General Applications Axle Types 00-000 Lbs. Capacity Complete service manual Precision machined, forged steel spindles Precision machined integral cast iron hub/drums -bolt and bolt (UTG) hubs available Standard grease; optional oil bath; E-Z Lube or Nev-R-Lube option Press-in wheel studs (-bolt) " x " electric brakes, CSA approved at 000 lbs, " x " hydraulic brakes rakes are available with and without parking feature Hydraulic free backing brakes available Hydraulic brakes - uni-servo and duo-servo available d0 & D0 leaf spring High quality alloy steel springs in a variety of capacities Single, tandem, or triple axle assemblies with equalized suspensions Slipper spring or double eye leaf spring suspension Optional hanger and attaching parts kits available Durable, wear-resistant components Inner wiring system for easier installation and protection of brake wiring Heavy wall " diameter tube Straight or Drop spindles (" drop only) year limited warranty Totally rubber-cushioned for smooth, quiet, independent ride Easy installation with less maintenance Less transfer of road shock which insulates cargo from road shocks and vibration Self-damping action Load-carrying cross member Rubber cords compounded for maximum dependability and durability Independent wheel suspension system year limited warranty on suspension system Low profile for maximum road clearance Various starting angles to control trailer height High and low profile brackets with optional mounting brackets are available Rubber cushioning eliminates metal-to-metal contact Shock absorption provided by the natural hysteresis of rubber Single or tandem axle assemblies Durable, wear-resistant components CAUTION: Triple axle assemblies are NOT recommended for Torflex axles. 00-000 lbs. capacity
Torflex Application Information 00-000 lbs. capacity Start Angle Down Articulation Dimensions Dimensions are for top mount only. Side mount is." higher. Allow " bump clearance from full load. racket Profile Forward No Load Full Load Shock Load H L H L H L Low...0..0. High.99..0..0. Left Hand Assembly Shown DEXTER Arm Length Axle Location L H Top of racket Center of Spindle Start Angle. Down 0 Down Low.0..00.00 0.9.9 High.0...00..9 Low.0.9 0.0. -0.0. High.9.9.. 0.. # Overhang Per Side Spindle Min. Max. Short.00".0" Standard.0".0" 0 Low.00.00-0.0. -..0 High..00 0.. -0..0 0 Up. Up Low 0.9.9 -..0 -.0. High..9-0..0 -.0. Low -0.0. -.. -.9. High 0.. -.9. -.. Note: Positive numbers in the H column indicate the spindle is ELOW the top of the bracket. Conversely, negative numbers are AOVE the top of the bracket. Full Load Dimensions Dimensions are for low profile, top mount only. High profile brackets are." higher. Side mount is." higher. Allow " bump clearance from full load. Top of racket C H E D Top of racket C H E D C Top of racket H E D 0 DN, 0 0 Up,. Up. Dn, Dn Start Angle * * * Down. Down 0 Down 0 0 Up. Up Tire D E H C H C H C H C H C H C LT/R......0.. 0..0. -0..0. -... -....0-LT.9.. 9...0.9. 0...0-0...0 -...9 -...9 9.0-.LT.... 0.9.0.. 0... -0... -..9. -..9. Columns D and E are dimensional examples only: * D Static Loaded Radius ** E Inflated Radius
Torflex Application Information racket Dimensions Forward For Wiring Access olt Size J A G Right Hand Side of Axle Shown C A D E Low Profile F / G 00-000 lbs. capacity Side Mount Hanger # racket Dimensions Low High A...0.0 C 9.0 9.0 D 9.00 9.00 E.00.00 F.. G.0.0 J.0.0 N ----.0 P ----.00 Q ----.00 olt Size ⁵ ₈" bolt Tube Size.0.0 P E F N High Profile Q
Leaf Spring Application Information 00-000 lbs. capacity Double Eye Springs For Standard " Axle Spacing Single A/P--00 Tandem A/P--00 Triple A/P--00 Spring Length " " " A 9..0..00.0 9.0 C..00.00 D 0..00.00 E..00.00 For Optional " Axle Spacing Tandem A/P--00 Triple A/P--00 Spring Length " " ".00.0 0.0 C 0.0.00.00 D 0..00.00 E 0.0.00.00 D0 Overhang Per Side Min. Disc.* Max. Straight." 9.00" 0.00" " Drop." N/A 9.0" Nev-R-Lube.9" 9.00" 0.00" * Minimum overhang with disc brakes D0 Overhang Per Side Min. Max. Straight." 9.00" " Drop." 9.00" Nev-R-Lube." 9.00" Z Y SLR Forward H Z Y SLR D E H Z Y SLR C D A H D C C Double Eye Axle Assemblies Hanger Kits Quantity Per Kit Part No. Description Height HGR-0-00 HGR-0-00 HGR--00 HGR-9-00 HGR--00 0-00-00 Hanger." ---- 0-00-00 Front Hanger." ---- ---- ---- ---- 09-00-00 Front Hanger.0" ---- ---- ---- ---- 09-0-00 Center Hanger." ---- ---- ---- 00-00-00 Rear Hanger.9" ---- ---- ---- Attaching Parts Kits Part No. Description A/P--00 A/P--00 A/P--00 A/P--00 A/P--00 00-09-0 Flange Locknut 00--00 Shackle olt 0 0 0-0-0 Equalizer ---- ---- ---- 0-0-0 Equalizer ---- ---- ---- ---- 0--0 Equalizer ---- ---- ---- 0--0 Equalizer ---- ---- ---- ---- 0-0-00 Shackle Link ---- 0-0-00 Shackle Link, Long ---- ---- ---- ---- 0-00-00 Shackle Link Assembly ---- 0-0-00 Shackle Link Assembly, Long ---- ---- ---- ---- For " axle spacing using " springs
