MAXI MOVE Parts List October 203...with people in mind
Design Policy and Copyright and are trademarks belonging to the ArjoHuntleigh group of companies. ArjoHuntleigh 20. As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice. The content of this publication may not be copied either whole or in part without the consent of ArjoHuntleigh.
General Information Before ordering spare parts, study the exploded view closely and make sure that you are familiar with all the spare parts involved. Please note that gaskets and o-rings normally are included in kits and can not be ordered separately. Before contacting the ArjoHuntleigh Parts Sales department, always have the following information at hand: Product number: See label. Serial number: See label. Product Number Codification KMCXXX Product Number Nomenclature JIB OPTION KMCXXX Product number N - STANDARD JIB E - EXTENDED JIB KMC-XXXXX Serial number SCALE OPTION X - WITHOUT SCALE A - WITH CERTIFIED SCALE (CLASS III) U - WITH NON-CERTIFIED SCALE 202-04 Manufacturer information Date of manufacture WHEEL OPTION S - STANDARD HEIGHT (WHEEL Ø 00MM) L - LOW HEIGHT (WHEEL Ø 86 MM) E - EXTRA LOW HEIGHT (WHEEL Ø 49 MM) MAXI MOVE Example of ID label Modifications made to the equipment without ArjoHuntleigh s express acknowledgement will invalidate supplier s product liability. 3
How to Read Parts List Tables Kit: Part #: Description: Included Items: Refers to an item that consist of a replacement kit. Use these part numbers as a reference when ordering. A short explanation of the kit being referred to. Refers to items, listed in the table, that are contained within the kit. Letters refer to the relevant table. Numbers refer to an item in the table. A REPLACEMENT KITS TABLE Kit Part # Description Included Items K 700-0000 FIRST REPLACEMENT KIT B2 K2 700-00002 SECOND REPLACEMENT KIT B6-B7 K3 700-00003 THIRD REPLACEMENT KIT B, B3-B4 K4 700-00004 FOURTH REPLACEMENT KIT B5 K 700-0000 FIRST REPLACEMENT KIT B2 Item #: Part #: From s/n to s/n: Remarks: Kit: Refers to the callout numbers that point to the various parts in the exploded drawings. Use these part numbers as a reference when ordering. Description: A short explanation of the part being referred to. indicates the first and last serial number of the product in which a particular part was included (see Product Number Codification). Qty: Required quantity of the part found on each product. General notes relevant to the part. Refers to a kit that includes the part Note: An item that belongs to a kit cannot be ordered. separately. B PARTS DETAIL TABLE 00-0000 FIRST PART 2 This part was replaced K3 2 00-00002 SECOND PART K 3 00-00003 THIRD PART K3 4 00-00004 FOURTH PART K3 5 00-00005 FIFTH PART Include item 3 K4 6 00-00006 SIXTH PART - KMC-0023 K2 7 00-00007 SEVENTH PART KMC-0024 - Not Illustrated K2 4
