Gate Automation F.H.Brundle SERVING THE TRADE since 1889 Approved Distributor
BRUNDLE F.H.BRUNDLE SERVING THE TRADE SINCE 1889 BRUNDLE Having served his apprenticeship as an ironmonger in Canterbury, young Frederick Henry Brundle moved to London to work for a company supplying the tea trade. It was not long before he spotted an opportunity and, with a loan from his father, set up a business supplying nails and ironmongery to the booming packing case industry. He also added to his range, horse shoes and farrier s sundries. Throughout London, the name of F.H.Brundle became synonymous with quality and competitive prices. Frederick Henry Brundle As trade has changed over the years, F.H.Brundle has adapted to meet the needs of their customers. When business moved outwards from London, branches were set up to serve customers further afield with an ever-widening stock range. As you will see from this catalogue we actually stock a huge range which we offer at consistently keen prices. Our depots are geared to respond quickly, each holding large stocks and operating a fleet of vehicles to provide a fast, personal service. Michael Brundle and Richard Brundle M.B.E. Our business is now run by Richard Brundle, the fourth generation and his son Michael. We are certain that we will be providing our customers with a quality service for many years to come. GLASGOW Tel: 0141 332 3231 Fax: 0141 332 7325 Email: glasgow@brundle.com EDINBURGH Tel: 0131 335 5999 Fax: 0131 335 5911 Email: edinburgh@brundle.com ST HELENS Tel: 01942 86 88 88 Fax: 01942 86 88 99 Email: haydock@brundle.com ILKESTON Tel: 0115 930 2070 Fax: 0115 951 2455 Email: ilkeston@brundle.com BIRMINGHAM Tel: 0121 565 8282 Fax: 0121 565 8292 Email: birmingham@brundle.com NEW LOCATION B66 2EP LONDON Tel: 01708 25 35 45 Fax: 01708 25 35 50 Email: sales@brundle.com SOUTHAMPTON Tel: 023 8070 3333 Fax: 023 8070 5555 Email: southampton@brundle.com HUGE STOCKS - NATIONWIDE SERVICE KEEN PRICES
Gate Automation F.H.Brundle are your one-stop shop for every type of CAME gate automation equipment. If we don t have the equipment or parts you require in stock, we can get them delivered to you on site the following day. There are 4 different types of electromechanical gate automation: Types of Gate Automation Underground Worm Drive Articulated Arm Sliding pages 6-9 pages 10-12 pages 13-15 pages 16-21 We only stock CAME gate automation equipment because we believe it to be the safest and most reliable on the market today. All of the operators featured in this catalogue can be controlled using any combination of CAME automation accessories, which can be found on pages 23-27. Safety All products are rigorously tested at CAME s research facility in Italy to ensure they meet strict European safety standards, and come with a full 3-year manufacturers warranty. However, once these products are fitted to a gateway it becomes the responsibility of the gate manufacturer/installer to ensure that the installation is compliant with European Machinery Directive 98/37/EC and BS EN12453. Whenever you see the EN Tested logo in this catalogue, it means that product is force-limited, making it even easier for installers to comply with the legislation without additional safety accessories. If you are unsure about the safety aspects of gate automation, we strongly recommend attending a 1 day FREE training seminar at CAME Training Centres in Nottingham or Manchester. Book TODAY by emailing cametraining@brundle.com For more information visit www.fhbrundle.co.uk 3
