Series 7100 Flow-Lift Piston Check Valve

Series 7100 Flow-Lift Piston Check Valve Award-Winning Design: Feature-packed valve provides solutions for gas, air or liquid systems The Norriseal Series 7100 Piston Check Valve* is designed for the prevention of backflow in gas, air or liquid systems. Norriseal s expertise in the design of piston balanced control valves has introduced new concepts to the piston check valve industry. The piston check valve, with its award-winning design, has been installed in critical services around the world. Working Pressures ANSI Class 10 thru 2,00 API,000 and 10,000 Features No-slam closing No special tool required to change seat Low pressure drop High Cv values Smooth opening Special trims for abrasive and corrosive services Built-in lifting device for piston removal and inspection PTFE self-lubricating piston seal Low maintenance costs Contents 2 Assemblies 2 Operation & Installation Special Features Materials 6 Flow Characteristics 7 Specifications 8 How to Order Applications Air and gas compressor service Gas or liquid pipe lines Oil and gas production leases Pulsating flows Safety systems * Received the Special Meritorious Award for engineering innovation at the 1981 Offshore Technology Conference in Houston, Texas. Engineered Performance

2 Assemblies Valve Assembly

Operation & Installation Operation Normal. Flow is directed under the valve piston and lifts it upward. When flow is stopped, the piston descends, closing the valve to prevent flow reversal. Stabilized/non-slam piston. Pulsating flow through the valve, if unrestricted, would cause the piston to follow the rapidly cycling line pressure, resulting in vibration, chattering and possibly slamming of the piston. The ball check and orifice plug built into the piston are to prevent this from happening. (Fig. 1) As the piston rises, the pressure in the PTFE sealed cavity above the piston increases, forcing open the ball check. This reduces the cavity pressure and allows the piston to rise smoothly. As the pressure and flow decrease, the piston moves downward. The ball check closes, and descent of the piston is restricted by fluid flowing through the orifice plug. This equalizes the pressure in the cavity above and below the piston and gives stability to the valve. Installation Valves.00 and smaller may be installed in a vertical position. Warning: 6.00 and larger valves should NOT be installed in a vertical plane. If a vertical plane is required, please consult factory for special accessories. Application Compressible fluids. Valves come with ballcheck and orifice plug in piston. Non-compressible fluids. Valves furnished same as for compressible fluids; however, some applications where heavy, viscous liquids are present, the ball check should be removed so piston can stabilize quicker. BALL CHECK ORIFICE PLUG Figure 1

Special Features PTFE Piston Seal Ring Norriseal s use of a PTFE spring energized seal ring adds a new dimension to the piston check valve. By use of a full circle ring, leakage between piston and guide/cage is zero. Using a low friction, self-lubricating material allows the piston to move freely and quietly without seizing to the seal. Guide/Cage This feature by Norriseal provides positive piston and seat alignment which helps prevent piston vibration and assures stability for proper flow control. Valve Spring Furnished on all valves. This gives an added safety feature for shut-off in all pressure ranges. Seat Cage Retained Type Held in position by guide/cage requiring no special tools for removal and can be easily removed by hand. Optional Trim For applications where a positive seal with a zero leakage is required, composition seating material is available. This style piston has the feature of a metal back-up in case of wash-out of the composition trim. (Fig. ) Abrasive resistant metal trim sets are available for special applications. Please consult factory. (Fig. ) NACE Optional trim available that meets MR017 recommended practice. (See Materials of Construction) Easy Maintenance Norriseal s valve piston comes with a built-in lifting device. No special fittings or tools are required to remove the piston from the valve body. 19 1 10 11 12 1 6 17 16 7 18 9 1 8 20 Item No 1 2 2A 2B 6 7 8 9 10 11 12 1 1 1 16 17 18 19 20 Description SEAT Valve PISTON Valve Solid BUTT Piston Valve RETAINER Piston Valve INSERT Piston Valve SCREW Retainer Piston O-Ring Insert CAGE Piston Valve GUIDE Piston Valve SPRING Valve PLUG Orifice SEAT Ball Check CAGE Ball Check SPRING Ball Check BONNET GASKET Bonnet GASKET Guide GASKET Seat STUD Bonnet w/nut SCREW Lifting NUT Hex Ring SEAL Piston Guide BALL Check PLUG Pipe BODY Figure 2 Note: Figure shows piston with replaceable inserted material 1 2 2E 2B Figure 2A 2D 2C