Contents D - Jib Assembly Page 2 E - Backplate Assembly Page 4 5 2 8 9 7 3 4 5 20 2 22 4 3 7 6 23 24 5 8 25 6 26 27 9 0 28 29 32 2 8 30 3 2 2 C - Mast Assembly Page 0 F - Leg and Chassis Assembly Page 6 6 3 7 4 5 32 (Optional) 33 A - Replacement Kits Page 6 32 (Optional) 33 K2 K5 K8 K9 K6 B - Accessories Page 8 K7 G - Spreader Bars Page 8-37 H - Electrical Wiring Diagram Page 38 Note : Applies to all units Applies only to units with serial number below KMC-388 P4 COLUMN ACTUATOR P5 8 P 7 PWR J9 P2 2 STOP / START SWITCH 2 P3 MAIN BOARD P P2 P2 9 9 8 BATTERY 3 P7 6 P3 J BRAKE BOARD P2 LEG ACTUATOR P6 P3 P P 5 HANDSET J2 24 P P P5 P2 4 25 P2 P2 DPS MOTOR 26 27 P J2 5 M 20 3 2 P3 0 SCALE P7 J8 J5 MEM 20 4 J 22 P3 P6 MICROSWITCH P4 2 6 P MICROSWITCH P2 MEMBRANE 2 7 2 Preventive Maintenance Replacement Parts - Page 40 5
A - Replacement Kits K2 K5 K8 K9 K6 K7 6
A REPLACEMENT KITS Part Designations Kit Part # Description Included Items K 700-25305 Column actuator replacement kit C3, C27 - C28 K2 700-25306 Band replacement kit C25, D4 - D42 K3 700-2530 Roller jib replacement kit D40, D43 - D44 K4 700-25307 Slider replacement kit C2 - C23, C37, C39, C42 - C43 700-2532 Class III scale replacement kit (US) 700-25320 Class III scale for standard jib replacement kit (CE) K5 700-25325 Class III scale for extended jib replacement kit (CE) 700-25335 Scale for standard jib upgrade kit (CE) D - D9, D - 5, D8 - D34 700-25340 Scale for standard jib upgrade kit (NON-CE) 700-25350 Scale for extended jib upgrade kit (CE) K6 700-25027 Combi harness replacement kit D2 - D3 K7 700-25302 Chassis actuator replacement kit F5-7, F22 K8 700-25345 Upper limit switch replacement kit C36 K9 700-25329 Dummy block replacement kit D2 - D5, D7 - D8, D0, D2 - D3, D8 - D25, D27 - D35 K0 700-2535 DPS electric connector kit D32 - D34 K 700-253 Handle replacement kit E, E3 - E7, E9 K2 K3 K4 700-00088 Front caster replacement kit -00 mm Swivel (KMCS ** ) 2x F3 700-00089 Front caster replacement kit - 86 mm Swivel (KMCL ** ) 2x F6 600-250 Front caster replacement kit - 49 mm Swivel (KMCE ** ) 2x F8 700-2530 Standard height leg replacement kit (KMCS ** ) 2x (F - F3, F9 - F20), F32, F33 700-25300 Low height leg replacement kit (KMCL ** ) 2x (F4 - F6, F9 - F20), F32, F33 700-2533 Extra Low height leg replacement kit (KMCE ** ) 2x (F7 - F0, F9 - F20) 700-25304 Standard base replacement kit F - F3, F - F33 700-25303 Low height base replacement kit F4 - F6, F - F33 K5 700-25360 Flexible cable for standard jib kit H20 - H2 700-2536 Flexible cable for extended jib kit K6 700-2500 Battery support replacement kit E8, E 700-00084-0 UMC PCB replacement kit for KMC * UN & KMC * XN K7 700-00084-02 UMC PCB replacement kit for KMC * XE 700-00084-33 UMC PCB replacement kit for KMC * AN 700-00084-34 UMC PCB replacement kit for KMC * AE H, H7 (modified), hardware and replacement instructions K8 700-25002 Leg Aligment Kit F32, F33 K9 700-00094 Rear caster replacement kit 2x (F23, F26) Note: -XX in listed part number refers to color code suffix: 24 = Cache (light) Blue, 3 = Dark Blue 7
B - Accessories 8
