Demag crane sets Tailored component sets for suspension and single and double-girder overhead travelling cranes
Individual configurations and time-saving assembly Demag crane sets tailored to meet specific needs 39429-3 Demag crane sets are complete, tailored component packages for efficient suspension and single and doublegirder overhead travelling crane solutions that save you time. They provide you with quality, efficiency and reliability at the highest level. Every component reflects decades of Demag expertise in all aspects of crane design. Demag crane sets are based on standardised components for simple and user-friendly assembly on the plug-and-play principle. EPDE / EKDE suspension cranes The alternative without columns for optimum utilisation of the available space EPKE single-girder overhead travelling cranes The favourable solution for light loads and small crane spans EKKE single-girder overhead travelling cranes Maximum stability for a low deadweight ZKKE double-girder overhead travelling cranes For high load capacities and large spans 2
39344-1 Optimum match 1 Crab or travelling hoist with drive 2 Crane girder * 3 Crane girder end plates 4 End carriage 5 Travel drive 6 Control pendant or radio control 7 Crane electrical equipment 8 Travelling hoist electrical equipment - with lifting limit switch - with load detector 9 Clamp-fitted buffers 10 C-rail assembly 11 Power supply 12 Hoist power supply * not included in the crane set 2 10 12 5 Energy chain system 11 5 9 3 4 7 4 3 9 1 8 6 6 3
Perfection in every detail for maximum reliability in planning and assembly 39428-3 End carriages and travel units The end carriages offer great stability thanks to their torsionally rigid, enclosed box-section profile with a reinforced connection plate and welded diaphragm plate. At the same time, they feature engineering tolerances in the connection to the crane girder. The precise travel wheel arrangement and exact adjustment to the crane span dimension thanks to interchangeable spacer elements ensure optimum travel characteristics for minimum wear. Maintenance-free drives with anti-friction bearings lubricated for life and travel wheels made of spheroidal graphite cast iron provide for favourable travel characteristics. Hoist unit The Demag DR rope hoist with load capacities up to 50 tonnes offers high handling rates and efficiency. Its compact design with minimum approach dimensions and a large hook path facilitate optimum utilisation of the available space and height. Infinitely variable lifting and travel speeds ensure low-sway handling and gentle positioning, which provides for greater safety and more convenient operation. 39559 40242-6 39472 38926-2 4
39343-2 Power supply The Demag DCL compact conductor line for 4 to 7 poles and screw-type connections ensures long-term power supply and minimises unplanned downtime. The preassembled elements for simple assembly or replacement of current collector trolleys or complete straight sections provide optimum serviceability. IP 23 or IP 24 high protection against accidental contact with sealing lip and integrated expansion compensation ensure optimum safety. Control Safe, fatigue-free handling thanks to ergonomically designed control units. The crane can be controlled both by means of a suspended DLC control pendant that can travel separately on the crane as well as via the DRC radio control system. This is available as a hand-held transmitter with proportional pushbuttons and as a joystick transmitter. Both feature variable frequency radio operation for interference-free transmission and reception. 37371-1 39330-1 39211-1 39589-3 5
Easy planning and ordering fast, simple and convenient 39349-2 Partners from the very beginning Demag Cranes & Components is not only a strong partner for perfect technical solutions to meet your in-house logistics requirements. We also provide our partners and customers with support during the planning phase from the very beginning. You can use the fax form on the right for initial planning. On the basis of your fax enquiry, our sales engineers can make you an initial quotation or can contact you for any further specifications. After you have logged into Crane Designer, you can select crane configurations online to meet your needs and order them direct. Quite simply and without any need for installation or hard disk space on your computer. Visit our virtual planning consultant at www.demag-cranedesigner.com. Planners and plant designers can also be provided with our technical documents as conventional brochures or in electronic form on CD-ROM. This enables you to plan standard cranes using Demag crane sets precisely right from the start. 37399 6
Demag Cranes & Components GmbH Crane Components Product Management (PCM 112) Ruhrstrasse 28 58300 Wetter/Germany Fax enquiry: +49 (0) 2335 92-2339 Please send the quote to: Company PO Box/street Town/post code Contact Telephone/extension Fax Email Crane set project overview Crane type Suspension crane Single-girder overhead travelling crane Double-girder overhead travelling crane Load capacity Span Crane runway length Lifting height min. max. kg m m m m Control Cable-connected Radio-controlled Sketch of the building with dimensions, if available Special features 7
Demag Cranes & Components GmbH Ruhrstrasse 28 58300 Wetter/Germany Phone: +49 (0) 2335 92-2922 Fax: +49 (0) 2335 92-2339 Email: info@demagcranes.com www.demagcranes.com 0911 EN/DE 213 584 44 701 IS 100 No liability for errors or omissions. Subject to change. Printed in Germany S+S/310112/1T 8