Leaf Spring Application Information Z Y Z Y Z Y SLR SLR SLR D D A H H H C Forward E Slipper Springs Single Tandem Triple A/P-0-00 A/P-0-00 A/P--00 A/P-0-00 A/P--00 A.0 ---- ---- ---- ---- ----. 0.. 0. C ----..0..0 D..... E ---- ---- ----.0.0 Note: All " wide slipper springs For." axle spacing For " axle spacing A,, E Hanger Spacing C Axle Spacing D Axle Location H Center of Spindle Y Frame Height Z Top of Tire to ottom of Frame SLR Static Load Radius To determine these values, contact your local sales engineer or distributor to run ProSpec. 00-000 lbs. capacity D C E Slipper Spring Axle Assemblies Hanger Kits Quantity Per Kit Part No. Description Height HGR-0-00 HGR-0-00 HGR-0-00 0-00-00 Front Hanger." 09-00-00 Center Hanger.0" ---- 00-0-00 Rear Hanger.00" Attaching Parts Kits Part No. Description A/P-0-00 A/P-0-00 A/P--00 A/P-0-00 A/P--00 00-00-0 ⁹ ₁₆- Locknut 00-0-00 Keeper Nut 00--00 Equalizer Nut ---- 00-00-0 Equalizer olt ---- 00-00-00 Keeper olt 00-0-00 Spring Eye olt 0-00-00 Equalizer ---- ---- ---- 0-0-0 Equalizer ---- ---- ---- For." axle spacing For " axle spacing Some combinations of hangers and spring mountings may result in insufficient bump clearance. Refer to the Miscellaneous section for additional hanger kits, A/P kits, or other tires.
and Demountable Hub Group 00-000 lbs. capacity Exp000_- 0 0 A A A Grease Lube Parts Item Part No. Description 00-0-00 Grease Seal." 00-0-00 E-Z Lube Seal." 0-00-0 0 Inner earing Cone 0-00-0 0 Inner earing Cup 0-0-0 Outer earing Cup - Hub A 0-09-0 Outer earing Cup - Demountable 0-0-0 A Outer earing Cone - Hub A 0-09-0 Outer earing Cone - Demountable 00--00 Spindle Nut 09-00-00 Cotter Pin (not used with E-Z Lube ) 0-09-00 Grease Cap - Hub A 0-00-00 Grease Cap - Demountable 0-0-0 Grease Cap for E-Z Lube - Hub 0-0-0 Grease Cap E-Z Lube Chrome Option - Hub C 0-0-0 Grease Cap for E-Z Lube - Demountable C 0-0-0 Grease Cap for E-Z Lube Chrome Option - Dem. D 0-00-00 E-Z Lube Rubber Plug 9 00-0-00 Spindle Washer 00-00-00 ⁹ ₁₆- Nut for Rim Clamp 0-00-00 Rim Clamp 9 00-9-00 Special Jam Nut for E-Z Lube (after 00) 0 00-90-00 Spindle Nut Retainer for E-Z Lube (after 00) Oil Lube Parts Item Part No. Description 00-0-00 Oil Seal." 0-00-0 0 Inner earing cone 0-00-0 0 Inner earing Cup 0-0-0 Outer earing Cup - Hub 0-09-0 Outer earing Cup - Demountable 0-09-0 Outer earing Cone 0-0-0 A Outer earing Cone 00--00 Spindle Nut 09-00-00 Cotter Pin E 0-0-00 Oil Cap - Hub ns 0-00-00 Oil Cap - Demountable F 0-0-00 Oil Cap Plug 9 00-0-00 Spindle Washer 0-0-00 Oil Filler Plug - and Demountable ns 0-0-00 Oil Cap Plug 00-00-00 ⁹ ₁₆- Nut for Rim Clamp 0-00-00 Rim Clamp 00-0-00 O Ring ns 00-09-00 Demountable O Ring Note: Spindle is not available for resale. on. hubs are available on these axles. See section in 000-000 lbs. capacity. C D 9 9 0 E F D Hubs rakes Item Part No. Description olt Circle Hubs/Drums 00--0 Grease ⁹ ₁₆" Stud Demountable 00--0 Oil ⁹ ₁₆" Stud Demountable 00-9-0 Grease ¹ ₂" Stud on.0 00-9- Grease ⁹ ₁₆" Stud on.0 00-9- Grease ⁵ ₈" Stud on.0 00-9-09 Oil ¹ ₂" Stud on.0 00-9-0 Oil ⁹ ₁₆" Stud on.0 00-9- Oil ⁵ ₈" Stud on.0 Plain Hubs 00--09 Grease ¹ ₂" Stud on.0 00-- Grease ⁹ ₁₆" Stud on.0 00--0 Grease ⁵ ₈" Stud on.0 00-- Oil ¹ ₂" Stud on.0 Item Part No. Description 0 K-0-00/K-0-00 LH/RH Electric K ns K--00/K--00 LH/RH Electric w/park ns K--00/K--00 LH/RH Electric K CSA ns K--00/K-9-00 LH/RH Electric K CSA w/park ns K-0-00/K--00 LH/RH Electric K ns K--00/K-9-00 LH/RH Hydraulic Uni-servo K ns K--00/K--00 LH/RH Hydraulic Uni-servo K w/park ns K--00/K--00 LH/RH Hydraulic Duo-servo K ns K--00/K--00 LH/RH Hydraulic Duo-servo K w/park ns K--00/K--00 LH/RH Hydraulic Uni-servo K F ns K-0-00/K--00 LH/RH Hydraulic Uni-servo K F w/park ns K--0/K--0 LH/RH Hydraulic Uni-servo K F ns K-0-0/K--0 LH/RH Hydraulic Uni-servo K F w/park ns K--00/K-9-00 LH/RH Electric Nev-R-Adjust ns K--00/K--00 LH/RH Electric K CSA Nev-R-Adjust Studs & Wheel Nuts Item Part No. Description 0 0-0-00 ⁹ ₁₆- Stud - UTG 00--00 ½-0 x. Long Press-in Stud* (hubs before /0) 00--00 ½-0 x.0 Long Press-in Stud* (hubs after /0) 00-00-00 ½-0 0 Cone Nut ns 00--00 ⁹ ₁₆- Press-in Stud ns 00-0-00 ⁹ ₁₆- 0 Cone Nut ns 00--00 ⁵ ₈- Press-in Stud ns 00-09-00 ⁵ ₈- 0 Cone Nut ns - not shown * Stud length measured under head to end of stud.
