Side-Shiftg Fork Positioners Heavy Duty T410 T411 T411/I T411R Premium Quality and Design FORK POSITIONERS 2016
Heavy Duty Side-Shiftg Fork Positioners Fork positioners can easily handle loads with varyg widths to help you meet your complex material handlg demands. The truck operator can conveniently control the fork spacg on these high-visibility fork positioners from the cab, which creases the operatg efficiency and productivity. Increasg the fork width for wide loads improves the stability of the load and reduces the risk of the load slippg off the forks. djustg the fork width to the width of the load prevents over-loadg any part of the mast. The high-visibility design gives the driver exact and precise control over the fork position. Recommended pplication Standard duty* Medium duty* Heavy duty Fork carriage guided fork adjustment for pick-up of pallets with different widths est for level workg conditions Ideal for workg production halls and relatively clean environments Openg range is restricted to the width of the attachment Frequent fork adjustment Operations with long forks Different kds of goods and ways of handlg (e.g. forwarders) Outdoor operation Openg range can be slightly larger than the width of the attachment Load can be picked up between the forks Use of long forks and load pick up at fork tips Frequent load pick up at maximum openg range and/or truck capacity Uneven floors Quick workg cycles Openg range much larger than the width of the attachment * further formation can be found the brochures showg the range T160 / T466 and/or T156/ T163. T411 Fork Positioners The T411 hook-on fork positioner is a robust attachment for exceptionally heavy duty operation. It is ideal for uneven surfaces. Loads that push the forks outwards (such as coils, cable drums, rolls or wire coils) can be readily supported due to the large overlap of sectional profiles between the fork guide and the clamp body. This fork positioner lets the driver work quickly and accurately position the load. This fork positioner is ideal for the efficient and safe of loads with varyg sizes, such as: pallets and grate boxes carried lengthwise or crosswise rods pipes drums cable reels stacked chipboard or plasterboard panels wooden beams steel girders prefabricated concrete elements 1 2 3 4 5 6 7 8 2 1-888-946-3330 www.lift-tek.com
T410 and T411R Fork Positioners The robust T410 Fork Positioner is the perfect choice when a large openg range is required on a small construction width. This attachment is ideal for heavy duty operation and is supplied without forks. Numerous dividual configurations are possible. Fork connections accordg to NSI/ ITSDF 56.11.4 1 2 4 5 6 7 1 2 3 4 5 6 7 8 The T411R is a fork positioner with round forks designed for the handlg of cyldrical loads, such as paper rolls, rolls of carpet or coils. These can be transported without damage between the two round forks. T411 and T411I Fork Positioners The T411 hook-on fork positioner is a robust attachment with large openg ranges for exceptionally heavy duty operation. It is ideal for uneven surfaces. This fork positioner has an openg range that is significantly larger than the construction width, which makes it ideal for handlg long loads and steel girders. 2 3 4 5 6 7 8 sideshift with serial valve blocks - dependent on openg range also available without sideshift 2 3 4 5 6 7 8 The tegrated T411I is designed for direct tegration the mast of the lift truck. The residual capacity is higher than the T411 range because of the slightly lower lost load center, and the lower weight through elimation of the fork carriage. Product and technical features 1 Separate sideshift with SOFTSTOP end-of-stroke slow-down and SMOOTHROLL bottom brackets with roller guidance. 