $227.20 25.5 $61.70 42 $87.20 60.5 $111.20 110 $233.40 26 $62.00 43 $87.20 61 $124.00 115 $233.90 27 $62.00 44 $87.20 62 $124.00 120 $248.70 28 $62.00 Carbide hole saw Powermax 10 Easy-Cut. The flat-cut hole saw of the next generation. Extra strong body material. Up to 12mm cutting depth possible. The low cutting width (2.2mm) enables boreholes up to 120mm with hand drills. All diameters with interchangeable shank. Diameter 201010a Diameter 201010a Diameter 201010a Diameter 201010a 14 $38.40 29 $46.10 45 $67.80 63 $106.60 14.5 $38.40 30 $46.10 46 $77.10 64 $106.60 15 $38.40 30.5 $46.10 47 $77.10 65 $106.60 16 $38.40 31 $46.10 48 $77.10 66 $123.60 16.5 $38.40 32 $53.90 49 $77.10 67 $123.60 17 $38.40 32.5 $53.90 50 $77.10 68 $123.60 18 $38.40 33 $53.90 50.5 $81.00 69 $123.60 18.5 $38.40 34 $53.90 51 $81.00 70 $123.60 19 $38.40 35 $53.90 52 $81.00 75 $131.70 20 $38.40 36 $67.80 53 $81.00 76 $145.30 20.5 $38.40 37 $67.80 54 $81.00 78 $145.30 21 $38.40 38 $67.80 55 $92.60 80 $145.30 22 $38.40 38.5 $67.80 56 $92.60 85 $162.70 23 $38.40 39 $67.80 57 $92.60 90 $162.70 23.5 $38.40 40 $67.80 58 $92.60 95 $178.20 24 $38.40 40.5 $67.80 59 $92.60 100 $193.30 25 $38.40 41 $67.80 60 $92.60 105 $200.90 25.5 $38.40 42 $67.80 60.5 $92.60 110 $207.10 26 $46.10 43 $67.80 61 $106.60 115 $207.60 27 $46.10 44 $67.80 62 $106.60 120 $222.40 28 $46.10
Power Max 60-201121 Allround Power-Max hole saws with Easy-Change quick-change shank system for almost unlimited use on hand drills, core drilling machines, drill presses, radial drill, turning centre, etc. Diameter 201121 Diameter 201121 Diameter 201121 25 $104.60 60 $162.70 76 $236.30 30 $104.60 63 $172.40 78 $240.05 35 $110.40 65 $184.00 80 $244.10 40 $118.20 68 $191.80 85 $261.50 45 $125.90 70 $209.20 90 $278.90 50 $135.60 71 $215.00 95 $296.30 55 $137.50 74 $228.60 100 $317.70 58 $153.00 75 $228.60 105 $335.10 Carbide hole saw Powermax 60 Allround. For electricians, sanitary and heating installers, carpenters and cabinet makers, carpentries, stairway and kitchen studios. The ideal solution for almost any material. Compared with commercial models the higher number of teeth guarantees clean cutting edges as well as longer durability. Soft wood, hard wood, & exotic wood across the grain. Wood with inclusions like nails, clips, concrete residue. Blockboards, Plywood, Fibre boards. Chipboard and hardboard without laminate. Panel materials plastic laminated. Panel materials with veneer. 201121a Cemented fibre boards & compound boards, Mineral wool and Plasterboards. Decorative boards, hardpaper, hardfibre. Veneers. Plastics, Plexiglass, Acrylics, Duro-and- Thermoplastics. compounds and sandwich materials, recycled materials. Autoclaved aerated concrete blocks. Diameter 201121a Diameter 201121a Diameter 201121a 25 $81.40 60 $135.60 76 $213.10 30 $81.40 63 $147.20 78 $216.70 35 $85.30 65 $158.90 80 $220.80 40 $96.90 68 $166.60 85 $236.30 45 $104.60 70 $186.00 90 $251.80 50 $112.40 71 $189.80 95 $267.30 55 $116.20 74 $205.30 100 $290.50 58 $127.90 75 $205.30 105 $306.00 Order codes: Power Max60 Holesaw eg: for 20mm Complete 201121020 eg: for 20mm cutter only 201121a020 Quality Cutting Tools - March 2010 Pg: 11
