EN W e Rise by Helping Others Our specials, 4th edition 2017. Hands for Children supports children in need.
SPECIALS /// 4th edition 2017 A patented world s first, special offers, and insights into HANDS FOR CHILDREN. The fourth issue of our Specials is an issue with some rather special highlights: HANDS FOR CHILDREN Our sketched illustrations in this issue provide a visual guide to a project that is very close to the hearts of our owners, the Stiegelmann family. This aid project, for which former employees of IKA assemble laboratory equipment on a voluntary basis for sale around the world, was founded many years ago by René Stiegelmann. The profits of more than 720.000 Euros earned in this way over the years have all been donated to provide direct help to underprivileged children. ElectraSyn 2.0 Your Chemistry has Potential is how world renowned scientist and Professor Phil S. Baran presented the ElectraSyn 2.0. The jointly developed device was presented by Phil Baran during a Keynote event at the 254 th American Chemical Society National Meeting in Washington, D.C. Find out more about the device in this issue or go to www.ika.com/gb for the Keynote taping. This edition of our IKA Specials is full of new and attractive offers. Enjoy. 4 /// Electrosynthesis 12 /// Overhead Stirrers 15 /// Mills 20 /// Algaemaster 27 /// Centrifuge 29 /// Dry block heater 32 /// IKA Customizing Center 8 /// Magnetic stirrers 14 /// Disperser 18 /// Rotary Evaporators 24 /// Shakers 28 /// Circulators 30 /// Ovens 3-year warranty* * 2 + 1 years following registration at www.ika.com/register, not including wearing parts. Learn about and order fascinating products from IKA online: www.ika.com/gb. 2 3
The culmination of years of research at the crossroads of engineering and synthesis. PHIL BARAN ElectraSyn 2.0 /// Your chemistry has potential A potentiostat, an analytical device and a stir plate in one: ElectraSyn 2.0 with lifetime warranty. Potentiostat. Analytical capabilities. Stirring abilities: Industry leading and proven stirring technology. Modular design allows for future introduction of electrolysis setups. Standardization for reproducible results. Future proofing: A device that improves over time with firmware updates via USB. /// ElectraSyn 2.0, Ident. No. 0020008980 Nominal voltage (input) 48 VCD Speed control Turning knob Max. current (input) 1.500 ma Display TFT Max. input power 40 W Analog output no Voltage output 30 / 10 V RS 232 interface no Current output 100 ma USB interface EC motor rating output Setting accuracy speed 9 W 50 400 1.500 rpm 10 rpm IP rating IP 40 Permissible ambient temperature + 5 + 40 C Stirring quantity max. per stirring position (H 2 O) 100 ml Dimensions incl. single-vial Adapter (W D H) 130 250 150 mm Stir bar length 10 mm 1,4 kg Operation elements Capacitive touch / Turning knob Power Supply /// ElectraSyn 2.0, Ident. No. 0020008980 Input Output Protection class 100 240 VAC 1,5 A 50 60 Hz 48 VCD 39,84 W LPS (limited power source) II (double insulated) 4 5
ElectraSyn 2.0 packages /// Ready-To-Go package This Ready-To-Go package contains everything you need for your first electrochemical experiment: a potentiostat, a 10 ml glass vial, a holder for the glass vial, a stir plate (aluminum) and a set of electrodes (graphite). lifetime warranty! This modular equipment concept is ideal for countless different set-ups. ElectraSyn 2.0 Ready-To-Go package ElectraSyn 2.0 base unit + + Vial holder + + Single vial, 10 ml, complete + + 2 electrodes (graphite) + + Stir plate (aluminum) + + Magnetic stir bar ElectraSyn 2.0 pro CV package ElectraSyn 2.0 base unit + + Vial holder + + Single vial, 10 ml, complete + + 2 electrodes (graphite) + + Stir plate (aluminum) + + Magnetic stir bar + + Set of CV electrodes: + + CV glassy carbon + + CV Platinum + + Reference electrode Ag / AgCl Ident. No. 0020008980 1,775.00 Ident. No. 0040003261 2,495.00 Patent pending 6 7
