TM eries Flanged Ball Valves are designed to regulate the flow of hot water, chilled water, and % glycol solutions to the demand of a controller in Heating, Ventilating, and Air Conditioning (HVAC) systems.the valves come in sizes of 2-1/2,, and. The (ANI) Class 125/1 flanged valves come in both 2-way and -way configurations and are available in multiple Cv ratings. Bray offers the valve, linkage, and actuator assemblies for factory or field mounting with either spring return or non-spring return actuators. The TM is designed for electronic actuator operation to a maximum close-off pressure of psi and for temperature ranges 0 to 28 F. TM eries Flanged Characterized Ball Valves 2 Way and Way 2-1/2-07/02/15 Free pinning Lap Flange Features and Benefits Lap Flange Allows easy positioning and alignment with mating flanges Low Torque maller actuator and longer life Dimensionally table at High Temperatures Works in low pressure steam applications 5 Year Warranty Assurance of trouble free operation TM-1
TM - pecifications Technical pecifications ervice Valve Fluid Temperature Limits Valve Body Pressure/ Temperature Rating Maximum Close-Off Pressure Maximum Recommended Operating Pressure Drop Flow Characteristics Rangeability Water team Two-Way Three-Way Two-Way Three-Way Hot Water, Chilled Water, / Glycol olutions, and 25 psig (172 kpa) aturated team for HVAC ystems 0 to 28 F (-18 to 10 C) ANI Class 125/1 2 psi at -20 to F (29 to 8 C) 25psi at: 200 F (9 C) 218psi at: 28 F (10 C) 25 psig (172 kpa) aturated team for HVAC ystems psi (689 kpa) psi (5 kpa) 0 psi (207 kpa) for quiet service Equal Percentage Equal Percentage Flow Characteristics of In-line Port or Linear Percentage Flow Characteristics of Angle Port Greater than 0:1 Leakage Two/Three-Way 0.01% of Maximum Flow, Control Port, ANI/FCI 70-2, Class Three-Way 1% of Maximum Flow, Bypass Port End Connections Minimum Ambient Operating Temperature Maximum Ambient Operating Temperature Materials - F (-20 C) -0 F (-0 C) 122 F ( C) 11 F (55 C) Body Flanges Ball tem eats tem eals ANI Class 125 Flange D2-210/DC2-10 eries Non-pring Return Actuators D-180 eries pring Return Actuators D2-210/DC2-10 eries Non-pring Return Actuators D-180 eries pring Return Actuators Brass Ductile Iron 00 eries tainless teel 00 eries tainless teel Graphite Reinforced PTFE with EPDM O-Ring Backing EPDM O-Rings Flow Control Disk Amodel A-115H Polyphthalamide Resin Disclaimer - The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Bray office. Bray, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. TM-2
TM - 2-Way Exploded View Actuator Actuator Mounting Bracket Assembly ID Tag Nuts/Bolts Anti-Rotation Clip haft OilLite Bearing et crew Body ID Tag Brass Body Lap Flanges TM - Piping Diagrams 2-Way -Way COIL COIL A B RETURN A AB RETURN B UPPLY UPPLY TM-
TM - 2-Way Actuator election and Close-Off Charts 2-Way TM Actuator election/close-off (PI) Non-pring Return Actuator Models 2 VAC On/Off or Floating 2 VAC Modulating Control Input Wiring Connections TM 2-2-7 TM 2-2- TM 2-2- TM -2- TM -2- TM -2- TM -2- TM -2- TM -2- -Wire On/Off or Floating Modulating with Feedback Optional Auxiliary witches Enclosed Terminal trip Conduit ize - Flex(F)/NPT(N) Cable - tandard()/plenum(p) ize in. mm 65 80 7 0.7 D2-210 - For optional auxiliary switches, add -A to the end of the actuator part number. 1/2 N /8 F 1/2 N /8 F DC2-10-T DM2-210 DCM2-10 2-Way TM Actuator election/close-off (PI) pring Return Actuator Models Control Input Wiring Connections -Wire On/Off or Floating Modulating with Feedback Optional Auxiliary witches Conduit ize - Flex(F)/NPT(N) Cable - tandard()/plenum(p) ize in. mm TM 2-2-7 7 0.7 TM 2-2- 65 TM 2-2- TM -2- TM -2-80 TM -2- TM -2- TM -2- TM -2- - For optional auxiliary switches, add -A to the end of the actuator part number. 2 VAC On/Off or Floating /8 F D2-180-T 120 VAC On/Off 2 VAC Modulating /8 F /8 F D120-180 DM2-180 TM-