Power Max 30-201130 Heavy-Duty Power-Max hole saws with Easy-Change quick-change shank system for almost unlimited use on hand drills, core drilling machines, drill presses, radial drill, turning centre, etc. Special Steel/Stainless Unalloyed Steel Diameter 201130 Diameter 201130 Diameter 201130 Diameter 201130 14 $88.00 33 $118.20 54 $127.90 76 $218.90 15 $93.00 34 $118.20 55 $127.90 77 $218.90 16 $93.00 35 $118.20 56 $153.00 78 $218.90 16.5 $93.00 36 $118.20 57 $153.00 79 $218.90 17 $93.00 37 $118.20 58 $153.00 80 $218.90 18 $94.90 38 $118.20 59 $153.00 81 $218.90 19 $94.90 39 $118.20 60 $153.00 82 $218.90 20 $94.90 40 $118.20 60.5 $153.00 83 $218.90 20.5 $94.90 40.5 $118.20 61 $168.50 84 $218.90 21 $94.90 41 $125.90 62 $168.50 85 $236.30 22 $94.90 42 $125.90 63 $168.50 86 $236.30 23 $94.90 43 $125.90 64 $168.50 87 $236.30 24 $94.90 44 $125.90 65 $168.50 88 $236.30 25 $94.90 45 $125.90 66 $187.90 89 $236.30 25.5 $94.90 46 $127.90 67 $187.90 90 $242.10 26 $108.50 47 $127.90 68 $187.90 92 $242.10 27 $108.50 48 $127.90 69 $187.90 95 $257.60 28 $108.50 49 $127.90 70 $187.90 100 $259.60 29 $108.50 50 $127.90 71 $194.80 105 $259.60 30 $108.50 50.5 $127.90 72 $194.80 110 $280.70 31 $118.20 51 $127.90 73 $194.80 115 $328.30 32 $118.20 52 $127.90 74 $194.80 120 $371.50 32.5 $118.20 53 $127.90 75 $199.50 Carbide hole saw Powermax 30 Heavy-Duty. The deep-cutting hole core saw of the next generation. Extremely strong body material. Up to 30mm cutting depth possible. Thanks to the extremely strong body material and the cutting width (4.0mm) it is applicable for up to 40mm on hand drills. In case it should be more than 40mm we recommend the use of core drilling machines/drill press. Aluminium Non-Ferrus Metals Plastics Sandwich Materials 201130a Order codes: Power Max30 Holesaw eg: for 20mm Complete 201130020 eg: for 20mm cutter only 201130a020 Diameter 201130a Diameter 201130a Diameter 201130a Diameter 201130a 14 $62.20 33 $87.20 54 $96.90 76 $187.90 15 $65.90 34 $87.20 55 $96.90 77 $187.90 16 $65.90 35 $87.20 56 $122.10 78 $187.90 16.5 $65.90 36 $87.20 57 $122.10 79 $187.90 17 $65.90 37 $87.20 58 $122.10 80 $187.90 18 $67.80 38 $87.20 59 $122.10 81 $187.90 19 $67.80 39 $87.20 60 $122.10 82 $187.90 20 $67.80 40 $87.20 60.5 $122.10 83 $187.90 20.5 $67.80 40.5 $87.20 61 $122.10 84 $187.90 21 $67.80 41 $94.90 62 $137.50 85 $205.30 22 $67.80 42 $94.90 63 $137.50 86 $205.30 23 $67.80 43 $94.90 64 $137.50 87 $205.30 24 $67.80 44 $94.90 65 $137.50 88 $205.30 25 $67.80 45 $94.90 66 $156.90 89 $205.30 25.5 $67.80 46 $96.90 67 $156.90 90 $211.10 26 $77.50 47 $96.90 68 $156.90 92 $211.10 27 $77.50 48 $96.90 69 $156.90 95 $226.60 28 $77.50 49 $96.90 70 $156.90 100 $228.60 29 $77.50 50 $96.90 71 $156.90 105 $228.60 30 $77.50 50.5 $96.90 72 $156.90 110 $240.00 31 $87.20 51 $96.90 73 $156.90 115 $287.70 32 $87.20 52 $96.90 74 $156.90 120 $330.90 32.5 $87.20 53 $96.90 75 $168.50 Pg: 12 Quality Cutting Tools - March 2010
For Hand Drills x 14-60 mm 201131 $27.20 201010 x 61-120 mm 201137 $27.20 201010, 201121, 201130 Use without hammer drill function. Accessories for Powermax x 14-120 mm 201123 $40.70 201011 $6.50 201012 $8.10 201110 $7.70 201010, 201121, 201130 x 105-120 mm 201156 $31.65 201010 201137, 201123 201130 201130 201114 $8.29 201121 For all materials but gas concrete stones 201127 $11.20 For drilling into gas concrete stones 201133 $8.10 x 14-60 mm 201134 $27.20 201130 201121 201137, 201123 For Drill Presses Morse Taper 2 201010, 201121, 201135 201130 $65.90 x 14-120 mm Morse Taper 3 201136 $77.50 Morse Taper 3 x 105-120 mm 201459 $57.10 201130 Morse Taper 3 x 105-120 mm 201469 $67.60 201130 201010, 201121, 201130 x 14-120 mm 201012 $8.10 201010 201114 $8.29 201121 For all materials but gas concrete stones 201127 $11.20 201121 For drilling into gas concrete stones 201133 $8.10 201130 For Core Drilling Machines Adaptor suitable for Core Drilling Machines:- Alfra- Rotabest + Alfra Rota-Quick, BDS+BDS Keyless, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magnetor, Metallkraft, Promag, Rotabroach, Ruko Easy Lock, Universal. 