STANDARD EQUIPMENT Alternator, 0 Ampere, 4V Anti-slip plates Auto-decel Automatic engine warm-up system atteries, 110 Ah/ x 1V oom holding valve Corrosion resistor Counterweight, 90kg 0,330lb Dry type air cleaner, double element Electric horn Engine, Komatsu SAAD1E- Engine overheat prevention system OPTIONAL EQUIPMENT Fan guard structure Fuel pre-filter (with water separator) Hydraulic track adjusters (each side) Multi-function color monitor Power maximizing system PPC hydraulic control system Radiator & oil cooler dust proof net Rear reflector Rear view mirror (RH, LH) ROPS cab (ISO 111-) Seat belt, retractable Track guiding guard, center section Track roller PC400-, each side PC400LC-, each side Track shoe PC400-, 00 mm 4" triple grouser PC400LC-, 00 mm " triple grouser Travel alarm Two-mode settings for boom Working light, (boom and RH) Working mode selection system PC400- PC400LC- FLYWHEEL HORSEPOWER Gross: 0 kw 3 HP @ 1900 rpm Net: kw 34 HP @ 1900 rpm OPERATING WEIGHT PC400-: 4140 490 kg 9,00 93,90 lb PC400LC-: 490 4300 kg 93,30 9,40 lb PC 400 Air conditioner with defroster, hot & cool box Alternator, 0 ampere, 4 V Arms 400 mm '10" arm assembly 900 mm 9'" arm assembly 330 mm 11'1" arm assembly 4000 mm 13'1" arm assembly 400 mm 1'9" arm assembly atteries, 140 Ah/ x 1 V olt-on top guard, (Operator Protective Guards level (OPG)) oom, 00 mm 3'" SPECIAL PURPOSE UCKET Ripper bucket for hard and rock ground Capacity SAE heaped 1.1 m 3 1.44 yd 3 CECE heaped 1.0 m 3 1.31 yd 3 Width 10 mm 49." Single-shank ripper is recommended for rock-digging and crushing, hard soil digging, pavement removal works, etc. www.komatsu.com Cab accessories Rain visor Sun visor Cab front guard Full height guard Half height guard Heater with defroster Long lubricating intervals for implement bushings Rear view mirror (rear and sidewise) Rear view monitoring system Seat, suspension Seat, suspension with heater Service valve Shoes, triple grouser shoes PC400-00 mm ", 00 mm 31." PC400LC- 00 mm 4", 00 mm 31." Track roller guards (full length) Track frame undercover Variable track gauge Working lights ( on cab) Printed in Japan 0103 IP.As Photo may include optional equipment. CEN003-0 Materials and specifications are subject to change without notice. is a trademark of Komatsu Ltd. Japan.
PC400-0 PC400- H YDRAULIC E XCAVATOR WALK-AROUND Productivity Features High Production and Low Fuel Consumption High power, working performance and fuel efficiency improve production and fuel costs. Excellent Machine Stability Large counterweight offers superior machine stability and balance. Large Digging Force Pressing the Power Max function button temporarily increases the digging force %. Two-mode Setting for oom Switch selection allows either powerful digging or smooth boom operation. See page. Large TFT LCD Monitor Easy-to-see and use " large multi-function color monitor Can be displayed in 1 languages for global support. TFT : Thin Film Transistor LCD : Liquid Crystal Display See page. Easy Maintenance Long replacement interval of engine oil, engine oil filter, hydraulic oil and hydraulic filter. Equipped with fuel pre-filter as standard (with water separator) Side-by-side radiator and oil cooler configuration enables independent removal and installation of those two components. Equipped with the EMMS monitoring system. Easy access to engine oil filter and fuel drain valve Large fuel tank capacity High pressure in-line filter See page 9. Ecology and Economy Features Low emission engine A powerful turbocharged and air to air aftercooled Komatsu SAAD1E- engine provides kw 34 HP. This engine is EPA Tier 3 and EU Stage 3A emissions certified, without sacrificing power or machine productivity. Economy mode saves fuel consumption. Low operation noise See pages 4 and. Large Comfortable Cab Low-noise cab Low vibration with cab damper mounting Highly pressurized cab with optional air conditioner Operator seat and console with armrest that enables operations in the appropriate operational posture. See page. HORSEPOWER Gross: 0 kw 3 HP @ 1900 rpm Net: kw 34 HP @ 1900 rpm OPERATING WEIGHT PC400-: 4140 490 kg 9,00 93,90 lb PC400LC-: 490 4300 kg 93,30 9,40 lb UCKET CAPACITY 1.30.0 m 3 1.0. yd 3 Safety Design ROPS cab (ISO 111-) Anti-slip plates for safe work on machine Rear view monitoring system for easy checking behind the machine (optional) See page. Variable Track Gauge (optional) Greatly increases lateral stability Compliant with transportation regulations See page. Photo may include optional equipment. 3
PC400- H YDRAULIC E XCAVATOR PRODUCTIVITY & ECOLOGY FEATURES PC400-0 Komatsu Technology Seven-inch TFT liquid crystal display Working Modes Selectable Two established work modes are further improved. Large Digging Force With the one-touch Power Max. function digging force has Hydraulic control valve Hydraulic system controller Main pump P mode Power or work priority mode has low fuel consumption, but fast equipment speed and maximum production and power are maintained. been further increased. (. seconds of operation) Maximum arm crowd force (ISO): 00 kn (0.4t) 14 kn (1.t) (with Power Max.) Maximum bucket digging force (ISO): kn (.1t) kn (.0t) (with Power Max.) % UP % UP *Measured with Power Max function, 330 mm 11'1" arm and ISO rating Komatsu develops and produces all major components, such as engines, electronics and hydraulic components, in house. With this Komatsu