B Item Part # Description ACCESSORIES From s/n To s/n Qty Remarks Kit 00.25060 Maxi Move Instruction for Use 00.25065 Maxi Move Preventive Maintenance Schedual 00.25075 Maxi Move Service and Repair Manual - 2 NDA8200-INT Universal wall charger 3 NDA000-20 Battery Pack NDA0200-20 obsolete 4 KMA82387-24 Two-Point Spreader Bar - Page 8 (obsolete) 700.9326 Two-Point Spreader Bar (227 kg) - Page 9 5 KMA82203-24 Four-Point Spreader Bar Page 20 (obsolete) 700.933 Four-Point Spreader Bar (227 kg) Page 2 6 700-9303 Loop Medium Combi Spreader bar (227 kg) Page 22 700.9306 Combi Medium Manual DPS Spreader Bar (227kg) Page 23 7 KMA82338-XX Small Manual DPS Spreader Bar Page 24 (obsolete) KMA8259-24 Medium Manual DPS Spreader Bar Page 24 (obsolete) 700.930 Small Manual DPS Spreader Bar (227 kg) Page 26 KMA8265-24 Medium Powered DPS Spreader Bar Page 28 (obsolete) 8 KMA82205-3 Large Powered DPS Spreader Bar Page 28 (obsolete) 700.93 Combi Medium Powered DPS Spreader Bar (227 kg) Page 30 9 700.936 Combi Large Powered DPS Spreader Bar (227 kg) Page 32 700-9302 Stretcher Frame (60 kg) Page 34 KMA82334 Stretcher Frame Page 35 (obsolete) 0 KMA003-20 Strap Stretcher Page 36 (obsolete) KRA220-20 Scoop Stretcher Page 37 (obsolete) 9
C - Mast Assembly 3 4 6 7 5 0
C MAST ASSEMBLY Part Designations 200.25026 Column top cover 2 00.2502 Scale Option label 3 200.2503 Emergency lowering cover 4 200.25030 Emergency lowering lever 5 240.2507 Outer mast 6 203.25025 Emergency lowering locking pin 7 362.25086 Emergency lowering strap pin 8 000.0092 Split ring 9 00.2505 Emergency Lowering sticker 0 200.25044 Outer mast protector insert 2 000.0335 M6 x 25 zinc socket screw 2 200.25027 Hex interface emergency lowering 3 200-25094 Top casting retaining bolt 4 202.25022 Top outer bracket 5 000.25005 22-25 x 4.5 mm flange bushing 6 200.25024 Roller Pin 2 7 MX0560-00 Roller 2 8 200.25083 Cable guide roller 9 200.25084 Cable cover plate 20 000.025 M4 x 6 flat Phillips zinc screw 2 200.25037 Upper slider - front K4 22 203.25040 Upper slider adjust. block K4 23 204.25042 Adjustment screw slider 2 K4 24 000.25045 4-20 /4 flat zp Torx screw 2 25 362.2508 Lift band assembly 2 K2 26 200.25086 Flexible cable slide 27 400-25000 Actuator assembly (000.25035) (with 50 mm spiral wire wrap) K 28 000-00023 M6 x 2 socket low zp adhesive screw 4 29 200.25043 Lift strap pin 2 30 000.0205 M3 x 6 pan Phillips zinc screw 2 3 KRX00640-00 Micro switch 32 KPX000-00 Plate switch mounting 33 202.2502 Top inner bracket 34 E0275 3.9" Tie wrap 2 35 200.25066 Lower limit spring wire 36 KRX00430-00 Mounted micro switch panel K8 37 200.25036 Upper slider - rear K4 38 240.250 Inner mast 39 200.25039 Lower slider - front K4 40 000.0295 M5 zinc starwasher KMC-03000 4 000.02545 M5 x 6 socket screw KMC-03000 42 200.25038 Lower slider - rear K4 43 203.2504 Lower slider adjustment block K4
D - Jib Assembly 2
D JIB ASSEMBLY 200.25056 Jib top cover 2 402-25027 Combi wire harness interface K6 3 E0289 Tie wrap 4 000.25028 M2 x 70 zinc button head bolt 2 5 000.04750 M2 zinc flat washer (20 od) 2 6 405.2080 Ferrite 7 000.25025 M20 zp ( mm th) jam locknut 8 000.25026 3/32 x 2 zp cotter pin 9 200.25200 Single-point load cell K5 0 450-0059 Wire-clip latch 2 00.00260 Tape 3M 2 402-25028 T-Bar Socket 3 203.25078 Combi flat washer 4 204.25202 Load cell shim 0 to 3 According to the assembly 5 000.02480 4.0 x 2 tap screw 6 6 000.02545 M5 x 6 socket screw KMC-03000 7 000.0295 M5 zinc starwasher