GE Transportation. 7FDS Medium-Speed Diesel Generators High efficiency reciprocating engines with low life-cycle costs

GE Transportation 7FDS Medium-Speed Diesel Generators High efficiency reciprocating engines with low life-cycle costs

Efficient, cost-effective operation in harsh environments With the highest fuel efficiency and lowest life-cycle costs in its A heavy-duty cast mainframe with fully sectionalized power class, GE Transportation s reliable 7FDS medium speed diesel assemblies simplifies maintenance, provides easy removal, engines provide maximum availability and minimum maintenance and minimizes parts inventory levels. Designed for a 20-year costs. Available in 8, 12, or 16 cylinder configurations, these diesel lifetime with extended maintenance intervals, GE s 7FDS generator sets run from 900 to 1000 rpm and with generation engine is specifically engineered to meet the demands of voltage up to 13,800 kv. power generation. These rugged, durable systems allow: Ideally suited for continuous prime, peaking, and black start Continuous operation in a desert environment (with a cyclonic or paper type air filtration system) operations, GE s 7FDS generator sets offer a full range of power solutions from 1.2 to 3 MW in enclosed and non-enclosed configurations providing reliable power for utility and industrial applications, and oil and gas fields. Uninterrupted operation during and after hurricane force winds Standard heavy duty cooling system up to 50 C with no derate Flexible operation in island mode, load share, black start, or parallel to utilities GE s engines are designed with ease of maintenance in mind. The power assemblies can be easily exchanged, cylinder heads are welded to the liners to avoid gasket leakage, and sectional camshafts are easily accessible through large crankcase doors. 16 cylinder GE 7FDS diesel engine. 3 MW self-contained package. 12 cylinder GE 7FDS diesel engine.

World-class manufacturing center and global service network Advanced technology turbocharger The turbocharger for the 7FDS diesel is designed with GE s proven aircraft engine technology. Due to its critical nature, this component which is subject to severe thermal stresses is manufactured in-house to assure quality and reliability. On every 7FDS unit the turbocharger is properly matched to the engine for efficiency, performance, and mechanical packaging and driven by a single exhaust to provide higher mission reliability. GE Transportation s engine facility in Grove City, USA. As the largest manufacturer of medium speed diesel engines in the world with more than 15,000 medium-speed diesel engines currently High efficiency turbocharger based on GE s proven aircraft engine technology. in operation GE Transportation has the expertise and proven technology to provide customers with dependable power that can meet your exact needs. In addition to our world-class manufacturing center in Grove City, Pennsylvania, GE maintains a global network of field service offices and fully-equipped Service Centers that provide a full range of services including: Packaging Installation and commissioning Spare parts and service support during operation These comprehensive offerings combined with our commitment to reduce the turn times of Service Centers and outages result in substantial life cycle cost savings. Innovative emissions and control technologies GE continually develops innovative technologies to meet the evolving needs of our customers. As leaders in emissions technology, our diesel engines meet the latest emissions requirements including MARPOL, EPA Tier I and EPA Marine 2007 Tier II providing our 7FDS engines with NOx emission levels below 8.6 grams per horsepower-hour. Our PowerStarTM controller (available with multiple customized protection options) houses the electronic governor unit, speed reference 12 cylinder GE 7FDS diesel engine. and load control protecting the engine against overspeed, overload, low oil and pressure, and positive crank pressure. To assure optimal engine operation and reduce fuel consumption, this unit also determines the amount and timing of fuel injected into each cylinder. Unenclosed diesel generator set.

Built-in portability Available in a fully enclosed design, GE s medium speed generator sets can be relocated to where you need power the most. These 1.2 to GENERATOR SET SPECIFICATIONS MODEL 16GE7FDS 12GE7FDS 8GE7FDS Power (continuous) 50 Hz / 1000 rpm 2,800 kwe 2,100 kwe 1,400 kwe 3 MW self-contained portable units are equipped with generator switchgear, auxiliary load transformer, radiators, exhaust silencer, an Power (continuous) 60 Hz / 900 rpm 2,500 kwe 1,890 kwe 1,260 kwe integral heavy-duty air filtration system and gasketed doors to enhance serviceability and operation of equipment. For added mobility, Power (standby) 50 Hz / 1000 rpm max 3,080 kwe max 2,300 kwe max 1,535 kwe the main enclosure can be transported on a low-boy trailer. Power (standby) 60 Hz / 900 rpm max 2,770 kwe max 2,080 kwe max 1,380 kwe Fuel Consumption 900 rpm (lbs/hphr)* 0.307 0.309 0.318 Fuel Consumption 1,000 rpm (lbs/hphr)* 0.309 0.311 0.319 Weight kg (with enclosure) est. 70,000 60,000 50,000 Length mm (in) 14,000 (551) 13,000 (512) 12,000 (472) Height mm (in) Width mm (in) * (ISO 3046 +5% tolerance) Type Cylinders 16 12 8 Aspiration Bore mm (in) Stroke mm (in) Displacement L (cu. in) Compression Ratio Cooling System Lube Oil System Capacity L (gal.) 1,136 (300) 908 (240) 606 (160) ENGINE ALTERNATOR Enclosed diesel generator set. Quick-installation diesel power that can grow with your needs To allow rapid installation which requires only 5 steps for most applications GE s diesel-powered generator sets contain all neces- Voltage (kv) Any Generation Value Connection Wye Insulation Class F (H optional) Specification NEMA MG-1, IEEE Type Brushless, Revolving Field, Solid-State Exciter Construction Doubling Bearing, Flexible Coupled PERFORMANCE Governor Regulation Class ISO 8528 Class G 2 Steady State Voltage Regulation Less Than 0.5% Random Voltage Regulation Less Than +/- 0.5% Frequency Droop Less Than 5% Isochronous Steady State Frequency Droop Less Than 0.5% sary equipment for power generation. With a flexible design for easy installation and commissioning, they can be configured to operate in just about any application or environment. If more power is needed, additional units can be tied together by simply tuning a communication link to the master generator set, and then configuring the system via a touch display screen. GE s 7FDS engines for lower maintenance and operating costs Whether it s an 8, 12, or 16 cylinder reciprocating engine, GE s 7FDS diesel generator sets help lower the life-cycle costs associated with fuel consumption while allowing less mechanical wear on parts. Compared to high-speed diesels, GE s medium-speed diesels offer significantly longer times between overhauls, and between scheduled outages, and are 25% cheaper to operate on a per kilowatt-hour basis. For more information on 7FDS diesel engines, contact your GE sales representative or visit us online at www.ge.com/transportation.