and Nev-R-Lube Hub Group Exp000nvr_- 0 00-000 lbs. capacity Nev-R-Lube Parts Item Part No. Description ns 00--0 Spindle Washer, mm 00-9-00 Spindle Washer, 0mm 00--00 Spindle Nut 09-00-00 Washer, Torque Label 09-09-00 Snap Ring ns 0-0-00 Grease Cap, mm 0-0-00 Grease Cap, 0mm " x " rakes Item Part No. Description 0 K-0-00/K-0-00 LH/RH Electric ns K-0-00/K--00 LH/RH Electric K ns K--00/K-9-00 LH/RH Hydraulic Uni-servo, K ns K--00/K--00 LH/RH Hydraulic Uni-servo w/park, K ns K--00/K--00 LH/RH Hydraulic Duo-servo, K ns K--00/K--00 LH/RH Hydraulic Duo-servo w/park, K ns K--00/K--00 LH/RH Hydraulic Free acking, K ns K-0-00/K--00 LH/RH Hydraulic K F w/park ns K--00/K--00 LH/RH Electric K CSA ns K--00/K-9-00 LH/RH Electric Nev-R-Adjust ns K--00/K--00 LH/RH Electric K CSA Nev-R-Adjust ns - not shown Note: Spindle is not available for resale. Hubs With earing and Wheel Studs Item Part No. Description olt Circle ns 00--0 Hub and Drum includes: on.0 00--00 ¹ ₂-0 Press-in Studs 0-0-0 mm earing Cartridge 09-09-00 earing Retainer 00-- Hub and Drum includes: on.0 00--00 ¹ ₂-0 Press-in Studs 0-0-0 0mm earing Cartridge 09-09-00 earing Retainer ns 00-- Hub and Drum includes: on.0 00--00 ⁹ ₁₆- Press-in Studs 0-0-0 0mm earing Cartridge 09-09-00 earing Retainer ns 00--0 Hub and Drum includes: 00--00 ⁵ ₈- Press-in Studs 0-0-0 0mm earing Cartridge 09-09-00 earing Retainer on.0 Wheel Nuts Item Part No. Description 00-00-00 ½-0 0 Cone Nut ns 00-0-00 ⁹ ₁₆- 0 Cone Nut ns 00-09-00 ⁵ ₈- 90 Cone Nut 9
" x " Electric rake 00-000 lbs. capacity 9 0 X_K_9-09 CSA approved at 000#/. SLR Electric rake 000# (CSA 00#) 0 K-0-00 LH Complete rake Assembly 0 K-0-00 RH Complete rake Assembly (shown) 0-09-0 acking Plate Assembly 0-0-0 LH Actuating Lever Arm Assembly 0-0-0 RH Actuating Lever Arm Assembly 0-00-00 Wire Clip 0-009-00 Retractor Spring K-0-00 Shoe & Lining Kit Contains: #00-0-00 Primary Shoe & Lining #00-0-00 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup 0-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-0-00 Magnet Kit Contains: #0--00 Magnet (white wire) #0-009-00 Magnet Clip #0-00-00 Magnet Spring 9 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet 00-0-00 Anchor Post Washer * 00-9-00 Nut Washer Assembly * Not included with complete brake assembly. Item sold separately. Electric rake 000# (CSA 000#) 0 K--00 LH Complete rake Assembly 0 K--00 RH Complete rake Assembly 0-09-0 acking Plate Assembly 0-0-0 LH Actuating Lever Arm Assembly 0-0-0 RH Actuating Lever Arm Assembly 0-00-00 Wire Clip 0-009-00 Retractor Spring K--00 Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup 0-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-0-00 Magnet Kit Contains: #0--00 Magnet (white wire) #0-009-00 Magnet Clip #0-00-00 Magnet Spring 9 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet 00-0-00 Anchor Post Washer * 00-9-00 Nut Washer Assembly These brakes are rated to a maximum capacity of 000 lbs. / pair 0
" x " Electric rake With Parking Feature 9 0 XEPF_9-09 CSA approved at 000#/. SLR 9 00-000 lbs. capacity Electric Parking rake 000# (CSA 00#) 0 K--00 LH Complete rake Assembly 0 K--00 RH Complete rake Assembly (shown) 0-0-0 LH Actuating Lever Arm Assembly 0-0-0 RH Actuating Lever Arm Assembly 0-00-00 Wire Clip K-0-00 Shoe & Lining Kit Contains: #00-0-00 Primary Shoe & Lining #00-0-00 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup 0-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-0-00 Magnet Kit Contains: #0--00 Magnet (white wire) #0-009-00 Magnet Clip #0-00-00 Magnet Spring 9 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet * 00-9-00 Nut Washer Assembly 0 0-09-0 LH acking Plate Assembly Complete (includes #-) 0 0-09-09 RH acking Plate Assembly Complete (includes #-) 