2 3 4 5 6 7 8 Improved visibility with a design that provides best view of the fork tips and the load Forks are welded firmly to the guide profile for maximum stability and maximum residual capacity Large overlap of sectional profiles between fork guide and clamp body to hold the forks position. Highly durable slidg profiles with optimal slidg properties Extensive hydraulic features such as pressure relief valve and hoses with serial couplg. Optional accessories clude quick release brackets or load backrest Optionally available with screw-on forks 1 5 6 6 7 8 1-888-946-3330 www.lift-tek.com 3
Fork Positioner T410 with dependent sideshift without forks for forks acc. to ISO 2330 2 hydraulic functions S C Class 1 T 410 2,750 24 ± 3.9 21.3-59.1 29.5 9.4 2 7.2 3.5 380 21.3-67.7 38.2 3.4 430 21.7-74.8 44.5 3.4 455 20.9-76.0 47.2 3.4 465 1.6 T 410 4,250 24 ± 3.9 20.9-67.3 40.9 9.4 2 7.4 3.4 510 22.0-73.2 44.5 3.3 520 22.0-81.1 52.4 3.3 550 2.5 T 410 5,000 24 ± 3.9 20.9-67.3 40.9 9.4 2 7.8 3.6 540 22.0-73.2 44.5 3.5 555 22.0-81.1 52.4 3.5 580 2.5 T 410 5,500 24 ± 3.9 22.0-73.2 44.5 9.4 3 8.2 3.3 620 22.0-81.1 52.4 3.3 650 3 T 410 6,500 24 ± 3.9 22.0-73.2 44.5 9.4 2/3 8.8 3.7 825 22.0-81.1 52.4 3.7 865 21.7-85.4 57.5 3.7 890 4 T 410 7,500 24 ± 3.9 22.0-73.2 44.5 9.4 3 9.2 3.9 925 22.0-81.1 52.4 3.9 970 21.7-85.4 57.5 3.9 995 4.5 T 410 9,000 24 ± 3.9 22.8-76.0 47.2 9.4 3 10.2 4.5 1,095 21.3-78.0 52.4 4.4 1,135 18.5-77.6 57.5 4.4 1,175 22.8-89.8 61.0 4.4 1,205 4.8 T 410 10,750 24 ± 3.9 22.8-76.0 47.2 9.4 3 10 4.4 1,100 21.3-78.0 52.4 4.4 1,130 18.5-77.6 57.5 4.4 1,160 22.8-89.8 61.0 4.4 1,195 5 T 410 13,500 24 ± 6.3 20.9-85.0 61.0 10.2 4 10.2 3.9 1,345 31.5-106.3 61.0 4 1,475 20.9-95.7 71.7 3.9 1,420 Not suitable for clampg between the forks. Fork Positioner with cylder- and sideshift protection upon request. Load ackrest T479. Forks suitable for above attachments available upon request. Fork Positioner without sideshift model T400. 1.6-2.5T410 1T & 3-6T410 4 1-888-946-3330 www.lift-tek.com
Fork Positioner T411 with dependent sideshift 2 hydraulic functions S D E G Class 1 T 411 2,750 24 ± 3.9 13.4-51.2 29.5 1.6 3.9 47.2 2 5.2 10.6 520 13.4-59.8 38.2 9.9 570 13.8-66.9 44.5 9.6 595 13.0-68.1 47.2 9.5 605 1.6 T 411 4,250 24 ± 3.9 11.4-57.9 40.9 1.8 4.7 47.2 2 5.2 10.5 730 12.6-63.8 44.5 10.3 745 12.6-71.7 52.4 10 775 1.6 T 401 4,250 24 11.8-51.2 33.5 1.8 4.7 47.2 2 5 10.9 685 2.5 T 411 5,000 24 ± 3.9 11.4-57.9 40.9 2 4.7 47.2 2 5.6 11 795 12.6-63.8 44.5 11 810 12.6-71.7 52.4 10 835 2.5 T 401 5,000 24 11.8-51.2 33.5 2 4.7 47.2 2 5.4 11 730 2.5 T 411 5,500 24 ± 3.9 12.6-63.8 44.5 2 4.7 47.2 3 5.6 10 860 12.6-71.7 52.4 10 885 3 T 411 6,500 24 ± 3.9 10.2-61.4 44.5 2 5.9 47.2 2/3 6 10 1,090 10.2-69.3 52.4 10 1,130 5.1-64.2 57.5 10 1,150 9.8-73.6 57.5 10 1,155 4 T 411 7,500 24 ± 3.9 10.2-61.4 44.5 2 5.9 47.2 3 6 10 1,230 10.2-69.3 52.4 10 1,275 5.1-64.2 57.5 9 1,300 9.8-73.6 57.5 9 1,305 4.5 T 411 9,000 24 ± 3.9 11-64.2 47.2 2.4 5.9 47.2 3 7 10 1,460 9.4-66.1 52.4 10 1,495 6.7-65.7 57.5 10 1,535 11.0-78.0 61 10 1,570 4.5 T 411.1 9,000 24 ± 3.9 11-64.2 47.2 2.4 5.9 47.2 3 7 10 1,460 9.4-66.1 52.4 10 1,495 6.7-65.7 57.5 10 1,530 11.0-78.0 61 10 1,555 4.8 T 411 10,750 24 ± 3.9 11.0-64.2 47.2 2.8 5.9 47.2 3 7 11 1,565 9.4-66.1 52.4 11 1,600 6.7-65.7 57.5 11 1,630 11.0-78.0 61 11 1,660 5 T 411 13,500 24 ± 6.3 7.5-66.5 57.5 2.8 5.9 47.2 4 6.9 10 1,780 9.1-73.2 61 10 1,805 19.7-94.5 61 9 1,940 9.1-83.9 71.7 9.5 1,875 Not suitable for clampg between the forks. Load ackrest T479. lso available without sideshift, model T401. T411 also available with screw-on forks, model T411. 4.5T411 4.5T411.1 1-888-946-3330 www.lift-tek.com 5
