Excellence is the constant striving towards perfection.

Made in Italy

Excellence is the constant striving towards perfection.

MOVING LIFE A company constantly on the move, celebrating 30 years of history and always looking forward to the future: for two generations, innovation and research have been the DNA of TAU. Each TAU product is the result of the application of the newest technologies to a very simple idea: make everyday life a little easier. While browsing through our website, you will discover a wide range of sliding and swing gate operators, garage door openers, traffic barriers, automatic doors, parking guards, tubular motors, rolling shutter motors and window openers. MADE IN ITALY

EMOTIONAL DESIGN Italian style at its best: a perfect blend of emotional design, rational appeal, technology and attention to details. INSTALLING COMFORT Enjoy enhanced comfort and security by installing TAU Gate Operators in your home.

SAFETY FIRST Look for the products with the green EN 12445-12453 icon in the catalogue. The EN logo indicates that the gate operator has been tested in accordance with EN 12445-23453 (Safety in use of power operated doors). The use of products with the green EN 12445-12453 icon simplifies the task of issuing the EC Declaration of Conformity.

FOR A SAFER HOME Technology must be safe, clean and easy for people to use. TAU products have been designed to enhance Customer satisfaction. Tranquillity of use is guaranteed by the sophisticated prevention systems installed in all products and tested for years at our laboratories. The experience of our technicians and constant testing in the most extreme conditions form the bases for making our systems ideal for integration in all situations. Rigorous product testing and design are the guarantee of safety for everyday use. These inspections and checks are applied to the mechanical construction of parts through to the production process. In fact TAU also means quality of work and attention to the human resources employed for business development.

NEWS New family of controllers DIAMOND TAU unveils the new family of controllers DIAMOND. Based on the innovative technology ADAPTA, the new family of electronic control units provides superior performances and capabilities to a wide range of TAU DC Gate Operators and Barriers. Among the functional highlights are: Technology Adapta : the microprocessor acquires and monitors the data from the gate operator and, in case of changes due to seasonal climate conditions or to the wear and tear of the operator is capable to make adaptive decisions and adjust the working parameters in real time Solar-Friendly Technology: the electronic control boards of the DIAMOND family have been developed to minimize power consumption during standby times in order to increase battery life and optimize solar performances Technology Made Easy: the technology of the electronic control boards of the DIAMOND family is designed with simplicity in mind: easy to install, user-friendly interface, easy to operate. Its innovative one-touch system makes programming the easiest task. Advanced Users: thanks to the TAUPROG handheld device a wide range of operating parameters can be adjusted to fit individual requirement. State of the art: the new family of controllers DIAMOND come packed with useful functions such as on-board battery charger, 2-channel radio receiver, soft-start, soft-stop, intelligent obstacle detection, vehicle and pedestrian opening, adjustable auto close, diagnostic center, digital limit switches and much more. LUXE automatic barrier and EASY12QR electromechanical gate operator with encoder (see pages 88 and 44) are the first TAU products to adopt such technology. The new family of controllers DIAMOND will progressively power all TAU DC Gate Operators and Barriers.

Preview News on Tau's Products MASTER18QR Sliding DC gate operator with encoder, complete with electronic control unit. Maximum gate weight 1800 kg. Page 18 EASY12QR Electromechanical DC gate operator with articulated arm, built-in electronic control unit and radio receiver. Maximum gate leaf 2,3 m. Page 44 RBLO-E 230V automatic barrier for booms up to 3 m, painted cabinet, complete with electronic control unit. Page 84 RBLO-X Fast automatic barrier for elliptical booms up to 4m, painted or stainless steel cabinet, complete with electronic control unit. Page 86

Preview News on Tau's Products LUXE Automatic barrier for booms up to 7 m, painted or stainless steel cabinet, with built-in electronic control unit, radio receiver and battery charger. Page 88 PARKM Manual park space saver without motor. Page 91 T-STOP Oil-hydraulic rising bollard Page 92 PF40 40 Watt photovoltaic panel complete with adjustable stainless steel bracket. Page 126 New plastic covers for TAU electronic control boards. Starting from page 120" Page 120

Table of content SLIDING GATES T-One Page 12 Master Page 18 Big Page 22 SWING GATES Arm Page 28 R18 - R18benc Page 36 R30 - R40 Page 40 Easy Page 44 Zip Page 48 GARAGE DOORS T-Sky Page 54 Spin Page 58 COMMERCIAL B12 Page 64 Speed Page 68 F10 Page 70 AUTOMATIC DOORS Brink Page 74 Door Page 76 DoorX Page 78 BARRIERS Rblo Page 84 LUXE Page 88 Park Page 91 T-STOP Page 92 WINDOWS & SHUTTERS T-Win Page 96 Mrcm Page 98 MF30 Page 102 NEWS! Discover Tau s latest news on your smartphone. See page 132 ACCESSORIES Transmitters Page 106 Optic Page 112 Fot Page 113 Rta Page 114 Lamp Page 115 Safety Edges Page 116 T-key Page 118 Control Units Page 120 Solar Energy Page 126 Force Meters Page 128 Expo Page 129 Specs Page 130 Sales Terms page 131

SLIDING GATES T-One Master Big MADE IN ITALY

24 VOLT GATE OPERATOR T-ONE For gates up to 300 Kg 3B 350T-ONE3B DC sliding gate operator with encoder, complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 300 kg. Features: residential / apartment building use for gates up to 300 kg low voltage DC gate operator encoder technology (no limit switches required) electronic control unit with built-in receiver only available in the kit version Pros: obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery external emergency release available (optional, P/N 650ESE03) soft start and soft stop Technical features Power supply Motor power supply Motor Absorption Absorbed power Max. operating speed T-ONE3B 230 V AC (50-60 Hz) 24 V DC 1,7 A 80 W 14 m/min Duty cycle 100 % Max. thrust 320 N Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 44 Max. gate leaf weight 300 kg Pinion module Module 4 Protected control Board: The electronic control unit is well protected from the outside within its plastic shell. Safety: Optical encoder technology as standard on all versions in order to grant a continued and reliable obstacle control. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 12

T-ONEKIT3BT Complete automation kit for sliding gates up to 300 kg, with 350T-ONE3B gate operator Accessories included in the kit: 92,9 288,3 163,5 202,7 308,5 900OPTIC 300T-KEY aluminium + LED TSL 250ANTD 900LAMP5 250K-SLIMRP C-CRT Accessories 200KB3 Battery charger and backup battery kit 650ESE03 External emergency release device (flush-mounted) with tamper-proof housing and 4 m cable 400CPO Counterplate 900KITCF15 Safety edge kit l=1,5 m 400CPOR Adjustable counterplate 900TWC Wireless safety edge transmitter 400CN Steel core, fibreglass reinforced, 22x22 nylon rack (Module 4, max 800 kg) 900TWM Wireless safety edge master receiver 400VP40 Screws for 400CN (40 screws per pkg) S-350K120M00 Replacement electronic control unit Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 13

12 VOLT GATE OPERATOR T-ONE For gates up to 500 Kg 5B 350T-ONE5B DC sliding gate operator with encoder, complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 500 kg Features: residential / apartment building use for gates up to 500 kg low voltage DC gate operator optical encoder technology (no limit switches required) electronic control unit with built-in two-channel receiver built-in battery charger Pros: obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery 35% faster than the 230 V version intensive use, ideal for use on apartment buildings and public entrances external emergency release available (optional, P/N 650ESE03) soft start and soft stop Technical features Power supply Motor power supply Motor Absorption Absorbed power Max. operating speed T-ONE5B 230 V AC (50-60 Hz) 18 V DC 0,85 A 250 W 14 m/min Duty cycle 100 % Max. thrust 980 N Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 44 Max. gate leaf weight 500 kg Pinion module Module 4 Protected control board: The electronic control unit is well protected from the outside within its plastic shell Safety: Optical encoder technology as standard on all versions in order to grant a continued and reliable obstacle control. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 14

T-ONEKIT5BT Complete automation kit for sliding gates up to 500 kg, with 350T-ONE5B gate operator Accessories included in the kit: 92,9 288,3 163,5 202,7 308,5 900OPTIC 300T-KEY aluminium + LED TSL 250ANTD 900LAMP4 250K-SLIMRP C-CRT Accessories 200BATT 12 V back-up battery, 7,2 Ah 650ESE03 External emergency release device (flush-mounted) with tamper-proof housing and 4 m cable 400CPO Counterplate 900KITCF15 Safety edge kit l=1,5 m. 400CPOR Adjustable counterplate 900TWC Wireless safety edge transmitter 400CN Steel core, fibreglass reinforced, 22x22 nylon rack (Module 4, max 800 kg) 900TWM Wireless safety edge master receiver 400VP40 Screws for 400CN (40 screws per pkg) S-350K125M00 Replacement electronic control unit Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 15

230 VOLT GATE OPERATOR T-ONE For gates up to 1200 Kg 5-8-XL 350T-ONE5 230 V sliding gate operator with encoder and electromechanical limit switch, complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 500 kg 350T-ONE8 230 V sliding gate operator with encoder and electromechanical limit switch, complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 800 kg 350T-ONEXL 230 V sliding gate operator with encoder and electromechanical limit switch, complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 1200 kg Features: residential / apartment building use for gates up to 500 / 800 / 1200 kg 230 V gate operator built-in mechanical limit switches, magnetic limit switches available (optional) optical encoder technology for obstacle detection electronic control unit with built-in two-channel receiver quick programming Pros: quick and easy installation obstacle detection and crush prevention in accordance with EN 12445-12453 standards* suitable for large sliding gates high torque and power external emergency release available (optional, P/N 650ESE03) Technical features T-ONE5 T-ONE8 T-ONEXL Power supply 230 V AC (50-60 Hz) 230 V AC (50-60 Hz) 230 V AC (50-60 Hz) Motor power supply 230 V AC 230 V AC 230 V AC Absorption 1,2 A 1,3 A 2,1 A Absorbed power 220 W 240 W 340 W Speed maneuver 10,5 m/min 10,5 m/min 10,5 m/min Duty cycle 40 % 40 % 40 % Max. thrust 920 N 1160 N 1160 N Operating temperature -20 C +55 C -20 C +55 C -20 C +55 C Motor thermal protection 150 C 150 C 150 C Degree of protection IP 44 IP 44 IP 44 Max. gate leaf weight 500 kg 800 kg 1200 kg Pinion module Module 4 Module 4 Module 4 Control electronics: Quick and intuitive programming thanks to signalling LEDs. Twochannel radio receiver built-in the control unit (433,92 MHz, 24 codes to memorize) Installation: Safer installation thanks to the 4 fixing points and to the practical height adjustment. The cover is made of nonscratch UVA-resistant engineering plastics. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 16

110 VOLT AVAILABLE T-ONEKIT5T Complete automation kit for sliding gates up to 500 kg, with 350T-ONE5 gate operator T-ONEKIT8T Complete automation kit for sliding gates up to 800 kg, with 350T-ONE8 gate operator 92,9 288,3 T-ONEKITXLT Complete automation kit for sliding gates up to 1200 kg, with 350T-ONEXL gate operator 163,5 202,7 308,5 Accessories included in the kit: 900OPTIC 300T-KEY 250ANTD 900LAMP3 250K-SLIMRP C-CRT aluminium + LED TSL Accessories 400CPO Counterplate 900KITCF15 Safety edge kit 1,5 m. 400CPOR Adjustable counterplate 900TWC Wireless safety edge transmitter 400CN Steel core, fibreglass reinforced, 22x22 nylon rack (Module 4, max 800 kg) 900TWM Wireless safety edge master receiver 400VP40 Screws for 400CN (40 screws per pkg) S-350K580M00 Replacement electronic control unit 650ESE03 External emergency release device (flush-mounted) with tamper-proof housing and 4 m cable 400FCM Magnetic limit switches Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 *The use of the wireless safety edge system is necessary in order to certify an installation when the gate weight is more than 500 kg 17

12 VOLT GATE OPERATOR MASTER For gates up to 1800 Kg 500MASTER12Q DC sliding gate operator with encoder, complete with electronic control unit. Maximum gate weight 1200 kg. 500MASTER18QR DC sliding gate operator with encoder, complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 1800 kg. Features: apartment building / commercial use for gates up to 1800 kg low voltage DC gate operator optical encoder technology built-in battery charger Pros: obstacle detection and crush prevention in accordance with EN 12445-12453 standards* works even during power outage thanks to the optional backup battery fast operating speed intensive use, ideal for use on apartment buildings and public entrances external emergency release available (optional, P/N 650ESE02) Technical features MASTER12Q MASTER18QR Power supply 230 V AC (50-60 Hz) 230 V AC (50-60 Hz) Motor power supply 18 V DC 18 V DC Motor Absorption 2,6 A 2,9 A Absorbed power 300 W 360 W Max. operating speed 14 m/min 14 m/min Duty cycle 100 % 100 % Max. thrust 1350 N 1350 N Operating temperature -20 C +55 C -20 C +55 C Motor thermal protection - - Degree of protection IP 44 IP 44 Max. gate leaf weight 1200 kg 1800 kg Pinion module Module 4 Module 4 Protected control board: The electronic control unit is well protected from the outside within its plastic shell Practical: The manual release is easy, intuitive and protected by a personal key. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 18

Accessories 325 550CPM Counterplate 200BATT 12 V back-up battery, 7,2 Ah 93 550CPMR Adjustable counterplate 650ESE02 External emergency release device (flush-mounted) with tamper-proof housing and 4 m cable 180,3 221,3 360 900KITCF15 Safety edge kit l=1,5 m. S-500K123M00 Replacement electronic control unit (MASTER12Q) 900KITCF Safety edge kit l=2 m. S-500K126MA Replacement electronic control unit (500MASTER18QR) 900TWC Wireless safety edge transmitter 400CFZ12 Steel rack 30x12, complete with screws (Module 4, max 2000 kg) 900TWM Wireless safety edge master receiver 400CFZ22 Steel rack 22x22 (Module 4, max 3000 kg) C-CRT Warning signal 400VSF20 Screws and brackets for 400CFZ22 (40 units per pkg) 250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters C-TARG Aluminium CE mark label, self adhesive *The use of the wireless safety edge system is necessary in order to certify an installation when the gate weight is more than 500 kg Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 19

