Manual pneumatic operated valves for fixed installations, CO2 and inert gases B B0430 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 12 mm Material Valve body brass Inlet connection C = 25E EN 629-1 Outlet connection A = W 21,8 x 1/14 DIN 477 Dip tube connection G = M 16 x 1 Lever connection M 10 Burst disc p = has to be specified
B B0430 OPTIONS Safety pin Safety pin and chain Manual lever M 10 x 1 Cable lever M 12 Pyrotechnical release device Closing plug G 3/8 ORDERING When ordering please specify: number Burst disc pressure p Options Manual lever M 10 Cable lever M 12 G C A
Solenoid valves for fixed installations, CO2 B B0439 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 7 mm Discharge rateco2 45 kg / min Discharge rate Kv = 0,69, Cv = 80 Operating total discharge Material Valve body brass Inlet connection C = 25E EN 629-1 Outlet connection A = W 21,8 x 1/14 DIN 477 Dip tube connection G = M 10 x 0,75 Burst disc p = has to be specified Electrical specifications: Operating voltage 24 V DC Power consumption 10 Watts
B B0439 OPTIONS Operating: intermittent Special inlet Special outlet Operating voltage 12 V DC or 230 V DC Explosion / flame proof solenoid ORDERING When ordering please specify: number Burst disc pressure p Options
Solenoid valves for fixed CO2 installations, with integrated electronic contents control DIMES B ST B0439 15 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 7 mm Discharge rateco2 45 kg / min Discharge rate Kv = 0,69; Cv = 80 Operating total discharge, intermittent Electrodes outside diameter max 22 mm Material Valve body brass Inlet connection C = 25E EN 629-1 Outlet connection A = W 21,8 x 1/14 DIN 477 Burst disc p = has to be specified Electrical specifications: Operating voltage 24 V DC/ 12 V DC Power consumption 10 Watt Electronics Supply voltage 6 to 30 VDC Potential free output contacts 2 Max switching voltage 50 V ( non-inductive) Max contact rating 0,4 A Protection class IP 67 Max current consumption 8 ma
B B0439 15 OPTIONS Operating: intermittent Special inlet Special outlet Operating voltage 12 V DC or 230 V DC Explosion / flame proof solenoid Complete kit ( valve, cylinder, protection cap) Alarm box Calibration unit Corresponding connection cables Dimes simulator box ORDERING When ordering please specify: number Burst disc pressure p Options Release devices Inner cylinder length L
Solenoid valves for fixed installations, inert gases 200 bar B B0439 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 7 mm Discharge rate Kv = 0,69, Cv = 80 Operating total discharge Material Valve body brass Inlet connection C = 25E EN 629-1 Outlet connection A = W 21,8 x 1/14 DIN 477 Dip tube connection G = M 10 x 0,75 Electrical specifications: Operating voltage 24 V DC Power consumption 10 Watts
B B0439 OPTIONS Operating: intermittent Special inlet Special outlet Gauge Gauge with integrated pressure switch Pressure switch Connection with check valve Operating voltage 12 V DC or 230 V DC Explosion / flame proof solenoid Chemical gases, FM200, NOVEC etc... ORDERING When ordering please specify: number Options
Differential pressure valves for fixed installations, CO2 B B0480 0 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 12 mm Material Valve body brass Inlet connection C = 25E EN 629-1 Outlet connection A = W 21,8 x 1/14 DIN 477 Dip tube connection G = M 16 x 1 Release device connection B = M 42 x 1,5 Burst disc p = has to be specified
B B0480 0 OPTIONS Special inlet Special outlet ORDERING When ordering please specify: number Burst disc pressure p Options Release devices G C A RELEASE DEVICES Type Release device B04420065 B04420066 B04420076 B04425103 B04420100 Manual / pneumatic 20 bar Pneumatic 20 bar Pneu. double piston 10 bar Electromagnetic 0,5 A Manual release
Differential pressure valves for fixed CO2 installations with integrated electronic contents control DIMES B B0480 45 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 12 mm Electrodes diameter 22 mm Material Valve body brass Inlet connection C = 25E EN 629-1 Outlet connection A = W 21,8 x 1/14 DIN 477 Dip tube connection G = M 16 x 1 Release device connection B = M 42 x 1,5 Burst disc p = has to be specified Electronics Supply voltage 6 to 30 VDC Potential free output contacts 2 Max switching voltage 50 V ( non-inductive) Max contact rating 0,4 A Protection class IP 67 Max current consumption 8 ma