IKA Plate (RCT digital) package /// Magnetic stirrer with heating function The IKA Plate (RCT digital) is the all new magnetic stirrer made by IKA, recommended by world-renowned scientists: Phil S. Baran and Jin-Quan Yu. lifetime warranty! IKA uses hardened glass not only because of its particular safety and resistance to chemicals, IKA s choice of glass surfaces for their housings also brings a brand new look to the latest line of magnetic stirrers. Display with hardened and chemically-resistant glass cover panel for maximum safety. Integrated timer / counter for the control of kinetic sensitive reactions and reminders. IKA SmartTemp keep reactions and chemists safe. A stirplate that improves over time with firmware updates via USB. IKA Plate (RCT digital) package IKA Plate magnetic stirrer * + H 38 holding rod + H 16 V support rod + H 44 boss head clamp + LABLIFT /// IKA Plate (RCT digital), Ident. No. 0025005221 Number of stirring positions 1 Stirring quantity max. per stirring position (H2O) 20 l Ident. No. 0010003440 1,094.00 764.00 Motor rating output 9 W 0 / 50 1.500 rpm Heat output 600 W Adjustable safety circuit 50 C 370 C (± K) Included in package /// H 38 holding rod + H 16 V support rod + H 44 boss head clamp + LABLIFT USB / RS 232 interface Set-up plate material Set-up plate dimensions Aluminum alloy Ø 135 mm 160 270 85 mm 2,4 kg * pt 1000 sensor included in scope of delivery. 8 9
lifetime warranty! Save more than 30 %! C-MAG HS 7 control package /// Magnetic stirrer with heating function The C-MAG HS 7 control magnetic stirrer features a square ceramic heating plate. It can stir up to 20 l (H 2 O) and has a speed range of 50 to 1.500 rpm. The lifetime warranty, offered with this product, reflects our belief in the quality of this new magnetic stirrer. Because of its reliability, scientists are now able to concentrate more intensely on their work and experiments. Fast response, clear display that shows all information at a glance. Hardened glass for maximum visibility and chemical resistance. USB / RS 232 interfaces for connecting a PC. Included in package /// H 38 holding rod + H 16 V support rod + H 44 boss head clamp + LABLIFT /// C-Mag HS 7 control, Ident. No. 0020009070 Stirring quantity max. (H2O) 20 l Motor rating output 9 W C-MAG HS 7 control package C-MAG HS 7 control magnetic stirrer * + H 38 holding rod + H 16 V support rod + H 44 boss head clamp + LABLIFT 0 / 50 1.500 rpm Heat output 1.000 W Heating temperature range RT 500 C Heat control Turning knob Stirring bar length 30 80 mm Fixed safety circuit 100 650 C Set-up plate material Glass ceramic Set-up plate dimensions 180 180 mm Ident. No. 0010003443 1,186.00 799.00 * PT 1000 sensor included in scope of delivery. 220 354 88 mm 4 kg 10 11
Ministar 80 control package /// Small footprint, strong performance Eurostar 60 control package /// Electronic overhead stirrer The first compact and high-performance overhead stirrer series with lifetime warranty. Save 31 %! lifetime warranty! Ministar 80 control package Ministar 80 control stirrer + R 1825 stand + R 182 boss head clamp + R 1342 propeller stirrer, 4 bladed + RH 3 strap clamp Eurostar 60 control package Eurostar 60 control stirrer + R 1345 propeller stirrer + R 2723 telescopic stand + R 271 boss head clamp + RH 5 strap clamp Ident. No. 0010003283 