The Chassis OC 500 RF. Technical information.

The Chassis OC 500 RF. Technical information.

Models (Euro V) Models () OC 500 RF 1936 / OC 500 RF 1942 / OC 500 RF 1943 OC 500 RF 1930 / OC 500 RF 1936 Illustration of Euro V OC 500 RF 1939 / OC 500 RF 1943 OC 500 RF 2542 / Illustration of Euro V 2

Dimensions and weights Euro III/V Length chassis 8,870 mm 9,695 mm 8,870 mm 8,870 mm 9,695 mm Width chassis 2,400 mm 2,400 mm 2,400 mm 2,400 mm 2,400 mm Wheelbase, front axle drive axle 3,000 mm 3,000 mm 3,000 mm 3,000 mm 3,000 mm Wheelbase, drive axle - trailing axle - 1,350 mm - - 1,350 mm Overhang, front min./max. 2,200 mm/2,570 mm 2,200 mm/2,570 mm 2,200 mm/2,570 mm 2,200 mm/2,570 mm 2,200 mm/2,570 mm Overhang, rear max. 3,300 mm 2,775 mm 3,300 mm 3,300 mm 2,775 mm Angle of approach min./max. 7.4 /13.4 7.4 /13.4 7.4 /13.4 7.4 /13.4 7.4 /13.4 Angle of departure 7.4 8.8 7.4 7.4 8.8 Tyre size 295/80 R 22.5 295/80 R 22.5 295/80 R 22.5 295/80 R 22.5 295/80 R 22.5 Track width, front axle 2,089 mm 2,089 mm 2,089 mm 2,089 mm 2,089 mm Track width, drive axle 1,803 mm 1,803 mm 1,803 mm 1,803 mm 1,803 mm Track width, trailing axle - 2,119 mm - - 2,119 mm Maximum front axle turning angle, inside/outside wheel 58 /46 58 /46 58 /46 58 /46 58 /46 Frame height above road, front 789 mm 789 mm 789 mm 789 mm 789 mm Frame height above road, rear 927 mm 927 mm 927 mm 927 mm 927 mm Weight Gross vehicle weight, max. permissible* 20,000 kg 25,500 kg 20,000 kg 20,000 kg 25,500 kg Front axle, max. permissible* 7,500 kg 7,500 kg 7,500 kg 7,500 kg 7,500 kg Drive axle, max. permissible* 12,500 kg 12,000 kg 12,500 kg 12,500 kg 12,000 kg Trailing axle, max. permissible* - 6,000 kg - - 6,000 kg * Dependent on country of registration 3

Drive train/technology (Euro III) 330 Engine OM 457 (Euro III) 300 Spec. consumption (g/kwh) Output (kw) 270 240 210 180 150 120 90 220 200 180 700 900 1100 1300 1500 1700 1900 2100 310 kw at 2,000 rpm (80/1269/EEC) 1,900 Nm at 1,100 rpm 260 kw at 2,000 rpm (80/1269/EEC) 1,750 Nm at 1,100 rpm Steady-state full-load curves Speed (rpm) 2000 1800 1600 1400 1200 1000 Torque (Nm) Engine OM 457 Displacement 12 l Output (standard/special equipment) 260 kw / 310 kw kw Cylinders/arrangement 6/in-line Max. torque 1,750 Nm / 1,900 Nm at 1,100 rpm Transmission Mercedes-Benz manual transmission, 6-speed Steering ZF power steering Axles Front axle Independent wheel suspension Drive axle Mercedes-Benz RO 440 Trailing axle Independent wheel suspension Brakes Electropneumatic Braking System with disk brakes Anti-lock Braking System (ABS) 4

Drive train/technology (Euro V) 320 Engine OM 457 (Euro V) 300 280 Spec. consumption (g/kwh) Output (kw) 260 240 220 200 180 160 220 200 180 800 1000 1200 1400 1600 1800 2000 2200 Speed (rpm) 315 kw at 2,000 rpm (80/1269/EEC) 2,100 Nm at 1,100 rpm 260 kw at 2,000 rpm (80/1269/EEC) 1,850 Nm at 1,100 rpm 2200 2000 1800 1600 1400 1200 1000 800 Torque (Nm) Engine OM 457 Displacement 12 l Output (standard/special equipment) 260 kw / 260 kw / 315 kw Cylinders/arrangement 6/in-line Max. torque 1.600 Nm / 1.850 / 2.100 Nm at 1.100 rpm Transmission Mercedes-Benz manual transmission, 6-speed Steering ZF power steering Axles Front axle Independent wheel suspension Drive axle Mercedes-Benz RO 440 Trailing axle Independent wheel suspension Brakes Electropneumatic Braking System with disk brakes Anti-lock Braking System (ABS) 260 kw at 2,000 rpm (80/1269/EEC) 1,600 Nm at 1,100 rpm Steady-state full-load curves 5