B B0480 45 OPTIONS Complete kit ( valve, cylinder, protection cap) Alarm box Calibration unit Corresponding connection cables Dimes simulator box ORDERING When ordering please specify: number Burst disc pressure p Options Release devices Inner cylinder length L RELEASE DEVICES Type Release device B04420065 Manual / pneumatic 20 bar B04420066 Pneumatic 20 bar B04420076 Pneu. double piston 10 bar B04425103 Electromagnetic 0,5 A B04420100 Manual release
Various cables for installation of electronic contents control DIMES B B0480 45 Temperature range - 20 C + 60 C Connector type 8 pole DIN45326, with screw locking Material Cable insulation connector PVC metal
B B0480 45 TYPES a. connector only (8pin). article nr: 029900084 b. 4 wire cable with 8 pins for single cylinder connection. article nr: 029900088 Modular system to connect multiple cylinders to 1 alarm box (possibility to connect more cables together to obtain the correct number) c. cable for serial cylinder connection with 4 pins. article nr: 029900089 d. cable for 2 cylinder serial connection. article nr: 029900079 e. cable for 3 cylinder serial connection. article nr: 029900080 f. cable for 4 cylinder serial connection. article nr: 029900081 g. cable for 8 cylinder serial connection. article nr: 029900082 h. end connector for serial cylinder connections. article nr: 029900083
Alarm box for electronic contents control DIMES B B0480 45 Battery buffered 12 hrs Alarm functions Flash ( red) Horn (105 dba) Changeover contact Supply 230VDC / 0.04A / 50Hz Max switching voltage 230 V Max contact rating 2 A Dimensions 17 x 9,5 x 17 cm Weight 1,4 kg Protection class IP 40
B B0480 45 230Vac Input Output Pressureswitch DIMES Relais Horn Ballvalve Flash
Calibration unit for electronic contents control DIMES B B0480 45 - Calibrating: Empty and Full - Adjusting: Alarm and Filling weight - Measuring: actual Contents (% and kg) - Testing: Switching Contacts Dimensions Weight Power supply Charger Batterytime DIMES-connection cable 21 x 11 x 4 cm 0,5 kg 4 x AA 1.2V NiMH (rechargeable batteries, Included) Included ca 30 hrs Included
CEODEUX B DIMES simulation box for calibration unit and alarm box B B0480 46 - Testing: Alarmbox functionality - Training: Control unit functions Dimensions Weight 6,5 x 10 x 6 cm 0,3 kg
Valves for fixed installations, inert gases 200 bar B B0480 1 Working pressure p max. 250 bar Temperature range -20 C- + 60 C Seat orifice size 12 mm Material Valve body brass Inlet connection C = 25E EN 629-1 Outlet connection A = W 21,8 x 1/14 DIN 477 Dip tube connection G = M 16 x 1 Release device connection B = M 42 x 1,5 Standard burst disc p = 270 bar
B B0480 1 OPTIONS Special inlet Special outlet Gauge Gauge with integrated pressure switch Pressure switch Special burst disc Chemical gases, FM200, NOVEC etc... ORDERING When ordering please specify: number Burst disc pressure p Options Release devices G C A RELEASE DEVICES Type Release device B04420065 B04420066 B04420076 B04425103 B04420100 Manual / pneumatic 20 bar Pneumatic 20 bar Pneu. double piston 10 bar Electromagnetic 0,5 A Manual release
Valves for fixed installations, inert gases 300 bar B B0480 2 Working pressure p max. 340 bar Temperature range - 20 C + 60 C Seat orifice size 12 mm Material Valve body brass Inlet connection C = 25E EN 629-1 Outlet connection A = W 21,8 x 1/14 DIN 477 Dip tube connection G = M 16 x 1 Release device connection B = M 42 x 1,5 Standard burst disc p = 450 bar
B B0480 2 OPTIONS Special inlet Special outlet Gauge Gauge with integrated pressure switch Pressure switch Special burst disc ORDERING When ordering please specify: number Burst disc pressure p Options Release devices G C A RELEASE DEVICES Type Release device B04420065 B04420066 B04420076 B04425103 B04420100 Manual / pneumatic 20 bar Pneumatic 20 bar Pneu. double piston 10 bar Electromagnetic 0,5 A Manual release
Check valve for function test B 0299 Thread connection : W21,8 x 1/14 Material : Brass Article number: 029900075
Valves for fixed installations 49mm for chemical gases B B0481 Working pressure p max. 140 bar Temperature range - 20 C + 60 C Seat orifice size 49 mm Material Valve body brass Inlet connection C = 3-12 UN Outlet connection A = 2 1 / 2-12 UN Burst disc p = has to be specified Gauge has to be specified
