ORDER GUIDE Shown with HLO optics DESCRIPTION PROJECT: Via 4 is the flexible linear LED luminaire system for pendant, surface and recessed or in-wall installation, TYPE: whether as discrete luminaires, NOTES: continuous runs or patterns. Via 4 features numerous high-efficiency optical configurations, including separately controlled indirect/direct, wall wash and asymmetric distributions, as well as a wide range of electrical, control and trim options. Via 4 is an ideal vehicle for ChromaWerx color tuning in education, office, and healthcare applications where modular luminaires are used. up to 132 lm/w performance VIA4PDI HLO LED LUMINAIRE ID OPTICS LIGHT SOURCE CRI DIRECT LUMEN PACKAGES INDIRECT LUMEN PACKAGES VIA4PDI - via 4" pendant HLO - High-Efficiency LED - high performance LED 80-80CRI 500 - low output 500lm/ft 500 - low output 500lm/ft direct/indirect Lambertian Optic 90-90CRI 750 - med. output 750lm/ft 750 - medium output 750lm/ft 1000 - high output 1000lm/ft Lower lumen packages are 1200 - ultra high output 1200lm/ft available, consult factory CHROMAWERX LUMINAIRE LENGTH VOLTAGE DRIVER ELECTRICAL MOUNTING DUO - tunable white 2 channel control 27k to 65k SOLA - dim to warm single channel control 27k to 35k Available sections - 4', 6', 8', 10' & 12' #FT - nominal length in feet (2' increments only) Continuous Run - for luminaires over 12' Minimum Individual section 4' 120-120V 277-277V UNV - 120V-277V - with RDM (duo only) DA - Dali (duo only) 0-10 - 0-10V (sola only) 1-1 circuit 2-2 circuits 53WAC36 - power 5" + non power 3" white canopy (36" air craft cable) 55WSW18 - power 5" + non power 5" white canopy & stem (18" stem) See page 2 for all other mounting options. See page 3 for ordering code detailed information FINISH W - matte white AL - aluminum B - matte black CF# - custom finish specify RAL# OPTIONS FU - fuse DC - dust cover TB# - T-bar caddy clip specify grid size TG# - Tegular caddy clip specify grid size ST - Screw Slots caddy clip CU - custom WALL CONTROLS NCW - Nicolaudie white (for only) NCB - Nicolaudie black (for only) See page 5 for details CROSS SECTION OPTICS 0.46 ANSI C78.377-2015 0.44 0.42 3500 K 2700 K 3000 K 0.40 0.38 4000 K 4500 K 5000 K 5 3/8" 5 3/8" 0.36 0.34 5700 K 6500 K 0.32 4 1/32" VIA4PDI - air craft cable 4 1/32" VIA4PDI - stem HLO - High-efficiency Lambertian Optic 0.30 Black body curve 0..32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 File Name: VIA4-TW-PENDANT-DIRECT-INDIRECT-SPEC Page: 1 / 7
MOUNTING CODE GUIDE How to specify the required mounting? Our standard mounting kits for a cable mount is 53-W-AC-36 and for stem mount 55-W-SW-18. See table bellow for other configuration. 1. Canopy size - Our standard canopy size is 5" for the power and 3" for the non power side. For stem mount both canopies are 5" 2. Canopy color - White is the standard, custom color can be specified. 3. Hardware - In addition to the standard white we offer the stem in aluminum, black or custom color 4. Cable or stem length - Standard length, cable - 36", Stem 18", custom length can be specified for both. AIR CRAFT AND STEM MOUNTING CANOPY SIZE CANOPY COLOR HARDWARE CABLE OR STEM LENGTH 53 W AC 18 Power side 5" canopy White Air Craft Cable 18 inches Non power side 3" canopy (available for cable mount only) AL Aluminum SW Stem white 24 24 inches 55 B SA 36 Power side 5" canopy Black Stem aluminum 36 inches Non power side 5" canopy #### SB ### For all other specify RAL# Stem black For all other specify length S##### For all other stem color specify RAL# When a caddy clips is required, please use the OPTIONS code to specify the ceiling type and size. CADDY CLIP OPTIONS CEILING TYPE 15/16 9/16 15/16 9/16 9/16 TG 15/16 TG 9/16 TB 15/16 TB 9/16 ST Tegular ceiling Tegular ceiling T-bar ceiling T-bar ceiling Screw slot ceiling File Name: VIA4-TW-PENDANT-DIRECT-INDIRECT-SPEC Page: 2 / 7