230 VOLT GATE OPERATOR MASTER 20 For gates up to 2000 Kg 500MASTER20QR 230 V sliding gate operator with encoder and limit switch, complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 2000 kg. 500MASTER20QM 230 V sliding gate operator with encoder and magnetic limit switches, complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Maximum gate weight 2000 kg. 500MASTER20T 400 V three-phase sliding gate operator with encoder without electronic control unit. Maximum gate weight 2000 kg Features: commercial use for gates up to 2000 kg 230 V (MASTER20QR/QM) and 400 V (MASTER20T) gate operators optical encoder technology for obstacle detection (MASTER20QR/QM only) electronic brake irreversible gate operator lever manual release mechanism Pros: obstacle detection and crush prevention suitable for large sliding gates high torque and power thanks to the three-phase 400 Vac version (MASTER20T) external emergency release available (optional, P/N 650ESE02) Technical features MASTER20QR/QM MASTER20T Power supply 230 V AC (50-60 Hz) 400 V AC (50-60 Hz) Motor power supply 230 V AC 400 V AC Motor Absorption 3,4 A 3,7 A Absorbed power 550 W 1000 W Speed maneuver 10,5 m/min 10,5 m/min Duty cycle 40 % 58 % Max. thrust 1890 N 1890 N Operating temperature -20 C +55 C -20 C +55 C Motor thermal protection 160 C 150 C Degree of protection IP 44 IP 44 Max. gate leaf weight 2000 kg 2000 kg Pinion module Module 4 Module 4 Protected control board: The electronic control unit is well protected from the outside within its plastic shell Practical: The manual release is easy, intuitive and protected by a personal key. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 20

110 VOLT AVAILABLE Accessories 550CPM Counterplate 650ESE02 External emergency release device (flush-mounted) with tamper-proof housing and 4 m cable 325 550CPMR Adjustable counterplate S-500D705M00 Replacement electronic control unit (MASTER20QR) 93 900KITCF15 Safety edge kit l=1,5 m. 600D703M 230/400 V electronic control unit for one gate operator with electrical brake (MASTER20T) 180,3 221,3 360 900KITCF Safety edge kit l=2 m. 400CFZ12 Steel rack 30x12, complete with screws (Module 4, max 2000 kg) 900TWM Wireless safety edge master receiver 400CFZ22 Steel rack 22x22 (Module 4, max 3000 kg) 900TWC Wireless safety edge transmitter 400VSF20 Screws and brackets for 400CFZ22 (40 units per pkg) 250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. C-TARG Aluminium CE mark label, self adhesive C-CRT Warning signal Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 21

400 VOLT GATE OPERATOR BIG 18QI For gates up to 2500 Kg 500BIG18QI 400 V three-phase sliding gate operator complete with electronic control unit. Maximum gate weight 2500 kg. STAINLESS STEEL housing. See page 25 for accessories Features: commercial use for gates up to 2500 kg 400 V three-phase gate operator STAINLESS STEEL housing manual release mechanism adjustable mechanical clutch Pros: suitable for large sliding gates high torque and power thanks to the three-phase technology self-ventilated operator to increase the working cycle metal and bronze gears to increase endurance and reduce noise Technical features Power supply Motor power supply Absorption Absorbed power Speed maneuver BIG18QI 400 V AC (50-60 Hz) 400 V AC 3 A 1000 W 10 m/min Duty cycle 55 % Max. thrust 1850 N Operating temperature -20 C +55 C Motor thermal protection 150 C Degree of protection IP 44 Max. gate leaf weight 2500 kg Pinion module Module 4 420 99 262 312 312 The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 22

O P E R AT O R BIG 30Q 400 VOLT For gates up to 3000 Kg 500BIG30Q 400 V three-phase sliding gate operator complete with electronic control unit. Maximum gate weight 3000 kg. See page 25 for accessories Technical features Power supply Motor power supply Absorption Absorbed power Speed maneuver Work cycle Max. thrust Operating temperature Motor thermal protection IP protection level Max. gate leaf weight Pinion module Features: commercial use for gates up to 3000 kg 400 V three-phase gate operator oil bath vertical pinion operator painted steel housing manual release mechanism mechanical clutch for crush prevention BIG30Q 400 V AC (50-60 Hz) 400 V AC 3,6 A 1500 W 12,5 m/min 50 % 3500 N -20 C +55 C 150 C IP 44 3000 kg Module 4 Pros: suitable for large sliding gates high torque and power thanks to the three-phase technology self-ventilated operator to increase the working cycle metal and bronze gears to increase endurance and reduce noise 573 179 300 352,5 The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards. 23 370

400 VOLT GATE OPERATOR BIG 40Q For gates up to 4000 Kg 500BIG40Q 400 V three-phase sliding gate operator for intensive use complete with electronic control unit and soft-start. Maximum gate weight 4000 kg. Features: commercial use for gates up to 4000 kg 400 V three-phase gate operator oil bath vertical pinion operator soft start acceleration ramp and soft stop manual release mechanism Module 6 rack pinion version available upon request mechanical clutch for crush prevention Technical features Power supply Motor power supply Absorption Absorbed power Max. operating speed Duty cycle Max. thrust Operating temperature Motor thermal protection Degree of protection Max. gate leaf weight Pinion module Pros: suitable for huge sliding gates high torque and power thanks to the three-phase technology self-ventilated operator to increase the working cycle metal and bronze gears to increase endurance and reduce noise intensive use (50% working cycle) BIG40Q 400 V AC (50-60 Hz) 400 V AC 3,6 A 1500 W 12,5 m/min 50 % 3500 N -20 C +55 C 150 C IP 44 4000 kg Module 4 616 179 370 422 440 The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 1244512453 standards. 24

Accessories for BIG series of Sliding Gate Operators 400CP12 BIG18QI counterplate S-600D703M00 230/400 V replacement electronic control unit for one gate operator with electrical brake 400CP30 BIG30Q counterplate 400CFZ22 Steel rack 22x22 (Module 4, max 3000 kg) 400CP40 BIG40Q counterplate 400VSF20 Screws and brackets for 400CFZ22 (40 units per pkg) 900KITCF Safety edge kit 2 m. 550CFZ06 Steel rack 30x30 (Module 6, max 4000 kg) 900TWC Wireless safety edge transmitter C-TARG Aluminium CE mark label, self adhesive 900TWM Wireless safety edge master receiver 750COL Control unit mounting post C-CRT Warning signal 250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 25

SWING GATES Arm2000 Arm200 R18 R40/30 Easy Zip MADE IN ITALY

12 VOLT GATE OPERATOR ARM For gate leaves up to 3 m 2000ENC 650ARM2000ENC DC electromechanical covered screw gate operator with encoder. Maximum gate leaf 3 m Features: residential use for gates leaves up to 3 m low voltage DC gate operator optical encoder technology covered screw gate operator adjustable mounting brackets Pros: obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery fast operating speed soft start and soft stop intensive use, ideal for use on apartment buildings and public entrances bronze lead nut for strength and silent operation electrical connections are easier thanks to the larger upper space quick and easy installation Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 ARM2000ENC 230 V AC (50-60 Hz) 18 V DC 1,3 A 24 W 12 sec. Duty cycle 100 % Max. thrust 2600 N Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 44 Easy mounting Multi-position adjustable brackets allow greater flexibility during assembly even on non standard sized posts Manual release with personal key Easy-to-operate manual release with key lock for the less skilled users The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 28

KARM2000BA Complete double arm automation kit for gates up to 3 + 3 m, with two 650ARM2000ENC gate operators 122,5 Accessories included in the kit: 99 907,3 900OPTIC 750D749MA 300T-KEY aluminium + LED TSL 250ANTD 900LAMP4 250K-SLIMRP BRACKETS C-CRT Accessories Limit to use* 200BATT 12 Volt Battery, 7,2 Ah 700BAP Gate stopper for heavy leaves 800 600 750D749MA Electronic control unit for one or two DC gate operators with encoder, complete with 433,92 Mhz rolling code radio receiver, battery charger, transformer and enclosure 700BAP1 Gate stopper for light leaves Weight of leaf (Kg) 500 400 320 1 1,5 2 2,5 3 Width of leaf (m) M-030000CC50 Multicore cable (2 x 2.5 sq.mm + 3 x 0.5 sq.mm) 700BAP2 Gate stopper wall/floor mount *They refer to leaves with openings and not totally closed panels. 700GS5 Weatherproof cable connector for 5-core 12 V cable C-TARG Aluminium CE Mark Label, self adhesive 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) Use only M-030000CC50 cable or equivalent See page 128 for assembly measurements and opening angle Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 29

230 VOLT GATE OPERATOR ARM For gate leaves up to 3 m 2000/F/FC 650ARM2000 230 V electromechanical covered screw gate operator. Maximum gate leaf 3 m 650ARM2000F 230 V electromechanical covered screw gate operator with opening limit switch. Maximum gate leaf 3 m 650ARM2000FC 230 V electromechanical covered screw gate operator with opening and closing limit switches. Maximum gate leaf 3 m Features: residential use for gates leaves up to 3 m 230 V gate operator built-in capacitor available with or without electro-mechanical limit switches covered screw gate operator adjustable mounting brackets Pros: bronze lead nut for strength and silent operation electrical connections are easier thanks to the larger upper space quick and easy installation manual release with key lock high torque and power Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 ARM2000/F/FC 230 V AC (50-60 Hz) 230 V AC 1,5 A 280 W 20 sec. Duty cycle 36 % Max. thrust 2300 N Operating temperature -20 C +55 C Motor thermal protection 160 C Degree of protection IP 44 Easy mounting Quick and easy installation thanks to the multi-position adjustable mounting brackets supplied with each gate operator. Adjustable limit switches Electro-mechanical limit switches allow gate position adjustment even when gate stoppers are not used The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 30

110 VOLT AVAILABLE KARM2000T Complete double arm automation kit for gates up to 3 + 3 m, with two 650ARM2000 gate operators 122,5 Accessories included in the kit: 99 907,3 900OPTIC 750D760M 300T-KEY aluminium + LED TSL 250ANTD 900LAMP3 250K-SLIMRP BRACKETS C-CRT Accessories Limit to use* 750D760M Electronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz rolling code radio receiver, complete with enclosure 750CUP Control unit enclosure protective lid 700BAP Gate stopper for heavy leaves 700BAP1 Gate stopper for light leaves Weight of leaf (Kg) 800 600 500 400 320 1 1,5 2 2,5 3 Width of leaf (m) 700GS3 Weatherproof cable connector for 3-core 230 V cable 700BAP2 Gate stopper wall/floor mount *They refer to leaves with openings and not totally closed panels. 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) C-TARG Aluminium CE Mark Label, self adhesive Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 See page 128 for assembly measurements and opening angle 31

12 VOLT GATE OPERATOR ARM For gate leaves up to 5 m BENC 650ARM225BENC DC electromechanical linear gate operator with encoder. Maximum gate leaf 3 m 650ARM250BENC DC electromechanical linear gate operator with encoder. Maximum gate leaf 4 m 650ARM270BENC DC electromechanical linear gate operator with encoder. Maximum gate leaf 5 m Features: residential / apartment building / commercial use for gates leaves up to 5 m low voltage DC gate operator optical encoder technology rod extension gate operator adjustable mounting brackets Pros: obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery fast operating speed soft start and soft stop intensive use, ideal for use on apartment buildings and public entrances electrical connections are easier thanks to the larger upper space quick and easy installation suitable for large gates and non standard sized posts Technical features Power supply ARM225BENC ARM250BENC ARM270BENC 230 V AC (50-60 Hz) 230 V AC (50-60 Hz) 230 V AC (50-60 Hz) Motor power supply 18 V DC 18 V DC 18 V DC Absorption 1,3 A 1,3 A 1,3 A Absorbed power 24 W 24 W 24 W Opening time 90 12 sec. 12,5 sec. 13 sec. Duty cycle 100 % 100 % 100 % Max. thrust 2600 N 2600 N 2600 N Operating temperature -20 C +55 C -20 C +55 C -20 C +55 C Motor thermal protection - - - Degree of protection IP 44 IP 44 IP 44 Easy mounting Multi-position adjustable brackets allow greater flexibility during assembly even on non standard sized posts Manual release with personal key Easy-to-operate manual release with key lock for the less skilled users The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 32

KARM225BA Complete double arm automation kit for gates up to 3 + 3 m, with two 650ARM225B gate operators 122,5 KARM250BA Complete double arm automation kit for gates up to 4 + 4 m, with two 650ARM250B gate operators KARM270BA Complete double arm automation kit for gates up to 5 + 5 m, with two 650ARM270B gate operators 99 A Accessories included in the kit: A ARM225BENC 811 ARM250BENC 951 ARM270BENC 1056 900OPTIC 750D749MA 300T-KEY aluminium + LED TSL 250ANTD 900LAMP4 800 Limit to use* 600 500 250K-SLIMRP BRACKETS 750D749MA Electronic control unit for one or two DC gate operators with encoder, complete with 433,92 Mhz rolling code radio receiver, battery charger, transformer and enclosure 200BATT 12 Volt Battery, 7,2 Ah C-CRT Accessories 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) 700BAP Gate stopper for heavy leaves Weight of leaf (Kg) 400 320 260 220 1,5 2 2,5 3 3,5 4 4,5 5 Width of leaf (m) ARM225BENC ARM250BENC ARM270BENC *They refer to leaves with openings and not totally closed panels. M-030000CC50 Multicore cable (2 x 2.5 sq.mm + 3 x 0.5 sq.mm) C-TARG Aluminium CE Mark Label, self adhesive 700GS5 Weatherproof cable connector for 5-core 12 V cable Use only M-030000CC50 cable or equivalent See page 128 for assembly measurements and opening angle Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 33

230 VOLT GATE OPERATOR ARM For gate leaves up to 5 m 225/250/270 650ARM225 230 V electromechanical linear gate operator. Maximum gate leaf 3 m 650ARM250 230 V electromechanical linear gate operator. Maximum gate leaf 4 m 650ARM270 230 V electromechanical linear gate operator. Maximum gate leaf 5 m Features: residential / commercial use for gates leaves up to 5 m 230 V gate operator built-in capacitor rod extension gate operator adjustable mounting brackets Pros: electrical connections are easier thanks to the larger upper space quick and easy installation manual release with key lock high torque and power suitable for large gates and non standard sized posts Technical features Power supply ARM225 ARM250 ARM270 230 V AC (50-60 Hz) 230 V AC (50-60 Hz) 230 V AC (50-60 Hz) Motor power supply 230 V AC 230 V AC 230 V AC Absorption 1,5 A 1,5 A 1,5 A Absorbed power 280 W 280 W 280 W Opening time 90 20 sec. 20,5 sec. 21 sec. Duty cycle 36 % 36 % 36 % Max. thrust 2300 N 2300 N 2300 N Operating temperature -20 C +55 C -20 C +55 C -20 C +55 C Motor thermal protection 160 C 160 C 160 C Degree of protection IP 44 IP 44 IP 44 Easy mounting Multi-position adjustable brackets allow greater flexibility during assembly even on non standard sized posts Exclusive design The new shapes adapt to any type of gate and have been designed to simplify installation and maintenance The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 34

