EB -, -, -Poles; Volts AC ; Thermal Magnetic and Saf-T-Vue at C 5 0 5 0 5 EHB -, -, -Poles; 4 Volts AC ; Thermal Magnetic and Saf-T-Vue at C 5 0 5 0 5 -Pole, 77 Volts AC, 5 Volts DC➊ Underwriters Laboratories, Inc. Listed Interrupting s➑ Volts EB Breakers -Pole, 4 Volts AC, Volts DC➊ -Pole 4 Volts AC Standard Standard Standard Saf-T-Vue ➋ s EHB05➍ EHB00➍ EHB05 EHB EHB05 EHB0 EHB0 EHB0 EHB0 EHB0 EHB0 EHB0 EHB EHB05 EHB00 EHB05 EHB00 EHB05 EHB0 EHB0 EHB0 EHB0 EHB0 EHB0 EHB0 EHB EHB05 EHB00 EHB05 EHB00 EHB05 EHB0 EHB0 EHB0 EHB0 EHB0 EHB0 EHB0 EHB EHB05S EHB00S EHB05S EHB00S EHB05S EHB0S EHB0S EHB0S EHB0S EHB0S EHB0S EHB0S EHBS Approx. ship wt. lbs. Approx. ship wt. lbs. Approx. ship. wt. 4 lbs. FB, HFB -, -, -, 4-Poles; Volts AC ; Thermal Magnetic MARK 75 Saf-T-Vue at C 5 0 5 0 5 0 5 -Pole, 0 Volts AC, 5 Volts DC➊ -Pole 77 Volts AC 5 Volts DC➊ -Pole Volts AC Volts DC➊ -Pole Volts AC 4-Pole➋➎ Volts AC MARK 75 ➏ Standard MARK 75 ➐ Standard Saf-T-Vue ➋ MARK 75 Standard s HFB05➍ HFB00➍ HFB05 HFB HFB05 HFB0 HFB0 HFB0 HFB0 HFB0 HFB0 HFB0 HFB......... FB05 FB00 FB05 FB00 FB05 FB0 FB0 FB0 FB0 FB0 FB0 FB0 FB -Pole, Volts AC, 5/ Volts DC➊ HFB05 HFB00 HFB05 HFB00 HFB05 HFB0 HFB0 HFB0 HFB0 HFB0 HFB0 HFB0 HFB...... FB05 FB00 FB05 FB00 FB05 FB0 FB0 FB0 FB0 FB0 FB0 FB0 FB FB0 FB5 FB -Pole, Volts AC, 5/ Volts DC➊ Standard Standard Standard Saf-T-Vue ➋ s EB05➌ EB00➌ EB05 EB EB05 EB0 EB0 EB0 EB0 EB0 EB0 EB0 EB EB05 EB00 EB05 EB00 EB05 EB0 EB0 EB0 EB0 EB0 EB0 EB0 EB EB05 EB00 EB05 EB00 EB05 EB0 EB0 EB0 EB0 EB0 EB0 EB0 EB Approx. ship. wt. lbs. Approx. ship. wt. lbs. Approx. ship. wt. 4 lbs. Accessories and Modifications 0 and AC 5/ DC EHB, FB Breakers AC 77 AC (EHB) 4 AC AC (FB) DC MARK 75 HFB AC 77 AC➏ 4 AC AC DC (-Pole) 0,000 Asym., Sym. 5,000➊ 0,000 Asym., 8,000 Sym. 5,000 Asym., 4,000 Sym. 5,000 Asym., 4,000 Sym. 5,000 Asym., 4,000 Sym. 0,000➊ 75,000 Asym., 65,000 Sym. 75,000 Asym., 65,000 Sym. 0,000 Asym., 5,000 Sym. 0,000 Asym., 8,000 Sym. 0,000➊➒ FB05S FB00S FB05S FB00S FB05S FB0S FB0S FB0S FB0S FB0S FB0S FB0S FBS FB0S FB5S FBS For CSA, see page 4. HFB05 HFB00 HFB05 HFB00 HFB05 HFB0 HFB0 HFB0 HFB0 HFB0 HFB0 HFB0 HFB HFB0 HFB5 HFB EB05S EB00S EB05S EB00S EB05S EB0S EB0S EB0S EB0S EB0S EB0S EB0S EBS FB5 FB FB5 FB FB5 FB FB FB FB FB FB FB FB4 ➊ DC ratings apply to substantially non-inductive circuits. ➋ Not listed with Underwriters Laboratories, Inc. ➌ ing duty rated for 0 VAC fluorescent light applications only. ➍ ing duty rated for 77 VAC fluorescent light applications only. ➎ All four poles have thermal magnetic trip elements. Can be supplied with three protected poles and one unprotected, non-automatic pole if required. Order by description with no price or dimensional differences. EB: 0, Volts AC; 5/ Volts DC EHB: 77, 4 Volts AC; Volts DC FB, HFB: Volts AC; Volts DC ➏ 5-0A rated 75,000 AIC. -A rated 0,000A Asym., 5,000A Sym. ➐ -pole breakers are supplied in -pole frames with current carrying parts omitted from center pole. ➑ Interrupting capacities shown do not apply to molded case switches. ➒ s above 0,000 amperes not UL listed. March 00