1,934.00 1,294.00 Ident. No. 0010003454 3,269.00 2,250.00 /// Ministar 80 control, Ident. No. 0025005610 Included in package /// R 1345 propeller stirrer + R 2723 telescopic stand + R 271 boss head clamp + RH 5 strap clamp Intuitive, touch-sensitive screen for convenient and easy handling and long service life. under nominal load Speed control Speed display Max. torque at stirring shaft 0 / 30 500 rpm Turning knob LCD 80 Ncm Display with hardened and chemically-resistant glass cover panel for maximum safety. Stirring quantity max. (H2O) Viscosity max. 50 l 60.000 mpas Temperature measuring range - 10 C to + 350 C /// Eurostar 60 control, Ident. No. 0004440002 Protection class DIN EN 60529 IP 54 Space-saving: 75 % smaller than our Eurostar line, but still offering torque of up to 80 Ncm. Extension arm (Ø L), without extension arm 13 160 mm 70 130 144 mm 1,72 kg Stirring quantity max. (H2O) Viscosity max. Motor rating input / output 40 l 50.000 mpas 168 W / 131 W 0 / 30 2.000 rpm Chuck range 0,5 10 mm 86 230 267 mm 4,7 kg Permissible ambient temperature 5 40 C Max. torque at stirring shaft Connection for ext. temperature sensor 60 Ncm PT 1000 Protection class DIN EN 60529 IP 40 12 13
T 18 digital package /// Competitively priced disperser A 10 basic /// Analytical mill Save 30 %! Save more than 20 %! T 18 digital package T 18 digital disperser + S 18 N - 19 G dispersing element + R 1826 plate stand + R 182 boss head clamp + RH 3 strap clamp A 10 basic Analytical mil Ident. No. 0010002482 2,511.00 1,749.00 Ident. No. 0025002268 1,620.00 1,249.00 /// T 18 digital, Ident. No. 0003720002 Included in package /// S 18 N - 19 G dispersing element + R 1826 plate stand + RH 3 strap clamp + R 182 boss head clamp Motor rating input / output Volume range (H₂O) Viscosity max. Speed display 500 / 300 W 1 1.500 ml 5.000 mpas 3.000 25.000 rpm LED Speed control Stepless Noise level without tools 75 db(a) Extension arm diameter 13 mm Extension arm length 160 mm Process type batch 87 106 271 mm 2,5 kg Permissible ambient temperature 5 40 C Protection class DIN EN 60529 IP 20 Interfaces no /// A 10 basic, Ident. No. 0025002268* Motor rating input / output Fixed speed range Usable volume max. Power-on time Overload protection Circumferential speed max. Feed hardness max. 300 W / 240 W 25.000 rpm 50 ml 5 min 73 m / s 5 Mohs Grinding chamber material Stainless steel 1.4301 130 145 250 mm 2,9 kg Permissible ambient temperature 5 40 C Protection class DIN EN 60529 IP 41 Voltage 220 240 V Frequency 50 / 60 Hz Voltage Frequency 220 240 V 50 / 60 Hz * A 10.1 Spare stainless steel cutter and A 10.4 Grinding chamber reduction are included in the package. 14 15
Tube Mill 100 control package /// Unique, small batch grinding system Save 21 %! world s first! Tube Mill 100 control package Tube Mill 100 control + mt 40.100 disposable grinding chamber, 40 ml, 100 pcs. Adjustable safety speed and timer. Free /// MT 40.100 disposable grinding chamber, 40 ml, 100 pcs. Special safety features. Ident. No. 0010003447 2,450.00 1,925.00 Optional interval mode available. Accessories (excluded from offer) /// Grinding chamber Quiet operation. Process type /// Tube Mill 100 control, Ident. No. 0020007146 Operating principle Motor rating input / output batch cutting / impact 100 / 80 W Feed grain size max. 10 mm 180 300 212 mm Protection class DIN EN 60529 IP 30 Multilingual OLED display for a clear menu navigation. USB interface for monitoring and documenting all parameters using labworldsoft and updating to the most-up-to-date firmware version. /// MT 40.10 steril (10 ), Ident. No. 0020001984 121.00 Circumferential speed max. Usable volume max. 5.000 25.000 rpm 65 m / s 100 ml USB interface Voltage Frequency 220 240 V 50 / 60 Hz 2 + 1 year following registration at www.ika.com/register. /// MT 100.50 disposable grinding chamber, Ident. No. 0020006984 376.00 Timer 5 s 3 min 2,8 kg Feed hardness max. 5 Mohs /// MMT 40.1 multi-use milling chamber, Ident. No. 0020003165 197.00 16 17
