EFFECTIVE: MARCH 8, 2017 Cargo/Load Management Options Exterior Options Reciever Hitch CL-V & ICC Bumper 14 Receiver Hitch CL-V Drawbars 14 Receiver Hitch CL-IV & ICC Drawbars 15 ICC Bumper 15 Tailskirt Delete 16 GCDH Tailgates 16 Cargo Tie-Downs 1 PVMX Over Cab Material Rack 21 Rear Pockets and Rub Rail for Heavy Hauler 19 Rope Hooks 18 Side Rub Rails for Westerner Platforms 10 Spare Tire Retainer 13 Underbody Sliding (Winch) Tie-Down Channel 2 Underbody Tie-Down Rails 2 Back Panel Enclosures (for Cutaway Applications) 20 Apitong Flooring 6 Delete Wood Floor 6 Steel Floor Options 5 PB (Poly Board) Floor Option 20 Prime Paint / No Paint on Wood Floor 3 Steel Overlay 5 Access Door for Gooseneck Hitch 12 Gooseneck Hitch System 12 Lighting Options Platform LED Light Kits 17 Mounting Options INDEX Category Option Page # Bumper & Hitch Option Bulk U-Bolt Assemblies 17 Platform Mounting Kits 11 Toolbox & Mud Flap Mounting Bracket 13 Optional Cross Sill Spacing 4 4" Structural Cross Sills 4 Gussets All Cross Sills 3 Standard Long Sills Loose 7 Optional Long Sills Installed 8 Optional Long Sills Loose 9 Long Sills Delete 9 Optional Long Sill Spacing 7 PAGE Index
CARGO TIE-DOWN D-RING, SWIVEL STYLE, 2000 POUND RATED, CARGO TIE-DOWNS LOOSE OR INSTALLED IN STEEL, OR WOOD FLOORS. D-RING OPENING IS 3.25" LONG X 1.50" HIGH AT MIDPOINT. THE NUMBER OF CARGO TIE-DOWNS AND THE LOCATION IS PREDESIGNED FOR THE INSTALLED OPTION, AND THAT INFORMATION CAN BE FOUND UNDER THE "SPECIFICATIONS TAB". ONE CARGO TIE-DOWN CUP AND MOUNTING SUPPORT IS PROVIDED FOR EACH UNIT SHIPPED LOOSE. AVAILABLE FOR ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTION: - NOT AVAILABLE ON PG, PGN, OR GCHD MODELS CARGO TIE-DOWN - CONTINUED WOOD FLOOR 77501500 INSTALLED, 7'-10' PLATFORM, 80, 94 OR 96 SERIES WITH STANDARD CROSS 77501518 INSTALLED, 7'-10' PLATFORM, 80, 94 OR 96 SERIES WITH OPTIONAL 12" CROSS 77501526 INSTALLED, 11'-14' PLATFORM, 94, 96 OR 102 SERIES WITH STANDARD CROSS 77501534 INSTALLED, 11'-14' PLATFORM, 94 OR 96 SERIES WITH OPTIONAL 12" CROSS 77501542 INSTALLED, 15'-18' PLATFORM, 94, 96 OR 102 SERIES WITH STANDARD CROSS 77501559 INSTALLED, 20'-22' PLATFORM, 94, 96 OR 102 SERIES WITH STANDARD CROSS 77501567 INSTALLED, 24'-26' PLATFORM, 94, 96 OR 102 SERIES WITH STANDARD CROSS OPTION NO. APPLICATION PRICE 85347201 85347219 85347235 85347227 CARGO TIE-DOWNS LOOSE LOOSE, FOR 24" CROSS, PRICE EACH LOOSE, FOR 18" CROSS, PRICE EACH LOOSE, FOR 16" CROSS, PRICE EACH LOOSE, FOR 12" CROSS, PRICE EACH 77501609 77501617 77501625 77501633 77501641 77501658 77501666 STEEL FLOOR INSTALLED, 7'-10' PLATFORM, 80, 94 OR 96 SERIES WITH STANDARD CROSS INSTALLED, 7'-10' PLATFORM, 80, 94 OR 96 SERIES WITH OPTIONAL 12" CROSS INSTALLED, 11'-14' PLATFORM, 94, 96 OR 102 SERIES WITH STANDARD CROSS INSTALLED, 11'-14' PLATFORM, 94 OR 96 SERIES WITH OPTIONAL 12" CROSS INSTALLED, 15'-18' PLATFORM, 94, 96 OR 102 SERIES WITH STANDARD CROSS INSTALLED, 20'-22' PLATFORM, 94, 96 OR 102 SERIES WITH STANDARD CROSS INSTALLED, 24'-26' PLATFORM, 94,96 OR 102 SERIES WITH STANDARD CROSS Option No. APPLICATION PRICE Option No. APPLICATION PRICE Page 1
UNDERBODY TIE DOWN RAILS 3/8" X 2" STEEL TIE DOWN RAIL IS WELDED TO THE UNDERSIDE OF ALL CROSS SILLS, ONE EACH SIDE OF PLATFORM, RUNNING FROM THE FIRST CROSS SILL TO THE LAST CROSS SILL. THE TIE DOWN RAIL IS LOCATED 6.50" IN FROM THE OUTSIDE OF THE PLATFORM SIDE RAIL. AVAILABLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - NOT AVAILABLE ON GCDH MODELS - NOT AVAILABLE ON PHHJ MODELS - NOT AVAILABLE ON PGN MODELS UNDERBODY SLIDING TIE DOWN CHANNEL FORMED TIE DOWN CHANNEL IS WELDED TO THE CURBSIDE OF THE CROSS SILLS. THE FLAT RAIL IS WELDED TO THE STREET SIDE OF THE PLATFORM, IN MOST CASES THE TIE DOWN AND CHANNEL RAILS ARE ATTACHED FROM THE FIRST TO THE LAST CROSS SILL (ISOLATED CASES LEAVE THE FRONT AND / OR REAR CROSS SILL OPEN). THE TIE DOWN RAIL IS LOCATED AS SHOWN FROM THE OUTSIDE OF THE PLATFORM SIDE RAIL EXCEPT FOR PHH MODELS WHICH ARE 10.5". THE SLIDING TIE DOWN CHANNEL IS DESIGNED FOR USE WITH "BUYERS" PART NUMBER 1903035 STORABLE 4" WINCH. CONSULT THE BUYERS CATALOG. AVAILABLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - NOT AVAILABLE ON GCDH MODELS - NOT AVAILABLE ON PLATFORMS UNDER 9' - NOT AVAILABLE ON PGN PLATFORMS 77502011 77502003 * PRICE PER FOOT INSTALLED, ALL PLATFORMS WITH STANDARD CROSS * 77502037 INSTALLED, ALL PLATFORMS WITH STANDARD CROSS * INSTALLED, ALL PLATFORMS WITH OPTIONAL 12" CROSS * 77502045 INSTALLED, ALL PLATFORMS WITH OPTIONAL 12" CROSS * Option No. APPLICATION PRICE * Option No. * PRICE PER FOOT APPLICATION PRICE * Page 2
