Engine Powered Boom Lift Service Training BL202-1-18 January 30 Feb. 1 McConnellsburg, PA BL202-2-18 February 20 22 Atlanta, GA BL202-3-18 March 6 8 Houston, TX BL202-4-18 March 20 22 Las Vegas, NV BL202-5-18 April 10 12 Riverside, CA BL202-6-18 April 24 26 Las Vegas, NV BL202-7-18 May 15-17 Houston, TX BL202-8-18 June 12 14 Riverside, CA BL202-9-18 June 19 21 Atlanta, GA BL202-10-18 July 17 19 McConnellsburg, PA BL202-11-18 August 7 9 Houston, TX BL202-12-18 August 14 16 McConnellsburg, PA BL202-13-18 October 9 11 Houston, TX BL202-14-18 October 23 25 Atlanta, GA BL202-15-18 October 23 25 Las Vegas, NV BL202-16-18 November 6 8 Houston, TX BL202-17-18 December 11 13 McConnellsburg, PA Ultra-Boom Service Training 1200SJP, 1350SJP, 1250AJP UB204-1-18 February 20 22 Riverside, CA UB204-2-18 February 27 March 1 Las Vegas, NV UB204-3-18 March 20 22 Atlanta, GA UB204-4-18 April 10 12 McConnellsburg, PA UB204-5-18 May 1 3 Las Vegas, NV UB204-6-18 June 5 7 McConnellsburg, PA UB204-7-18 August 7 9 Riverside, CA UB204-8-18 September 18 20 Las Vegas, NV UB204-9-18 October 2 4 McConnellsburg, PA Electric Powered Boom Lift Service Training The BL209 class covers the electric booms with AC drive BL209-1-18 January 30 Feb. 1 McConnellsburg, PA BL209-2-18 February 13 15 Atlanta, GA BL209-3-18 February 27 Mar. 1 Houston, TX BL209-4-18 March 6 8 Las Vegas, NV BL209-5-18 May 1 3 Houston, TX BL209-6-18 July 31 August 2 Houston, TX BL209-7-18 August 14 16 McConnellsburg, PA BL209-8-18 September 18 20 Atlanta, GA BL209-9-18 October 9 11 Riverside, CA BL209-10-18 October 16 18 Houston, TX BL209-11-18 December 4 6 McConnellsburg, PA ES and LE Scissors Service Training The ES Scissors (SL202) Class is one and half days in length starting Tuesday at 8 AM and ending Wednesday at 12 PM. The LE Scissors (SL214) Class starts on Wednesday at 1 PM and ends at 5 PM on Thursday. SL202-1-18 August 28-29 Atlanta, GA SL214-1-18 August 29-30 Atlanta, GA SL202-2-18 November 13 14 Houston, TX SL214-2-18 November 14 15 Houston, TX SL202-3-18 December 4 5 McConnellsburg, PA SL214-3-18 December 5 6 McConnellsburg, PA ES and R Scissors Service Training The ES Scissors (SL202) Class is one and half days in length starting Tuesday at 8 AM and ending Wednesday at 12 PM. The R Scissors (SL217) Class starts on Wednesday at 1 PM and ends at 5 PM on Thursday. SL202-4-18 February 6 7 Atlanta, GA SL217-4-18 February 7 8 Atlanta, GA SL202-5-18 April 10 11 McConnellsburg, PA SL217-5-18 April 11 12 McConnellsburg, PA SL202-6-18 September 11-12 Atlanta, GA SL217-6-18 September 12-13 Atlanta, GA 1850SJ Service Training UB206-1-18 June 19 21 McConnellsburg, PA UB206-2-18 September 18 20 McConnellsburg, PA UB206-3-18 October 16-18 McConnellsburg, PA 1500SJ Service Training UB205-1-18 July 10-12 McConnellsburg, PA 1500AJP Service Training UB207-1-18 July 24-26 McConnellsburg, PA Technician Fundamentals Training TF151-1-18 January 30 Feb. 1 Atlanta, GA TF151-2-18 July 31 August 2 Riverside, CA TF151-3-18 September 11-13 McConnellsburg, PA REV 2_12.5.17 Page 1
PLEASE READ THE FOLLOWING JLG AND SKYTRAK TELEHANDLER INFORMATION BEFORE ENROLLING In 2015 JLG introduced the new Series of Telehandlers and enhanced the SkyTrak Telehandlers. One major change for models was the addition of Tier IV Final Engines. The courses listed in this schedule cover only the JLG (Not G ) Series and SkyTrak telehandlers with Tier IV Final Engines. Please contact JLG Training to arrange training for non-tier IV equipped machines. JLG AND SKYTRAK TELEHANDLER CLASSES JLG Telehandler Service Training The JLG Telehandler Class TL221 covers the JLG Telehandler models 642, 943, 1043, 1055, and 1255 with Tier IV Final Engines. TL221-1-18 February 6 8 McConnellsburg, PA TL221-2-18 May 8 10 Houston, TX TL221-3-18 June 19 21 Las Vegas, NV TL221-4-18 August 21 23 Atlanta, GA TL221-5-18 November 13 15 Riverside, CA SkyTrak Telehandler Service Training The SkyTrak Telehandler Class TL215 covers models 6036, 6042, 8042, 10042 and 