Selection guide Application Series Kit codes Max gate leaf width: 3m 21FROGAES24 21FROGAEP24 3.5m (11.5ft) Underground (Swing) Worm Drive (Swing) Frog pg.6-7 Myto pg.8 Frog-J pg.8 Frog Plus pg.9 Amico pg.10 Axo pg.11 21FROGAES 21FROGAEP 21FROGS 21FROGP 21MYTOS24 21MYTOP24 21FROGJS 21FROGJP 21FROGPS5 21FROGPP5 21FROGPS7 21FROGPP7 21AMICOS24 21AMICOP24 21AMICOS230 21AMICOP230 21AXOS324 / 21AXOP324 21AXOS3 / 21AXOP3 21AXOS4 21AXOP4 21AXOS524 21AXOP524 21AXOS7 21AXOP7 21KRONOP3 3.5m (11.5ft) 1.8m (6ft) 1.8m (6ft) 5.5m (18ft) 7m (23ft) 1.8m (6ft) 1.8m (6ft) 3m (10ft) 4m (13ft) 5m (16ft) 7m (23ft) 3m (10ft) Frog-J Myto Amico Articulated Arm (Swing) Krono pg.12 Stylo pg.13 Ferni pg.14 Fast pg.15 21KRONOS5S 21KRONOS5D 21KRONOP5 21STYLOAS24 21STYLOAP24 21STYLOSS24 21STYLOSP24 21FERNIES24 21FERNIEP24 21FERNIES 21FERNIEP 21FASTS24 21FASTP24 21FASTS 21FASTP 5m (16ft) 1.8m (6ft) 4m (13ft) 4m (13ft) 2.3m (7.5ft) 2.3m (7.5ft) Stylo Max gate weight: Sliding BX pg.16-17 BK pg.18-19 21BX243KIT 300kg Mod.4 21BX74KIT 400kg Mod.4 21BX246KIT 600kg Mod.4 21BXPKIT 600kg Mod.4 21BX78KIT Mod.4 21BX10KIT Mod.4 21BK800KIT Mod.4 21BK1200KIT 21BKE1200K 1200kg Mod.4 21BK1200PKIT 1200kg Mod.4 21BK1800KIT 21BKE1800KIT 21BK2200KIT 21BKE2200KIT 1 2200kg Mod.4 BY3500T pg.20 21BY3500TKIT 3500kg Mod.6 Mod.4 or Mod.6 BX-243 4 Free delivery on orders over 150.00
4m 5m 6m 7m 230-400V AC 3-Phase Motor Frog 230V AC Motor Frog-Plus 230V AC Intensive Use 24V DC Motor Axo 24v DC motors are specifically designed for intensive use. With the use of a battery backup card, they can also continue to function during a power cut. Axo 7 230-400v AC 3-phase motors are specifically designed for heavy industrial use. Krono Ferni Fast 2000kg 3500kg CAME s 3 year parts warranty is the most comprehensive on offer from any brand in the automation industry. BX Mod. 4 or 6 BK BY3500T CAME sliding gate operators use either a Mod.4 or a Mod.6 rack. This is a unit of measurement for how big the teeth are on the motor wheel. If your motor is Mod.4, you need a Mod.4 rack to attach to your gate. (See page 21 for the range of racks available). Delivery nationwide from stock 5
Frog-AE Underground FrogAE-P 2 x FROG 230V motors + encoder 2 x Steel foundation cases 2 x Lever key release mechanism Code: 21FROGAEP FrogAE-P24 2 x FROG 24V motors + encoder 2 x Steel foundation cases 2 x Lever key release mechanism Code: 21FROGAEP24 FrogAE-S 1 x FROG 230V motor + encoder 1 x Steel foundation case 1 x Lever key release mechanism Code: 21FROGAES FrogAE-S24 1 x FROG 24V motor + encoder 1 x Steel foundation case 1 x Lever key release mechanism 2.5m* 600kg Code: 21FROGAES24 * We recommend provision be made for an electric lock (see page 25) if the leaf is wider than 2.5m. 3.5m* 400kg Buried underground, Frog is the most desirable method of automating a gateway Corrosion resistant and reliable in damp conditions The irreversible geared motor firmly locks the gates, unlike hydraulic machines, which generally allow their pistons to relax Frog-AE model features Encoder based electronics for easier EN compliance Manual release mechanism in the event of a power cut Perfect for wooden or metal gates Pivot Point Pillar Top Hinge Optional Accessories: Lock81 Electric Latch. Recommended for gates larger than 2.5m or situated in exposed, windy locations. Code: 21LOCK81 Ground Level Bottom Hinge Lorem ipsum sectetuer ad sapien. Aliqu molestie dol erat posuere dignissim. In vulputate la in libero nec Aliquam ero quis, tristiqu dictum. Cura ger orci. Fusc ipsum. Quisq laoreet volu pede, sceleri cursus. Aliqu isque quis, tr vector Concrete Drainage Hole 6 Electric locks can be found on page 25