Technology, and adding customer feedback, Komatsu is achieving great advancements in technology. E mode Economy or Fuel priority E E mode fuel priority mode Work priority further reduces fuel P P mode consumption, but maintains the P-mode-like working equipment speed for light duty work. You can select Power or Economy modes using a one-touch operation on the monitor panel depending on workloads. Variable Track Gauge (optional) Lateral stability is significantly improved when operating with the gauge extended. Lateral stability is increased by 30% (compared with the fixed gauge version). With trackframes retracted, overall width complies with many local transportation regulations. To achieve both high levels of productivity and economical performance, Komatsu has developed the main components with a total control system. The result is a new generation of high performance and environment friendly excavators. Environment-friendly Clean Engine Electronic control unit for engine The PC400- gets its exceptional power and work capacity from a Komatsu SAAD1E- engine. Output is kw 34 HP, providing increased hydraulic power and improved fuel efficiency. Engine Heavy duty HPCR (High Pressure Common Rail) system Electronically controlled cooled EGR system Eco-gauge that Assists Energy-saving Operations Equipped with the Eco-gauge that can be recognized at a glance on the right of the multi-function color monitor for environment-friendly energy-saving operations. Allows focus on operation in the green range with reduced CO emissions and efficient fuel consumption. Eco-gauge Smooth Loading Operation Two return hoses improve hydraulic performance. In the arm out function, a portion of the oil is returned directly to the tank providing smooth operation. Return hoses Komatsu SAAD1E- engine is EPA Tier 3 and EU Stage 3A emissions certified with NOx emission reduced by 40%. The SAAD1E- engine adopts the electronically controlled Heavy Duty HPCR* fuel injection system and cooled EGR system with electronically controlled bypass-assist type venturi. *HPCR : High Pressure Common Rail Idling Caution To prevent unnecessary fuel consumption, an idling caution is displayed on the monitor, if the engine idles for minutes or more. Two-mode Setting for oom Smooth mode provides easy operation for gathering blasted rock or scraping down operation. When maximum digging force is needed, switch to Power mode for more effective excavating. Smooth mode Power mode Low Operation Noise Enables a low noise operation using the low-noise engine and methods to cut noise at source. Ambient noise meets the EU Stage noise regulation. Excellent Machine Stability Large counterweight offers superior machine stability and balance. oom floats upward, reducing lifting of machine front. This facilitates gathering blasted rock and scraping down operations. oom pushing force is increased, ditch digging and box digging operation on hard ground are improved. 4
PC400- H YDRAULIC E XCAVATOR WORKING ENVIRONMENT PC400-0 Safety Features ROPS Cab The machine is equipped with a ROPS cab that conforms to ISO 111- for excavators as standard equipment. The ROPS cab has high shock-absorption performance, featuring excellent durability and impact strength. It also satisfies the requirements of ISO OPG top guard level 1 for falling objects. Combined with the retractable seat belt, The ROPS cab protects the operator in case of tipping over and against falling objects. Lock Lever Locks the hydraulic pressure to prevent unintentional movement. Neutral start function only allows machine to be started in lock position. Pump/Engine Room Partition Pump/engine room partition prevents oil from spraying onto the engine if a hydraulic hose should fail. Low Cab Noise The newly-designed cab is highly rigid and has excellent sound absorption ability. Thorough improvement of noise source reduction and use of low noise engine, hydraulic equipment, and air conditioner allows this machine to generate a low level of noise. Low Vibration with Cab Damper Mounting PC400- uses viscous damper mounting for cab that incorporates longer stroke and the addition of a spring. The new cab damper mounting combined with high rigidity deck aids vibration reduction at operator seat. Wide Newly-designed Cab Newly-designed wide spacious cab includes seat with reclining backrest. The seat height and longitudinal inclination are easily adjusted using a pullup lever. You can set the appropriate operational posture of armrest together with the console. Reclining the seat further enables you to place it into the fully flat state with the headrest attached. Automatic Air Conditioner (optional) Enables you to easily and precisely set cab atmosphere with the instruments on the large LCD. The bi-level control function keeps the operator's head and feet cool and warm respectively. This improved air flow function keeps the inside of the cab comfortable throughout the year. Defroster function keeps front glass clear. Anti-slip Plates Highly durable anti-slip plates maintain superior traction performance for the long term. Thermal and Fan Guards Thermal and fan guards are placed around hightemperature parts of the engine and fan drive. Large Serrated Steps Large Handrail Rubber Silicon Oil Spring Pressurized Cab Optional air conditioner, air filter and a higher internal air pressure (+.0 mm Aq +0."Aq) prevent external dust from entering the cab.