Materials MATERIALS OF CONSTRUCTION Items Valve Size (inches) Material Standard NACE MR017 Optional Body 1.00-12.00 ASTM A216, GR. WCC ASTM A216, GR. WCC Bonnet 1.00-12.00 Valve Piston ASTM A16, GR 70 or ASTM A216, GR. WCC 1.00 -.00 17-PH SST/H900 6.00-12.00 17-PH SST/H110-M ASTM A16, GR 70 or ASTM A216, GR. WCC ASTM A1, GR CF8A ASTM A2, GR. LCC 16 SST 16 SST Valve Seat 1.00-12.00 17-PH SST/H110-M 16 SST 16 SST Piston Insert (Optional) Valve Cage Piston Guide Piston Seal Ball Check Assembly Valve Spring Seat 1.00-12.00 Glass-Filled PTFE Glass-Filled PTFE Alloy 6 1.00, 2.00,.00,.00 17-PH SST/H110-M 17-PH SST/H110-M 16 SST 1.0 16 SST 16 SST 17-PH SST/H110-M 6.00, 8.00 16 SST 16 SST 17-PH SST/H110-M 10.00, 12.00 17-PH SST/H110-M 17-PH SST/H110-M 16 SST 1.00 17-PH SST/H110-M 17-PH SST/H110-M 16 SST 1.0-8.00 16 SST 16 SST Consult Factory 10.00, 12.00 N/A N/A N/A 1.00 None None None 1.0-8.00 TFE/ELG Ring TFE/ELG Ring Fluor.-K/ELG Ring 10.00, 12.00 C.G Filled Ring w/buna-n O-ring C.G Filled Ring w/viton O-ring Consult Factory 1.00 None None None 16 SST 16 SST Cage 16 SST 16 SST 1.0-12.00 Ball 02 SST 02 SST Spring Inconel 600 Inconel 600 1.00,.00 Inconel 600 Inconel 600 2.00-12.00 16 SST Inconel 600 Consult Factory Consult Factory Bonnet Studs 1.00-12.00 ASTM A19, GR. B7 ASTM A19, GR. B7 Consult Factory Hex Nuts 1.00-12.00 ASTM A19, GR. 2H ASTM A19, GR. 2H Consult Factory Spiral Wound Gaskets 1.00-12.00 Solid Metal Gaskets (ANSI 200 and up) Composition Gaskets (Non-ASB) Orifice Plug Piston Lifting Attachment 16L SST w/graphite Filler Inconel 600 w/graphite Filler Consult Factory 1.00-12.00 16 SST 16 SST Consult Factory 10.00 (ANSI 10-600) Synthetic Fiber w/nitrile Binder Synthetic Fiber w/nitrile Binder Graphite/Fiberglass 1.00 None None None 1.0-12.00 16 SST 16 SST Consult Factory 1.00 None None None 1.0 -.00 0 SST 0 SST 6.00, 8.00 02/0 SST 02/0 SST 10.00, 12.00 0/16 SST 0/16 SST 16 SST Nameplate 1.00-12.00 16 SST 16 SST Consult Factory Bonnet Vent Plug 1.00-12.00 CSTL/ASTM A10 CSTL/ASTM A10 16 SST Lifting Attachments (Eye Bolts) 1.00-2.00 None None None 1.00-12.00 Forged Alloy Steel Forged Alloy Steel Consult Factory