Frog Underground Frog-P 2 x FROG 230V motors 2 x Steel foundation cases 2 x Lever key release mechanism Code: 21FROGP Frog-S 1 x FROG 230V motor 1 x Steel foundation case 1 x Lever key release mechanism Code: 21FROGS cursus. Aliquam eros pede, sceler- Optional Accessories: A4370 Transmission lever for opening arcs of up to 140 Code: 21A4370 The illustration below displays items that are not necessarily supplied in the standard kits we offer. All listed equipment is available separately. The installation of infrared-beams or mechanical-contact safety edges is essential if a careful risk analysis requires it. FL-180 Chain-driven transmission lever for opening arcs of up to 180 Code: 21FL180 2.5m* 600kg * We recommend provision be made for an electric lock (see page 25) if the leaf is wider than 2.5m. 3.5m* 400kg Note: Certain items listed in the kits on this page (namely control board, remote controls or s) may be substituted without prior notice for a comparative alternative if the advertised item is temporarily out of stock. 4 160 60 ground FINISHING 405 330 For extra safety protection also consider DF Sensitive Safety Edge with a DFI Electronic control card (see page 23) radio receiver motor & casing optional control board for safety or activation control panel motor & casing 3 year guarantee as standard 7
Myto Underground Small, lightweight gate operator Easy to install, with less digging and simplified wiring connection Can still function in emergency mode during a power cut. It also features a built-in manual release lever 1.8m 200kg MYTO-S24 1 x MYTO 24V motor + encoder 1 x Steel foundation case 1 x Transmission arm Code: 21MYTOS24 MYTO-P24 2 x MYTO 24V motors + encoder 2 x Steel foundation cases 2 x Transmission arm Code: 21MYTOP24 Can be positioned above or below ground. Below-ground motor in standard position Above-ground motor positioned to the side (when space is an issue) Above-ground motor in standard position Below-ground motor positioned to the side (when space is an issue) frog-j Underground 68 85 1.8m 200kg ground FINISHING CONCRETE FrogJ-S 1 x FROGJ 24V motor + encoder 1 x Underground foundation case 1 x Manual Release Assembly Code: 21FROGJS FrogJ-P 2 x FROGJ 24V motors + encoder 2 x Underground foundation cases 2 x Manual Release Assembly Code: 21FROGJP 8 For the full range of intercom systems see pages 26-27
Frog-PLUS Underground 3.5m* 1100kg 5m* 7m* 550kg Industrial swing gates up to 5.5 metres per leaf: Industrial swing gates up to 7 metres per leaf: FrogPlus-P5 FrogPlus-S5 FrogPlus-P7 FrogPlus-S7 2 x FROG-PM4 230V motor + encoder cursus. Aliquam eros pede, sceler- 1 x FROG-PM4 isque tristique quis, cursus. 230V motor + encoder 1 or 2 Steel foundation cases libero nec mi ipsum. Quisque in orci. ger Fusce vulputate at lacus dictum. Curabitur dignissim. Inte- 1 or 2 Lever key release mechanism tristique placerat quis, c. cursus, scelerisque 1 Aliquam x eros Radio pede, receiver mi in laoreet nec volutpat. libero Quisque ipsum. at lacus vulputate Fusce orci. Integer dignissim. Curabitur dictum. posuere erat ut eros quis Integer dolor. molestie purus aliquet Aliquam sapien. 2 x FROG-PM6 1 x FROG-PM6 230V motor + encoder 230V motor + encoder 1 or 2 Steel foundation cases 1 or 2 Lever key release mechanism Code: 21FROGPP5 Code: 21FROGPS5 Code: 21FROGPP7 Code: 21FROGPS7 *We recommend the use of an electric lock (see page 25) on the gate leaf. Robust, sturdy and powerful Corrosion resistant and reliable in damp conditions Automate large heavy gates up to 7m per leaf Suitable for high rates of traffic flow Easily maintained Affordable Features interchangeable supporting pin The supporting pin is fitted with bolts to the foundation box It can easily be replaced if required This simplifies system maintenance and prolongs working life To book your FREE training course email cametraining@brundle.com 9
