PERUBAHAN SPESIFIKASI TEKNIS PENGADAAN ALAT LABORATORIUM BALAI BESAR POM DI PALEMBANG TAHUN 2012 No Nama Barang dan Spesifikasi Teknis 1 AUTOCLAVE UNIT 2 Dimensions : (W x H x L) : approximately 65 x 120 x 65 cm Chamber size : ( ɸ x H ): approximately 40 x 80 cm Capacity : minimal 100 Liter Power source : 220-240 Volt, 50-60 Hz Power consumption : 4 KW or lower Sterilization temperature range : 105 C to 135 C, or wider Chamber material : Stainless steel SUS 304 Max allowable pressure : 0.26 Mpa Temperature display range : 5 C to 135 C, or wider Sterilisation Time Range : 1 to 250 minutes, or better Pressure gauge : 0 to 0.4Mpa, or better Accecories : Stailess steel wire basket 3 pcs in different types, heater cover, drain hose, exhaust hose, drain bottle, caster stoppers 2 AUTOINJECTOR AND AUTOSAMPLER for Agilent Technologies 7890 A Gas Chromathography 7693a Autoinjector, include : Transfer Turret : 16-Sample Turret : Mounting post : Parking post for GC : Syringe 10 µl : Solvent Bottles 3 CENTRIFUGE Speed control : up to 8500 rpm, or higher (by fixed angle rotor) Max Capacity : 300 ml (6x50) or better Force range/rcf : Up to 4600 xg, or better (by fixed angle rotor) Running time : 1-99 min or better Display : LCD digital Power consumption : 220-240V / 50-60 Hz Timer feature : : hold, at-speed, regular timed mode Noise : < 65dBA Control : microprocessor Accessories : Polypropilen conical bottom centrifuge tube with cap 50 ml : 10 pcs : Wood Test tube rack hole ɸ 18 mm @ 3 pcs : Fixed Angle Rotor capacity 12x15 ml : Fixed Angle Rotor capacity 6x50 ml Included of : Instalation 4 CONDUCTIVITY METER Temperature range : -5 to 100 o C or wider Conductivity range : 0 to 3000 ms/cm, or wider Conductivity accuracy : ± 0.5 % or less Conductivity Resolution : adjustable Sensor (s) : Conductivity cell, includes flow cell 0.01 to 300 µs/cm or Power Supply : wider 220-240 V, or Universal AC power adapter, or 4 x 1.5V AA Asesories : 100 µs/cm conductivity standard (5 x 60 ml bottles) : Swing arm electrode stand 5 DENSITOMETER/ TLC SCANNER Object formats : up to 200 200 mm Light sources : deuterium, halogen-tungsten
: Deuterium lamp : 190-400 nm or better : Halogen tungsten lamp: 390-900 nm or better Data step resolution : 25 200 µm or better Monochromator : 1200 lines/mm or better bandwith selectable : 5/20 nm or better reproducibility of wavelength : 0.2 nm or better setting accuracy : 1 nm or better Maximum speed of spectra : 100 nm/s at oversampling rate 40/nm or greater recording Scanning speed : 1 100 mm/s, Fully automatic scanning Detector : Reflectance mode : Two matched broadband photomultiplier, multialkali type : Spectral sensitivity : 185-850 nm or better Voltage : 220/240 V, 50/60 Hz Workstation (hardware) : computer, processor intel pentium IV 2.8 GHz, DDR 2 G : Pentium IV core 2 duo, Windows XP, DDR 2 GB, Hard Disk 160 GB, RAM min 2 GB, : CDROM Drive, DVD/CD Writer, LCD Monitor17", VGA card min 128 MB, Laser-jet printer. Workstation (soft ware) : Compatible with Windows XP 2000/ Windows 7 : TLC Scanner Including 027.6312 equilink : Planar Chromatography Manager : Qualification & Self Test : Quantitative Chromatogram Evaluation : Spectrum Library 6 DISTILLATION SYSTEM Standard configuration : Automatic addition NaOH, programmable reaction and distillation time, Protection