CD 300SR new! CD 300 NEW Polypropylene Cover and Frame! NEW Polypropylene Cover and Frame! ISSUE 4 CLARK-DRAIN THE Perfect fit! new! CLKS 422 Slide and Snap Locking INSIDE THIS ISSUE Page Carrying Capacities 3, 18 Solid Top Covers 4, 5, 10, 11, 12, 14, 19 Recessed Block Pavior 6, 7, 8, 19 Recessed Screed Covers 2, 8, 9, 19 CLKS 499 Reducer 13 Iron Manhole & Gully Gratings 14, 15 Channels 16, 17 Tailor-made Steel Products 19 Questions and Answers Back page THE UK S NUMBER ONE
If you need more technical information. Please call our dedicated sales team on 01733 765317 or email sales@clark-drain.com The name you can trust! CLARK-DRAIN LIMITED STATION ROAD, YAXLEY, PETERBOROUGH PE7 3EQ TELEPHONE: 01733 765317 FAX: 01733 246923 email: sales@clark-drain.com www.clark-drain.com DUE TO OUR CONTINUAL DEVELOPMENT PROGRAM WE RESERVE THE RIGHT TO UPGRADE PRODUCTS WITHOUT PRIOR NOTICE. PRODUCTS MUST BE FITTED IN ACCORDANCE WITH CLARK-DRAIN INSTALLATION GUIDES. QUESTIONS I M INSTALLING A 450MM MANHOLE COVER OVER AN INSPECTION CHAMBER AND THE DEPTH IS OVER 1.2M, WHAT SHALL I DO? Use the CLKS 499 Reducer, this fits on all our 450mm dia polypropylene covers and will reduce the opening to 350mm to comply with the Building Regulations. WE HAVE A BROKEN COVER DO YOU DO A 26 X 20 MANHOLE COVER? DO YOU DO A 650MM X 550MM COVER? All manhole covers and frames are measured by the clear opening, as this is the only true constant between manufacturer s designs. The above covers will be a 600mm x 450mm (24 x 18 approx) clear opening cover. DID YOU KNOW WE GET 5 CALLS A DAY EACH ASKING THIS QUESTION? SAVE YOUR TIME AND OURS AND SUPPLY FROM STOCK. I M FITTING A 450MM INSPECTION CHAMBER COVER IN MY DRIVEWAY AND MY GARDEN AND DO NOT KNOW WHICH ONE TO USE, CAN YOU ADVISE? You should use the CLKS 452 Polypropylene cover which complies with Doc H of the Building Regulations 2002. OUR 2 TONNE FORKLIFT HAS JUST BROKEN A 10 TONNE GPW STEEL MANHOLE COVER. WHY HAS THIS HAPPENED? Forklifts have smaller diameter tyres and a smaller contact area than standard road going vehicles. Calculations show that they apply at least 4 times the load of a 10 Tonne lorry plus extra dynamic forces due to solid tyres, little suspension etc. Clark-Drain recommends the use of our forklift loading covers for use in typical forklift loading areas. (Please see page 3 for Specification Guidelines and Page 5 for Forklift covers) CLARK-DRAIN PRODUCTS AVAILABLE FROM THE COMPLETE SERVICE 5002 1106
CLARK-DRAIN LIMITED Clark-Drain Ltd are leaders in their field, with over 40 years experience. Working closely with NHBC, Building Control Officers, Local Authorities and Contractors, we have recently raised standards to new heights, particularly with regard to Health and Safety matters (Child Safety especially). INTRODUCTION NEW AND IMPROVED RECESSED SERIES WITH POLYPROPYLENE FRAMES Ever since the launch of this range, we have experienced very positive feedback from our customer base, congratulating us on another positive step. Obviously, before we would change any of our designs, a thorough and extensive market research program is followed, where we speak with as many contacts within the supply chain as possible, and we make every effort to supply an environmentally friendly product. THE ADVANTAGES OF THE NEW RECESSED SERIES 1 Frame manufactured from recycled material and fully recyclable 2 Moulded grouting flange 3 Improved handling characteristics 4 Improved aesthetics 5 Easier removal of lid from frame, especially after some service time (grit jamming etc.) 6 One piece pressed cover - extra strength with reduced weight 7 Keyhole protecting caps included with integral lifting keys 8 Guaranteed interchangeability FOR YOUR CONVENIENCE WE HAVE HIGHLIGHTED SUGGESTED CORE PRODUCTS FOR YOUR COMPANY. These are the most popular products sold within the industry. - England and Wales - Scotland 2 INTRODUCTION www.clark-drain.com sales@clark-drain.com