201442 $40.70 x 14-120 mm 201010, 201130 Adaptor suitable for Core Drilling Machines:- Alfra- Rotabest + Alfra Rota-Quick, BDS+BDS Keyless, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magnetor, Promag, Rotabroach, Ruko, Universal. 201444 $50.40 x 14-120 mm 201010, 201130 Adaptor suitable for Core Drilling Machines:- Fein Quick-In x 14-120 mm 201443 $50.40 201010, 201130 Adaptor suitable for Core Drilling Machines:- Alfra-Rotabest, BDS, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Metallkraft, Promag, Rotabroach, Ruko. 201453 $50.40 201130 x 61-100 mm Adaptor suitable for Core Drilling Machines:- Alfra-Rotabest, BDS, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Metallkraft, Promag, Rotabroach, Ruko. 201458 $39.00 201130 x 105-120 mm 201261 $27.70 201010 201271 $29.60 201130 Quality Cutting Tools - March 2010 Pg: 13
Karnasch Step Drills The patented Blue-Dur coating significantly increases durability. Absolutely recommendable for difficult materials like special steels/stainless steels or in case cooling lubricants can not really be used. A 35gspiral completely made of solid material ensures: a. Easy cutting b. No getting stuck in the material c. Low chipping forces d. Less flash build-up e. Much higher durability All Karnasch step drills.conical drills are made of high-alloyed HSS XE steel for a hardness of up to 68 HRC and highest wear resistance. All Karnasch sept drills/conical drills are shipped complete with outlasered diameter and speed information. Karnasch High-Tech step drills with spiral Maximum Cutting Depth 5mm 201447 $92.20 Maximum Cutting Depth 4mm 201448 $106.20 Maximum Cutting Depth 4mm 201449 $169.80 Maximum Cutting Depth 4mm 201450 $175.60 Karnasch XE steel setp drills with spiral and BLUEDUR coating cover the entire specrum of body openings according to the new M12-M40 standard. The step drills have a short drill step (3mm or 4mm) for cable outlets in thin-walled bodies (wall thickness max. 3mm as well as 4mm) and a long drill step (6mm) for tapping drill holes in distribution boxes (wall thickness max. 5.5mm) Maximum Cutting Depth 6mm xmm 7 10.5 14.5 18.5 23.5 30.5 38.5 - M12x1.5 M16x1.5 M20x1.5 M25x1.5 M32x1.5 M40x1.5 Maximum Cutting Depth 4mm xmm 12.5 16.5 20.5 25.5 32.5 40.5 M12x1.5 M12x1.5 M16x1.5 M20x1.5 M25x1.5 M32x1.5 201451 $268.40 Pg: 14 Quality Cutting Tools - March 2010
Karnasch High-Tech conical drill with spiral 201472 $123.00 201473 $248.00 Karnasch High-Tech conical drill 201460 $71.30 201462 $138.20 201461 $95.20 201463 $196.20 Karnasch Step Drill/ Conical Drill Sets Complete Step Drills Set Content xmm 201447 4-12 201448 4-20 201449 6-30 201450 6-36 201470 6-38 201490 $741.80 Basic Step Drill Set Content xmm 201447 4-12 201448 4-20 201449 6-30 201466 $368.00 Cable Connection Step Drill Set Content xmm 201441 7-32.5 201451 7-40.5 201493 $434.40 Basic Conical Drill Set Content xmm 201460 3-14 201461 6-20 201462 16-30 201467 $304.60 Hi-Tech Conical Drill with Spiral Set Content xmm 201472 4-20 201473 5-31 201496 $398.60 Quality Cutting Tools - March 2010 Pg: 15