PC400- H YDRAULIC E XCAVATOR PC400-0 MAINTENANCE FEATURES Large LCD Color Monitor Easy Maintenance Large Multi-lingual LCD Monitor A large user-friendly color monitor enables safe, accurate and smooth work. Improved screen visibility is achieved by the use of TFT liquid crystal display that can easily be read at various angles and lighting conditions. Simple and easy to operate switches. Function keys facilitate multi-function operations. Displays data in 1 languages to globally support operators around the world. Indicators 1 3 Travel speed 4 Engine water temperature gauge 1 3 Auto-decelerator Working mode asic operation switches Auto-decelerator Working mode selector Traveling selector Hydraulic oil temperature gauge Fuel gauge Eco-gauge Function switches menu 4 uzzer cancel Wiper Windshield washer asic operation switches 4 1 3 4 1 3 Function switches Air conditioner operation switches Easy Access to Engine Oil Filter and Fuel Drain Valve Engine oil dipstick and fill, and fuel filter are mounted on same side to improve accessibility. Fuel drain valve are remotely mounted to improve accessibility. Fuel Drain Valve Equipped with Fuel Pre-filter (with Water Separator) Removes water and contaminants in the fuel to prevent fuel problems. Large Capacity Air Cleaner Large capacity air cleaner is comparable to that of larger machines. The larger air cleaner can extend air cleaner life during long-term operation and prevents early clogging and resulting power decrease. Reliability is improved by a new seal design. Long-life Oil, Filter Uses high-performance filtering materials and long-life oil. Extends the oil and filter replacement interval. Engine oil & Engine oil filter Hydraulic oil Hydraulic oil filter Hydraulic oil filter (Eco-white element) every 00 hours every 000 hours every 1000 hours Long Work Equipment Greasing Interval (optional) High quality MRC bushings and resin shims are optionally available for work equipment pins excluding bucket, extending greasing interval to 00 hours. Large Fuel Tank Capacity Large fuel tank capacity extends operating hours before refueling. Fuel tank is treated for rust prevention and improved corrosion resistance. High Pressure In-line Filter Mode Selection The multi-function color monitor has Power mode, Economy mode, Lifting mode, reaker mode and Attachment mode. Working Mode Application Advantage P Power mode Maximum production/power Fast cycle time E Economy mode Excellent fuel economy L Lifting mode Hydraulic pressure is increased by % EMMS (Equipment Management Monitoring System) Monitor Function Controller monitors engine oil level, coolant temperature, battery charge and air clogging, etc. If controller finds any abnormality, it is displayed on the LCD. In-line filters are provided at outlet port (pressure side) of each pump to protect hydraulic system contamination. In-line filters ATT Lifting Mode reaker operation Attachment mode Optimum engine rpm, hydraulic flow Optimum engine rpm, hydraulic flow, way When the Lifting mode is selected, lifting capacity is increased % by raising hydraulic pressure. Maintenance Function Monitor informs replacement time of oil and filters on LCD when the replacement interval is reached. Trouble Data Memory Function Easy Radiator Cleaning Since radiator and oil cooler are arranged side-by-side, it is easy to clean, remove and install them. Monitor stores abnormalities for effective troubleshooting. Photo may include optional equipment. 9