CARRYING CAPACITIES SUGGESTED SUITABLE CARRYING CAPACITIES FOR CLARK-DRAIN STEEL COVERS AND FRAMES IMPORTANT: We can assist you technically, with any of your specifications. CLARK-DRAIN REF. A GROSS PLATED WEIGHT 2.5 TONNE For pedestrian use only. CLARK-DRAIN REF. B GROSS PLATED WEIGHT 5 TONNE Will support a slow moving wheel load of 1.25 tonnes. Especially recommended for domestic driveway applications. CLARK-DRAIN REF. C GROSS PLATED WEIGHT 10 TONNE Will support a slow moving wheel load of 2.5 tonnes. Restricted access and service areas. CLARK-DRAIN REF. D GROSS PLATED WEIGHT 17 TONNE Will support a slow moving wheel load of 4.25 tonnes. Small rigid commercial vehicles. CLARK-DRAIN REF. E GROSS PLATED WEIGHT 25 TONNE Will support a slow moving wheel load of 6.25 tonnes. Pedestrian precincts, commercial delivery access and emergency services. CLARK-DRAIN REF. F GROSS PLATED WEIGHT 38 TONNE Will support a slow moving wheel load of 9.5 tonnes. Petrol forecourt and articulated lorries. Other traffic Clark-Drain must be notified if inspection covers ordered are to carry vehicles with non pneumatic tyres eg. Forklifts, mobile cranes, short wheel trollies etc. Plus aircraft or any abnormal traffic. www.clark-drain.com sales@clark-drain.com CARRYING CAPACITIES 3
STANDARD GALVANISED STEEL COMPLETE WITH POLYPROPYLENE FRAMES SOLID TOP ACCESS COVERS PRODUCT CLEAR OVERALL OVERALL CODE OPENING (mm) SIZE (mm) DEPTH ( mm) PEDESTRIAN 5 TONNE GPW PC2AG 300 x 300 363 x 363 23 PC5AG 450 x 450 513 x 513 23 PC6AG 600 x 450 663 x 663 23 PC2BG 300 x 300 363 x 363 23 PC5BG 450 x 450 513 x 513 23 PC6BG 600 x 450 663 x 513 23 PC7BG 600 x 600 663 x 663 23 10 TONNE GPW 17 TONNE GPW 25 TONNE GPW PC2CG 300 x 300 363 x 363 23 PC5CG 450 x 450 513 x 513 23 PC6CG 600 x 450 663 x 513 23 PC7CG 600 x 600 663 x 663 23 PC5DG 450 x 450 513 x 513 23 PC6DG 600 x 450 663 x 513 23 PC7DG 600 x 600 663 x 663 23 PC5EG 450 x 450 513 x 513 23 PC6EG 600 x 450 663 x 513 23 - England and Wales - Scotland For all tailor-made SEALED AND LOCKING COVERS AND FRAMES please call 01733 765317 for details and availability. Please contact Clark-Drain for advice should you require units slightly over the specifications above. Gross vehicle plated weight expressed as the gross weight of road vehicles with pneumatic tyres and four points of road contact. LOADS TO FACTA CLASSES CAN BE SUPPLIED ON REQUEST. See page 18 for FACTA Guide. THESE PRODUCTS ARE SUPPLIED SEALED AND LOCKING AS STANDARD PRODUCT CLEAR OVERALL OVERALL CODE OPENING (mm) SIZE (mm) DEPTH ( mm) PEDESTRIAN 5 TONNE GPW 10 TONNE GPW PC5AG3 450 x 450 513 x 513 23 PC5BG3 450 x 450 513 x 513 23 PC6BG3 600 x 450 663 x 513 23 PC6CG3 600 x 450 663 x 513 23 PC7CG3 600 x 600 663 x 663 23 4 SOLID TOP ACCESS COVERS www.clark-drain.com sales@clark-drain.com