RV 3 V /// The Beginner RV 10 control V-C auto package /// Your lab partner for all solutions The RV 3 V is the perfect entry-level model for manual and standard distillation needs. The RV 3 V with the new 4-litre heating bath can be used at temperatures of up to 90 C. new! five-year warranty! RV 3 V Rotary evaporator RV 10 control V-C auto package RV 10 control V-C auto rotary evaporator + RC 2 basic chiller Ident. No. 0010003326 1,790.00 1,459.00 Ident. No. 0010002866 9,209.00 7,367.00 New locking function for the evaporator piston. Shows red when the evaporator piston is not locked in place. For manual and standard distillation. /// RV 10 control V-C auto, Ident. No. 0008038002 Type of cooling vertical Max. filling volume 3 l Speed display Set speed tolerance < 100 rpm 20 300 rpm Scale 1 ± rpm Set speed tolerance > 100 rpm 1 ± % Lift Stroke /// RV 3 V, Ident. No. 0010003326 manual 150 mm 440 330 530 mm 8 kg Permissible ambient temperature 5 40 C Protection class DIN EN 60529 IP 20 Voltage / Frequency 100 240 V / 50 / 60 Hz Power input 75 W Cooling surface 1.500 cm 2 Motor type Reversible direction of rotation Lift Stroke brushless direct current drive motor 5 280 rpm Motor 140 mm Heating temperature range RT 180 C Heat output Set temperature precision 1.300 W ± 1 K Vacuum controller integrated Timer 500 410 430 mm 21,5 kg Permissible ambient temperature 5 40 C Protection class DIN EN 60529 IP 20 RS 232 interface Voltage / Frequency 220 240 V / 50 / 60 Hz 18 19
IKA Algaemaster 10 control package /// 10 liter Photobioreactor Algae are becoming more and more interesting for different industries. The IKA PBR 10 control Algaemaster is a fully autonomous photobioreactor that provides researchers with the equipment necessary for producing mass densities of sensitive dinoflagellate microalgae. IKA Algaemaster 10 control package IKA Algaemaster 10 control Photobioreactor + RC 2 basic chiller + H.PVC.8 hose Ident. No. 0010003456 30,235.00 25,999.00 Included in package /// RC 2 basic chiller + H.PVC.8 hose /// IKA Algaemaster 10 control, Ident. No. 0020009577 ph measuring accuracy 0,1 ph Type of cooling Circulation ph measurement resolution Viscosity max. Power input Min. usable volume with temperature sensor ph measuring range 0,01 ph 10 100 rpm 100 mpas 375 W 6.000 ml 0 13 ph Connection for external temperature sensor PT 100 800 600 1.000 mm 38 kg Permissible ambient temperature 5 40 C Protection class DIN EN 60529 IP 21 Cooling medium temperature 4 60 C USB / RS 232 interface Usable volume 6.000 10.000 ml Voltage 100 240 V 20 21
4th edition 2017 22 4th edition 2017 23
Loopster digital package /// Rotator KS 3000 ic control package /// Incubator shaker Save more than 20 %! Save 26 %! USB interface to control and document all parameters using labworldsoft software, and for updating your firmware. Wide range of attachments allows using almost all shapes and sizes of vessels. Loopster digital package Loopster digital rotator + DS 6 universal disc + DS 6.1 spare clips, Ø 10 mm, 12 pcs + DS 6.3 spare clips, Ø 16 mm, 12 pcs + DS 6.5 spare clips, Ø 28 mm, 12 pcs KS 3000 ic control package KS 3000 ic control incubator shaker + AS 260.2 fixing clip attachment + AS 2.4 fixing clip Free /// AS 260.2 fixing clip