PC400- H YDRAULIC E XCAVATOR SPECIFICATIONS DIMENSIONS PC400-0 ENGINE Model............................. Komatsu SAAD1E- Type.................... Water-cooled, 4-cycle, direct injection Aspiration.............. Turbocharged, aftercooled, cooled EGR Number of cylinders.................................... ore...................................... 1 mm 4.9" Stroke..................................... 10 mm.91" Piston displacement......................... 11.04 ltr 4 in 3 Horsepower: SAE J199........................ Gross 0 kw 3 HP ISO 949 / SAE J1349................. Net kw 34 HP Rated rpm................................... 1900 rpm Fan drive type................................. Mechanical Governor........................ All-speed control, electronic EPA Tier 3 and EU Stage 3A emissions certified. HYDRAULICS Type.. HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves Number of selectable working modes....................... 4 Main pump: Type..................... Variable displacement piston type Pumps for........ oom, arm, bucket, swing, and travel circuits Maximum flow................. 90 ltr/min 1 U.S. gal/min Supply for control circuit................. Self-reducing valve Hydraulic motors: Travel.............. x axial piston motors with parking brake Swing.......... 1 x axial piston motor with swing holding brake Relief valve setting: Implement circuits............ 3.3 MPa 30 kgf/cm,400 psi Travel circuit................ 3.3 MPa 30 kgf/cm,400 psi Swing circuit.................9 MPa kgf/cm 4,00 psi Pilot circuit..................... 3. MPa 33 kgf/cm 40 psi Hydraulic cylinders: (Number of cylinders bore x stroke x rod diameter) oom..... 10 mm x 10 mm x 110 mm.3" x 1." x 4.3" Arm............................. except.4 m '10" arm 1 1 mm x 10 mm x 10 mm.3" x 1." x 4." Arm................................. for.4 m '10" arm 1 1 mm x 190 mm x 10 mm.3" x." x 4." ucket...... 1 10 mm x 10 mm x 110 mm.3" x 0" x 4.3" DRIVES AND RAKES Steering control....................... Two levers with pedals Drive method.................................. Hydrostatic Maximum drawbar pull.............. 330 kn 3300 kgf 4,300 lb Gradeability.................................... 0%, 3 Maximum travel speed: High.................. km/h 3.4 mph (Auto-Shift) Mid.................. 4.0 km/h. mph (Auto-Shift) Low................. 3.0 km/h 1.9 mph Service brake............................... Hydraulic lock Parking brake......................... Mechanical disc brake SWING SYSTEM Drive method.................................. Hydrostatic Swing reduction............................. Planetary gear Swing circle lubrication....................... Grease-bathed Service brake............................... Hydraulic lock Holding brake/swing lock................ Mechanical disc brake Swing speed..................................... 9.1 rpm UNDERCARRIAGE Center frame.................................... X-frame Track frame.................................. ox-section Seal of track................................. Sealed track Track adjuster.................................. Hydraulic Number of shoes (each side): PC400-.......................................... 4 PC400LC-........................................ 49 Number of carrier rollers......................... each side Number of track rollers (each side): PC400-........................................... PC400LC-......................................... COOLANT AND LURICANT CAPACITY (REFILLING) Fuel tank.............................. 0 ltr 1 U.S. gal Coolant............................... 3.0 ltr 9. U.S. gal Engine................................ 3.0 ltr 9. U.S. gal Final drive, each side..................... 10. ltr. U.S. gal Swing drive............................ 0.0 ltr.3 U.S. gal Hydraulic tank.......................... 4 ltr. U.S. gal OPERATING WEIGHT (APPROXIMATE) Operating weight including 00 mm 3'" one-piece boom, 330 mm 11'1" arm, SAE heaped 1.9 m 3.49 yd 3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment. PC400- PC400LC- Operating Ground Operating Ground Shoes Weight Pressure Weight Pressure 00 mm 4140 kg 3." 9,00 lb 00 mm 410 kg." 9,90 lb 00 mm 490 kg 31." 