SOLID TOP ACCESS COVERS SUPERIOR CHEQUER CLEAR OVERALL PRESSED PLATE PRESSED OPENING SIZE DEPTH CODE CODE (mm) (mm) (mm) 5 TONNE GPW 17 TONNE GPW 38 TONNE GPW SPC2BG N/A 300 x 300 363 x 363 40 SPC5BG N/A 450 x 450 513 x 513 40 SPC6BG N/A 600 x 450 663 x 513 40 SPC7BG N/A 600 x 600 663 x 663 40 C9BG* 750 x 600 813 x 663 40 C11BG* 900 x 600 963 x 663 40 SPC2DG N/A 300 x 300 363 x 363 40 SPC5DG N/A 450 x 450 513 x 513 40 SPC6DG N/A 600 x 450 663 x 513 40 SPC7DG N/A 600 x 600 663 x 663 40 N/A C9DG* 750 x 600 813 x 663 65 C11DG* 900 x 600 963 x 663 65 N/A C2FG* 300 x 300 360 x 360 40 N/A C5FG* 450 x 450 510 x 510 40 N/A C6FG* 600 x 450 660 x 510 40 N/A C7FG* 600 x 600 660 x 660 65 N/A C9FG* 750 x 600 810 x 660 65 N/A C11FG* 900 x 600 960 x 660 65 EXTRA HEAVY DUTY 40 TONNE GPW N/A C2G* 300 x 300 375 x 375 65 N/A C5G* 450 x 450 525 x 525 65 N/A C6G* 600 x 450 675 x 525 65 N/A C7G* 600 x 600 675 x 675 65 N/A C9G* 750 x 600 825 x 675 65 N/A C11G* 900 x 600 995 x 675 65 *Supplied with steel frames DO NOT USE STEEL MANHOLE COVERS AND FRAMES ON HIGHWAYS. SUPERIOR PRESSED COVER (SPC RANGE) CHEQUER PLATE COVER (C RANGE) - England and Wales - Scotland For Forklift areas please use Clark-Drain s range of forklift covers. Please contact Clark-Drain for advice should you require units slightly over the specifications above. Gross vehicle plated weight expressed as the gross weight of road vehicles with pneumatic tyres and four points of road contact. Deep Section Solid Top Access Covers are now supplied with polypropylene frame except where stated otherwise*. LOADS TO FACTA CLASSES CAN BE SUPPLIED ON REQUEST. See page 18 for FACTA Guide. www.clark-drain.com sales@clark-drain.com SOLID TOP ACCESS COVERS 5
CLARK-DRAIN S REVOLUTIONARY SQUARE-TO-ROUND RECESSED COVER Quick and easy to install Cover can be turned to match direction of paving Circular opening in frame fits all major PPIC inspection chambers Eliminates the need to cut paving round a circular opening Guaranteed interchangeability Galvanised to BS EN 1461 Integral lifting keys TEL: 01733 765317 FAX: 01733 246923 SQUARE TO ROUND ACCESS COVERS FOR 450MM INSPECTION CHAMBERS Block Cover APPLICATION For the last 15 years all newly built houses have had circular plastic inspection chambers installed. The CLKS 450 SR enables the frame to be easily connected to the top of the circular chamber. To be supplied where new block paving is being installed and PPIC inspection chambers are being used. new! Frame Standard 450mm dia PPIC chamber As used by Marshalls approved landscape contractors and driveway installers. 6 SQUARE TO ROUND ACCESS COVER www.clark-drain.com sales@clark-drain.com
RECESSED BLOCK PAVIOR Are you stocking the correct block pavior covers? The CLKS 450SR is a must for every merchant! THE UK S NO.1 BLOCK PAVIOR MANHOLE COVER AND FRAME 38T GPW BLOCK PAVIORS NOW AVAILABLE 600 x 600 x 100mm 750 x 600 x 100mm 750 x 750 x 100mm 900 x 600 x 100mm 900 x 900 x 100mm - England and Wales - Scotland Now supplied with integral lifting keys Sealed and locking, can be supplied on request PLASTIC FRAME THE NEXT GENERATION! PRODUCT CLEAR OPENING DEPTH OVERALL SIZE LOADING GPW CODE (mm) (mm) (mm) CLKS 450SR 450 80 580 x 580 x 93 10T GPW * CLKS 450SR/46SL 450 46 580 x 580 x 55 10T GPW 6TH GENERATION RECESSED BLOCK PAVIOR MANHOLE COVER AND FRAME APPLICATION Primarily for renovation and replacement of manhole covers on properties that are generally over 15 years old. PRODUCT CODE CLEAR OPENING SIZE (mm) OVERALL SIZE (mm) LOADING GPW CLKS 790R 600 x 450 x 80 740 x 590 x 98 10T GPW CLKS 791R 600 x 600 x 80 740 x 740 x 98 10T GPW CLKS 790R/100 600 x 450 x 100 700 x 550 x 105 10T GPW CLKS 791R/100 600 x 600 x 100 700 x 700 x 105 10T GPW CLKS 790R/46 600 x 450 x 46 740 x 590 x 55 10T GPW CLKS 793R 750 x 600 x 80 850 x 700 x 105 10T GPW - England and Wales - Scotland Now supplied with integral lifting keys Sealed and locking, can be supplied on request www.clark-drain.com sales@clark-drain.com RECESSED BLOCK PAVIOR 7