AMICO Worm Drive Kits for a pair of swing gates Amico-P 2 x AMICO 230V motors Code: 21AMICOP230 Amico-P24 2 x AMICO 24V motors + encoder 1 x 24V Control panel Code: 21AMICOP24 Kits for a single swing gate Amico-S 1 x AMICO 230V motor Amico-S24 1 x AMICO 24V motor + encoder 1 x 24V Control panel Amico is perfect for automating lightweight gates in residential settings Axo is perfect for larger, heavier gates in residential and commercial settings Both motors feature a simplified connection system requiring just a single 3-core cable Encoder-based technology enables controlled deceleration of the gates Code: 21AMICOS230 Code: 21AMICOS24 1m 250kg 1.5m 215kg 1.8m 200kg motor hinge Amico motor flashing light control panel 3-core cable Amico motor radio remote controls The installations illustrated display items that are not necessarily supplied in the standard kits we offer. All listed equipment is available separately. The installation of infrared-beams or mechanical-contact safety edges is essential if a careful risk analysis requires it. Note: Certain items listed in the kits on these pages (namely control board, remote controls or safety photocells) may be substituted without prior notice for a comparative alternative if the advertised item is temporarily out of stock. 10 Safety edge can be found on page 23
AXO Worm Drive 230V Kit for swing gates up to 3 metres per leaf: 230V Kit for swing gates up to 4 metres per leaf: 230V Kit for swing gates up to 7 metres per leaf: AXO-P3 AXO-S3 AXO-P4 AXO-S4 AXO-P7 AXO-S7 cursus. Aliquam eros pede, sceler- 2 x AXO 230V motor 1 x AXO 230V motor 2 x AXO 230V motor 1 x AXO 230V motor 2 x AXO 230V motor 1 x AXO 230V motor isque orci. ger Fusce vulputate at lacus Curabitur dignissim. Inte- with radio decoder dictum. c. tristique quis, placerat cursus, pede, scelerisque Aliquam 1 eros x Radio receiver mi in laoreet nec volutpat. libero Quisque ipsum. at lacus vulputate Fusce orci. Integer dignissim. Curabitur dictum. posuere erat ut eros quis Integer dolor. molestie purus aliquet Aliquam sapien. with radio decoder with radio decoder Code: 21AXOP3 Code: 21AXOS3 Code: 21AXOP4 Code: 21AXOS4 Code: 21AXOP7 Code: 21AXOS7 Pictured: 21AXOP3 2.5m 600kg 3m 500kg Pictured: 21AXOS4 3m 500kg 4m* 300kg Pictured: 21AXOP7 1000kg 4m* 500kg 7m* 300kg * We recommend provision be made for an electric lock (see page 25) if the wing is wider than 4m. Electric lock is mandatory for Axo-P7 and Axo-S7 kits. control panel DFI electronic card Also available with 24V DC motor for intensive use sensitive safety edge 24V Kit for swing gates up to 3 metres per leaf: 24V Kit for swing gates up to 5 metres per leaf: isque Aliquam eros pede, sceler- cursus. AXO-P324 AXO-S324 AXO-P524 AXO-S524 2 x AXO 24V motor 1 x AXO 24V motor 2 x AXO 24V motor 1 x AXO 24V motor ger dictum. Curabitur Inte- dignissim. tristique quis, cursus, c. placerat eros scelerisque pede, Aliquam nec libero in laoreet volutpat. mi lacus ipsum. vulputate Quisque at Fusce orci. Integer dignissim. Curabitur dictum. posuere erat ut eros quis Integer dolor. molestie purus aliquet Aliquam sapien. 3m 500kg dictum. Curabitur dignissim. Inte- ger Lorem ipsum dolor sit amet, con- sectetuer 1000kg 3m 700kg 5m* 400kg aluminium support post Code: 21AXOP324 Code: 21AXOS324 Code: 21AXOP524 Code: 21AXOS524 For more information visit www.fhbrundle.co.uk 11
Krono Worm Drive 1000kg 4m* 500kg Note: Limits above are for 5m Krono only * We recommend provision be made for an electric lock (see page.25) if the leaf is wider than 2.5m. 5m* 400kg KRONO - For small hinge geometry situations... KRONO-S5S 1 x KRONO 230V motor (Left-Handed) Code: 21KRONOS5S KRONO-S5D 1 x KRONO 230V motor (Right-Handed) Code: 21KRONOS5D 3m* 400kg KRONO-P3 cursus. Aliquam eros pede, sceler- 230V Kit for swing gates up to isque tristique quis, cursus. 