KMC-03000 8 000.25042 Top combi bushing adaptor 9 000.25020 M4 x 27 flat zp adhesive screw 20 236.25034 Combi adaptor K5, K9 2 000.03030 M6 x 0 zinc setscrew 22 200.25035 Friction lugg 23 000.2500 4.2 x 8.0 x 0.4 mm spring washer 24 000.2505 M0 x 8 zinc flathead setscrew 25 000.25030 30-34 x 20 mm bushing with hole 26 200.25080 Combi jib bottom cover 27 000.04855 M2 zinc FUJILOK locknut 2 28 690538 M4 x 8 flat ss dri-loc setscrew 29 000.9950 ø5 mm ball bearing 5 30 200.25093 2-4 x 3 mm flange bushing (gfm) 2 3 239.25074 Machined T-bar K5, K9 32 KMX826-00 Pick-up assembly K0 33 200-2552 T-bar connector guard K0 34 000.0250 M4 x 8 zinc pan Torx screw K0 35 204.25072 Dummy block (for non-scale units KMC * X * ) K9 36 240.25060 Jib 37 00.25000 SWL (227 kg [500 lb]) label 2 KMC- ** S 38 200.25069 Jib right finger antipinch 39 200.25068 Jib left finger antipinch 40 200.25079 Machined jib roller 4 K3 4 KPX0280-00 0 mm starlock push-on fastener 2 42 000.04450 M0 2.5t Nylon flat washer 2 43 200-25095 Block guide 2 K3 44 000.0335 M6 x 25 zinc socket screw 4 45 200-250 Jib cap 2 46 240.25075 Extended jib (for KMC ** E) 47 00.25005 SWL (30 kg [287 lb]) label 2 KMC- ** E 48 00.25045 "No Stretcher" label 2 KMC- ** E 3
E - Backplate Assembly 2 5 3 7 8 9 4 5 2 22 20 3 4 6 7 23 8 5 24 25 6 9 26 27 0 28 8 32 2 30 29 3 2 2 4
E BACKPLATE ASSEMBLY 239.25020 Handle K 2 200.25045 Slider for handle 3 700.25044 Abridged instructions for clip slings included with Maxi Move 700.25047 Abridged instructions for loop slings included with loop-sling spreader bar 4 200.25046 Adjustable slider handle 5 KPX00290-00 Slipper 2 6 204.25042 Adjustment screw slider 7 000.03607 M8 x 6 nylon flat setscrew 2 8 000-00023 M6 x 2 low zp adhesive socket screw 4 9 236.25050 Backplate assembly 0 700.3700 ArjoHuntleigh floor lift DPS LCD handset 200.242 Battery support K6 2 000.0250 M4 x 8 zinc pan Torx screw 8 3 000.02480 4.0 x 2 tap screw 7 4 200.25052 Control box top 5 200.25089 Plastic protection film 6 492-00084-XX ArjoHuntleigh UMC PCB KMC-6388 - see section G for details 7 492-00066-XX ArjoHuntleigh UMC PCB - KMC-6387 see section G for details K7 8 492.00070 PCBA brake board for motor - KMC-6387 K7 9 00.0026 Adhesive rubber tape - KMC-6387 K7 20 00.00260 Tape 3M VHB 4952 white 25mm wide - KMC-6387 K7 2 000.020 Tie wrap mount adhesive 9mm - KMC-6387 K7 22 E0280 Tie wrap /8 x 4 black - KMC-6387 K7 23 200.2420 Control box 24 00.2500 Maxi Move sticker 25 00.2400 Control box membrane 26 848700 STICKER - ArjoHuntleigh LOGO 27 200.2428 Handset door 28 KKX0730-00 5 A On/Off switch 29 KKX2360-00 Bezel 30 450.0032 Connector with insulating pin 3 000.0200 M3 x 6 zinc flat Phillips screw 2 32 000.02420 M3 zinc locknut 2 5
F - Leg and Chassis Assembly 32 (Optional) 33 32 (Optional) 33 6