RECESS FOR SHALLOW INSPECTION CHAMBER CD 300 SR CLARK-DRAIN S REVOLUTIONARY SQUARE-TO-ROUND RECESSED COVER AND FRAME NEW Polypropylene Cover and Frame! Fits all shallow inspection chambers Block Paving In the last 15 years all newly built houses have had circular plastic inspection chambers installed. Following extensive market research Clark-Drain developed the CD 300 SR which enables the frame to be easily connected to the top of all shallow inspection chambers. More accessible (fits directly on the chamber) Corrosion resistant Aesthetically more pleasing Loading 10T GPW Integral lifting keys Polypropylene cover and frame Quick and easy to install Can be rotated to match direction of paving Circular opening in frame fits all major PPIC shallow inspection chambers Eliminates the need to cut paving around a circular opening Guaranteed interchangeability PRODUCT CODE CLEAR OPENING (mm) DEPTH (mm) LOADING CD 300 SR 300 80 10T GPW Slab Paving Unique to Clark-Drain Concrete Screeding Fully Integral Lifting Keys Massive industry response Patent application Number GB2401641 A As used by Marshalls approved landscape contractors and driveway installers. 8 SHALLOW INSPECTION CHAMBER www.clark-drain.com sales@clark-drain.com
INTERNAL RECESSED MANHOLE COVER AND FRAME THE NEXT GENERATION T RANGE RECESSED MANHOLE COVER AND FRAME T11G3 APPLICATION The light duty tray cover range suits a wide range of applications for both internal and external uses, and is ideal for a variety of floor coverings such as screed, carpet tiles and many more, leaving it virtually invisible to the eye! PRODUCT CODE CLEAR OPENING (mm) OVERALL SIZE (mm) *T1G3 300 x 300 x 46 396 x 396 x 50 *CLKS 450SR/46SL 450 dia x 46 580 x 580 x 55 *T11G3 600 x 450 x 46 740 x 590 x 55 *T16G3 600 x 600 x 46 740 x 740 x 55 - England and Wales FEATURES CODE Sizes available AQK 4545 AQK 6045 AQK 6060 AQK 7560 AQK 7575 AQK 9060 450mm x 450mm 600mm x 450mm 600mm x 600mm 750mm x 600mm 750mm x 750mm 900mm x 600mm Used in the London Boroughs Steel tray and steel frame Galvanised after manufacture to BS EN1461 Neoprene sealing gasket - Scotland Integral lifting keys *Sealed and locking AQUA KNIGHT ASK FOR IT BY NAME FEATURES The T11G3 is supplied with Integral lifting keys One piece pressed cover Extra strength without obstruction Frame manufactured from fully recycled material Moulded grouting flange Fully interchangeable cover Factory fitted neoprene sealing gasket to prevent unwanted odours 4 locking screws with lifting locater caps Galvanised after manufacture to BS EN1461 NEW BRASS EDGE AVAILABLE 450 x 450mm 600 x 450mm 600 x 600mm 750 x 600mm 900 x 600mm Our recessed internal covers can be supplied with BRASS and STAINLESS edging on request AQUA KNIGHT THE UNIQUE RANGE OF GAS AND WATER TIGHT RECESSED ACCESS COVERS AND FRAMES ALL AQUA KNIGHTS ARE SUPPLIED WITH A PAIR OF CLKS 776 KEYS www.clark-drain.com sales@clark-drain.com AQUA KNIGHT RECESSED COVER 9
