Table of Contents Table of Contents Fluid Power PBC / PEC Pneumatics and Electro-Pneumatics PBC 11 Fluid power trainer pneumatics set PBC 12 Fluid power trainer pneumatics set PEC 11 Fluid power trainer Basic Electric and Electro-Pneumatics PEC 12 Fluid power trainer Basic Electric and Electro-Pneumatics 1 2 2 3 11 18 28 Lucas Nülle GmbH Page 1/36 www.lucas-nuelle.com
Fluid Power PBC / PEC Pneumatics and Electro-Pneumatics PBC / PEC Pneumatics and Electro-Pneumatics Lucas Nülle GmbH Page 2/36 www.lucas-nuelle.com
PBC 11 Fluid power trainer pneumatics set PBC 11 Fluid power trainer pneumatics set The pneumatics training set schemes is suitable for training objectives and contents for vocational and advanced professional training of technicians. It covers the fundamentals of pneumatics based on authentic industrial products. Project exercises: Direct control, single-acting cylinder, extending Direct control, single-acting cylinder, retracting Indirect control, single-acting cylinder Velocity control, single-acting cylinder Quick moving back, single-acting cylinder Direct control, double-acting cylinder with button Indirect control, double-acting cylinder Velocity control, double-acting cylinder Control of double-acting cylinders, pulse valve, 2 manual buttons Distance dependent control of double-acting cylinders, pulse valve Control of double-acting cylinders, pulse valve, 2 reflex nozzles Stop control, double-acting cylinder, 5/3 directional valve, pulling load Pressure-dependent control, 1 double-acting cylinder Time-dependent control, 1 double-acting cylinder Connection control with shuttle and two-pressure valves Signal control, 2 double-acting cylinders, without signal overlapping Sequence control, 2 double-acting cylinders, signal overlapping, roller levers with idle return Sequence control, 2 double-acting cylinders, signal overlapping, switchover valve Grafcet Lucas Nülle GmbH Page 3/36 www.lucas-nuelle.com
Basic equipment set, consisting of: Basic equipment set, consisting of: Pos. Product name Bestell-Nr. Anz. 1 Basic pneumatic kit SE2905-1C 1 The pneumatics equipment set is designed for implementing training objectives and covering training content in industrial and commercial advanced training and applies to train the fundamentals of pneumatics using real industrial components. Single and doubleaction cylinders, 3/2-directional, 4/2-directional, 5/2-directional and 5/3-directional valves, flow-control valves, non-return valves, onedirectional flow control valves, exhaust-air restriction, quick exhaust valves, pneumatic-type amplifier, reflection nozzle, pneumatic logic valves, time delay valves. Consists of: 1 x Filter regulator 3/2-directional valve, 0.2 to 10 bar 1 x Pneumatic manifold, 6-fold 1 x Single-action cylinder, d = 25 mm, h = 50 mm 2 x Double-action cylinder, d = 25 mm, h = 100 mm 1 x Manometer 0 to 10 bar 3 x 3/2-directional valve, pushbutton 1 x 3/2-directional valve, with pushbutton, open when unactuated (NO) 1 x 5/2-directional valve, with spring-action reset, pneumatically actuated 2 x 3/2-directional, roller lever 1 x 3/2-directional valve, with spring-action reset 3 x 5/2-directional pulse valve, pneumatically actuated 1 x 5/3-directional valve, centre lock position, pneumatically actuated 1 x 3/2-directional valve, adjustable, 2 to 8 bar 1 x 2/2-directional valve, time-delayed, 2 to 30 s 1 x Shuttle valve, OR valve 2 x Dual-pressure valve, AND valve 2 x One-directional flow control valve 1 x Quick exhaust valve 1 x Load simulator d = 25 mm, h = 100 mm, m = 3.4 kg 2 x Proximity switches, pneumatic, with mount 1 x Vacuum suction grip 2 x Non-return valve, de-lockable 10 x T-connector 4 mm 20 x Sealing plugs 4 mm 10 x Noise suppressors 1 x Pipe cutter 1 x Extraction tool 20m Plastic hose 4 x 0.75, PU, black 2m Plastic hose 6.0 x 1.05, PU 4 x Storage box Lucas Nülle GmbH Page 4/36 www.lucas-nuelle.com