0-09-0 LH acking Plate Assembly 0-09-0 RH acking Plate Assembly 09-0-00 LH Pivot Pin & Cam Sub-Assembly 09-0-00 RH Pivot Pin & Cam Sub-Assembly 09-0-00 LH Actuating Cam 09-09-00 RH Actuating Cam 0-0-00 Anchor Post & ushing Sub-Assembly 00-0-00 Anchor Post Locknut 00-0-00 Washer 00-0-00 Pivot Pin Locknut 0-00-00 Parking rake Lever 9 0-00-00 Retractor Spring * Not included with complete brake assembly. Item sold separately. Electric Parking rake 000# (CSA 000#) 0 K--00 LH Complete rake Assembly 0 K-9-00 RH Complete rake Assembly 0-0-0 LH Actuating Lever Arm Assembly 0-0-0 RH Actuating Lever Arm Assembly 0-00-00 Wire Clip K--00 Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup 0-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-0-00 Magnet Kit Contains: #0--00 Magnet (white wire) #0-009-00 Magnet Clip #0-00-00 Magnet Spring 9 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet * 00-9-00 Nut Washer Assembly 0 0-09-0 LH acking Plate Assembly Complete (includes #-) 0 0-09-09 RH acking Plate Assembly Complete (includes #-) 0-09-0 LH acking Plate Assembly 0-09-0 RH acking Plate Assembly 09-0-00 LH Pivot Pin & Cam Sub-Assembly 09-0-00 RH Pivot Pin & Cam Sub-Assembly 09-0-00 LH Actuating Cam 09-09-00 RH Actuating Cam 0-0-00 Anchor Post & ushing Sub-Assembly 00-0-00 Anchor Post Locknut 00-0-00 Washer 00-0-00 Pivot Pin Locknut 0-00-00 Parking rake Lever 9 0-00-00 Retractor Spring These brakes are rated to a maximum capacity of 000 lbs. / pair
" x " Nev-R-Adjust Electric rake 00-000 lbs. capacity 9 x_nev-r-adj_9-09 CSA approved at 000#/. SLR 0 Electric rake 000# 0 K--00 LH Complete rake Assembly 0 K-9-00 RH Complete rake Assembly (shown) 0-09-0 acking Plate Assembly 0-0-0 LH Actuating Lever Arm Assembly 0-0-0 RH Actuating Lever Arm Assembly 0-00-00 Wire Clip 0-009-00 Retractor Spring K--00 LH Shoe & Lining Kit Contains: #00-0-00 Primary Shoe & Lining #00-0-0 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K--00 RH Shoe & Lining Kit Contains: #00-0-00 Primary Shoe & Lining #00-0-0 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K-9-00 LH & RH rake Adjuster Kit Contains: #0-9-00 Adjusting Screw Spring #0-0-00 LH Lever Spring #0--00 RH Lever Spring #0-0-00 LH Adjuster Assembly #0-0-00 RH Adjuster Assembly #0--00 Adjuster Cable #0-9-00 Hook for Cable #0-0-0 LH Adjusting Lever #0-0-0 RH Adjusting Lever K-0-00 Magnet Kit Contains: #0--00 Magnet (white wire) #0-009-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 9 0-0-00 Wire Grommet 0 00-0-00 Anchor Post Washer * 00-9-00 Nut Washer Assembly * Not included with complete brake assembly. Item sold separately. Electric rake 000# (CSA 000#) 0 K--00 LH Complete rake Assembly 0 K--00 RH Complete rake Assembly (shown) 0-09-0 acking Plate Assembly 0-0-0 LH Actuating Lever Arm Assembly 0-0-0 RH Actuating Lever Arm Assembly 0-00-00 Wire Clip 0-009-00 Retractor Spring K--00 LH Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--0 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K--00 RH Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--0 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K-9-00 LH & RH rake Adjuster Kit Contains: #0-9-00 Adjusting Screw Spring #0-0-00 LH Lever Spring #0--00 RH Lever Spring #0-0-00 LH Adjuster Assembly #0-0-00 RH Adjuster Assembly #0--00 Adjuster Cable #0-9-00 Hook for Cable #0-0-0 LH Adjusting Lever #0-0-0 RH Adjusting Lever K-0-00 Magnet Kit Contains: #0--00 Magnet (white wire) #0-009-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 9 0-0-00 Wire Grommet 0 00-0-00 Anchor Post Washer * 00-9-00 Nut Washer Assembly
" x " K Electric rake 9 0 X_K_-0 CSA approved at 000#/. SLR 00-000 lbs. capacity Electric rake 000# 0 K-0-00 LH Complete rake Assembly 0 K--00 RH Complete rake Assembly (shown) 0-09-0 acking Plate Assembly 0-0-0 LH Actuating Lever Arm Assembly 0-0-0 RH Actuating Lever Arm Assembly 0-00-00 Wire Clip 0-009-00 Retractor Spring K--00 Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup 0-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K--00 Magnet Kit Contains: #0--00 Magnet (black wire) #0-009-00 Magnet Clip #0-00-00 Magnet Spring 9 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet 00-0-00 Anchor Post Washer * 00-9-00 Nut Washer Assembly * Not included with complete brake assembly. Item sold separately.