110 VOLT AVAILABLE KARM225T Complete double arm automation kit for gates up to 3 + 3 m, with two 650ARM225 gate operators 122,5 KARM250T Complete double arm automation kit for gates up to 4 + 4 m, with two 650ARM250 gate operators KARM270T Complete double arm automation kit for gates up to 5 + 5 m, with two 650ARM270 gate operators 99 A Accessories included in the kit: A ARM225 811 ARM250 951 ARM270 1056 900OPTIC 750D760M 300T-KEY aluminium + LED TSL 250ANTD 900LAMP3 800 600 Limit to use* 500 250K-SLIMRP BRACKETS C-CRT Accessories Weight of leaf (Kg) 400 320 260 220 1,5 2 2,5 3 3,5 4 4,5 5 ARM225 ARM250 ARM270 750D760M Electronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz rolling code radio receiver, complete with enclosure 700BAP Gate stopper for heavy leaves Width of leaf (m) *They refer to leaves with openings and not totally closed panels. 750CUP Control unit enclosure protective lid 700BAP1 Gate stopper for light leaves 700GS3 Weatherproof cable connector for 3-core 230 V cable 700BAP2 Gate stopper wall/floor mount 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) C-TARG Aluminium CE Mark Label, self adhesive Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 See page 128 for assembly measurements and opening angle 35

12 VOLT GATE OPERATOR R18 BENC For gate leaves up to 1,8 m 650R18BENC DC electromechanical gate operator with encoder. Maximum gate leaf 1,8 m (foundation box to be ordered separately) 650R18BENCVEL DC fast electromechanical gate operator with encoder. Maximum gate leaf 1,2 m / 200 kg (foundation box to be ordered separately) Features: residential use for gates leaves up to 1,8 m low voltage DC gate operator optical encoder technology electromechanical motor Pros: compact size virtually invisible, does not affect the design of the gate opening up to 360 with no additional accessories obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery fast operating speed intensive use, ideal for use on apartment buildings and public entrances Technical features R18BENC R18BENCVEL Power supply 230 V AC (50-60 Hz) 230 V AC (50-60 Hz) Motor power supply 18 V DC 18 V DC Absorption 0,7 A 0,8 A Absorbed power 14 W 15 W Opening time 90 13 sec. 9 sec. Duty cycle 100 % 100 % Max. torque 192 Nm 180 Nm Operating temperature -20 C +55 C -20 C +55 C Motor thermal protection - - Degree of protection IP 67 IP 67 Watertight The new watertight collar diverts rain water ensuring a complete and lasting protection. Opening up to 360 The compact R18 gate operator is ideal where space is an issue The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 36

INSIDEKIT04A Complete underground automation kit for gates up to 1,8 + 1,8 m, with two 650R18BENC gate operators 130 417 Accessories included in the kit (foundation boxes to be ordered separately): 161 900OPTIC 750D749MA 300T-KEY aluminium + LED TSL 250ANTD 900LAMP4 250K-SLIMRP C-CRT Accessories 400 Limit to use* 700CFR18CT Cataphoresis steel foundation box with release system 200BATT 12 Volt Battery, 7,2 Ah 700CFR18X Stainless steel foundation box with release system 700GS5 Weatherproof cable connector for 5-core 12 V cable Weight of leaf (Kg) 200 150 0,6 1,2 1,8 Width of leaf (m) R18BENCVEL R18BENC 700BRC18 R18 Retrofit adapter arm 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) *They refer to leaves with openings and not totally closed panels. 750D749MA Electronic control unit for one or two DC gate operators with encoder, complete with 433,92 Mhz rolling code radio receiver, battery charger, transformer and enclosure M-030000CC50 Multicore cable (2 x 2.5 sq.mm + 3 x 0.5 sq.mm) Use only M-030000CC50 cable or equivalent C-TARG Aluminium CE Mark Label, self adhesive Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 37

230 VOLT GATE OPERATOR R18 For gate leaves up to 1,8 m 650R18 230 V electromechanical gate operator. Maximum gate leaf 1,8 m (foundation box to be ordered separately) Features: residential use for gates leaves up to 1,8 m 230 V gate operator electromechanical motor Pros: compact size virtually invisible, does not affect the design of the gate opening up to 360 with no additional accessories manual release high torque and power Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 R18 230 V AC (50-60 Hz) 230 V AC 1,3 A 240 W 22 sec. Duty cycle 32 % Max. torque 148 Nm Operating temperature -20 C +55 C Motor thermal protection 160 C Degree of protection IP 67 Watertight The new watertight collar diverts rain water ensuring a complete and lasting protection. Opening up to 360 The compact R18 gate operator is ideal where space is an issue The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 38

INSIDEKIT05T Complete underground automation kit for gates up to 1,8 + 1,8 m, with two 650R18 gate operators 130 417 Accessories included in the kit (foundation boxes to be ordered separately): 900OPTIC 750D760M 300T-KEY aluminium + LED TSL 250ANTD 900LAMP3 161 250K-SLIMRP C-CRT Accessories 400 Limit to use* 700CFR18CT Cataphoresis steel foundation box with release system 700GS3 Weatherproof cable connector for 3-core 230 V cable 700CFR18X Stainless steel foundation box with release system 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) Weight of leaf (Kg) 200 150 R18 0,6 1,2 1,8 Width of leaf (m) 700BRC18 R18 Retrofit adapter arm 700BAP Gate stopper for heavy leaves *They refer to leaves with openings and not totally closed panels. 750D760M Electronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz rolling code radio receiver, complete with enclosure 700BAP1 Gate stopper for light leaves 750CUP Control unit enclosure protective lid 700BAP2 Gate stopper wall/floor mount Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 39

12 VOLT GATE OPERATOR R40 For gate leaves up to 3,5 m 650R40 DC electromechanical gate operator with encoder. Maximum gate leaf 3,5 m / 400 kg (foundation box to be ordered separately) Features: residential / apartment building use for gates leaves up to 3,5 m low voltage DC gate operator optical encoder technology electromechanical motor protection degree IP67 Pros: virtually invisible, does not affect the design of the gate opening up to 180 thanks to the optional 700KIT180 kit obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even in case of a power cut thanks to the optional battery pack works even during power outage thanks to the optional backup battery intensive use, ideal for use on apartment buildings and public entrances watertight for reliable operation Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 R40 230 V AC (50-60 Hz) 18 V DC 1,5 A 28 W 18 sec. Duty cycle 100 % Max. torque 458 Nm Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 67 Watertight Water proof design ensuring a complete and lasting proteaction. Stainless Steel Box The stainless steel foundation box ensures the highest resistance from corrosion. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 40

320 164 700CFR40C Hot-dip galvanized foundation box with release system 700CFR40X Stainless steel foundation box with release system Accessories 750D749MA Electronic control unit for one or two DC gate operators with encoder, complete with 433,92 Mhz rolling code radio receiver, battery charger, transformer and enclosure 200BATT 12 Volt Battery, 7,2 Ah 800 Limit to use* 415 600 700CFR40CT Cataphoresis steel foundation box with release system 700GS5 Weatherproof cable connector for 5-core 12 V cable Weight of leaf (Kg) 500 400 2 2,5 3 3,5 S-700CFR4060 Stainless steel cover lid for foundation box 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) Width of leaf (m) *They refer to leaves with openings and not totally closed panels. 700KIT180 180 opening kit C-TARG Aluminium CE Mark Label, self adhesive 700KITBFR Adjustable mechanical stop lever M-030000CC50 Multicore cable (2 x 2.5 sq.mm + 3 x 0.5 sq.mm) Use only M-030000CC50 cable or equivalent Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 41

230 VOLT GATE OPERATOR R30 For gate leaves up to 3,5 m 650R30 230 V electromechanical gate operator. Maximum gate leaf 3,5 m / 400 kg (foundation box to be ordered separately) Features: residential use for gates leaves up to 3,5 m 230 V gate operator electromechanical motor protection degree IP67 Pros: virtually invisible, does not affect the design of the gate opening up to 180 thanks to the optional 700KIT180 kit watertight for reliable operation manual release high torque and power suitable for large gates and non standard sized posts Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 R30 230 V AC (50-60 Hz) 230 V AC 1,4 A 260 W 16,5 sec. Duty cycle 33 % Max. torque 402 Nm Operating temperature -20 C +55 C Motor thermal protection 160 C Degree of protection IP 67 Watertight Water proof design ensuring a complete and lasting proteaction. Stainless Steel Box The stainless steel foundation box ensures the highest resistance from corrosion. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 42

320 164 Accessories 415 700CFR40C Hot-dip galvanized foundation box with release system 750CUP Control unit enclosure protective lid 700CFR40X Stainless steel foundation box with release system 700GS3 Weatherproof cable connector for 3-core 230 V cable 800 Limit to use* 600 700CFR40CT Cataphoresis steel foundation box with release system 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) Weight of leaf (Kg) 500 400 2 2,5 3 3,5 S-700CFR4060 Stainless steel cover lid for foundation box 700BAP Gate stopper for heavy leaves Width of leaf (m) *They refer to leaves with openings and not totally closed panels. 700KIT180 180 opening kit 700BAP2 Gate stopper wall/floor mount 700KITBFR Adjustable mechanical stop lever C-TARG Aluminium CE Mark Label, self adhesive 750D760M Electronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz rolling code radio receiver, complete with enclosure Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 43

12 VOLT GATE OPERATOR EASY 12 For gate leaves up to 2,3 m 650EASY12 DX DC electromechanical gate operator with encoder. Right Hand operation. Maximum gate leaf 2,3 m 650EASY12 SX DC electromechanical gate operator with encoder. Left Hand operation. Maximum gate leaf 2,3 m 650EASY12QR DX DC electromechanical gate operator with built-in electronic control board and rolling code radio receiver. Right hand operation, conceived for gate leaves up to 2,3m, complete with hinged arm. 650EASY12QR SX DC electromechanical gate operator with built-in electronic control board and rolling code radio receiver. Left hand operation, conceived for gate leaves up to 2,3m, complete with hinged arm. Features: residential use for gates leaves up to 2,3 m low voltage DC gate operator optical encoder technology electromechanical motor Pros: compact size ideal for big posts obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery fast operating speed intensive use, ideal for use on apartment buildings and public entrances external emergency release available (optional, P/N 650ESE) Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 EASY12 230 V AC (50-60 Hz) 18 V DC 0,8 A 15 W 10 sec. Duty cycle 100 % Max. torque 157 Nm Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 44 Manual release Easy-to-operate manual release with key lock for the less skilled users. Optional external emergency release device Protected Control Board The electronic control unit with built-in radio receiver is well protected within its plastic shell. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 44

EASYKIT03C Complete double arm automation kit for gates up to 2,3 + 2,3 m, with one 650EASY12QR and one 650EASY12 gate operators Accessories included in the kit: 241 900OPTIC 300T-KEY 250ANTD 900LAMP4 250K-SLIMRP aluminium + LED TSL 197 205 C-CRT Accessories 300 Limit to use* 650ESE External emergency release device with tamper-proof housing and 5 m cable 200KBE Back-up battery kit 700GS5 Weatherproof cable connector for 5-core 12 V cable 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) Weight of leaf (Kg) 250 215 200 1 1,5 2 2,3 Width of leaf (m) 650BRCE1 Straight arm with driving track 700BAP2 Gate stopper wall/floor mount *They refer to leaves with openings and not totally closed panels. M-030000CC50 Multicore cable (2 x 2.5 sq.mm + 3 x 0.5 sq.mm) C-TARG Aluminium CE Mark Label, self adhesive BRCE1 Use only M-030000CC50 cable or equivalent Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 45

230 VOLT GATE OPERATOR EASY QR For gate leaves up to 2,3 m 650EASY DX 230 V electromechanical gate operator. Right Hand operation. Maximum gate leaf 2,3 m 650EASY SX 230 V electromechanical gate operator. Left Hand operation. Maximum gate leaf 2,3 m 650EASYQR DX 230 V electromechanical gate operator complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Right Hand operation. Maximum gate leaf 2,3 m 650EASYQR SX 230 V electromechanical gate operator complete with electronic control unit and built-in 433,92 MHz rolling code radio receiver. Left Hand operation. Maximum gate leaf 2,3 m Features: residential use for gates leaves up to 2,3 m 230 V gate operator electronic control unit with built-in 433,92 MHz radio receiver (EASYQR) Pros: compact size easy and intuitive installation ideal for big posts external emergency release available (optional, P/N 650ESE) Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 EASYQR EASY 230 V AC (50-60 Hz) 230 V AC 1,5 A 275 W 16 sec. Duty cycle 32 % Max. torque 160 Nm Operating temperature -20 C +55 C Motor thermal protection 150 C Degree of protection IP 44 Manual release Easy-to-operate manual release with key lock for the less skilled users. Optional external emergency release device Protected Control Board The electronic control unit with built-in radio receiver - is well protected within its plastic shell The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 46

EASYKIT02T Complete double arm automation kit for gates up to 2,3 + 2,3 m, with one 650EASYQR and one 650EASY gate operators 241 Accessories included in the kit: 900OPTIC 300T-KEY 250ANTD 900LAMP3 250K-SLIMRP C-CRT aluminium + LED TSL 197 205 Accessories 300 Limit to use* 650ESE External emergency release device with tamper-proof housing and 5 m cable 700GS3 Weatherproof cable connector for 3-core 230 V cable 700BAP Gate stopper for heavy leaves 700BAP1 Gate stopper for light leaves Weight of leaf (Kg) 250 215 200 1 1,5 2 2,3 Width of leaf (m) 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) 700BAP2 Gate stopper wall/floor mount *They refer to leaves with openings and not totally closed panels. 650BRCE1 Straight arm with driving track C-TARG Aluminium CE Mark Label, self adhesive BRCE1 S-650D727M00 Electronic control unit (replacement board) Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 47

12 VOLT GATE OPERATOR ZIP 12 For gate leaves up to 3,5 m 650ZIP12 DC electromechanical gate operator. Maximum gate leaf 3,5 m Features: residential / apartment building use for gates leaves up to 3,5 m low voltage DC gate operator optical encoder technology electromechanical motor built-in limit switch Pros: ideal for big posts obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery fast operating speed intensive use, ideal for use on apartment buildings and public entrances Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 ZIP12 230 V AC (50-60 Hz) 18 V DC 0,8 A 15 W 8 sec. Duty cycle 100 % Max. torque 416 Nm Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 44 The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 48

125 433 140 Accessories 750D749MA Electronic control unit for one or two DC gate operators with encoder, complete with 433,92 Mhz rolling code radio receiver, battery charger, transformer and enclosure 700BAP Gate stopper for heavy leaves 300 Limit to use* 200BATT 12 Volt Battery, 7,2 Ah 700BAP1 Gate stopper for light leaves 250 M-030000CC50 Multicore cable (2 x 2.5 sq.mm + 3 x 0.5 sq.mm) 700BAP2 Gate stopper wall/floor mount Weight of leaf (Kg) 215 200 2 2,5 3 3,5 Width of leaf (m) 700GS5 Weatherproof cable connector for 5-core 12 V cable C-TARG Aluminium CE Mark Label, self adhesive *They refer to leaves with openings and not totally closed panels. 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) Use only M-030000CC50 cable or equivalent Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 49

230 VOLT GATE OPERATOR ZIP For gate leaves up to 3,5 m 650ZIP 230 V electromechanical gate operator. Maximum gate leaf 3,5 m Features: residential use for gates leaves up to 2,3 m 230 V gate operator electromechanical motor Pros: easy and intuitive installation ideal for big posts high torque and power Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 ZIP 230 V AC (50-60 Hz) 230 V AC 1 A 190 W 13 sec. Duty cycle 50 % Max. torque 334 Nm Operating temperature -20 C +55 C Motor thermal protection 150 C Degree of protection IP 44 The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 50