door with safety switch Distillation time : 2-4 minutes or better Recovery rate : up to 99.5 % or better Reproducibility : ± 1% or less Detection limit (N) : 0.1 mg or lower Steam regulation : 30-100 % or better Power Supply : 220-240 V, 50-60 Hz, 1600 watts or lower Accessories : Tubing Set Complete Set of storage tanks : 1 set Kjedalterm digestion tube 250 ml : 6 pcs UPS 5 KVA 1 Phase 1 unit Tool Kit Include : Instalation (IQ, OQ, PQ) Training Uji Fungsi Guarantee min. a year Original Manual operation (English/Indonesian) 7 DISINTEGRATION TESTER WITH TWO STATION Display : LCD Reciprocating mechanism - Speed : 30 ± 1 strokes/ min - Stroke : 55 mm Volume of waterbath : 9 Liters Volume of beaker : 1 Liters Power supply : 100-240V/ 45-65Hz, 75 watts or lower Complete : Tester unit : Plexyglass water bath : Thermostat 25-40oC : Test vessel : Basket with disk : Power cable : Printer, connection cable and printer paper 8 FURNACE Chamber capacity : 14 liters Temperature max : 1200 o C or better Power: : 220-240 V/50-60 Hz. - 3100 Watts or lower Accessory : Stainless Stell Shelf, 2 buah Include : : Instalation
9 HEATING MANTLE Capacity : 1000 ml Temperature range : up to 450 o C Power Supply : 220-240V, 50-60 Hz, 300 Watts or lower 10 HOT PLATE Plate dimension : : 30 x 60 cm or greater Heating material : Aluminium Temperature range : : up to 370 oc or better Power : 220-240 V/50 Hz., 3200 Watts or lower include : Instalation 11 HOT PLATE + STIRER Plate dimension : : 18 x 18 cm or greater Heating material : Ceramic Temperature range : : up to 540 o C or better Display : : digital Speed range : 60-1200 rpm or wider Stirring Volume : up to 10 L or greater Power supply : 220 V / 50Hz. 1200 Watts or lower Assesories : Magnetic stirrer bar 5 x 30 mm : 1 pcs : Magnetic stirrer bar 5 x 40 mm : 1 pcs : Magnetic stirrer bar 5 x 50 mm : 1 pcs include : 12 HOT PLATE + STIRER Plate dimension : : 26 x 26 cm or greater Heating material : Ceramic Temperature range : : up to 400 o C or better Temperature display : : digital Strirring speed :. : 60-1200 rpm or wider Power : 220 V / 50Hz. 1600 Watts or lower Assesories : Magnetic stirrer bar 5 x 30 mm : 1 pcs : Magnetic stirrer bar 5 x 40 mm : 1 pcs : Magnetic stirrer bar 5 x 50 mm : 1 pcs include : 13 HOMOGENIZER Speed : up to 26,000 rpm or better Power supply : 100-240 Volt, 40-70 Hz, 130 watts or lower Viskositas : Allows for any viscosity up to 5,000 mpa s Max Quantities : up to 2,0 L Accessories : Plate stand : 2 cross sleves : vessel holding bracket Include : : Instalation 14 HPLC UV-Vis DETECTOR Pompa : Binary and Quartenary Pump, Dual-plunger reciprocating Tipe pump Flow rate range : 0,1-5 ml/min or wider Flow rate accuracy : ± 2% or less Pressure operating Range : up to 375 bar or better Vesel : minimal 4 Detector Detector UV Vis : Lamp : D2 lamp, W lamp, Hg lamp (for wavelength check) wavelength range : 200-600 nm or wider wavelength Accuracy : 1 nm or less Degasser : 1 unit Column Oven