Drive train and technology () Spec. consumption (g/kwh) Output (kw) 280 260 240 220 200 180 160 140 120 100 80 240 220 200 180 Engine OM 936 () 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 Speed (rpm) 260 kw at 2,200 rpm (80/1269/EEC) 1,400 Nm at 1,200-1,600 rpm 1600 1400 1200 1000 800 600 400 Torque (Nm) Engine OM 936 Displacemant 7.7 l Output (standard) 220 / 260 kw Cylinders/arrangement 6/in-line Max. torque 1,200 Nm / 1,400 Nm at 1,200-1,600 rpmn Transmission Mercedes-Benz manual transmission, 6-speed Steering ZF power steering Axles Front axle Independent wheel suspension Drive axle Mercedes-Benz RO 440 Brakes Electropneumatic Braking System with disk brakes Anti-lock Braking System (ABS) kw at 2,200 rpm (80/1269/EEC) 1,200 Nm at 1,200-1,600 rpm Steady-state full-load curves 6

Drive train and technology () 330 Engeine OM 470 () 310 290 Spec. consumption (g/kwh) Output (kw) 270 250 230 210 190 170 2800 2400 2000 1600 1200 800 220 200 180 800 1000 1200 1400 1600 1800 2000 2200 Speed (rpm) Torque (Nm) Engine OM 470 Displacement 10.7 l Output (standard/special equipment) 290 kw/315 kw Cylinders/arrangement 6/in-line Max. torque 1,900 Nm / 2,100 Nm at 1,100 rpm Transmission Mercedes-Benz manual transmission, 6-speed Steering ZF power steering Axles Front axle Independent wheel suspension Drive axle Mercedes-Benz RO 440 Trailing axle Independent wheel suspension 315 kw at 1,600 rpm (80/1269/EEC) 2,100 Nm at 1,100 rpm 290 kw at 1,600 rpm (80/1269/EEC) 1,900 Nm at 1,100 rpm Steady-state full-load curves Brakes Electropneumatic Braking System with disk brakes Anti-lock Braking System (ABS) 7

Standard and special equipment (selected) Euro III/V Engine Engine Mercedes-Benz OM 457 LA, 260 kw (Euro III) / - / - - Engine Mercedes-Benz OM 457 LA, 260 kw (Euro V) / - / - - Engine Mercedes-Benz OM 457 LA, 310 kw (Euro III) - / / - / - Engine Mercedes-Benz OM 457 LA, 315 kw (Euro V) - / - / - / Engine Mercedes-Benz OM 936 LA, 220 kw () - - / Engine Mercedes-Benz OM 936 LA, 260 kw () - - / Engine Mercedes-Benz OM 470, 290 kw () - - / Engine Mercedes-Benz OM 470, 315 kw () - - / Tailpipe is angled toward the road Vehicle compliant with ECE R 107.02 Engine encapsulation Euro III/V Transmission Transmission Mercedes-Benz GO 190, 6-speed manual, power-assisted / - / - Transmission Mercedes-Benz GO 210, 6-speed manual, power-assisted / / Transmission Mercedes-Benz GO 240, 6-speed manual, power-assisted - / - / - / Transmission Mercedes-Benz GO 250-8 (PowerShift), 8-speed, automated - - / Transmission ZF-AS Tronic, 12-speed, automated - / / Transmission ZF EcoLife, 6-speed, automatic transmission, incl. retarder / / - / - / Transmission Voith Diwa, 4-speed, automatic transmission - - / / / Secondary water retarder (SWR) - - Hydrodynamic retarder - - - Automatic shift program, topography-dependent for automatic transmission (included in ZF Ecolife) / / - / - / 8

Euro III/V Axles Rear axle Mercedes-Benz RO 440, overall ratio 2.864 / / Rear axle Mercedes-Benz RO 440, overall ratio 3.154 / / Rear axle Mercedes-Benz RO 440, overall ratio 3.583 Rear axle Mercedes-Benz RO 440, overall ratio 3.909 Rear axle Mercedes-Benz RO 440, overall ratio 4.300 / / Rear axle Mercedes-Benz RO 440, overall ratio 4.778 Rear axle Mercedes-Benz RO 440, overall ratio 5.222 / - / - Rear axle Mercedes-Benz RO 440, overall ratio 5.875 / - / - Anti-roll bar on front axle and drive axle Trailing axle actively steered Trailing axle not steered Euro III/V Heating/ventilation/air conditioning Provision for air-conditioning with refrigerant compressor Provision for air-conditioning without refrigerant compressor Auxiliary heater Standard equipment/equipment at no extra charge Special equipment - not available 9