8 Series C Molded Case Circuit Breakers Generally a first choice wherever physically and electrically practical Where communications, energy and power quality monitoring are desired As a direct replacement or add-on to already installed Series C product Where ampere rating flexibility is desired. (Interchangeable trip units are available.) Most current molded case circuit breaker technology Higher interrupting capacities in each frame size Smaller and lighter for a given frame size than other options Generally less expensive than other replacement breaker options Readily available throughout range / High levels of stock Available from stock rrent Production As a direct, one-for-one replacement of current production pre-series C product Where you know the catalog/style number but not the physical or electrical specifics about the application Ease of selection and certainty of replacement Guaranteed to be both a physical and electrical duplicate of original Still in production Newly manufactured UL listed Available from stock Replacement of Out-of-Production Panelboard or Motor Control Center Molded Case Circuit Breakers When replacing out-of-production circuit breakers in an existing Panelboard or MCC Newly manufactured and tested to the latest applicable standards Both physically and electrically interchangeable with the circuit breakers that they are designed to replace UL listed Available from stock in most frame sizes Factory Reconditioned Molded Case Circuit Breakers Where Series C and other replacement breaker options are either not available or not workable Where it is not feasible to modify or upgrade gear but there is a need to replace or add a circuit breaker Though not UL listed, these breakers are reconditioned and tested by tler-hammer at the factory according to the original manufacturing and engineering standards to which the breakers were built Available for all styles of out-of-production circuit breakers (E, F, G, J, K, L, M, P) Knowledge that these breakers are both safe and reliable Labeled Reconditioned Circuit Breaker, Resold By tler-hammer Service for Molded Case Circuit Breakers Where circuit breaker has sustained minor physical damage to a handle, lug, etc., that otherwise would be fully functional Large frame circuit breaker (A and above) that has experienced some normal wear, but is in generally good condition, as an economically driven alternative to new Prevents loss of circuit breakers due to minor damage Reduces overall breaker costs Prevents use of potentially unreliable third party refurbishers Includes full one year tler-hammer Warranty Ensures reliability through dealing with the original manufacturer with a long and well-recognized tradition of product safety, integrity and quality Provides a simple and convenient solution March 00
, Continued Special Breakers➊ FB, Magnetic Only, Front Adjustable (Includes Line and Load Terminals) 5 0 5 5 0 0 Magnetic Trip Range 7-5 - 5-0 - 66 - - - 66 - - 4 - - 4 4-5 575-0 Accessories and Modifications Nut Washer Screw -Pole➊➋, Volts AC -Pole, Volts AC Standard MARK 75 Standard Saf-T-Vue MARK 75 Catalog/Style Numbers FB0MRL FB0MRL FB0MRL D5G FBMRL 68C4G05 FBMRL 68C4G0 FB4MRL D5G 68C4G0 FB5MRL FB0MRL Terminals Breakers include load terminals only➌➍. Terminals are Underwriters Laboratories, Inc. listed as suitable for wire type and size. When used with aluminum conductors, use joint compound. When line terminals are required, order by style number from table at no charge with the breaker. Style 64BG0 Style 64BG0 Washer Screw Extrusion HFB0ML HFB0ML HFB0ML 4994D96G HFBML HFBML HFB4ML 4994D96G HFB5ML HFB0ML Style 64BG7 Clip Range Standard Terminals 0 (EB, EHB) #4-#0 #4-/0 # 4-4/0 Optional Terminals #4-#4 # 4-4/0 FB0MRL FB0MRL FB0MRL D5G0 FBMRL 68C4G06 FBMRL 68C4G0 FB4MRL D5G 68C4G04 FB5MRL FB0MRL Package of Three Line Terminals➎ Style Number 64BG4 64BG0 64BG7 64BG0 64BG7 Screw Clamp Style 64BG4 FB0SMRL FB0SMRL FB0SMRL 4998D89G0 FBSMRL... FBSMRL... FB4SMRL D58G 8E4647 FB5SMRL FB0SMRL HFB0ML HFB0ML HFB0ML 4994D96G0 HFBML HFBML HFB4ML 4994D96G 65E4667 HFB5ML HFB0ML Special Calibrations➏ Special calibration price additions apply to ampere ratings not listed as standard or for ambients other than C or C. For frequencies other than 0- Hz AC, refer to tler-hammer. See Application Data 9- for information regarding special conditions. Maximum calibration for Hz is 5 amperes. C Calibration➏ Add suffix V to catalog number for complete breaker, listed above, when ordering breakers to be used in C ambients. Ambient Compensating Breakers➏ To order, add suffix letter A to standard thermal magnetic breaker catalog number. Available in all standard ratings of EB, EHB, FB and HFB breakers up to ratings of amperes. Factory adder 0%. A Insert collar enclosing conductor as shown. Locate nut on top of conductor and tighten securely with screw and washer. Caution: must surround conductor. Assemble collar on top of conductor as shown. Tighten securely with screw and washer. LFB rrent Limiter Attachment➐ The LFB rrent Limiter is an attachment that bolts to the load end of a standard FB thermal magnetic or magnetic only breaker, providing 00,000 Interrupting Capacity (AIC) at up to volts AC. Limiters for thermal magnetic breakers are listed with Underwriters Laboratories, Inc. rrent limiters must be applied as indicated in the table. Standard LFB terminals are suitable for /AI cable. s thru amperes accept () #4-#, and and amperes accept () #-4/0.➑ Insert collar enclosing conductor and center on extrusion on collar. Install clip with legs on top of conductor and snap end around bottom of collar. Assemble wire clamp to bottom of conductor as shown. Breaker, Limiter For Thermal Magnetic Breakers➑ 5- - For Magnetic Only Breakers➑ 5 0 5 0 LFB0R LFBR LFB00MR LFB005MR LFB00MR LFB05MR LFB00MR LFB0MR LFB0MR LFBMR LFBMR Federal Specification Classifications EB, EHB, FB and HFB breakers meet requirements of Federal Specification W-C-75b as follows: EB: -pole, Class a; -, -poles, Classes 0b, b, b EHB: -pole, Class a; -, -poles, Class b; FB: -, -poles, Class 8a; HFB: -pole, Class a; -, -poles, Class a For all -phase Delta, grounded B phase applications, contact your local tler- Hammer Field Sales Office. ➊ -pole magnetic only breakers supplied in -pole frame with current carrying parts omitted from center pole. ➋ Magnetic only breakers for DC applications require special calibration. Order by description. ➌ Magnetic only breakers include both line and load terminals. ➍ Suffix L on catalog number indicates line and load terminals included. If factory installation is required, specify on order. ➎ Style listed is for package of three terminals. ➏ Not listed with Underwriters Laboratories, Inc. ➐ Cannot be used with plug-in adapters. ➑ s thru amperes can be supplied with terminals for cable only (#4-#). Order by description. March 00