125 433 140 Accessories 300 Limit to use* 750D760M Electronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz rolling code radio receiver, complete with enclosure 700BAP Gate stopper for heavy leaves Weight of leaf (Kg) 250 215 200 2 2,5 3 3,5 750CUP Control unit enclosure protective lid 700BAP1 Gate stopper for light leaves Width of leaf (m) *They refer to leaves with openings and not totally closed panels. 700GS3 Weatherproof cable connector for 3-core 230 V cable 700BAP2 Gate stopper wall/floor mount 650ESV1-2 Electric lock (1 = left hand opening 2 = right hand opening) C-TARG Aluminium CE Mark Label, self adhesive Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 51

GARAGE DOORS T-Sky Spin MADE IN ITALY

24 VOLT GARAGE OPERATOR T-SKY Torque 650 N Features: residential use for sectional and up-and-over garage doors torque 650 N low voltage DC garage door opener optical encoder technology electronic control unit with built-in radio receiver built-in battery charger manual release mechanism courtesy light with time delay Pros: obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery intensive use motor head turns 90 left/right for installation in shorter garages pre-programmed electronic control unit exclusive push & flip opening system Technical features T-SKYKITC T-SKYKITB Drive system chain belt Power supply 230 V AC (50-60 Hz) Motor power supply 24 V DC Motor Absorption 2,2 A Absorbed power 80 W Max. operating speed 0,185 m/s Duty cycle 100 % Max. torque 10 Nm Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 40 Traction Power 650 N Battery Pack T-SKY garage door opener will work even when the power goes out thanks to the optional backup battery. Push and Flip The electronic control unit is easily accessible thanks to the exclusive push & flip opening system. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 54

T-SKYKITB DC garage door opener complete with one-piece 3 m belt drive rail and one 250T-4RP transmitter 270 T-SKYKITB3 DC garage door opener complete with three-piece (3 x 1 m) belt drive rail and one 250T-4RP transmitter 148 427 T-SKYKITC DC garage door opener complete with one-piece 3 m chain drive rail and one 250T-4RP transmitter T-SKYKITC3 DC garage door opener complete with three-piece (3 x 1 m) chain drive rail and one 250T-4RP transmitter Accessories included in the kit: Belt or chain drive rail 250T-4RP Transmitter Accessories 750BATTSKY Back-up battery kit, 1,2 Ah 900LAMP5 24 V flashing light 150SE External emergency release 900OPTIC Set of safety photocells 100BANT Adapter for up-and-over garage doors 100PROC 1 m extension chain drive rail 100BINSUPP Set of additional fixing brackets 100PROB 1 m extension belt drive rail 150SETSKY External emergency release for sectional door Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 55

GARAGE OPERATOR 24 T-SKY VOLT 1 Torque 1000 N Features: residential use for sectional and up-and-over garage doors torque 1000 N low voltage DC garage door opener optical encoder technology electronic control unit with built-in radio receiver built-in battery charger manual release mechanism courtesy light with time delay Pros: higher torque ideal for large garage doors intensive use motor head turns 90 left/right for installation in shorter garages pre-programmed electronic control unit exclusive push & flip opening system Technical features T-SKYKIT1C T-SKYKIT1B Drive system chain belt Power supply 230 V AC (50-60 Hz) Motor power supply 24 V DC Motor Absorption 2,5 A Absorbed power 110 W Speed maneuver 0,185 m/s Duty cycle 100 % Max. torque 12 Nm Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 40 Traction Power 1000 N For installation in limited spaces, T-SKY head unit can be rotated 90 degrees clockwise or counterclockwise. The new, user-friendly manual release mechanism allows to hook the garage door at any position The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 56

T-SKYKIT1B DC garage door opener complete with one-piece 3 m belt drive rail and one 250T-4RP transmitter 270 T-SKYKIT1B3 DC garage door opener complete with three-piece (3 x 1 m) belt drive rail and one 250T-4RP transmitter 148 427 T-SKYKIT1C DC garage door opener complete with one-piece 3 m chain drive rail and one 250T-4RP transmitter T-SKYKIT1C3 DC garage door opener complete with three-piece (3 x 1 m) chain drive rail and one 250T-4RP transmitter Accessories included in the kit: Belt or chain drive rail 250T-4RP Transmitter Accessories 750BATTSKY Back-up battery kit, 1,2 Ah 900LAMP5 24 V flashing light 150SE External emergency release 900OPTIC Set of safety photocells 100BANT Adapter for up-and-over garage doors 100PROC 1 m extension chain drive rail 100BINSUPP Set of additional fixing brackets 100PROB 1 m extension belt drive rail 150SETSKY External emergency release for sectional door Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 57

12 VOLT GARAGE OPERATOR SPIN 12 For up-and-over garage doors 100SPIN12QR DC garage door opener with encoder, complete with built-in electronic control unit and 433,92 MHz two-channel radio receiver 100SPIN12 DC garage door opener with encoder Features: residential / apartment building use low voltage DC motor optical encoder technology electronic control unit with built-in radio receiver manual release mechanism courtesy light with time delay built-in open / close buttons (SPIN12QR) Pros: obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery fast operating speed intensive use soft stop irreversible gate operator small and compact to grant the widest opening of the garage door Technical features Power supply Motor power supply Motor Absorption Absorbed power Opening time 90 SPIN12 SPIN12QR 230 V AC (50-60 Hz) 18 V DC 2 A 250 W 11 sec. Duty cycle 100 % Max. torque 295 Nm Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 40 Max. door surface 10 m² The door opener with built-in electronic control unit features two pushbuttons to open / close the door from the inside, as well as an efficient courtesy light with time delay. Quick and easy installation thanks to the built-in electronic control unit (no visible wires). The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 58

Accessories 150KITB1SP Central mount (single opener) installation kit (no welding required) 150KITB1S Central mount (single opener) installation kit (1 x L16S, 2 x BD, 2 x T1) 150KITB1D1S Side mount (twin openers) installation kit (2 x L16S, 2 x BDL1) 150SESP External emergency release device with cable. 150SESPIN External emergency key release device 150KITBCL1 2 x side mount (twin openers) telescopic curved arms with brackets 150BOCC1 Groove bushing, Ø 42 x 50 mm 150KITCPB Set of 6 counterweights (1,7 kg each) 200K996M Electronic control unit for one or two DC up-and-over garage door openers with soft-stop, built-in 433,92 MHz radio receiver and enclosure 200BATT 12 V back-up battery, 7,2 Ah 600 90 107,6 100 SMALL AND COMPACT 150KITBDL1 2 x side mount (twin openers) telescopic arms with brackets 750SCB12C Battery charger (optional) 150KITBD 2 x central mount (single opener) telescopic arms with brackets M-030Z15G000 Pedestrian door microswitch 150T1 1500 mm long 1 pipe with bushing 900KICM120 Safety edge l=1,2 m 150T2 2000 mm long 1 pipe with bushing 900KICM180 Safety edge l=1,8 m 150L16S Support, 1600 mm 150L25S Support, 2500 mm 150KITBC 2 x central mount (single opener) telescopic curved arms with brackets 900KONT120 Controlled safety edge l=1,2 m (8,2 kω) 900KONT180 Controlled safety edge l=1,8 m (8,2 kω) C-TARG Aluminium CE Mark Label, self adhesive Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 59

230 VOLT GARAGE OPERATOR SPIN For up-and-over garage doors QRE/F 100SPINQRE 230 V garage door opener with limit switch and encoder complete with built-in electronic control unit and 433,92 MHz two-channel radio receiver 100SPINF 230 V garage door opener with limit switch Features: residential use 230 V motor built-in limit switch electronic control unit with built-in radio receiver manual release mechanism courtesy light with time delay built-in open / close buttons (SPINQRF) Pros: semi-intensive use higher torque and power encoder for obstacle detection and crush prevention irreversible gate operator small and compact to grant the widest opening of the garage door Technical features Power supply Motor power supply Absorption Absorbed power Opening time 90 SPINF SPINQRE 230 V AC (50-60 Hz) 230 V AC 2 A 370 W 21 sec. Duty cycle 30 % Max. torque 490 Nm Operating temperature -20 C +55 C Motor thermal protection 150 C Degree of protection IP 40 Max. door surface 10 m² The door opener with built-in electronic control unit features two pushbuttons to open / close the door from the inside, as well as an efficient courtesy light with time delay. User-friendly manual release. The installation of the external emergency release device is recommended when the main garage door is the only garage exit The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 60

Accessories 150KITB1SP Central mount (single opener) installation kit (no welding required) 150KITB1S Central mount (single opener) installation kit (1 x L16S, 2 x BD, 2 x T1) 150KITB1D1S Side mount (twin openers) installation kit (2 x L16S, 2 x BDL1) 150SESP External emergency release device with cable. 150KITBCL1 2 x side mount (twin openers) telescopic curved arms with brackets 150BOCC1 Groove bushing, Ø 42 x 50 mm 150KITCPB Set of 6 counterweights (1,7 kg each) 200K892M Electronic control unit for one or two 230 V up-and-over garage door openers with soft-stop, built-in 433,92 MHz radio receiver and enclosure 600 90 107,6 100 SMALL AND COMPACT 150SESPIN External emergency key release device M-030Z15G000 Pedestrian door microswitch 150KITBDL1 2 x side mount (twin openers) telescopic arms with brackets 900KICM120 Safety edge l=1,2 m 150KITBD 2 x central mount (single opener) telescopic arms with brackets 150T1 1500 mm long 1 pipe with bushing 900KICM180 Safety edge l=1,8 m 900KONT120 Controlled safety edge l=1,2 m (8,2 kω) 150T2 2000 mm long 1 pipe with bushing 900KONT180 Controlled safety edge l=1,8 m (8,2 kω) 150L16S Support, 1600 mm 150L25S Support, 2500 mm C-TARG Aluminium CE Mark Label, self adhesive Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 150KITBC 2 x central mount (single opener) telescopic curved arms with brackets 61

COMMERCIAL FOLDING B12 / B10 SPEED2CTN F10 / F15 MADE IN ITALY

12 VOLT GATE OPERATOR B12ENC For door leaves up to 1,2 m 650B12ENC Dx/Sx DC electromechanical folding door operator with encoder. Right Hand operation. Maximum leaf 1,2 m (telescopic arm to be ordered separately) Features: commercial use low voltage DC motor telescopic arm operator optical encoder technology irreversible motor courtesy light with time delay Pros: obstacle detection and crush prevention in accordance with EN 12445-12453 standards works even during power outage thanks to the optional backup battery fast operating speed intensive use soft start and soft stop irreversible door operator Technical features Power supply Motor power supply Absorption Absorbed power B12ENC 230 V AC (50-60 Hz) 18 V DC 0,85 A 16 W Duty cycle 100 % Max. torque 395 Nm Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 40 Opening time 90 13 sec. Reduction ratio 1/672 Max. wing widht 1,2 m The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 64

Accessories 150L06 Steel support, 605 mm 750D749MA Electronic control unit for one or two DC gate operators with encoder, complete with 433,92 Mhz rolling code radio receiver, battery charger, transformer and enclosure 460 41 150KITBDLM Set of two telescopic arms with brackets 200BATT 12 V back-up battery, 7,2 Ah 102 89,5 100 550MS Release system C-TARG Aluminium CE Mark Label, self adhesive C-CRT Warning signal 300PPI Heavy duty pushbutton panell Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 65

230 VOLT GATE OPERATOR B1O For door leaves up to 1,2 m 650B1O Dx/Sx 230 V electromechanical folding door operator. Right Hand operation. Maximum leaf 1,2 m (telescopic arm to be ordered separately) Features: commercial use 230 V motor telescopic arm operator irreversible motor courtesy light with time delay Pros: semi-intensive use high torque and power strong telescopic arm Technical features Power supply Motor power supply Absorption Absorbed power B1O 230 V AC (50-60 Hz) 230 V AC 0,76 A 140 W Duty cycle 50 % Max. torque 350 Nm Operating temperature -20 C +55 C Motor thermal protection 150 C Degree of protection IP 40 Opening time 90 14 sec. Reduction ratio 1/672 Max. wing widht 1,2 m The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 66

150L06 Support 605 mm long Accessories 550MS Release mechanism 460 41 150KITBDLM Straight arms side kit 750D760M Electronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz radio receiver, complete with enclosure 102 89,5 100 300PPI Heavy duty pushbutton panel C-TARG Aluminium CE Mark Label, self adhesive C-CRT Warning signal Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 67

12 VOLT GATE OPERATOR SPEED 2CTN For sliding or folding doors up to 400 kg 350SPEED2CTN DC chain drive sliding or folding door operator with encoder, complete with electronic control unit. Maximum door weight 400 kg Features: commercial use irreversible electromechanical door operator for folding or sliding doors up to 400 kg low voltage DC motor counterplate included Pros: intensive use fast operating speed obstacle detection and crush prevention Technical features Power supply Motor power supply Absorption Absorbed power SPEED2CTN 230 V AC (50-60 Hz) 18 V DC 1,5 A 29 W Duty cycle 100 % Max. torque 14 Nm Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 44 Max. speed maneuver 12,8 m/min Max. gate leaf weight 400 kg Chain transmission SPEED2CTN can directly be installed on the door thanks to the chain transmission The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 68

Accessories 550TEN Chain stretcher 550KITCTN Set of chain brackets 310 550CAT5 1/2" x 5/16" chain (5 m) 300PPI Heavy duty pushbutton panel 89,75 188 228 298 C-CRT Warning signal C-TARG Aluminium CE mark label, self adhesive 250RXDC1 Self-learning, singlechannel, 433,92 MHz plugin radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 69

230/400 VOLT GATE OPERATOR F10 For sliding or folding doors up to 1500 kg 500F10CA1 230 V chain drive sliding or folding door operator, complete with limit switch. Maximum door weight 1000 kg 500F10CA 230 V chain drive sliding or folding door operator. Maximum door weight 1000 kg 500F15C1 400 V chain drive sliding or folding door operator, complete with limit switch. Maximum door weight 1500 kg 500F15C 400 V chain drive sliding or folding door operator. Maximum door weight 1500 kg Features: commercial use for folding or sliding doors up to 1500 kg irreversible motor Pros: semi-intensive use high torque and power irreversible door operator ideal for wide hall openings (multi-leaf folding doors) quick and easy installation thanks to the built-in limit switch (F10CA1 / F15CA1) version with separated limit switch (F10CA / F15CA) recommended where a higher precision is required Technical features F10CA/1 F15C/1 Power supply 230 V AC (50-60 Hz) 400 V AC (50-60 Hz) Motor power supply 230 V AC 400 V AC Absorption 3,9 A 3,25 A Absorbed power 720 W 1800 W Duty cycle 50 % 55 % Max. torque 39 Nm 60 Nm Operating temperature -20 C +55 C -20 C +55 C Motor thermal protection 150 C 150 C Degree of protection IP 40 IP 40 Output speed 10,3 m/min 10,3 m/min Max. gate leaf weight <1000 kg <1500 kg Chain transmission SPEED2CTN can directly be installed on the door thanks to the chain transmission The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 70