temperature Range : 20-65 o C or wider Manual Injector 1 unit Data Prosessor : Min Pentium IV core 2 duo, Windows XP, Hard disk min 120 G, RAM min 1 G, DVD/VCd Writer, LCD monitor 18", laser jet printer : Software compatible for data acquisition, analysis, storage Accecories Dust cover : 1 set Tools kit : 1 set Column C 18, 5 µm x 25 cm : 2 pcs MICRO SYRINGE 100 ul : 1 pcs Sample filter : 1 set UPS 10KVa, 1 phase : 1 pcs Include: : Instalation (IQ, OQ, PQ) 15 HPLC UV-Vis Detector with Autosampler Pompa : Binary and Quartenary Pump, Parallel-type double plunger or Tipe equivalent Flow rate range : 0,1-5 ml/min or wider Flow rate accuracy : ± 1% or less Flow rate Presisi : 0.1% RSD or better Pressure operating Range : up to 400 bar or better Vesel : minimal 4 Detector : Detector UV Vis Lamp : Deuterium (D2) lamp wavelength range : 200-600 nm or wider wavelength Accuracy : 1 nm or less bandwith : 8 nm Degasser : 1 Unit Column Oven temperature Range : 20-65 o C or wider temperature Precision : ± 1% or less Auto sampler : Injection Vol range : up to 100 ul or better Injection Volume accuracy : ± 1% or less Number of sampel : min 100 sampel @ 1,5 ml : the manual injector also can use if we release the automatic injector (not use autosampler) Data Prosessor : Min Pentium IV core 2 duo, Windows XP, Hard disk min 120 G, RAM min 1 G, DVD/VCd Writer, LCD monitor 18", laser jet printer : Software compatible for data acquisition, analysis, storage Accecories : Dust cover : 1 set Tools kit : 1 set Column C 18, 4,6 µm x 25 cm (tahan terhadap tekanan sampai dengan 300 bar atau lebih) : 2 pcs MICRO SYRINGE 100 ul : 2 psc Maintanace Kit : 1 set Reservoir tray : 1 set Auto rinsing Kit : 1 set Sample filter : 1 set sample vial 1,5 ml : 2 Pck (100pcs/pck) UPS 10KVa 1 phase : 1 pcs Include : Instalation (IQ, OQ, PQ) 16 HPLC UV-Vis and Flourosence Detector with Autosampler Pompa : Binary and Quartenary Pump, Dual-plunger reciprocating Tipe pump Flow rate range : 0,1-5 ml/min or wider Flow rate accuracy : ± 2% or less Pressure operating Range : up to 375 bar or better Vessel : minimal 4 solvent Detector : Fluorescence Detector light Source : Xe lamp, Hg lamp
Wavelength Range : 200-650 nm or wider Wavelength Accuracy : ± 3 nm or less Detector UV Vis : wavelength range : 200-600 nm or wider light Source : D2 lamp, W lamp, Hg lamp Wavelength Accuracy : ± 1 nm or less Degasser : Column Oven temperature Setting Range : 20-65 o C or better Temperature accuracy: : ± 0.1 C or less Auto sampler Injection Vol range : 1-50µl or wider Number of Sample : up to 200 vials (@ 1,5 ml) Manual Injector : Rheodyn Injector Data Prosessor : Min Pentium IV core 2 duo, Windows XP, Hard disk min 120 G, RAM min 1 G, DVD/VCd Writer, LCD monitor 18", laser jet printer : Software compatible for data acquisition, analysis, storage Accecories Dust cover : 1 set Tools kit : 1 set Column C 18, 5 µm, 25 cm : 2 pcs MICRO SYRINGE 50 ul : 1 pcs Sample filter : 1 set UPS 10KVa, 1 phase : 1 pcs sample vial 1,5 ml : 1 set Cap with hole : 1 set Septum : 1 set Include : Instalation (IQ, OQ, PQ) 17 HPLC Photo Diode Array Detector with Autosampler Pompa : Binary and Quartenary Pump, Parallel-type double plunger or Tipe equivalent Flow rate range : 0,1-5 ml/min or wider Flow rate accuracy : ± 1% or less Flow rate Presisi : 0.1% RSD or better Pressure operating Range : up to 400 bar or better Vesel : minimal 4 Detector Photodiode Array Detector Light source : Deuterium (D2) lamp, Tungsten (W) lamp Wavelength range : 200-800 nm or wider Wavelength accuracy : ± 1nm or less Wavelength precision : ± 0.1nm or less Degasser Column Oven temperature Range : up to 85 C or better temperature