93,90 lb. kpa 490 kg 3.3 kpa 0.9 kgf/cm 0. kgf/cm 11.3 psi 93,30 lb 10. psi.3 kpa 440 kg 3. kpa 0.9 kgf/cm 0. kgf/cm 9. psi 94,0 lb 9.4 psi 9. kpa 4300 kg. kpa 0.1 kgf/cm 0. kgf/cm.3 psi 9,40 lb.1 psi Arm Length 400 mm '10" 900 mm 9'" 330 mm 11'1" 4000 mm 13'1" A Overall length 1190 mm 39'1" 1199 mm 39'4" 11940 mm 39'" 1190 mm 39'" Length on ground (transport): PC400-30 mm '0" 90 mm 3'11" 40 mm 1'" 14 mm 0'" PC400LC- 410 mm '" 4 mm 4'" 0 mm '0" 330 mm 0'9" C Overall height (to top of boom)* 30 mm 1'" 34 mm 1'3" 33 mm 11'11" 3 mm 1'9" Model PC400- PC400LC- D Overall width 3430 mm 11'3" 3440 mm 11'3" E Overall height (to top of cab)* 3 mm 10'9" 3 mm 10'9" F Ground clearance, counterweight 130 mm 4'4" 130 mm 4'4" G Ground clearance (minimum) mm 1'10" 0 mm 1'10" H Tail swing radius 34 mm 1'0" 34 mm 1'0" I Track length on ground 400 mm 13'" 430 mm 14'3" J Track length 0 mm 1'" 3 mm 1'" K Track gauge 40 mm 9'0" 40 mm 9'0" L Width of crawler 3340 mm 11'0" 3440 mm 11'3" M Shoe width 00 mm 4" 00 mm " N Grouser height 3 mm 1." 3 mm 1." O Machine cab height 90 mm 9'" 90 mm 9'" P Machine cab width** 3090 mm 10'" 3090 mm 10'" Q Distance, swing center to rear end 30 mm 11'10" 30 mm 11'10" * : Including grouser height **: Including handrail Arm Length 400 mm '10" 900 mm 9'" 330 mm 11'1" 4000 mm 13'1" A Max. digging height 10310 mm 33'10" 10 mm 33'9" 1091 mm 3'10" 110 mm 3'" Max. dumping height 00 mm 3'" 00 mm 3'3" mm 4'10" 1 mm '4" C Max. digging depth 4 mm '" 34 mm 4'1" 0 mm '" 44 mm '" D Max. vertical wall digging depth 30 mm 1'" 00 mm 1'" 0 mm '" mm 3'11" E Max. digging depth of cut for ' level 0 mm 1'10" 1 mm 3'" 0 mm '" 31 mm '3" F Max. digging reach 1100 mm 3'4" 1144 mm 3'" 10 mm 39'" 1 mm 41'3" G Max. digging reach 10 mm 3'" 1130 mm 3'10" 110 mm 3'9" 13 mm 40'" at ground level H Min. swing radius 43 mm 1'10" 410 mm 1'9" 43 mm 1'" 400 mm 1'9" ucket digging force 41 kn 40 kn 39 kn 39 kn at power max. 400 kgf/4,30 lb 400 kgf/4,010 lb 4400 kgf/3,90 lb 4400 kgf/3,90 lb Arm crowd force 41 kn 4 kn 0 kn 14 kn at power max. 400 kgf/4,30 lb 000 kgf/,10 lb 0900 kgf/4,00 lb 100 kgf/41,40 lb ucket digging force kn kn kn 0 kn at power max. 00 kgf/,10 lb 100 kgf/1,90 lb 000 kgf/1,30 lb 00 kgf/0,30 lb Arm crowd force 4 kn kn 14 kn 190 kn at power max. 900 kgf/,100 lb 00 kgf/,0 lb 100 kgf/4,00 lb 19400 kgf/4,0 lb ISO rating SAE rating WORKING RANGE ACKHOE UCKET, ARM, AND OOM COMINATION C* G A A P K D,L D C E ucket Capacity (heaped) Width Weight Number Arm Length of Teeth SAE, PCSA CECE Without Side Cutters With Side Cutters With Side Cutters.4 m '10".9 m 9'" 3.3 m 11'1" 4.0 m 13'1" 1.3 m 3 1.0 yd 3 1. m 3 1. yd 3 110 mm 44.1" 10 mm 0.0" 111 kg,40 lb 4 1. m 3.09 yd 3 1.4 m 3 1.3 yd 3 10 mm 0.0" 140 mm.9" 119 kg,40 lb 4 1.9 m 3.49 yd 3 1. m 3. yd 3 14 mm.1" 1 mm 4.0" 13 kg,990 lb **1.9 m 3.49 yd 3 1. m 3. yd 3 1 mm 4.0" 19 kg 4,330 lb X.0 m 3.9 yd 3 1. m 3.3 yd 3 1 mm 1." 11 mm." 1391 kg 3,00 lb **.1 m 3. yd 3 1.9 m 3.49 yd 3 14 mm." 03 kg 4,490 lb X. m 3. yd 3.0 m 3. yd 3 11 mm." *139 kg 3,00 lb X : General purpose use, density up to 1. ton/m 3 1. U.S. ton/yd 3 X: Not usable : General purpose use, density up to 1. ton/m 3 1. U.S. ton/yd 3 *: Without side cutters : Light duty work, density up to 1. ton/m 3 1.01 U.S. ton/yd 3 **: Quarry bucket (with side shroud) (m) 1 11 10 9 4 3 1 0-1 - -3-4 - - - - E* I J M -9 (m) 13 1 11 10 9 H,G 4 3 440 G F F H O N 1 0 G.L 10 11
LIFTING CAPACITY WITH LIFTING MODE A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach C PC400- Arm: 400 mm '10" ucket: 1.9 m 3.49 yd 3 SAE heaped Shoe: 00 mm 4 triple grouser.m *1100 kg 90 kg *1100 kg 40 kg 4' *4,400 lb 1,00 lb *4,300 lb 1,00 lb.0m 90 kg 40 kg *11400 kg 0 kg *1310 kg 100 kg 19' 1,300 lb 14,300 lb *,100 lb 1,00 lb *,900 lb,00 lb 4.m 0 kg 0 kg 0 kg 00 kg 110 kg 900 kg *110 kg 1130 kg 14' 1,900 lb 1,00 lb 19,300 lb 1,00 lb,00 lb 1,00 lb *33,400 lb,100 lb 3.0m 000 kg 0 kg 0 kg 00 kg 1140 kg 0 kg 140 kg 100 kg 9' 1,00 lb 11,00 lb 1,00 lb 1,400 lb,300 lb 1,00 lb 3,300 lb 3,00 lb 