PRIME PAINT / NO PAINT ON WOOD FLOOR THE BLACK TOPCOAT IS DELETED, AND THE PLATFORM IS PROVIDED WITH A PRIME PAINT FINISH. PREMASKED PRODUCT DECALS WILL BE ATTACHED TO THE PRIME PAINTED PLATFORM TO ELIMINATE THE NEED FOR MASKING WHEN THE TOPCOAT IS APPLIED. AVAILABLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - NOT APPLICABLE TO PGN OR GCDH MODELS GUSSETS ALL CROSS SILLS GUSSETS INSTALLED ON ALL CROSS SILLS ON THE PLATFORM. THE ONLY EXCEPTION IS ON 80 SERIES PLATFORMS IN 7 AND 8 FOOT LENGTHS WHICH HAVE A SHALLOW CROSS SILL OVER THE TIRE AREA FOR CLEARANCE. A GUSSET WILL NOT BE INSTALLED AT THIS LOCATION. AVAILABLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - PVMX-738A WITH WOOD FLOOR HAS CROSS SILLS ON 24 INCH CENTERS AND ALREADY HAS GUSSETS ON ALL CROSS SILLS - NOT AVAILABLE ON GCDH MODELS - NOT AVAILABLE ON PGN MODELS * PRICE PER FOOT 77500304 PRIME PAINT IN LIEU OF STANDARD PAINT N/C 77500445 INSTALLED, PLATFORMS WITH STANDARD CROSS 77500312 NO PAINT ON WOOD FLOOR OPTION N/C 77500452 INSTALLED, PLATFORMS WITH OPTIONAL 12 INCH CROS SILL Option No. APPLICATION PRICE Option No. APPLICATION PRICE* Page 3
EFFECTIVE: AUGUST 24, 2016 OPTIONAL CROSS CROSS SILLS WILL BE SPACED ON 12 INCH CENTERS ON ALL APPLICABLE PLATFORMS IN LIEU OF THE STANDARD SPACING. OPTIONAL SPACING IS AVAILABLE ON ALL 12 FOOT AND SHORTER VALUE-MASTER-X SERIES AND 12 FOOT AND SHORTER PHHJ MODEL PLATFORMS. 4" STRUCTURAL CROSS SILLS 4" X 5.4 (LBS. PER FOOT) STRUCTURAL CHANNEL CROSS SILLS IN LIEU OF THE STANDARD FORMED CROSS SILLS. 4" STRUCTURAL CROSS SILLS ARE AVAILABLE ON WOOD FLOOR PLATFORMS ONLY. IF 4" STRUCTURAL CROSS SILLS ARE DESIRED WITH A STEEL FLOOR, ORDER A WOOD FLOOR WITH A STEEL OVERLAY. - NOT APPLICABLE TO PHHJ, PGN OR WESTERNER MODELS - NOT COMPATIBLE WITH THE FOLLOWING OPTIONS: - LONG SILLS DELETE - OPTIONAL LONG SILLS INSTALLED - STANDARD LONG SILLS LOOSE - OPTIONAL LONG SILLS LOOSE - APITONG WOOD FLOOR * PRICE PER FOOT * PRICE PER FOOT 77500460 INSTALLED, 80 SERIES PLATFORMS WITH STANDARD (24") CROSS SILL SPAC 77500700 77500718 77500726 77500734 77500742 77500759 80 SERIES PLATFORM WITH STEEL FLOOR, 7', 8' OR 9' LONG 80 SERIES PLATFORM WITH WOOD FLOOR, 7' OR 8' LONG 80 SERIES PLATFORM WITH WOOD FLOOR, 9' OR 10' LONG 80 SERIES PLATFORM WITH STEEL FLOOR, 10' LONG 94 & 96 SERIES PLATFORM WITH STEEL OR WOOD FLOOR, 8' OR 9' LONG 94 & 96 SERIES PLATFORM WITH STEEL OR WOOD FLOOR, 10', 11' AND 12' LONG, EXCEPT PHHJ 77500478 77500486 77500494 77500437 INSTALLED, 80 SERIES PLATFORMS WITH OPTIONAL (12") CROSS SILL SPACIN INSTALLED, 94 & 96 SERIES PLATFORMS, 8 TO 12 FOOT LONG, WITH STANDARD (18") CROSS INSTALLED, 94 & 96 SERIES PLATFORMS, 8 TO 12 FOOT LONG, WITH OPTIONAL (12") CROSS INSTALLED, 94 & 96 SERIES PLATFORMS, 13 TO 26 FOOT LONG, WITH STANDARD (12") CROSS 77500825 PHHJ SERIES PLATFORMS * 77500502 INSTALLED, 102 SERIES PLATFORMS W/ STANDARD (12") CROSS SILL SPACIN Option No. APPLICATION PRICE Option No. APPLICATION PRICE * Page 4
STEEL FLOOR OPTIONS 7 GA SMOOTH STEEL OR 3/16" OR 1/4" TREADPLATE INSTALLED IN LIEU OF THE STANDARD STEEL FLOOR. STEEL FLOOR OPTIONS ARE AVAILABLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - 1/4" TREADPLATE IN LIEU OF 1/8" ON ANY 80 SERIES PLATFORM - NOT AVAILABLE ON PG, PGN OR GCDH MODELS (STEEL FLOOR STD.) PLATFORM SERIES 94 SERIES 96 SERIES 102 SERIES STEEL OVERLAY TREADPLATE OR SMOOTH STEEL OVERLAY INSTALLED ON TOP OF THE WOOD FLOOR. AVAILABLE ON ALL WOOD PLATFORM MODELS WITH THE FOLLOWING EXCEPTION: - NOT AVAILABLE ON ANY 80 SERIES PLATFORMS ADDITIONAL WEIGHT LB/FT 10GA S.S. 7GA S.S. 1/8" T.P. 43.88 45.00 47.81 59.75 3/16" T.P. 48.04 67.93 61.28 49.28 69.68 65.1 52.35 74.03 *PRICE PER FOOT 77500908 77500916 77500924 77500932 77500650 INSTALLED, 80 SERIES SMOOTH, 7 GA IN LIEU OF 11 GA INSTALLED, 80 SERIES TREADPLATE, 3/16" IN LIEU OF 1/8" INSTALLED, 94/96 SERIES SMOOTH, 7 GA IN LIEU OF 10 GA INSTALLED, 94/96 SERIES TREADPLATE, 3/16" IN LIEU OF 1/8" INSTALLED, 94/96 SERIES TREADPLATE, 1/4" IN LIEU OF 1/8" *PRICE PER FOOT 77501054 77500940 77500957 77500668 INSTALLED, 94/96 SERIES TREADPLATE, 1/4" IN LIEU OF 3/16" INSTALLED, 102 SERIES SMOOTH, 7 GA IN LIEU OF 10 GA INSTALLED, 102 SERIES TREADPLATE, 3/16" IN LIEU OF 1/8" INSTALLED, 102 SERIES TREADPLATE, 1/4" IN LIEU OF 1/8" 77500601 77500619 77500627 77500635 INSTALLED, 10 GA HIGH STRENGTH SMOOTH STEEL INSTALLED, 7 GA SMOOTH STEEL INSTALLED, 1/8" TREADPLATE INSTALLED, 3/16" TREADPLATE Option No. APPLICATION PRICE* Option No. APPLICATION PRICE* Page 5
