Emergency Shear Valves 0060 Underpump Emergency Valve The Emco Wheaton 0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually operated to facilitate dispenser maintenance and incorporates a 3/8 test port. The closing poppet assembly is positioned out of the fuel flow path to minimize pressure drop. The 0060 can utilize a standard three boss mounting arrangement and includes U-bolt mounting hardware. Now available in single or double poppet variants. Mounting Hardware Included UL listed ody: Cast Iron Spring: Stainless Steel Seal: Viton Viton is a registered trademark of DuPont Dow Elastomers. Model No. Description Inlet Outlet Weight 0060-001 1 1 ¼2 Single Poppet Female Union 5.0 lbs. 7.2 2.5 0060-002 1 1 ¼2 Single Poppet Female Male 4.0 lbs. 6.9 2.2 0060-003 1 1 ¼2 Single Poppet Female Female 4.0 lbs. 6.4 1.7 0060-015 1 1 ¼2 Single Poppet Female SP Male SP 4.0 lbs. 6.9 2.2 0060-016 1 1 ¼2 Single Poppet Female SP Female SP 4.0 lbs. 6.4 1.7 0060-022 1 1 ¼2 Double Poppet Female Male 4.2 lbs. 8.0 3.3 0060-023 1 1 ¼2 Double Poppet Female Female 4.2 lbs. 9.0 2.2 0060-025 1 1 ¼2 Double Poppet Female SP Male SP 4.2 lbs. 8.0 3.3 0060-026 1 1 ¼2 Double Poppet Female SP Female SP 4.2 lbs. 9.0 2.2 Optional Items: No. Description Outlet Weight 492937 1 1 ¼2 Replacement Top; 1 Poppet Union 2.4 lbs. 492938 1 1 ¼2 Replacement Top; 1 Poppet Male 1.4 lbs. 492939 1 1 ¼2 Replacement Top; 1 Poppet Female 1.4 lbs. 493885 1 1 ¼2 Replacement Top; 1 Poppet Female SP 1.4 lbs. 493886 1 1 ¼2 Replacement Top; 1 Poppet Male SP 1.6 lbs. 493887 1 1 ¼2 Replacement Top; 2 Poppets Male 1.6 lbs. 493888 1 1 ¼2 Replacement Top; 2 Poppets Female 1.6 lbs. 493889 1 1 ¼2 Replacement Top; 2 Poppets Male SP 1.6 lbs. 493890 1 1 ¼2 Replacement Top; 2 Poppets Female SP 1.6 lbs. 492954 Fusable Link Kit 0065 Mounting Kit The Emco Wheaton 0065 Mounting Kit is used to mount the 0060 to the dispenser pan stabilizer bar. The kit includes 2 U-bolts, 4 lock washers, 4 hex nuts, 3 socket head counter-sunk screws and mounting plate. 34
Emergency Shear Valves 0061 Underpump Emergency Valve The Emco Wheaton 0061 Emergency Shear Valve incorporates all of the features of the 0060 plus a universal mounting plate and hardware for easy installation in any dispenser sump or pan. The top shear section is completely independent of the lower assembly and can be replaced without disturbing the poppet seal. UL listed Secondary poppet hold open to reduce flow restriction Poppet seat independent of top shear section for extra safety during top replacement Integral mounting plate (mounting hardware included) Compact design gives extra working room in crowded containment chambers 2.25 VLVES & FITTINGS ody: Cast Iron Spring: Stainless Steel Seal: Viton Viton is a registered trademark of DuPont Dow Elastomers. Mounting Model No. Description Inlet Outlet Weight Plate Width 0061-002 1 1 ¼2 Single Poppet Female Male 9.3 lbs. 7.4 2.3 5.1 0061-003 1 1 ¼2 Single Poppet Female Female 9.0 lbs. 7.0 1.9 5.1 0061-022 1 1 ¼2 Double Poppet Female Male 9.3 lbs. 8.3 3.2 5.1 0061-023 1 1 ¼2 Double Poppet Female Female 9.0 lbs. 7.2 2.1 5.1 Optional Items: No. Description Outlet Weight 493822 1 1 ¼2 Replacement Top; 1 Poppet Male 2.9 lbs. 493823 1 1 ¼2 Replacement Top; 1 Poppet Female 2.6 lbs. 493825 1 1 ¼2 Replacement Top; 2 Poppets Male 2.9 lbs. 493826 1 1 ¼2 Replacement Top; 2 Poppets Female 2.6 lbs. 35