2 Grooved plate 1130 x 700 x 30 mm SE2905-8A 1 Installation surface for quick assembly for exercise installations, serves the fastening of components by means of clamping connection. Advantages: Grooved plate usable on both sides Flexible fitting without tools component can be assembled rotated by 4 x 90 compact groove distance low groove width, thus optimum space utilization, horizontally, the attachment can be adjusted continuously; vertically in the grid, clearly arranged installation of the components and thus, short length of the connection pipes. Consisting of: incl. fastening Dimensions 1130x700x30 mm³ Weight: 12 kg 3 Mobile aluminium experiment stand for pneumatics and hydraulics ST7200-3W 1 High-quality, mobile experiments stand from the SybaPro range for demonstrations and experiments. Features aluminium profile legs compatible with all add-ons and extensions for the SybaPro system. Optimized for two independent work stations for pneumatics or hydraulics. The mobile experiment stand is supplied in kit form and needs to be assembled by customers themselves. Table top: Frame: Dimensions: 2 Table tops made of 3mm sheet steel, used as a tray or as table top, 380 x 1150 mm (W x D) 1 bottom tray made of 3mm sheet steel, 700 x 1150 x 30 mm Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Power supply with 6-outlet socket strip mounted underneath the table top, 2-m lead and earthed plugs 2 extruded aluminium profiles with multiple grooves 1650 x 120 x 40 mm (WxHxD) 4 extruded aluminium profiles with multiple grooves 750 x 120 x 40 mm (WxHxD) 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back) Grooves accommodate standard industrial mountings Space for extension of power supply duct Base made of rectangular tubing with 4 swivelling double casters, 2 of which have brakes Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Height of table top 900 mm 1250 x 1800 x 800 mm (WxHxD) Lucas Nülle GmbH Page 5/36 www.lucas-nuelle.com
4 Compressor, low-noise SE2902-9L 1 Extremely quiet compressed air system with compressor motor, thermo switch and automatic pressure switch. Tanks made of special steel with security valve and non-return valve, master pressure gauge, condensation drain, stop valve and maintenance unit Motor output: 0.34 kw Suction capacity: 50 l/min Power consumption at 8 bars: 2.9 A Pressure: 8 bars Tank capacity: 15 l. Noise level: 40 db(a)/1m Operating voltage: 230V AC incl. tube and connection set Dimensions: 500x410x410 mm (HxWxL) Weight: 19 kg 5 Pneumatik 01 einseitig bestückt LA9412 1 Aufbau, Inbetriebnahme und Test des mobilen Hydraulik- und Pneumatikversuchsstand Lucas Nülle GmbH Page 6/36 www.lucas-nuelle.com
Additionally recommended Pos. Product name Bestell-Nr. Anz. 6 IDG3 membrane dryer with rapid coupling and filter AF20 with water trap LM9671 1 Membrane dryer, a reliable, effective and cost-efficient alternative for compressed air drying. Compact and light No power supply required Built-in noise suppressor reduces noise development from venting air Non-heating and vibration-free Air filter, high-quality filter water trap Double-sided internal thread 1/4" Semi-automatic drainage High-quality 50 Micro filtering Supplies clean compressed air Replaceable filter element Compact design Lucas Nülle GmbH Page 7/36 www.lucas-nuelle.com
Media: Pos. Product name Bestell-Nr. Anz. 7 Interactive Lab Assistant: Pneumatics SO2801-6A 1 The instructions take the form of an Interactive Lab Assistant course. This multimedia course guides students step by step through the topic of pneumatics. The fundamentals are conveyed by means of easily understood illustrations. The Interactive Lab Assistant along with the test questions make up a comprehensive experimenting environment. Features: Interactive experiment set-ups Measurements and graphics can be copied into the experiment instruction pages by drag and drop Questions with feedback and evaluation logic for progress monitoring Printable document for simple printing out of instructions and solutions CD-ROM with Labsoft browser and course software Training contents: Basic information on carrying out experiments Detailed experiment descriptions Tests of knowledge Compilation of test results Optional Accessories: Pos. Product name Bestell-Nr. Anz. 8 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL 7047 Lucas Nülle GmbH Page 8/36 www.lucas-nuelle.com
9 Monitor holder for flat screen monitor of weight up to 10kg/22lb, VESA 75/100 ST8010-4L 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 10kg/22lb TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range The set consists of the following: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile Includes assembly instructions 10 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 Shelf for desktop PC made of 1.5mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height Adjustable width (160-255mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL7047 Lucas Nülle GmbH Page 9/36 www.lucas-nuelle.com
11 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof Lucas Nülle GmbH Page 10/36 www.lucas-nuelle.com