Fork Positioner, wide version T411 with valveblock sideshift dependent on openg range 2 hydraulic functions v Y D E G Class 4 T 411 8,250 24 13.0-99.6 79.9 2.4 4.7 47.2 3 6.6 7.2 10.4 1,775 4.8 T 411 10,750 24 8.7-72.8 61.0 2.4 5.9 47.2 3 7.2 8.2 10.8 1,950 5 T 411 13,750 24 8.7-72.8 61.0 2.4 5.9 47.2 4 7.2 8.0 12.6 2,040 7.1-81.9 73.2 7.7 12.8 2,225 15.0-97.6 73.2 7.7 12.8 2,235 12.2-98.8 79.9 7.5 12.9 2,305 6 T 411 17,250 24 6.7-70.9 61.0 2.4 7.9 47.2 4 7.6 9.2 12.4 2,570 5.1-79.9 73.2 8.9 12.5 2,700 13.0-95.7 73.2 9.0 13.0 2,710 6 T 411 17,250 24 7.9-149.6 133.5 2.0 11.8 47.2 4 7.6 9.0 12.0 3,405 8 T 411 17,250 36 8.3-72.4 61.0 2.8 7.9 47.2 4 9.1 9.0 13.0 3,165 13.0-99.6 78.7 9.0 13.0 3,450 15.7-114.2 94.5 8.0 14.0 3,685 8 T 411 1) 10,750 48 102.4-220.5 177.2 2.8 7.9 47.2 4 9.1 5.0 15.0 5,545 1) lternatively available with third fork the center. Not suitable for clampg between the forks. Load ackrest T479. T411 also available with screw-on forks, model T411. lso available without sideshift, model T401. Fork Positioner, wide version, tegrated T411I with valveblock sideshift dependent on openg range 2 hydraulic functions D E G 4 T 411I 8,250 24 13.0-99.6 79.9 2.4 4.7 47.2 5.5 5.4 1,870 5 T 411I 13,750 24 8.7-72.8 61.0 2.4 5.9 47.2 6.3 7.6 1,850 7.1-81.9 73.2 7.3 1,990 15.0-97.6 73.2 7.3 1,995 5 T 411I 13,750 24 12.2-98.8 79.9 2.4 5.9 47.2 6.3 7.1 2,065 6 T 411I 17,250 24 6.7-70.9 61.0 2.4 7.9 47.2 6.7 8.8 2,330 5.1-79.9 73.2 8.5 2,465 13.0-95.7 73.2 8.5 2,470 6 T 411I 17,250 24 7.9-149.6 133.5 2.0 11.8 47.2 6.7 8.2 3,170 8 T 411I 17,250 36 13.0-99.6 78.7 2.8 7.9 47.2 7.4 7.8 3,140 15.7-114.2 94.5 7.5 3,375 and weight measurements do not take the cheek plates to account. Fork carriage drawgs, roller studs and cha anchors to be supplied by customer if necessary. Not suitable for clampg between the forks. Load ackrest T479. T411I also available with screw-on forks, model T411I. lso available without sideshift, model T401I. 6 1-888-946-3330 www.lift-tek.com
Fork Positioner with round forks T411R with dependent sideshift 2 hydraulic functions S E G Class 1 T 411R 2,750 24 ± 3.9 16.5-54.3 29.5 2.4 47.2 2 5.2 9.6 520 16.5-63.0 38.2 9.1 570 16.9-70.1 44.5 8.8 590 16.1-71.3 47.2 8.7 600 1.5 T 411R 4,250 24 ± 3.9 17.3-63.8 38.2 2.4 47.2 2 5.2 8.3 650 6.3-41.7 38.2 8.5 630 17.7-70.9 44.5 8.1 670 8.3-54.7 47.2 8.1 680 16.9-72 47.2 8.1 685 2 T 411R 5,000 24 ± 3.9 15.7-59.1 38.2 2.8 47.2 2/3 5.6 8.3 695 17.3-68.5 44.5 8.1 720 7.5-48.8 44.5 8.2 695 9.4-60.6 52.4 7.9 745 17.3-76.4 52.4 7.9 745 Can be supplied without sideshift - model T401R. T411R also available with screw-on forks, model T411R. Load ackrest T479. Load ackrest T479 for KUP fork positioners T160 - T466 from 6T H 1 T 479 38.0 19.7 55 1.5 T 479 38.2 19.7 55 2 T 479 45.0 19.7 60 3 T 479 44.5 19.7 60 4 T 479 45.0 19.7 70 5 T 479 52.4 19.7 80 6 T 479 61.0 19.7 105 8 T 479 73.2 19.7 120 10 T 479 81.0 19.7 170 Maximum height H = 39.4 ches, otherwise upon request. 1-888-946-3330 www.lift-tek.com 7
Inside Customer Service and Support E-mail: attachments@lift-tek.com Phone: 864-647-1119 Toll-Free: 888-946-3330 Fax: 864-647-5406 T411 T411R T411R Parts E-mail: parts@lift-tek.com Phone: 864-647-6302 Toll-Free: 877-430-6302 Fax: 864-647-7302 Warranty Information E-mail: warranty@lift-tek.com Toll-Free: 888-946-3330 Fax: 864-647-6195 T411 T411I T411 www.lift-tek.com Material Handlg ttachments Premium Quality and Design