DELETE WOOD FLOOR DELETE THE STANDARD DENSE YELLOW PINE WOOD FLOOR FROM WOOD FLOOR PLATFORM MODELS. THE PLATFORM WILL BE SHIPPED WITH STANDARD CROSS SILLS TO ACCOMMODATE BOARDS 1.50 INCHES THICK. APPLICABLE TO ALL PLATFORM MODELS WITH WOOD FLOORS. APITONG WOOD FLOOR APITONG WOOD FLOOR INSTALLED IN LIEU OF THE STANDARD NUMBER 1 DENSE YELLOW PINE WOOD FLOOR. BOARDS ARE 1.38" X 5.50" FACE (ACTUAL FINISHED DIMENSIONS) CENTER MATCHED TONGUE AND GROOVE. THE TOP OF THE FLOOR WILL BE FINISH PAINTED BLACK. AVAILABLE ON ALL WOOD FLOOR PLATFORM MODELS. 77500676 77500684 77500692 DELETE, 80 SERIES PLATFORMS DELETE, 94 & 96 SERIES PLATFORMS DELETE, 102 SERIES PLATFORMS *PRICE PER FOOT 77501104 77501138 77501112 77501146 77501120 INSTALLED, 80 SERIES PLATFORMS W/ STANDARD (24") CROSS INSTALLED, 80 SERIES PLATFORMS W/ OPTIONAL (12") CROSS INSTALLED, 94 & 96 SERIES PLATFORMS, 8 TO 26 FEET LONG WITH STANDARD CROSS INSTALLED, 94 & 96 SERIES PLATFORMS, 8 TO 12 FEET LONG, WITH OPTIONAL (12") CROSS INSTALLED, 102 SERIES PLATFORMS, 14 TO 26 FEET LONG, WITH STANDARD (12") CROSS Option No. APPLICATION PRICE* Option No. APPLICATION * PRICE PER FOOT PRICE* Page 6
OPTIONAL LONG STANDARD LONG SILLS INSTALLED AT OPTIONAL SPACING TO ACCOMMODATE CHASSIS OTHER THAN THE STANDARD 34 INCH WIDTH (STD. 38" ON 7 AND 8 FOOT PLATFORMS). AVAILABLE ON ALL PLATFORM MODELS AND LANDSCAPERS WITH THE FOLLOWING EXCEPTIONS: - NOT AVAILABLE ON GCDH, PG & PGN MODELS - NOT COMPATIBLE WITH 4" STRUCTURAL CROSS SILL OPTION - NOT COMPATIBLE WITH LONG SILL DELETE OPTION - NOT COMPATIBLE WITH STANDARD LONG SILL LOOSE OPTION - NOT COMPATIBLE WITH OPTIONAL LONG SILL LOOSE OPTION - NOT COMPATIBLE WITH OPTIONAL LONG SILL INSTALLED OPTION - NOT COMPATIBLE WITH GUSSETS ON ALL CROSS SILLS OPTION - NOT COMPATIBLE WITH OPTIONAL CROSS OPTION STANDARD LONG SILLS LOOSE PLATFORM WILL BE SHIPPED WITH NO LONG SILLS OR GUSSETS INSTALLED. THE STANDARD LONG SILLS AND GUSSETS WILL BE SHIPPED SEPARATELY FOR ATTACHMENT BY THE FINAL INSTALLER. AVAILBLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - NOT AVAILABLE ON GCDH AND PGN MODELS - NOT AVAILABLE IN CONJUNCTION WITH APITONG WOOD FLOOR 77500528 INSTALLED, 27.5" SPACING 77500536 INSTALLED, 29.5" SPACING 77500544 INSTALLED, 31.5" SPACING 77500551 77500569 77500577 77500585 77500593 77501336 INSTALLED, 33.0" SPACING INSTALLED, 33.5" SPACING INSTALLED, 34.0" SPACING APPLICABLE TO 7' & 8' PLATFORMS INSTALLED, 40.5" SPACING APPLICABLE TO 7' PLATFORMS INSTALLED, 42.0" SPACING APPLICABLE TO FORD E350, E450 INSTALLED, 29.5" SPACING APPLICABLE TO PLB-090B & PLB-110B 77500205 77500213 PLATFORMS UP TO AND INCLUDING 12 FEET PLATFORMS 13 FEET AND LONGER Option No. APPLICATION PRICE Option No. APPLICATION PRICE Page 7
EFFECTIVE: JUNE 24, 2016 OPTIONAL LONG SILLS INSTALLED OPTIONAL LONG SILLS WILL BE INSTALLED ON THE PLATFORM IN LIEU OF THE STANDARD LONG SILLS. MOUNTING KITS ARE NOT INCLUDED WITH THE LONG SILLS INSTALLED, SEE MOUNTING KIT OPTION PAGE. AVAILABLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - NOT AVAILABLE AS STANDARD OPTION WITH APITONG WOOD FLOOR (CONTACT QUOTING DEPARTMENT FOR QUOTE) SEE PRICE PAGES FOR PGN MODEL LONG SILL OPTIONS 77500080 77500189 77500064 77500098 OPTIONAL LONG SILLS INSTALLED - CONTINUED RAM SPECIFIC APPLICATIONS: INSTALLED, FORMED LONG SILLS TO FIT 1996 & PRIOR DAKOTA INSTALLED, FORMED BOLT-ON LONG SILLS FOR 2003-2013 RAM 56" CA CHASSIS, VALID 8' PVMX AND PG PLATFORMS. N/A WITH BHR BULKHEAD INSTALLED, FORMED BOLT-ON LONG SILLS FOR 1997-2002 RAM BR SERIES 56" CA CHASSIS, VALID 8' PVMX AND PG PLATFORMS. N/A WITH BHR BULKHEAD INSTALLED, 7 GA. FORMED BOLT-ON LONG SILLS IN LIEU OF 4"-4.5# OR 5"- 6.7# CHANNEL ON 1997-2002 RAM BR CHASSIS, VALID 9-12 FT PLATFORM Option No. APPLICATION PRICE 77500072 77500262 77500056 GM SPECIFIC APPLICATIONS: INSTALLED, FORMED BOLT-ON LONG SILLS FOR 1988-2000 MODEL YEAR GM C/K SERIES 56" CA TAPERED FRAME CHASSIS, VALID 8' PVMX, AND PG ONLY. N/A WITH BHR BULKHEAD INSTALLED, FORMED BOLT-ON LONG SILLS TO FIT GM C/K SERIES 42" CA 2001 & NEWER CHASSIS. VALID FOR 7' PVMX PLATFORMS ONLY. N/A WITH BHR BULKHEAD INSTALLED, FORMED BOLT-ON LONG SILLS TO FIT GM C/K SERIES 56" CA, 1999-2000 SILVERADO AND ALL 2001 & NEWER CHASSIS. VALID FOR 8' PVMX & PG PLATFORMS ONLY. N/A WITH BHR BULKHEAD Option No. APPLICATION PRICE 77500007 77500015 77500031 77500023 * * * * GENERAL CHASSIS APPLICATIONS: * PRICE PER FOOT INSTALLED, 5"-6.7# STRUCTURAL CHANNEL IN LIEU OF 4"-5.4# CHANNEL ON 7, 8, 9, & 10 FOOT 80 SERIES PLATFORMS; 8, 9 & 11 FOOT & PG MODELS INSTALLED, 6"-8.2# STRUCTURAL CHANNEL IN LIEU OF 5"-6.7# CHANNEL ON 8, 9, 10, 11 & 12 FOOT GCDH MODELS, ALL 94 & 96 SERIES PLATFORMS, PLB "B" LANDSCAPER MODELS INSTALLED, 7"-9.8# STRUCTURAL CHANNEL IN LIEU OF 5"-6.7# CHANNEL ON 9, 10, 11 & 12 FOOT 94 & 96 SERIES PLATFORMS, GCDH MODELS 9-12 FOOT, & PLB "B" LANDSCAPER MODELS INSTALLED, 8" X 11.5# STRUCTURAL CHANNEL IN LIEU OF 7"-9.8# CHANNEL ON 13 FOOT & LONGER 94, 96 & 102 SERIES PLATFORMS. N/A TO GCDH Option No. APPLICATION PRICE * * PRICE PER FOOT Page 8