PBC 12 Fluid power trainer pneumatics set PBC 12 Fluid power trainer pneumatics set The pneumatics training set schemes is suitable for training objectives and contents for vocational and advanced professional training of technicians. It covers the fundamentals of pneumatics based on authentic industrial products. Project exercises: Direct control, single-acting cylinder, extending Direct control, single-acting cylinder, retracting Direct control, double-acting cylinder with button Indirect control, double-acting cylinder Velocity control, double-acting cylinder Control of double-acting cylinders, pulse valve, 2 manual buttons Distance dependent control of double-acting cylinders, pulse valve Time-dependent control, 1 double-acting cylinder Connection control with shuttle and two-pressure valves Signal control, 2 double-acting cylinders, without signal overlapping Grafcet Lucas Nülle GmbH Page 11/36 www.lucas-nuelle.com
Basic equipment set, consisting of: Basic equipment set, consisting of: Pos. Product name Bestell-Nr. Anz. 12 Grundbausatz Pneumatik -manuelle/pneumatische Ventile nach PAL SE2905-1D 1 The pneumatics device set for PAL exercises is suitable for implementing the learning goals and study content in technical commercial training and further education on the basics of pneumatics in accordance with PAL based on real industrial products. The device set is not specially tailored for a PAL test, which means that older tests can also be used for preparation. Consists of: 2 x Double action cylinder, d = 25 mm, h = 100 mm 1 x Single action cylinder, d = 25 mm, h = 50 mm 2 x 3/2-way directional control valve M5, push button 1 x 3/2-way directional control valve M5, toggle 3 x 3/2-way directional control valve M5, sensing roller 1 x 3/2-way directional control valve G1/8, sensing roller 1 x 3/2-way directional control valve M5, idle return roller 1 x 5/2-way directional control valve G1/8, with spring return, pneumatically operated 2 x 5/2-way directional control valve G1/8, pulse, pneumatically operated 3 x Throttle check valve G1/8 1 x Rapid exhaust valve G1/8 2 x Shuttle valve G1/8, OR 2 x Dual pressure valve M5, AND 1 x 2/2-way directional control valve, time-delayed, 2 to 30 s 2 x Proximity switch, pneumatic, with holder 1 x Pneumatic distributor, 6x with 3/2-way directional control valve, PAL 1 x 3/2-way directional control valve G1/8, push button 1 x Manometer 0 to 10 bar 1 x Filter regulator 1 x Cable channel 200 mm 1 x Cable channel 300 mm 1 x Cable channel 400 mm 1 x Cable channel 500 mm 1 x Terminal connector, 5 x, with PAL ID plate 2 x Plastic tube 4 x 0.75, PU, black, packaging unit: 10 m 1 x T plug connector, 4 mm, packaging unit: 10 1 x Angled plug connector, 4 mm, packaging unit: 10 1 x Blanking connector, 4 mm, packaging unit: 20 Lucas Nülle GmbH Page 12/36 www.lucas-nuelle.com
13 Grooved plate 1130 x 700 x 30 mm SE2905-8A 1 Installation surface for quick assembly for exercise installations, serves the fastening of components by means of clamping connection. Advantages: Grooved plate usable on both sides Flexible fitting without tools component can be assembled rotated by 4 x 90 compact groove distance low groove width, thus optimum space utilization, horizontally, the attachment can be adjusted continuously; vertically in the grid, clearly arranged installation of the components and thus, short length of the connection pipes. Consisting of: incl. fastening Dimensions 1130x700x30 mm³ Weight: 12 kg 14 Mobile aluminium experiment stand for pneumatics and hydraulics ST7200-3W 1 High-quality, mobile experiments stand from the SybaPro range for demonstrations and experiments. Features aluminium profile legs compatible with all add-ons and extensions for the SybaPro system. Optimized for two independent work stations for pneumatics or hydraulics. The mobile experiment stand is supplied in kit form and needs to be assembled by customers themselves. Table top: Frame: Dimensions: 2 Table tops made of 3mm sheet steel, used as a tray or as table top, 380 x 1150 mm (W x D) 1 bottom tray made of 3mm sheet steel, 700 x 1150 x 30 mm Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Power supply with 6-outlet socket strip mounted underneath the table top, 2-m lead and earthed plugs 2 extruded aluminium profiles with multiple grooves 1650 x 120 x 40 mm (WxHxD) 4 extruded aluminium profiles with multiple grooves 750 x 120 x 40 mm (WxHxD) 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back) Grooves accommodate standard industrial mountings Space for extension of power supply duct Base made of rectangular tubing with 4 swivelling double casters, 2 of which have brakes Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047 Height of table top 900 mm 1250 x 1800 x 800 mm (WxHxD) Lucas Nülle GmbH Page 13/36 www.lucas-nuelle.com