Precision : ± 1% or less Auto sampler Injection Vol range : up to 100µL Injection Volume accuracy : ± 1% or less Number of sampel : minimal 100 vial @ 1,5 ml : Note : the manual injector also can use if we release the automatic injector (not use autosampler) Data Prosessor : Min Pentium IV core 2 duo, Windows XP, Hard disk min 120 G, RAM min 1 G, DVD/VCd Writer, LCD monitor 18", laser jet printer : Software compatible for data acquisition, analysis, storage Accecories Dust cover : 1 set Tools kit : 1 set Column C 18, 4,6 µm x 25 cm : 2 pcs (tahan terhadap tekanan sampai dengan 300 bar atau lebih) MICRO SYRINGE 100 ul : 2 pcs Maintanace Kit : 1 set Reservoir tray : 1 set Auto rinsing Kit : 1 set Sample filter : 1 set sample vial : 2 Pck (100pcs/pck) UPS 10KVa, 1 ph : 1 Pcs Include : Instalation (IQ, OQ, PQ)
18 INKUBATOR Temperatur range : from -12 C up to 60 C or wider Volume : minimal 400 Liters Control LED with microprocessor, show the actual temp, adjustment temp, and timer, etc Material : Main body stainless Stell with double locking, inner door: glass Ventilation : adjustable Power Supply : 220-240 V/50-60 Hz, 750 watts or lower Dimension (W x H x L) : Approximately (120x150x65) cm Accessories : Shelves stainless steel 3 pcs : Stabilizer compatible Include 19 LABORATORY BLENDER Speed : up to 22.000 rpm or better Capacity : ± 1 Liter Container : : Stainless steel with handle and two piece vinyland styrene lid Power : 220-240 Volt, 50/60 Hz 20 LABORATORY REFRIGERATOR External Dims. (WxDxH) : (50-80)x(75-100)x(180-200) cm Volume : 600 L Drawers : Minimal 5 (solid roll-out) Doors : 1x double pane glass doors, Self closing Insulation : CFC-free, rigid polyurethane foamed-in-place or better Cooling Method : Forced air circulation with single fan Defrost Method : Forced type (cycle defrost system) : Full automatic Temperature Control : Microprocessor controlled on/off type : 1 o C step setting Temperature type (1 o C step resolution) Safety : High and low temperature protection circuit, Temperature lock, High and low temperature alarm Power Supply : 1 phase, 220 V/50-60 Hz, 200 W Accessories : Stabilizer 500 VA Include 21 MVU dan HVG for Shimadzu AA-6300 Mercury Vapour Unit for Shimadzu AA-6300 complete with accessories Type : MVU-1A Brand : SHIMADZU Vaporization method : Reduction and vaporization using reducing agent Measurement method : recirculation Air flow rate : 6 L/min Flow cell : Optical path length up to 100 mm Sample volume : 250 ml max Exhaust contamination prevention : Adsorption trapping in mercury trap bottle Complete with : Holder for gas flow cell : Gas Flow cell/long Abs. Cell for MVU-1A : Mounting Adaptor for AA-6300 : Step down Transformer 2 A ( from 220 V to 100 V) Hydride Vapour Generator for Shimadzu AA-6300 complete with accessories Type : HVG-1 Brand : SHIMADZU Method of Hydride Derization : Continuous Flow Method Sample Consumption : 0 to 7 ml/min, variable Reagent consumption : 0 to 2.5 ml/min, variable Atomizer : Heated absorbtion cell (Heated by Air-C2H2 flame in standard system) Carrier gas : Ar pressure: 3,2 kg/cm 2, consumption:70ml/min Complete with : Nozzle Assy for connected with Auto Sampler : Gas Argon UHP with cylinder : Pressure Regulator Ar Accessories : Hollow catode lamp for Mercury (Hg) 2 set : Hollow catode lamp for Arsenic (As) 2 set