1.m 0 kg 100 kg 30 kg 40 kg 1110 kg 0 kg 10 kg 1010 kg 4' 1,300 lb 11,300 lb 1,400 lb 1,000 lb 4,00 lb 1,000 lb 3,000 lb,300 lb 0m 100 kg 0 kg 0 kg 300 kg 10900 kg 00 kg 10 kg 90 kg 0' 1,00 lb 11,00 lb 1,100 lb 11,00 lb 4,100 lb 1,00 lb 34,300 lb 1,00 lb -1.m 00 kg 00 kg 0 kg 300 kg 100 kg 000 kg 100 kg 900 kg *140 kg 100 kg -4' 19,400 lb 1,00 lb 1,100 lb 11,00 lb 3,900 lb 1,400 lb 34,00 lb 1,00 lb *40,00 lb 34,400 lb -3.0m 1030 kg 00 kg 1090 kg 100 kg *100 kg 990 kg *1910 kg 1000 kg *140 kg *140 kg -9',00 lb 14,00 lb 4,100 lb 1,00 lb *34,300 lb 1,900 lb *4,00 lb 3,00 lb *40,00 lb *40,00 lb -4.m *1000 kg 9000 kg *100 kg 100 kg *110 kg *110 kg -14' *3,100 lb 19,900 lb *,900 lb,00 lb *33,400 lb *33,400 lb PC400- Arm: 900 mm 9'" ucket: 1.9 m 3.49 yd 3 SAE heaped Shoe: 00 mm 4 triple grouser.m *1000 kg 00 kg *10100 kg 00 kg 4' *,00 lb 1,900 lb *,300 lb 1,00 lb.0m 900 kg 900 kg 0 kg 900 kg *100 kg 0 kg 19' 19,00 lb 13,000 lb 19,00 lb 13,000 lb *3,400 lb 1,00 lb 4.m 900 kg 10 kg 0 kg 00 kg *1100 kg 900 kg *1410 kg 11400 kg *10 kg 100 kg 14' 1,400 lb 11,400 lb 19,100 lb 1,00 lb *,00 lb 1,400 lb *31,00 lb,100 lb *40,900 lb 40,00 lb 3.0m 400 kg 40 kg 40 kg 00 kg 11400 kg 40 kg *1300 kg 100 kg 9' 1,300 lb 10,00 lb 1,00 lb 1,100 lb,100 lb 1,00 lb *3,900 lb 3,00 lb 1.m 0 kg 40 kg 00 kg 300 kg 11000 kg 100 kg 10 kg 10000 kg 4' 1,900 lb 10,00 lb 1,100 lb 11,00 lb 4,300 lb 1,00 lb 34,00 lb,100 lb 0m 400 kg 400 kg 00 kg 10 kg 100 kg 0 kg 130 kg 90 kg 0' 1,300 lb 10,400 lb 1,00 lb 11,300 lb 3,00 lb 1,100 lb 33,00 lb 1,300 lb -1.m 000 kg 100 kg 000 kg 100 kg 1000 kg 0 kg 100 kg 900 kg *,0 kg 10 kg -4' 1,00 lb 11,00 lb 1,00 lb 11,00 lb 3,400 lb 14,900 lb 33,00 lb 1,000 lb *49,900 lb 33,00 lb -3.0m 90 kg 900 kg 100 kg 00 kg 1300 kg 900 kg *030 kg 140 kg *00 kg *00 kg -9' 0,400 lb 13,000 lb 3,00 lb 1,000 lb 33,00 lb 1,00 lb *44,00 lb 34,100 lb *4,00 lb *4,00 lb -4.m *100 kg 00 kg *930 kg 00 kg *13300 kg 9900 kg *100 kg 10 kg *190 kg *190 kg -14' *3,00 lb 1,000 lb *0,00 lb 1,00 lb *9,300 lb 1,00 lb *3,00 lb 34,00 lb *43,400 lb *43,400 lb PC400- Arm: 330 mm 11'1" ucket: 1.9 m 3.49 yd 3 SAE heaped Shoe: 00 mm 4 triple grouser.m *00 kg 0 kg 4' *1,000 lb 13,00 lb.0m *00 kg 0 kg 900 kg 100 kg *1010 kg 00 kg 19' *1,000 lb 11,00 lb 0,000 lb 13,400 lb *,400 lb 1,00 lb 4.m *000 kg 400 kg 0 kg 900 kg *1100 kg 100 kg *1340 kg 110 kg 14' *1,400 lb 10,300 lb 19,00 lb 13,000 lb *4,00 lb 1,900 lb *9,00 lb,900 lb 3.0m 0 kg 430 kg 00 kg 0 kg 110 kg 00 kg *10 kg 11000 kg *100 kg 110 kg 9' 14,900 lb 9,00 lb 19,000 lb 1,00 lb,00 lb 1,900 lb *34,00 lb 4,00 lb *4,00 lb 3,00 lb 1.m 00 kg 40 kg 30 kg 40 kg 1100 kg 300 kg 1100 kg 10300 kg *190 kg 10 kg 4' 14,00 lb 9,400 lb 1,400 lb 1,000 lb 4,00 lb 1,100 lb 3,00 lb,00 lb *3,400 lb 34,900 lb 0m 0 kg 4300 kg 10 kg 0 kg 10900 kg 00 kg 100 kg 90 kg *1000 kg 130 kg 0' 14,900 lb 9,00 lb 1,000 lb 11,00 lb 4,100 lb 1,00 lb 34,400 lb 1,00 lb *3,00 lb 33,900 lb -1.m 00 kg 400 kg 00 kg 10 kg 100 kg 0 kg 130 kg 90 kg *,00 kg 130 kg -4' 1,900 lb 10,00 lb 1,00 lb 11,400 lb 3,00 lb 1,00 lb 33,900 lb 1,300 lb *0,100 lb 33,00 lb -3.0m 10 kg 0 kg 100 kg 00 kg 1000 kg 0 kg 1400 kg 900 kg *100 kg 100 kg *100 kg *100 kg -9' 1,000 lb 11,00 lb 1,900 lb 11,00 lb 3,00 lb 1,100 lb 33,900 lb 1,400 lb *4,000 lb 34,00 lb *41,100 lb *41,100 lb -4.m *90 kg 00 kg 100 kg 000 kg *1400 kg 9900 kg *10 kg 10 kg *3300 kg *3300 kg -14' *1,00 lb 14,400 lb 3,900 lb 1,00 lb *3,000 lb 1,00 lb *40,900 lb 34,900 lb *1,300 lb *1,300 lb -.0m *00 kg *00 kg *1010 kg *1010 kg *1330 kg *1330 kg -19' *19,00 lb *19,00 lb *,400 lb *,400 lb *9,400 lb *9,400 lb PC400- Arm: 4000 mm 13'1" ucket: 1. m 3.09 yd 3 SAE heaped Shoe: 00 mm 4 triple grouser A MAX 10. m 34 9.0 m 9. m 4'.0 m 19' 4. m 14' 3.0 m 9' Cf Cs.m *0 kg 00 kg *0 kg 30 kg 4' *1,900 lb 1,400 lb *1,00 lb 14,000 lb.0m *00 kg 400 kg *00 kg 0 kg 19' *1,00 lb 10,00 lb *19,400 lb 13,00 lb 4.m *000 kg 4300 kg 