Standard and special equipment (selected) Euro III/V Chassis Brake Assist System (BAS) Acceleration Slip Regulation (ASR) Retarder System Integration (DBI) Electro-pneumatic braking system (EBS) with integrated Anti-lock Braking System (ABS) Electronic Level Control (ENR) Electronic Stability Program (ESP ), including Acceleration Slip Regulation (ASR), ESP including ASR, can be deactivated via a button on the instrument panel AEBS (Advanced Emergency Braking System)* * * * Lane departure warning system (LDW)* * * * Bus stop brake with / without starting lock / / / / / Body lift/lowering system, approx. 70 mm max. from normal level Rear overhang extended by 100 mm Tyres 295/80 R 22.5 and steel rims 8.25 x 22.5, mid-centred Tyres 295/80 R 22.5 and aluminium rims 8.25 x 22.5, mid-centred * Standard only with EU approval Class 2/3 and Class 3 10

Euro III/V Chassis Start-Off Assist with short-term Hill-Hold function Starting-off aid Reduction of trailing axle load via button on instrument panel Air spring protective shield Spare wheel Wheel trim of stainless steel Provision for installation of trailer coupling, with tail cross-member and 15-pin socket for trailer operation. Tool outfit Tools for wheel change, incl. jack Standard equipment/equipment at no extra charge Special equipment - not available 11

Standard and special equipment (selected) Euro III/V Supply system Transfer tank 30 l AdBlue tank 45 l * / - / - / Extra capacity fuel tank approx. 290 l (over front axle) - Extra capacity fuel tank approx. 415 l (over and before front axle) Extra capacity fuel tank approx. 450 l (over front axle) Extra capacity fuel tank approx. 575 l (over and before front axle) Fuel tank can be filled from left and right Deaeration of fuel line by electrical pump - - Priming Port (connector for deaeration of fuel line) - - Test connectors for compressed air system Bad fuel filter Electric heating for bad fuel filter * only valid for Euro V; not available for Euro III 12

Euro III/V Electrical system Batteries, 2 x 200 Ah, low maintenance, Super Heavy Duty version Batteries, 2 x 225 Ah, low maintenance, Super Heavy Duty version Battery displacement further forwards (electrical provision only) Battery tray with sliding rails Onboard diagnostics (OBD), integrated diagnostic system (IDS) Cruise control Fire detection system for engine compartment monitoring EU control unit, digital, DTCO, without engine speed recorder Daytime running lights circuit Multifunction steering wheel Fuel consumption indicator Standard data interface for Bus Fleet Management Systems (FMS interface) Automatic circuit-breakers instead of fusible links. Air horn Engine Start/Stop switch Engine oil level indicator in display Standard equipment/equipment at no extra charge Special equipment - not available 13

Glossary Acceleration Slip Regulation (ASR): The ASR prevents wheelspin when driving away on a slippery surface. It provides no more power than the drive wheels are able to transfer to the road surface. Wheelspin by one wheel - e.g. on an icy roadside - is prevented by metered braking. AEBS (Advanced Emergency Braking System) and Lane Assist (SPA): Most accidents begin long before a collision: for example, with poor visibility or unforeseen hazards. While the SPA warns the driver - by means of seat vibration - of an unintended crossing of the lane markings, the AEBS reduces the danger of driving into slow-moving vehicles or stationary obstacles ahead. If danger threatens, it initiates partial and full braking as part of an ascending scale of warnings, so as to avoid a rear-end collision or to reduce damage in the event of an accident. It therefore reliably complies with the European regulations on automatic emergency braking. Anti-lock Braking System (ABS): The braking forces acting on the individual wheels are distributed by the ABS so that even in an emergency braking situation no wheel is blocked for any length of time and the steering control of the bus is largely maintained. BlueEfficiency Power: In developing the new BlueEfficiency Power engine generation, Mercedes-Benz has broken new ground. The goal was to develop a new engine that meets the standard and is future-proof without increasing fuel consumption at a high output. Mercedes-Benz had already done development to meet earlier standards for emission technologies. In order to meet the stringent requirements of the new standard, the following technologies are now used in combination: Cooled on-demand exhaust gas recirculation (EGR) Diesel particulate filter (DPF) SCR technology Another major goal in the development of the new engine generation beside compliance with was economy. That primarily means a low fuel consumption. In coach operations, levels as for Euro V are achieved or even bettered. In addition, the developers have concentrated on low maintenance costs. As a result, the maintenance intervals for the OM 470 in coach operations have been extended by up to 30 %, in comparison with the predecessor engines. Another factor affecting economy is the long life and reliability of the engine. To ensure this, the engines have been tested worldwide under the toughest conditions. Up to now, the engines have covered more than 60 million kilometres in endurance tests on test stands and in the field never before has an engine been so intensively tested. BlueTec 6 : The new exhaust emission standard requires a further drastic lowering of emissions. To meet these requirements, as part of the introduction of BlueEfficiency Power, a completely new generation of engines and exhaust after-treatment systems with the designation BlueTec 6 is being launched. With this new development, Mercedes-Benz is continuing the tradition as a pioneer in environmental protection. The provisions of the new emission standard demand a reduction of 66 % for particulate emissions; in the case of nitrogen oxide levels, a reduction of 80 % compared with Euro V must be realised. Earlier Euro standards were achieved with the following exhaust emission technologies: exhaust gas recirculation or BlueTec engine technology comprising a highly efficient engine and SCR system with or without a diesel particulate filter. 14