F LEG AND CHASSIS ASSEMBLY Part Designations 200.2500 Leg cover (for KMCS ** ) 2 2 700.25000 Leg assembly (for KMCS **) 2 includes 2 x 000.25000 K3 pivot bushings 3 000.20480 00 mm light grey swivel wheel (for KMCS ** ) 2 K2, K3 4 200.250 Low height leg cover (for KMCL ** ) 2 5 700.25003 Low height leg assembly (for KMCL includes 2 x 000.25000 **) 2 pivot bushings 6 000.20475 86 mm light grey swivel wheel (for KMCL ** ) 2 K2, K3 7 700-2505 Extra Low Height Leg (for KMCE **) 2 includes 2 x 000.25000 K3 pivot bushings 8 600-250 49 mm Swivel Wheel (for KMCE ** ) 2 K2, K3 9 000.03420 M6 Zinc Lock Washer 2 0 000.0305 M6 x 6 Zinc Nutton Head Screw 2 000.04095 M0 x 25 flat zp adhesive screw 2 2 203.25082 Mast link plate 3 204.25007 Mast link 4 236.25005 Base top 5 JX68800-00 Safety fastener 2 6 200.25033 Foam ring 7 KRX0280-00 Doubled-ended actuator K7 8 E0275 Tie wrap black /8 x 3 in 9 000.04275 M0 x 50 flat zinc setscrew 2 20 000.0446 M0 zinc locknut 2 2 200.25009 Leg pivot assembly 2 22 200.25059 Leg-opening clevis pin 2 23 000.0440 M0 zinc locknut 2 24 200.25087 Directional lock plug - KMC4349 25 220.25006 Base bottom 26 000.20485 ø00 mm total-lock grey wheel 2 K9 27 000.04720 M2 x 20 flat zp adhesive screw 2 28 000.0058 3/4 in snap-in black hole plug 2 29 000.04075 M0 x 20 zinc socket screw 6 30 000.04425 M0 zinc lockwasher 7 3 000.04253 M0 x 40 zinc socket screw Adhesive 32 00-250 Shim 4 Optional K8 33 00-05 Bolt M0 X 65 Socket Zinc 2 K8 K3 7
G - KMA82387-24 Two-Point Spreader Bar G KMA82387-24 TWO-POINT SPREADER BAR KMX82385-24 Two-hook spreader bar assembly 2 KPX20430-00 Leaf spring 2 3 KMX82050-20 Locking clip Pair 4 LCX8092-00 Safety latch - triangular 8459263 Safety latch - rectangular 5 KMX8245-00 200 kg SWL loop sling label 6 848630 Data label 7 848640 "May only be used" label 8 848642 Serial number label 2 8
G2-700.9326 Two-Point Spreader Bar (227 kg) Part Designations G2 700.9326 TWO-POINT SPREADER BAR (227 KG) 00-0064 Product number 700.9326 2 00.9320 Loop sling size label 2 3 200.05466 Safety latch 2 4 239.9340 Two-hook spreader bar 5 KMX82050-20 Locking clip 6 KPX20430.0 Leaf spring - 700.25047 Abridged loop instructions assembly 9
G3 - KMA82203-24 Four-Point Spreader Bar G3 KMA82203-24 FOUR-POINT SPREADER BAR KMX82375-XX Four-hook spreader bar assembly 2 KPX20430-00 Leaf spring 3 KMX82050-20 Locking clip 4 LCX8092-00 Safety latch - triangular 8459263 Safety latch - rectangular 4 5 KMX8245-00 200 kg SWL loop sling label Pair 6 84863 Data label 7 848640 "May only be used" label 8 84476 Serial number label 20
G4-700.933 Combi Four-Point Spreader Bar (227 kg) G4 700.933 COMBI FOUR-POINT SPREADER BAR (227 KG) 00-0064 Product number 700.933 2 00.9320 Loop sling size label 2 3 200.05466 Safety latch 4 4 239.9342 Four-hook spreader bar 5 KMX82050-20 Locking clip 6 KPX20430.0 Leaf spring - 700.25047 Abridged loop instructions assembly 2
G5-700-9303 Loop Medium Combi Spreader Bar (227 kg) G5 700-9303 LOOP MEDIUM COMBI SPREADER BAR (227 KG) KMX82050-XX Locking Clip 2 239-9303 Loop Medium Combi Frame 3 200.05466 Safety Latch 2 4 00-05406 Sticker Sling Size Loop Med 2 5 00-0063 Product Label 600-9303 6 000-9303 Plastic Plug 2 7 KPX20430-00 Leaf Spring 22