SOLID TOP ACCESS COVER FOR SHALLOW INSPECTION CHAMBERS TEL: 01733 765317 FAX: 01733 246923 SOLID TOP COVER SUITABLE FOR 300 PPIC INSPECTION CHAMBER new! 4 x lockable screws Fits all inspection chambers 220 300mm CLARK-DRAIN S REVOLUTIONARY SQUARE-TO-ROUND INSPECTION COVER In the last 15 years all newly built houses have had 300mm dia plastic inspection chambers installed. Following extensive market research Clark-Drain developed the CD 300 series which enables the frame to be easily connected to the top of all shallow inspection chambers. Clark-Drain have the solution! More accessible (fits directly on the chamber) Corrosion resistant Driveway loading (35kN) Polypropylene cover and frame Can be rotated Quick and easy to install Circular opening in frame fits all major PPIC shallow inspection chambers Guaranteed interchangeability PRODUCT CLEAR OPENING OVERALL DEPTH LOADING CODE (mm) (mm) CD 300 220 300 37 35kN FOR 300MM PPIC INSPECTION CHAMBERS GRASS GRAVEL ASPHALT NEW Polypropylene Cover and Frame! 10 SOLID TOP ACCESS COVER www.clark-drain.com sales@clark-drain.com
SOLID TOP COVER SUITABLE FOR 450 PPIC INSPECTION CHAMBER Clark-Drain have developed probably the industry s most effective and safety conscious polypropylene inspection cover. FULLY COMPLIANT TO PART H OF THE BUILDING REGULATIONS. Building (Amendment) Regulations 2001. Part H which refers to drainage and waste disposal states: Small lightweight access covers will in future have to be secured (eg. with screws) to deter unauthorised access. Lighter to handle More accessible Corrosion resistant Easier to install Driveway tested to 35kN Ideal for asphalt, grass and gravelled areas Suits all major PPIC Access chambers All units are interchangeable Dual locking Polypropylene Cover and Frame Driveway Loading GRASS GRAVEL PRODUCT CLEAR OPENING OVERALL DEPTH LOADING CODE (mm) (mm) CLKS 451 450 dia 55 35kN SHALLOW INSPECTION COVERS ASPHALT FOR 450MM PPIC INSPECTION CHAMBERS www.clark-drain.com sales@clark-drain.com SOLID TOP ACCESS COVER 11
FRAME TO CHAMBER SECURED SECURING LID TO FRAME FINISHED ARTICLE DUAL LOCKING POLYPROPYLENE COVER AND FRAME TEL: 01733 765317 FAX: 01733 246923 450MM DIAMETER INSPECTION CHAMBER STOP USING THE CAST IRON A15 WE HAVE A SUPERIOR PRODUCT. THE CLKS 452! CLARK-DRAIN 452 SAFETY FIRST AND FOREMOST DO YOU KNOW THE NEW BUILDING REGULATIONS? From the 1st April 2002 the new Building (Amendment) Regulations 2001, together with the new Approved Document Part H came into force. Part H which refers to drainage and waste disposal states: Small lightweight access covers will in future have to be secured (for example with screws) to deter unauthorised access. Clark-Drain have been working with the NHBC and LABC and have recently been awarded the LANTAC approval (Certificate No.228/9/7067) for probably the industry s most effective safety conscious polypropylene inspection cover. 2.54 Document H states: Small lightweight access covers should be secured (for example with screws) to deter unauthorised access (for example by children). 1.24 Septic Tanks: The access should be lockable or otherwise engineered to prevent personnel access. Clark-Drain have been working with the end user and have developed probably the industry s most effective and safety conscious polypropylene inspection cover FULLY COMPLIANT TO PART H OF THE BUILDING REGULATIONS Environmentally friendly polypropylene covers and frames with a test load of 35kN suitable for Driveway loading Suits all major PPIC access chambers All units are interchangeable Dual locking polypropylene cover and frame Certificate Number: 228/9/7067 PRODUCT CLEAR DEPTH LOADING CODE OPENING SIZE (mm) (mm) CLKS 452 450 dia 50 35kN 12 CLKS 452 www.clark-drain.com sales@clark-drain.com