In order to meet the required levels, a complex system of emission control is necessary for the engines. The three proven technologies are now brought together in a matched system optimised for fuel economy. Coupling new engines and complex after-treatment with different drive train combinations and vehicle concepts in the construction of buses of different heights and lengths necessitates making complex changes in the vehicle body. Next to the greatest possible environmental compatibility, the primary aims of the development of the new engine generation included economic aspects like low lifecycle costs. That means first and foremost a low fuel consumption. In coach operations, this is at the level of Euro V or even lower for the new engine. With an eye on saving resources, environmental aspects and rising diesel fuel prices worldwide, the Mercedes-Benz development engineers have succeeded in achieving a milestone in engine development with the BlueEfficiency Power engines. Brake Assist (BAS): The BAS electronics are able to detect emergency braking situations and automatically build up maximum braking power within fractions of a second. This significantly shortens the stopping distance of the bus. Cataphoretic dip priming (CDP): Cataphoretic dip priming (CDP) is an electro-chemical process for coating the complete body skeleton in an immersion bath. It is ideal for painting intricate structures and large numbers of units. This water-based paint protects the bus perfectly against corrosion because the paint coat is applied everywhere to the body with uniform thickness. Cataphoretic immersion priming is demonstrably the best protection against corrosion in vehicle construction at present available. Electronic level control: Passengers and luggage are not always evenly distributed in the vehicle. As a result, the height of the vehicle varies from wheel to wheel. The electronic level control automatically regulates the vehicle height at each wheel so that the step height is always the same. Electro-pneumatic braking system (EBS): As a further development of the conventional air brake, the electro-pneumatic braking system offers numerous advantages. When braking, the control unit first activates the retarder. If greater deceleration is required, the control unit uses the information in the data network to determine the optimum braking pressure for each axle. The electro-pneumatic braking system thus enables much shorter stopping distances and significantly less brake disc and lining wear. Electronic Stability Program (ESP ): In situations where the driving dynamics are critical, ESP selectively controls engine output and the braking forces on each wheel individually. Within the boundaries of the physical laws, finely regulating the braking of the vehicle in this way prevents any possible breakaway by the bus. ESP therefore contributes noticeably to a reduction in the tendency to understeer and the risk of skidding during cornering or evasive manoeuvres. 15

Important for you. Important for us. Technical data stored in the vehicle. Electronic vehicle components (e.g. Airbag Control Unit, Engine Control Unit) contain data storage for vehicle Technical Data, including but not limited to Diagnostic Trouble Codes in the event of a malfunction, vehicle speed, braking force, or operating conditions of the Restraint System and Driver Assistance Systems in case of an accident (no audio and no video data recording). This data is either stored volatile, punctual as snapshot e.g. Diagnostic Trouble Codes, over a short period of time (a few seconds only) e.g. in case of an accident or in aggregated form e.g. for component load evaluation. The data can be read using interfaces connected to the vehicle. Trained technicians can process and utilize the data to diagnose and repair possible malfunctions. The manufacturer can use the data to analyze and improve vehicle functions. When requested by the customer, Technical Data can form the basis of additional optional services. In general, data from the vehicle is transferred to the manufacturer or a third party only according to legal allowance, or based on a contractual customer consent in accordance with data protection laws. Further information regarding storage of vehicle Technical Data is provided in the vehicle Owner s Manual. Mercedes-Benz Buses and Coaches naturally handles customer data confidentially. About the information in this brochure. Information about the product is subject to change after this brochure went to press (01.08.2016). The manufacturer reserves the right to make changes in the design or form, deviations in colour, and changes to the scope of supply during the delivery period, in so far as the changes or deviations are reasonable for the customer, having regard to the interests of the seller. The illustrations may also show accessories and special equipment optional extras that do not form part of the standard scope of supply. Colours may vary for typographical reasons. This brochure may also contain models and support services that are not available in some countries. Statements about statutory, legal and tax regulations and their effects are only applicable in the Federal Republic of Germany at the time this brochure went to press. Therefore please contact your Mercedes-Benz sales representative for the latest binding version. www.mercedes-benz.com/buses EvoBus GmbH, Mercedesstraße 127/6, 70327 Stuttgart BUS/MPM-B MB-OC500-RF-2-EN-08/16