EFFECTIVE: JUNE 24, 2016 LONG SILL DELETE STANDARD LONG SILLS ARE DELETED FROM THE PLATFORM, AND THE STANDARD GUSSETS ARE SHIPPED LOOSE IN A KIT. LONG SILL DELETION IS AVAILABLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - NOT AVAILABLE ON PGN OR GCHD MODELS - NOT AVAILABLE IN CONJUNCTION WITH APITONG WOOD FLOOR OPTIONAL LONG SILLS LOOSE PLATFORM WILL BE SHIPPED WITH NO LONG SILLS OR GUSSETS INSTALLED. THE OPTIONAL LONG SILLS AND GUSSETS WILL BE SHIPPED SEPARATELY FOR ATTACHMENT BY THE FINAL INSTALLER. DEDICATED LOOSE LONG SILL OPTIONS FOR 8 FOOT PLATFORMS ARE ALSO LISTED BELOW. MOUNTING KITS ARE NOT INCLUDED WITH THE LONG SILLS. AVAILABLE ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - NOT AVAILABLE ON PG, PGN, PHHJ OR GCDH MODELS - NOT AVAILABLE IN CONJUNCTION WITH APITONG WOOD FLOOR 77500403 77500411 77500429 DELETE, 80 SERIES PLATFORMS WITH 4" STRUCTURAL LONG SILLS AND 8'-11' PG MODELS, PRICE PER FOOT OF NOMINAL LENGTH DELETE, 94, 96 & 102 SERIES PLATFORMS 8'-12' WITH 5" STRUCTURAL LONG SILLS OR 4" FORMED LONG SILLS, AND 12'-14' PG MODEL, PRICE PER FOOT OF NOMINAL LENGTH DELETE, 94, 96 & 102 SERIES PLATFORMS 13'-26' WITH 7" STRUCTURAL LONG SILLS, PRICE PER FOOT OF NOMINAL LENGTH LOOSE, FORMED LONG SILLS FOR 8 FOOT PLATFORM ON 2003 OR NEWER RAM BR SERIES 56" CA CHASSIS. NOT COMPATIBLE WITH BHR BULKHEAD LOOSE, FORMED LONG SILLS FORMED LONG SILLS FOR 8 FOOT PLATFORM ON 1997-2002 RAM BR SERIES 56" CA CHASSIS. NOT COMPATIBLE WITH BHR BULKHEAD LOOSE, FORMED LONG SILLS FOR 8 FOOT PLATFORM ON 1988-2000 C/K SERIES 56" CA CHASSIS WITH TAPERED FRAME. NOT COMPATIBLE WITH BHR BULKHEAD LOOSE, DEDICATED LONG SILLS FOR 8 FOOT PLATFORM ON DODGE DAKOTA LOOSE, FORMED LONG SILLS FOR 7 FOOT PLATFORM ON 2001 OR NEWER GM C/K SERIES 42" CA CHASSIS. NOT COMPATIBLE WITH BHR BULKHEAD. FITS PVMX ONLY. LOOSE, FORMED LONG SILLS FOR GM C/K 56" CA 99-00 SILVERADO AND ALL 2001 AND NEWER CHASSIS.VALID FOR 8' PVMX & PG PLATFORMS ONLY. N/A WITH BHR BULKHEADS. Option No. APPLICATION PRICE LOOSE, 5" X 6.7# STRUCTURAL CHANNEL IN LIEU OF 4" X 5.4# CHANNEL ON 8, 9 AND 10 FOOT 80 SERIES PLATFORMS, PG AND PGH 8, 9, & 11 FT. LOOSE, 6" X 8.2# STRUCTURAL CHANNEL IN LIEU OF 5" X 6.7# CHANNEL ON 9, 10, 11 AND 12 FOOT LONG 94 AND 96 SERIES PLATFORMS LOOSE, 7" X 9.8# STRUCTURAL CHANNEL IN LIEU OF 5" X 6.7# CHANNEL ON 9, 10, 11 AND 12 FOOT LONG 94 AND 96 SERIES PLATFORMS LOOSE, 8" X 11.5# STRUCTURAL CHANNEL IN LIEU OF 7" X 9.8# CHANNEL ON 13 FOOT AND LONGER 94, 96 AND 102 SERIES PLATFORMS Option No. APPLICATION PRICE* Option No. APPLICATION PRICE* * PRICE PER FOOT * PRICE PER FOOT 77500197 77500163 77500130 77500148 77500270 77500171 77500106 77500114 77500155 77500122 Page 9
SIDE RUB RAILS - PG "B" PLATFORMS RUB RAIL FOR SIDES OF WESTERNER PLATFORMS (.25" X 2.00") IS WELDED ON EACH SIDE. LEFT AND RIGHT SIDE RAILS ARE SYMMETRICAL. RUB RAIL IS.75" OFF SIDE RAIL (96" WIDTH OVERALL). THIS PANEL INTENTIONALLY LEFT BLANK 77500809 85411908 85411916 85411924 85411932 INSTALLED, RUB RAIL EACH SIDE, PG MODELS * PRICE PER FOOT LOOSE, RUB RAIL KIT, WELD / BOLT-ON SIDES OF PG-83 & 838 LOOSE, RUB RAIL KIT, WELD / BOLT-ON SIDES OF PG-93 LOOSE, RUB RAIL KIT, WELD / BOLT-ON SIDES OF PG-113 LOOSE, RUB RAIL KIT, WELD / BOLT-ON SIDES OF PG-123 Option No. APPLICATION PRICE * PRICE PER FOOT Page 10