" x " K Nev-R-Adjust Electric rake 00-000 lbs. capacity 9 x_nev-r-adj_oval mag_-0 CSA approved at 000#/. SLR 0 Electric rake 000# 0 K--00 LH Complete rake Assembly 0 K--00 RH Complete rake Assembly (shown) 0-09-0 acking Plate Assembly 0-0-0 LH Actuating Lever Arm Assembly 0-0-0 RH Actuating Lever Arm Assembly 0-00-00 Wire Clip 0-009-00 Retractor Spring K--00 LH Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--0 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K--00 RH Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--0 Secondary Shoe & Lining #09-0-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K-9-00 LH & RH rake Adjuster Kit Contains: #0-9-00 Adjusting Screw Spring #0-0-00 LH Lever Spring #0--00 RH Lever Spring #0-0-00 LH Adjuster Assembly #0-0-00 RH Adjuster Assembly #0--00 Adjuster Cable #0-9-00 Hook for Cable #0-0-0 LH Adjusting Lever #0-0-0 RH Adjusting Lever K--00 Magnet Kit Contains: #0--00 Magnet (black wire) #0-009-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 9 0-0-00 Wire Grommet 0 00-0-00 Anchor Post Washer * 00-9-00 Nut Washer Assembly * Not included with complete brake assembly. Item sold separately.
" x " Hydraulic rake 0 XH_-0 00-000 lbs. capacity Uni-Servo 9 Note: Uni-Servo brakes to be used with surge actuator Hydraulic rake 000# 0 K--00 LH Complete rake Assembly-US 0 K-9-00 RH Complete rake Assembly-US (shown) 0 K--00 LH Complete rake Assembly-DS 0 K--00 RH Complete rake Assembly-DS (shown) 0-09-0 acking Plate Assembly 0-0-00 LH rake Cylinder Uni-Servo 0-0-00 RH rake Cylinder Uni-Servo 0-0-00 LH rake Cylinder Duo-Servo 0-0-00 RH rake Cylinder Duo-Servo 0-00-00 or Cylinder Push Rod US () DS () 0-00-00 Sems (screw & washer assembly) 00--00 Anchor Post Washer 0-0-00 Retractor Spring K-9-00 LH Shoe & Lining Kit Contains: #00-9-00 LH Primary Shoe & Lining #00--0 LH Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup #09-0-00 Shoe Hold Down Pin # K-0-00 RH Shoe & Lining Kit Contains: #00-9-00 RH Primary Shoe & Lining #00--0 RH Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup #09-0-00 Shoe Hold Down Pin # 0-09-00 Adjuster Assembly 9 0-0-00 Adjusting Screw Spring 0 0-00-00 Adjuster Slot Plug * 00-9-00 Nut Washer Assembly ns 0-09-00 leeder Screw (included with item #) ns - not shown * Not included with complete brake assembly. Item sold separately.