6 Flow Characteristics 100 90 80 70 60 0 0 Pressure Drop vs Flow for Norriseal Series 7100 Piston Check Valves DIFFERENTIAL PRESSURE (PSI) 0 20 10 98 7 6 1.00 Valve 1.0 Valve 2.00 Valve.00 Valve.00 Valve 6.00 Valve 8.00 Valve 10.00 Valve 12.00 Valve 2 1 10 20 0 0 0 60 70 80 90 100 200 00 00 00 600 700 800 900 1000 2000 000 000 000 6000 7000 8000 9000 10000 20000 WATER FLOW (GPM) AT 60 F Note: Dotted potion of curves indicates flow with valve spring removed. Flow (Water S.G. = 1.0) vs. Pressure Drop (psi) For liquids other than water multiply by 1/ S.G. For barrels per day multiply gpm by. Flow Coefficients (Cv) for Fully Open Valves Valve Size Cv 1.00 16 1.0 2.00 70.00 128.00 198 6.00 0 8.00 880 10.00 1200 12.00 1900 The following formulas may be used to determine the actual flow coefficient (Cv) required by a given condition of flow. 1. Liquid Cv = Q Q = Cv 2. Gas Q Cv = 96 Q = 96Cv G P G P GT ( P) (P 1 + P 2 ) ( P) (P 1 + P 2 ) GT Glossary of Terms Q = Flow Liquids GPM Gas SCFH Cv = Flow Coefficient P 1 = P 2 = P = T = G = Inlet Pressure (PSIA) Outlet Pressure (PSIA) P 1 P 2, Pressure Drop [Critical flow (gas) use 1 2 P 1 for P 2 if P 2 is less than 1 2 P1] Absolute Temperature ( F + 60) Specific Gravity

Specifications 7 DIMENSIONS (inches) Body Size NPT + Butt- Weld + Socket -weld + 1.00 8.2 8.2 8.2 1.0 1.00 1.00 1.00 2.00 11.2 11.2 11.2.00 CF CF.00 CF CF 6.00 CF 8.00 CF 10.00 CF 12.00 CF End Connection Type ANSI Flanged Flange Type 10 00 600 900 100 200 RF 7.2 7.7 8.2 9.8 9.8 N/A RTJ 7.7 8.2 8.2 9.8 9.8 N/A RF 8.7 9.2 9.88 12.2 12.2 N/A RTJ 9.2 9.7 9.88 12.2 12.2 N/A RF 10.00 10.00 11.2 1.7 1.7 16.88 RTJ 10.0 11.12 11.8 1.88 1.88 17.00 RF 11.7 12.0 1.2 1.0 18.12 22.7 RTJ 12.2 1.12 1.8 1.62 18.2 2.00 RF 1.8 1.0 1.0 17.00 20.88 26.0 RTJ 1.8 1.12 1.62 17.12 21.00 26.88 RF 17.7 18.62 20.00 2.00 27.7 6.00 RTJ 18.2 19.2 20.12 2.12 28.00 6.0 RF 21.8 22.8 2.00 29.00 2.7 0.2 RTJ 21.88 2.00 2.12 29.12.12 0.88 RF 2.0 2.0 1.00.00 9.12 C/F RTJ 2.00 2.12 1.12.12 9.8 C/F RF 29.00 0.0 2.2 0.00.0 C/F RTJ 29.8 1.00 2.8 0.12.12 C/F * For face-to-face dimensions other than those listed above, ie. API 6D, please consult factory + ANSI 100 C.L. Pressure Rating Valve Size ANSI Class D E 1.00 10-100 7.7.06 1.0 2.00.00.00 6.00 8.00 10.00 12.00 BODY HEIGHT DIMENSIONS 10-600 9.7.0 900-100 10.0.00 10-100 12.12.8 200 1.12.2 10-900 1.0.0 100 16.88 6.2 200 2.12 7.62 10-900 18.8 7.00 100 19.8 7.0 200 2.12 7.62 10-600 20.7 7.0 900-100 2.00 8.62 200 0.00 10.0 10-600 26.0 9.00 900 27.88 10.8 100 & 200 9.00 12.7 10-600.00 11.6 900 6.2 11.9 100 9.7 1.00 10-00 7.12 12.00 600 8.0 12.7 900 0.12 1.0 100.9 1.7 STANDARD BODY END CONNECTIONS** Body Size NPT Butt Weld Socket Weld Flanged (ANSI Ratings) 1.00 * * * 10-100 1.0 * * * 10-100 2.00 * * * 10-200.00 * * 10-200.00 * * 10-200 6.00 * 10-200 8.00 * 10-200 10.00 * 10-200 12.00 * 10-200 * For 10.00 and 12.0 ANSI 200 Class C/F **For valve body end connections other than those listed and higher pressure ratings, please consult factory. D E F F/2