EFFECTIVE: JUNE 24, 2016 PLATFORM MOUNTING KITS PLATFORM MOUNTING KITS TO ACCOMMODATE SPECIFIC PLATFORM AND CHASSIS COMBINATIONS. KITS FOR CONVENTIONAL U-BOLT MOUNTING WILL INCLUDE THE APPROPRIATE NUMBER OF U-BOLTS AND SHEAR PLATES. KITS INCLUDE INSTALLATION INSTRUCTIONS WHERE APPLICABLE. PLATFORM MOUNTING KITS - CONTINUED NOT APPLICABLE TO PGN SERIES PLATFORMS, MOUNTING KITS INCLUDED 80412935 80412745 80412752 80412216 80412257 80412265 80412273 80411952 11 THROUGH 12 FOOT PLATFORMS WITH 3" FORMED LONG SILLS MOUNTED ON 1997-2002 RAM 84 CA CHASSIS. LONG SILLS ARE PRE-PUNCHED AND BOLT TO CHASSIS 9-12 FOOT PLATFORMS WITH 5" STRUCTURAL LONG SILLS, 1.5" CUSHION STRIP ON GM, 1999 & NEWER FORD or 2007 & NEWER RAM 60-84CA CHASSIS CABS. KIT INCLUDES (2)-16", (2)-18" U-BOLTS & SHEAR PLATES 9-16 FOOT PLATFORMS WITH 5" OR 6" STRUCTURAL LONG SILLS ON 1988 THRU 2002 GM 3500HD; 7" LONG SILLS ON GM 3500, 4500, 5500 OR 1999 OR NEWER FORD F-350, 450, 550. KIT INCLUDES (2)-20" & (4)-22" U-BOLTS & SHEAR PLATES 8 FOOT PLATFORMS WITH 4" LONG SILLS ON 2000 AND NEWER FORD SUPER DUTY 56" CA CHASSIS. KIT INCLUDES (4)-16" U-BOLTS & SHEAR PLATES 8-12 FOOT PLATFORMS WITH 5" OR 6" STRUCTURAL LONG SILLS, 1.5" CUSHION STRIP ON GM 3500, 4500, 5500; 1999 OR NEWER FORD F-350, 450, 550. KIT INCLUDES (4)-18" U-BOLTS & SHEAR PLATES 9-16 FOOT PLATFORMS WITH 7" STRUCTURAL LONG SILLS, 1.5" CUSHION STRIP ON GM 3500, 4500, 5500; 1999 OR NEWER FORD F-350, 450, 550. KIT INCLUDES (6)-18" U-BOLTS & SHEAR PLATES 9-16 FOOT PLATFORMS WITH 1.5" CUSHION STRIP PLUS 5" OR 6" STRUCTURAL LONG SILLS ON MEDIUM DUTY CHASSIS, OR 6" LONG SILLS ON GM 3500, 4500, 5500; OR 5"-7" LONG SILLS ON 2002 AND LATER E-350/450; OR 7" LONG SILLS ON GM 3500, 4500, 5500; 1999 AND LATER FORD F-350, 450, 550. KIT INCLUDES (6)-20" U-BOLTS & SHEAR PLATES 11 FOOT PLATFORM, 80 SERIES, WITH 5.5" FORMED LONG SILLS FOR 2500 SERIES SPRINTER CHASSIS. INCLUDES WHIZ BOLTS AND NUTS FOR BOLTING TO CHASSIS BRACKETS. INCLUDES TAIL LIGHT MOUNTING BRACKETS. 80411978 80412927 8 FOOT PLATFORM ON 1988-2000 MODEL YEAR GM C/K 56" CA TAPERED FRAME 1999-2000 SILVERADO, & ALL 2001 AND NEWER GM C/K 56" CA; OR 56 "CA RAM BR SERIES (LONG SILLS ARE NOT INCLUDED, SEE OPTIONAL LONG SILL OPTIONS) 9 FOOT PLATFORMS WITH 3" FORMED LONG SILLS MOUNTED ON 1997-2002 RAM 60 CA CHASSIS. LONG SILLS ARE PRE-PUNCHED & BOLT TO CHASSIS 12 FOOT PLATFORM, 90 SERIES, WITH 3" FORMED LONG SILLS FOR 3500 SERIES SPRINTER CHASSIS. INCLUDES WHIZ BOLTS AND NUTS FOR BOLTING TO CHASSIS BRACKETS 13 THROUGH 18 FOOT PLATFORMS WITH 7" OR 8" STRUCTURAL LONG SILLS MOUNTED ON MOST MEDIUM DUTY. KIT INCLUDES (8)-22" U-BOLTS AND SHEAR PLATES 20 THROUGH 26 FOOT PLATFORMS WITH 7" OR 8" STRUCTURAL LONG SILLS MOUNTED ON MOST MEDIUM DUTY. KIT INCLUDES (14)-22" U-BOLTS AND SHEAR PLATES Option No. APPLICATION PRICE Option No. APPLICATION 80411960 80412281 80412117 PRICE Page 11
EFFECTIVE: JUNE 24, 2016 ACCESS DOOR THE ACCESS DOOR IS FOR GOOSENECK TRAILER APPLICATIONS. IT HAS 14" X 15" CLEAR DOOR OPENING FOR EASY ACCESS TO HITCH. CONSISTS OF 14 GUAGE GALVANNEAL FRAME, 1/8" TREADPLATE DOOR, AND RECESSED STEEL HINGE WITH 1/4" DIAMETER STAINLESS STEEL HINGE PINS. THE TRAP DOOR COMES ASSEMBLED WITH PRIME PAINT AND IS DESIGNED FOR QUICK INSTALLATION. AVAILABLE LOOSE ONLY FOR USE ON WESTERNER STORAGE BODIES AND PLATFORMS. NOT REQUIRED ON PGN SERIES. GOOSENECK HITCH SYSTEM GOOSENECK HITCH MOUNTING SYSTEM IS RATED FOR 16,000 LB MAXIMUM TRAILER WEIGHT AND 1600 LB MAXIMUM TONGUE WEIGHT. MOUNTING PLATE COMES WITH 1.28 INCH DIAMETER HOLE FOR HITCH BALL. BALL IS NOT INCLUDED. ALL MOUNTING BRACKETS AND FASTENERS ARE INCLUDED. MOUNTED DIRECTLY TO CHASSIS FRAME RAILS SO LOAD IS PULLED DIRECTLY BY TRUCK AND NOT TRUCK BODY. CAUTION: DO NOT EXCEED MAXIMUM TRAILER TOWING RATING OF YOUR CHASSIS. USE WITH "ACCESS DOOR". AVAILABLE LOOSE ONLY FOR USE WITH PLATFORMS (EXCEPT PG SERIES WESTERNER) AND WESTERNER STORAGE BODIES. (SOME PLATFORMS MAY REQUIRE CROSS SILL MODIFICATIONS) HITCH NOT COMPATIBLE WITH RAM FORMED BOLT ON LONG SILL OPTION. HITCH NOT COMPATIBLE WITH WESTERNER STORAGE BODIES ON FORD 56 CA PICKUP CHASSIS. NOTE: 15-1/4" X 16-3/8" OPENING REQUIRED IN FLOOR PLATE NOTE: NOT FOR USE ON CHASSIES WITH FRAME WIDER THAN LISTED BELOW OR WITH PGN SERIES PLATFORMS (HITCH INCLUDED STANDARD). 21183454 Option No. LOOSE, ACCESS DOOR ASSEMBLY 85410660 85410652 LOOSE, HITCH PLATE & KIT FOR 38" WIDE FRAME AND GM TAPERED FRAME (1988-2000) LOOSE, HITCH PLATE & KIT FOR 34" WIDE FRAME APPLICATION PRICE Option No. APPLICATION PRICE Page 12
TOOL BOX / MUD FLAP MOUNTING BRACKET KIT INCLUDES MOUNTING BRACKETS, BACK-UP PLATE, AND HARDWARE FOR MOUNTING EIGHT ONE SET OF MUD-FLAPS OR ONE UNDER BODY TOOL BOX ON PG MODEL PLATFORMS. BRACKET IS PUNCHED TO ALIGN WITH HOLES IN MOST COMMON WIDTH MUD FLAPS, SINGLE OR DUAL WHEEL. WELDS TO LONG SILL AND SIDE RAIL BOTTOM FLANGE. BOLTS TO EITHER THE ENDS OF TOOL BOX OR TO MUD FLAPS AND WEIGHS 9 LBS. FITS PG MODELS ONLY. SPARE TIRE RETAINER SPARE TIRE RETAINER KIT IS COMPLETE WITH MOUNTING HARDWARE FOR MOUNTING TO A RACK SECTION OR TO A BULKHEAD. RETAINER MAY BE BOLTED ON OR WELDED ON. RETAINS TIRE AND WHEEL IN A VERTICAL POSITION AGAINST THE RACK SECTION OR BULKHEAD. WEIGHT IS 2 LBS. MAY BE USED WITH ANY RACK SECTION OR BULKHEAD WHICH IS TALLER THAN HEIGHT TO TOP OF BOLT PATTERN ON WHEEL WHEN STANDING VERTICALLY. 82013905 LOOSE, MOUNTING KIT, TOOL BOX OR MUD FLAPS 20048955 Option No. APPLICATION PRICE Option No. LOOSE, SPARE TIRE RETAINER KIT APPLICATION PRICE Page 13