Accessories 600D703 230/400 V electronic control unit for one gate operator with electrical brake M-03083850LR Limit switch 320 550TEN Chain stretcher 550MS Release system 550CAT5 1/2" x 5/16" chain (5 m) 800B600100 F10/F15 Mounting plate 200 210 300PPI Heavy duty pushbutton panel C-TARG Aluminium CE mark label, self adhesive C-CRT Warning signal 250RXDC1 Self-learning, singlechannel, 433,92 MHz plugin radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 71

AUTOMATIC DOORS BRINK DOOR DOORX BLOW MADE IN ITALY

DOOR OPENER BRINK For doors up to 250 kg 10DOORBRINK Single leaf swing door opener, powered opening, powered closing, wind stop. Max. leaf 130 kg and 1000 mm 10DOORBRINK-S Single leaf swing door opener, powered opening, spring closing, wind stop. Max. leaf 130 kg and 1000 mm 10DOORBRINK-SL Single leaf swing door opener, powered opening, spring closing, wind stop. Max. leaf 100 kg and 1000 mm Features: commercial use max. opening 95 for door panels up to 130 kg and 1000 mm built-in electronic control unit in or out swing single or double swing leaf installation Pros: intensive use ideal for offices, supermarkets, hospitals and public entrances can automate most swing doors, new or existing quick and easy installation react immediately to any obstacle wind stop: resists wind pressure high reliability and smooth operation Technical features BRINK / BRINK-S BRINK-SL Power supply 115/230 V AC (50-60 Hz) 115/230 V AC (50-60 Hz) Motor power supply 24 V DC with encoder 24 V DC withw encoder Absorbed power 120 W 120 W Opening speed 4-12 sec. 4-12 sec. Closing speed 5-15 sec. 5-15 sec. Duty cycle 100 % 100 % Operating temperature -20 C +50 C -20 C +50 C Degree of protection IP 32 IP 32 Max. opening 95 95 Max. gate leaf weight 130 kg 100 kg Compact and reliable operator The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 74

Accessories S-10DOORBST Track (PULL operation) Lenght of door (mm) Max weight (Kg) 700 130 750 124 800 118 850 113 900 108 950 104 1000 100 S-10DOORBSS Scissor arm (PUSH operation) Lenght of door (mm) Max weight (Kg) 800 92 850 89 900 85 950 83 1000 80 S-10DOORSS340 Safety sensor for obstacle detection S-10DOORRAD Active infrared motion detector S-10DOORSELFB Mechanical program switch for BRINK 550 S-10DOORRADMB Microwave radar detector, bidirectional, scanned area 4 m S-10DOORSELFBC Mechanical key switch for BRINK 120 110 S-10DOORRADMU Microwave radar detector, unidirectional, scanned area 4 m S-10DOORPROGB Programming keypad for BRINK S-10DOORKIT2BRK Aluminium cover for two BRINK openers, complete with cable for Master/Slave connection S-10DOORRAD2 Radar for activation and safety 75

DOOR OPENER DOOR For sliding doors up to 100 kg Features: commercial use emergency operation with integrated backup battery pack suitable for single leaf or bi-parting sliding doors max. door panel weight 1 x 100 kg or 2 x 75 kg max. clear passage width 2990 mm built-in electronic control unit Pros: intensive use ideal for offices, supermarkets, hospitals and busy environments obstacle detection and crush prevention large vertical (20 mm) and horizontal (45 mm) leaf adjustment range fast, trouble-free, installation at the job site thanks to the preassembled package Technical features Power supply Motor power supply Absorbed power Opening speed Closing speed DOOR 230 V AC (50-60 Hz) 40 V DC with encoder 80 W max. 70 cm/sec. for wing max. 50 cm/sec. for wing Duty cycle 100 % Operating temperature -20 C +50 C Degree of protection IP 12 Max. gate leaf weight 1 wing: 100 kg 2 wings: 75 kg Long life and quite operation with replaceable noise reduction profile Strong and reliable door automation The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 76

DOORX operators are supplied as a complete package completely assembled in the support beam and cut-to-size. Each package includes aluminium support beam with transmission, side caps, belt, carriage assemblies, operator, electronic control unit and anti-panic battery pack. Single leaf door opener, cut-to-size and assembled: 10DOOR1.20 Single leaf sliding door opener (max 100 kg). Maximum profile length 2000 mm 10DOOR1.30 Single leaf sliding door opener (max 100 kg). Maximum profile length 3000 mm 10DOOR1.40 Single leaf sliding door opener (max 100 kg). Maximum profile length 4000 mm 10DOOR1.60 Single leaf sliding door opener (max 100 kg). Maximum profile length 6000 mm Double leaf door opener, cut-to-size and assembled: 10DOOR2.20 Double leaf sliding door opener (max 75 + 75 kg). Maximum profile length 2000 mm 10DOOR2.30 Double leaf sliding door opener (max 75 + 75 kg). Maximum profile length 3000 mm 10DOOR2.40 Double leaf sliding door opener (max 75 + 75 kg). Maximum profile length 4000 mm 10DOOR2.60 Double leaf sliding door opener (max 75 + 75 kg). Maximum profile length 6000 mm Accessories 135 82 S-10DOORFOTO1 Set of safety photocells S-10DOORBLOC Electromechanical fail secure autolock Zona vuota per apertura carter 13 125 S-10DOORFOTO2 Additional set of safety photocells S-10DOORPROG Programming keypad for DOOR/DOORX 180 26 MIN 41 MAX S-10DOORRAD Active infrared motion detector S-10DOORSELF Mechanical program switch for DOOR/DOORX 18 MIN 49 MAX 80 S-10DOORRADMB Microwave radar detector, bidirectional, scanned area 4 m S-10DOORSELFC Mechanical key switch for DOOR/DOORX S-10DOORRADMU Microwave radar detector, unidirectional, scanned area 4 m S-10DOORCRIS15 Aluminium clamp for frameless glass panels (thickness 10 mm), length 1,5 m S-10DOORRAD2 Radar for activation and safety S-10DOORCRIS1 Aluminium clamp for frameless glass panels (thickness 10 mm), length 1 m 77

DOOR OPENER DOORX For sliding doors up to 150 kg Features: commercial use emergency operation with integrated backup battery pack suitable for single leaf or bi-parting sliding doors max. door panel weight 1 x 150 kg or 2 x 130 kg max. clear passage width 2990 mm built-in electronic control unit Pros: intensive use suitable for heavy door panels ideal for offices, supermarkets, hospitals and busy environments obstacle detection and crush prevention large vertical (20 mm) and horizontal (45 mm) leaf adjustment range fast, trouble-free, installation at the job site thanks to the preassembled package Technical features Power supply Motor power supply Absorbed power Opening speed Closing speed DOORX 230 V AC (50-60 Hz) 40 V DC with encoder 130 W max. 70 cm/sec. for wing max. 50 cm/sec. for wing Duty cycle 100 % Operating temperature -20 C +50 C Degree of protection IP 12 Max. gate leaf weight 1 wing: 150 kg 2 wings: 130 kg Long life and quite operation with replaceable noise reduction profile Strong and reliable door automation The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 78

DOORX operators are supplied as a complete package completely assembled in the support beam and cut-to-size. Each package includes aluminium support beam with transmission, side caps, belt, carriage assemblies, operator, electronic control unit and anti-panic battery pack. Single leaf door opener, cut-to-size and assembled: 10DOORX1.20 Single leaf sliding door opener (max 150 kg). Maximum profile length 2000 mm 10DOORX1.30 Single leaf sliding door opener (max 150 kg). Maximum profile length 3000 mm 10DOORX1.40 Single leaf sliding door opener (max 150 kg). Maximum profile length 4000 mm 10DOORX1.60 Single leaf sliding door opener (max 150 kg). Maximum profile length 6000 mm Double leaf door opener, cut-to-size and assembled: 10DOORX2.20 Double leaf sliding door opener (max 130 + 130 kg). Maximum profile length 2000 mm 10DOORX2.30 Double leaf sliding door opener (max 130 + 130 kg). Maximum profile length 3000 mm 10DOORX2.40 Double leaf sliding door opener (max 130 + 130 kg). Maximum profile length 4000 mm 10DOORX2.60 Double leaf sliding door opener (max 130 + 130 kg). Maximum profile length 6000 mm Accessories 135 82 S-10DOORFOTO1 Set of safety photocells S-10DOORBLOC Electromechanical fail secure autolock Zona vuota per apertura carter 13 125 S-10DOORFOTO2 Additional set of safety photocells S-10DOORPROG Programming keypad for DOOR/DOORX 180 26 MIN S-10DOORRAD Active infrared motion detector S-10DOORSELF Mechanical program switch for DOOR/DOORX 41 MAX 18 MIN 49 MAX 80 S-10DOORRADMB Microwave radar detector, bidirectional, scanned area 4 m S-10DOORSELFC Mechanical key switch for DOOR/DOORX S-10DOORRADMU Microwave radar detector, unidirectional, scanned area 4 m S-10DOORCRIS15 Aluminium clamp for frameless glass panels (thickness 10 mm), length 1,5 m S-10DOORRAD2 Radar for activation and safety S-10DOORCRIS1 Aluminium clamp for frameless glass panels (thickness 10 mm), length 1 m 79

DOOR OPENER DOOR / X Unassembled openers for sliding doors up to 150 kg Features: door opener components supplied as a kit to be completed with structural parts commercial use emergency operation with integrated backup battery pack suitable for single leaf or bi-parting sliding doors Pros: competitive costs increased flexibility eliminates the need to stock complete door packages logistics optimization prompt delivery to the end-user of a customized door package P-10DOORKIT1.1 Single leaf sliding door opener (max 100 kg) P-10DOORKIT2.1 Single leaf sliding door opener (max 150 kg) P-10DOORKIT1.2 Double leaf sliding door opener (max 75 + 75 kg) P-10DOORKIT2.2 Double leaf sliding door opener (max 130 + 130 kg) A) S-10DOORTRA6 6500 mm aluminium support beam A B) S-10DOOROT6 6000 mm aluminium track D C B C) S-10DOORPRP6 6000 mm noise reduction profile D) S-10DOORCOP6 6500 mm aluminium cover S-10DOORCING Traction belt (60 m per pkg) 80

FRAME BREAK-OUT SYSTEM FOR SLIDING DOORS The break-out system is the best solution for escape routes. The system enables sliding and sidelight panels to be swung out in an emergency situation by pushing the door. S-10DOORSF1M Configuration: single sliding with fixed sidelight panels. Frame break-out system composed of 1 x break-out kit, 1 x upper profile 1300 mm, 1 x floor track 1400 mm. Specify right or left-hand (consult TAU for additional information) Additional components (to be purchased separately): S-10DOORFOTO2 Additional set of safety photocells (if a set of DOORFOTO1 is already installed) S-10DOORSTF Metal housing for DOORFOTO2 S-10DOORSF2M Configuration: bi-parting with fixed sidelight panels. Frame break-out system composed of 2 x break-out kits, 2 x upper profiles 1300 mm, 2 x floor tracks 1400 mm Additional components (to be purchased separately): S-10DOORFOTO2 Additional set of safety photocells (if a set of DOORFOTO1 is already installed) S-10DOORSTF Metal housing for DOORFOTO2 S-10DOORSF2MF Configuration: single sliding with break-out sidelight panel. Frame break-out system composed of 1 x break-out kit, 1 x upper profile 1300 mm, 1 x floor track 1400 mm, 1 x ball-lock, 1 x magnetic contact Specify right or left-hand (consult TAU for additional information) Additional components (to be purchased separately): S-10DOORGP Photocell foldaway case S-10DOORGPS Photocell foldaway case S-10DOORSQ2 Lock brackets to prevent opening from the outside (2 brackets per pkg) S-10DOORCRN2 Hinges (2 hinges per pkg) S-10DOORSF4MF Configuration: bi-parting with break-out sidelight panels. Frame break-out system composed of 2 x break-out kits, 2 x upper profiles 1300 mm, 2 x floor tracks 1400 mm, 2 x ball-locks, 2 x magnetic contact Additional components (to be purchased separately): S-10DOORGP2 Photocell foldaway case S-10DOORGPS2 Photocell foldaway case S-10DOORSQ4 Lock brackets to prevent opening from the outside (4 brackets per pkg) S-10DOORCRN4 Hinges (2 hinges per pkg) 81

AUTOMATIC BARRIERS LUXE RBLO PARK T-STOP MADE IN ITALY

12/230 VOLT AUTOMATIC BARRIER RBLO For barrier boom length up to 4 m 800RBLO DC automatic barrier, painted steel cabinet, for booms up to 4 m, complete with built-in electronic control board, radio receiver and battery charger. Boom must be ordered separately. 800RBLO-E 230 V automatic barrier, painted steel cabinet, for booms up to 3 m, complete with built-in electronic control board and radio receiver. Boom must be ordered separately. Features: residential / commercial use for booms up to 4 m opening time 2,2 seconds Pros: intensive use fast opening ideal for busy entrances and car parks possibility to install photocells and flashing lights directly on the barrier cabinet Caratteristiche tecniche RBLO RBLO-E Power supply 230 V AC (50-60 Hz) 230V AC (50-60 Hz) Motor power supply 18 V DC 230V AC Motor Absorption 2,5 A 1,2 A Absorbed power 250 W 180 W Min. opening time 90 2,2 sec. 2,2 sec. Duty cycle 100 % 120/ora Max. torque 155 Nm 160 Nm Operating temperature -20 C +55 C -20 C +55 C Degree of protection IP 54 IP 54 Max width of passage clearance 4 m 3 m Easy-to-operate, intuitive manual release with key lock for the less skilled users The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 84

Accessories 800AFI4 Anodized aluminium round section boom, 4 m, complete with adhesive refractor strips 200BATT 12 V back-up battery, 7,2 Ah 4444 max. 4000 mm 220 1154 1351 800CPRBL Counterplate (RBLO) 300SA1 Magnetic loop detector 338 200 938 320 800AT Boom support 300SCMS1 Magnetic key switch 900TOWERF Photocells mounting post 300SCMS3 Decoder for 300SCMS1 900OPTIC Set of safety photocells 300CMS Magnetic key 900LAMP4 12 V flashing light 800SFA Boom break-out system SPRING A) C) M-06000B3000 (ø 4,2 mm) Color: Light green RAL 6019 M-060B3060FP (ø 6,2 mm) Color: Blue RAL 5003 B) D)* M-0600000028 (ø 5,2 mm) Color: Green RAL 6002 M-060CITY0FP (ø 7 mm) Color: Red RAL 3000 BAR LENGHT BAR AND ACCESSORIES 2 m 2,5 m 3 m 3,5 m 4 m 800AFI4 A A 800AFI4 + 800AT A A B C D The RBLO barrier is supplied as standard with the D spring (M-060CITY0FP), suitable for booms up to 4 m. The RBLO-E barrier is supplied as standard with the B spring (M-0600000028), suitable for booms up to 3 m. For different boom lengths or when further optionals are to be installed please order a different spring as per enclosed chart. Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 85