ARE YOU USING THE CLKS 499 REDUCER? INTRODUCING THE CLKS 499 REDUCER BUILDING REGULATIONS PART H STATES: No person shall enter a confined space to carry out work for any purpose unless it is not reasonably practicable to achieve that purpose without such entry. This solution has been updated so that it incorporates The Confined Spaces Regulations 1997 A Reduced Access Inspection Chamber is an inspection chamber where the opening has been reduced to a maximum of 350mm to prevent man entry. Inspection and maintenance operations are all carried out by remotely operated equipment. The maximum depth is usually limited to 3.0m. Access is only permitted when there is no other alternative solution. If you have an inspection chamber deeper than 1.2m regulations call for the clear opening to be reduced to 350mm. Our solution is the Clark-Drain CLKS 499 REDUCER! Regulation 350mm opening Certificate Number: 271/9/7091 Snap lock system Fully compliant to part H of the building regulations One multi-application ring for driveways and pedestrian areas saving time money and confusion Lightweight enough for manual handling compliance Major step forward in child safety LABC fully support the development of the CLKS 499 Reducer system INSERTING THE CLKS 499 REDUCER If you re selling Deep Access Chambers don t forget to stock the REDUCER! www.clark-drain.com sales@clark-drain.com CLKS 499 REDUCER 13
IRON MANHOLE COVERS D400 MANHOLE COVER HEAVY DUTY Heavy duty double triangular manhole cover and frame to BS EN 124 Manufactured in ductile iron Black bitumen coated Non-rock design Closed keyways Optional SW or FW is available PRODUCT CODE BS-EN 124 REF CLEAR OPENING (mm) OVERALL SIZE (mm) DEPTH (mm) CLKS 756 KMD D400 600 x 450 750 x 600 100 CLKS 701H KMD D400 600 x 600 739 x 739 100 CLKS 701AH KMD D400 600 x 600 739 x 739 150 CLKS 1659H KMD D400 675 x 675 798 x 798 100 CLKS 1659AH KMD D400 675 x 675 798 x 798 150 CLKS 693H KMD D400 1200 x 675 1350 x 825 100 CLKS 693AH KMD D400 1200 x 675 1350 x 825 150 B125 MANHOLE COVER MEDIUM DUTY Medium duty solid top manhole cover and frame to BS EN 124 Manufactured in ductile iron Black bitumen coated Single seal Closed keyways PRODUCT CODE BS-EN 124 REF CLEAR OPENING (mm) OVERALL SIZE (mm) DEPTH (mm) CLKS 762 KMB B125 600 x 450 700 x 550 40 CLKS 777 KMB B125 600 x 600 700 x 700 50 CLKS 778 KMB B125 600 x 600 700 x 700 75 CLKS 759 KMB B125 600 dia 720 x 720 50 A15 MANHOLE COVER LIGHT DUTY Light duty, solid top manhole cover and frame to BS EN 124 Manufactured in grey iron Black bitumen coated Single seal Closed keyways PRODUCT CODE BS-EN 124 REF CLEAR OPENING (mm) OVERALL SIZE (mm) DEPTH (mm) CLKS 62 ENA A15 600 x 450 670 x 520 32 CLKS 12 ENA A15 600 x 600 670 x 670 32 - England and Wales - Scotland 14 IRON MANHOLE COVERS www.clark-drain.com sales@clark-drain.com
