TOTALINE REFRIGERATION CONDENSERS

TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS Totaline s refrigeration condensers are used for refrigeration systems. These condensers are designed for large coolers or freezers. The Totaline fluid cooler is suitable as a secondary heat exchanger. Condensers are available in capacities from 41,000 BTUH to over 3 million BTUH. Dry type fluid coolers from 5 GPM to over 400 GPM. Condenser Features All Totaline refrigeration condensers provide the design flexibility required in replacement, renovation, and new construction. All refrigeration unit condensers feature the following benefits: Fan motors feature permanently lubricated, sealed ball bearings and inherent thermal protection for long life and dependable service Fan guards and motor mounts are welded wire construction for full protection from moving parts. Baked on powder epoxy coating protects from corrosion Aluminum fan blades are statically and dynamically balanced for smooth, vibration-free operation PVC coated wire fan guards with aluminum fans Labeled terminal block for field wiring Modular design allows minimal part inventory and replacement Plated hardware for light weight and corrosion-free assembly Weather resistant control box protects motor wiring Smooth tubes simplify change from CFC and HCFC to HFC refrigerant Exclusive non-metallic supports for friction free coil assembly Dry fluid coolers FXBs Available in single or multi circuits All units are ETL and CSA approved P4377 Dry Fluid Cooler & Heat Reclaim Unit Features Designed with features identical to our air-cooled condensers Options Copper to be copper fin coils available option Various fins spacing 6, 8, 10, 12 fins per inch Wide range of head pressure control from fan cycling methods as well as various flooding control methods to meet your application needs Wide range of control box options Available Types of Protective Coatings Pre-coated epoxy aluminum (Gold color) Blygold (PoluAl) (Aluminum color) Heresite (Baked Phenolic) (Brown Color) General Notes Packing Standard domestic packaging which provides coil protection Optional, full crate Ordering Information NOTE: You must order a control box and condenser/fluid cooler using two separate P/Ns. The two P/Ns must be submitted together as one order. 728

TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS AIR-COOLED CONDENSER, HEAT RECLAIM & DRY-TYPE FLUID COOLER NOMENCLATURE P703 C L D 180 H 9 Totaline Condenser C Condenser H Heat Reclaim F Dry Type Fluid Cooler Unit Voltage (V/Ph/Hz) 2 240/1/60 5 208-240/3/60 8 600/3/60 9 480/3/60 Horsepower (RPM) C 1/4 (825) M 1/2 (1140) L 1 (825) I 1-1/2 (1140) H 1-1/2 (850) Q 1/2 (560) Airflow H Horizontal Airflow D Direct Drive 8 8 Fins Per Inch (FPI) Nominal Condenser THR (Tons) @25 F TD (R-22) LEGEND TD Temperature Difference 729

TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS AIR-COOLED CONDENSER & FLUID COOLER CONTROL PANEL NOMENCLATURE TOTALINE TYPE OF FAN UNIT CONTROL OPTIONS PANEL PANEL ARRANGEMENT VOLTAGE VOLTAGE P 04 24 8 1 ACE 11 = 1 x 1 2 240/1/60 1 120/1/60 12 = 1 x 2 5 208-240/3/60 2 240/1/60 13 = 1 x 3 8 600/3/60 X 24/1/60 14 = 1 x 4 9 480/3/60 N NONE 15 = 1 x 5 22 = 2 x 2 23 = 2 x 3 N NONE 24 = 2 x 4 A MOTOR FUSING (IN PAIR FOR TWO FAN WIDE UNIT) 25 = 2 x 5 B INDIVIDUAL MOTOR FUSING (FOR TWO FAN WIDE UNIT ONLY) 26 = 2 x 6 C SPEED MOTOR CONTROLLER (PRESSURE SENSING) D SPEED MOTOR CONTROLLER (TEMPERATURE SENSING) E NON-FUSED DISCONNECT F FUSED DISCONNECT STANDARD PANELS 01 CONTROL BOX, TERMINAL BLOCK, NO CONTROLS, NO CONTACTORS 02 CONTACTOR(S) WITHOUT CONTROLS 03 CONTACTOR(S), AMBIENT FAN CYCLING 04 CONTACTOR(S), PRESSURE FAN CYCLING (2) 05 CONTACTOR(S), PRESSURE FAN CYCLING, DUAL CIRCUITS (3) 06 CONTACTOR(S), ELECTRONIC AQUASTAT THERMOSTAT CONTROL (1, 2) 07 CONTACTOR(S), ELECTRONIC AQUASTAT THERMOSTAT CONTROL, FIRST STAGE CYCLING (1, 2) 10 CONTACTOR(S), MECHANICAL AQUASTAT THERMOSTAT CONTROL (1, 2) 11 CONTACTOR(S), MECHANICAL AQUASTAT THERMOSTAT CONTROL, FIRST STAGE CYCLING (1, 2) 12 CONTACTOR(S), MOTORS INDIVIDUALLY WIRED, NO CONTROLS (4, 5) 13 SPLIT ELECTRICAL, CONTACTOR(S), ELECTRONIC AQUASTAT THERMOSTAT CONTROL (1,4,5,6) 14 SPLIT ELECTRICAL, CONTACTOR(S), ELECTRONIC AQUASTAT THERMOSTAT CONTROL, FIRST STAGE CYCLING (1,4,5,6) 16 SPLIT ELECTRICAL, CONTACTOR(S), MECHANICAL AQUASTAT THERMOSTAT CONTROL (1,4,5,6) 17 SPLIT ELECTRICAL, CONTACTOR(S), MECHANICAL AQUASTAT THERMOSTAT CONTROL, FIRST STAGE CYCLING (1,4,5,6) 18 SPLIT ELECTRICAL, CONTACTOR(S), AMBIENT FAN CYCLING (4,5,6) 19 SPLIT ELECTRICAL, CONTACTOR(S), PRESSURE FAN CYCLING (3,4,5,6) 20 CONTACTOR(S), AMBIENT FAN CYCLING WITH PRESSURE OVERRIDE (2) 55 SPECIAL CONTROL PANEL SPECIFICATIONS: 1 AVAILABLE ONLY ON FLUID COOLED UNITS 2 AVAILABLE ONLY ON SINGLE CIRCUIT OR TWO CIRCUITS FOR SINGLE CIRCUIT APPLICATION 3 AVAILABLE ONLY ON TWO REFRIGERANT CIRCUITS UNITS 4 AVAILABLE ONLY ON TWO FANS WIDE UNITS 5 FAN MOTORS ARE INDIVIDUALLY WIRED, NOT IN PAIR (OPTION A NOT AVAILABLE) 6 DUAL POWER SUPPLY FOR TWO FANS WIDE UNITS (SUPPLIED WITH TWO ELECTRICAL BOXES) NOTES: 1 FIRST STAGE IS NOT CYCLED, UNLESS OTHERWISE NOTED 2 ON TWO FAN WIDE UNITS, FAN MOTORS ARE WIRED IN PAIRS, UNLESS OTHERWISE NOTED 730

TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS LOW CFM AIR-COOLED CONDENSERS (Standard Fin Spacing) TOTAL HEAT REJECTION MBTUH REFRIGERANT PART (R-22, R-134a) CONNECTION SIZES CAP./CKT FAN CHARGE SHIPPING TEMPERATURE DIFFERENCE (TD) CIRCUITS (in.) Btuh/F TD ARRANGEMENT WEIGHT (CKT) 1 F 15 F 20 F 25 F 30 F Discharge Liquid Summer Winter P703-CCD02 1.38 20.64 27.52 34.40 41.28 4 344 1 X 1 7/8 5/8 1.8 5.8 190 P703-CCD03 1.69 25.39 33.86 42.32 50.79 5 339 1 X 1 7/8 5/8 2.7 8.7 201 P703-CCD04 1.89 28.36 37.82 47.27 56.73 4 473 1 X 1 7/8 7/8 3.5 12 210 P703-CMD05 2.63 39.50 52.67 65.84 79.00 7 376 1 X 1 7/8 7/8 3.3 11 308 P703-CMD07 3.33 49.90 66.53 83.16 99.79 7 475 1 X 1 7/8 7/8 4.9 16 335 P703-CMD08 3.73 55.98 74.65 93.31 111.97 7 533 1 X 1 1-1/8 7/8 6.5 22 350 P703-CMD09 5.27 79.00 105.34 131.67 158.00 13 405 1 X 2 1-1/8 7/8 6.3 21 489 P703-CMD11 5.99 89.84 119.79 149.74 179.69 14 428 1 X 2 1-1/8 1-1/8 9.5 31 518 P703-CMD12 6.65 99.79 133.06 166.32 199.58 14 475 1 X 2 1-1/8 1-1/8 9.5 31 532 P703-CMD13 6.87 103.06 137.41 171.77 206.12 14 491 1 X 2 1-1/8 1-1/8 13 42 544 P703-CMD14 7.46 111.97 149.29 186.62 223.94 14 533 1 X 2 1-3/8 1-1/8 13 42 566 P703-CMD18 8.98 134.69 179.59 224.48 269.38 20 449 1 X 3 1-3/8 1-1/8 14 47 727 P703-CMD20 9.98 149.69 199.58 249.48 299.38 20 499 1 X 3 1-3/8 1-1/8 14 47 741 P703-CMD21 10.31 154.59 206.12 257.65 309.18 27 382 1 X 3 1-3/8 1-1/8 19 62 767 P703-CMD23 11.20 167.95 223.94 279.92 335.91 27 415 1 X 3 1-3/8 1-1/8 19 62 789 P703-CLD009 4.40 65.93 87.91 109.89 131.87 11 400 1 X 1 1-1/8 1-1/8 5.8 19 515 P703-CLD010 5.17 77.52 103.36 129.20 155.03 11 470 1 X 1 1-1/8 1-1/8 5.8 19 525 P703-CLD012 5.77 86.58 115.43 144.29 173.15 17 340 1 X 1 1-1/8 1-1/8 8.8 29 592 P703-CLD013 6.56 98.46 131.27 164.09 196.91 17 386 1 X 1 1-1/8 1-1/8 8.8 29 602 P703-CLD014 6.87 103.06 137.41 171.77 206.12 17 404 1 X 1 1-3/8 1-1/8 12 38 641 P703-CLD015 7.39 110.78 147.71 184.64 221.56 17 434 1 X 1 1-3/8 1-1/8 12 38 654 P703-CLD018 8.78 131.72 175.63 219.53 263.44 17 517 1 X 2 1-3/8 1-1/8 12 38 985 P703-CLD021 10.34 155.03 206.71 258.39 310.07 17 608 1 X 2 1-3/8 1-3/8 12 38 1005 P703-CLD023 11.55 173.30 231.07 288.83 346.60 26 444 1 X 2 1-5/8 1-3/8 17 57 1063 P703-CLD026 13.13 196.91 262.55 328.19 393.82 26 505 1 X 2 1-5/8 1-3/8 17 57 1091 P703-CLD028 13.73 205.97 274.63 343.28 411.94 35 392 1 X 2 1-5/8 1-3/8 23 76 1117 P703-CLD030 14.76 221.41 295.22 369.02 442.83 35 422 1 X 2 1-5/8 1-3/8 23 76 1159 P703-CLD035 17.33 259.88 346.50 433.13 519.75 52 333 1 X 3 1-5/8 1-5/8 26 85 1460 P703-CLD040 19.69 295.37 393.82 492.28 590.73 52 379 1 X 3 2-1/8 1-5/8 26 85 1490 P703-CLD042 20.68 310.22 413.62 517.03 620.43 34 608 2 X 2 (2) 1-3/8 (2) 1-3/8 23 75 1625 P703-CLD043 21.02 315.27 420.35 525.44 630.53 70 300 1 X 3 2-1/8 1-5/8 34 112 1570 P703-CLD045 22.13 331.90 442.53 553.16 663.80 70 316 1 X 3 2-1/8 1-5/8 34 112 1609 P703-CLD049 24.41 366.20 488.27 610.34 732.40 52 469 2 X 2 (2) 1-5/8 (2) 1-3/8 35 115 1792 P703-CLD050 24.41 366.20 488.27 610.34 732.40 52 469 1 X 4 2-1/8 1-5/8 34 112 1875 P703-CLD053 26.25 393.82 525.10 656.37 787.64 52 505 2 X 2 (2) 1-5/8 (2) 1-3/8 35 115 1781 P703-CLD054 26.25 393.82 525.10 656.37 787.64 52 505 1 X 4 2-1/8 1-5/8 34 112 1915 P703-CLD056 28.04 420.55 560.74 700.92 841.10 70 401 2 X 2 (2) 1-5/8 (2) 1-3/8 47 153 1882 P703-CLD057 28.04 420.55 560.74 700.92 841.10 70 401 1 X 4 2-1/8 1-5/8 46 150 2019 P703-CLD060 29.51 442.68 590.24 737.80 885.36 70 422 2 X 2 (2) 1-5/8 (2) 1-3/8 47 153 1934 P703-CLD061 29.51 442.68 590.24 737.80 885.36 70 422 1 X 4 2-1/8 1-5/8 46 150 2071 P703-CLD063 30.67 460.05 613.40 766.76 920.11 70 438 2 X 3 (2) 1-5/8 (2) 1-3/8 34 112 2323 P703-CLD066 32.82 492.28 656.37 820.46 984.56 52 631 1 X 5 2-1/8 2-1/8 43 140 2403 P703-CLD070 35.04 525.54 700.72 875.90 1051.08 70 501 1 X 5 2-1/8 2-1/8 57 187 2475 P703-CLD075 36.88 553.16 737.55 921.94 1106.33 70 527 1 X 5 2-1/8 2-1/8 57 187 2540 P703-CLD080 39.38 590.73 787.64 984.56 1181.47 104 379 2 X 3 (2) 2-1/8 (2) 1-5/8 52 169 2508 P703-CLD085 42.06 630.83 841.10 1051.38 1261.66 140 300 2 X 3 (2) 2-1/8 (2) 1-5/8 69 225 2664 P703-CLD090 44.26 663.94 885.26 1106.57 1327.89 140 316 2 X 3 (2) 2-1/8 (2) 1-5/8 69 225 2742 P703-CLD099 48.84 732.55 976.73 1220.92 1465.10 104 470 2 X 4 (2) 2-1/8 (2) 1-5/8 68 224 3029 P703-CLD106 52.51 787.64 1050.19 1312.74 1575.29 104 505 2 X 4 (2) 2-1/8 (2) 1-5/8 68 224 3129 P703-CLD113 56.06 840.96 1121.27 1401.59 1681.91 140 400 2 X 4 (2) 2-1/8 (2) 1-5/8 91 299 3338 P703-CLD120 59.01 885.21 1180.28 1475.35 1770.42 140 422 2 X 4 (2) 2-1/8 (2) 1-5/8 91 229 3442 P703-CLD124 61.16 917.43 1223.24 1529.06 1834.87 104 588 2 X 5 (2) 2-1/8 (2) 2-1/8 85 280 4198 P703-CLD132 65.65 984.70 1312.94 1641.17 1969.41 104 631 2 X 5 (2) 2-1/8 (2) 2-1/8 85 280 4298 P703-CLD142 70.08 1051.23 1401.64 1752.05 2102.46 140 501 2 X 5 (2) 2-1/8 (2) 2-1/8 114 373 4560 P703-CLD150 73.77 1106.62 1475.50 1844.37 2213.24 140 527 2 X 5 (2) 2-1/8 (2) 2-1/8 114 373 4690 P703-CLD159 78.76 1181.47 1575.29 1969.11 2362.93 86 916 2 X 6 (2) 2-5/8 (2) 2-1/8 164 553 5292 P703-CLD170 84.00 1260.02 1680.03 2100.04 2520.05 116 724 2 X 6 (2) 2-5/8 (2) 2-1/8 218 717 5642 P703-CLD180 88.54 1328.04 1770.71 2213.39 2656.07 116 763 2 X 6 (2) 2-5/8 (2) 2-1/8 218 717 5798 LEGEND TD Temperature Difference NOTES: 1. Multiply capacity by 0.98 for R-404A and R-507. 2. Multiply capacity by 0.92 for 50 Hz units. 3. Connections are based on 30 F TD, 40 F suction and R-22. 4. Refrigerant summer charge is based on 100 F liquid, 30% liquid and 70% vapor. 5. Refrigerant winter charge is based on 20 F liquid, 90% liquid and 10% vapor. 731

TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS LOW CFM AIR-COOLED CONDENSERS (8 FPI) TOTAL HEAT REJECTION MBTUH REFRIGERANT PART (R-22, R-134a) CONNECTION SIZES CAP./CKT FAN CHARGE SHIPPING TEMPERATURE DIFFERENCE (TD) CIRCUITS (in.) Btuh/F TD ARRANGEMENT WEIGHT (CKT) 1 F 15 F 20 F 25 F 30 F Discharge Liquid Summer Winter P703-CL8009 4.49 67.42 89.89 112.37 134.84 11 409 1 X 1 1-1/8 1-1/8 5.8 19 515 P703-CL8012 5.83 87.47 116.62 145.78 174.93 17 343 1 X 1 1-1/8 1-1/8 8.8 29 592 P703-CL8014 6.70 100.53 134.05 167.56 201.07 17 394 1 X 1 1-3/8 1-1/8 12 38 641 P703-CL8018 8.99 134.84 179.78 224.73 269.68 17 529 1 X 2 1-3/8 1-1/8 12 38 985 P703-CL8024 11.66 174.93 233.24 291.56 349.87 26 449 1 X 2 1-5/8 1-3/8 17 57 1063 P703-CL8027 13.40 201.07 268.09 335.12 402.14 35 383 1 X 2 1-5/8 1-3/8 23 76 1117 P703-CL8035 17.49 262.40 349.87 437.33 524.80 52 336 1 X 3 1-5/8 1-5/8 26 85 1460 P703-CL8036 17.98 269.68 359.57 449.46 539.35 34 529 2 X 2 (2) 1-3/8 (2) 1-3/8 23 75 1625 P703-CL8041 20.11 301.60 402.14 502.67 603.21 70 287 1 X 3 2-1/8 1-5/8 34 112 1570 P703-CL8047 23.32 349.87 466.49 583.11 699.73 52 449 2 X 2 (2) 1-5/8 (2) 1-3/8 35 115 1792 P703-CL8048 23.32 349.87 466.49 583.11 699.73 52 449 1 X 4 2-1/8 1-5/8 34 112 1875 P703-CL8053 26.81 402.14 536.18 670.23 804.28 70 383 2 X 2 (2) 1-5/8 (2) 1-3/8 47 153 1882 P703-CL8054 26.81 402.14 536.18 670.23 804.28 70 383 1 X 4 2-1/8 1-5/8 46 150 2019 P703-CL8055 26.97 404.51 539.35 674.19 809.03 70 385 2 X 3 (2) 1-5/8 (2) 1-3/8 34 112 2323 P703-CL8059 29.55 443.27 591.03 738.79 886.55 52 568 1 X 5 2-1/8 2-1/8 43 140 2403 P703-CL8068 33.51 502.67 670.23 837.79 1005.35 70 479 1 X 5 2-1/8 2-1/8 57 187 2475 P703-CL8071 34.99 524.80 699.73 874.67 1049.60 104 336 2 X 3 (2) 2-1/8 (2) 1-5/8 52 169 2508 P703-CL8081 40.21 603.21 804.28 1005.35 1206.41 140 287 2 X 3 (2) 2-1/8 (2) 1-5/8 69 225 2664 P703-CL8094 46.65 699.73 932.98 1166.22 1399.46 104 449 2 X 4 (2) 2-1/8 (2) 1-5/8 68 224 3029 P703-CL8108 53.62 804.28 1072.37 1340.46 1608.55 140 383 2 X 4 (2) 2-1/8 (2) 1-5/8 91 299 3338 P703-CL8118 58.37 875.56 1167.41 1459.26 1751.11 104 561 2 X 5 (2) 2-1/8 (2) 2-1/8 85 280 4198 P703-CL8135 67.04 1005.64 1340.86 1676.07 2011.28 140 479 2 X 5 (2) 2-1/8 (2) 2-1/8 114 373 4560 P703-CL8141 69.97 1049.60 1399.46 1749.33 2099.20 86 814 2 X 6 (2) 2-5/8 (2) 2-1/8 164 553 5292 P703-CL8162 80.43 1206.41 1608.55 2010.69 2412.83 116 693 2 X 6 (2) 2-5/8 (2) 2-1/8 218 717 5642 LEGEND FPI Fins per inch NOTES: 1. Multiply capacity of 0.98 for R-404A and R-507. 2. Multiply capacity by 0.92 for 50 Hz units. 3. Connections are based on 30 F TD, 40 F suction and R-22. 4. Refrigerant summer charge is based on 100 F liquid, 30% liquid and 70% vapor. 5. Refrigerant winter charge is based on 20 F liquid, 90% liquid and 10% vapor. HEAT RECLAIM UNITS TOTAL HEAT REJECTION MBTUH PART (R-22, R-134a) CONNECTION SIZES REFRIGERANT SHIPPING CAP./CKT FAN TEMPERATURE DIFFERENCE (TD) CIRCUITS (in.) CHARGE WEIGHT Btuh/F TD ARRANGEMENT (CKT) 1 F 30 F 35 F 40 F 45 F Discharge Liquid P703-HCD02 1.38 41.28 48.16 55.04 61.92 19 72 1 X 1 1-1/8 1-1/8 0.6 190 P703-HCD03 1.69 50.79 59.25 67.72 76.18 14 121 1 X 1 1-1/8 1-1/8 0.9 201 P703-HCD04 1.89 56.73 66.18 75.64 85.09 19 100 1 X 1 1-1/8 1-1/8 1.2 210 P703-HMD05 2.63 79.00 92.17 105.34 118.50 27 98 1 X 1 1-3/8 1-3/8 1.1 308 P703-HMD07 3.33 99.79 116.42 133.06 149.69 20 166 1 X 1 1-3/8 1-3/8 1.6 335 P703-HMD08 3.73 111.97 130.63 149.29 167.95 27 138 1 X 1 1-3/8 1-3/8 2.1 350 P703-HMD09 5.27 158.00 184.34 210.67 237.01 27 195 1 X 2 1-5/8 1-5/8 2.1 489 P703-HMD11 5.99 179.69 209.63 239.58 269.53 40 150 1 X 2 1-5/8 1-5/8 3.1 518 P703-HMD12 6.65 199.58 232.85 266.11 299.38 40 166 1 X 2 2-1/8 2-1/8 3.1 532 P703-HMD13 6.87 206.12 240.47 274.82 309.18 27 254 1 X 2 2-1/8 2-1/8 4.3 544 P703-HMD14 7.46 223.94 261.26 298.58 335.91 27 276 1 X 2 2-1/8 2-1/8 4.3 566 P703-HMD18 8.98 269.38 314.28 359.17 404.07 40 224 1 X 3 2-1/8 2-1/8 4.6 727 P703-HMD20 9.98 299.38 349.27 399.17 449.06 40 249 1 X 3 2-1/8 2-1/8 4.6 741 P703-HMD21 10.31 309.18 360.71 412.24 463.77 54 191 1 X 3 2-1/8 2-1/8 6.3 767 P703-HMD23 11.20 335.91 391.89 447.88 503.86 54 207 1 X 3 2-1/8 2-1/8 6.3 789 NOTES: 1. Multiply capacity of 0.98 for R-404A and R-507. 2. Multiply capacity by 0.92 for 50 Hz units. 3. Connections sizes are based on 40 F TD at 50% recovery. 4. Refrigerant charge is based on 10% liquid and 90% vapor. 732

TOTALINE REFRIGERATION CONDENSERS P703 AIR-COOLED CONDENSERS AND DRY COOLERS HIGH CFM AIR-COOLED CONDENSERS (Standard Fins) TOTAL HEAT REJECTION MBTUH REFRIGERANT PART (R-22, R-134a) CONNECTION SIZES CAP./CKT FAN CHARGE SHIPPING TEMPERATURE DIFFERENCE (TD) CIRCUITS (in.) Btuh/F TD ARRANGEMENT WEIGHT (CKT) 1 F 15 F 20 F 25 F 30 F Discharge Liquid Summer Winter P703-CID010 5.08 76.18 101.57 126.97 152.36 11 462 1 X 1 1-1/8 1-1/8 5.8 19 515 P703-CID011 5.88 88.21 117.61 147.02 176.42 11 535 1 X 1 1-1/8 1-1/8 5.8 19 525 P703-CID013 6.59 98.90 131.87 164.84 197.80 17 388 1 X 1 1-1/8 1-1/8 8.8 29 592 P703-CID014 7.39 110.78 147.71 184.64 221.56 17 434 1 X 1 1-1/8 1-1/8 8.8 29 602 P703-CID016 7.76 116.42 155.23 194.04 232.85 17 457 1 X 1 1-3/8 1-1/8 12 38 641 P703-CID017 8.27 124.00 165.33 206.66 248.00 17 486 1 X 1 1-3/8 1-1/8 12 38 654 P703-CID020 10.17 152.51 203.35 254.18 305.02 17 598 1 x 2 1-3/8 1-1/8 12 38 985 P703-CID023 11.76 176.42 235.22 294.03 352.84 17 692 1 X 2 1-3/8 1-3/8 12 38 1005 P703-CID025 13.20 197.95 263.93 329.92 395.90 26 508 1 X 2 1-5/8 1-3/8 17 57 1063 P703-CID029 14.78 221.71 295.61 369.52 443.42 26 568 1 X 2 1-5/8 1-3/8 17 57 1091 P703-CID031 15.52 232.85 310.46 388.08 465.70 35 444 1 X 2 1-5/8 1-3/8 23 76 1117 P703-CID034 16.54 248.14 330.86 413.57 496.29 35 473 1 X 2 1-5/8 1-3/8 23 76 1159 P703-CID039 19.79 296.85 395.80 494.75 593.70 52 381 1 X 3 1-5/8 1-5/8 26 85 1460 P703-CID044 22.17 332.49 443.32 554.15 664.98 52 426 1 X 3 2-1/8 1-5/8 26 85 1490 P703-CID046 22.98 344.67 459.56 574.45 689.34 34 676 2 X 2 (2) 1-3/8 (2) 1-3/8 23 75 1625 P703-CID049 23.29 349.42 465.89 582.37 698.84 70 333 1 X 3 2-1/8 1-5/8 34 112 1570 P703-CID051 24.80 371.99 495.99 619.99 743.99 70 354 1 X 3 2-1/8 1-5/8 34 112 1609 P703-CID054 27.48 412.24 549.65 687.06 824.47 52 529 2 X 2 (2) 1-5/8 (2) 1-3/8 35 115 1792 P703-CID055 27.48 412.24 549.65 687.06 824.47 52 529 1 X 4 2-1/8 1-5/8 34 112 1875 P703-CID058 29.54 443.12 590.83 738.54 886.25 52 568 2 X 2 (2) 1-5/8 (2) 1-3/8 35 115 1781 P703-CID059 29.54 443.12 590.83 738.54 886.25 52 568 1 X 4 2-1/8 1-5/8 34 112 1915 P703-CID064 31.06 465.84 621.13 776.41 931.69 70 444 2 X 2 (2) 1-5/8 (2) 1-3/8 47 153 1882 P703-CID065 31.06 465.84 621.13 776.41 931.69 70 444 1 X 4 2-1/8 1-5/8 46 150 2019 P703-CID068 33.08 496.14 661.52 826.90 992.28 70 473 2 X 2 (2) 1-5/8 (2) 1-3/8 47 153 1934 P703-CID069 33.08 496.14 661.52 826.90 992.28 70 473 1 X 4 2-1/8 1-5/8 46 150 2071 P703-CID070 35.28 529.25 705.67 882.09 1058.51 70 504 2 X 3 (2) 1-5/8 (2) 1-3/8 34 112 2323 P703-CID073 36.95 554.20 738.94 923.67 1108.40 52 711 1 X 5 2-1/8 2-1/8 43 140 2403 P703-CID079 38.82 582.27 776.36 970.45 1164.54 70 555 1 X 5 2-1/8 2-1/8 57 187 2475 P703-CID085 41.33 619.99 826.65 1033.31 1239.98 70 590 1 X 5 2-1/8 2-1/8 57 187 2540 P703-CID088 44.31 664.69 886.25 1107.81 1329.37 104 426 2 X 3 (2) 2-1/8 (2) 1-5/8 52 169 2508 P703-CID095 46.57 698.54 931.39 1164.24 1397.09 140 333 2 X 3 (2) 2-1/8 (2) 1-5/8 69 225 2664 P703-CID101 49.62 744.28 992.38 1240.47 1488.56 140 354 2 X 3 (2) 2-1/8 (2) 1-5/8 69 225 2742 P703-CID112 54.96 824.47 1099.30 1374.12 1648.94 104 529 2 X 4 (2) 2-1/8 (2) 1-5/8 68 224 3029 P703-CID119 59.08 886.25 1181.66 1477.08 1772.50 104 568 2 X 4 (2) 2-1/8 (2) 1-5/8 68 224 3129 P703-CID129 62.09 931.39 1241.86 1552.32 1862.78 140 444 2 X 4 (2) 2-1/8 (2) 1-5/8 91 299 3338 P703-CID137 66.14 992.13 1322.84 1653.55 1984.26 140 472 2 X 4 (2) 2-1/8 (2) 1-5/8 91 229 3442 P703-CID141 68.72 1030.74 1374.32 1717.90 2061.48 104 661 2 X 5 (2) 2-1/8 (2) 2-1/8 85 280 4198 P703-CID149 73.87 1108.11 1477.48 1846.85 2216.21 104 710 2 X 5 (2) 2-1/8 (2) 2-1/8 85 280 4298 P703-CID162 77.64 1164.54 1552.72 1940.90 2329.07 140 555 2 X 5 (2) 2-1/8 (2) 2-1/8 114 373 4560 P703-CID171 82.68 1240.27 1653.70 2067.12 2480.54 140 591 2 X 5 (2) 2-1/8 (2) 2-1/8 114 373 4690 P703-CID178 88.64 1329.67 1772.89 2216.12 2659.34 86 1031 2 X 6 (2) 2-5/8 (2) 2-1/8 164 553 5292 P703-CID194 93.14 1397.09 1862.78 2328.48 2794.18 116 803 2 X 6 (2) 2-5/8 (2) 2-1/8 218 717 5642 P703-CID205 99.89 1498.37 1997.82 2497.28 2996.73 116 861 2 X 6 (2) 2-5/8 (2) 2-1/8 218 717 5798 NOTES: 1. Multiply capacity of 0.98 for R-404A and R-507. 2. Multiply capacity by 0.92 for 50 Hz units. 3. Connections sizes are based on 30 F TD, 40 F suction and R-22. 4. Refrigerant summer charge is based on 100 F liquid, 30% liquid and 70% vapor. 5. Refrigerant winter charge is based on 20 F liquid, 90% liquid and 10% vapor. 733