00 kg 440 kg 9000 kg 000 kg *1000 kg 300 kg 14' *13,00 lb 9,00 lb 1,000 lb 9,00 lb 19,00 lb 13,300 lb *3,100 lb 1,300 lb 3.0m 0 kg 4000 kg 0 kg 430 kg 00 kg 0 kg *1100 kg 0 kg *1400 kg 110 kg *00 kg 100 kg 9' 13,00 lb,00 lb 14,00 lb 9,00 lb 19,00 lb 1,00 lb *,000 lb 1,300 lb *3,00 lb 4,00 lb *4,00 lb 39,100 lb 1.m 100 kg 3900 kg 00 kg 400 kg 400 kg 00 kg 11300 kg 400 kg 10 kg 1040 kg *3300 kg 110 kg 4' 13,00 lb,00 lb 14,400 lb 9,00 lb 1,00 lb 1,100 lb,000 lb 1,300 lb 3,900 lb 3,100 lb *1,300 lb 3,00 lb 0m 00 kg 390 kg 400 kg 400 kg 00 kg 0 kg 1090 kg 00 kg 10 kg 9900 kg *040 kg 130 kg 0' 13,00 lb,00 lb 14,100 lb 9,000 lb 1,100 lb 11,00 lb 4,100 lb 1,00 lb 34,00 lb 1,900 lb *4,100 lb 33,00 lb -1.m 0 kg 410 kg 300 kg 4000 kg 00 kg 10 kg 1000 kg 0 kg 1300 kg 900 kg *30 kg 100 kg *1110 kg *1110 kg -4' 14,00 lb 9,00 lb 13,900 lb,00 lb 1,00 lb 11,300 lb 3,00 lb 1,100 lb 33,00 lb 1,00 lb *1,300 lb 33,00 lb *4,00 lb *4,00 lb -3.0m 300 kg 40 kg 000 kg 100 kg 1000 kg 0 kg 100 kg 900 kg *0 kg 110 kg *1900 kg *1900 kg -9' 1,100 lb 10,00 lb 1,00 lb 11,300 lb 3,400 lb 14,900 lb 33,00 lb 1,000 lb *0,400 lb 33,400 lb *4,400 lb *4,400 lb -4.m 0 kg 00 kg 1000 kg 0 kg 1300 kg 90 kg *000 kg 1400 kg *40 kg *40 kg -14' 19,300 lb 1,300 lb 3,00 lb 1,100 lb 33,00 lb 1,300 lb *44,00 lb 34,000 lb *4,00 lb *4,00 lb -.0m *910 kg 0 kg *0 kg 10 kg *10 kg 10000 kg *10 kg 10 kg *0300 kg *0300 kg -19' *0,100 lb 1,900 lb 1,100 lb 1,00 lb *,000 lb,000 lb *3,000 lb 34,00 lb *44,00 lb *44,00 lb *Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J109. Rated loads do not exceed % of hydraulic lift capacity or % of tipping load. 1
LIFTING CAPACITY WITH LIFTING MODE A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach C PC400LC- Arm: 400 mm '10" ucket: 1.9 m 3.49 yd 3 SAE heaped Shoe: 00 mm triple grouser.m *1100 kg 00 kg *1100 kg 00 kg 4' *4,400 lb 1,100 lb *4,300 lb 19,00 lb.0m *1000 kg 00 kg *11400 kg 0 kg *1310 kg 1400 kg 19' *3,900 lb 14,00 lb *,100 lb 1,00 lb *,900 lb,300 lb 4.m 900 kg 0 kg 10000 kg 000 kg *1300 kg 00 kg *110 kg 1100 kg 14' 1,00 lb 1,900 lb,100 lb 13,00 lb *,100 lb 1,000 lb *33,400 lb,00 lb 3.0m 900 kg 40 kg 900 kg 00 kg 1300 kg 00 kg *100 kg 11000 kg 9' 0,300 lb 1,000 lb 1,00 lb 1,00 lb 9,100 lb 1,00 lb *3,900 lb 4,300 lb 1.m 900 kg 300 kg 900 kg 0 kg 10 kg 00 kg *100 kg 1040 kg 4' 19,900 lb 11,00 lb 1,00 lb 1,400 lb,300 lb 1,00 lb *40,100 lb 3,100 lb 0m 9300 kg 40 kg 900 kg 0 kg 10 kg 300 kg 110 kg 1000 kg 0' 0,00 lb 1,000 lb 0,900 lb 1,00 lb,00 lb 1,100 lb 40,000 lb,00 lb -1.m 1010 kg 900 kg 900 kg 0 kg 10 kg 0 kg *1400 kg 1010 kg *140 kg 1100 kg -4',400 lb 13,000 lb 0,900 lb 1,00 lb,00 lb 1,000 lb *3,300 lb,400 lb *40,00 lb 3,00 lb -3.0m *1100 kg 90 kg *1100 kg 30 kg *100 kg 10300 kg *1910 kg 100 kg *140 kg *140 kg -9' *4,00 lb 1,300 lb *,00 lb 1,00 lb *34,300 lb,00 lb *4,00 lb 3,400 lb *40,00 lb *40,00 lb -4.m *1000 kg 9300 kg *100 kg 1000 kg *110 kg *110 kg -14' *3,100 lb 0,00 lb *,900 lb 3,400 lb *33,400 lb *33,400 lb PC400LC- Arm: 900 mm 9'" ucket: 1.9 m 3.49 yd 3 SAE heaped Shoe: 00 mm triple grouser.m *1000 kg 400 kg *10100 kg 0 kg 4' *,00 lb 1,400 lb *,300 lb 19,300 lb.0m *9900 kg 100 kg *900 kg 100 kg *100 kg 0 kg 19' *1,900 lb 13,00 lb *1,00 lb 13,400 lb *3,400 lb 1,00 lb 4.m 9100 kg 30 kg 990 kg 900 kg *1100 kg 10 kg *1410 kg 110 kg *10 kg *10 kg 14' 0,000 lb 11,00 lb,000 lb 13,100 lb *,00 lb 1,000 lb *31,00 lb,900 lb *40,900 lb *40,900 lb 3.0m 00 kg 490 kg 900 kg 00 kg *100 kg 00 kg *1300 kg 11000 kg 9' 1,00 lb 10,900 lb 1,400 lb 1,00 lb *,000 lb 1,000 lb *3,900 lb 4,00 lb 1.m 30 kg 400 kg 900 kg 00 kg 10 kg 30 kg *10 kg 1030 kg 4' 1,400 lb 10,00 lb 0,900 lb 1,100 lb,100 lb 1,300 lb *3,900 lb,00 lb 0m 0 kg 4900 kg 9300 kg 30 kg 140 kg 100 kg *1900 kg 10000 kg 0' 1,900 lb 10,00 lb 0,00 lb 11,00 lb,400 lb 1,00 lb *39,00 lb,000 lb -1.m 90 kg 300 kg 90 kg 300 kg 1300 kg 000 kg *140 kg 90 kg *0 kg 10 kg -4' 