12 VOLT AUTOMATIC BARRIER RBLO-X For booms up to 4 m 800RBLO-X DC automatic barrier, painted steel cabinet, for elliptical booms up to 4 m, complete with built-in electronic control board, radio receiver and battery charger. Boom and flashing lights must be ordered separately 800RBLO-IX DC automatic barrier, stainless steel cabinet, for elliptical booms up to 4 m, complete with built-in electronic control board, radio receiver and battery charger. Boom and flashing lights must be ordered separately Features: residential / commercial use for booms up to 4 m opening time 2,2 seconds Pros: intensive use fast opening ideal for busy entrances and car parks possibility to install photocells and flashing lights directly on the barrier cabinet Technical features Power supply Motor power supply Motor Absorption Absorbed power Min. opening time 90 RBLO-X - RBLO-IX 230 V AC (50-60 Hz) 18 V DC 2,5 A 250 W 2,2 sec. Duty cycle 100 % Max. torque 155 Nm Operating temperature -20 C +55 C Degree of protection IP 54 Max width of passage clearance 4 m Easy-to-operate, intuitive manual release with key lock for the less skilled users The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 86

Accessories 800AE4 Elliptical white painted aluminium boom, 4 m. Flashing LED lights and rubber bead to be ordered separately 200BATT 12 V back-up battery, 7,2 Ah 4189,5 max. 3750 mm 216 1158,5 1351,5 800LA4 LED flashing lights for LUXE elliptical boom, single piece 8m long 300SA1 Magnetic loop detector 315 200 320 800PG4 4 m rubber bead for elliptical boom 300SCMS1 Magnetic key switch 947 800CPRBL Counterplate (RBLO) 300SCMS3 Decoder for 300SCMS1 800AT Boom support 300CMS Magnetic key 900TOWERF Photocells mounting post 900OPTIC Set of safety photocells 900LAMP4 12 V flashing light SPRING A) C) M-06000B3000 (Ø 4,2 mm) Color: Light green RAL 6019 M-060B3060FP (Ø 6,2 mm) Color: Blue RAL 5003 B) D)* M-0600000028 (Ø 5,2 mm) Color: Green RAL 6002 M-060CITY0FP (ø 7 mm) Color: Red RAL 3000 BAR LENGHT BAR AND ACCESSORIES 2 m 2,5 m 3 m 3,5 m 4 m 800AE A A 800AE + 800AT A B C C D* * Eyelet in max. load position * The RBLO-X barrier is supplied as standard with the D spring (M-060CITY0FP), suitable for booms up to 4 m. For different boom lengths or when further optionals are to be installed please order a different spring as per enclosed chart. Please note that, compared to the nominal length of the boom, the passage clearance is reduced by 260 mm Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 87

12 VOLT AUTOMATIC BARRIER LUXE for booms up to 7m 800LUXE Automatic barrier with painted cabinet for booms up to 7m, complete with built-in electronic control board, radio receiver and battery charger. Springs, boom and flashing lights must be ordered separately. 800LUXE/I Automatic barrier with stainless steel cabinet for booms up to 7m, complete with built-in electronic control board, radio receiver and battery charger. Springs, boom and flashing lights must be ordered separately. Features: commercial use for booms up to 7 m low voltage DC motor optical encoder technology Pros: intensive use works even during power outage thanks to the optional backup battery obstacle detection and crush prevention in accordance with EN 12445-12543 standards Technical features Frequency LUXE - LUXE/I 50-60 Hz Power supply 230 V AC ±10% Absorbed power 250 W Motor power supply 18 V DC Absorbed current 10 A Max. torque 300 Nm Reduction ratio 1/512 Min. operating time 6 sec. Degree of protection IP 44 Duty cycle 100 % Operating temperature -20 C +55 C Min. width of passage clearance 4 mt Max. width of passage clearance 7 mt Weight 70 Kg The twin spring system is easily adjustable according to the length of the boom. No additional tools needed. Different models of springs available according to the features of the installation. Plastic safety cover to protect the movement of the boom from shearing. The above represented installation does not include safety devices such as safety edges. Their addition depends upon the risk assessment made on any installation in accordance with EN 12445-12453 standards. 88

Accessories 339 M-0600000028 Spring wire dia. 5,2 mm, load 90 kg (green) M-060B3060FP Spring wire dia. 6,2 mm, load 135 kg (Blue) 7098 max. 6650 mm 1105 M-060CITY0FP Spring wire dia. 7 mm, load 155 kg (red) M-060LUXE000 Spring wire dia. 9 mm, load 335 kg (Yellow) 228 447 800AE2 Elliptical white painted aluminium boom, 2 m. Flashing LED lights and rubber bead to be ordered separately 800AE3 Elliptical white painted aluminium boom, 3 m. Flashing LED lights and rubber bead to be ordered separately 945 800AE4 Elliptical white painted aluminium boom, 4 m. Flashing LED lights and rubber bead to be ordered separately 800GI Joint for elliptical boom 800RA Reinforcement insert for elliptical boom longer than 6m 800LL LED flashing lights for LUXE cabinet 800LA4 LED flashing lights for LUXE elliptical boom, single piece 8m long 800LA8 LED flashing lights for LUXE elliptical boom, double piece 8+8 m long 800PG4 4 m rubber bead for elliptical boom 800PG8 8m rubber bead for elliptical boom 800AT Boom support 800FPL Pendulum boom support 900TOWERM 10 cm side photocells mounting post 900TOWERF Photocells mounting post 900OPTIC Set of safety photocells 800CPL Luxe counterplate 800GA2 Aluminium bottom skirt, 2m 200BATT 12 V back-up battery, 7,2 Ah Solar power Thanks to the Photovoltaic (PV) Technology, every low voltage DC gate operator can be solar powered. Discover the advantages of the solar energy at page 126 Further accessories: Transmitters page 106 Photocells page 112 Flashing lights page 115 89

12 VOLT AUTOMATIC BARRIER LUXE for booms up to 7m 300SA1 Magnetic loop detector 900T-COMM RS485 Serial Interface to connect two control units as Master/Slave (Activation though TAUPROG handheld device) 250SM126 Memory card for 126 radio codes 250SM254 Memory card for 254 radio codes 250SM1022 Memory card for 1022 radio codes SPRING B) D) M-0600000028 (ø 5,2 mm) Color: Green RAL 6002 M-060CITY0FP (ø 7 mm) Color: Red RAL 3000 C) E) M-060B3060FP (ø 6,2 mm) Color: Blue RAL 5003 M-060LUXE000 (ø 9 mm) Color: Yellow RAL 1004 BOOM AND ACCESSORIES 4 4,24 (m) 4,25 4,74 (m) 4,75 5,24 (m) BOOM LENGTH 5,25 5,74 (m) 5,75 6,24 (m) 6,25 6,74 (m) 800AE + 800PG B+B B+C 1 C 2 +D - - - - 800AE + 800AT + 800PG B+B B+C 1 C 2 +D D+D D+E 1 D+E 1 E+E 800AE + 800FPL + 800PG B+C 1 C+C D+D D 2 +E D+E 1 D+E 1 E+E 800AE + 800AT + 800GA2 B+C 1 C+D 1 D+D D+E 1 E+E - - 800AE + 800FPL + 800GA2 C+C D+D D 2 +E D+E 1 E+E - - 1 The strongest spring should always be installed on the side of the vehicle entrance 2 The weakest spring must always be installed on the side of the vehicle entrance Please note that, compared to the nominal length of the boom, the passage clearance is reduced by 353 mm 6,75 7 (m) Guide to choose and combine booms and accessories 800AE4 4 m 800AE3 + 800GI + 800AE2 5 m + 800RA + 800AE3 + 800GI + 800AE3 6 m + 800RA + 800AE4 + 800GI + 800AE3 7 m All boom are conceived to install the protective rubbed bead (800PG4-800PG8), flashing LED lights (800LA4-800LA8), the pendulum boom support (800FPL) and the aluminium bottom skirt (800GA2, for booms up to 6 m). 90

SPACE SAVER PARK automatic 800PARK DC automatic park space saver 800PARKM Manual park space saver without motor Technical features Power supply Motor power supply Absorption Absorbed power Operating time 750D780M Electronic control unit for a single PARK parking space saver with built-in radio receiver (expandable up to 4 units) PARK 230 V AC (50-60 Hz) 18 V DC 1,6 A 30 W 5 sec. Duty cycle 100 % Resistance to weight 2,5 kg/cm² Operating temperature -20 C +55 C Motor thermal protection - Degree of protection IP 54 Accessories 750EXP780M Single expansion module for D780M Features: residential, industrial and public use low voltage DC motor opening time 5 seconds radio-controlled operation manual release Pros: fast opening ideal to save the park space obstacle detection and crush prevention 450 292 498 91

Bollard T-STOP resistance to impact up to 29.000 J T-STOP1404-5 Oil-hydraulic bollard, diameter 140 mm, stroke 500 mm, wall thickness 4 mm, complete with formwork. T-STOP1404-7 Oil-hydraulic bollard, diameter 140 mm, stroke 700 mm, wall thickness 4 mm, complete with formwork. T-STOP1412-5 Oil-hydraulic bollard, diameter 140 mm, stroke 500 mm, wall thickness 12 mm, complete with formwork. T-STOP1412-7 Oil-hydraulic bollard, diameter 140 mm, stroke 700 mm, wall thickness 12 mm, complete with formwork. T-STOP2004-5 Oil-hydraulic bollard, diameter 200 mm, stroke 500 mm, wall thickness 4 mm, complete with formwork. T-STOP2004-7 Hydraulic bollard, diameter 200 mm, stroke 700 mm, wall thickness 4 mm, complete with formwork. Specifications: Bollard complete with formwork Removable single-body casing, carbon steel tube, built-in oil-hydraulic pump, LED flashing light and room for cables connection box High quality carbon steel tube (type 304 stainless steel available on request) Hot-dip galvanized bollard Reflective strip T-STOP2012-5 Oil-hydraulic bollard, diameter 200 mm, stroke 500 mm, wall thickness 12 mm, complete with formwork. T-STOP2012-7 Oil-hydraulic bollard, diameter 200 mm, stroke 700 mm, wall thickness 12 mm, complete with formwork. T-STOP3012-7 Oil-hydraulic bollard, diameter 270 mm, stroke 700 mm, wall thickness 12 mm, complete with formwork. 92

800TSSEN Sensitive head (pressure activated safety device) Accessories 800TSPROG Single electronic control unit, built-in 433,92 MHz radio receiver, solenoid and traffic light, complete with IP56 box E D A Impact height 500 mm B C 800TSVAL Solenoid for automatic lowering in case of a power failure 800TSCH Security pump lock 800TSAC Acoustic 230 V IP67 alarm with 0,2 m cable to insert in the bollard 800TSPROG 4 Electronic control unit for up to 4 bollards, built-in 433,92 MHz radio receiver, solenoid and traffic light, complete with IP56 box 800TSRAE Siren sensor to detect sounds emitted from emergency vehicles. It is necessary to specify the country in which the bollard will be installed. 800TSRES Heater kit 250W 230V for low temperature, complete with bracket and 1,5m cable to insert in the bollard A B C D E T-STOP14 140 A 500/700 B 730/930 C443 262 D E T-STOP20 T-STOP14 200 140 500/700 735/935 507 500/700 730/930 327 443 262 T-STOP20 200 500/700 730/930 507 327 Ø 273 ~ 700 Ø 481 ~ 931 T-STOP30 Voltage Diameter Stroke Wall Thickness Manual Emergency Release Resistance to Impact Weight LED Light Sensitive Head Solenoid Stainless Steel Coating T-STOP1404-5 230 V 140 mm 500 mm 4 mm 2000 J 52 Kg optional - - T-STOP1404-7 230 V 140 mm 700 mm 4 mm 2000 J 62 Kg optional - - T-STOP1412-5 230 V 140 mm 500 mm 12 mm 7000 J 75 Kg optional optional - T-STOP1412-7 230 V 140 mm 700 mm 12 mm 7000 J 86 Kg optional optional - T-STOP2004-5 230 V 200 mm 500 mm 4 mm 5000 J 70 Kg optional - - T-STOP2004-7 230 V 200 mm 700 mm 4 mm 5000 J 81 Kg optional - - T-STOP2012-5 230 V 200 mm 500 mm 12 mm 15000 J 98 Kg optional optional - T-STOP2012-7 230 V 200 mm 700 mm 12 mm 15000 J 117 Kg optional optional - T-STOP3012-7 230 V 270 mm 700 mm 12 mm 29000 J 180 Kg optional optional optional 93

WINDOWS & SHUTTERS TWIN MRC-M MRC MF30 MADE IN ITALY

OPERATOR T-WIN For roller shutters up to 320 kg 850T-WIN22 230 V central motor, shaft Ø 48-60 mm, crown Ø 200-220 mm; Maximum weight 140 kg. 850T-WIN22P 230 V central motor, shaft Ø 48-60 mm, crown Ø 200-220 mm; Maximum weight 180 kg. 850T-WIN24 230 V central motor, shaft Ø 76 mm, crown Ø 240 mm; Maximum weight 180 kg. 850T-WIN24BM 230 V central motor, shaft Ø 76 mm, crown Ø 240 mm; Maximum weight 320 kg. Features: residential / commercial use lifting capacity up to 320 kg 230 V gate operator built-in mechanical limit switches electrical brake (optional, P/N 850BRK) Pros: suitable for existing roller shutters adapters for shaft Ø 48, 60 or 76 mm robust, maintenance-free Technical features Power supply Motor power supply T-WIN22 T-WIN22P T-WIN24 T-WIN24BM 220 V AC ± 10% (50-60 Hz) 220 V AC Absorption 1,6 A 2 A 2,8 A 5,1 A Absorbed power 400 W 600 W 600 W 1200 W Crown Speed 10 rpm Lifting Power 140 kg 180 kg 180 kg 320 kg Operating temperature -20 C +80 C Motor thermal protection 150 C Degree of protection IP 32 Shutter max height 8 m 96

110 VOLT AVAILABLE Accessories 850BRK Electrical brake system* 300TKEY Die-cast aluminium key switch 320 A 300BEPS External surface-mounted pushbutton with tamperproof housing 300TKEYD Europrofile cylinder, die-cast aluminium key switch A T-WIN22 ø 200 T-WIN22-1 ø 200 T-WIN22P ø 200 T-WIN22P1 ø 200 T-WIN24 ø 240 T-WIN24-1 ø 240 T-WIN24BM ø 240 T-WIN24BM1 ø 240 300BIP External flush-mounted pushbutton with tamper-proof housing 750K330M Electronic control unit for 230 V central motors with built-in 433,92 MHz radio receiver, complete with enclosure 300BIPS External flush-mounted pushbutton with emergency release system and tamperproof housing * Lifting capacity and torque decrease respectively by 10 kg an 10 Nm when the brake system is installed 97