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS Thirteen different models of unit coolers featuring many capacities and types allow flexibility to meet most applications. Standard Features: All Totaline refrigeration coolers provide the design flexibility required in replacement, renovation, and new construction. Unit coolers are available in many models to suit most needs. Low sound levels Heavy duty construction Wide selection of fin spacing available Corrosion resistant fan guards (silver color) Easy access to refrigerant and electrical connections Warranty against material and labor defects UL listed NSF approved Options: Custom coil manufacturing i.e., gravity coils, copper tube/copper fin Custom fin spacing i.e., 3 Fin Per Inch TX valves and solenoid valves Option coil coating available for adverse environments Available Types of Protective Coating: Pre-coated epoxy aluminum (Gold color) Blygold (Polu Al) (Aluminum color) Heresite (Baked Pheonolic) (Brown color) General Note: 240 volt unit can be used for 200-220/1/50. P4378A P4378B P4378D P704 NOMENCLATURE P704 E L A 224 1 1 Totaline Unit Cooler E Evaporator Unit Voltage (V/Ph/Hz) 1 120/1/60 2 240/1/60 5 208-240/3/60 8 600/3/60 9 480/3/60 B Blast Freezer C Compact Reach-In D Dual Flow Reach-In F Free Standing Blast Freezer H High Profile Unit Cooler I Industrial Unit Cooler K Compact Unit Cooler L Low Height Unit Cooler M Medium Profile Unit Cooler P Medium Velocity Unit Cooler S Single Flow Unit Cooler V Low Velocity Unit Cooler W Wall Mount Reach-In A Air Defrost E Electric Defrost G Reverse Cycle Defrost With Electric Heated Drain Pan H Three Pipe Defrost With Electric Heated Drain Pan R Reverse Cycle Hot Gas Defrost T Three Pipe Hot Gas Defrost Product Generation Unit Capacity @10 F TD 22,400 Btuh LEGEND TD Temperature Difference 734

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-ECA SPACE SAVER REACH-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Single coil construction. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Air is discharged through the back of the unit. Ceiling or back wall mounting. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-ECA100-(1) 1000 1500 10-1/4 7-3/4 16-5/8 10.5 P704-ECA130-(1) 1300 1950 10-1/4 7-3/4 16-5/8 11.5 P704-ECA150-(1) 1500 2250 10-1/4 7-3/4 16-5/8 12.5 P4379 P704-EWA MULLION REACH-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Single coil construction. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Up or down airflow. Wall or mullion mounted. Upflow standard configuration can be modified to downflow. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EWA130-(1) 1300 1950 5-3/4 18-1/4 15-3/4 13 P704-EWA180-(1) 1800 2700 5-3/4 18-1/4 15-3/4 14 P704-EWA230-(1) 2300 3450 5-3/4 18-1/4 21-3/4 17 Models ECA and EWA are available in: 1 = 120/1/60 2 = 240/1/60 NOTE: Standard voltage for ECA and EWA is 120/1/60, optional voltage is 240/1/60. P4380 P704-EDA DUAL FLOW REACH-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Dual coil construction for equal air distribution on both sides of the cooler. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, impedance protected, heavy duty fan motors are provided for long life and dependable service. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EDA102-(1) 1000 1500 14-1/8 3-1/2 18-1/8 11.5 P704-EDA132-(1) 1300 1950 14-1/8 3-1/2 18-1/8 12.5 P704-EDA152-(1) 1500 2250 14-1/8 4-1/2 18-1/8 13 P704-EDA182-(1) 1800 2700 14-1/8 4-1/2 18-1/8 14 P704-EDA232-(1) 2300 3450 17-1/8 5-1/2 20-1/8 17 P704-EDA282-(1) 2800 4200 17-1/8 5-1/2 20-1/8 18.5 P704-EDA332-(1) 3300 4950 17-1/8 5-1/2 20-1/8 20 P4381 735

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-ESA SINGLE FLOW REACH-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Single coil construction for air distribution on the back of cooler. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, impedance protected, heavy duty fan motors are provided for long life and dependable service. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-ESA102-(1) 1000 1500 15 4-1/2 17-1/4 9.0 P704-ESA132-(1) 1300 1950 15 4-1/2 17-1/4 10.0 P704-ESA152-(1) 1500 2250 15 4-1/2 21-3/4 11.5 P704-ESA182-(1) 1800 2700 15 4-1/2 25-3/4 13.0 P704-ESA232-(1) 2300 3450 15 4-1/2 33-3/4 17.0 P704-ESA282-(1) 2800 4200 15 4-1/2 33-3/4 18.5 P704-ESA332-(1) 3300 4900 15 5-1/2 33-3/4 20.0 P704-ESA452-(1) 4500 6750 17 5-1/2 43-3/4 27.0 P704-ESE552-(1) 5500 8250 17 5-1/2 43-3/4 32.5 P4382 Models EDA and ESA are available in: 1 = 120/1/60 2 = 240/1/60 NOTE: Standard voltage for EDA and ESA is 120/1/60, optional is 240/1/60. P704-ESE SINGLE FLOW REACH-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 20 TO +34 F Single coil construction for air distribution to back of cooler or freezer. These units are provided with stainless steel low watt density tubular heaters, defrost termination and fan delay thermostat for positive defrost and high efficiency. Heavy gauge textured aluminum casings with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, impedance protected, heavy duty fan motors are provided for long life and dependable service. Electric Defrost P4382 MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 20 F +20 F Depth Height Width WEIGHT (Lbs) P704-ESE102-(1) 850 1000 15 4-1/2 17-1/4 11.0 P704-ESE132-(1) 1105 1300 15 4-1/2 17-1/4 11.5 P704-ESE152-(1) 1275 1500 15 4-1/2 21-3/4 13.5 P704-ESE182-(1) (2) 1530 1800 15 4-1/2 25-3/4 15.5 P704-ESE232-(1) (2) 1955 2300 15 4-1/2 33-3/4 19.5 P704-ESE282-(1) (2) 2380 2800 15 4-1/2 33-3/4 21.0 P704-ESE332-(1) (2) 2805 3300 15 5-1/2 33-3/4 23.0 P704-ESE452-(1) (2) 3825 4500 17 5-1/2 43-3/4 30.5 P704-ESE552-(1) (2) 4675 5500 17 5-1/2 43-3/4 35.5 Model ESE is available in: 1 = 120/1/60 2 = 240/1/60 NOTE: Standard voltage for ESE is 240/1/60, optional voltage is 120/1/60. 736

