Press Release Trade Fair SCHWEISSEN & SCHNEIDEN Essen, Germany (September 16 th to 21 st, 2013) Visit us: HBS Bolzenschweiss-Systeme GmbH & Co. KG Felix-Wankel-Str. 18 85221 Dachau / Germany www.hbs-info.com
SCHWEISSEN & SCHNEIDEN 2013: HBS bets on innovation and efficiency At SCHWEISSEN & SCHNEIDEN in Essen, HBS Bolzenschweiss-Systeme GmbH & Co. KG from Dachau is exhibiting innovative cutting-edge technology, thereby documenting its status as an international leader in stud welding technology. Thanks to its more than 35 years of experience, HBS is today an undisputed technology leader in the area of stud welding technology for industry and trades, even when measured by international standards. The team from Dachau will demonstrate this at "SCHWEISSEN & SCHNEIDEN" in Essen. At the trade show, visitors will be presented with a representative cross section of the extensive product range from manual equipment through to semi- and fully-automatic nut/sleeve and stud welding machines. HBS welding elements also belong to the product range. Their use guarantees consistently high joint welding quality. In addition, the integrated system and service expertise of HBS in project business will be documented using current projects.
Efficient trio thanks to inverter-capacitor charging technology The new CDi series with CDi 1502, CDi 2302 and CDi 3102 for stud welding with capacitor discharge In line with the subject of maximum efficiency, the trade fair presentation of the trendsetting CDi series with inverter-capacitor charging technology offers ground-breaking advantages in the field of capacitor discharge stud welding. Crucial characteristics of this impressive development are the radical weight reduction together with, in particular, the extremely high cost efficiency. In this way, the HBS inverter technology significantly reduces the power consumption, which not only cuts the costs but also sets a new benchmark for stud welding in terms of environmental impact. This also holds true when it comes to the significantly reduced charging time achieved through the inverter charging technology. The welding sequence is therefore considerably increased which means saving an enormous amount of time. At http://www.hbs-info.de/presse, you will also find detailed product descriptions in a flyer, data sheet information as well as high-resolution images. We would be pleased to demonstrate all of the key features of these devices to you at our booth at SCHWEISSEN & SCHNEIDEN. Download: www.hbs-info.com/presse
Fast & precise CDi 1502 Automatic This top, entry-level device for automatic stud welding with capacitor discharge is the absolute innovation within the new CDi series. Particularly in combination with the PAH-1 automatic stud welding gun, it is an unbeatable duo. Thanks to state-of-the-art inverter-capacitor charging technology, the device saves the user valuable money in addition to time and energy! Through the invertercapacitor charging technology alone, 100% higher welding rates are possible while at the same time achieving a 30% reduction in energy consumption! As a result, the CDi 1502 Automatic is the device with the fastest welding rate in its class! The weight savings of 20% compared to the previous model paired with extremely simple operation also considerably simplifies daily work with the device. At http://www.hbs-info.de/presse, you will also find detailed product descriptions in a flyer, data sheet information as well as high-resolution images. We would be pleased to personally demonstrate all advantages of this outstanding device to you on-site at SCHWEISSEN & SCHNEIDEN.
The Special Interest Innovation from HBS: The new ACCU-TWIN With the ACCU-TWIN, HBS is the first manufacturer to develop a batterypowered stud welding machine with a double welding gun used specifically for securing heat cost allocators to panel radiators. It has been completely developed to meet the demands of the customers and satisfies all requirements for modern heat cost allocation metering! For example, the practical cable wrap system and the external gun compartment eliminate the need for an additional case, and the special carry strap provides for extremely high mobility, which is particularly helpful during work on high heating elements. The intelligent energy display and an exact counter for the completed welds are just a few of the many key features of this device. Of course, this device can be seen at the HBS stand as well, and we would be pleased to discuss its features with you in detail onsite. At http://www.hbs-info.de/presse, you will also find detailed product descriptions in a flyer, data sheet information as well as high-resolution images. We would be pleased to demonstrate all of the key features of this device to you at our booth at SCHWEISSEN & SCHNEIDEN
Cost-effective & reliable Stud Welding Machine CPW 0604 In the field of systems engineering, HBS is presenting the CPW 0604 stud welding machine. The CPW 0604 offers high efficiency and positioning accuracy as well as maximum flexibility for different welding procedures such as capacitor discharge stud welding, drawn arc welding or short cycle drawn arc welding - even in applications with different work piece heights! The cost-effective and reliable HBS system stands out due to its appealing design and perfect functionality. Other highlights include the easy programming, high cycle rates and rapid operating speeds. At http://www.hbs-info.de/presse, you will find detailed product descriptions in a brochure as well as high-resolution images. We would be pleased to demonstrate all of the key features of this machine to you at our booth at SCHWEISSEN & SCHNEIDEN
Press Release Maximum mobility HBS develops new IT Mobility System for inverter stud welding machines Organisation is half the battle. That may sound like a cliché; however, it is true nonetheless, and of considerable importance, especially in an industrial environment. Without optimised logistical workflows, it would be virtually impossible to maintain long-term competitiveness. Even if problems do arise, it is therefore all the more crucial that efficient process chains are not interrupted unnecessarily. This is also true of sectors such as the automotive industry, which features a high level of automation. Yet although this keeps processing times to a minimum, any reworking within a series can quickly become very costly. And should it become necessary to actually reject a product, things can start to get really expensive. This is where the latest innovation from HBS Bolzenschweiss-Systeme GmbH & Co. KG comes into its own. As an accessory option for their IT 50, IT 90 and IT 130 ARC inverter stud welding machines, the team from Dachau, Germany, have now developed a portable IT Mobility System. Designed as a mobile workstation, the system includes all the equipment and materials a welder needs, providing space for four welding guns and two ground cables with room to spare. «. Highlights of the IT Mobility System 4 adjustable mountings for stud welding guns 2 adjustable mountings for ground cables Secure and stable gas cylinder holder (with two fasteners) Compartment box in an ergonomic, easy-to-reach location Sturdy design: the IT Mobility System is integrated into the machine frame The stud welding guns and ground cables can now be easily and conveniently stored. Annoying cable clutter is also a thing of the past all in all, allowing work to be completed much more easily and more effectively. Most importantly, it is possible to move from one assembly station to the next along the production line without losing time as the system is immediately ready for use. At http://www.hbs-info.de/presse, you will find high-resolution images of the IT Mobility System. We would be pleased to personally demonstrate all advantages to you on-site at SCHWEISSEN & SCHNEIDEN. HBS BolzenschweissSysteme GmbH & Co. KG Felix-Wankel-Straße 18 85221 Dachau / Germany Telefon +49 8131 511-0 Telefax +49 8131 511-100 post@hbs-info.com www.hbs-info.com