G6-700.9306 Combi Medium Manual DPS Spreader Bar (227 kg) G6 700.9306 COMBI MANUAL DPS MEDIUM SPREADER BAR (227 KG) 000.0440 M0 zp locknut 2 2 00.930 Medium DPS sling size label 2 3 00.9333 700.9306 product number label 4 200.9320 DPS handle 5 239-9409 Manual DPS medium lower frame 6 239-940 Manual DPS medium upper frame 7 GX20460.0 Disk spring washer 2 8 KMX82050-20 Locking clip 9 KMX8267-00 Friction disk 2 0 KPX20430.0 Leaf spring KPX67540.0 6-8 X 6 flange bushing 2 2 MX0450.0 Washer 2 3 MX0460.20 Plastic cap (grey) 2 23
G7 - KMA82338-XX* Small Manual DPS Spreader Bar G8 - KMA8259-24 Medium Manual DPS Spreader Bar (KMA82338-XX SMALL DPS SPREADER BAR NOT ILLUSTRATED) 24
G7 G8 Part Designations KMA82338-XX* SMALL MANUAL DPS SPREADER BAR KMA8259-24 MEDIUM MANUAL DPS SPREADER BAR KMX82365-XX Combi lift support-small (not illustrated) KMX8258-24 Combi lift support-medium 2 KMX82050-20 Locking clip 3 KPX20430.0 Leaf spring 4 KMX8229-20 End cap 2 5 KLX0830.0 3x2 screw 4 6 KMX8267-00 Friction washer 2 7 KMX82360-XX Lift frame assembly-small (not illustrated) KMX8237-24 Lift frame assembly-medium 8 KPX2030.0 End plug 2 9 KPX67540.0 Bush 2 0 GX50460.0 Washer disc spring 2 MX0450.0 Washer 2 2 AX020.0 Nut M0 nyloc type 2 3 MX0460.20 Cap 2 4 KMX0080.0 Plug 5 KPX2000.20 Hand grip 6 KMX82450-00 25 kg SWL label (KMA82338) pair KMX82444-00 228 kg SWL label (KMA8259) 7 848633 Data label-kma82338 848635 Data label-kma8259 8 848640 "May only be used" label 9 84476 Serial number label Note: -XX in listed part number refers to color code suffix: 24 = Cache (light) Blue, 3 = Dark Blue 25
G9-700.930 Small Manual DPS Spreader Bar (227 kg) 26
G9 Part Designations 700.930 SMALL MANUAL DPS SPREADER BAR (227 KG) 000.0440 M0 zp locknut 2 2 00.9305 Small DPS sling size label 2 3 00.933 700.930 product number label 4 200.9320 DPS handle 5 239.932 Combi manual DPS small upper frame 6 239.934 Combi manual DPS small lower frame 7 GX20460.0 Disk spring washer 2 8 KMX82050-20 Locking clip 9 KPX20430.0 Leaf spring 0 KPX67540.0 6-8 X 6 flange bushing 2 MX0450.0 Washer 2 2 MX0460.20 Plastic cap (grey) 2 3 KMX8267-00 Friction disk 2 27
G0 - KMA8265-24 Medium Powered DPS Spreader Bar G - KMA82205-3 Large Powered DPS Spreader Bar KMA8265-XX MEDIUM POWERED DPS SPREADER BAR NOT ILLUSTRATED 28
G0 KMA8265-24 MEDIUM POWERED DPS SPREADER BAR G KMA82205-3 LARGE POWERED DPS SPREADER BAR KMX8263-24 Combi powered DPS-medium (not illustrated) KMX8228-3 Combi powered DPS-large 2 KMX82329-24 Frame powered DPS-medium (not illustrated) KMX82350-3 Frame powered DPS-large 3 KPX6720.20 Knob 4 KMX82050-20 Locking clip 5 KPX20430.0 Leaf spring 6 KMX8260-00 Combi pick-up assembly 7 KMX8264-00 Fastener 2 8 KMX8229-20 End cap 2 9 KLX0830.0 3 x2 screw 4 0 KPX67640.0 Friction washer 2 KPX67200.0 Pin 2 2 KPX6720.0 E-clip 2 3 KMX8254-00 Actuator 4 KPX2030.0 End plug-medium KTX0520.0 End plug-large 2 5 KPX67540.0 Bush 2 6 AX05700.0 Washer M0 2 7 AX020.0 Nut M0 nyloc type 2 8 MX0460.20 Cap 2 9 KMX0080.0 Plug 20 LBX05550.0 "Wet environment" label 2 KMX82687-00 Heat shrink tubing 22 KMX82446-00 Label SWL 228 kg KMX82444-00 Label SWL 228 kg Pair 23 848634 Data label 24 848640 "May only be used" label 25 84476 Serial number label 29
G2-700.93 Combi Medium Powered DPS Spreader Bar (227 kg) 30
