Submersible heavy-duty permissible pumps for use in gassy mines or tunnels. Approved by MSA. Drainage pumps: Minex MSA Minette MSA Minor MSA Major MSA Master MSA Matador MSA Maxi MSA Sludge pumps: Salvador MSA Sandy MSA 6 z
Translating user requirements into product features After some 5 years of designing and manufacturing submersible electrical dewatering pumps and listening to the customers, Grindex now offers a completely new generation of permissible drainage and sludge pumps approved by MSA. The nine new pumps in the range have an output of 2-58 P and cover applications requiring MSA approved permissible pumps in mining and tunneling where explosive or gassy environments might appear. The new pumps are designed to dramatically reduce operational costs. Air valve cools the pump should it run dry MSA-approved pumps for use in gassy mines or tunnels Wear protector system provides better wear resistance Checking avoid costly repairs Easy maintenance service one, service all Easy to service lasting performance
This is what makes our pumps unique 1 1 2 2 4 5 3 4 5 6 7 3 8 9 1 11 12 MIEX - MATADOR SALVADOR - SADY 1 Air valve Cools the pump should it run dry 2 Outer casing in corrugated stainless steel andles rough treatment 3 External oil plug Easier to check and change oil 4 Inspection chamber Provides early indication of seal problem 5 Cartridge seal Pre-assembled, faster and easier to mount 6 Drainage: Seal Saver system Reduces seal wear 7 Drainage: Single adjustment screw Easy to adjust the impeller for optimal performance 8 Drainage: Closed impeller Unique closed impeller design with high efficiency 9 Drainage: Wear Protector system Provides better wear resistance 1 Drainage: Rubber shock absorbers Gives superior impact protection 11 Sludge: Vortex impeller Clog resistant 12 Sludge: Polyurethane lined pump housing Provides better wear resistance
DRAIAGE PUMPS: MIEX MSA MIOR MSA MIEX MSA 3-phase Discharge connection 2 1.9 P (1.4 kw) 1.8 kw 33 RPM Rated current at 46 V 2.6 A Rated current at 575 V 2.1 A (ft) 6 5 4 3 2 1 5 1 15 2 Q (gpm) 19.5 Ø 7.7 Ø 1.1 Ø.3 47 lbs MIETTE MSA 3-phase (ft) 8 Discharge connection 3 7 3.5 P (2.6 kw) 6 5 3.1 kw 4 341 RPM 3 2 Rated current at 46 V 4.4 A 1 Rated current at 575 V 3.5 A 5 1 15 2 25 Q (gpm) 21.85 Ø 9.45 Ø 11.7 Ø.35 71 lbs MIOR MSA / (ft) 16 Discharge connection 4 / 3 14 6.2 P (4.6 kw) 12 1 5.3 kw 8 35 RPM 6 4 Rated current at 46 V 7.1 A 2 Rated current at 575 V 5.7 A 1 2 3 4 5 6 Q (gpm) 26.7 Ø 11.26 : Ø 13.2 : Ø 13.7 Ø.4 116 lbs
DRAIAGE PUMPS: MAJOR MSA MATADOR MSA MAJOR MSA / (ft) 2 Discharge connection 4 / 3 8.9 P (6.6 kw) 15 7.7 kw 1 348 RPM 5 Rated current at 46 V 11 A Rated current at 575 V 8.4 A 1 2 3 4 5 6 7 Q (gpm) 26.7 Ø 11.26 : Ø 13.2 : Ø 13.7 Ø.4 119 lbs MASTER MSA / / S (ft) 3 Discharge connection 6 / 4 / 3 25 S 15 P (11 kw) 2 13 kw 15 3465 RPM 1 Rated current at 46 V 17 A 5 Rated current at 575 V 14 A 2 4 6 8 1 Q (gpm) : 31.3 : 32.5 S: 35. Ø 13.6 Ø 16.85 Ø.48, : 216 lbs S: 223 lbs MATADOR MSA / (ft) 25 Discharge connection 6 / 4 2 27 P (2 kw) 15 22 kw 35 RPM 1 5 Rated current at 46 V 3 A Rated current at 575 V 24 A 2 4 6 8 1121416 Q (gpm) 35.8 Ø 15.6 : Ø 19.7 : Ø 2.3 Ø.48 318 lbs
DRAIAGE PUMP: MAXI MSA MAXI MSA Discharge connection 4 (ft) 35 3 42 Rated current at 46 V Rated current at 575 V 58 P (43 kw) 48 kw 3545 RPM 65 A 52 A 25 2 15 1 5 2 4 6 8 1 Q (gpm) Ø 17.5 Ø.4 777 lbs SLUDGE PUMPS: SALVADOR MSA - SADY MSA SALVADOR MSA 3-phase Discharge connection 3 3.5 P (2.6 kw) (ft) 6 5 4 26.2 Rated current at 46 V Rated current at 575 V 3.1 kw 335 RPM 4.4 A 3.5 A 3 2 1 5 1 15 2 25 Q (gpm) Ø 9.8 Ø 14 Ø 2 75 lbs SADY MSA / Discharge connection 3 / 3 8.9 P (6.6 kw) 7.7 kw (ft) 14 12 1 8 6 32.1 Rated current at 46 V Rated current at 575 V 35 RPM 11 A 8.4 A 4 2 5 1 15 2 25 3 Q (gpm) Ø 11.2 Ø 18.3 Max. : Ø 1,3, : Ø 1,8 127 lbs
DRAIAGE AD SLUDGE PUMPS Materials Casted parts: Aluminum (except Maxi) Cast Iron (Maxi) Outer casing: Stainless steel: (except Maxi) Galvanized steel: (Maxi) Stator housing: Aluminum (Minex - Master) Cast iron (Matador - Maxi) Motor shaft: Stainless steel Impeller: ard-iron Wear plate: ard-iron (Minette - Matador) Diffusers: itrile rubber Pump housing: Polyurethane (Salvador - Sandy) Screws and nuts: Stainless steel O-rings: itrile rubber Shaft seals Cartridge seal: (except Maxi) Pre-assembled double mechanical shaft seals with oil compartment between the seals. Material lower seal: Tungsten carbide - tungsten carbide Material upper seal: Tungsten carbide - ceramic (Minex - Master) Tungsten carbide - tungsten carbide (Matador - Maxi) Cables AWG, SubCAB, Drillcord Water specifications Max. submersion depth: 66 ft Max. liquid temperature: 14 F Max. liquid density: 68 lbs/ft 3 p of the liquid: 5-8 (Maxi 6-13) Accessories Zinc anodes Stainless steel impeller (except Maxi) Stainless steel wear plate (except Maxi) Control box with breaker (ot all accessories are available for all pump models) MSA Approvals United States Bureau of Mines State of Pennsylvania Specifications can be changed without notice. Grindex Trouble free dewatering since 196
The Grindex team 95373 US 6 z. 211.1 For some 5 years, Grindex has specialized in designing and manufacturing electrical submersible pumps for professionals. Durable and dependable, they are used in the most demanding and specialized applications worldwide. We have delivered over 3, pumps in more than 1 countries. We offer pumps for almost any application. Our range includes drainage pumps, sludge pumps, slurry pumps and stainless steel pumps. When you are running a Grindex pump, you can rest assured that a dedicated team is watching your back. Our experts are always there to see to your every need. Through our global network of sales and service centers, we provide the best level of support possible day and night, seven days a week. It s all part of the service. For more information, please visit www..com/us Grindex Pumps 18524 81st Avenue Tinley Park IL 6487 Ph.: 78 781-2135 Fax: 78 532-8767 info.us@.com