Vents 0084 Pressure Vacuum Vent The Emco Wheaton 0084 is an internal pressure vacuum valve that restricts vapor escape during product drops. It meets all regulatory codes requiring the installation of pressure vacuum vents. The 0084-009 is UL listed. Model No. Inlet Pressure Setting Vacuum Setting Weight 0084-004 2 13.86 H 2 0 (8.00oz.) 0.8 H 2 0 (0.50oz.) 1.7 lb. 5 9.5 0084-009 (Int l) 2 Clamp on 13.86 H 2 0 (8.00oz.) 0.8 H 2 0 (0.50oz.) 1.0 lb. 5 8.9 0084-100 2 2.00 H 2 0 (1.14oz.) 3.0 H 2 0 (1.88oz.) 1.7 lb. 5 9.5 0084-101 2 Clamp on 2.00 H 2 0 (1.14oz.) 3.0 H 2 0 (1.88oz.) 1.7 lb. 5 9.5 Viton is a registered trademark of DuPont Dow Elastomers. ody: luminum Seal: Viton Cap: Polyethlene 0084 ll Metal Pressure Vacuum Vent The Emco Wheaton 0084 is an internal pressure vacuum valve that restricts vapor escape during product drops. The body and cap are anodized aluminum for corrosion-free service. Model No. Inlet Pressure Setting Vacuum Setting Weight 0084-014 2 SP 13.86 H 2 0 (8.00oz.) 0.8 H 2 0 (0.50oz.) 2.0 lb. 0084-015 2 SP 13.86 H 2 0 (8.00oz.) 3.0 H 2 0 (1.88oz.) 2.0 lb. 0084-038 2 3.00 H 2 0 (1.73oz.) 8.0 H 2 0 (5.00oz.) 2.0 lb. 0084-103 2 Clamp On 3.00 H 2 0 (1.73oz.) 8.0 H 2 0 (5.00oz.) 2.0 lb. 0084-105 2 Clamp On 2.00 H 2 0 (1.14oz.) 0.8 H 2 0 (0.50oz.) 2.0 lb. 0084-200 2 2.00 H 2 0 (1.14oz.) 3.0 H 2 0 (1.88oz.) 2.0 lb. 0084-201 2 Clamp On 2.00 H 2 0 (1.14oz.) 3.0 H 2 0 (1.88oz.) 2.0 lb. 0084-204 2 13.86 H 2 0 (8.00oz.) 0.8 H 2 0 (0.50oz.) 2.0 lb. 0084-209 2 Clamp On 13.86 H 2 0 (8.00oz.) 0.8 H 2 0 (0.50oz.) 2.0 lb. 5.8 3.1 ody: luminum Seal: Viton Cap: luminum 4103 Upward V Vent The Emco Wheaton 4103 Upward V Vent utilizes a straight-up V design to rapidly disperse vapors. Slip-on style vent attaches to the pipe with three screws for easy installation. Removable feature permits cleaning of the screen. Designed in accordance with NFP 30 and UL listed. Model No. Inlet Weight 4103-002 1.5 & 2 Polyethylene 0.7 lbs. 5 5.9 4103-003 3 luminum 2.2 lbs. 6 5.2 0785 Downward Mushroom Vent The Emco Wheaton 0785 Downward Mushroom Vent is designed for downward venting of storage tanks. The 40 mesh brass screen can be easily removed for cleaning. The 0785 threads onto either 1.5 or 2.0 inch vent lines. Clear coated aluminum for corrosion-free service. Model No. Inlet Weight 0785-001 1.5 & 2 Female luminum 1.0 lbs. 0785-101 1.5 & 2 Female SP luminum 1.0 lbs. 2.5 4.0 36
Vents 9803 ST Emergency Vent The Emco Wheaton 9803 Emergency Vent consists of a body and a cap that moves vertically on a center pin. Internal tank pressure forces the cap upward, venting tank pressure, then automatically resets when the pressure returns to the preset level. Opening Vent Capacity Model No. Inlet Pressure CFH @ 2.5 PSI Weight 9803-004 4 Female 8oz. 95,000 9.3 lbs. 5.7 4.6 9803-004M 4 Male 8oz. 95,000 10.7 lbs. 5.7 6.3 9803-006 6 Female 8oz. 194,000 15.8 lbs. 7.9 4.5 9803-006M 6 Male 8oz. 194,000 19.0 lbs. 7.9 5.8 ody: Cast Iron Cap: Cast Iron Seal: rass Valves & dapters 0031 Riser Extension The Emco Wheaton 0031 is designed to compensate for height variances due to tank settlement and heaving. Model No. Size Weight 0031-175 4 Ductile Iron 2.4 lbs. 4 2.4 0031-250 4 Ductile Iron 3.6 lbs. 4 3.5 VLVES & FITTINGS 0066 Multi-Purpose Check Valve The Emco Wheaton 0066 Multi-Purpose Check Valve is designed to maintain prime and prevent unnecessary tripping of mechanical leak detectors. Model No. Size Weight 2.4 0066-020 2 rass 1.8 lbs. 2.6 0585-003 Extractor Pipe Cap The Emco Wheaton 0585-003 ar Style Extractor Pipe Cap is designed to thread directly on the extractor access pipes. Requires the 0560-003 ar Style Extractor Wrench. Model No. Size Gasket Weight 0585-003 4 Female luminum una-n 0.8 lbs. 1.6 4.8 37
Fill Caps & dapters 0097 Tight Fill Cap The Emco Wheaton 0097-005 Top Seal Fill Cap is designed for use on conventional 0030 or coaxial 0089 and 0096 dapters. The cap is lockable and features a self-aligning, toggle-action design with center collar to prevent breakage. Cams are brass, links are stainless steel, seal is una-n. The Emco Wheaton 0097-003 and -333 Top Seal Fill Caps are lockable lever action cam and groove type caps for use on 3 fill adapters. Gray color coded. Model No. Size pplication Weight 0097-005 Gray P.E.T. 4 Cam & Groove Domestic 1.2 lbs. 0097-003 luminum 3 Cam & Groove Domestic 0.8 lbs. 0097-333 luminum 3 Cam & Groove European 0.8 lbs. 2.4 2.0 0097-005 6.6 0097-003 0030 Tight Fill dapter The Emco Wheaton 0030 dapter is designed for use with conventional or dual point fill systems. Features recessed threads and a buna gasket. Model No. Thread Size dapter Size Weight 0030-003 rass 3 Female NPT 3 Cam & Groove 1.2 lbs. 4.0 2.2 0030-103 rass 3 Female SPP 3 Cam & Groove 1.2 lbs 4.0 2.2 0030-014 lum 4 Female NPSM 4 Cam & Groove 1.5 lbs. 5.5 4.0 0030-024 rass 4 Female NPSM 4 Cam & Groove 3.0 lbs. 4.9 2.2 0030-104 rass 4 Female SPP 3 Cam & Groove 3.0 lbs. 5.1 3.3 4.8 0030-124 Tight Fill Swivel dapter The Emco Wheaton 0030-124 dapter Swivel incorporates all the features of the 0030 dapter. The swivel feature prevents accidental loosening of threads. The 0030-124 is field serviceable; use o-ring kit 493995. Use the Emco Wheaton 0081 dapter Wrench for installation. Model No. Thread Size dapter Size Weight 0030-124 rass 4 Female NPSM 4 Cam & Groove 7.8 lbs. 5.0 5.5 0089, 0096 Coaxial Tight Fill dapters Emco Wheaton Coaxial Vapor Recovery dapters are designed for standard coaxial fill systems and coaxial systems with self-sealing vapor lines. Features recessed threads for easy installation and positive seating on riser pipes. Model No. Used With Size Weight 0089-001 0088 luminum 4 Female NPSC 3.1 lbs. 0096-001 0070 luminum 4 Female NPSC 3.1 lbs. 4.0 5.5 38