OPTICS HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - matte white side reflectors combined with High-Efficiency Lambertian Optic (HLO) shielding of diffusing 0.075" thick acrylic with up to 88% transmission and good source obscuration. Luminaire brightness is controlled by the flux-to-shielding area ratio. LIGHT SOURCE - LED AT 4000K High Output (3000 ) low output 4000K 38 2000 3000 5000 132 medium output 4000K 46 3000 3000 6000 130 high output 4000K 54.5 4000 3000 7000 128 ultra high ouput 4000K 62 4800 3000 7800 126 LUMINAIRE LENGTH Via 4 is made up of standard 4, 6, 8, 10 and 12 foot sections that may be joined together to create longer continuous run lengths. Exact run length must be noted in the product code. The minimum individual section available is 4 foot, and continuous run lengths can be ordered in 2 foot increments. All individual sections are joined together onsite using the joiner kits provided. LumenWerx offers joiner kits that are extremely simple to work with in the field and result in a fixture that appears virtually seamless with no light leak at any connection. Low Output (2000 ) low output 4000K 31 2000 2000 4000 129 medium output 4000K 39.5 3000 2000 5000 127 high output 4000K 48 4000 2000 6000 125 ultra high ouput 4000K 55.5 4800 2000 6800 123 Lumen Adjustment Factors 2700K 0.917 3000K 0.959 3500K 0.988 4000K 1.000 6500K 1.053 Custom linear array of alternating color temperature mid-flux LED s are mounted directly to the housing for optimal thermal performance. For the Duo products, a color temperature range from 2700K-6500K is achievable with color points on or below the black body curve. For the Sola products, a color temperature range from 2700K-3500K is controlled synchronously with intensity. consistency between fixtures is maintained to within 3SDCM. LEDs are operated at reduced drive current to optimize efficacy and lumen maintenance. All LED s have been tested in accordance with IESNA LM-80-08 and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise indicated. joining system Via 4 direct/indirect CHROMAWERX - TUNABLE WHITE 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 ANSI C78.377-2015 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 5700 K 6500 K Black body curve 0..32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 ChromaWerx Sola is single-channel control that dims output while warming the color temperature in a pre-determined relationship. A simple digital or analog control sends a common signal to dual output digital drivers, which are programmed to adjust a specially populated LED array to emulate the effect of dimming a filament source. Dimming range is programmable but the default option runs from 3500K at 100% of full power to 2700K at 5% of full power. CRI is maintained above 80 throughout the dimming range. File Name: VIA4-TW-PENDANT-DIRECT-INDIRECT-SPEC Page: 3 / 7