10054 with Tier IV final engines. TL215-1-18 March 13-15 McConnellsburg TL215-2-18 April 3 5 McConnellsburg, PA TL215-3-18 June 12 14 Las Vegas, NV TL215-4-18 August 21 23 McConnellsburg, PA TL215-5-18 September 25 27 Atlanta, GA Regrettably course cancellations and changes can occur for various reasons. All reasonable attempts will be made to conduct the courses as scheduled. However, in the event a class must be cancelled, customers will be notified 14 days prior to the class start date whenever possible. Regrettably, JLG cannot be responsible for any incurred expenses due to course cancellations, so please plan your travel accordingly. To inquire about training not listed here or model-specific training at your location, Please contact JLG Training at 877-554 5438 To enroll in any of these classes, please go to JLG University at jlgu.jlg.com. REV 2_12.5.17 Page 2
Technician Training: Basic Electrical The Electrical Fundamentals course is a 4-day class that covers the fundamentals of electrical. Lessons learned on the simulator are applied to JLG equipment. This course is designed to provide the fundamental technical knowledge needed to maintain JLG equipment. Participants will learn to read electrical schematics, the purpose of various electrical components, and how electrical components and circuits work. This is a new course offering from JLG and will only be offered in McConnellsburg, PA. To enroll, select the class that fits your schedule from the schedule shown below, and then go to JLG University (JLGU) at jlgu.jlg.com to enroll. Class ID Classroom Session Dates Class Locations TF223-1-18 May 15 18 McConnellsburg, PA TF223-2-18 August 21-24 McConnellsburg, PA REV 2_12.5.17 Page 3
Technician Training: Basic Hydraulics The Hydraulic Fundamentals course is a 4-day class that covers the fundamentals of hydraulics using the worldclass hydraulic training simulator built by Fluid Power Training Institute in Salt Lake City. Lessons learned on the simulator are applied to JLG equipment. This course is designed to provide the fundamental technical knowledge needed to maintain JLG equipment. Participants will learn to read hydraulic schematics, the purpose of various hydraulic components, and how hydraulic components and circuits work. Participants will spend about 50% of the classroom time on the simulators and JLG machines building hydraulic circuits, measuring pressures, and adjusting the hydraulic systems on JLG equipment. This is a new course offering from JLG and will only be offered in McConnellsburg, PA. To enroll, select the class that fits your schedule from the schedule shown below, and then go to JLG University (JLGU) at jlgu.jlg.com to enroll. Class ID Classroom Session Dates Class Locations TF202-1-18 May 1 May 4 McConnellsburg, PA TF202-2-18 July 31 August 3 McConnellsburg, PA REV 2_12.5.17 Page 4
PLEASE READ THE FOLLOWING TRAIN-THE-TRAINER PROGRAM DESCRIPTION BEFORE ENROLLING JLG now offers four separate programs: Mobile Elevating Work Platform (MEWP) and Telehandler Train-The-Trainer BLENDED Program Mobile Elevating Work Platform (MEWP) and Telehandler Train The-Trainer CLASSROOM ONLY Program Mobile Elevating Work Platform (MEWP) Train-The-Trainer CLASSROOM ONLY Program Telehandler Train-The-Trainer CLASSROOM ONLY Program Mobile Elevating Work Platform (MEWP) and Telehandlers Train-The-Trainer BLENDED Program The Mobile Elevating Work Platform (MEWP) and Telehandler Train-The-Trainer BLENDED program consists of an instructor led classroom session and instructor facilitated online pre-classroom work. This blended program qualifies successful participants to teach the JLG MEWP Operator Training Program and the JLG Telehandler Operator Training program. The Mobile Elevating Work Platform (MEWP) and Telehandler BLENDED program consists of four weeks of online class work followed by a three-day classroom session in McConnellsburg, PA. The primary topics covered during the course are: Week 1 Online Pre-course work: Fundamentals of Training Training and Evaluation Techniques, Presentation Skills Week 2 Online Pre-course work: Mobile Elevating Work Platform (MEWP) Operator E-Learning, Regulations & Standards, MEWP Selection Week 3 Online Pre-course work: Telehandlers Operator E-Learning, Regulations & Standards, Telehandler Selection Week 4 Online Pre-course work: Make Up Time Participants use this week to finish any incomplete assignments Week 5 Classroom and Hands-on: Three day classroom session in McConnellsburg, PA Operator evaluation, Training Skills, Hands-on operation Participants will spend about 6 hours per week during the first 3 weeks of online sessions; week 4 should require little or no time from participants. Participants that do not complete the online assignments will not pass the program! To enroll in the Mobile Elevating Work Platform (MEWP) and Telehandler Train-The-Trainer BLENDED Program, choose the date of the classroom session you want to attend from the schedule on page 4, and then go to JLG University (JLGU) at jlgu.jlg.com to enroll. Enrolling in the classroom session automatically enrolls you in the online pre-classroom sessions, which starts four weeks prior to the classroom session. The dates for the online sessions are listed next to the classroom dates on page 4. The instructor will notify you by e-mail when the online sessions are open and ready to start. Please review details about our BLENDED Train-The-Trainer program at JLG.com/training/train-the-trainer-program REV 2_12.5.17 Page 5
Mobile Elevating Work Platform (MEWP) and Telehandlers Train-The-Trainer BLENDED Program Mobile Elevating Work Platform (MEWP) and Telehandler Train-The-Trainer Blended Course 2018 Schedule Class ID Course Type Online Session Dates Classroom Session Dates McConnellsburg, PA ONLY TT301-1-18 Blended Course February 19 March 17 March 20 22 TT301-2-18 Blended Course March 5 March 31 April 3-5 TT301-3-18 Blended Course March 26 April 21 April 24 26 TT301-4-18 Blended Course April 9 May 5 May 8 10 TT301-5-18 Blended Course May 14 June 9 June 12 14 TT301-6-18 Blended Course May 21 June 16 June 19-21 TT301-7-18 Blended Course August 13 September 8 September 11 13 TT301-8-18 Blended Course September 10 October 5 October 9-11 TT301-9-18 Blended Course September 24 October 20 October 23 25 TT301-10-18 Blended Course October 1 October 27 October 30 - November 1 TT301-11-18 Blended Course October 8 November 3 November 6 8 TT301-12-18 Blended Course October 15 November 10 November 13 15 REV 2_12.5.17 Page 6
Mobile Elevating Work Platform (MEWP) and Telehandler Train-The-Trainer CLASSROOM-ONLY Program The Mobile Elevating Work Platform (MEWP) and Telehandler Train-the-Trainer CLASSROOM-ONLY program is a 4.5 day classroom only program that qualifies successful participants to teach the JLG MEWP and Telehandler Operator Training Programs. The class objectives are: Boom and Scissor Operator training and evaluation Trailer Mounted Boom and Vertical lift Operator training and evaluation Telehandler (Class 7) Operator training and evaluation Standards and Regulations and Fundamentals of Training Presentation Skills and Hands-on activities The Mobile Elevating Work Platform (MEWP) and Telehandler Train-the-Trainer CLASSROOM-ONLY program is offered at the McConnellsburg PA location only. To enroll, select the class that fits your schedule from the schedule shown below. Then go to JLG University (JLGU) at jlgu.jlg.com to enroll. Mobile Elevating Work Platform (MEWP) and Telehandler Train-The-Trainer CLASSROOM-ONLY 2018 SCHEDULE Class ID Classroom Session Dates Class Locations TT301C-1-18 April 30 May 4 McConnellsburg, PA TT301C-2-18 July 16-20 McConnellsburg, PA REV 2_12.5.17 Page 7