4, Continued PB and PBF Accessories and Modifications Special Breakers➊ Magnetic Only, Front Adjustable➋ Trip Unit Only Magnetic Trip Range, ➌ -Poles➍ Low High For Rear Connected PB Breakers 000 000 000 000 000 000 0 0 000 0 000 0 0 0 00 0 00 00 00 000 000 PB00TM PB0TM PB00TM PB00TM PB00TM PB000TM 7D488G08 For Front Connected PBF Breakers 000 000 000 000 000 000 0 000 0 000 0 0 00 0 00 00 00 000 PBF00TM PBF0TM PBF00TM PBF00TM PBF00TM PBF000TM Bus Bar Connections➐ -Poles PB00TM PB0TM PB00TM PB00TM PB00TM PB000TM 7D488G09 PBF00TM PBF0TM PBF00TM PBF00TM PBF00TM PBF000TM Magnetic Only Breakers➊ For description, refer to Application Data 9-. To order a complete breaker, select trip unit, plus frame and connectors. PB breakers meet the requirements for Class 5a circuit breakers as defined by Federal Specification W-C-75b. Underwriters Laboratories, Inc. Listed Interrupting s Volts AC 4 AC AC DC➊,000 Asym., 5,000 Sym. 5,000 Asym.,,000 Sym. 5,000 Asym.,,000 Sym. 75,000 ➎ For all -phase Delta, grounded B phase applications, contact your local tler- Hammer Field Sales Office. Special Calibrations➊ Special calibration price additions apply to ampere ratings not listed as standard, or for ambients other than C or C. For frequencies other than 0- Hz AC, refer to tler-hammer. See Application Data 9- for information regarding special conditions. C Calibration➊➏ Add suffix V to catalog number for complete breaker or trip unit only, when ordering breakers to be used in C ambients. For CSA, see information below. Canadian Standards Association (CSA) Listing Most standard thermal magnetic molded case circuit breakers listed with Underwriters Laboratories, Inc., and having a UL label are also listed with CSA and may be marked with the CSA monogram. A Bus Bar Connections➐ T Connector (For /AI Bus) Two required per pole. For rear bus connection of breakers thru 000 amperes. Accepts up to four bus bolts. May be rotated. BA000PB C Connector (For /AI Bus) Two required per pole. For rear bus connection of 0 ampere breakers. Breaker 0 BA0PB Cable Connector Fits T Connector and 000 ampere front connected breakers. Accepts four - MCM copper cables. 5C6G04 ➊ Not listed with Underwriters Laboratories, Inc. ➋ Frames, connectors, dimensions and shipping weights are same as thermal magnetic breakers. ➌ Set on high side, adjustable to lower limits. ➍ -pole breakers are supplied in -pole frames with current carrying parts omitted from center pole. ➎ Based on NEMA test procedure. ➏ C or higher calibration not available for 0 ampere trip units. ➐ Shipped separately from breaker. March 00
54 Replacement Molded Case es Molded Case es Molded Case es are Underwriters Laboratories, Inc. Iisted devices and are available only as high magnetic trip type with fixed trip setting. Molded Case es with High Magnetic Trip (Fixed Trip Setting) Catalog Number➊➋ DAWK DAWK EBLK EBLK EBLK EBSLK EHBLK EHBLK EHBLK EHBSLK FBLK FBLK FBLK FBLK FBSLK FB4LK FB4LK JA5WK JA5WSK JA5WK JA5WSK Poles 4 4 Volts 0 77 4 4 4 77/4 77/4 5 5 5 5 Catalog Number➊➋ JBWK JBWSK JBWK JBWSK KA5WK KA5WSK KA5WK KA5WSK KBWK KBWSK KBWK KBWSK LBWK LBWSK LBWK LBWSK LBBWK LBBWSK LBBWK LBBWSK Poles Volts 5 5 5 5 Molded Case Terminal Data MCS Standard Terminals Terminal or Cat. Number s Range Optional Terminals Terminal or Cat. Number s Range DA, LB, LBB TDA only /0- MCM.... EB, EHB, FB FB JA, KA JB, KB 5 TA5LA TAKB #4-/0 #4-4/0 #4- MCM #4- MCM.. T5LA TKB....... #4-4/0 #6- MCM #4- MCM Molded Case es with High Magnetic Trip Trip Setting and Tolerance Frame Trip Setting () Tolerance (%) EB EHB/FB FB DA/LB/LBB JA/KA JB/KB 5 0 00 0 0 0 ±0 ±0 ±0 +0 +0 +0 ➊ Catalog number suffix identification: K = Molded Case with High Magnetic Trip (Fixed Trip Setting) S = Saf-T-Vue cover L = With Line and Load Terminals W= No terminals ➋ Molded case switch dimensions are the same as the equivalent thermal magnetic breaker. Refer to Dimension Sheet 9-7. March 00