EFFECTIVE: MARCH 8, 2017 RECEIVER HITCH-CLASS V-ICC BUMPER RECEIVER HITCH DRAWBARS - 2.5" COMBINATION CLASS V RECEIVER HITCH AND ICC BUMPER INTENDED TO BE USED IN CONJUNCTION WITH A PLATFORM OR DUMP BODY ON CURRENT YEAR PRODUCTION 34" FRAME WIDTH CAB CHASSIS. HITCH IS RATED AT 12,000 LBS MAXIMUM TRAILER WEIGHT AND MAXIMUM TONGUE WEIGHT VARIES BY TYPE AS SHOWN BELOW. HITCH REQUIRES A DRAWBAR WITH 2.5" SQUARE SHANK (SEE ELSEWHERE THIS SECTION). INCLUDES A RECEIVER ASSEMBLY WITH INTEGRAL MOUNTING PLATES AND ICC BUMPER, MOUNTING HARDWARE, PIN, CLIP, AND INSTALLATION INSTRUCTIONS. ALL HITCHES ARE SHIPPED WITH A BLACK TOP COAT FINISH. ALL HITCHES WEIGH APPROXIMATELY 110 LBS. NOTE: DO NOT EXCEED THE TOWING CAPACITY SPECIFIED BY THE CHASSIS MANUFACTURER IF IT IS LESS THAN THE ABOVE STATED HITCH CAPACITY. RECEIVER HITCH DRAWBARS ARE FOR USE WITH CLASS V 2.5" RECEIVER HITCHES. DRAWBARS HAVE 2.5" SQUARE SHANKS AND ARE RATED AT 12,000 LBS MAX. TRAILER WEIGHT AND 1200 LBS. MAX. TONGUE WEIGHT. PINTLE HOOK WITH BALL COMBINATION IS RATED AT 16,000 LBS. MAX. TRAILER WEIGHT AND 3000 LBS TONGUE WEIGHT. SHIPPED WITH A BLACK TOP COAT FINISH. NOTE: DO NOT EXCEED THE TOWING CAPACITY SPECIFIED BY THE CHASSIS MANUFACTURER. DO NOT EXCEED THE RATED HITCH CAPACITY OR THE RATED DRAWBAR CAPACITY. IF ADAPTER (12305678) IS USED, DO NOT EXCEED THE RATED CAPACITY OF THE 2.0 INCH SQUARE SHANK DRAWBAR. NOTE: COMPATIBLE WITH 34" FRAME WIDTH 60" CA AND LONGER CAB CHASSIS. NOT COMPATIBLE WITH 38" OR WIDER 56" CA OR SHORTER FACTORY BOX DELETE OR PICKUP BOX REMOVAL PICKUP CHASSIS RAM RAM CHASSIS WITH FULL FACTORY AFTER FRAME: 85410124 85415941 85415958 85414878 85414852 85414860 TYPE "C" - NOT SHOWN, 2400 LBS. MAX. TONGUE WEIGHT UNDER FRAME WELD-ON FOR ALL APPLICATIONS 80009210 RECEIVER HITCH FOR SPRINTER 3500 A RECEIVER HITCH FOR FORD SUPER DUTY & GM 3500 C/K RECEIVER HITCH FOR 2007 & NEWER RAM CHASSIS CAB RECEIVER HITCH FOR 2007 & NEWER RAM OR GM C/K 84 CA CHASSIS CAB - 10' PLATFORM ON 60 CA, 12' PLATFORM ON 84 CA RECEIVER HITCH FOR 2003-2008 GM C4500/5500 CHASSIS WITH AFTER-FRAME SHORTENED TO 2.5" BEHIND SPRING HANGER: A RECEIVER HITCH FOR 2001 & NEWER GM 3500 C/K C 12306395 LOOSE, 2.5" RECEIVER DRAWBAR WITH PINTLE MOUNT PLATE RECEIVER HITCH FOR 2003-2008 GM C4500/5500 (N/A WITH EITHER 40 OR 60 GAL. REAR TANK) 12306361 12306379 12306387 12306403 Option No. APPLICATION TYPE PRICE Option No. A A B C 12305678 LOOSE, 2.5" RECEIVER DRAWBAR WITH 3" DROP LOOSE, 2.5" RECEIVER DRAWBAR WITH 5" DROP LOOSE, 2.5" RECEIVER DRAWBAR WITH 7.75" DROP LOOSE, PINTLE HOOK COMBINATION WITH 2" BALL LOOSE, ADAPTER FOR 2" DRAWBAR USE WITH 2.5" RECEIVER APPLICATION PRICE Page 14
EFFECTIVE: MAY 1, 2017 RECEIVER HITCH-CLASS IV-ICC BUMPER COMBINATION CLASS IV RECEIVER HITCH AND ICC BUMPER INTENDED TO BE USED IN CONJUNCTION WITH A DUMPING PLATFORM ON CURRENT YEAR PRODUCTION CAB CHASSIS. HITCH IS RATED AT 10,000 LBS MAX. TRAILER WEIGHT AND 1000 LBS MAX. TONGUE WEIGHT. HITCH REQUIRES A DRAWBAR WITH 2.0" SQUARE SHANK. INCLUDES A RECEIVER ASSEMBLY WITH INTEGRAL MOUNTING PLATES AND ICC BUMPER, MOUNTING HARDWARE, PIN, CLIP, AND INSTALLATION INSTRUCTIONS. THE HITCH WEIGHS 120 LBS AND IS SHIPPED WITH A BLACK TOP COAT FINISH. NOTE: USE OF STRAIGHT END RAIL OPTION (77500858) IS RECOMMENDED. DRAWBAR MAY NEED TO BE REMOVED TO AVOID CONTACT WHEN BED IS RAISED. NOTE: DO NOT EXCEED THE TOWING CAPACITY SPECIFIED BY THE CHASSIS MANUFACTURER IF IT IS LESS THAN THE ABOVE STATED HITCH CAPACITY. ICC BUMPER I.C.C. STYLE UNDER-RIDE PREVENTION BUMPER. CONSTRUCTED OF 4 INCH CHANNEL TO DIMENSIONS SHOWN. INTENDED TO BE WELDED TO TRUCK FRAME OR PLATFORM LONG SILLS. THE BUMPER WEIGHT IS 47 LBS. FINISH PAINTED BLACK. USE 38" SPACING FOR FORD 56" CA, GM TAPERED FRAME AND OPTIONAL RAM BOLT ON LONG SILLS ON 56", 60", AND 84" CA. USE 42" SPACING FOR 1999 GM SILVERADO 56" CA. - NOT COMPATIBLE WITH PGN SERIES PLATFORMS - NOT COMPATIBLE WITH GM TAPERED FRAME LONG SILL OPTION NOTE: NOT COMPATIBLE WITH PGN SERIES PLATFORMS 85415925 RECEIVER HITCH FOR FORD SUPER DUTY (WITHOUT FRAME SHORTENED) 84" CA WITH 12' BODY OR 108" CA WITH 14' BODY 80009220 LOOSE, I.C.C BUMPER FOR SPRINTER PLATFORM 85415933 RECEIVER HITCH FOR APPLICATIONS WHERE END OF FRAME HAS BEEN SHORTENED 80428428 LOOSE, I.C.C. BUMPER FORD TRANSIT PLATFORM INCLUDING: 80428493 LOOSE, I.C.C. BUMPER EXTENSION KIT FORD TRANSIT PLATFORM - 2001 & NEWER GM 3500 60" CA WITH 9' BODY OR 84" CA WITH 11' BODY - C4500/5500 WITH DUAL TANKS OR FRONT TANK ONLY (NOT 32 OR 40 GAL 85413128 LOOSE, I.C.C. BUMPER, 34 INCH FRAME WIDTH REAR TANK) 60" CA WITH 9' BODY, 84" CA WITH 11' BODY OR 108" CA WITH 85413136 LOOSE, I.C.C. BUMPER, 38 INCH FRAME WIDTH 13' BODY 85413169 LOOSE, I.C.C. BUMPER, 42 INCH FRAME WIDTH Option No. APPLICATION PRICE Option No. APPLICATION PRICE Page 15