" x " Hydraulic rake With Parking Feature 00-000 lbs. capacity XHPF_-0 0 Uni-Servo 9 Note: Uni-Servo brakes to be used with surge actuator Hydraulic Parking rake 000# 0 K--00 LH Complete rake Assembly-DS 0 K--00 RH Complete rake Assembly-DS (shown) 0 K--00 LH Complete rake Assembly-US 0 K--00 RH Complete rake Assembly-US (shown) 0-09- LH acking Plate Assembly 0-09- RH acking Plate Assembly 0-0-00 LH rake Cylinder Duo-Servo 0-0-00 RH rake Cylinder Duo-Servo 0-0-00 LH rake Cylinder Uni-Servo 0-0-00 RH rake Cylinder Uni-Servo 0-00-00 or Cylinder Push Rod US () DS () 0-00-00 Sems (screw & washer assembly) 00--00 Anchor Post Washer 0-0-00 Retractor Spring K-9-00 LH Shoe & Lining Kit Contains: #00-9-00 Primary Shoe & Lining #00--0 Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup #09-0-00 Shoe Hold Down Pin # K-0-00 RH Shoe & Lining Kit Contains: #00-9-00 Primary Shoe & Lining #00--0 Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup #09-0-00 Shoe Hold Down Pin # 0-09-00 Adjuster Assembly 9 0-0-00 Adjusting Screw Spring 0 0-00-00 Adjuster Slot Plug * 00-9-00 Nut Washer Assembly 0-0-0 LH Parking Lever and Pin 0--0 RH parking Lever and Pin 0-09-00 Parking Strut 0-0-00 Parking Strut Spring 00--00 Spring Tension Washer 09-0-00 Retainer ns 0-09-00 leeder Screw (included with item #) *ns 0--00 Park rake Cable ns - not shown * Not included with complete brake assembly. Item sold separately.
" x " Hydraulic rake Free acking 0 XHF_-0 A 00-000 lbs. capacity 9 Note: Uni-Servo brakes to be used with surge actuator Hydraulic Free acking rake 0 K--00 LH Complete rake Assembly 0 K--00 RH Complete rake Assembly (shown) 0-09-0 acking Plate Assembly 0-0-00 LH rake Cylinder Uni-Servo 0-0-00 RH rake Cylinder Uni-Servo 0-00-00 Cylinder Push Rod 0-00-00 Sems (screw & washer assembly) 0-09-0 Travel Link 0-0-00 Retractor Spring A 0-0-0 Shoe Lever Return Spring K-9-00 LH Shoe & Lining Kit Contains: #00--0 LH Primary Shoe & Lining #00--0 LH Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup-Sec. #0-00-00 Shoe Hold Down Cup-Primary #0-00-00 Shoe Hold Down Spring-Primary #09-0-00 Shoe Hold Down Pin #-Primary #09-00-00 Shoe Hold Down Pin #-Sec. K-9-00 RH Shoe & Lining Kit Contains: #00--09 RH Primary Shoe & Lining #00--0 RH Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup-Sec. #0-00-00 Shoe Hold Down Cup-Primary #0-00-00 Shoe Hold Down Spring-Primary #09-0-00 Shoe Hold Down Pin #-Primary #09-00-00 Shoe Hold Down Pin #-Sec. 0-0-00 Adjuster Assembly 9 0--00 Adjusting Screw Spring 0 0-00-00 Adjuster Slot Plug * 00-9-00 Nut Washer Assembly 00--0 Shoe Lever 00-0-00 Locknut 00-0-00 Screw 00-0-00 Washer 0-0-0 Primary Shoe Return Spring ns 0-09-00 leeder Screw (included with item #) ns - not shown * Not included with complete brake assembly. Item sold separately. Hydraulic Free acking rake Corrosion Resistant 0 K--0 LH Complete rake Assembly 0 K--0 RH Complete rake Assembly 0-09-09 acking Plate Assembly 0-0-0 LH rake Cylinder Uni-Servo 0-0-0 RH rake Cylinder Uni-Servo 0-00-00 Cylinder Push Rod 0-00-00 Sems (screw & washer assembly) 0-09-0 Travel Link 0-0-00 Retractor Spring A 0-0-0 Shoe Lever Return Spring K--00 LH Shoe & Lining Kit Contains: #00--0 LH Primary Shoe & Lining #00--0 LH Secondary Shoe & Lining #0-0-0 Shoe Hold Down Spring & Cup-Sec. #0-00-00 Shoe Hold Down Cup-Primary #0-00-0 Shoe Hold Down Spring & Cup-Prim. #09-0-00 Shoe Hold Down Pin #-Primary #09-00-00 Shoe Hold Down Pin #-Sec. K--00 RH Shoe & Lining Kit Contains: #00--0 RH Primary Shoe & Lining #00--0 RH Secondary Shoe & Lining #0-0-0 Shoe Hold Down Spring & Cup-Sec. #0-00-00 Shoe Hold Down Cup-Primary #0-00-0 Shoe Hold Down Spring & Cup-Prim. #09-0-00 Shoe Hold Down Pin #-Primary #09-00-00 Shoe Hold Down Pin #-Sec. 0-0-00 Adjuster Assembly 9 0--0 Adjusting Screw Spring 0 0-00-00 Adjuster Slot Plug * 00-9-00 Nut Washer Assembly 00--0 Shoe Lever 00-0-00 Locknut 00-0-00 Screw 00-0-00 Washer 0-0-0 Primary Shoe Return Spring ns 0-09-00 leeder Screw (included with item #)