3 metres per leaf: Lorem ipsum dolor sit amet, con- 2 x KRONO 230v motor Quisque ipsum. in libero mi nec ger Inte- dignissim. dictum. Curabitur placerat c. 1 x Radio quis, tristique cursus, receiver scelerisque Aliquam pede, eros mi in laoreet nec volutpat. libero Fusce orci. Integer dignissim. Curabitur dictum. posuere erat ut eros quis Integer dolor. molestie 1 x Flashing light purus aliquet Aliquam sapien. a Ut elit. adipiscing sectetuer Code: 21KRONOP3 Kits for a pair of swing gates KRONO-P5 230V Kit for swing gates up to 5 metres per leaf: 2 x KRONO 230v motor Code: 21KRONOP5 The installations illustrated display items that are not necessarily supplied in the standard kits we offer. All listed equipment is available separately. The installation of infrared-beams or mechanical-contact safety edges is essential if a careful risk analysis requires it. flashing light junction box control panel Krono motor Krono motor Note: Certain items listed in the kits on these pages (namely control board, remote controls or s) may be substituted without prior notice for a comparative alternative if the advertised item is temporarily out of stock. 12 Free delivery on orders over 150.00
stylo Swing Arm Gate Automation Articulated Arm Kits For lightweight gates hung from posts as thin as 8cm StyloA-S24 1 x STYLO 24V motor + encoder 1 x STYLO Articulated arm 1 x 24V Control panel Code: 21STYLOAS24 StyloA-P24 2 x STYLO 24V motors + encoder 2 x STYLO Articulated arms 1 x 24V Control panel Code: 21STYLOAP24 Optional Accessories: Transmission Arm Kits For lightweight gates opening against a wall or fence vector isque quis, tr cursus. Aliqu pede, sceleri laoreet volu ipsum. Quisq ger orci. Fusc LB90 emergency backup card for connecting 2 x 12v batteries. Code: 21LB90 dictum. Cura quis, tristiqu Aliquam ero in libero nec vulputate la dignissim. In erat posuere molestie dol sapien. Aliqu sectetuer ad Lorem ipsum StyloS-S24 1 x STYLO 24V motor + encoder 1 x STYLO Transmission arm 1 x 24V Control panel Code: 21STYLOSS24 StyloS-P24 2 x STYLO 24V motors + encoder 2 x STYLO Transmission arms 1 x 24V Control panel Code: 21STYLOSP24 0.8m 150kg 1. 125kg 1.8m 100kg Delivery nationwide from stock 13
Ferni Articulated Arm Kits for a pair of swing gates Kits for a single swing gate Automate gates hung from large brick or stone pillars Winding arm mechanism ensures fastest possible opening time; perfect for gateways onto a main road Suitable for left or right mounting Encoder based electronics for easier EN compliance Manual release mechanism in the event of a power cut FerniE-P24 2 x FERNI 24V motor 1 x 24v control panel ve pede, scelerisque eros Aliquam nec mi laoreet volutpat. libero in vulputate Quisque at lacus ipsum. 2 x dignissim. Remote Integer controls orci. Fusce Curabitur dictum. posuere erat ut eros quis Integer dolor. molestie purus aliquet Aliquam sapien. isque q FerniE-P cursus. + encoder dictum. Curabitur dignissim. Inte- 2 x FERNI 230V motor ipsum. Quisque nec in mi libero at lacus vulputate Fusce orci. ger 1 x 230v control panel pede, s laoreet ipsum. ger orc dictum quis, tr FerniE-S Aliquam + encoder in liber vulput digniss erat po FerniE-S24 1 x FERNI 230V motor 1 x FERNI 24V motor 1 x 230v control panel 1 x 24v control panel Code: 21FERNIEP24 Code: 21FERNIEP Code: 21FERNIES Code: 21FERNIES24 Optional Accessories: F1001 straight telescopic arm.* (Max each wing) Code: 21F1001 H3000 Cord operated release mechanism with protective casing. Code: 21H3000 molest sapien sectetu Lorem * Use F1001 when the motor is to be mounted above the application (i.e. swing doors). The installations illustrated display items that are not necessarily supplied in the standard kits we offer. All listed equipment is available separately. The installation of infrared-beams or mechanical-contact safety edges is essential if a careful risk analysis requires it. MAX 380mm 400mm MIN For extra safety protection also consider DF Sensitive Safety Edge with a DFI Electronic control card (see page 23) control panel Note: Certain items listed in these kits (namely control board, remote controls or s) may be substituted without prior notice for a comparative alternative if the advertised item is temporarily out of stock. 14 2.5m 600kg * We recommend provision be made for an electric lock (see page 25) 4m* 400kg Electric locks can be found on page 25 junction box Ferni motor