15 Compressor, low-noise SE2902-9L 1 Extremely quiet compressed air system with compressor motor, thermo switch and automatic pressure switch. Tanks made of special steel with security valve and non-return valve, master pressure gauge, condensation drain, stop valve and maintenance unit Motor output: 0.34 kw Suction capacity: 50 l/min Power consumption at 8 bars: 2.9 A Pressure: 8 bars Tank capacity: 15 l. Noise level: 40 db(a)/1m Operating voltage: 230V AC incl. tube and connection set Dimensions: 500x410x410 mm (HxWxL) Weight: 19 kg 16 Pneumatik 01 einseitig bestückt LA9412 1 Aufbau, Inbetriebnahme und Test des mobilen Hydraulik- und Pneumatikversuchsstand Lucas Nülle GmbH Page 14/36 www.lucas-nuelle.com
Additionally recommended Pos. Product name Bestell-Nr. Anz. 17 IDG3 membrane dryer with rapid coupling and filter AF20 with water trap LM9671 1 Membrane dryer, a reliable, effective and cost-efficient alternative for compressed air drying. Compact and light No power supply required Built-in noise suppressor reduces noise development from venting air Non-heating and vibration-free Air filter, high-quality filter water trap Double-sided internal thread 1/4" Semi-automatic drainage High-quality 50 Micro filtering Supplies clean compressed air Replaceable filter element Compact design Lucas Nülle GmbH Page 15/36 www.lucas-nuelle.com
Media: Pos. Product name Bestell-Nr. Anz. 18 Interactive Lab Assistant: Pneumatik nach PAL SO2801-6C 1 Die Versuchsanleitung bildet ein Interactive Lab Assistant Kurs. Dieser Multimediakurs führt Schritt für Schritt in die Thematik der Pneumatik. Grundlagen werden durch leicht verständliche Bilder vermittelt. Der Interactive Lab Assistant bildet zusammen mit dem Fragenteil eine umfangreiche Experimentierumgebung. Besonderheiten: Interaktive Versuchsaufbauten Messwerte und Grafiken können per Drag und Drop in der Versuchsanleitung gespeichert werden Fragen mit Feedback und Auswertelogik zur Wissensstandkontrolle Druckdokument zum komfortablen Ausdruck der Versuchsanleitung mit Lösungen CD-ROM mit Labsoft-Browser und Kurssoftware Lerninhalte: Grundsätzliches zur Versuchsdurchführung Ausführliche Versuchsbeschreibung Wissenstest Erzeugung des Prüfergebnisses Optional Accessories: Pos. Product name Bestell-Nr. Anz. 19 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL 7047 Lucas Nülle GmbH Page 16/36 www.lucas-nuelle.com
20 Monitor holder for flat screen monitor of weight up to 10kg/22lb, VESA 75/100 ST8010-4L 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 10kg/22lb TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range The set consists of the following: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile Includes assembly instructions 21 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 Shelf for desktop PC made of 1.5mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height Adjustable width (160-255mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL7047 Lucas Nülle GmbH Page 17/36 www.lucas-nuelle.com
22 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof Lucas Nülle GmbH Page 18/36 www.lucas-nuelle.com
PEC 11 Fluid power trainer Basic Electric and Electro-Pneumatics Lucas Nülle GmbH Page 19/36 www.lucas-nuelle.com
PEC 11 Fluid power trainer Basic Electric and Electro-Pneumatics Project exercises on electropneumatics : Master control of single-acting cylinders, valve with spring return Master control of double-acting cylinders, valve with spring return Hold element control, double-acting cylinder, pulse valve, direct Operated Hold element control, double-acting cylinder, pulse valve, relay Basic circuit with AND links Basic circuit with OR links Basic circuits with electric self-holding circuits Distance dependent control, double-acting cylinder, 1 elect. position switch Distance dependent control of double-acting cylinders, pulse valve, cylinder switch Distance dependent control of double-acting cylinders, valve with spring return, cylinder switch Stop controls, double-acting cylinder, 5/3 directional valve in locked central position Time-dependent control, double-acting cylinder, pick-up delay Time-dependent control, double-acting cylinder, release time delay Pressure-dependent control, double-acting cylinder Two-hand safety control, electric Sequence control, 2 double-acting cylinders, pulse valves Sequence control, 2 double-acting cylinders, pulse valves, signal Overlapping Sequence control, 2 double-acting cylinders, spring-returned valves, step chain Sequence control, 3 double-acting cylinders, pulse valves, step chain Sequence control, 3 double-acting cylinders, spring-returned valves, step chain Grafcet Lucas Nülle GmbH Page 20/36 www.lucas-nuelle.com