8 How to Order BODY RATING ANSI 10 02 00 07 00 09 600 1 900 21 100 6 200 60 000 0 1 10,000 100 1 1 Limited Availability BODY CONNECTIONS Type Screwed (Female) NPT S ANSI Flanged Raised Face RF ANSI Flanged Ring Type Joint RJ Beveled Buttweld B 2 Socketweld W 2 API Flanged Ring Type Joint AJ 2 Specify schedule SERVICE CODE Body, Bonney WCC Standard (General Serv.) - WCC NACE Spec. (MR017) N 16 SST S VALVE SPRING MATERIAL Type 16 SST (Horizontal) R Inconel (Horizontal) L 16 SST (Vertical) V Inconel (Vertical) W NACE MR017 Suitable BODY CONFIGURATION Configuration Norriseal F-F (ISA) - Non-Std. F-F (Not ISA or API) C Consult factory for non-standard F-F applications 1. Determine required body size. 2. Use model number code below as illustrated to select proper valve type to suit operating conditions. S - 6RGS - AEA D G S N A B NACE MR017 Suitable BODY STYLE Flow Pattern Globe w/bottom Drain (Standard 10 and larger) Globe w/o Bottom Drain (Standard 8 and smaller) GASKETS (SPIRAL WOUND) FLUID TYPE PISTON SEAL MATERIAL TRIM MATERIAL Fluid 16 SST/Grafoil Inconel 600/Grafoil Fluid Gas or Air Liquid Material E PTFE/Elgiloy F Buna w/tfe Rider (>8.00 ) G Viton w/tfe Rider (>8.00 ) K Fluoroloy K (>8.00 ) J Carbon-Graphite O No Seal (1.00 ) Piston Seat Cage Guide A 17-PH 17-PH 17-PH 16 SST B 16 SST 17-PH 17-PH 16 SST C 16 SST 16 SST 16 SST 16 SST E 16/STEL 16/STEL 16 SST 16 SST J 16/TFE 17-PH 17-PH 17-PH L 16/TFE 16 SST 16 SST 16 SST T 17-/TFE 17-PH 17-PH 16 SST Z 17-/UHMW 17-PH 17-PH 16 SST For specific trim combinations per size, refer to Materials of Construction chart on page. Please note: not all available options are shown. In Canada contact: Engineered Performance Tel: 71 66 2 Fax: 71 896 786 www.norriseal.com Tel: (780) -866 Fax: (780) -267 www.albertaoiltool.com 201 Dover Corporation/Norriseal and its affiliates. This manual, including all text and images, is a copyrighted work of Dover Corporation/Norriseal and its affiliates. It may not be, in whole or in part, photocopied, scanned, or otherwise reproduced, revised, or publicly displayed, without prior written permission from Norriseal. This manual is for use only with the new Norriseal valves and/or controllers listed in the manual. It may not be distributed with, and is not for use with, any remanufactured products. Due to the continuous improvement program at Norriseal, specifications and/or prices are subject to change without notice or obligation. All trademarks contained herein are the property of their respective owners. 7100-061T