attachment + AS 2.4 fixing clip Ident. No. 0010002491 885.00 649.00 Ident. No. 0010003292 5,883.00 4,339.00 /// Loopster digital, Ident. No. 0004016000 /// KS 3000 ic control, Ident. No. 0003940102 Type of movement Permissible shaking weight (incl. attachment) rotating 2 kg Max. turntable tilt angle 90 5 80 rpm 300 300 360 mm 3 kg Permissible ambient temperature 4 50 C Protection class DIN EN 60529 IP 21 Voltage 100 240 V Frequency 50 / 60 Hz DC 24 V Current consumption 1.000 ma Type of movement Shaking diameter Permissible shaking weight (incl. attachment) Motor rating input / output orbital 20 mm 7,5 kg 45 / 10 W Temperature range RT - 10 C to + 80 C Permissible ON time 100 % 10 500 rpm Timer Timer display Process type 1 999 h LED Timer and continuous operation 330 330 258 mm 37 kg Permissible ambient temperature 15 32 C 24 25
Lab dancer /// Vortex mixer IKA mini G /// Centrifuge Save 35 %! IKA mini G special Ident. No. 0003958000 298.00 194.00 Lab dancer Vortex mixer Quiet operation. Integrated quick stop. Ident. No. 0003365000 215.00 175.00 Touch keypad for easy operation. Rotor exchangeable without tools. Adjustable digital timer. Special safety features. /// Lab dancer, Ident. No. 0003365000 /// IKA mini G, Ident. No. 0003958000 Type of movement Shaking diameter Permissible shaking weight (incl. attachment) Motor rating input / output Speed display orbital 4,5 mm max. 50 ml (1 test tube) 1,2 / 0,8 W 2.800 rpm (fixed) no Timer display no Process type touch operation Dimensions (Ø H) 100 70 mm 0,55 kg Permissible ambient temperature 5 40 C Capacity 8 2,0 ml Permissible density 1,2 kg / dm 3 Centrifugal acceleration (RCA) 2.000 G Max. kinetic energy 20 Nm Motor rating input / output 12 / 8 W Speed Reversible direction of rotation 6.000 rpm (non-variable) no 155 175 105 mm 1,4 kg 26 27
CBC 5 basic and control /// High-performance refrigerated and heating circulators Dry Block Heater 1 package /// Safe and precise temperature control Save 27 %! Save 25 %! DB 1.3 package DBH 1 + Single block insert DB 1.3 CBC 5 basic Refrigerated and heating circulator CBC 5 control Refrigerated and heating circulator Ident. No. 0010003449 936.00 699.00 Ident. No. 0004165000 4,293.00 3,116.00 Ident. No. 0004167000 4,770.00 3,482.00 Free /// Single block insert DB 1.3 * CBC 5 basic, Ident. No. 0004165000 CBC 5 control, Ident. No. 0004167000 Appliance type Bath circulator Usable volume 2 l Safety class III (FL) Pump capacity, pressure 0,61 bar Heat output (230 V) 2.500 W Pump capacity, suction 0,45 bar Chilling capacity (at + 20 C) Coolant 350 W I 400 W at 3.200 rpm R 134a Working temperature range - 25 C to + 200 C Operating temperature range (with external cooling) Temperature display - 30 C* to + 200 C LED TFT Display resolution 0,1 C 0,01 C Set temperature resolution 0,1 C Temperature stability in acc. with DIN 12876 ± 0,02 K ± 0,01 K Max. flow rate 31 l / min 275 490 690 mm 39,5 kg Permissible ambient temperature 5 32 C USB / RS 232 interface Connection for an external PT 100 sensor Connector thread size Multi I/O interface included M 16x1 no /// Dry Block Heater 1, Ident. No. 0004025102 Number of blocks 1 Heat output 250 W Temperature range RT + 5 C 120 C Display Heat control accuracy LED ± 1 K Connection for external temperature sensor DIN 12878 Control accuracy with sensor Material of the blocks Timer ± 1 K Aluminum alloy 1 min 99 h 59 min 151 228 73 mm Filling volume 5 7 l * - 30 C achievable at 2.000 rpm * used for microtubes (1.5 ml), Pore size: Ø 11.1 mm, No. of holes: 20, Hole depth: 39.1 mm 28 29