Supplement to basic set, consisting of: Supplement to basic set, consisting of: Pos. Product name Bestell-Nr. Anz. 23 Electrical extension kit SE2905-1B 1 Electropneumatics, extension device kit, based on the basic pneumatic kit, 3/2, 5/2 directional valves with electric control, cylinder switch, pressure switch and position switch. Consisting of: 1 x 3/2 directional solenoid valve, spring return 3 x 5/2 directional solenoid valve, with spring return 3 x 5/2 directional solenoid pulse valve 6 x Electric cylinder switch with adapter 1 x Electric position switch with roller lever 1 x Mechanical pressure switch 1-16 bar 1 x Sensor induktiv 1x Sensor capazitiv 1 x Double-acting cylinder d = 25 mm, H = 100 mm 1 x Throttle check valve 1 x Storage box 24 Power channel, experiment stand for pneumatics and hydraulics, 1250mm, 3HU/222PU ST8033-2F 1 Low profile power channel (console fitting) only 133mm high for 19" 3HU inserts The channel accommodates up to 222PU Base and lid made of anodised E6/EV1 extruded aluminium profiles Sides are made of painted sheet steel (colour (RAL7047) The console power channel includes a power supply bus equipped with 5-pole high power quick-release IP40 safety plugs conforming to DIN 40050 The channel can be mounted at any height between the extruded aluminium profiles of the tables Dimensions: 1150 x 133 x 230 mm (WxHxD) Weight: 10,5 kg Lucas Nülle GmbH Page 21/36 www.lucas-nuelle.com
25 Electrical Operating Module 84PU ST8008-9K 1 Electric operating module Multi-functional, compact operating module for all basic topics and more advanced experiments from the areas of electropneumatics and electrohydraulics. Module for setting up a control system with hard-wired programming, consisting of the following: 1 Switch 4 Push-buttons 6 Relays 1 Timer relay, adjustable with delayed pick-up 1 Timer relay, adjustable with delayed release 2 Optical displays 1 Audio indicator Technical data: Maximum current capacity of contacts/digital outputs: 2 A All inputs and outputs are via 4-mm safety sockets Built-in power supply, 24 V, 5 A Dimensions: 3HU/84WU Operating voltage: 110 V-230 V, 50/60 Hz Weight: 2.5 kg 26 Electrical Operating Module Interface 84PU ST8008-9H 1 Electric operating module Multi-functional, compact operating module for all basic topics and more advanced experiments from the areas of electropneumatics and electrohydraulics. Module for connection to a PC. Valves, cylinder, limit switches and analog measurements (e.g. pressure), as well as controls and display elements can be controlled via software using virtual relays: 8 Digital sensor inputs 6 Outputs for valves 1 Connector for valve manifolds 8 Analog inputs, 0...10 V 4 Analog inputs, 0/4...20 ma USB port for connection to PC as well as LN circuit diagram editor and measuring instruments. Software allows all the variables being measured to be plotted on the PC as a function of time. Technical data: Maximum current capacity of contacts/digital outputs: 2 A All inputs and outputs are via 4-mm safety sockets Built-in power supply, 24 V, 5 A Dimensions: 3HU/84WU Operating voltage: 110 V-230 V, 50/60 Hz Weight: 2.5 kg Lucas Nülle GmbH Page 22/36 www.lucas-nuelle.com
27 AC power panel, 230V/16A, RCD, shut-off, key switch, 42PU ST8008-3A 1 230V/50Hz AC power supply insert for supply of power and fuse protection Key switch for function enable Automatic circuit breaker, 16 A Earth leakage circuit breaker, 10 ma Emergency off push-button, turn to unlock 3 Safety sockets, L1,N, PE Indicator light Dimensions: 3HU/42WU Weight: 1.5kg 28 Socket panel unit, 2 earth pin sockets, 12PU ST8008-3X 1 Socket panel unit 2x230V, 16A to supply mains-powered devices and consumers. All sockets are connected in parallel. 2 earth contact sockets 230V, 16A Dimensions: 3HU/12PU Weight: 0.4kg 29 Pneumatik 02 Elektro LA9413 1 Aufbau, Inbetriebnahme und Test des mobilen Hydraulik- und Pneumatikversuchsstand Lucas Nülle GmbH Page 23/36 www.lucas-nuelle.com