G2 700.93 COMBI MEDIUM DPS POWERED SPREADER BAR (227 KG) 00.9300 DPS water level label 2 00.9335 700.93 product number label 3 200.9348 Actuator pin 2 4 400.9300 DPS actuator 5 KMX8260-00 Combi pickup assembly 6 KMS8264-00 3 mm starlock 2 7 KPX6720.0 E-clip D500-0070 2 8 000.0440 M0 zp locknut 2 9 00.930 Medium DPS sling size label 2 0 200.9320 " grey hand grip 239-9365 Powered DPS medium upper frame 2 239-9370 Powered DPS medium lower frame 3 AX05700.0 M0 st/st washer (form C) 4 4 KMX82050-20 Locking clip 5 KPX20430.0 Leaf spring 6 KPX67540.0 6-8 X 6 flange bushing 2 7 KPX67640.0 Nylon friction washer 2 8 MX0460.20 Plastic cap (grey) 2 3
G3-700.936 Combi Large Powered DPS Spreader Bar (227 kg) 32
G3 Part Designations 700.936 COMBI LARGE POWERED DPS SPREADER BAR (227 KG) 00.9300 DPS water level label 2 00.9337 700.936 product number label 3 200.9348 Actuator pin 2 4 400.9300 DPS actuator 5 KMX8260-00 Combi pickup assembly 6 KMS8264-00 3 mm starlock 2 7 KPX6720.0 E-clip D500-0070 2 8 000.0440 M0 zp locknut 2 9 00.935 Large DPS sling size label 2 0 200.9320 " grey hand grip 239.933 Powered DPS medium upper frame 2 239.9336 Powered DPS medium lower frame 3 AX05700.0 M0 st/st washer (form C) 4 4 KMX82050-20 Locking clip 5 KPX20430.0 Leaf spring 6 KPX67540.0 6-8 X 6 flange bushing 2 7 KPX67640.0 Nylon friction washer 2 8 MX0460.20 Plastic cap (grey) 2 33
G4-700-9302 Stretcher Frame (60 kg) G4 700-9302 STRETCHER FRAME (60 KG) 000-00474 Washer 2 2 000-00626 Bolt Shoulder 2 3 000.03800 Locknut M8 Zinc 2 4 00-00302 Label Product 600-9302 5 00-05456 Hook Label 4 6 00-25092 Label Stretcher Use 2 7 00-253 Stretcher Sling Sizes Label 2 8 200.05466 Safety Latch 0 9 239-920 Stretcher Foldable Frame 0 239-9202 Maxi Move Stretcher Attachment 600-9450 Stretcher Cover Assembly 2 KMX82050-20 Locking Clip 3 KMX82393-00 Spring Loaded Index Bolt 4 KPX20430-00 Leaf Spring 34
G5 - KMA82334 Stretcher Frame G5 KMA82334 STRETCHER FRAME KMX82050-20 Locking clip 2 KPX20430.0 Leaf spring 3 KMX82432-00 Bolt shoulder 2 4 KMX82436-00 Nylon Washer 2 5 620044 M8 Nyloc nut 2 6 KMX82439-XX Locking attachment 7 84476 Serial number label 8 KMX8268-xx Cover assembly 9 KMX82393-00 Locking bolt 0 848640 "May only be used" label KMX82452-00 60 kg SWL label 2 KMX00260.0 Sling position label 4 3 848632 Data label 4 KMX82455-XX Folding frame 5 8459263 Rectangular retaining clip 0 35
G6 - KMA003-20 Strap Stretcher G6KMA003-20KMA003-20 STRAP STRETCHER KMX0009.20 Buckle section-right 2 KMX0000.0 Buckle plate 24 3 KMX000.0 Buckle 24 4 KMX0020.0 Hanging strap 4 5 KMX003.0 Cross strap 24 6 KMX006.20 Buckle section-left 7 KMX0080.20 End tube 2 8 KMX0020.0 Plug 4 9 KMX00200.0 Rivet 48 0 KMX00580.0 Strap guide KMX00260.0 Sling position label 4 2 KMX00270.0 Body position label 2 3 848640 "May only be used" label 4 84476 Serial number label 5 848639 Data label 36
G7 - KRA220-20 Scoop Stretcher 4 G7 KRA220-20 SCOOP STRETCHER KRX25090.0 Moving latch 2 2 KRX2500.0 Static latch 2 3 KRX250.0 Fork latch 2 4 KRX2520.0 Pin 2 5 KRX2540.0 Spiral pin 0 6 KRX2550.0 Spring 2 7 MX04200.0 Circlip 2 8 KMX0020.0 Hanging strap 4 9 848640 "May only be used" label 0 KMX00260.0 Sling position label 4 KMX00270.0 Body position label 2 2 84476 Serial number label 3 848638 Data label 4 354-05403 Optionnal W Style Strap 700-05403 2 straps kit (optionnal) 37