Vapor Caps & dapters 0099 Vapor dapter Cap The Emco Wheaton 0099-002/003 Vapor dapter Cap features a cam system designed for Stage I vapor recovery dual point systems. The cap is made of corrosion resistant orange impregnated material for vapor line identification. Cams are brass; links are stainless steel. Seal is una-n. The Emco Wheaton 0099-333/334 Vapor dapter Cap is a lockable lever action cam & groove type cap for 3 dual point vapor recovery systems. Orange color coded aluminum body with brass lever and una-n seal. The 0099-003 and -334 include a 12 chain to prevent loss or theft. Model No. Size Weight 0099-002 Orange P.E.T. 4 Cam & Groove 1.0 lb. 0099-003 Orange P.E.T. 4 Cam & Groove 1.0 lb. 0099-333 luminum 3 Cam & Groove 0.8 lb. 0099-334 luminum 3 Cam & Groove 0.8 lb. 0076 Vapor dapter The Emco Wheaton 0076 Vapor dapter is used in dual point fill systems on the vapor return line. It features a poppet design which seals off the vapor path, external lugs on the adapter body for easy installation, and a una-n gasket. The 0076 uses the 0099 Vapor Cap. Model No. Thread Size dapter Size Weight 0076-002 lum 3 Female NPSM 4 Cam & Groove 2.1 lbs. 4.7 5.6 0076-005 lum 4 Female NPSM 4 Cam & Groove 3.2 lbs. 4.9 5.6 0076-006 rass 4 Female NPSM 4 Cam & Groove 7.0 lbs. 4.9 5.6 0076-009 lum 3 Female SPP 4 Cam & Groove 2.1 lbs. 4.7 5.6 0076-010 lum 4 Female SPP 4 Cam & Groove 3.2 lbs. 4.9 5.6 0076-124 Vapor Swivel dapter 2.5 0099-333 The Emco Wheaton 0076-124 Vapor dapter Swivel incorporates all the features of the 0076. The swivel feature prevents accidental loosening of threads. The 0076-124 is field serviceable; use o-ring kit 493995. Use the Emco Wheaton 0081 dapter Wrench for installation. 4.8 2.0 0099-002 6.6 4.8 VLVES & FITTINGS Model No. Thread Size dapter Size Weight 0076-124 rass 4 Female 4 Cam & Groove 8.0 lbs. 5.5 0076 Vapor dapter The Emco Wheaton 0076-008 Vapor dapter is used in dual point fill systems on 3 vapor return lines. It features a poppet design which seals off the vapor path and a una-n gasket. Uses the 0099-333 Vapor Cap. Model No. Thread Size dapter Size Weight 0076-008 luminum 3 Female SPPs 3 Cam & Groove 3.8 lbs. 7.4 5.1 39
Suction System Components 0438 Foot Valve One Poppet The Emco Wheaton 0438 Foot Valve, with a single poppet design, is used in suction pump lines. It features all brass parts and flat seat and disc construction and uses a #8 mesh screen to filter out fuel line contaminants. Heavy-duty hex at the valve top facilitates installation. Model No. Outlet Weight 0438-005 rass 1 1 /2" Female 2.1 lbs. 2.8 4.2 0438-105 rass 1 1 /2" Female SP 2.1 lbs. 2.8 4.2 0438-200 rass 2" Female 4.1 lbs. 3.4 5.0 0438-201 rass 2" Female SP 4.1 lbs. 3.4 5.0 0439 Foot Valve Two Poppets The Emco Wheaton 0439 Foot Valve has the same proven features as the 0438, but features a double poppet design for added protection and increased service life. Model No. Outlet Weight 0439-005 rass 1 1 /2" Female 3.1 lbs. 2.8 5.8 0439-105 rass 1 1 /2" Female SP 3.1 lbs. 2.8 5.8 0439-200 rass 2" Female 5.8 lbs. 3.4 7.1 0439-201 rass 2" Female SP 5.8 lbs. 3.4 7.1 0454 ngle Check Valve One Poppet The Emco Wheaton 0454 is a single poppet angle check valve installed on suction pump lines. The 0454 features brass seat and disc. Model No. Inlet Outlet Weight 0454-001 Cast Iron 1 1 /2" Female 1 1 /2" Female 4.2 lbs. 3.9 4.6 0454-151 Cast Iron 1 1 /2" F SP 1 1 /2" F SP 4.2 lbs. 3.9 4.6 0454-200 Cast Iron 2" Female 2" Female 7.5 lbs. 4.9 5.7 0454-201 Cast Iron 2" F SP 2" F SP 7.5 lbs. 4.9 5.7 0464 ngle Check Valve Two Poppets The Emco Wheaton 0464 ngle Check Valve has the same features as the 0454, but features a double poppet design. Model No. Inlet Outlet Weight 0464-001 Cast Iron 1 1 /2" Female 1 1 /2" Female 9.3 lbs. 5.3 5.4 0464-101 Cast Iron 1 1 /2" F SP 1 1 /2" F SP 9.3 lbs. 5.3 5.4 40