Media: Pos. Product name Bestell-Nr. Anz. 30 Interactive Lab Assistant: Electropneumatics SO2801-6B 1 The instructions take the form of an Interactive Lab Assistant course. This multimedia course is a supplementary course which goes deeper into the subject of pneumatics. Electrical fundamentals are conveyed with the help of easily understandable illustrations. The Interactive Lab Assistant along with the test questions make up a comprehensive experimenting environment. Features: Interactive experiment set-ups Measurements and graphics can be copied into the experiment instruction pages by drag and drop Questions with feedback and evaluation logic for progress monitoring Printable document for simple printing out of instructions and solutions CD-ROM with Labsoft browser and course software Training contents: Basic information on carrying out experiments Detailed experiment descriptions Tests of knowledge Compilation of test results Accessories: Pos. Product name Bestell-Nr. Anz. 31 Safety measurement cable (4mm), 25cm/10", red SO5126-8A 15 Safety measurement lead with stackable, contact-proof 4mm plugs colour: red length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A Lucas Nülle GmbH Page 24/36 www.lucas-nuelle.com
32 Safety measurement cable (4mm), 25cm/10", black SO5126-8B 15 Safety measurement lead with stackable, contact-proof 4mm plugs colour: black length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A 33 Safety measurement cable (4mm), 25cm/10", blue SO5126-8E 5 Safety measurement lead with stackable, ccontact-proof 4mm plugs colour: blue length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A 34 Safety measurement cable (4mm), 50cm/20", red SO5126-8K 5 Safety measurement lead with stackable, contact-proof 4mm plugs colour: red length: 50 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A Lucas Nülle GmbH Page 25/36 www.lucas-nuelle.com
35 Safety measurement cable (4mm), 50cm/20", blue SO5126-8P 5 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: blue Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A 36 Safety measurement cable (4mm), 100cm/40", red SO5126-8U 5 Safety measurement leads with stackable, contact-proof 4mm plugs Colour: red Length: 100 cm Wire cross-section, 2.5 mm 2 Rating: 600V, CAT II, 32A 37 Safety measurement cable (4mm), 100cm/40", blue SO5126-9A 5 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: blue Length: 100 cm Wire cross-section 2.5 mm 2 Rating: 600V, CAT II, 32A Lucas Nülle GmbH Page 26/36 www.lucas-nuelle.com
Optional Accessories: Pos. Product name Bestell-Nr. Anz. 38 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL 7047 39 Monitor holder for flat screen monitor of weight up to 10kg/22lb, VESA 75/100 ST8010-4L 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 10kg/22lb TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range The set consists of the following: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile Includes assembly instructions Lucas Nülle GmbH Page 27/36 www.lucas-nuelle.com
40 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 Shelf for desktop PC made of 1.5mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height Adjustable width (160-255mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL7047 41 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof Lucas Nülle GmbH Page 28/36 www.lucas-nuelle.com
PEC 12 Fluid power trainer Basic Electric and Electro-Pneumatics PEC 12 Fluid power trainer Basic Electric and Electro-Pneumatics Project exercises on electropneumatics : Master control of single-acting cylinders, valve with spring return Master control of double-acting cylinders, valve with spring return Hold element control, double-acting cylinder, pulse valve, direct Operated Basic circuit with AND links Basic circuit with OR links Basic circuits with electric self-holding circuits Distance dependent control, double-acting cylinder, 1 elect. position switch Distance dependent control of double-acting cylinders, valve with spring return, cylinder switch Time-dependent control, double-acting cylinder, pick-up delay Time-dependent control, double-acting cylinder, release time delay Sequence control, 2 double-acting cylinders, pulse valves, signal Overlapping Grafcet Lucas Nülle GmbH Page 29/36 www.lucas-nuelle.com