OPERATOR MRC-M For awnings and shutters. Maximum torque 50 Nm. 850MRC20M 230 V Tubular motor, hand crank function, Ø 45 mm, c/w bracket and adapters for tube Ø 70 mm 20 Nm torque 850MRC30M 230 V Tubular motor, hand crank function, Ø 45 mm, c/w bracket and adapters for tube Ø 70 mm 30 Nm torque 850MRC40M 230 V Tubular motor, hand crank function, Ø 45 mm, c/w bracket and adapters for tube Ø 70 mm 40 Nm torque 850MRC50M 230 V Tubular motor, hand crank function, Ø 45 mm, c/w bracket and adapters for tube Ø 70 mm 50 Nm torque Features: tubular motor Ø 45 mm 230 V motor built-in hand crank function self-braking motor max. run time 4 Pros: ideal for awnings projection up to 4 m quick installation easy setting of limit switches emergency manual operation thanks to the optional hand crank easy limit switch setting Technical features MRC20M MRC30M MRC40M MRC50M Degree of protection IP 44 Power supply 230 V AC (50-60 Hz) Absorption 0,92 A 1,1 A 1,3 A 1,4 A Absorbed power 205 W 230 W 292 W 308 W Crown Speed 15 rpm 15 rpm 15 rpm 12 rpm Lifting Power 38 kg 56 kg 76 kg 94 kg Operating temperature -10 C +60 C Operating time 4 min. Torque 20 Nm 30 Nm 40 Nm 50 Nm 98

110 VOLT AVAILABLE ø 45 Accessories 850AD70C Replacement crown drive adapter kit for tube Ø 70 mm 850SND45C 45 /90 hand crank loop for shutter box 850CSVP Weather station 850ANCP Wind and twilight sensor A (mm) A MRC20M 590 MRC30M 640 MRC40M 640 MRC50M 640 850DZ68 Replacement bracket for MRC-M tubular motors 850PLV Rain sensor 850MAN150 Steel hand crank, 1500 mm, with joint arm 300PP External surface-mounted pushbutton 850OCC Hand crank loop Application chart for awnings ARM WITH 15 Kg. POWER ARM WITH 25 Kg. POWER ARMS TUBE PROMINENCE AWNING ARMS TUBE PROMINENCE AWNING 1 1,5 2 2,5 3 3,5 4 4,5 5 5,6 6 1 1,5 2 2,5 3 Ø SERIE Ø 45 mm Ø 2 70 2 70 2 78 2 78 4 70 4 70 4 78 4 78 6 70 6 78 ARM WITH 35 Kg. POWER ARM WITH 45 Kg. POWER References ARMS TUBE PROMINENCE AWNING ARMS TUBE PROMINENCE AWNING 1 1,5 2 2,5 3 3,5 1 1,5 2 2,5 3 3,5 4 2 Ø 70 2 Ø 70 MRC20M MRC30M MRC40M MRC50M 2 78 99

OPERATOR MRC For interior blinds and shutters. Maximum torque 50 Nm. 850MRC10 230 V Tubular motor, Ø 45 mm, c/w bracket and crown drive adapter kit for octagonal tube 60 mm. 10 Nm torque 850MRC20 230 V Tubular motor, Ø 45 mm, c/w bracket and crown drive adapter kit for octagonal tube 60 mm. 20 Nm torque 850MRC30 230 V Tubular motor, Ø 45 mm, c/w bracket and crown drive adapter kit for octagonal tube 60 mm. 30 Nm torque 850MRC40 230 V Tubular motor, Ø 45 mm, c/w bracket and crown drive adapter kit for octagonal tube 60 mm. 40 Nm torque 850MRC50 230 V Tubular motor, Ø 45 mm, c/w bracket and crown drive adapter kit for octagonal tube 60 mm. 50 Nm torque Materials Kg/m2 PVC 5 Wood 10 Insulated aluminium 4 Extruded aluminium 8 Insulated steel 10 Armour-plated steel 16 Technical features MRC10 MRC20 MRC30 MRC40 MRC50 Degree of protection IP 44 Power supply 230 V AC (50-60 Hz) Absorption 0,63 A 0,92 A 1,1 A 1,3 A 1,4 A Absorbed power 146 W 205 W 230 W 292 W 308 W Crown Speed 15 rpm 15 rpm 15 rpm 15 rpm 12 rpm Lifting Power 18 kg 38 kg 56 kg 76 kg 94 kg Operating temperature -10 C +60 C Operating time 4 min. Torque 10 Nm 20 Nm 30 Nm 40 Nm 50 Nm Features: tubular motor Ø 45 mm torque up to 50 Nm 230 V motor self-braking motor max. run time 4 Pros: ideal for existing shutters / blinds quick installation easy setting of limit switches 100

110 VOLT AVAILABLE Accessories ø 45 850AD60C Replacement crown drive adapter kit for octagonal tube 60 mm 850DZ68 Replacement bracket for tubular motors 850SF553 Replacement bracket for MRC tubular motors 850SF523 Adjustable bracket for MRC tubular motors 850CT60 Universal idler end cap for tube Ø 60 mm 850BTOT607 Anti-lift stopper for octagonal tube 60 mm A (mm) A MRC10 488 MRC20 488 MRC30 558 MRC40 558 MRC50 558 850SF511 Bracket for MRC tubular motors 300PP External surface-mounted pushbutton 850SF823 Click-in bracket for MRC tubular motors 750K330M Electrical control panel with 433,92 MHz radio receiver and casing Application chart for rolling shutters TUBE Ø LAST 0 10 20 30 40 50 60 70 80 90 100 110 120 SERIE Ø 45 mm References 50 60 MRC10 MRC20 MRC30 MRC40 MRC50 70 80 90 100 101

OPERATOR MF30 For top or bottom hinged windows. Maximum weight 30 kg 850MF30 230 V hinged window opener. Maximum window weight 30 kg 335 49 101 Technical features Power supply Maximum thrust load capacity Maximum traction load capacity Corse (selezionabili in qualsiasi momento) Absorption Loadless translation speed Duration of maximum loadless travel Double electrical insulation Type of service Operating temperature MF30 230 V AC (50 Hz) 300 N 300 N 200 and 380 mm 0,32 A 24 mm/sec. 16 sec. Yes S2 of 4 min. -5 C +50 C Protection of electrical devices IP 30 Adjustment of the window frame connection 15 mm Pins adjustment for swivel brackets 15 mm Connection in parallel more actuators on the same window Only by means of suitable electronic device Parallel connection of multiple actuators on different windows Yes (see wiring diagram) Chain position control Yes Electronics equipped with audible warning device to signal incorrect assembly (buzzer) Yes Weight of installed equipment 1,1 kg Features: 230 V motor double flex stainless steel chain compact size two chain adjustments: 200 or 380 mm Pros: suitable for top or bottom hinged windows noiseless and compact quick installation robust, maintenance-free 102

ACCESSORIES Transmitters and Radio Receivers Safety Devices Access Control Safety Edges Key Switches Electronic Control Units Solar Energy MADE IN ITALY

TRANSMITTERS AND RADIO RECEIVERS ROLLING CODE TECNOLOGY Features: frequency: 433,92 MHz range: up to 200 m in open air (the effective range depends on terrain and possible radio frequency interferences) 281.000 billion code combinations rolling code technology: every time the transmitter sends a code, it generates a new code using an encoder. An algorithm identifies and validates only the signal of the transmitters encoded by the radio receiver. Pros: virtually impossible to duplicate code can be personalized thanks to the TAU- PROG programmer ideal for multi-user systems a transmitter can be programmed into any number of self-learning radio receivers, thus avoiding the use of different transmitters tougher shells 250K-SLIMRP Two-channel transmitter, rolling code technology, 433,92 MHz 250T-4RP Four-channel transmitter, rolling code technology, 433,92 MHz, complete with support NEW FUNCTIONS 250TAUPROG Handheld device to program preset radio receivers and electronic control boards Thanks to the TAUPROG handheld programmer and the new TAUPROG management software it is possible to create and manage an access control database, with a wide range of new functions. Rolling code transmitters can t be duplicated or added an existing system unless enabled by the same TAUPROG handheld programmer, thanks to the unique code embedded in each TAUPROG encoder. The user-friendly TAUPROG database management software (PC version) stores database contents and allows multiple functions such as customize and add comments to every transmitter stored, add/remove new transmitters to an existing system, enable/disable codes, make back-up copies and prints. 106

250T-RADIO1 Universal system made of one 433,92 MHz single-channel and self-learning receiver with built-in aerial and a two-channel K-SLIM transmitter with rolling code technology 250T-RADIO2 Universal system made of one 433,92 MHz two-channel and self-learning receiver with built-in aerial and two four-channel T-4RP transmitters with rolling code technology 69 29 11,5 Radio receivers 73 250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250RXDC2 Self-learning, two-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250RXDC1B Self-learning, single-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250RXDC2B Self-learning, two-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250RXDC4 Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250RXDC4T 230 V Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250E1RXD 126-code memory extension for RXDC self-learning radio receivers 250E2RXD 254-code memory extension for RXDC self-learning radio receivers 250E3RXD 1020-code memory extension for RXDC self-learning radio receivers 37 45 10 14 Accessories 200BATTBUG Batteries for T-4, K-SLIM and BUG2-4 transmitters 250ANTD Aerial with 5 m cable (to be mounted on LAMP flashing lights) 250ANTD1 Aerial with mounting bracket and 5 m cable 107

TRANSMITTERS AND RADIO RECEIVERS DIP-SWITCH TECNOLOGY Features: frequency: 433,92 MHz range: up to 200 m in open air (the effective range depends on terrain and possible radio frequency interferences) 1024 code combinations dipswitch technology Pros: easy programming code can be easily changed by setting the switches inside the transmitter dipswitch transmitters can be programmed both in dipswitch and self-learning radio receivers a transmitter can be programmed into any number of self-learning radio receivers, thus avoiding the use of different transmitters tougher shells 250K-SLIM* Two-channel transmitter, dipswitch technology, 433,92 MHz 250T-4* Four-channel transmitter, dipswitch technology, 433,92 MHz, complete with support * Lifting capacity and torque decrease respectively by 10 kg an 10 Nm when the brake system is installed 108

250TXD2* Two-channel transmitter, dipswitch technology, 433,92 MHz 69 250TXD4* Four-channel transmitter, dipswitch technology, 433,92 MHz 29 11,5 73 37 45 10 14 Radio receivers 250RXTS1 Dipswitch technology, singlechannel, 433,92 MHz plug-in radio receiver. 250RXTS1B Dipswitch technology, singlechannel, 433,92 MHz radio receiver with enclosure 51 250RXTS2 Dipswitch technology, twochannel, 433,92 MHz plug-in radio receiver. 250RXTS2B Dipswitch technology, twochannel, 433,92 MHz radio receiver with enclosure 85 18 Accessories 200BATTTX Batteries for TXD2 and TXD4 transmitters 250ANTD1 Aerial with mounting bracket and 5 m cable 200BATTBUG Batteries for T-4, K-SLIM and BUG2-4 transmitters 250ANTD Aerial with 5 m cable (to be mounted on LAMP flashing lights) 109

TRANSMITTERS AND RADIO RECEIVERS SELF LEARNING TECNOLOGY Features: frequency: 433,92 MHz range: up to 200 m in open air (the effective range depends on terrain and possible radio frequency interferences) 1024 code combinations self-learning technology Pros: quick and easy programming, without opening the transmitter s shell code can be easily changed by setting the switches inside the transmitter dipswitch transmitters can be programmed both in dipswitch and self-learning radio receivers ideal for multi-user systems a transmitter can be programmed into any number of self-learning radio receivers, thus avoiding the use of different transmitters tougher shells 250K-SLIMC* Two-channel transmitter, self-learning technology, 433,92 MHz 250T-4C* Four-channel transmitter, self-learning technology, 433,92 MHz, complete with support * Lifting capacity and torque decrease respectively by 10 kg an 10 Nm when the brake system is installed 110

Radio receivers 250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250RXDC4 Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 69 250RXDC2 Self-learning, two-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250RXDC4T 230 V Self-learning, fourchannel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 29 11,5 250RXDC1B Self-learning, single-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250E1RXD 126-code memory extension for RXDC self-learning radio receivers 73 250RXDC2B Self-learning, two-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters. 250E2RXD 254-code memory extension for RXDC self-learning radio receivers 250E3RXD 1020-code memory extension for RXDC self-learning radio receivers 37 45 10 14 Accessories 250ANTD1 Aerial with mounting bracket and 5 m cable 200BATTBUG Batteries for T-4, K-SLIM and BUG2-4 transmitters 250ANTD Aerial with 5 m cable (to be mounted on LAMP flashing lights) 111

SAFETY DEVICES OPTIC Photocells and Mounting posts Features: synchronized infrared beams maximum range 20 m beam alignment adjustable up to 15 12 / 24 V power input surface mount (no welding required) Pros: compact design design suits any architectural style full range of accessories removable mounting post cover for easy installation photocells can be mounted inside the post in three different positions flat back post fits snugly against the wall and allows back-to-back installation 900OPTIC Set of infrared safety photocells, 12 / 24 V, surface mount, beam alignment adjustable up to 15, up to 20 m range 900TOWERF Photocell standard mounting post, painted aluminium, 49 cm, with removable cover for easy installation and photocell adjustment 900TOWER2F Photocell double mounting post, painted aluminium, 98 cm, with removable cover for easy installation and photocell adjustment (optional key-switch and keyswitch bracket to be ordered separately) Accessories 900CPTOWER TOWER counterplate 300TKEY Die-cast aluminium key switch 300TKEYS Key switch bracket 300TKEYD Die-cast aluminium key switch, Euro Profile Cylinder 900CPOPTIC Photocell side supports 900CFOTI Hole-cover plate for 900FOTI photocells 112

SAFETY DEVICES FOT Photocells 900FOTI Set of infrared safety photocells, 12 / 24 V, flush mount, beam alignment adjustable up to 15, up to 20 m range Features: synchronized infrared beams maximum range 20 m adjustable up to 180 (FOTEC) 12 / 24 V power input Pros: compact design design suits any architectural style 180 adjustable photocells are very useful when beams can t be perfectly aligned 900FOTEC Set of infrared safety photocells, 12 / 24 V, surface mount, adjustable up to 180, up to 10 m range 113

ACCESS CONTROL RTA for max. 80 users 300RTA Proximity transponder reader for access control. Maximum 80 users Features: 12 / 24 V power input up to 80 users NO / NC contact output self-learning card memorization through master card Pros: ideal for small scale applications simplified user management 12 / 24 V power input standalone system (no PC or special equipment needed) Accessories 300APM 300RTA extended range aerial 300PK Key fob transponder 300CARD Transponder card 114