: Standard solution Arsenic (As) 1 set : Standard Solution Mercury (Hg) 1 set Include: : Instalation (IQ, OQ, PQ) 22 ORBITAL SHAKER Motion : orbital Rotation speed (rpm) : 30-300 rpm or wider Timer : minimal 60 min or greater Power : 110/220V, 50/60Hz, 30W or lower Speed control : Digital Automatic Feedback Controller Accessories : Platform with Universal sping rack : Platform with 9x250 ml flask clamps : 1 unit 23 ph METER ph Range : 0,00-14,00 or wider Power Supply : 100-240 V/ 40-70 Hz, with plug adaptor Display : LCD ph Relative accuracy : ± 0.005 or less ph Resolution : variable 0.001 / 0.01/0.1 mv Range : -1800 to 1800 or wider mv Relative Accuracy : ± 0.2 or less mv Resolution : 0.1 or better Temperature range : 0 to 100 0C or wider Complete : workstation with integrated stirrer, : Technical buffer ph = 4,00 at 25 o C (ED min. a year) : Technical buffer ph = 7,00 at 25 o C (ED min. a year) : Technical buffer ph = 10,00 at 25 o C (ED min. a year) Include & Training 24 TIMBANGAN SEMI MIKRO UNIT 2 Maximum Capacity : 100g Readability : 0.01 mg Repeatability : 0.05 mg Linearity : 0.1 mg Power supply : 220-240 Volt, 45-60 Hz or AC Adapter 120 V Display : LCD Acessories : Stabilizer 500 ma 25 MEJA TIMBANGAN Size : 90 x 60 x 12 cm, tinggi meja 80cm Material : non magnetic material as fiber glass, : carbon tube use material diameter of approximate 10-15mm maximum distance : 30cm between bars. Complete with : dumping pad, vibration lower then 15 Hz Include : : Instalation 26 ULTRA LOW TEMPERATURE FREEZER Temperature range : up to -80 C or better Capacity : Approx. 80 L Storage capacity : Approx 2 box: min 40 pcs. Power supply : 220-240 V/ 50-60 Hz, 340 W or lower Display : digital display Refrigerant : HFC Mixed Refrigerant Accessories : Inventory Rack 6 Pcs 27 ULTRASONIC CLEANER Capacity : min 20 L Display : LCD Timer : 1-99 minutes or better Tank Temperature : Ambient - 50 o C or wider Power Supply : 100-240 V/40-50 KHz
28 VORTEX MIXER UNIT 3 Stirring speed: : up to 3000 rpm or better Operational mode: : Continuous or automatic Power supply: : 100 240 V / 50 60 Hz, 15 watts or lower Complete with : a standard cup for single test tube. Speed Control : Electronic Accessories : Costumizable soft foam top (1 set), Foam stand for microtiter (1 set) 29 WATERBATH Capacity : 14 Liter Temperature range : (5 C ambient) up to +95 C or wider Controller : microprocessor PID Timer : 1 to 99 min or better Power Supply : 220-240 V, 50-60 Hz, 1.800 W or lower Material : Stainless steel Dimention casing : l x w : approximately 60 x 45 cm Accessories : : Flat stainless steel cover with openings and concentric ring sets (6 openings / 87 mm diameter) : Gable stainless steel cover mounted for condensate drainage : Water level control 30 WATERBATH Capacity : 29 Liter Temperature range : (5 C ambient) up to +95 C or wider Controller : microprocessor PID Timer : 1min to 99 hours or better Material : Stainless steel Power Supply : 220-240 V, 50/60 Hz, 2400 W or lower Dimention casing : l x w : approximately 80 x 50 cm Accessories : : Flat stainless steel cover with openings and concentric ring sets (8 openings / 107 mm diameter) : Gable stainless steel cover mounted for condensate drainage : Water level control Catt: Perubahan terdapat pada Spesifikasi dengan tulisan berwarna merah