DELETE TAPERED TAILSKIRT THE TAPERED TAILSKIRT ON THE REAR OF PVMX, PHHJ OR PCH PLATFORM IS DELETED AND REPLACED WITH A STRAIGHT REAR END RAIL AND END GUSSETS. AVAILABLE ON ALL PVMX AND PCH PLATFORMS WITH THE FOLLOWING EXCEPTIONS: - NOT COMPATIBLE WITH STANDARD LONG SILLS LOOSE - NOT COMPATIBLE WITH OPTIONAL LONG SILLS INSTALLED - NOT COMPATIBLE WITH OPTIONAL LONG SILLS LOOSE - NOT COMPATIBLE WITH OPTIONAL LONG GCDH TAILGATE OPTIONS MANUAL TAILGATE IS INSTALLED AND DOUBLE ACTING, WITH PULL PINS AT TOP FOR GATE TO DROP FROM TOP. LOWER RELEASE AND LATCHING ARE SAME AS LEVER OPERATED TAILGATE. TAILGATE WEIGHS 5 LBS LESS THAN LEVER OPERATED TAILGATE. COAL CHUTE TAILGATE IS INSTALLED AND DOUBLE ACTING, TOP OF TAILGATE HAS DUAL LEVER QUICK RELEASE. LOWER RELEASE LATCHING SAME AS LEVER OPERATED TAILGATE. COAL CHUTE OPENING IS 8.56" X 17.00" DOOR OPENS UPWARD WITH HANDLE ABOVE COAL CHUTE. TAILGATE WEIGHS 54 LBS MORE THAN LEVER OPERATED TAILGATE. 77500858 DELETE TAILSKIRT AND ADD STRAIGHT REAR END RAIL 77501443 MANUAL TAILGATE ILO LEVER OPERATED TAILGATE DEDUCT 77501468 COAL CHUTE / LEVER OPERATED TAILGATE ILO STANDARD LEVER OPERATED TAILGATE Option No. APPLICATION PRICE Option No. APPLICATION PRICE Page 16
PLATFORM LED LIGHT KITS PLATFORM LED LIGHT KITS DUPLICATE THE STANDARD INCANDESCENT LIGHT KITS FOR ALL STANDARD PLATFORMS EXCEPT THAT RECTANGULAR LED MARKER, RID AND CLEARANCE LIGHTS ARE INCLUDED. SEE NOTE BELOW FOR 8' PG PLATFORMS. PGH PLATFORMS WITH FACTORY INSTALLED LIGHTS REQUIRE A SPECIAL ORDER (SMO) TO INSTALL LED LIGHTS. LOOSE KITS AVAILABLE TO RETROFIT OLDER PLATFORMS. AVAILABLE FOR ALL STANDARD PLATFORMS. BULK U-BOLT ASSEMBLIES BULK U-BOLT ASSEMBLIES FOR STOCKING. ALL U-BOLTS ARE 5/8-11UNC ROLLED THREAD U-BOLTS MEETING S.A.E. GRADE 5 MATERIAL SPECIFICATIONS. U-BOLT TIES ARE 1/2" THICK HOT ROLLED STEEL. EACH PART NUMBER INCLUDES (1) U-BOLT, (1) U-BOLT TIE, (2) NYLOK LOCKING NUTS. ITEMS WILL BE SHIPPED BULK PACKED, UNASSEMBLED. MOUNTING INSTRUCTIONS, SHEAR PLATES, ETC. ARE NOT INCLUDED, KITS INCLUDING THESE ITEM ARE AVAILABLE, SEE "PLATFORM MOUNTING KITS" IN THE OPTIONS SECTION. MINIMUM ORDER QUANTITIY IS 24. 85412607LED 94, 96, 102 SERIES; PVMX, PCH, PHHJ-16 THRU 26, PHH, PVMXW 85412615LED 80 SERIES PVMX 85412664LED PG-83 (STOP / TURN / TAIL & BACKUP NOT LED) 85412656LED PG-838 (STOP / TURN / TAIL & BACKUP NOT LED) 85412740LED PG-938 (STOP / TURN / TAIL & BACKUP NOT LED) 85412672LED PG-113, PG-123, PG-143, PG-93, PHHJS-143, PHHJT-143 85412754LED PHHJ-9 THRU 12; PHHJ-143 (WOOD ONLY); 51.00 51.00 51.00 51.00 51.00 51.00 53.00 PLB-9 & 11 UBOLT14 UBOLT16 UBOLT18 UBOLT20 UBOLT22 U-BOLT ASSEMBLY, LENGTH = 14" U-BOLT ASSEMBLY, LENGTH = 16" U-BOLT ASSEMBLY, LENGTH = 18" U-BOLT ASSEMBLY, LENGTH = 20" U-BOLT ASSEMBLY, LENGTH = 22" 85412599LED GCDH "B" MODELS 50.00 UBOLT24 U-BOLT ASSEMBLY, LENGTH = 24" Option No. APPLICATION LIEU OF PRICE NET PRICE Option No. APPLICATION PRICE Page 17
EFFECTIVE: AUGUST 24, 2016 ROPE HOOKS ROPE HOOKS ARE INSTALLED IN THE FRONT SIDE OF CROSS SILLS, 3.25" FROM EACH END (EXCEPT PHH AND PHHJ MODELS ARE 5.75"). ROPE HOOKS ARE CONSTRUCTED OF.50" DIAMETER STEEL ROD, ARE FORMED WITH A.75" INSIDE RADIUS AND WEIGH.25 LBS EACH. PLATFORMS WITH CROSS OF 12 OR 16 INCHES WILL HAVE A ROPE HOOK ON EVERY OTHER CROSS SILL. PLATFORMS WITH CROSS OF 18 OR 24 INCHES AND STANDARD WESTERNER PLATFORMS WILL HAVE A ROPE HOOK ON EVERY CROSS SILL. ROPE HOOKS ARE AVAILABLE INSTALLED ON ALL PLATFORM MODELS WITH THE FOLLOWING EXCEPTIONS: - NOT AVAILABLE ON GCDH OR PGN MODELS ROPE HOOKS - CONTINUED 77501807 77501815 77501823 77501831 77501849 77501856 77501864 77501872 INSTALLED, 6 ROPE HOOKS, ALL 7 FT. LONG 80 SERIES PLATFORMS WITH STANDARD CROSS INSTALLED, 8 ROPE HOOKS, PHHJ 9 FT., ALL 8 & 9 FT. 80 SERIES WITH STANDARD SPACING. ALL 8 & 9 FT. PGH. ALL 7 & 8 FT. 80 SERIES AND 8 FT. 94 & 96 SERIES PLATFORMS WITH OPTIONAL 12" CROSS INSTALLED, 10 ROPE HOOKS, PHHJ 11, 12, 14 FT. ALL 10 FT. 80 SERIES, PGH 11 FT. 8 FT. 94 & 96 SERIES