Supplement to basic set, consisting of: Supplement to basic set, consisting of: Pos. Product name Bestell-Nr. Anz. 42 Erweiterungssatz: Pneumatik -elektrische Ventile nach PAL SE2905-1E 1 The expanded device set for PAL exercises is suitable for implementing the learning goals and study content in technical commercial training and further education on electro-pneumatics in accordance with PAL based on real industrial products. The device set is not specially tailored for a PAL test, which means that older tests can also be used for preparation. The device set SE2905-1D is required as a basis. Consists of: 3 x Cylinder switch with holder 1 x 3/2-way directional control valve, electrically operated, M5, with spring return 2 x 5/2-way directional control valve, electrically operated, G1/8, with spring return 2 x 5/2-way directional control valve, electrically operated, G1/8, pulse 1 x Electrical position sensor with roller lever 43 Power channel, experiment stand for pneumatics and hydraulics, 1250mm, 3HU/222PU ST8033-2F 1 Low profile power channel (console fitting) only 133mm high for 19" 3HU inserts The channel accommodates up to 222PU Base and lid made of anodised E6/EV1 extruded aluminium profiles Sides are made of painted sheet steel (colour (RAL7047) The console power channel includes a power supply bus equipped with 5-pole high power quick-release IP40 safety plugs conforming to DIN 40050 The channel can be mounted at any height between the extruded aluminium profiles of the tables Dimensions: 1150 x 133 x 230 mm (WxHxD) Weight: 10,5 kg Lucas Nülle GmbH Page 30/36 www.lucas-nuelle.com
44 Electrical Operating Module 84PU ST8008-9K 1 Electric operating module Multi-functional, compact operating module for all basic topics and more advanced experiments from the areas of electropneumatics and electrohydraulics. Module for setting up a control system with hard-wired programming, consisting of the following: 1 Switch 4 Push-buttons 6 Relays 1 Timer relay, adjustable with delayed pick-up 1 Timer relay, adjustable with delayed release 2 Optical displays 1 Audio indicator Technical data: Maximum current capacity of contacts/digital outputs: 2 A All inputs and outputs are via 4-mm safety sockets Built-in power supply, 24 V, 5 A Dimensions: 3HU/84WU Operating voltage: 110 V-230 V, 50/60 Hz Weight: 2.5 kg 45 Electrical Operating Module Interface 84PU ST8008-9H 1 Electric operating module Multi-functional, compact operating module for all basic topics and more advanced experiments from the areas of electropneumatics and electrohydraulics. Module for connection to a PC. Valves, cylinder, limit switches and analog measurements (e.g. pressure), as well as controls and display elements can be controlled via software using virtual relays: 8 Digital sensor inputs 6 Outputs for valves 1 Connector for valve manifolds 8 Analog inputs, 0...10 V 4 Analog inputs, 0/4...20 ma USB port for connection to PC as well as LN circuit diagram editor and measuring instruments. Software allows all the variables being measured to be plotted on the PC as a function of time. Technical data: Maximum current capacity of contacts/digital outputs: 2 A All inputs and outputs are via 4-mm safety sockets Built-in power supply, 24 V, 5 A Dimensions: 3HU/84WU Operating voltage: 110 V-230 V, 50/60 Hz Weight: 2.5 kg Lucas Nülle GmbH Page 31/36 www.lucas-nuelle.com
46 AC power panel, 230V/16A, RCD, shut-off, key switch, 42PU ST8008-3A 1 230V/50Hz AC power supply insert for supply of power and fuse protection Key switch for function enable Automatic circuit breaker, 16 A Earth leakage circuit breaker, 10 ma Emergency off push-button, turn to unlock 3 Safety sockets, L1,N, PE Indicator light Dimensions: 3HU/42WU Weight: 1.5kg 47 Socket panel unit, 2 earth pin sockets, 12PU ST8008-3X 1 Socket panel unit 2x230V, 16A to supply mains-powered devices and consumers. All sockets are connected in parallel. 2 earth contact sockets 230V, 16A Dimensions: 3HU/12PU Weight: 0.4kg 48 Pneumatik 02 Elektro LA9413 1 Aufbau, Inbetriebnahme und Test des mobilen Hydraulik- und Pneumatikversuchsstand Lucas Nülle GmbH Page 32/36 www.lucas-nuelle.com