0,400 lb 11,00 lb 0,400 lb 11,00 lb,100 lb 1,400 lb *3,00 lb 1,00 lb *49,900 lb 34,00 lb -3.0m 1000 kg 10 kg 130 kg 00 kg *100 kg 990 kg *0,30 kg 1000 kg *00 kg *00 kg -9' 3,00 lb 13,00 lb,00 lb 1,00 lb *3,400 lb,000 lb *44,00 lb 3,00 lb *4,00 lb *4,00 lb -4.m *100 kg 90 kg *930 kg 300 kg *13300 kg 100 kg *100 kg 110 kg *190 kg *190 kg -14' *3,00 lb 1,00 lb *0,00 lg 1,100 lg *9,300 lb,00 lb *3,00 lb 3,00 lb *43,400 lb *43,400 lb PC400LC- Arm: 330 mm 11'1" ucket: 1.90 m 3.49 yd 3 SAE heaped Shoe: 00 mm triple grouser.m *00 kg 40 kg 4' *1,000 lb 14,00 lb.0m *00 kg 40 kg *9400 kg 300 kg *1010 kg 0 kg 19' *1,000 lb 1,000 lb *0,00 lb 13,900 lb *,400 lb 19,300 lb 4.m *000 kg 40 kg *9900 kg 100 kg *1100 kg 30 kg *1340 kg 100 kg 14' *1,400 lb 10,00 lb *1,00 lb 13,00 lb *4,00 lb 1,00 lb *9,00 lb,00 lb 3.0m *400 kg 40 kg 9900 kg 0 kg *1400 kg 90 kg *10 kg 11300 kg *100 kg 10 kg 9' *1,400 lb 10,000 lb 1,00 lb 1,900 lb *,400 lb 1,00 lb *34,00 lb,000 lb *4,00 lb 3,900 lb 1.m 0 kg 4400 kg 90 kg 0 kg 190 kg 0 kg *140 kg 100 kg *190 kg 130 kg 4' 1,900 lb 9,00 lb 1,00 lb 1,400 lb,00 lb 1,00 lb *3,00 lb 3,00 lb *3,400 lb 3,100 lb 0m 00 kg 400 kg 940 kg 40 kg 100 kg 300 kg *100 kg 1000 kg *1000 kg 10 kg 0' 1,00 lb 9,900 lb 0,00 lb 1,000 lb,00 lb 1,100 lb *39,00 lb,00 lb *3,00 lb 3,000 lb -1.m 30 kg 400 kg 930 kg 400 kg 140 kg 10 kg *1900 kg 10000 kg *00 kg 10 kg -4' 1,400 lb 10,00 lb 0,00 lb 11,900 lb,400 lb 1,00 lb *39,400 lb,100 lb *0,100 lb 34,900 lb -3.0m 940 kg 40 kg 930 kg 400 kg 140 kg 100 kg *100 kg 1000 kg *100 kg 1000 kg *100 kg *100 kg -9' 0,00 lb 1,000 lb 0,00 lb 11,900 lb,400 lb 1,00 lb *3,000 lb,100 lb *4,000 lb 3,300 lb *41100 lb *41,100 lb -4.m *90 kg 0 kg *1100 kg 300 kg *1400 kg 100 kg *10 kg 130 kg *3300 kg *3,300 kg -14' *1,00 lb 14,900 lb *4,400 lb 1,000 lb *3,000 lb,00 lb *40,900 lb 3,100 lb *1,300 lb *1,300 lb -.0m *00 kg *00 kg *1010 kg *1010 kg *1330 kg *1330 kg -19' *19,00 lb *19,00 lb *,400 lb *,400 lb *9,400 lb *9,400 lb PC400LC- Arm: 4000 mm 13'1" ucket: 1. m 3.09 yd 3 SAE heaped Shoe: 00 mm triple grouser A MAX 10. m 34 9.0 m 9. m 4'.0 m 19' 4. m 14' 3.0 m 9'.m *0 kg 00 kg *0 kg 0 kg 4' *1,900 lb 1,00 lb *1,00 lb 14,400 lb.0m *00 kg 490 kg *00 kg 40 kg 19' *1,00 lb 11,000 lb *19,400 lb 14,00 lb 4.m *000 kg 440 kg 00 kg 40 kg *930 kg 0 kg *1000 kg 0 kg 14' *13,00 lb 9,00 lb 1,300 lb 10,00 lb *0,00 lb 13,00 lb *3,100 lb 1,900 lb 3.0m *300 kg 410 kg 00 kg 400 kg 10000 kg 90 kg *1100 kg 100 kg *1400 kg 110 kg *00 kg 1,00 kg 9' *13,900 lb 9,00 lb 1,900 lb 9,900 lb,000 lb 13,100 lb *,000 lb 1,00 lb *3,00 lb,00 lb *4,00 lb 40,00 lb 1.m *0 kg 400 kg 00 kg 430 kg 900 kg 00 kg *190 kg 0 kg *10 kg 1000 kg *3,300 kg 10 kg 4' *1,100 lb,900 lb 1,00 lb 9,00 lb 1,400 lb 1,00 lb *,00 lb 1,900 lb *3,900 lb 3,00 lb *1,300 lb 3,00 lb 0m 00 kg 4100 kg 400 kg 40 kg 940 kg 00 kg 10 kg 300 kg *100 kg 100 kg *040 kg 10 kg 0' 1,00 lb 9,000 lb 1,300 lb 9,300 lb 0,900 lb 1,100 lb,900 lb 1,100 lb *39,00 lb,00 lb *4,100 lb 3,000 lb -1.m 00 kg 430 kg 30 kg 400 kg 9300 kg 30 kg 1400 kg 100 kg 10 kg 990 kg *30 kg 100 kg *1110 kg *1110 kg -4' 1,00 lb 9,00 lb 1,00 lb 9,00 lb 0,00 lb 11,00 lb,400 lb 1,00 lb 39,400 lb 1,900 lb *1,300 lb 34,400 lb *4,00 lb *4,00 lb -3.0m 40 kg 40 kg 9300 kg 300 kg 1300 kg 000 kg *10 kg 90 kg *0 kg 10 kg *1900 kg *1900 kg -9' 1,00 lb 10,00 lb 0,00 lb 11,00 lb,00 lb 1,00 lb *3,100 lb 1,00 lb *0,400 lb 34,00 lb *4,400 lb *4,400 lb -4.m *90 kg 00 kg *100 kg 100 kg *10 kg 10000 kg *0,00 kg 190 kg *40 kg *40 kg -14' *1,100 lb 1,00 lb *,00 lb 1,00 lb *34,300 lb,000 lb *44,00 lb 3,100 lb *4,00 lb *4,00 lb -.0m *910 kg 90 kg *0 kg 400 kg *10 kg 1030 kg *10 kg *10 kg *0300 kg *0300 kg -19' *0,100 lb 1,00 lb *1,100 lb 1,300 lb *,000 lb,00 lb *3,000 lb *3,000 lb *44,00 lb *44,00 lb *Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J109. Rated loads do not exceed % of hydraulic lift capacity or % of tipping load. 13