Designed for industrial applications. Each step produces accurate, parallel holes with a small clearance on the nominal diameter. The maximum material thickness is determined by the length of step (if the work piece can be reversed multiply thickness by 2). For use in industrial power tools or pedestal drilling machines Metric Part # Drill Size (mm) Max. Drilling Speed RPM Chuck List Mat Size Non- Price Thick Ferrous Ferrous MC1M 4 5 6 7 8 9 10 11 12 5mm 6.5mm 400-800 900-2000 $43.86 MC2M 10 11 12 13 14 15 16 17 18 19 20 4mm 10mm 200-600 500-1500 $62.04 MC3M 20 21 22 23 24 25 26 27 28 29 30 4mm 13mm 150-400 400-1000 $93.88 MC4M 4 6 8 10 12 10mm 6.5mm 400-800 900-2000 $47.35 MC5M 6 8 10 12 14 16 18 20 22 24 5mm 10mm 150-400 400-1000 $73.75 MC6M 6 8 10 12 14 16 18 5mm 10mm 200-600 500-1500 $58.47 MC7M 4 6 8 10 12 14 16 18 20 4mm 10mm 200-600 500-1500 $58.97 MC8M* 14 16 18 20 22 44 5mm 13mm 150-400 400-1000 $71.25 MC9M* 20 22 24 26 28 30 32 34 5mm 13mm 150-300 300-800 $113.55 4 6 8 10 12 14 16 18 20 MC10M 22 24 26 28 30 4mm 13mm 150-400 400-1000 $106.31 MC11M 4 6 8 10 12 14 16 18 20 22 5mm 10mm 150-400 400-1000 $67.65 MC535 5 7.5 10 13 16 19 21 23 3.5mm 13mm 100-300 26 29 31 33 35 300-700 $116.54 Imperial Part # MC1E MC2E MC3E MC4E MC5E Drill Size (mm) 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1.1/16 1.1/8 3/4 13/16 7/8 15/16 1 1.1/16 1.1/8 1.3/16 1.1/4 1.5/16 1.3/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 Max. Chuck Mat Size Thick Drilling Speed RPM Non- Ferrous Ferrous List Price 1/8 1/4 400-800 900-200 $42.41 1/8 3/8 200-600 500-1500 $61.20 1/8 3/8 150-400 400-1000 $84.93 1/8 1/2 100-300 300-500 $114.62 1/8 3/8 200-400 100-1200 $67.68 MC6E 3/16 1/4 5/16 3/8 7/16 1/2 3/8 1/4 300-800 800-2000 $47.00 MC7E 3/16 1/4 5/16 3/8 7/16 1/2 1/8 1/4 300-800 800-2000 $34.19 MC8E* 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1/8 1/2 150-400 400-1000 $71.40 13/16 7/8 15/16 1 1.1/16 1.1/8 MC9E* 1.3/16 1.1/4 1.5/16 1.3/8 1/8 1/2 150-300 300-800 $112.76 Part # Part # Drill Size (mm) Variable sizes of larger diameters can now be drilled without the need for a pre-drilled hole, with smooth multi-flute action ensuring that clean round holes are produced. For drilling holus up to 4mm thick in most materials and incorporating popular diameters for PG, Conduit, BS pipe and automotive fittings. Trepanning Action Multicut Max. Chuck Mat Size Thick Drilling Speed RPM Non- Ferrous Ferrous List Price 30 31 32 33 34 35 TMC3040 4mm 36 37 38 39 40 13mm 100-300 300-500 $202.98 40 41 42 43 44 45 TMC4050 4mm 46 47 48 49 50 13mm 50-200 200-400 $293.20 50 51 52 53 54 55 TMC5060 4mm 56 57 58 59 60 13mm 50-150 150-400 $372.18 Approx start Diam Drill Size (mm) Max. Chuck Mat Size Thick Drilling Speed RPM Non- Ferrous Ferrous List Price MC1625 6mm 16 20 25 holes for conduit entry 3.5mm 10mm 150-400 400-1000 $66.23 MC1632 11mm 16 20 25 32 holes for conduit entry 3.5mm 13mm 130-300 300-800 $90.22 Drills clearance holes for PG fittings PG7 9 11 13.5 MCPG 6.5mm 21 16 21 also 30.5 3mm 13mm 130-300 300-800 $92.14 pushbutton holes Drills clearance for PG fittings PG7 9 MCPG 6.5mm 11 13.5 16 21 29 29 also 33 35 30.5mm pushbutton holes 3mm 13mm 100-300 30-500 $119.04 Drills clearnace holes to take 3/8 7/16 3/4 screw MC521 5mm sizes for Greenlee standard punches, slug buster punches and slug 4mm 10mm 200-500 500-1300 $57.25 MC3/4 KO MC1KO Special Application Multicut splitter punches Drills clearance 5.5mm holes for 7/8 (1/2 3.5mm 10mm 150-400 400-1000 $67.65 KO) 1.1/8 (3/4 KO) Drills clearance holes for 7/8 (1/2 5.5mm KO) 