Mobile Elevating Work Platform (MEWP) Train-The-Trainer CLASSROOM-ONLY Program The Mobile Elevating Work Platform (MEWP) Train-the-Trainer CLASSROOM-ONLY program is a three day classroom only program that qualifies successful participants to teach the JLG Mobile Elevated Work Platform (MEWP) Operator Training Program only (NOT Telehandlers). The primary topics covered during the course are: Day 1: Operator Training and Evaluation Day 2: Standards and Regulations and Fundamentals of Training Day 3: Presentation Skills and Hands-on activities The Mobile Elevating Work Platform (MEWP) Train-the-Trainer CLASSROOM-ONLY program is offered at the McConnellsburg PA location only. To enroll, select the class that fits your schedule from the schedule shown below. Then go to JLG University (JLGU) at jlgu.jlg.com to enroll. Mobile Elevating Work Platform (MEWP) Train-The-Trainer CLASSROOM-ONLY 2018 SCHEDULE Class ID Classroom Session Dates Class Locations TT311-1-18 March 27-29 McConnellsburg, PA TT311-2-18 April 17-19 McConnellsburg, PA TT311-3-18 June 5 7 McConnellsburg, PA TT311-4-18 September 18-20 McConnellsburg, PA TT311-5-18 October 16-18 McConnellsburg, PA REV 2_12.5.17 Page 8
Telehandler Train-The-Trainer CLASSROOM-ONLY Program The Telehandler Train-the-Trainer CLASSROOM-ONLY program is a three day classroom only program that qualifies successful participants to teach the JLG Telehandler Operator Training Program only (NOT Mobile Elevating Work Platform). The primary topics covered during the course are: Day 1: Operator Training and Evaluation Day 2: Standards and Regulations and Fundamentals of Training Day 3: Presentation Skills and Hands-on activities The Telehandler Train-the-Trainer CLASSROOM-ONLY program is offered at the McConnellsburg PA location only. To enroll, select the class that fits your schedule from the schedule shown below. Then go to JLG University (JLGU) at jlgu.jlg.com to enroll. Telehandler Train-The-Trainer CLASSROOM-ONLY 2018 SCHEDULE Class ID Classroom Session Dates Class Locations TT321-1-18 May 15 17 McConnellsburg, PA TT321-2-18 August 21-23 McConnellsburg, PA REV 2_12.5.17 Page 9
TRAINING CLASS HOURS For all JLG Factory Training Centers in McConnellsburg, PA, Atlanta, GA, Houston, TX, Las Vegas, NV, and Riverside, CA. 5 Day Class Monday through Friday o Starts at Starts at 8:00 AM (Each Day) o Ends at 5:00 PM (Each Day) 4.5 Day Class Monday through Thursday o Starts at Starts at 8:00 AM (Each Day) o Ends at 5:00 PM (Each Day) Friday (Half Day) Starts at 8:00 AM Ends at 12:00 PM 4 Day Class Tuesday through Friday o Days 1 4 Starts at 8:00 AM Ends at 5:00 PM 3 Day Class Tuesday through Thursday o Starts at 8:00 AM (Each Day) o Ends at 5:00 PM (Each Day) 1.5 Day Classes Tuesday through Wednesday o Day 1 (Full Day) Starts at 8:00 AM Ends at 5:00 PM o Day 2 (Half Day) Starts at 8:00 AM Ends at 12:00 PM Wednesday through Thursday o Day 1 (Half Day) Starts at 1:00 PM Ends at 5:00 PM o Day 2 (Full Day) Starts at 8:00 AM Ends at 5:00 PM When making travel arrangements take into consideration the class end times, especially if you are traveling by air. It will take about two hours to drive from McConnellsburg to any of the major airports and you need to be at the airport one to two hours prior to your flight departure time. You may not pass the class if you choose to leave early. REV 2_12.5.17 Page 10
DRESS CODE No open toed shoes Casual business attire or work uniforms Knee length shorts are allowed SAFETY EQUIPMENT Safety glasses will be provided Safety shoes are only required for the McConnellsburg plant tour (OSHA toes provided) Fall arrest harnesses are provided CLASS MEALS AND REFRESHMENTS Snacks, coffee, water, and soda are provided each day Lunch is provided each day SHUTTLE SERVICE Shuttle service is provided for people attending the service training classes ONLY at the McConnellsburg, PA Training Center o The shuttle leaves from the Homewood Suites Hotel, Hagerstown, MD at 7:00 AM and returns at the end of each training day REV 2_12.5.17 Page 11
Hotel and Training Center Information For hotel information go to the JLG University home page at jlgu.jlg.com. At the top of the page select Training Information. In the drop down box select Training Locations. REV 2_12.5.17 Page 12