IRON GULLY GRATINGS GULLY GRATE DOUBLE TRIANGULAR PRODUCT CODE BS-EN 124 REF CLEAR OPENING (mm) OVERALL SIZE (mm) DEPTH (mm) CLKS 644 KMD D400 415 x 415 570 x 504 100 CLKS 502 KMD D400 440 x 400 550 x 526 100 CLKS 732 KMD D400 600 x 600 750 x 750 100 GULLY GRATE CAPTIVE HINGED PRODUCT CODE BS-EN 124 REF CLEAR OPENING (mm) OVERALL SIZE (mm) DEPTH (mm) CLKS 180 KMD D400 430 x 370 580 x 456 100 CLKS 179 KMD D400 510 x 360 660 x 446 100 CLKS 127 KMC C250 440 x 335 526 x 485 75 CLKS 128 KMC C250 336 x 308 483 x 390 75 CLKS 185 KMD* D400 450 x 450 590 x 530 100 (slotted grating) CLKS 231 KMD D400 430 x 370 580 x 456 100 (mesh grating) CLKS 232 KMC C250 336 x 308 390 x 483 100 (mesh grating) CLKS 60DDI B125 300 x 300 400 x 360 75 CLKS 61 B125 225 x 225 280 x 280 62 * The CLKS 185KMD is reversible. ANCILLARY ITEMS PRODUCT CODE CLKS 52L CLKS 552 CLKS 556 CLKS 776 DESCRIPTION Lockable stop tap box Pair of heavy duty lifting keys Pair of light duty Polypropylene lifting keys Pair of recessed Polypropylene lifting keys CLKS 880 POLYPROPYLENE STOP TAP BOX Tested to 1 tonne loading Size is 140 x 115 x 75mm Conforms to BS5834 part 2 B1H Won t rust Aesthetically pleasing Lightweight and easy to handle Produced with fully recyclable plastics NEW www.clark-drain.com sales@clark-drain.com IRON GULLY GRATINGS 15
The Clark-Drain next generation of the CLKS 400 Series drainage system incorporates many unique features. The channel is supplied with a snaplocking grating, the channel itself has male/female slide connections with an additional springlock incorporated. This channel is designed to aid ease of installation, so several lengths can be laid at one time. The depth of the channel is 135mm which ensures sufficient intake of water collection in almost all scenarios. DOMESTIC CHANNELS CLARK-DRAINS RANGE OF POLYPROPYLENE CHANNEL DRAINAGE PRODUCTS, THE UK S NO1 The Next Generation T H E complete CHANNEL LOADING A15 MALE AND FEMALE END CAPS CLKS 402 CLKS 403 SLIDE AND SNAP-LOCKING CONNECTION ENDS! PRODUCT CODE DESCRIPTION LENGTH (mm) DEPTH (mm) CLKS 422/96 Polypropylene Channel c/w plastic grating 1000 135 CLKS 425/96 Polypropylene Channel c/w galvanised Grating 1000 135 CLKS 402 Polypropylene Outlet/Plain End Caps (Packs of 15 pairs) CLKS 403 Polypropylene Debris/Leaf Trap (Packs of 25) 16 CHANNELS www.clark-drain.com sales@clark-drain.com
COMMERCIAL CHANNELS CD CS10 SERIES LIGHT DUTY POLYMER CONCRETE DOMESTIC CHANNEL AND GRATING. A15 1.5 TONNE PRODUCT CODE DESCRIPTION LENGTH (mm) CD CS10.10 Channel Clark-Self 100 with a galvanised self locking grating 1000 CD CS10.12 Silt-box c/w Grating and basket 500 CD CS10.31 Plain End Cap CD CS10.30 Outlet End Cap CD SE 10 SERIES MEDIUM DUTY Galvanised steel edged polymer concrete channel c/w Class C250kN ductile iron slotted heelguard grating. C250 25 TONNE PRODUCT CODE DESCRIPTION LENGTH (mm) CD SD26.L00 Constant Depth Channel 1000 c/w Grating CD SE10.SB Silt-box and basket 500 CD C010.26 Grating 500 CD LM10.00 Locking Bar CD SE10.E20 Plain End Cap CD SE10.0U00 Outlet End Cap CD CE10 SERIES HEAVY DUTY Ductile iron edged channel complete with slotted F900kN grating. PRODUCT CODE DESCRIPTION LENGTH (mm) CD CE10.L00 Constant Depth Channel 1000mm c/w Grating CD CE10.SB Silt-Box 500mm c/w Grating and basket CD SE10.E20 Plain End Cap CD SE10.0U00 Outlet End Cap F900 90 TONNE www.clark-drain.com sales@clark-drain.com CHANNELS 17