B B0481 OPTIONS Special inlet Special outlet Gauge Gauge with integrated pressure switch Pressure switch Special burst disc ORDERING When ordering, please specify: number or attribution Type of gas Connections Burst disc pressure p Thread for dip tube connection G Options RELEASE DEVICES Type Release device B04420065 Manual / pneumatic 20 bar B04420066 Pneumatic 20 bar B04420076 Pneu. double piston 10 bar B04425103 Electromagnetic 0,5 A B04420100 Manual release
Valves for fixed installations 33mm for chemical gases B B0482 Working pressure p max. 140 bar Temperature range - 20 C + 60 C Seat orifice size 33 mm Material Valve body brass Inlet connection C = 2 1 / 2-12 UN Outlet connection A = 1 7 / 8-12 UN Burst disc p = has to be specified Gauge has to be specified
B B0482 OPTIONS Special inlet Special outlet Gauge Gauge with integrated pressure switch Pressure switch Special burst disc ORDERING When ordering, please specify: number or attribution Type of gas Connections Burst disc pressure p Thread for dip tube connection G Options RELEASE DEVICES Type Release device B04420065 Manual / pneumatic 20 bar B04420066 Pneumatic 20 bar B04420076 Pneu. double piston 10 bar B04425103 Electromagnetic 0,5 A B04420100 Manual release
Manual release device for series B0480 B0481 B0482 B B0442
Manual, pneumatic release device for series B0480 B0481 B0482 B B0442 Connection B = M 42 x 1,5 Pneumatic connection E = G 1/8 Working pressure min: 20 bar for 300 bar systems p max = 340 bar 15 bar for CO2 and 200 bar systems p max = 250 bar 10 bar for systems p max = 150 bar E B
Pneumatic release device 20 bar for series B0480 B0481 B0482 B B0442 Connection B = M 42 x 1,5 Pneumatic connection E = G 1/8 Working pressure min: 20 bar for 300 bar systems p max = 340 bar 15 bar for CO2 and 200 bar systems p max = 250 bar 10 bar for systems p max = 150 bar E B
Pneumatic release device 10 bar for series B0480 B0481 B0482 B B0442 Connection B = M 42 x 1,5 Pneumatic connection E = G 1/8 Working pressure min: 10 bar for 300 bar systems p max = 360 bar 7,5 bar for CO2 and 200 bar systems p max = 250 bar 5 bar for systems p max = 150 bar
Bleed valve B 02973 Thread connection : G1/8 ( G3/8 optional) Material : Brass Article number: 029730019
Electromagnetic release device for series B0480 B0481 B0482 B B0442 Connection B = M 42 x 1,5 Nominal voltage 24 VDC Nominal current 0,5 A Class IP65
CEODEUX B Reset tool for electromagnetic actuator B 0230 Thread connection : M42x1,5 Material : Brass Article number: 023000064
Assembly pressure gauge, 40 mm B 02972 Gauge connection M = M 10 x 1 Indication range 0 360 bar Nominal size 40 mm
Assembly pressure gauge with integrated pressure switch, 50 mm B 02972 Gauge connection M = M10 x 1 Nominal size 50 mm Electrical Data: Contact pin and lug gold-plated Switch voltage 4,5 to 24 VDC/ VAC Switch current 5 ma to 100 ma Contact load max 3W Switch type contact above switch point Working Pressure 200 bar 300 bar Indication range 180-360 bar 270-400 bar Nominal switch point 180 bar 270 bar Setting increasing pressure max 185 bar 275 bar decreasing pressure min 160 bar 250 bar
Solenoid valve for fixed installations, Water, powder, FM200, Novec B B0701 Working pressure p max. 20 bar at 20 C Temperature range - 20 C + 60 C Seat orifice size 9.5 mm Operating total discharge Material Valve body Nickel plated brass Inlet connection C = M30x1,5 Outlet connection A = G1/4 Burst disc p = to be specified Electrical specifications: Operating voltage 24 V DC Power consumption 9 Watts 03-9- fixed
B B0701 OPTIONS Special inlet Special outlet ORDERING When ordering please specify: number Burst disc pressure p Options
Plastic protection cap for valves FireDeTec IHP/DHP, B0439 and others B B0620 Thread connection : W80 x 1/11 Material : Polyamid 6.6 (special impact stabilizing material) Color: Dark grey Dimensions : Ø 148 x 170 mm Weigth : 350 gr. Impact test : Approval acc. to EN 962 Max cylinder weight: 60kg Markings: EN 962 3 stars logo 60kg
B B0620
Steel protection cap B B0620 Thread connection : W80 x 1/11 Material : Steel Color: Dark grey RAL 7037 Dimensions : Ø176 x 215 mm Weigth : 3,6kg Impact test : Approval acc. to EN 962 Max cylinder weight: 150kg Markings: EN 962 3 stars logo 150kg
B B0620 ORDERING When ordering, please specify: number or attribution