TM - -Way Actuator election and Close-Off Charts -Way TM Actuator election/close-off (PI) Non-pring Return Actuator Models 2 VAC On/Off or Floating 2 VAC Modulating Control Input Wiring Connections TM 2--7 TM 2-- TM 2-- TM -- TM -- TM -- TM -- TM -- TM -- -Wire On/Off or Floating Modulating with Feedback Optional Auxiliary witches Enclosed Terminal trip Conduit ize - Flex(F)/NPT(N) Cable - tandard()/plenum(p) ize in. mm 65 80 Cv* Kv 7 0.7 D2-210 - For optional auxiliary switches, add -A to the end of the actuator part number. - * Bypass Cv/Kv is 80% of the nominal service Cv. 1/2 N /8 F 1/2 N /8 F DC2-10-T DM2-210 DCM2-10 -Way TM Actuator election/close-off (PI) pring Return Actuator Models Control Input Wiring Connections -Wire On/Off or Floating Modulating with Feedback Optional Auxiliary witches Conduit ize - Flex(F)/NPT(N) Cable - tandard()/plenum(p) ize in. mm Cv* Kv TM 2--7 7 0.7 TM 2-- 65 TM 2-- TM -- TM -- 80 TM -- TM -- TM -- TM -- - For optional auxiliary switches, add -A to the end of the actuator part number. - * Bypass Cv/Kv is 80% of the nominal service Cv. 2 VAC On/Off or Floating /8 F D2-180-T 120 VAC On/Off 2 VAC Modulating /8 F /8 F D120-180 DM2-180 TM-5
TM - 2-Way Dimensions D E A B C 2-Way TM Dimensions TM 2-2-7 TM 2-2- TM 2-2- TM -2- TM -2- TM -2- TM -2- TM -2- TM -2- ize in.(mm) (65) (80) () 7 0.7 Bolt Hole Diameter 5. (19) 6.00 (152) 7. (191) - Allow a minimum of inches for actuator removal. - Weights are for valve bodies only. - Dimensions may vary depending on the actuator - Dimensions hown are based on largest actuator available for this series. Number of Bolt Holes 8 A B C D E Weight. (89).75 (95). (11) 5.71 (15) 6.10 (155) 6.89 (175) 11.2 (290) 12.20 (10) 1.77 () 2.05 (52.1) 2.9 (6.2).09 (75.5) lbs. 6 kg. 15 16 20 TM-6
TM - -Way Dimensions D E A G F B C -Way TM Dimensions TM 2--7 TM 2-- TM 2-- TM -- TM -- TM -- TM -- TM -- TM -- ize in.(mm) (65) (80) () 7 0.7 Bolt Hole Diameter 5. (19) 6.00 (152) 7. (191) - Allow a minimum of inches for actuator removal. - Weights are for valve bodies only. - Dimensions may vary depending on the actuator - Dimensions hown are based on largest actuator available for this series. Number of Bolt Holes 8 A B C D E F. (89).75 (95). (11) 5.71 (15) 6.10 (155) 6.89 (175) 11.2 (290) 12.20 (10) 1.77 () 2.05 (52.1) 2.9 (6.2).09 (75.5) 0.75 (19.1) 0.75 (19.1) 0.75 (19.1) G 5.87 (19) 6.26 (159) 7.05 (179) Weight lbs. kg. 20 9 22 62 28 TM-7
TM - Cv Pipe ize Correction Tables 2-Way TM Piping Geometry Chart (Adjusted Cv) TM 2-2-7 TM 2-2- TM 2-2- TM -2- TM -2- TM -2- TM -2- TM -2- TM -2- Valve ize in. mm 65 80 7 0.7 Pipe ize 5 6 7 7 72 115 109 7 115 11 169 162 200 189 116 175 172 -Way TM Piping Geometry Chart (Adjusted Cv) TM 2--7 TM 2-- TM 2-- TM -- TM -- TM -- TM -- TM -- TM -- Valve ize in. mm 65 80 7 0.7 Pipe ize 5 6 7 7 72 115 109 7 115 11 169 162 200 189 116 175 172 TM-8 Bray Controls Commercial Division 1788 West Road, uite 200A Houston, Texas 7701