1.1/8 (3/4 KO) 3.5mm 10mm 150-300 300-800 $112.76 1.7/32 (Oil Tight) 1.1/4 1.3/8 (1 KO) TiN- Titanium Nitride Coated Multicut Part # Drill Size (mm) Max. Drilling Speed RPM Chuck List Mat Size Non- Price Thick Ferrous Ferrous MC1MTiN 4 5 6 7 8 9 10 11 12 5mm 6.5mm 400-800 900-2000 $87.72 MC2MTiN 10 11 12 13 14 15 16 17 18 19 20 4mm 10mm 200-600 500-1500 $124.09 MC3MTiN 20 21 22 23 24 25 26 27 28 29 30 4mm 13mm 150-400 400-1000 $180.41 Multicut Sets Part # Contains Tool Numbers Range List Price MCS1 MC1M, MC2M, MC3M 4-30mm $225.23 MCS1TiN MC1MTiN, MC2MTiN, MC3MTiN 4-30mm $421.07 MCS2 MC1E, MC2E, MC3E 1/8-1.1/8 $214.25 Pg: 16 Quality Cutting Tools - March 2010
COUNTERSINK 5 Flute The 90 Angle together with the 0 rake angle makes this tool suitable for countersinking ferrous metals, hard plastics and wood. Overall Shank Shank List Part # Diameter Length diam Lenth Price CS5 8 8mm (5/16 ) 35mm 5mm 20.5mm $16.72 CS5 12 12mm (5/8 ) 39mm 6.35mm 20.5mm $17.93 CS5 16 16mm (5/8 ) 52mm 8mm 32mm $27.36 CS5 20 20mm (3/4 ) 58mm 10mm 35mm $34.37 3 Flute Morse Taper Shank Head Nominated Shank List Part # Diameter Length Diam Price MT CS3 16 16.5mm 85mm No1 MTS $95.66 MT CS3 20 20.5mm 100mm No2 MTS $100.25 MT CS3 25 25mm 106mm No2 MTS $113.16 MT CS3 31 31mm 112mm No2 MTS $152.28 MT CS3 40 40mm 140mm No3 MTS $224.08 5 Flute Countersink Kit 3 Flute To DIN 335C 90 Angle The positive rake angle means that a quick cutting action together with a chatter-free operation is possible when Countersinking both ferrous and non-ferrous metals, hard and soft plastics. Nominated Shank List Part # Diameter Length Diam Price CS3 6 6.3mm 45mm 5mm $22.03 CS3 8 8.3mm 50mm 6mm $24.83 CS3 10 10.4mm 50mm 6mm $31.30 CS3 12 12.4mm 56mm 8mm $37.60 CS3 16 16.5mm 60mm 10mm $54.09 CS3 20 20.5mm 63mm 10mm $66.73 CS3 25 25mm 67mm 10mm $91.13 CS3 28 28mm 71mm 12mm $108.77 CS3 31 31mm 71mm 12mm $123.53 Part # Kit Contains List Price CS5 K1 CS5 8, CS5 12, CS5 16, CS5 20 $98.35 3 Flute Countersink Kit HSS Hole Type Deburring Cutters The arrangement of the through hole in relation to the precision-ground head results in a clean-cutting chatter-free tool for deburring and chamfering a wide range of materials at acceptable production speeds. Chip clearance is excellent and therefore makes these tools particularly suitable for soft alloys such as aluminium and brass, as well as all ferrous metals. Hole type deburring cutters are relatively simple to resharpen by grinding the cutting face inside the hole. 90 Angle Part # Kit Contains List Price CS3 S1 CS3 6, CS3 8, CS3 10, CS3 12, CS3 16, CS3 20 $255.79 Hole Type Deburring Cutter Kit Overall Shank Shank List Part # Range Length diam Lenth Price DC 25 2-5mm 45mm 6mm 32mm $21.00 DC 510 5-10mm 48mm 8mm 30.5mm $27.07 DC 1015 10-15mm 65mm 10mm 37.5mm $45.89 DC 1520 15-20mm 84mm 12mm 48mm $80.85 DC 2025 20-25mm 102mm 15mm 56.5mm $117.46 DC 2530 25-30mm 115mm 15mm 55.0mm $170.52 DC 3035 30-35mm 127mm 15mm 60.5mm $232.30 Part # Kit Contains List Price DC S1 DC 25, DC 510, DC 1015, DC 1520 $196.99 Quality Cutting Tools - March 2010 Pg: 17