STEEL ACCESS COVERS AND FRAMES ENGINEERED STEEL ACCESS COVERS AND FRAMES Our fabrication facility employs the very latest in CNC and robotic manufacturing methods to ensure the lowest production costs and accurate workmanship. Our products are assessed for behavioural characteristics when subject to their intended loading scenario. Employing the latest in FEA (finite elemental analysis) and draughting software ensures both optimum design and accuracy. FACTA GUIDE TO PERFORMANCE CLASSES FOR FABRICATED ACCESS COVERS COMPARISONS GLV WHEEL LOADS LOAD TEST DATA INSTALLATION GUIDE EN 124 Class BS 497 Approx equiv. Class Gross laden vehicle weight (Slow moving) Gross laden vehicle weight (Fast moving) Wheel load (Slow moving) Wheel load (Fast moving) Acceptance Test (Static Wheel load plus overload and dynamic effects) Strength Test (Acceptance Test Load plus ultimate safety factor) Installation Areas Examples A A15 C Pedestrian duty 0.5 tonne (5kN) 5 x 1 x 1 = 5kN 5 x 1.6 =8kN Areas which can only be used by pedestrians and pedal cyclists Pedestrian areas Pedal cycle tracks Bridge footways AA 5 tonne 1.5 tonne (15kN) 1.5 x 1.1 x 1.15 = 19kN 19 x 1.6 =31kN Areas permanently inaccessible to vehicles other than private cars Car parking areas Car parking tracks Bridge footways AAA 7.5 and 10 tonne 2.5 tonne (25kN) 25 x 1.1 x 1.15 = 32kN 32 x 1.6 =52kN Non carriageway locations and areas from which vehicles over the stated wheel loading or GLV weight are excluded Restricted access roads Service/Pedestrian areas B B125 B 16, 20, 25 and 38 tonne 5 tonne (50kN) 50 x 1.1 x 1.15 = 63.25kN 63.25 x 1.6 =101kN Footway locations and access areas where slow moving emergency public service and delivery vans have access and may park Pedestrian precincts Commercial delivery access Refuse collection access Forecourt areas Paved parking areas C C250 A Special up to 38 tonne 6.5 tonne (65kN) 5 tonne (50kN) 65 x 1.1 x 1.15 or 50 x 1.1 x 1.5 = 82.25kN 82.25 x 1.6 =132kN Carriageways carrying all classes of (fast-moving) traffic but located within 0.5m of the kerb line and up to 0.2m into the footway All carriageways, but restricted to the stated zones and wheel loading D D400 D Special up to 38 tonne 11 tonne (108kN) 5 tonne (50kN) 108 x 1.1 x 1.15 137.5 x 1.6 or 50 x 1.1 =220kN x 1.5 = 137.5kN Carriageways, hard shoulders and parking areas for all types of fast moving road vehicles All carriageway locations restricted only by wheel loading E E600 Special Special 16 tonne (158kN) 158 x 1.1 x 1.15 = 200kN 200 x 1.6 =320kN Non-carriageway areas imposing high wheel loads Docksides Airports F F900 Special Special 24 tonne (237kN) 237 x 1.1 x 1.15 = 300kN 300 x 1.6 =480kN Areas imposing particularly high wheel loads Aircraft aprons 18 STEEL www.clark-drain.com sales@clark-drain.com
TAILOR MADE ACCESS COVERS AND FRAMES SOLID TOP COVERS F Solid top lift-off. RECESSED COVERS RCB Recessed solid bottom access covers and frames to accept block pavior infill. SOLID TOP COVERS FCW Solid top hinged and spring assisted. PSC The ultimate in operator safety. UPSTANDING COVERS USC The Clark-Drain range of upstanding access covers have been specifically designed with the stringent requirements of the utilities industry in mind. RECESSED COVERS R Recessed solid bottom access covers and frames to accept concrete or screed floor finishes. BLOCK PAVIOR COVER RCT Recessed solid bottom access covers and frames to accept block pavior infill to the telecommunications industry. DUCT FORM DF Pre-formed ducting systems. GRILLE DG Open mesh flooring. HIGH SECURITY/MOD FOR ALL YOUR ENGINEERED STEEL SIZE REQUIREMENTS, TECHNICAL ADVICE OR SITE SURVEY PLEASE RING OUR SALES DEPARTMENT 01733 765317 www.clark-drain.com sales@clark-drain.com STEEL 19