Ovens /// Drying ovens The IKA Oven is a universal drying oven for tempering, drying, aging, and heating tasks in the laboratory. Ideal for a wide range of applications in industry, schools / universities, research, quality control, and the sciences. new! Save 23 %! IKA Oven 125 basic dry IKA Oven 125 basic dry with glassdoor Ident. No. 0020003215 1,890.00 1,529.00 Ident. No. 0020003956 2,190.00 1,685.00 The drying oven has an electronically adjustable ventilation flap. A clearly laid-out operating menu makes the oven particularly easy to use. /// IKA Oven 125 basic dry, Ident. No. 0020003215 IKA Oven 125 basic dry with glassdoor, Ident. No. 0020003956 The universal drying oven has an integrated timer. The oven has an adjustable temperature limiter. Working temperature range RT + 5 to + 250 C Heat output Display Max. number of trays 6 Max. loading weight per tray 2.400 W (230 V / 50 Hz) 1.500 W (115 V / 60 Hz) 1.134 W (100 V / 60 Hz) LED 30 kg Glass door no Protection class DIN EN 60529 IP 20 Frequency 50 / 60 Hz 55 kg Interface USB 30 31
Customizing Center IKA Application Support It is important that IKA products perform in real laboratory applications. We have a special program of product solutions that are customized to your individual needs. If you cannot find the right device in our standard product range, please send us the details of the specification you need using the online form. Our team will check the feasibility of the specification and offer you a solution. Please visit www.ika.com/gb to have a look at the product modification requests that we have already implemented. Our Application Center spans 400 m² and is equipped with the most modern facilities for presenting and testing laboratory equipment and processes. The Center brings us even closer to our customers and improves our service. If you are interested, you can use our facilities to test processes that include stirring, shaking, dispersing, grinding, heating, analysis and distillation. Call us at +44 1865 986 162 or send an email to applicationsupport@ika.de. Our Application Center covers 400 m² and offers modern facilities for presenting and testing laboratory devices. Send us your sample. We will run a test with the suitable device within 48 hours. We would be happy to help you find the perfect device for your application. Interested individuals and customers can test processes including: stirring, shaking, dispersing, milling, heating, analyzing and distilling. 32 33
4th edition 2017 34 4th edition 2017 35
EN IKA England Ltd. 1 Fountain House, John Smith Drive, Oxford Business Park, Oxford, Oxon OX4 2JY, United Kingdom Phone: +44 1865 986 162 email: sales.england@ika.com /// Worldwide Germany IKA-Werke GmbH & Co. KG Phone: +49 7633 831-0 email: sales@ika.de USA IKA Works, Inc. Phone: +1 910 452-7059 email: sales@ika.net JAPAN IKA Japan K.K. Phone: +81 6 6730 6781 email: info_japan@ika.ne.jp KOREA IKA Korea Ltd. Phone: +82 2 2136 6800 email: info@ika.kr INDIA IKA India Private Limited Phone: +91 80 26253 900 email: info@ika.in BRASIL IKA Brasil Phone: +55 19 3772-9600 email: sales@ika.net.br 201709_Specials04Lab_EN_IWU_GBP Malaysia IKA Works (Asia) Sdn Bhd Phone: +60 3 6099-5666 email: sales.lab@ika.my CHINA IKA Works Guangzhou Phone: +86 20 8222 6771 email: info@ika.cn Poland IKA Poland Sp. z o.o. Phone: +48 22 201 99 79 email: sales.poland@ika.com /// onlineshop Discover and order the fascinating products of IKA online: www.ika.com/gb. /// social Media IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide Prices and technical specifications may be changed without prior notice. Prices are valid October 1 st through December 31 st, 2017. All prices are subject to VAT.