COUNTERBORES Plain Shank Solid type with integral pilot, Manufactured to BS 328 PART 5/ISO DIN 373 for use in chucks or collets. Morse Taper Shank For use in Morse taper sockets. Detachable pilot type. BS 328 PART 5/ISO DIN375/1868 Normal Nominal Shank Overall List Part # Cutting Diam Pilot Diam Diam Length Price M3 P 6.00mm 3.4mm 5.0mm 71mm $50.50 M3.5 P 6.50mm 3.9mm 5.0mm 71mm $50.50 M4 P 8.00mm 4.5mm 5.0mm 71mm $42.50 M5 P 10.00mm 5.5mm 8.0mm 80mm $57.00 M6 P 11.00mm 6.6mm 8.0mm 80mm $62.00 M8 P 15.00mm 9.0mm 12.5mm 100mm $65.00 M10 P 18.00mm 11.0mm 12.5mm 100mm $74.50 M12 P 20.00mm 14.0mm 12.5mm 100mm $90.00 Counterbore Pilot Mt Normal Part # Cutting Diam Length List Nominal Spigot List Shank Price Diam Diam Price No M8 T 15mm 132mm 2 $89.63 9mm 4mm $27.47 M10 T 18mm 140mm 2 $94.87 11mm 5mm $28.66 M12 T 20mm 140mm 2 $106.89 14mm 5mm $33.16 M14 T 24mm 150mm 2 $128.87 16mm 6mm $33.97 M16 T 26mm 180mm 3 $158.13 18mm 8mm $35.16 M18 T 30mm 180mm 3 $175.12 20mm 8mm $46.61 M20 T 33mm 190mm 3 $194.77 22mm 10mm $47.12 M22 T 36mm 190mm 3 $220.25 24mm 10mm $61.49 M24 T 40mm 190mm 3 $253.32 26mm 10mm $63.30 Screwed Shank Solid type with integral pilot. For use in Clarkson type holder. Counterbore Sets Normal Nominal Shank Overall List Part # Cutting Diam Pilot Diam Diam Length Price M4 S 8.00mm 4.5mm 6.0mm 65.0mm $49.52 M5 S 10.00mm 5.5mm 6.0mm 70.0mm $53.89 M6 S 11.00mm 6.6mm 6.0mm 76.0mm $58.57 M8 S 15.00mm 9.0mm 10.0mm 87.3mm $61.49 M10 S 18.00mm 11.0mm 10.0mm 89.0mm $70.29 M12 S 20.00mm 14.0mm 12.0mm 108.0mm $84.93 Part # Shank MContains List Price CB S1 Plain M3 P, M4 P, M5 P, M6 P, M8 P, M10P $360.23 CB S2 Screwed M4 S, M5 S, M6 S,M8 S, M10 S $307.50 Pg: 18 Quality Cutting Tools - March 2010
Compact and handy design Powerful 1100 Watt motor $1 200.00 Variable rotation speed Soft Start approach Easy to use Lightweight Manoeuvrable The small milling head can reach everywhere accurate and continuously variable adjustablity Burr-free ground welding angles Variable rotation speed Perfect Radius 2,5 angles Grinding welding angles, even in difficult positions Making a countersink Perfect round finish R2,5 profile is only a matter of seconds! Quality Cutting Tools - March 2010 Pg: 19
The LKF.450/2 machine is perfectly suited for making welding angles, to countersink drilled holes and to de-burr material. The Euroboor bevelling machine weighs a mere 4.7kg, making it very user-friendly and the ergonomic grip keeps it well handled. Thanks to the variable adjustable speed, this machine s not only suitable for regular steel, but also for materials such as stainless steel and aluminium. It is driven by a powerful 1100 Watt motor, which is equipped with a soft-start feature. LKF.450/2 machines come standard with a 45 gmilling head, including 2 high-quality cutting plates which can be used on 3 sides by re-positioning them. You can upgrade your machine with both 30 gand Radius 2.5 milling heads. Cutting depth is accurate and continuously variable adjustable. 45g LKF.450/2 Voltage 115v/60hz and 230b/50hz Capacity 1100 Watt Rotational Speed Variable 3000-6000/min (-1) Angle Milling Head 30 g 45 gor radius 2,5 g Width Range 30 0-5mm variable g 45 0-6mm variable Safety Soft Start Dimensions LxBxH 265 x 125 x 305mm Weight 4.7kg Optional 30g Machine LKF.450/2 Milling head 45 gincluding 2 cutting plates key SW 22 Plastic carrying case LKS.20 $17.90 Pg: 20 Quality Cutting Tools - March 2010