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-ELA HIGH VELOCITY WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F High velocity/single coil construction for air distribution toward the center of the cooler. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. Air throw is 20 to 30 ft. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Heavy gauge textured aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-ELA0381-(1) 3,800 5,700 11-1/2 13-1/4 31-1/8 35 P704-ELA0491-(1) 4,900 7,350 11-1/2 13-1/4 31-1/8 39 P704-ELA0561-(1) 5,600 8,400 11-1/2 13-1/4 31-1/8 42 P704-ELA0661-(1) 6,600 9,900 11-1/2 13-1/4 43-1/8 52 P704-ELA0831-(1) 8,300 12,450 11-1/2 13-1/4 43-1/8 57 P704-ELA0961-(1) 9,600 14,400 11-1/2 13-1/4 43-1/8 63 P704-ELA1121-(1) 11,200 16,800 11-1/2 13-1/4 51-1/8 96 P704-ELA1471-(1) 14,700 22,050 11-1/2 13-1/4 71-1/8 107 P704-ELA1681-(1) 16,800 25,200 11-1/2 13-1/4 71-1/8 123 P704-ELA1851-(1) 18,500 27,750 11-1/2 13-1/4 71-1/8 138 P704-ELA2241-(1) 22,400 33,600 11-1/2 13-1/4 91-1/8 152 P704-ELA2801-(1) 28,000 42,000 11-1/2 13-1/4 111-1/8 180 P704-ELA3361-(1) 33,600 50,400 11-1/2 13-1/4 131-1/8 207 P704-ELA3701-(1) 37,000 55,500 11-1/2 13-1/4 131-1/8 220 Model ELA is available in: 1 = 120/1/60 2 = 240/1/60 5 = 208-240/3/60 NOTE: Standard voltage for ELA is 120/1/60, optional voltage is 240/1/60. ELA/ELE P4384 P704-ELE HIGH VELOCITY WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 20 TO +34 F High velocity/single coil construction for air distribution toward the center of the cooler. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. Air throw is 20 to 30 ft. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Electric Defrost MODEL CAPACITY (BTU/H) @ 10 F TD UNIT SIZE (in.) SHIPPING 20 F +20 F Depth Height Width WEIGHT (Lbs) P704-ELE0441-(2) 3,740 4,400 11-1/2 13-1/4 31-1/4 45 P704-ELE0521-(2) 4,420 5,200 11-1/2 13-1/4 31-1/4 47 P704-ELE0781-(2) 6,630 7,800 11-1/2 13-1/4 43-1/4 64 P704-ELE0901-(2) 7,650 9,000 11-1/2 13-1/4 43-1/4 70 P704-ELE1041-(2) 8,840 10,400 11-1/2 13-1/4 51-1/4 105 P704-ELE1321-(2) 11,220 13,200 11-1/2 13-1/4 71-1/4 120 P704-ELE1561-(2) 13,260 15,600 11-1/2 13-1/4 71-1/4 135 P704-ELE1751-(2) 14,875 17,500 11-1/2 13-1/4 71-1/4 146 P704-ELE2081-(2) 17,680 20,800 11-1/2 13-1/4 91-1/4 168 P704-ELE2601-(2) 22,100 26,000 11-1/2 13-1/4 111-1/4 199 P704-ELE3121-(2) 26,520 31,200 11-1/2 13-1/4 131-1/4 230 P704-ELE3501-(2) 29,750 35,000 11-1/2 13-1/4 131-1/4 243 Model ELE is available in: NOTE: Standard voltage for ELE is 240/1/60, optional voltage is 120/1/60. 1 = 120/1/60 2 = 240/1/60 5 = 208-240/3/60 Heavy gauge textured aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Series ELE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, terminal block, defrost termination and fan delay thermostat for positive defrost and high efficiency. 737

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-ELR/ELT HIGH VELOCITY WALK-IN-UNIT COOLERS (Gas Defrost) FOR COOLERS AND FREEZERS FROM 30 F TO +34 F High velocity/single coil construction for air distribution toward the center of the cooler. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. Air throw is 20 to 30 ft. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Heavy gauge textured aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. ELR and ELT series are provided with hot gas drain pan grid, adjustable fan delay thermostat and defrost termination thermostat. P4384 ELR Reverse style hot gas defrost ELT Three pipe hot gas defrost with gas drain pan Gas Defrost CAPACITY (BTU/H) MODEL UNIT SIZE (in.) SHIPPING @10 FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EL( )0441-(1) 3,740 4,400 11-1/2 13-1/4 31-1/4 42 P704-EL( )0521-(1) 4,420 5,200 11-1/2 13-1/4 31-1/4 45 P704-EL( )0781-(1) 6,630 7,800 11-1/2 13-1/4 43-1/4 60 P704-EL( )0901-(1) 7,650 9,000 11-1/2 13-1/4 43-1/4 66 P704-EL( )1041-(1) 8,840 10,400 11-1/2 13-1/4 51-1/4 99 P704-EL( )1321-(1) 11,220 13,200 11-1/2 13-1/4 71-1/4 113 P704-EL( )1561-(1) 13,260 15,600 11-1/2 13-1/4 71-1/4 128 P704-EL( )1751-(1) 14,875 17,500 11-1/2 13-1/4 71-1/4 148 P704-EL( )2081-(1) 17,680 20,800 11-1/2 13-1/4 91-1/4 159 P704-EL( )2601-(1) 22,100 26,000 11-1/2 13-1/4 111-1/4 187 P704-EL( )3121-(1) 26,520 31,200 11-1/2 13-1/4 131-1/4 215 P704-EL( )3501-(1) 29,750 35,000 11-1/2 13-1/4 131-1/4 238 Models ELR and ELT are available in: 1 = 120/1/60 2 = 240/1/60 5 = 208-240/3/60 NOTES: 1. Standard voltage for ELR and ELT is 120/1/60, optional voltage is 240/1/60. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. 738

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EPA MEDIUM VELOCITY WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Medium velocity/dual coil construction. Air distribution on either side of the cooler. Air throw is 8 to 15 ft each side. Heavy gauge textured aluminum casings with polycarbonate fan guards, ALUMINUM fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Air Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EPA0561-(1) 5,600 8,400 24 9-1/2 31-3/8 51 P704-EPA0831-(1) 8,300 12,450 24 9-1/2 43-3/8 69 P704-EPA0961-(1) 9,600 14,400 24 9-1/2 43-3/8 75 P704-EPA1121-(1) 11,200 16,800 24 9-1/2 51-3/8 98 P704-EPA1471-(1) 14,700 22,050 24 9-3/4 71-3/8 110 P704-EPA1681-(1) 16,800 25,200 24 9-3/4 71-3/8 121 P704-EPA1851-(1) 18,500 27,750 24 9-3/4 71-3/8 143 P704-EPA2241-(1) 22,400 33,600 24 9-3/4 91-3/8 156 P704-EPA2801-(1) 28,000 42,000 24 10 111-3/8 193 P704-EPA3361-(1) 33,600 50,400 24 10 131-3/8 227 P704-EPA3701-(1) 37,000 55,500 24 10 131-3/8 248 Model EPA is available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EPA is 120/1/60, optional voltage is 240/1/60. EPA/EPE P4386 P704-EPE MEDIUM VELOCITY WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS FROM +26 F TO +34 F Medium velocity/dual coil construction. Air distribution on either side of the cooler. Air throw is 8 to 15 ft each side. Heavy gauge textured aluminum casings with polycarbonate fan guards, ALUMINUM fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Series EPE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, terminal block, defrost termination and fan delay thermostat for positive defrost and high efficiency. Electric Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EPE0521-(2) 5,200 7,800 24 9-1/2 31-3/8 56 P704-EPE0781-(2) 7,800 11,700 24 9-1/2 43-3/8 77 P704-EPE0901-(2) 9,000 13,500 24 9-1/2 43-3/8 83 P704-EPE1041-(2) 10,400 15,600 24 9-1/2 51-3/8 108 P704-EPE1321-(2) 13,200 19,800 24 9-3/4 71-3/8 124 P704-EPE1561-(2) 15,600 23,400 24 9-3/4 71-3/8 135 P704-EPE1751-(2) 17,500 26,250 24 9-3/4 71-3/8 160 P704-EPE2081-(2) 20,800 31,200 24 9-3/4 91-3/8 176 P704-EPE2601-(2) 26,000 39,000 24 10 111-3/8 216 P704-EPE3121-(2) 31,200 46,800 24 10 131-3/8 256 P704-EPE3501-(2) 35,000 52,500 24 10 131-3/8 267 Model EPE is available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EPE is 240/1/60, optional voltage is 120/1/60. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. 739

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EPG/EPH MEDIUM VELOCITY WALK-IN-UNIT COOLERS (Gas Defrost) Medium velocity/dual coil construction. Air distribution on either side of the cooler. Air throw is 8 to 15 ft each side. Heavy gauge textured aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Series EPG and EPH units are provided with stainless steel low watt density drain pan heaters, terminal block, fan and drain pan controls for positive defrost and high efficiency. EPG Reverse cycle hot gas defrost with electric drain pan heater. EPH Three pipe hot gas defrost with electric drain pan heater. EPG/EPH P4386 Gas Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EP( )0521-(1) 5,200 7,800 24 9-1/2 31-3/8 54 P704-EP( )0781-(1) 7,800 11,700 24 9-1/2 43-3/8 72 P704-EP( )0901-(1) 9,000 13,500 24 9-1/2 43-3/8 78 P704-EP( )1041-(1) 10,400 15,600 24 9-1/2 51-3/8 104 P704-EP( )1321-(1) 13,200 17,800 24 9-3/4 71-3/8 118 P704-EP( )1561-(1) 15,600 23,400 24 9-3/4 71-3/8 128 P704-EP( )1751-(1) 17,500 26,250 24 9-3/4 71-3/8 154 P704-EP( )2081-(1) 20,800 31,200 24 9-3/4 91-3/8 162 P704-EP( )2601-(1) 26,000 39,000 24 10 111-3/8 211 P704-EP( )3121-(1) 31,200 46,800 24 10 131-3/8 236 P704-EP( )3501-(1) 35,000 52,500 24 10 131-3/8 251 Models EPG and EPH are available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EPG and EPH is 120/1/60, optional voltage is 240/1/60. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. 740

