Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium Cegelec GmbH Colmarer Straße 11, 60528 Frankfurt am Main for the testing laboratory Actemium Cegelec GmbH Business Unit Actemium NDS Nürnberg Gutenstetter Straße 14a, 90449 Nürnberg Tests in the fields: manual non-destructive testing (ultrasonic-, penetrant-, magnetic particle- and visual testing) and mechanized ultrasonic- and visual testing of metallic materials in the metal production and metalworking industry in constructions and trafic technology as well as in plant constractions Abbreviations used: see last page Within the given testing field marked with *), the testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, the following: the modification, development and refinement of testing methods. The listed testing methods are exemplary. The testing laboratory maintains a current list of all test-ing methods within the flexible scope of accreditation. The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/5
1 Ultrasonic testing * DIN 25435-1 DIN 54123 1980-10 DIN EN 10160 1999-09 DIN EN 10228-3 1998-07 DIN EN 10228-4 1999-10 DIN EN 12680-1 2003-06 DIN EN 12680-2 2003-06 DIN EN 12680-3 2012-02 DIN EN ISO 10893-8 DIN EN ISO 10893-9 DIN EN ISO 10893-10 DIN EN ISO 10893-11 In-service inspections for primary coolant circuit components of light water reactors - Part 1: Automated ultrasonic testing Non-destructive Test - Ultrasonic Method of Testing Claddings, Produced by Welding, Rolling and Explosion Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method) Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings Founding - Ultrasonic examination - Part 1: Steel castings for general purposes Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections Period of validity: 08.02.2016 to 07.02.2021 - Translation - 2/5
DIN EN ISO 10893-12 DIN EN ISO 16810 2014-07 DIN EN ISO 16823 2014-07 DIN EN ISO 16826 2014-06 DIN EN ISO 16828 2014-06 DIN ISO 4386-1 1992-11 DIN ISO 4386-2 1982-10 SEP 1914 1983-08 SEP 1915 1994-09 SEP 1923 2009-02 Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes Non-destructive testing - Ultrasonic testing - General principles Non-destructive testing - Ultrasonic testing - Transmission technique Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities Plain bearings - metallic multilayer plain bearings - non-destructive ultrasonic testing of bond Plain bearings - metallic multilayer plain bearings - destructive testing of bond for bearing metal layer thicknesses >= 2 mm Non-destructive testing of fusion-welded seams in pipes of stainless steels Ultrasonic testing of steel tubes for longitudinal imperfection (withdrawn document) Ultrasonic testing of steel forgings to stringent standards, in particular for components in turbine and generator systems 2 Magnetic particle testing DIN 25435-2 DIN EN 10228-1 1999-07 DIN EN ISO 9934-1 2002-03 In-service inspections for primary coolant circuit components of light water reactors - Part 2: Magnetic particle and penetrant testing Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection Non-destructive testing - Magnetic particle testing - Part 1: General principles Period of validity: 08.02.2016 to 07.02.2021 - Translation - 3/5
DIN EN ISO 10893-5 DIN EN ISO 17638 2010-03 ISO 4986 2010-03 SEP 1935 1982-06 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections Non-destructive testing of welds - Magnetic particle testing Steel castings - Magnetic particle inspection Seam testing of castings of steel - magnetic powder test (withdrawn standard) 3 Penetrant testing DIN EN 1371-2 2015-04 DIN EN 10228-2 1998-06 DIN EN ISO 3452-1 2014-09 DIN EN ISO 10893-4 DIN ISO 4386-3 1992-11 SEP 1936 1982-06 Founding - Liquid penetrant testing - Part 2: Investment castings Non-destructive testing of steel forgings - Part 2: Penetrant testing Non-destructive testing - Penetrant testing - Part 1: General principles Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections Plain bearings - metallic multilayer plain bearings - non-destructive penetrant testing Seam testing of castings of steel - penetration testing 4 Visual testing DIN 25435-4 DIN EN 13018 2001-07 In-service inspections for primary collant circuit components of light water reactors - Part 4: Visual testing Non-destructive testing - Visual testing - General principles Period of validity: 08.02.2016 to 07.02.2021 - Translation - 4/5
DIN EN ISO 17637 2011-05 Non-destructive testing of welds - Visual testing of fusion-welded joints 5 Method Cross-standards for NDT (here for: UT, MT, PT und VT) KTA 3201.4 2010-11 KTA 3401.4 1991-06 AD 2000-Merkblatt HP 5/3 2011-05 Components of the reactor coolant pressure boundary of light water reactors - Part 4: Inservice inspections and operational monitoring Reactor containments of steel - Part 4: Inservice inspections Manufacture and testing of joints - Non-destructive testing of welded joints Abbreviations used: AD-HP KTA SEP MT PT UT VT Working group of pressure vessels - Production and testing Nuclear Safety Standards Commission Steel and iron test sheet of the Association of German Steel Institute Magnetic particle testing Leak tests Ultrasonic testing Visual testing Period of validity: 08.02.2016 to 07.02.2021 - Translation - 5/5