Media: Pos. Product name Bestell-Nr. Anz. 49 Interactive Lab Assistant: Elektro Pneumatik nach PAL SO2801-6D 1 Die Versuchsanleitung bildet ein Interactive Lab Assistant Kurs. Dieser Multimediakurs führt Schritt für Schritt in die Thematik der Pneumatik. Grundlagen werden durch leicht verständliche Bilder vermittelt. Der Interactive Lab Assistant bildet zusammen mit dem Fragenteil eine umfangreiche Experimentierumgebung. Besonderheiten: Interaktive Versuchsaufbauten Messwerte und Grafiken können per Drag und Drop in der Versuchsanleitung gespeichert werden Fragen mit Feedback und Auswertelogik zur Wissensstandkontrolle Druckdokument zum komfortablen Ausdruck der Versuchsanleitung mit Lösungen CD-ROM mit Labsoft-Browser und Kurssoftware Lerninhalte: Grundsätzliches zur Versuchsdurchführung Ausführliche Versuchsbeschreibung Wissenstest Erzeugung des Prüfergebnisses Accessories: Pos. Product name Bestell-Nr. Anz. 50 Safety measurement cable (4mm), 25cm/10", red SO5126-8A 15 Safety measurement lead with stackable, contact-proof 4mm plugs colour: red length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A Lucas Nülle GmbH Page 33/36 www.lucas-nuelle.com
51 Safety measurement cable (4mm), 25cm/10", black SO5126-8B 15 Safety measurement lead with stackable, contact-proof 4mm plugs colour: black length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A 52 Safety measurement cable (4mm), 25cm/10", blue SO5126-8E 5 Safety measurement lead with stackable, ccontact-proof 4mm plugs colour: blue length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A 53 Safety measurement cable (4mm), 50cm/20", red SO5126-8K 5 Safety measurement lead with stackable, contact-proof 4mm plugs colour: red length: 50 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A Lucas Nülle GmbH Page 34/36 www.lucas-nuelle.com
54 Safety measurement cable (4mm), 50cm/20", blue SO5126-8P 5 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: blue Length: 50 cm Wire cross section 2.5 mm 2 Rating data: 600V, CAT II, 32A 55 Safety measurement cable (4mm), 100cm/40", red SO5126-8U 5 Safety measurement leads with stackable, contact-proof 4mm plugs Colour: red Length: 100 cm Wire cross-section, 2.5 mm 2 Rating: 600V, CAT II, 32A 56 Safety measurement cable (4mm), 100cm/40", blue SO5126-9A 5 Safety measurement lead with stackable, contact-proof 4mm plugs Colour: blue Length: 100 cm Wire cross-section 2.5 mm 2 Rating: 600V, CAT II, 32A Lucas Nülle GmbH Page 35/36 www.lucas-nuelle.com
Optional Accessories: Pos. Product name Bestell-Nr. Anz. 57 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 Accommodates about 48 safety measuring leads (4mm), suitable for mounting on walls or aluminium profiles Width 200 mm, 12 guide grooves for leads Adjustable height for mounting on aluminium profiles Can be mounted on the left or right Can be mounted on walls Includes 2 screws and tenon blocks Acid-resistant epoxy-resin powder coating, thickness 80 µm approx., colour RAL 7047 58 Monitor holder for flat screen monitor of weight up to 10kg/22lb, VESA 75/100 ST8010-4L 1 Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed in the optimum position so that work and experiments are less tiring. Pivoting arm with two-part joint Quick-lock for adjustment to any height on extruded aluminium profile VESA fastening 7.5 x 7.5cm Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter 2 Cable clips Adequate carrying capacity 10kg/22lb TFT monitor can be turned parallel to the table edge Separation can be adjusted to anywhere between 105 and 480mm Additionally included: Cable management set for installing cables along the profiles of the aluminium lab system furniture in the SybaPro range The set consists of the following: 3 Cross cable binders for front and rear grooves of aluminium profile 3 Cross cable binders for side grooves of aluminium profile 12 Cable binders 4 Aluminium cover profiles for covering and enabling wires to be run along the grooves of an aluminium profile Includes assembly instructions Lucas Nülle GmbH Page 36/36 www.lucas-nuelle.com
59 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 Shelf for desktop PC made of 1.5mm sheet steel punched with holes, suitable for all furniture in the SybaPro aluminium profile range Adjustable assembly height Adjustable width (160-255mm) Can be mounted to left or right Includes all equipment necessary for assembly (4 bolts and 4 tenon blocks) Acid-resistant epoxy-resin powder coating, 80µm thick approx., colour RAL7047 60 Protection cover for three-level experiment trolleys ST8010-9Y 1 Dust cover for three-level experiment trolleys For protecting equipment from dust and damp For keeping equipment out of sight (the cover must not be transparent, so is therefore opaque) Colour: matt dark grey with printed LN logo in orange) Material: nylon fabric with polyurethane coating High resistant to tearing, impregnated to be washable and waterproof Lucas Nülle GmbH Page 37/36 www.lucas-nuelle.com