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EVA LOW VELOCITY WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F Low velocity/dual coil construction. The fans draw air from the fan guards and discharge it on two evaporator coils, on each side of the unit. Air throw is 8 to 12 ft each side. Heavy gauge white-painted aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or Air Defrost plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EVA0601-(1) 6,000 9,000 24 9-1/2 51-3/8 74 P704-EVA0801-(1) 8,000 12,000 24 9-3/4 71-3/8 98 P704-EVA1001-(1) 10,000 15,000 24 9-3/4 71-3/8 112 P704-EVA1201-(1) 12,000 18,000 24 12-1/4 71-3/8 130 P704-EVA1501-(1) 15,000 22,500 24 12-1/4 91-3/8 179 P704-EVA1801-(1) 18,000 27,000 24 12-1/4 91-3/8 205 P704-EVA2401-(1) 24,000 36,000 24 14-3/4 91-3/8 260 P704-EVA3001-(1) 30,000 45,000 24 15 111-3/8 316 P704-EVA3601-(1) 36,000 54,000 24 15 131-3/8 371 Model EVA is available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EVA is 120/1/60, optional voltage is 240/1/60. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. EVA/EVE P4387B P704-EVE LOW VELOCITY WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS FROM +26 F TO +34 F Low velocity/dual coil construction. The fans draw air from the fan guards and discharge it on two evaporator coils, on each side of the unit. Air throw is 8 to 12 ft each side. Heavy gauge white-painted aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Electric Defrost Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Series EVE units are provided with stainless steel flexible low watt density tubular heaters inserted within the evaporator, terminal block, defrost termination and fan delay thermostat for positive defrost and high efficiency. MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EVE0601-(2) 6,000 9,000 24 9-1/2 51-3/8 80 P704-EVE0801-(2) 8,000 12,000 24 9-3/4 71-3/8 107 P704-EVE1001-(2) 10,000 15,000 24 9-3/4 71-3/8 121 P704-EVE1201-(2) 12,000 18,000 24 12-1/4 71-3/8 141 P704-EVE1501-(2) 15,000 22,500 24 12-1/4 91-3/8 194 P704-EVE1801-(2) 18,000 27,000 24 12-1/4 91-3/8 220 P704-EVE2401-(2) 24,000 36,000 24 14-3/4 91-3/8 280 P704-EVE3001-(2) 30,000 45,000 24 15 111-3/8 340 P704-EVE3601-(2) 36,000 54,000 24 15 131-3/8 400 Model EVE is available in: 1 = 120/1/60 2 = 240/1/60 NOTES: 1. Standard voltage for EVE is 240/1/60, optional voltage is 120/1/60. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. 741

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EVG/EVH LOW VELOCITY WALK-IN-UNIT COOLERS (Gas Defrost) FOR COOLERS FROM +26 F to +34 F Low velocity/dual coil construction. The fans draw air from the fan guards and discharge it on two evaporator coils, on each side of the unit. Air throw is 8 to 12 ft each side. Heavy gauge white-painted aluminum casings with polycarbonate fan guards, aluminum fans and stainless steel or plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. EVG Reverse cycle defrost with electric drain pan heaters. EVH Three pipe defrost pan heaters with electric drain pan heaters. Gas Defrost MODEL CAPACITY (BTU/H) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EV( )0601-(1) 6,000 9,000 24 9-1/2 51-3/8 77 P704-EV( )0801-(1) 8,000 12,000 24 9-3/4 71-3/8 102 P704-EV( )1001-(1) 10,000 15,000 24 9-3/4 71-3/8 115 P704-EV( )1201-(1) 12,000 18,000 24 12-1/4 71-3/8 134 P704-EV( )1501-(1) 15,000 22,500 24 12-1/4 91-3/8 184 P704-EV( )1801-(1) 18,000 27,000 24 12-1/4 91-3/8 210 P704-EV( )2401-(1) 24,000 36,000 24 14-3/4 91-3/8 266 P704-EV( )3001-(1) 30,000 45,000 24 15 111-3/8 324 P704-EV( )3601-(1) 36,000 54,000 24 15 131-3/8 380 Models EVG and EVH are available in: 1 = 120/1/60 2 = 240/1/60 5 = 208-240/3/60 NOTES: 1. Standard voltage for EVG and EVH is 120/1/60, optional voltage is 240/1/60. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. EVG/EVH P4387B 742

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EKA/EKE COMPACT WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F; (Electric Defrost) FOR COOLERS AND FREEZERS FROM 20 F TO +34 F Compact, high velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 40 to 50 ft. Heavy gauge, textured aluminum casings, polycarbonate fan guards and aluminum fans, pleated hardware for a light weight and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. EKE models are provided with a non-adjustable defrost termination and fan delay thermostat. All units feature low watt density tubular heaters. They are imbedded within the coil for positive defrost and high energy efficiency. This allows to reduce heat gain in coolers and freezers. They are available for 208-240/1/60, 208-240/3/60, 480/3/60 and 600/3/60. All units use proper quantity of heaters for even-phase loading. P4385 Air Defrost CAPACITY (MBH) UNIT SIZE (in.) SHIPPING MODEL WEIGHT 10 F TD 15 F TD Depth Height Width (Lbs) P704-EKA1400-( ) 14 21 21-1/2 21-1/8 43 100 P704-EKA1600-( ) 16 24 21-1/2 21-1/8 43 110 P704-EKA1800-( ) 18 27 21-1/2 21-1/8 51 153 P704-EKA2100-( ) 21 31.5 21-1/2 21-1/8 51 167 P704-EKA2400-( ) 24 36 21-1/2 21-1/8 71 196 P704-EKA3000-( ) 30 45 21-1/2 21-1/8 71 214 P704-EKA3600-( ) 36 54 21-1/2 21-1/8 91 243 P704-EKA4200-( ) 42 63 21-1/2 21-1/8 91 264 P704-EKA5400-( ) 54 81 21-1/2 21-1/8 111 313 P704-EKA6300-( ) 63 94.5 21-1/2 21-1/8 131 361 Model EKA is available in: 2 = 240/1/60 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTE: For EKA, standard units are 8 FPI, for 4 FPI multiply capacity by 0.75. Electric Defrost CAPACITY (MBH) SHIPPING MODEL UNIT SIZE (in.) @10 FTD WEIGHT 20 F +20 F Depth Height Width (Lbs) P704-EKE1300-( ) 11.1 13 21-1/2 21-1/8 43 110 P704-EKE1500-( ) 12.8 15 21-1/2 21-1/8 43 121 P704-EKE1700-( ) 14.5 17 21-1/2 21-1/8 51 168 P704-EKE2000-( ) 17 20 21-1/2 21-1/8 51 184 P704-EKE2200-( ) 18.7 22 21-1/2 21-1/8 71 216 P704-EKE2900-( ) 24.7 29 21-1/2 21-1/8 71 235 P704-EKE3400-( ) 28.9 34 21-1/2 21-1/8 91 267 P704-EKE4000-( ) 34 40 21-1/2 21-1/8 91 290 P704-EKE5000-( ) 42.5 50 21-1/2 21-1/8 111 344 P704-EKE6000-( ) 51 60 21-1/2 21-1/8 131 397 Model EKE is available in: 2 = 240/1/60 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTE: For EKE, standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. 743

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EKR/EKT COMPACT WALK-IN-UNIT COOLERS (Gas Defrost) FOR COOLERS AND FREEZERS FROM 20 F TO +34 F Compact, high velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 40 to 50 ft. Heavy gauge textured aluminum casings, polypropylene fan guards and aluminum fans, plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. EKR and EKT models are provided with a sealed nonadjustable fan delay thermostat, defrost termination thermostat and a hot gas defrost drain pan grid. Use EKR model for reverse cycle defrost or EKT model for three pipe defrost. All models are provided with terminal block(s) for easier field wiring. Terminals are clearly identified to match wiring diagram which is supplied with the unit. P4385 EKR Reverse cycle hot gas defrost with hot gas drain pan grid. EKT Three pipe hot gas defrost with hot gas drain pan grid. Hot Gas Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) SHIPPING @10 FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EK( )1300-( ) 11.1 13 21-1/2 21-1/8 43 108 P704-EK( )1500-( ) 12.8 15 21-1/2 21-1/8 43 118 P704-EK( )1700-( ) 14.5 17 21-1/2 21-1/8 51 165 P704-EK( )2000-( ) 17 20 21-1/2 21-1/8 51 180 P704-EK( )2200-( ) 18.7 22 21-1/2 21-1/8 71 211 P704-EK( )2900-( ) 24.7 29 21-1/2 21-1/8 71 230 P704-EK( )3400-( ) 28.9 34 21-1/2 21-1/8 91 261 P704-EK( )4000-( ) 34 40 21-1/2 21-1/8 91 284 P704-EK( )5000-( ) 42.5 50 21-1/2 21-1/8 111 337 P704-EK( )6000-( ) 51 60 21-1/2 21-1/8 131 388 Models EKR and EKT are available in: 2 = 240/1/60 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTE: Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. 744

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EMA MEDIUM PROFILE WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 40 to 50 ft. Heavy gauge textured aluminum casings with PVC coated Air Defrost wire fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. MODEL CAPACITY (MBH) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EMA02150-( ) 21.5 32.3 29 28 54-1/4 210 P704-EMA02550-( ) 25.5 38.3 29 28 54-1/4 225 P704-EMA03000-( ) 30.0 45.0 29 28 54-1/4 245 P704-EMA04300-( ) 43.0 64.5 29 28 94-1/4 375 P704-EMA05100-( ) 51.0 76.5 29 28 94-1/4 400 P704-EMA06000-( ) 60.0 90.0 29 28 94-1/4 440 P704-EMA07650-( ) 76.5 114.8 29 28 134-1/4 595 P704-EMA09000-( ) 90.0 135.0 29 28 134-1/4 640 P704-EMA10200-( ) 102 153 29 38 134-1/4 785 P704-EMA12000-( ) 120 180 29 38 134-1/4 830 Model EMA is available in: 2 = 240/1/60 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTE: Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. EMA/EME P4378C P704-EME MEDIUM PROFILE WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throwis40to50ft. Heavy gauge textured aluminum casings with PVC coated wire fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Electric Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) SHIPPING @ 10 F TD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EME02000-( ) 17.0 20.0 29 28 54-1/4 255 P704-EME02400-( ) 20.4 24.0 29 28 54-1/4 265 P704-EME02900-( ) 24.7 29.0 29 28 54-1/4 295 P704-EME04000-( ) 34.0 40.0 29 28 94-1/4 455 P704-EME04800-( ) 40.8 48.0 29 28 94-1/4 480 P704-EME05800-( ) 49.3 58.0 29 28 94-1/4 540 P704-EME07200-( ) 61.2 72.0 29 28 134-1/4 720 P704-EME08700-( ) 74 87.0 29 28 134-1/4 772 P704-EME09600-( ) 81.6 96 29 38 134-1/4 930 P704-EME1600-( ) 98.6 116 29 38 134-1/4 989 Model EME is available in: 2 = 240/1/60 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTE: Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Series EME units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. 745