PB32 Electomagnetic Drilling Systems PB32 COMBI Height Width Depth Travel Weight 300mm 90mm 240mm 165mm 12.5kgs Total Power Motor Magnetic Adhesion Voltage Speed Cutter Capacity Drilling Capacity 770 watt 720 watt 1000kgs 220/240v or 110v (A.C. Supply) 550 rpm (no load) 12mm to 32mm 18mm The Powerbor PB32 has been ergonomically designed to provide an electromagnet drilling machine that is totally user friendly. The incredible power to weight ratio is such that the PB32 is considered by many to be the most versatile and durable machine of its type in the world today, and incorporates the following value-added features: Model No Price + GST PB32 - Without Coolant $1 850.00 PB32-AK - With Coolant $1 960.00 Fitted with reliable and well-proven Hitachi D13 680 watt power unit Free 13mm (1/2 ) drill chuck All Powerbor standard features and backed by a full range of replacement spares readily available from stock Available options include a complete coolant system (PB32-AK) Height Width Depth Travel Weight 300mm 90mm 240mm 165mm 12.5kgs Total Power Motor Magnetic Adhesion Voltage Speed Cutter Capacity Drilling Capacity Tapping Capacity 770 watt 720 watt 1000kgs 220/240v or 110v (A.C. Supply) 25-550 rpm variable (no load) 12mm to 32mm 18mm 12mm The PB32 Combi has the same excellent power to weight ratio as the PB32. In addition it has forward, reverse and variable speed as standard, providing a choice of tapping, cutting and rilling capability. Model No PB32C - Without Coolant PB32C-AK - With Coolant Forward and reverse facility Fitted with reliable and well-proven Hitachi D13 680 watt power unit Free 13mm (1/2 ) drill chuck Price + GST P.O.A. P.O.A. All Powerbor standard features and backed by a full range of replacement spares readily available from stock Available options include a complete coolant system (PB32C-AK) Dual carrying handles for enhanced operating manoeuvrability Reversible handles for use in restrictive conditions Improved high density magnet for maximum adhesion Corrosive resistant, tangle-free cable from stand to drill unit The Powerbor Standard - Included will all machines Isolating power relay for improved handling safety Control panel situated conveniently on the same side as the traverse handles free protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set Quality Cutting Tools - March 2010 Pg: 21
Electomagnetic Drilling Systems PB45 PB70 Height Width Depth Travel Weight 370mm 115mm 280mm 200mm 20kgs Total Power Motor Magnetic Adhesion Voltage Speed Cutter Capacity Drilling Capacity 1200 watt 1150 watt 1500kgs Dual carrying handles for enhanced operating manoeuvrability Reversible handles for use in restrictive conditions Improved high density magnet for maximum adhesion Corrosive resistant, tangle-free cable from stand to drill unit Pg: 22 Quality Cutting Tools - March 2010 220/240v or 110v (A.C. Supply) 250 rpm / 450 rpm (load speed) 12mm to 45mm 23mm Arbor MT 2 The cutting capacity to weight ratio of the POWERBOR PB45 complements the PB32 but adds more cutting power. The cutting and drilling power of the PB45 has the cutting and drilling power normally associated with much heavier machines. Its introduction was in response to demand from customers worldwide and confirms Powerbor s commitment to a continuous product development program. Model No Price + GST PB45 $2 350.00 Fitted with a quality tried and tested Eibenstock 2 speed motor unit All Powerbor standard features are backed by a full range of replacement spares readily available from stock Comes with a complete external coolant system Model No Price + GST PB70 $2 990.00 Height 445mm Width 110mm Depth 330mm Travel 200mm Weight 22kgs The POWERBOR PB70 has been carefully designed to guarantee enhanced power and versatility. In fact, the high performance capabilities of the PB70 when compared with similar size machines makes this drill one of the best investments available. A