" x " Hydraulic rake Free acking With Parking Feature 00-000 lbs. capacity XHFP_-0 9 0 9 Note: Uni-Servo brakes to be used with surge actuator 9 0 A Hydraulic Free acking Parking rake 0 K-0-00 LH Complete rake Assembly 0 K--00 RH Complete rake Assembly (shown) 0-09- LH acking Plate Assembly 0-09- RH acking Plate Assembly 0-0-00 LH rake Cylinder Uni-Servo 0-0-00 RH rake Cylinder Uni-Servo 0-00-00 Cylinder Push Rod 0-00-00 Sems (screw & washer assembly) 0-09-0 Travel Link 0-0-00 Retractor Spring A 0-0-0 Shoe Lever Return Spring K-9-00 LH Shoe & Lining Kit Contains: #00--0 LH Primary Shoe & Lining #00--0 LH Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup-Sec. #0-00-00 Shoe Hold Down Cup-Primary #0-00-00 Shoe Hold Down Spring-Primary #09-0-00 Shoe Hold Down Pin #-Primary #09-00-00 Shoe Hold Down Pin #-Sec. K-9-00 RH Shoe & Lining Kit Contains: #00--09 RH Primary Shoe & Lining #00--0 RH Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup-Sec. #0-00-00 Shoe Hold Down Cup-Primary #0-00-00 Shoe Hold Down Spring-Primary #09-0-00 Shoe Hold Down Pin #-Primary #09-00-00 Shoe Hold Down Pin #-Sec. 0-0-00 Adjuster Assembly 9 0--00 Adjusting Screw Spring 0 0-00-00 Adjuster Slot Plug * 00-9-00 Nut Washer Assembly 00--0 Shoe Lever 00-0-00 Locknut 00-0-00 Screw 00-0-00 Washer 0-0-0 Primary Shoe Return Spring 09-0-00 Retainer 9 0-0-0 LH Parking Lever and Pin 9 0--0 RH Parking Lever and Pin 0 0-9-0 Strut for Parking rake 00--00 Washer ns 0-09-00 leeder Screw (included with item #) *ns 0--00 Park rake Cable ns - not shown * Not included with complete brake assembly. Item sold separately. Hydraulic Free acking Parking rake Corrosion Resistant 0 K-0-0 LH Complete rake Assembly 0 K--0 RH Complete rake Assembly 0-09- LH acking Plate Assembly 0-09- RH acking Plate Assembly 0-0-0 LH rake Cylinder Uni-Servo 0-0-0 RH rake Cylinder Uni-Servo 0-00-00 Cylinder Push Rod 0-00-00 Sems (screw & washer assembly) 0-09-0 Travel Link 0-0-00 Retractor Spring A 0-0-0 Shoe Lever Return Spring K--00 LH Shoe & Lining Kit Contains: #00--0 LH Primary Shoe & Lining #00--0 LH Secondary Shoe & Lining #0-0-0 Shoe Hold Down Spring & Cup-Sec. #0-00-00 Shoe Hold Down Cup-Primary #0-00-0 Shoe Hold Down Spring-Primary #09-0-00 Shoe Hold Down Pin #-Primary #09-00-00 Shoe Hold Down Pin #-Sec. K--00 RH Shoe & Lining Kit Contains: #00--0 RH Primary Shoe & Lining #00--0 RH Secondary Shoe & Lining #0-0-0 Shoe Hold Down Spring & Cup-Sec. #0-00-00 Shoe Hold Down Cup-Primary #0-00-0 Shoe Hold Down Spring-Primary #09-0-00 Shoe Hold Down Pin #-Primary #09-00-00 Shoe Hold Down Pin #-Sec. 0-0-00 Adjuster Assembly 9 0--0 Adjusting Screw Spring 0 0-00-00 Adjuster Slot Plug * 00-9-00 Nut Washer Assembly 00--0 Shoe Lever 00-0-00 Locknut 00-0-00 Screw 00-0-00 Washer 0-0-0 Primary Shoe Return Spring 09-0-00 Retainer 9 0-0-0 LH Parking Lever and Pin 9 0--0 RH Parking Lever and Pin 0 0-9-0 Strut for Parking rake 00--00 Washer ns 0-09-00 leeder Screw (included with item #)
- Disc rake for,000 Lb. Axles CSA approved at 000#/. SLR Exp000disc_- 00-000 lbs. capacity Disc rake 000# 090-00-0 LH Anchor Yoke 090-00-0 RH Anchor Yoke (shown) K--00 Caliper Assembly Kit for LH or RH Contains: 00-0-00 Caliper Mounting Nut 00--00 Caliper Mounting olt 09-09-00 Cotter Ring 0-00-00 Tube Clamp 0-09-00 leeder Screw 0-09-00 Adapter Fitting 0-0-00 Pad Retaining Pin 0--00 Cross Over Hydraulic Line (yokes without notch) 0--00 Cross Over Hydraulic Line (yokes with notch) 0-00-00 Hex olt 09-00-0 Assembled Caliper Half K-9-00 rake Pad Kit (axle set) K--00 Rotor Kit 00-9-00 ³ ₈" rake Mounting Nut-Washer Assembly Disc rake Hubs & Studs 00-0-0 Grease ¹ ₂" Studs on.0 00--00 ¹ ₂-0 x.0" Press-in Stud Disc rake 000# With MM Nev-R-Lube 090-00-0 LH Anchor Yoke 090-00-0 RH Anchor Yoke K--00 Caliper Assembly Kit for LH or RH Contains: 00-0-00 Caliper Mounting Nut 00--00 Caliper Mounting olt 09-09-00 Cotter Ring 0-00-00 Tube Clamp 0-09-00 leeder Screw 0-09-00 Adapter Fitting 0-0-00 Pad Retaining Pin 0--00 Cross Over Hydraulic Line (yokes without notch) 0--00 Cross Over Hydraulic Line (yokes with notch) 0-00-00 Hex olt 09-00-0 Assembled Caliper Half K-9-00 rake Pad Kit (axle set) K--00 Rotor Kit 00-9-00 ³ ₈" rake Mounting Nut-Washer Assembly Nev-R-Lube Disc rake Hubs 00-0-0 ¹ ₂" Studs, mm on.0 00--00 ¹ ₂-0 x.0" Press-in Stud 9