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EMG/EMH/EMR/EMT MEDIUM PROFILE WALK-IN-UNIT COOLERS (Gas Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 40 to 50 ft. Heavy gauge textured aluminum casings with PVC coated wire fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Life lubricated, thermal protected, heavy duty fan motors are provided for long life and dependable service. Series EMG and EMH are provided with stainless steel low watt density drain pan heaters, terminal block, fan motor, heater contractors, fan and drain pan controls for positive defrost and high efficiency. EMG Reverse cycle hot gas defrost with electric drain pan heater. EMH Three pipe hot gas defrost with electric drain pan heater. EMR Reverse cycle hot gas defrost with hot gas drain pan grid. EMT Three pipe hot gas defrost with hot gas drain pan grid. Gas Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) SHIPPING @10 FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EM( )02000-( ) 17.0 20.0 29 28 54-1/4 230 P704-EM( )02400-( ) 20.4 24.0 29 28 54-1/4 245 P704-EM( )02900-( ) 24.7 29.0 29 28 54-1/4 265 P704-EM( )04000-( ) 34.0 40.0 29 28 94-1/4 405 P704-EM( )04800-( ) 40.8 48.0 29 28 94-1/4 430 P704-EM( )05800-( ) 49.3 58.0 29 28 94-1/4 470 P704-EM( )07200-( ) 61.2 72.0 29 28 134-1/4 630 P704-EM( )08700-( ) 74 87.0 29 28 134-1/4 680 P704-EM( )09600-( ) 81.6 96 29 38 134-1/4 835 P704-EM( )11600-( ) 98.6 116 29 38 134-1/4 900 Models EMG, EMH, EMR and EMT are available in: 2 = 240/1/60 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTES: 1. For EMT and EMR height add 5/8 inch. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. EMG/EMH/EMR/EMT P4378C 746

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EHA HIGH PROFILE WALK-IN-UNIT COOLERS (Air Defrost) FOR COOLERS ABOVE +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 50 to 60 ft. Heavy gauge, galvanized steel casings with PVC coated wire Air Defrost fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. MODEL CAPACITY (MBH) UNIT SIZE (in.) SHIPPING 10 F TD 15 F TD Depth Height Width WEIGHT (Lbs) P704-EHA04500-( ) 45.0 67.5 29-1/2 53 54-1/4 480 P704-EHA05400-( ) 54.0 81.0 29-1/2 53 54-1/4 500 P704-EHA06200-( ) 62.0 93.0 29-1/2 53 54-1/4 545 P704-EHA09000-( ) 90.0 135.0 29-1/2 53 94-1/4 805 P704-EHA10800-( ) 108.0 162.0 29-1/2 53 94-1/4 850 P704-EHA12400-( ) 124.0 186.0 29-1/2 53 94-1/4 940 P704-EHA16200-( ) 162.0 243.0 29-1/2 53 134-1/4 1240 P704-EHA18600-( ) 186.0 279.0 29-1/2 53 134-1/4 1335 P704-EHA24800-( ) 248 372 29-1/2 53 174-1/4 1880 Model EHA is available in: 2 = 240/1/60 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTE: For EHA, standard units are 8 FPI, for 4 FPI multiply capacity by 0.75. EHA/EHE P4378D P704-EHE HIGH PROFILE WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +34 F High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throwis60to70ft. Heavy gauge, galvanized steel casings with PVC coated wire fan guards and aluminum fans and plated hardware for a light weight and corrosion free assembly. Electric Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) SHIPPING @ 10 F TD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EHE04000-( ) 34.0 40.0 29-1/2 53 54-1/4 560 P704-EHE04800-( ) 40.8 48.0 29-1/2 53 54-1/4 590 P704-EHE06000-( ) 51.0 60.0 29-1/2 53 54-1/4 640 P704-EHE08000-( ) 68.0 80.0 29-1/2 53 94-1/4 960 P704-EHE09600-( ) 81.6 96.0 29-1/2 53 94-1/4 1018 P704-EHE12000-( ) 102.0 120.0 29-1/2 53 94-1/4 1125 P704-EHE14000-( ) 122.4 144.0 29-1/2 53 134-1/4 1495 P704-EHE18000-( ) 153.0 180.0 29-1/2 53 134-1/4 1610 P704-EHE24000-( ) 204 240 29-1/2 53 174-1/4 2036 Model EHE is available in: 2 = 240/1/60 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTE: For EHE, standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. Series EHE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. 747

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EHG/EHH/EHR/EHT HIGH PROFILE WALK-IN-UNIT COOLERS (Gas Defrost) High velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 50 to 60 ft. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. SeriesEHGandEHHareprovidedwithstainlesssteellow watt density drain pan heaters, terminal block, fan motor, heater contractors, fan and drain pan controls for positive defrost and high efficiency. EHG Reverse cycle hot gas defrost with electric drain pan heater. EHH Three pipe hot gas defrost with electric drain pan heater. EHR Reverse cycle hot gas defrost with hot gas drain pan grid. EHT Three pipe hot gas defrost with hot gas drain pan grid. Gas Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) SHIPPING @10 FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EH( )04000-( ) 34.0 40.0 29-1/2 53 54-1/4 500 P704-EH( )04800-( ) 40.8 48.0 29-1/2 53 54-1/4 520 P704-EH( )06000-( ) 51.0 60.0 29-1/2 53 54-1/4 565 P704-EH( )08000-( ) 68.0 80.0 29-1/2 53 94-1/4 835 P704-EH( )09600-( ) 81.6 96.0 29-1/2 53 94-1/4 880 P704-EH( )12000-( ) 102.0 120.0 29-1/2 53 94-1/4 970 P704-EH( )14000-( ) 122.4 144.0 29-1/2 53 134-1/4 1280 P704-EH( )18000-( ) 153.0 180.0 29-1/2 53 134-1/4 1375 P704-EH( )24000-( ) 204 240 29-1/2 53 174-1/4 1940 Models EHG, EHH, EHR and EHT are available in: 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTES: 1. For EHR and EHT height add 5/8 inch. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. EHG/EHH/EHR/EHT P4378D 748

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EIE/EIG/EIH/EIR/EIT INDUSTRIAL WALK-IN-UNIT COOLERS (Electric Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +0 F; (Hot Gas Defrost) FOR COOLERS AND FREEZERS FROM 40 F TO +0 F Extra-high velocity/single coil construction. Air distribution toward the center of the cooler or freezer. Air throw is 60 to 70 ft. Heavy gauge, galvanized steel with PVC coated wire fan guards and aluminum fans and plated hardware for a heavy duty and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. Series EIE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. Series EIG and EIH are provided with stainless steel low watt density drain pan heaters, terminal block, fan motor, heater contactors, fan and drain pan controls for positive defrost and high efficiency. EIE EIG EIH EIR EIT Electric Defrost Reverse cycle hot gas defrost with electronic drain pan. Three pipe hot gas defrost with electronic drain pan. Reverse cycle hot gas defrost with hot gas drain pan. Three pipe defrost with hot gas drain pan. Electric Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) SHIPPING @10 FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EIE04400-( ) 37.4 44 29-1/2 53 54-1/4 560 P704-EIE05400-( ) 45.9 54 29-1/2 53 54-1/4 590 P704-EIE06800-( ) 57.8 68 29-1/2 53 54-1/4 640 P704-EIE08800-( ) 74.8 88 29-1/2 53 94-1/4 960 P704-EIE10800-( ) 91.8 108 29-1/2 53 94-1/4 1018 P704-EIE13600-( ) 115.6 136 29-1/2 53 94-1/4 1125 P704-EIE16200-( ) 137.7 162 29-1/2 53 134-1/4 1495 P704-EIE20400-( ) 173.4 204 29-1/2 53 134-1/4 1610 P704-EIE27200-( ) 231.2 272 29-1/2 53 174-1/4 2250 Hot Gas Defrost CAPACITY (MBH) MODEL UNIT SIZE (in.) SHIPPING @10 FTD WEIGHT (Lbs) 20 F +20 F Depth Height Width P704-EI( )04400-( ) 37.4 44 29-1/2 53 54-1/4 500 P704-EI( )05400-( ) 45.9 54 29-1/2 53 54-1/4 520 P704-EI( )06800-( ) 57.8 68 29-1/2 53 54-1/4 565 P704-EI( )08800-( ) 75.2 88 29-1/2 53 94-1/4 835 P704-EI( )10800-( ) 91.8 108 29-1/2 53 94-1/4 880 P704-EI( )13600-( ) 115.8 136 29-1/2 53 94-1/4 970 P704-EI( )16200-( ) 137.7 162 29-1/2 53 134-1/4 1280 P704-EI( )20400-( ) 173.4 204 29-1/2 53 134-1/4 1375 P704-EI( )27200-( ) 231 272 29-1/2 53 174-1/4 1940 Models EIE, EIG, EIH, EIR and EIT are available in: 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 NOTES: 1. For EIT and EIR height add 5/8 inch. 2. Standard units are 6 FPI, for 4 FPI multiply capacity by 0.85. EIE/EIG/EIH/EIR/EIT P4378D 749