H - Electrical Wiring Diagram COLUMN ACTUATOR 8 Note : MAIN BOARD J5 MEM Applies to all units Applies only to units with serial number below KMC-388 P 7 PWR J9 P2 2 P P2 P3 STOP / START SWITCH 2 8 6 J2 P2 5 P HANDSET 4 J BRAKE BOARD 5 J2 P7 3 J8 P6 J 4 MEMBRANE 2 BATTERY 3 P5 P2 P3 P4 P P2 20 2 2 P4 P5 P6 P3 P7 P3 P P MICROSWITCH 6 MICROSWITCH 7 P P2 9 P2 2 P3 P2 LEG ACTUATOR 9 24 25 26 27 P SCALE 22 20 DPS MOTOR M 0 38
H ELECTRICAL WIRING DIAGRAM Part Designations & KMC * XN 492-00066-02 UMC PCB for KMC * XE 492-00066-33 UMC PCB for KMC * AN - KMC-387 See note 492-00066-0 UMC PCB for KMC * UN & KMC * XN 492-00066-34 UMC PCB for KMC * AE 492-00084-0 UMC PCB for KMC * UN 492-00084-02 UMC PCB for KMC * XE 492-00084-33 UMC PCB for KMC * AN 492-00084-34 UMC PCB for KMC * AE KMC-88-2 KKX0730-00 5 A On/Off switch NDA000-20 3 Battery Pack NDA0200-20 obsolete 4 700.3700 ArjoHuntleigh floor lift DPS LCD handset 5 492.00070 PCBA brake board - KMC-387 See note 6 KRX00640-00 Microswitch 7 KRX00430-00 Microswitch 8 400-25000 Actuator assembly 9 KRX0280-00 Double-ended actuator 0 KMX8254-00 Actuator 200.25200 Single-point load cell K5 2 00.2400 Control box membrane 3 402.25035 Motor brake control cable - KMC-387 See note 4 402.2500 Limit switches harness 5 402.25020 Handset/UMC interface harness 6 402.25030 Motor brake cable - KMC-387 See note 7 402.25005 Motor harness 8 402.2505 Fuse holder cable (contains 5 A AGC fuse #C8FAGC5) 9 402.25025 Actuator wire harness 20 402.2500 Mast short coil cable KMC-0000 KMC-02999 K5 402-25007 Mast short coil cable ESD KMC-03000-402.25000 Flexible cable for standard jib (for KMC ** N) KMC-0000 KMC-02999 K5 402.25002 Flexible cable for extended jib (for 2 ** E) 402-25004 Flexible cable for standard jib (for KMC ** N) KMC-03000-402-25006 Flexible cable for extended jib (for KMC ** E) 22 405.2080 28A2024-0A0 ferrite 23 402.25040 Scale signal cable extention 24 402-25027 Combi interface wire harness 25 402-25028 T-Bar Socket 26 KMX826-00 Pickup assembly 27 KMX8260-00 Combi pickup assembly Note: Replaced by kit K7 39
Preventive Maintenance Replacement Parts Preventative Maintenance Parts Preventive Maintenance Parts Part number Number of Maxi Move units Page 5 Band replacement kit 700-25306 5 7 Recommended Spares Recommended Spares Part number Number of Maxi Move units Page 5 Battery Pack NDA000-20 2 9 ArjoHuntleigh floor lift DPS LCD handset 700.3700 2 5 5 amp On/Off switch KKX0730-00 2 5 5A AGC fuse C8FAGC5 2 4 40 Control box membrane 00.2400 2 5 40
GETINGE GROUP is a leading global provider of products and systems that contribute to quality enhancement and cost efficiency within healthcare and life sciences. We operate under the three brands of ArjoHuntleigh, GETINGE and MAQUET. ArjoHuntleigh focuses on patient mobility and wound management solutions. GETINGE provides solutions for infection control within healthcare and contamination prevention within life sciences. MAQUET specializes in solutions, therapies and products for surgical interventions and intensive care.