Suction System Components 0732 Underpump Union Check Valve The Emco Wheaton 0732 Union Check Valve is inserted into a standard 1 1 /2 union to stop the loss of prime. ody is plastic; all other components are brass. The 0732-002 includes screen. Model No. Size Weight 0732-001 1 1 /2" 0.4 lbs. 2.3 2.7 0732-002 1 1 /2" 0.4 lbs. 2.3 2.7 Shown as installed in union coupling 0850 Vertical Check Valve One Poppet Side ccess The Emco Wheaton 0850 is a single poppet vertical check valve installed on suction pump lines. Features brass disc and seat. Side plate access allows for inspection and replacement of components without disconnecting piping. Model No. Inlet Outlet Weight 0850-001 Cast Iron 1 1 /2" Female 1 1 /2" Female 7.8 lbs. 0850-101 Cast Iron 1 1 /2" F SP 1 1 /2" F SP 7.8 lbs. 0855 Vertical Check Valve 5.0 4.4 VLVES & FITTINGS The Emco Wheaton 0855 is a vertical check valve installed on suction pump lines. The 0855 features brass disc and seat and is available in either single or double poppet. Model No. Inlet Outlet Weight Poppet 0855-001 rass 1 1 /2" F 1 1 /2" F 2.3 lbs. 2.6 4.0 Single 0855-101 rass 1 1 /2" F SP 1 1 /2" F SP 2.3 lbs. 2.6 4.0 Single 0855-002 rass 1 1 /2" F 1 1 /2" F 3.3 lbs. 2.6 5.7 Double 0855-102 rass 1 1 /2" F SP 1 1 /2" F SP 3.3 lbs. 2.6 5.7 Double 0893 Vertical Check Valve One Poppet The Emco Wheaton 0893 is a vertical check valve with a removable cage. The 0893 features a single self-sealing poppet. 5.3 Model No. Inlet Outlet Weight 0893-101 rass 1 1 /2" Female SPT 1 1 /2" Female SPT 4.3 lbs. 5.3 41
Tools/Sealants 0560 Extractor Wrench Emco Wheaton Extractor Wrenches are required to install and remove the 0584 and 0585 pipe caps and appropriate angle check, foot, and float valve extractor cages. Two head styles are available - the historic Emco Wheaton uckeye style wrench and the 0560-003, industry standard bar style wrench. Extractor Model No. Size Weight Pipe Cap Extractor Fitting 0560-001 uckeye 1 1 ¼2 8 lbs. 0677-003 0560-002 uckeye 2 8 lbs. 0584-003 0563-002, -004 0560-003 ar Style 2 8 lbs. 0585-003 0079 0081 dapter Wrench The 0081 dapter is a specially designed tool for installing Emco Wheaton fill adapters. Octagonal bottom and tee handles assure tight positive seating of the fitting. Model No. Weight Used On 0081-001 Steel 10 lbs. 0030-014, -024, -104, -124, 0076-124, 0089, 0096 Z0838 nti-seize Joint Seal Emco Wheaton nti-seize Joint Seal is recognized as one of the most versatile compounds available for its excellent sealing properties. Perfectly suited for threaded connections of virtually any material, including aluminum to aluminum. Provides leakproof sealing for gasoline, oil and water line systems. Z0838 Joint Seal has a high viscosity which it retains throughout years of use without cracking or setting. Resistant to heat, cold and vibration. UL listed. Model No. Size Weight Z0838-005 1 ¼2 pint 1 lb. 42