SAFETY DEVICES LAMP Flashing light Features: wide input voltage range 230 VAC, 24 VDC and 18 VDC built-in aerial support cycle count for maintenance alert available built-in bracket for wall mount Pros: horizontal or vertical installation versions with cycle count for maintenance alert will indicate when the requisite threshold (set by the user) has been reached 900LAMP1 12/18 V flashing light 900LAMP2 230 V flashing light 900LAMP3 230 V flashing light for TAU electronic control units 900LAMP4 12/18 V flashing light for TAU electronic control units 900LAMP5 24 V flashing light for TAU electronic control units 900LAMP3C 230 V flashing light with cycle count for maintenance alert 900LAMP4C 12/18 V flashing light with cycle count for maintenance alert 900T-LED 18/24 V led flashing light 115

SAFETY EDGES For sliding gates and doors 900KITCF 2 m safety edge kit 900KITCF15 1,5 m safety edge kit Features: electromechanical safety edge to stop the gate operator in case of impact rubber edge height: 60 mm standard length: 1,5 and 2 m (longer edges available upon request) 900TWC Wireless safety edge transmitter 900TWM Wireless safety edge master receiver Pros: ideal for sliding gates and doors possible wireless application; the safety edge fitted to the leading edge of the gate will offer maximum safety and compliance to EN 12445-12453 standards 116

SAFETY EDGES For up-and-over garage doors and swing gates 900KICM120 1,20 m safety edge 900KICM180 1,80 m safety edge 900KONT120 1,20 m controlled safety edge (8,2K Ω) 900KONT180 1,80 m controlled safety edge (8,2K Ω) 900TAP Set of 2 plugs for KICM/ KONT 900GIU Set of 2 joints for KICM/ KONT 900CUR Set of 2 curves for KICM/ KONT Features: electromechanical safety edge to stop the gate operator in case of impact low voltage watertight micro switches standard length: 1,2 and 1,8 m controlled version available (8,2k Ω ) Pros: ideal for up-and-over garage doors and swing gates ensure compliance to EN 12445-12453 standards possible wireless application; the safety edge fitted to the leading edge of the gate will offer maximum safety and compliance to EN 12445-12453 standards 117

KEYSWITCHES T-KEY 300TKEY Die-cast aluminium key switch 300TKEYD Die-cast aluminium key switch, Europrofile cylinder Features: available with standard or Europrofile cylinder die-cast aluminium key switch LED courtesy light available surface or post mount Pros: tamper-proof easy installation 300TSL LED courtesy light for T-KEY 900TOWER2F Photocell double mounting post, painted aluminium, 98 cm, with removable cover for easy installation and photocell adjustment 300TKEYS Key switch bracket 118

OTHER ACCESSORIES 300SC Key switch, flush mount 300SCE Key switch, surface mount 300SC 300SCE 300TSG-4RP Wireless keypad, battery operated. Works with RXDC radio receivers or with electronic control units with built-in radio receiver 250T-PHONE 900-1800 MHz GSM dual band activator 300TSG-4RP 300SCMS1 300SCMS1 Magnetic key switch 750T-RELE Relay board for multiple installations 250T-PHONE 750T-RELE 300SCMS3 Decoder for 300SCMS1 300PPI Heavy duty pushbutton panel 300CMS Magnetic key 300PP Pushbutton panel 300SA1 Magnetic loop detector 119

12 VOLT ELECTRONIC CONTROL UNIT D749MA For swing gate operators 750D749MA Electronic control unit for one or two DC gate operators with encoder, complete with 433,92 Mhz rolling code radio receiver, battery charger, transformer and enclosure 230 124 300 Programmable Functions Automatic operation Semiautomatic operation Man present functions Pre-flashing disable Gate open led with proportional flashing Gate open led Programming through TAUPROG handheld device Photocell test at start of manoeuvre Disable photocell test Twin pair of photocells Close 5 secs after photocells Working time (TL) adjustment Gate open time (TCA) adjustment Gate open time (TCA) disable Delay wing closing Electronic force adjustment Automatic realignment after black-out Step-by-step operation (openstop-close-stop-open) No reverse in opening manoeuvre Pedestrian feature Clock function Encoder Built-in radio card Slow-down Receiver preset for digital keypads D749MA Accessories Outputs-Inputs M1 output M2 output Flashing light output Courtesy light output Electric lock output Gate open LED output 12 Vdc output for auxiliaries 24 Vdc output for auxiliaries Internal photocell FTI output External photocell FTE output Open/close input Pedestrian input Stop input Open button input Close button input Sensitive edge input 200BATT 12 V Battery, 7,2 Ah 250SM126 Memory card for 126 radio codes 750CUP Control unit enclosure protective lid 750COL Control unit mounting post D749MA 120

ELECTRONIC CONTROL UNIT D760M 230 VOLT For swing gates operators 750D760M Electronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz radio receiver, complete with enclosure 230 124 300 Outputs-Inputs M1 output M2 output Flashing light output Courtesy light output Electric lock output Gate open LED output 12 Vdc output for auxiliaries 24 Vdc output for auxiliaries Internal photocell FTI output External photocell FTE output Open/close input Pedestrian input Stop input Open button input Close button input Sensitive edge input 750CUP Control unit enclosure protective lid Accessories 750COL Control unit mounting post D760M Programmable Functions Automatic operation Semiautomatic operation Man present functions Pre-flashing disable Gate open led with proportional flashing Gate open led Limit switch Photocell test at start of manoeuvre Disable photocell test Twin pair of photocells Close 5 secs after photocells Working time (TL) adjustment Gate open time (TCA) adjustment Gate open time (TCA) disable Delay wing closing Electronic force adjustment Automatic realignment after black-out Step-by-step operation (openstop-close-stop-open) No reverse in opening manoeuvre Pedestrian feature Clock function Encoder Built-in radio card Slow-down Receiver preset for digital keypads D760M 121

12 VOLT ELECTRONIC CONTROL UNIT K996M For up-and-over garage door openers 200K996M Electronic control unit for one or two DC up-andover garage door openers with soft-stop, built-in 433,92 MHz radio receiver and enclosure 230 202 131 255 Programmable Functions Automatic operation Semiautomatic operation Man present functions Pre-flashing disable Gate open led with proportional flashing Gate open led Limit switch Photocell test at start of manoeuvre Disable photocell test Twin pair of photocells Close 5 secs after photocells Working time (TL) adjustment Gate open time (TCA) adjustment Gate open time (TCA) disable Delay wing closing Electronic force adjustment Automatic realignment after black-out Step-by-step operation (openstop-close-stop-open) No reverse in opening manoeuvre Pedestrian feature Clock function Encoder Built-in radio card Slow-down Receiver preset for digital keypads K996M Accessories Outputs-Inputs M1 output M2 output Flashing light output Courtesy light output Electric lock output Gate open LED output 12 Vdc output for auxiliaries 24 Vdc output for auxiliaries Internal photocell FTI output External photocell FTE output Open/close input Pedestrian input Stop input Open button input Close button input Sensitive edge input 750SCB12C Battery charger (optional) 200BATT 12 V Battery, 7,2 Ah K996M 122

ELECTRONIC CONTROL UNIT K892M For up-and-over garage door openers 200K892M Electronic control unit for one or two 230 V up-andover garage door openers with soft-stop, built-in 433,92 MHz radio receiver and enclosure 230 202 101 255 Outputs-Inputs M1 output M2 output Flashing light output Courtesy light output Electric lock output Gate open LED output 12 Vdc output for auxiliaries 24 Vdc output for auxiliaries Internal photocell FTI output External photocell FTE output Open/close input Pedestrian input Stop input Open button input Close button input Sensitive edge input K892M Programmable Functions Automatic operation Semiautomatic operation Man present functions Pre-flashing disable Gate open led with proportional flashing Gate open led Limit switch Photocell test at start of manoeuvre Disable photocell test Twin pair of photocells Close 5 secs after photocells Working time (TL) adjustment Gate open time (TCA) adjustment Gate open time (TCA) disable Delay wing closing Electronic force adjustment Automatic realignment after black-out Step-by-step operation (openstop-close-stop-open) No reverse in opening manoeuvre Pedestrian feature Clock function Encoder Built-in radio card Slow-down Receiver preset for digital keypads K892M 123

ELECTRONIC CONTROL UNIT D703 For commercial sliding gate operators 600D703 230/400 V electronic control unit for one gate operator with electrical brake, complete with enclosure 230 124 300 Programmable Functions Automatic operation Semiautomatic operation Man present functions Pre-flashing disable Gate open led with proportional flashing Gate open led Limit switch Photocell test at start of manoeuvre Disable photocell test Twin pair of photocells Close 5 secs after photocells Working time (TL) adjustment Gate open time (TCA) adjustment Gate open time (TCA) disable Delay wing closing Electronic force adjustment Automatic realignment after black-out Step-by-step operation (openstop-close-stop-open) No reverse in opening manoeuvre Pedestrian feature Clock function Encoder Built-in radio card Slow-down Receiver preset for digital keypads D703 Accessories Outputs-Inputs M1 output M2 output Flashing light output Courtesy light output Electric lock output Gate open LED output 12 Vdc output for auxiliaries 24 Vdc output for auxiliaries Internal photocell FTI output External photocell FTE output Open/close input Pedestrian input Stop input Open button input Close button input Sensitive edge input 750CUP Control unit enclosure protective lid 750COL Control unit mounting post D703 124

ELECTRONIC CONTROL UNIT K330M For central motors 750K330M Electronic control unit for 230 V central motors with built-in 433,92 MHz radio receiver, complete with enclosure 112 49 112 139 Programmable Functions Automatic operation K330M Outputs-Inputs M1 output M2 output Flashing light output Courtesy light output Electric lock output Gate open LED output 12 Vdc output for auxiliaries 24 Vdc output for auxiliaries Internal photocell FTI output External photocell FTE output Open/close input Pedestrian input Stop input Open button input Close button input Sensitive edge input K330M Semiautomatic operation Man present functions Pre-flashing disable Gate open led with proportional flashing Gate open led Limit switch Photocell test at start of manoeuvre Disable photocell test Twin pair of photocells Close 5 secs after photocells Working time (TL) adjustment Gate open time (TCA) adjustment Gate open time (TCA) disable Delay wing closing Electronic force adjustment Automatic realignment after black-out Step-by-step operation (openstop-close-stop-open) No reverse in opening manoeuvre Pedestrian feature Clock function Encoder Built-in radio card Slow-down Receiver preset for digital keypads 125

12 VOLT SOLAR POWER PF40 200PF40 40 Watt photovoltaic panel (540x550x35 mm) 200BATTMFR 12 Volt 27Ah battery 200RCF Adjustment board for photovoltaic panel 200PSP Support pole for photovoltaic panel 200APP Wall fixing bracket Features: photovoltaic panels can be combined with all TAU 12 V operators no need for power lines or a smart grid Pros: easy and quick installation ideal when the installation is far from available power lines battery ensures that the gate continues to work even in the event of prolonged cloudy weather energy saving and environmental friendly 200BATTMFR 200RCF 200PSP 200APP 126

To find out the optimal size of the PV power system please contact our customer care at: assistenza@tauitalia.com 127

IMPACT FORCE GAUGE Features: impact force gauge for automatic/power operated doors/gates according to EN12445-EN12453 standards display and internal storage allowing up to 50 measurements to be saved interactive menu allows sending, deleting and scrolling saved tests Pros: quick and easy set-up and software installation blue-tooth version allows a quick data transmission to the PC for an immediate analysis of values and diagrams with the extension (supplied) and the practical 180 turning handle all tests can easily be carried out even on difficult installations 900FUSB USB FORCE IMPACT GAUGE Supplied in a cushioned carrying case complete with software (PC), USB cable for data transmission, handle key, memory up to 50 tests, instruction manual and calibration certificate. Linear extension for 30 to 50 cm included 900FBLU BLUETOOTH FORCE IMPACT GAUGE Supplied in a cushioned carrying case complete with software (PC), Bluetooth Dongle Key for data transmission, spanner for handle, memory up to 50 tests, instruction manual and calibration certificate. Linear extension for 30 to 50 cm included 128

Demo material EXPO Point-Of-Purchase tools C-SHOW01 Demogate with R18BENC underground swing gate operator C-BLN Notepad C-SHOW02 Demogate with T-ONE5B sliding gate operator C-PENNA Pen C-SHOW03 Demogate with ARM2000ENC swing gate operator C-TOTEM Advertising totem pole, 165 cm 129

SPECS ARM200 Installation (mm) A ARM2000 Installation (mm) A B B C L L Installation sizes (mm)* Installation sizes (mm)* Code Door opening A B C L Code Door opening A B L ARM225 - ARM225BENC ARM250 - ARM250BENC ARM270 - ARM270BENC 90 80 180 110 200 20 1080 100 100 150 110 150 20 1080 90 80 200 115 250 20 1360 100 100 200 115 250 20 1360 90 80 250 120 300 20 1570 100 130 250 120 300 20 1570 ARM2000/F - ARM2000ENC ARM2000FC 90 140 190 150 210 805 100 170 175 150 155 805 90 140 190 150 210 775 100 170 175 150 155 775 * Follow the instructions for the installation * Follow the instructions for the installation EASY Installation (mm) BRCE1 Installation (mm) minimum 250 mm 90 90 260 140 EASYwith articulated arm EASY with BRCE1 130

SALES TERMS SALES CONDITIONS Unless agreed otherwise, prices indicated in the current price-list are intended as ex works and inclusive packing in cardboard boxes. VAT and all Taxes are to the customer s charge. The prices indicated in the current price-list are not binding and company TAU s.r.l. reserves the right to amend them without notice. TAU s.r.l. disclaims all resposibility for non-compliance of safety standars and for incorrect use of the product by unqualified installer. Company TAU s.r.l. conserves ownership of the goods supplied until such time as full payment has been made. For bulk quantities ask for offer. DELIVERY: Ex works. GUARANTEE: See the certificate enclose to the product. THESE GENERAL SALES CONDITIONS CANCEL AND REPLACE THE PREVIOUS VERSIONS IN USE. N.B.: Due to its continued product improvement policy and its desire to more closely satisfy market requirements, TAU srl reserves the right to modify the technical data and the contents of this publication without prior notice. It also declines liability for any printing or transcription errors. 131

TAU NEWS Do you want a sneak peek on Tau s latest products before the editing of the catalogue? Use your smartphone QR Code reader to learn more! What is the QR CODE? The QR CODE is a 2D matrix barcode consisting in black modules placed inside a square scheme. It is used to memorize pieces of information that should normally be read by a mobile or a smartphone. A single cryptogram contains 7.089 numerics and 4.296 alphanumerics. QR is the English acronym for quick response. As a matter of fact, the code was created in order to allow a quick decoding of its content. How to read the QR code? In order to read the 2D code, mobile or smartphones should install the proper reader. On new generation mobile phones (Nokia, Samsung, LG and so on) such software is installed as standard. Anyway, the software can easily be downloaded on the internet. Use your smartphone to take a picture of the code and you will discover TAU s latest products.