Fast Articulated Arm The quickest and easiest way to automate your gates... 190mm MIN 200mm MAX 24V DC Motor for intensive use 1m 300kg 1.5m 250kg 215kg 2.3m 200kg FAST-S 1 x FAST 230V motor 1 x 230V built-in control panel 1 x Flashing light Code: 21FASTS DF sensitive safety edge FAST-S24 1 x FAST 24V motor 1 x 24V Control panel with decoder 1 x Flashing light Code: 21FASTS24 CE conformity sign (optional) flashing light + antenna DFI electronic control card DF sensitive safety edge Fast motor FAST-P 2 x FAST 230V motors 1 x 230V built-in control panel 1 x Flashing light Code: 21FASTP FAST-P24 2 x FAST 24V motors 1 x 24V Control panel with decoder 1 x Flashing light Code: 21FASTP24 3 year guarantee as standard Optional Accessories: F7002 straight transmission arm and sliding guide.* support post Code: 21F7002 * Use when the gate opens up to 110 and a fixed obstacle in the opening zone (i.e adjacent wall) is less than 200mm from the motor. 15
BX Sliding Gate Automation Mod.4 14m sliding gates 400kg 230V AC motors BX-74 Kit Sliding Gate Kit: BX-10 Kit Sliding Gate Kit: 20m sliding gates 1 x BX74 230V motor with built-in control panel 1 x BX10 230V motor with LCD control panel Code: 21BX74KIT Code: 21BX10KIT Pratico system on BX-P motor allows the gate to be released using the radio remote control and then manually opened.* Pratico Radio Release 14m sliding gates 600kg * This is in addition to the mechanical manual release available on all models. BX-P Kit Sliding Gate Kit: 1 x BX-P 230V Pratico motor with built-in control panel Code: 21BXPKIT BX-78 Kit Sliding Gate Kit: 1 x BX78 230V motor with built-in control panel Code: 21BX78KIT 14m sliding gates guide roller plate flashing light + antenna Optional Accessories: mod.4 rack DF sensitive safety edge DF sensitive safety edge DFI electronic card BX motor This illustration displays items that are not necessarily supplied in the standard kits we offer. All listed equipment is available separately. B4337 Chain transmission device. Can be used when it is not practical to weld a rack to the gate. Code: 21B4337 The installation of infrared-beams or mechanicalcontact safety edges is essential if a careful risk analysis requires it. Note: Certain items listed in the kits on this page (namely control board, remote controls or s) may be substituted without prior notice for a comparative alternative if the advertised item is temporarily out of stock. 16 Toothed rack can be found on page 21
BX Sliding Gate Automation Mod. 4 24V DC motors for intensive use BX-74 AND BX-243 models are suitable for lightweight sliding gates in residential applications Other BX motors are suitable for much heavier gates in residential, commercial or apartment block settings Features self-diagnosing safety devices Features adjustable mechanical end-stops Encoder based electronics for easier EN compliance Securely locked manual release mechanism in the event of a power cut 18m sliding gates 600kg More Accessories: BX-246 Kit Sliding Gate Kit: 1 x BX246 24V motor with built-in control panel Code: 21BX246KIT LBD2 battery backup card for BX-246. Code: 21LBD2 8.5m sliding gates 300kg Optional Accessories: BX-243 Kit Sliding Gate Kit: 1 x BX243 24V motor with built-in control panel For extra safety protection also consider the DB Safety System (see page 23) Code: 21BX243KIT LB90 battery backup card for BX-243. Code: 21LB90 See page 21 for toothed racks. See pages 28-35 for rollers, tracks, wheels etc. Call F.H.Brundle to discuss your requirements 17