ChromaWerx Duo is two-channel control. It uses analog or digital protocols for synchronous control of both warm and cool LED arrays, enabling the user to set color temperature and light output. Commonly called tunable white, ChromaWerx two-channel control provides the range of warm (2700K) to cool (6500K) color that can be useful for helping to entrain circadian rhythms, stimulate alertness for improved educational and work productivity, and compensate for jet lag, among other applications. The ChromaWerx drivers are programmed to limit maximum light output and power usage across all color temperatures. CRI is maintained above 80. ELECTRICAL (Duo only) Factory-Set adjustable output current electronic driver with 120-277V AC line input. Using wall controls (optionally supplied by Lumenwerx) or an existing control system, both channels of LEDs are independently adjustable. Each driver can be independently addressed using the built-in RDM (Remote Device Management) in the field. Dimming down to 1% is attainable. Rated life (90% survivorship) of 50,000 hours at 50ºC maximum ambient temperature. At maximum driver load, efficiency<84%, PF>0.9, THD<20%. Dali (Duo Only) Factory-Set adjustable output current electronic driver with 120-277V AC line input. Using an existing DALI control system (supplied by others), one control channel adjusts the fixture color temperature, and the other control channel adjusts fixture brightness. Dimming down to 1% is attainable. Rated life (90% survivorship) of 50,000 hours at 50ºC maximum ambient temperature. At maximum driver load, efficiency<84%, PF>0.9, THD<20%. 0-10V (Sola only) Factory-Set adjustable output current electronic driver with 120-277V AC line input. Using a single 0-10V control signal, the fixture warms in color temperature as it dims down to 1% and 2700K. Rated life (90% survivorship) of 50,000 hours at 50ºC maximum ambient temperature. At maximum driver load, efficiency<84%, PF>0.9, THD<20%. MOUNTING OPTIONS Fixtures can be pendant-mounted, using aircraft cables, or stem-mounted. Unless otherwise specified, LumenWerx provides the following hardware: For cable-mounted fixtures - 53WAC36 (5" white canopy for all power mounting point, 3" white canopy for non power mounting point, and a 36" cable) For stem mounted fixtures - 55WSW18 (5" white canopy for all power mounting point, and non power mounting point, and a 18" white stem) Caddy clips, if required specify under OPTIONS For all other required mounting options, see our Pendant Mounting Guide at www.lumenwerx.com CONSTRUCTION Housing - Extruded Aluminum (0.095" nominal) up to 90% Recycled Content Interior brackets - Die formed cold rolled sheet steel 18 gauge thick Joining system - Die cast Zinc (0.95" nominal) Reflectors - Cold rolled steel 0.024 thick precisely die formed, 95% reflective matte white painted End caps - Die cast Aluminum (0.95" nominal) Hanger - Chromed Griplock securely attached with spring steel hardware in end caps and/or joiners Air craft cable suspension - 7x7 braids Aluminum air craft cable 0.06" thick Stem - 0.5" diameter threaded steel tube matte white or aluminum powder coating. Custom finishes are also available WEIGHT Via 4 4ft - 13.66lbs - 6.2kg Via 4 8ft - 27.53lbs - 12.5kg Via 4 12ft - 41.41lbs - 18.8kg CERTIFICATIONS ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA Standard C22.2 No. 250.0. WARRANTY For all ChromaWerx products, LumenWerx provides a three-year limited warranty of electrical and mechanical performance of the luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or replace defective luminaires or components at our discretion, provided they have been installed and operated in accordance with our specifications. Other limitations apply, please refer to the full warranty on our website. Wall controllers are covered by the manufacturer warranty. FINISH Interior - 95%, reflective matte powder coated white paint Exterior - matte white, matte black or aluminum powder coating. Custom finishes are also available. File Name: VIA4-TW-PENDANT-DIRECT-INDIRECT-SPEC Page: 4 / 7