proven, powerful performer and still portable enough to be used on-site or in the workshop, the PB70 provides the perfect solution to even the most difficult of drilling applications. It incorporates a reversible variable speed motor as standard, allowing it to be readily used for tapping applications. Constant torque Thermal overload protection Electro-torque control Mechanical clutch Fitted with a quality tried and tested Eibenstock Soft start motor Infinitely variable speed Forward and reverse facility The Powerbor Standard - Included will all machines Total Power 1850 watt Motor 1800 watt Magnetic Adhesion 1500kgs Voltage 220/240v or 110v (A.C. Supply) Speed 60/140rpm 240/470 rpm (load speed) Cutter Capacity 12mm to 70mm Drilling Capacity 32mm Tapping Capacity 24mm Arbor MT 3 1800 watt motor unit All Powerbor standard features are backed by a full range of replacement spares readily available from stock Comes with a complete external coolant system Isolating power relay for improved handling safety Control panel situated conveniently on the same side as the traverse handles free protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set
Electomagnetic Drilling Systems PB70/2 PB100E Model No Price + GST PB70/2 $2 520.00 Height Width Depth Travel Weight 445mm 110mm 330mm 200mm 22kgs Total Power 1750 watt Motor 1700 watt Magnetic Adhesion 1500kgs Voltage 220/240v or 110v (A.C. Supply) Speed 120/410 rpm (load speed) Cutter Capacity 12mm to 70mm Drilling Capacity 32mm Arbor MT 3 Back to basics at an exceptional price. The PB70/2 is a workhorse that brings all the drilling capacity of the PB70 to applications that do not require the full range of professional variations. Proven Eibenstock 1700 watt motor All Powerbor standard features are backed by a full range of replacement spares Dual carrying handles for enhanced operating manoeuvrability Reversible handles for use in restrictive conditions Improved high density magnet for maximum adhesion Corrosive resistant, tangle-free cable from stand to drill unit Model No Price + GST PB100E $2 980.00 PB100ESB Swivel Base P.O.A. The Powerbor Standard - Included will all machines Truly putting the power into POWERBOR, the PB100E challenges all other machines in terms of power and reliability. Its base and body design achieves greatly enhanced rigidity and cutting capacity. The arbor design allows rapid cutter to twist drill change. The swivel base option is a customer-led development providing convenience and practicality and allowing precise positioning of the cutter. The weight is taken by the powerful magnet - a superb innovation especially for difficult working conditions. Height Width Depth Travel Weight 480mm 110mm 320mm 280mm 25kgs Total Power 1750 watt Motor 1700 watt Magnetic Adhesion 2000kgs Voltage 220/240v or 110v (A.C. Supply) Speed 110, 175, 245, 385 rpm (load speed) Cutter Capacity 12mm to 100mm Drilling Capacity 32mm Arbor MT 3 Swivel option allows for movement of the machine s body through 260 degrees and a lateral movement of 22mm Fitted with a quality tried and tested Eibenstock motor unit All Powerbor standard features are backed by a full range of replacement spares readily available from stock With a complete coolant system Isolating power relay for improved handling safety Control panel situated conveniently on the same side as the traverse handles free protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set Quality Cutting Tools - March 2010 Pg: 23