WITH STANDARD SPACING. ALL 9 & 10 FT. 80 SERIES AND ALL 9, 10 & 11 FT. 94 & 96 SERIES PLATFORMS WITH OPTIONAL 12" CROSS INSTALLED, 12 ROPE HOOKS, PHHJ-163, PG-123, 9 & 10 FT. 94 & 96 SERIES PLATFORMS WITH STANDARD CROSS, AND 12 FT. PLATFORMS WITH OPTIONAL 12" CROSS INSTALLED, 14 ROPE HOOKS, PHHJ-183 & 203 AND ALL OTHER 11, 13, & 14 FT. PLATFORMS WITH STANDARD CROSS. INSTALLED, 16 ROPE HOOKS, PHHJ 22 FT. AND ALL OTHER 15 & 16 FT. PLATFORMS WITH STANDARD CROSS. ALL 12 FT. PLATFORMS WITH STANDARD 18" CROSS INSTALLED, 18 ROPE HOOKS, PHHJ 24 FT. AND ALL OTHER 18 FT. PLATFORMS WITH STANDARD CROSS. INSTALLED, 20 ROPE HOOKS, PHHJ 26 FT. AND ALL OTHER 20 FT PLATFORMS WITH STANDARD CROSS. 77501880 77501898 77501906 INSTALLED, 22 ROPE HOOKS, ALL 22 FT. PLATFORMS WITH STANDARD CROSS. INSTALLED, 24 ROPE HOOKS, ALL 24 FT. PLATFORMS WITH STANDARD CROSS. INSTALLED, 26 ROPE HOOKS, ALL 26 FT. PLATFORMS WITH STANDARD CROSS. Option No. APPLICATION PRICE Page 18
EFFECTIVE: MARCH 8, 2017 RUB RAIL AND POCKETS - PHH PLATFORMS RUB RAIL AND STAKE POCKETS (.38" X 2.50") FOR THE REAR END RAIL OF HEAVY-HAULER PLATFORMS. POCKET SPACING ON INSTALLED OPTION WILL BE FOR STANDARD STAKE PACKS. WEIGHT IS 42 LBS. AVAILABLE FOR ALL HEAVY-HAULER PLATFORMS. OPTION NO. 77501237 85410009 * USE RESPECTIVE LOOSE WEIGHTS WEIGHT 43 LB. 43 LB. THIS PANEL INTENTIONALLY LEFT BLANK 77501237 INSTALLED, FOUR POCKETS AND RUB RAIL, PHH MODELS 85410009 LOOSE, FOUR POCKETS AND RUB RAIL, PHH MODELS Option No. APPLICATION PRICE Page 19
PB FLOOR BLACK P.B. (POLYETHYLENE BOARD) FLOOR INSTALLED IN LIEU OF THE STANDARD NO. 1 DENSE YELLOW PINE WOOD FLOOR. BOARDS ARE 1.38" X 5.50" FACE (ACTUAL FNISHED DIMENSIONS) CENTER MATCHED TONGUE AND GROOVE. AVAILABLE ON WOOD FLOOR PLATFORM MODELS PVMX 8'-14' 96" WIDE AND 102" PVMXW-143. AVAILABLE ON 80" PLATFORMS 8-10' AND INCLUDES OPTIONAL 12" CROSS. FLOOR IS NATURAL BLACK COLOR AND LEFT UNPAINTED. P.B. FLOOR ON PLATFORM LENGTHS OTHER THAN LISTED ABOVE AVAILABLE ON SPECIAL ORDER BASIS ONLY BACK PANEL ENCLOSURES (FOR CUTAWAY APPLICATIONS) CUTAWAY BACK PANEL ENCLOSURES ARE USED TO SEAL OFF THE BACK OPENING IN THE CAB OF A CUTAWAY, THUS TURNING IT INTO A CAB-CHASSIS. THIS ALLOWS THE CONVERSION FOR UP TO A 14,200 GVWR GM CAB-CHASSIS WHICH IS NOT IN THEIR LINE UP TODAY. THE BACK PANEL CAN COME WITH OR WITHOUT A GLASS WINDOW. THE PANEL ALSO COMES WITH A VENT FOR PRESSURE EQUALIZATION WHEN THE DOORS ARE OPENED AND CLOSED PREVENTING DEFLECTION OF THE PANEL. THE REAR VENT ALSO ALLOWS FOR PROPER OPERATION OF THE HEATING/COOLING SYSTEM. 77502110 77502102 INSTALLED, 80 SERIES PLATFORMS - INCLUDES (12") CROSS OPTION INSTALLED, 96 SERIES PLATFORMS, 8 TO 14 FEET LONG WITH STANDARD CROSS PRICE PER FOOT LENGTH 77502128 INSTALLED, 96 SERIES PLATFORMS, 8 TO 14 FEET LONG, WITH OPTIONAL (12") CROSS 77502136 INSTALLED, 102 SERIES PLATFORM, 14 FEET LONG, WITH STANDARD, (12") CROSS Option No. APPLICATION PRICE BACKCUT-GM BACKCUT-GM-NG Option No. PLATFORMS UP TO AND INCLUDING 12 FEET PLATFORMS 13 FEET AND LONGER APPLICATION PRICE Page 20
PVMX OVERCAB MATERIAL RACK MATERIAL RACK AND ALL MOUNTING BRACKETS ARE SUPPLIED E-COATED AND POWDER PAINTED BLACK, AND THE MOUNTING HARDWARE IS ZINC PLATED. INCLUDES BULKHEAD, SIDE RAILS WITH TIE DOWN HOOKS (4 PER SIDE), VERTICAL REAR POSTS (2 PER 9' & 12', 4 PER 14'), CENTER CROSS SECTIONS AND REAR CENTER SECTION. THE REAR CENTER SECTION CAN BE ROTATED AND THE CENTER CROSS SUPPORT(S) ARE REMOVABLE. LOAD CARRYING CAPACITY IS 1500 LBS WITH ALL SUPPORTS USED AND IS FORK LIFT LOADABLE. THE WEIGHT OF THE MATERIAL RACK IS SHOWN IN THE TABLE. AVAILABLE IN ONE WIDTH FOR PVMX (OR PCH) PLATFORMS (NOT INCLUDED). THE MATERIAL RACK CAN BE USED ON PVMX (OR PCH)- 93C, 123C AND 143C PLATFORMS WITH THE FOLLOWING EXCEPTIONS: - NOT COMPATIBLE WITH SPRINTER PLATFORMS - NOT COMPATIBLE WITH WELD ON BULKHEADS - NOT COMPATIBLE WITH C4500/5500 OR OTHER MEDIUM DUTY TRUCKS OVERCAB MATERIAL RACK - CONTINUED DIMENSIONS OPTION NO. A B C D E F WEIGHT 26252551 164.5 78.7 40.6 26252544 164.5 78.7 37.6 43.4 106.1 26252536 200.5 78.7 40.6 49.4 26252528 200.5 78.7 37.6 43.4 142.1 49.4 106.1 34.7 530 31.7 530 142.1 34.7 540 31.7 540 26252569 224.5 78.7 40.6 49.4 166.1 31.7 550 26252551 26252544 26252536 26252528 26252569 LOOSE, PVMX-93C MATERIAL RACK, FORD / DODGE CHASSIS LOOSE, PVMX-93C MATERIAL RACK, GM C / K CHASSIS LOOSE, PVMX-123C MATERIAL RACK, FORD / DODGE CHASSIS LOOSE, PVMX-123C MATERIAL RACK, GM C / K CHASSIS LOOSE, PVMX-143C MATERIAL RACK, FORD / DODGE CHASSIS Option No. APPLICATION PRICE Page 21