WIRING DIAGRAM W W W. L U M E N W E R X. C O M RGBW (QUADRO) & TUNABLE WHITE (DUO) - Controller to fixture details Low voltage controller power Controls LVCP J-Box Electrical Controls J-Box J-Box Electrical J-Box 120V 120V DC Power supply Driver Driver IN Driver Driver LVCP OUT IN OUT To another fixture Fixture 1 Fixture 2 RED BK BARE - WT- BL BL DC+ 5 Vdc GROUND SHIELD + BACK PANEL LUMENWERX DIMMING 56% WALL CONTROLLER NICOLAUDIE - BLACK LUMENWERX DIMMING 56% WALL CONTROLLER NICOLAUDIE - WHITE NCB/NCW - NICOLAUDIE WALL CONTROL The Nicolaudie S.T.I.C.K. DE-3 is a wall mounted glass touch panel offered with a black or white face plate. It features a color selection wheel that can be used to choose which color or color combination is desired. By going in intensity control mode, the wheel can then be used to set the intensity. The STICK DE-3 can be used to control multiple Fixtures or Zones. Scenes and programs maybe loaded with the help of a computer and Nicolaudies ESA software. Controller s dimensions are 5 3/4"x4 3/16" x 7/16". WHEN A WALL CONTROLLER IS SUPPLIED, AT LEAST ONE FIXTURE MUST HAVE A DC POWER SUPPLY TO POWER THE CONTROLLER. File Name: VIA4-TW-PENDANT-DIRECT-INDIRECT-SPEC Page: 5 / 7
PERFORMANCE AT INDIRECT 500 LUMEN PER FOOT 500 LUMEN AT 80CRI - LOW OUTPUT 249 498 746 995 low output 2700K 33.5 2000 2000 4000 119 low output 3000K 32.5 2000 2000 4000 123 low output 3500K 32 2000 2000 4000 125 low output 4000K 31 2000 2000 4000 129 low output 6500K 30 2000 2000 4000 134 750 LUMEN AT 80CRI - MEDIUM OUTPUT 373 747 1120 medium output 2700K 43 3000 2000 5000 116 medium output 3000K 41.5 3000 2000 5000 120 medium output 3500K 40.5 3000 2000 5000 123 medium output 4000K 39.5 3000 2000 5000 127 medium output 6500K 38 3000 2000 5000 131 1000 LUMEN AT 80CRI - HIGH OUTPUT 498 995 1991 high output 2700K 52 4000 2000 6000 115 high output 3000K 50.5 4000 2000 6000 119 high output 3500K 49.5 4000 2000 6000 121 high output 4000K 48 4000 2000 6000 125 high output 6500K 46 4000 2000 6000 130 1200 LUMEN AT 80CRI - ULTRA HIGH OUTPUT 597 ultra high ouput 2700K 60 4800 2000 6800 113 1194 1792 2389 ultra high ouput 3000K 58 4800 2000 6800 117 ultra high ouput 3500K 57 4800 2000 6800 119 ultra high ouput 4000K 55.5 4800 2000 6800 123 ultra high ouput 6500K 53 4800 2000 6800 128 File Name: VIA4-TW-PENDANT-DIRECT-INDIRECT-SPEC Page: 6 / 7
PERFORMANCE AT INDIRECT 750 LUMEN PER FOOT 500 LUMEN AT 80CRI - LOW OUTPUT 308 615 923 1230 low output 2700K 41 2000 3000 5000 122 low output 3000K 40 2000 3000 5000 125 low output 3500K 39 2000 3000 5000 128 low output 4000K 38 2000 3000 5000 132 low output 6500K 36.5 2000 3000 5000 137 750 LUMEN AT 80CRI - MEDIUM OUTPUT 373 medium output 2700K 50.5 3000 3000 6000 119 746 1120 medium output 3000K 49 3000 3000 6000 123 medium output 3500K 48 3000 3000 6000 125 medium output 4000K 46 3000 3000 6000 130 medium output 6500K 45 3000 3000 6000 134 1000 LUMEN AT 80CRI - HIGH OUTPUT 498 high output 2700K 60 4000 3000 7000 117 995 1991 high output 3000K 58 4000 3000 7000 121 high output 3500K 56.5 4000 3000 7000 124 high output 4000K 54.5 4000 3000 7000 128 high output 6500K 52.5 4000 3000 7000 133 1200 LUMEN AT 80CRI - ULTRA HIGH OUTPUT 597 1194 1792 2389 ultra high ouput 2700K 68 4800 3000 7800 115 ultra high ouput 3000K 65.5 4800 3000 7800 119 ultra high ouput 3500K 64 4800 3000 7800 122 ultra high ouput 4000K 62 4800 3000 7800 126 ultra high ouput 6500K 60 4800 3000 7800 130 File Name: VIA4-TW-PENDANT-DIRECT-INDIRECT-SPEC Page: 7 / 7