Disc rake for,000 Lb. Axles 00-000 lbs. capacity CSA approved at 000#/.0 SLR Exp000disc_-0 Disc rake 000# 090-00-0 LH Anchor Yoke 090-00-0 RH Anchor Yoke (shown) K-9-00 Caliper Assembly Kit for LH or RH Contains: 00-0-00 Caliper Mounting Nut 00--00 Caliper Mounting olt 09-09-00 Cotter Ring 0-00-00 Tube Clamp 0-09-00 leeder Screw 0-09-00 Adapter Fitting 0-0-00 Pad Retaining Pin 0--00 Cross Over Hydraulic Line (yokes with notch) 0-00-00 Hex olt 09-00-0 Assembled Caliper Half K-9-00 rake Pad Kit (axle set) 00-9-00 ³ ₈" rake Mounting Nut-Washer Assembly Disc rake Hubs & Studs 00--0 Grease ¹ ₂" Studs on.0 00-- Oil ¹ ₂" Studs on.0 00-- Grease ⁹ ₁₆" Studs on.0 00-- Oil ⁹ ₁₆" Studs on.0 00-- Grease ⁵ ₈" Studs on.0 00-- Oil ⁵ ₈" Studs on.0 00--00 ¹ ₂-0 x." Press-in Stud 00--00 ⁹ ₁₆- x.0" Press-in Stud 00--00 ⁵ ₈- x.0" Press-in Stud 0
AIRFLEX Light Trailer Suspension System 00-000 lbs. capacity Smooth Out the Roughest Roads Soft Ride New hybrid suspension combines air and rubber torsion for an excellent ride Independent Ride and stability improve with independent wheel action Equalizing Axle-to-axle load equalization allows use on triple axle trailers Reliable Rubber cushions ride even if air is not available Maintains constant ride height for the ultimate ride Fully assembled for easy installation Adjustable axle alignment feature Available for single, tandem or triple axle applications Optional ride height control valve and air generation kits are available year limited warranty
AIRFLEX for,000 Lb. Axles efore May 00 00-000 lbs. capacity Service Parts Only 9 0 ExpAIRFLEX_-09 AIRFLEX Suspension Components 000# Item Part No. Qty/Axle Description 00--00 LH Suspension Assembly (shown) (incl. items #-) 00--00 RH Suspension Assembly (incl. items #-) Air Spring & Mounting Hardware 0-9-00 Air Spring 00--0 ¾"- Jam Nut 00--00 ¾" Lock Washer 00--00 ½"- Hex Nut 00-0-00 ½" Lock Washer 00-9-00 ½"- Hex olt Suspension Mounting Hardware 00--00 Side Mount racket 9 00--00 ⁵ ₈" Mounting olt 0 00--00 ⁵ ₈" Locknut 00--00 ⁵ ₈" Washer Axle Attaching Hardware 0-090-0 ³ ₄" U-olt 00--00 ³ ₄" Locknut 0-0-0 Tie Plate Air Supply Kits ns K--0 - Tandem Plumbing Kit with Ride Height Control Valve ns K--0 - Air Generation Kit (includes compressor and tank) ns K--0 - Manual Dump Valve Kit ns K--0 - Tri-Axle Conversion Plumbing Kit ns - not shown
AIRFLEX for,000 Lb. Axles After May 00 LH 0 9 Torsion Axle Height Control Valve Kit See Kit Instructions Ordered with Suspension RH ExpAirflex_-0 00-000 lbs. capacity Note: All dimensions are shown at the design height position. Tube Cross Member ½" x ½". 9.00 olt Torque Chart Size Ft. Lbs. ⅜- ¾-0 0.99 FORWARD AIRFLEX Suspension Components 000# Item Part No. Qty/Axle Description n/a Torsion Axle with Suspension rackets 00--00 RH Frame racket 00--00 LH Frame racket 00--00 Channel, Air Spring Support W0--9 Firestone Air Spring 0--00 Pivot ushing Kit 0--00 ushing Spacer/Liner n/a ³ ₄-0 UNC x." LG HHCS 9 n/a ³ ₄-0 UNC Stover Lock Nut 0 n/a ³ ₈- UNC x." LG HHCS n/a ³ ₈ Regular Split Lock Washer n/a ³ ₈- UNC x " LG HHCS n/a ¹ ₄ NPTM x ¹ ₄ T 90 Elbow, Swivel n/a ¹ ₄ x." LG Nylon Tube n/a Grommet n/a ¹ ₄ T Union Tee n/a ¹ ₄ T Plug Air Supply Kits ns K-9-0 - Ride Height Control Kit ns K-9-0 - Air Supply and Control Kit ns K-9-0 - Air Control Kit Without Air Supply n/a - not available ns - not shown