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EBE BLAST FREEZER UNIT COOLERS (Electric Defrost) FOR FREEZERS FROM 40 F TO +0 F Extra-high velocity/floor mounted units. Designed for fast freezing in tunnel. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. The blast freezer series EB casings are heavy gauge, galvanized steel with PVC coated wire fan guards, aluminum fans and plated hardware for a heavy duty and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. Series EBE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. P4387 Electric Defrost CAPACITY (MBH) @ 10 F TD MODEL UNIT SIZE (in.) SHIPPING 40 F SST AIR STATIC WEIGHT (Lbs) 0 0.1 0.2 Depth Height Width P704-EBE03420-( ) 32 32 31 37 56 54 750 P704-EBE04530-( ) 43 42 41 37 56 54 830 P704-EBE05460-( ) 52 51 49 37 56 54 880 P704-EBE06840-( ) 67 65 63 37 56 94 1190 P704-EBE09060-( ) 88 86 84 37 56 94 1320 P704-EBE10910-( ) 107 104 99 37 56 94 1430 P704-EBE13600-( ) 132 126 121 37 56 134 1800 P704-EBE16370-( ) 158 156 150 37 56 134 1900 P704-EBE18610-( ) 177 173 170 37 56 174 2180 P704-EBE22210-( ) 211 208 201 37 56 174 2370 P704-EBE17160-( ) 163 159 154 37 96 94 2100 P704-EBE20980-( ) 199 195 190 37 96 94 2205 P704-EBE25730-( ) 245 241 237 37 96 134 2700 P704-EBE31460-( ) 299 286 279 37 96 134 3060 P704-EBE35400-( ) 336 328 316 37 96 174 3960 P704-EBE42720-( ) 406 388 378 37 96 174 4410 Model EBE is available in: 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 750

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EBR/EBT BLAST FREEZER UNIT COOLERS (Gas Defrost) FOR FREEZERS FROM 40 F TO +0 F Extra-high velocity/floor mounted units. Designed for fast freezing in tunnel. The fans draw air from the evaporator coil and discharge it through the fan guards on the front of the unit. The blast freezer series EB casings are heavy gauge, galvanized steel with PVC coated wire fan guards, aluminum fans and plated hardware for a heavy duty and corrosion free assembly. Life lubricated, thermally protected, heavy duty fan motors are provided for long life and dependable service. Series EBR and EBT are provided with hot gas drain pan grid, adjustable fan delay thermostat and defrost termination thermostat. EBR Reverse cycle hot gas defrost with hot gas drain pan. EBT Three pipe hot gas defrost with hot gas drain pan. P4387 Gas Defrost CAPACITY (MBH) @ 10 F TD MODEL UNIT SIZE (in.) SHIPPING 40 F SST AIR STATIC WEIGHT (Lbs) 0 0.1 0.2 Depth Height Width P704-EB( )03420-( ) 34 33 32 37 56 54 750 P704-EB( )04530-( ) 46 44 43 37 56 54 830 P704-EB( )05460-( ) 55 54 52 37 56 54 880 P704-EB( )06840-( ) 71 69 67 37 56 94 1190 P704-EB( )09060-( ) 93 91 88 37 56 94 1320 P704-EB( )10910-( ) 113 109 104 37 56 94 1430 P704-EB( )13600-( ) 139 137 136 37 56 134 1800 P704-EB( )16370-( ) 166 164 157 37 56 134 1900 P704-EB( )18610-( ) 186 182 179 37 56 174 2180 P704-EB( )22210-( ) 222 219 211 37 56 174 2370 P704-EB( )17160-( ) 172 167 163 37 96 94 2100 P704-EB( )20980-( ) 210 205 200 37 96 94 2205 P704-EB( )25730-( ) 257 254 250 37 96 134 2700 P704-EB( )31460-( ) 315 301 293 37 96 134 3060 P704-EB( )35400-( ) 354 345 333 37 96 174 3960 P704-EB( )42720-( ) 427 408 398 37 96 174 4410 Models EBR and EBT are available in: 5 = 208-240/3/60 8 = 600/3/60 9 = 480/3/60 751

TOTALINE REFRIGERATION UNIT COOLERS P704 REFRIGERATION UNIT COOLERS P704-EFE/EFR/EFT FREE-STANDING BLAST FREEZER (Electric Defrost) AND (Gas Defrost) Extra-high velocity/floor mounted units. Designed for fast freezing in tunnel. The field supplied fans can be mounted for air draw or blow through installation. The blast freezer series EF casings are heavy gauge, galvanized steel for a heavy duty and corrosion free assembly. Series EFE units are provided with stainless steel, flexible low watt density tubular heaters inserted within the evaporator, an adjustable defrost termination and fan delay thermostat for positive defrost and high efficiency. EFR/EFT series are provided with a hot gas drain pan, adjustable fan. EFR EFT Reverse cycle hot gas defrost with hot gas drain pan. Three pipe hot gas defrost with hot gas drain pan. P4388 Electric Defrost CAPACITY (MBH) @ 10 F TD 40 F SST MODEL UNIT SIZE (in.) SHIPPING FPM WEIGHT (Lbs) 600 700 800 Depth Height Width P704-EFE03420-( ) 29.4 30.9 33.3 27 56 54 580 P704-EFE04530-( ) 40.1 42.5 46.2 27 56 54 650 P704-EFE05460-( ) 49.1 52.4 55.5 27 56 54 710 P704-EFE06840-( ) 60.7 63.8 66.7 27 56 94 880 P704-EFE09060-( ) 81.2 86.8 91.4 27 56 94 1000 P704-EFE10910-( ) 98.2 108.2 114.6 27 56 94 1140 P704-EFE13600-( ) 122 133.9 140.6 27 56 134 1380 P704-EFE16370-( ) 148.7 158.8 173.7 27 56 134 1570 P704-EFE18610-( ) 163.7 173.6 188.6 27 56 174 1730 P704-EFE22210-( ) 199.2 212.8 225.3 27 56 174 2020 P704-EFE17160-( ) 145.2 158.7 167.1 27 96 94 1657 P704-EFE20980-( ) 181.6 194.1 205.6 27 96 94 1810 P704-EFE25730-( ) 209.6 238.1 250.7 27 96 134 1953 P704-EFE31460-( ) 274.5 293.5 308.4 27 96 134 2322 P704-EFE35400-( ) 299.3 317.5 334.3 27 96 174 3114 P704-EFE42720-( ) 358.9 398.5 419 27 96 174 3620 Gas Defrost CAPACITY (MBH) @ 10 F TD 40 F SST MODEL UNIT SIZE (in.) SHIPPING FPM WEIGHT (Lbs) 600 700 800 Depth Height Width P704-EF(*)03420-( ) 31 32.5 35.1 27 56 54 580 P704-EF(*)04530-( ) 42.3 44.8 48.6 27 56 54 650 P704-EF(*)05460-( ) 51.7 55.2 58.4 27 56 54 710 P704-EF(*)06840-( ) 63.9 67.1 70.2 27 56 94 880 P704-EF(*)09060-( ) 85.5 91.4 96.2 27 56 94 1000 P704-EF(*)10910-( ) 103.3 113.9 120.6 27 56 94 1140 P704-EF(*)13600-( ) 128.5 140.5 148 27 56 134 1380 P704-EF(*)16370-( ) 156.5 167.2 182.8 27 56 134 1570 P704-EF(*)18610-( ) 172.4 182.8 198.8 27 56 174 1730 P704-EF(*)22210-( ) 209.6 224.1 237.2 27 56 174 2020 P704-EF(*)17160-( ) 152.8 167.1 175.9 27 96 94 1657 P704-EF(*)20980-( ) 191.2 204.3 216.4 27 96 94 1810 P704-EF(*)25730-( ) 220.7 250.6 263.9 27 96 134 1953 P704-EF(*)31460-( ) 288.9 309 324.6 27 96 134 2322 P704-EF(*)35400-( ) 315 334.2 351.9 27 96 174 3114 P704-EF(*)42720-( ) 377.8 419.5 441 27 96 174 3620 *(R) or (T). Models EFE, EFR AND EFT are available in: 5 = 208-240/3/60 8 = 600/3/60 752

TOTALINE REFRIGERATION CONDENSING UNITS P705 INDOOR & OUTDOOR REFRIGERATION CONDENSING UNITS Totaline s outdoor and indoor refrigeration condensing units are available in several models and sizes for various applications. Condensing units are air cooled or water cooled and are available with semi-hermetic, hermetic, or scroll compressors. A remote condenser unit is also available. Sizes are available from 3/4 HP up to 80 HP. STANDARD FEATURES: Painted outdoor galvanized protective cabinet (outdoor units up to 22 HP). Outdoor galvanized protective cabinet (outdoor units above 25 HP). Aluminum fin and copper tube condenser. True subcooling circuit integrated in the condenser coil. Fixed head pressure control flooding valve (outdoor units up to 22 HP). Adjustable head pressure control flooding valves (outdoor units above 25 HP). Crankcase heater (outdoor units). Rigid mounted hermetic and scroll compressors. Spring mounted semi-hermetic compressor with vibrasorbers. Tamper-proof adjustable high pressure switch. Tamper-proof adjustable low pressure switch (hermetic and scroll). Units available for R-22, R-404A, R-507 and -134a. P4389A P4389B FACTORY-INSTALLED OPTIONS: Low ambient kit includes: heated and insulated receiver. Liquid line kit: liquid drier (standard or replaceable), sight glass/moisture indicator, liquid line solenoid valve (shipped loose). Suction filter (standard or replaceable). Adjustable high and low pressure switch with flexible hoses. Suction accumulator. Oil separator (ICH units). Oil separator including check valve, insulation and heater (OCH units). Non-fused disconnect switch. Fused disconnect switch. Hot gas defrost kit. Electric defrost timer (single phase). Electric defrost kit includes timer, heater, fan contactors and lockout relay (3 phase). Air defrost timer. Fan speed control kit (dual fan condensing units only). 753