SOLA COMPACT ULTRA - Fact Table of Contents Sheets SOLA COMPACT ULTRA SOLA COMPACT ULTRA 1.67 High Index 1 2 SOLA COMPACT ULTRA 1.67 High Index PhotoFusion Gray/Brown 3 4 SOLA COMPACT ULTRA 1.67 High Index Transitions Gray/Brown SOLA COMPACT ULTRA 1.59 Polycarbonatee SOLA COMPACT ULTRA 1.59 PhotoFusion Gray/Brown SOLA COMPACT ULTRA 1.59 Transitions Gray/Brown SOLA COMPACT ULTRA 1.5 SOLA COMPACT ULTRA 1.5 PhotoFusion Gray/Brown SOLA COMPACT ULTRA 1.5 Transitions Gray/Brown 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Carl Zeiss Vision Version 01/ /14
Substrate : 1.67 MR10 Product Name : 73mm COMPACT ULTRA PROGRESSIVE Cat Code: 610 : SEMI-FINISHED BLANKS Reference : FSD9-5-9_2 Date : 8 Jan 2007 Page : 1 of 2 Product Range: Diameter Base Add Power Range Rx Range Recommended 73 mm 1.00 0. to 3. -1 to -5. 73 mm 3.00 0. to 3. to -0. 73 mm 5.00 0. to 3. -0. to +2.00 73 mm 6.00 0. to 3. +2. to +3. 73 mm 7.00 0. to 3. +3. to +6.00 Material & Coating Specifications: Blank Information : Base Type 1.67 (MR10) Refractive Index η d = 1.661 (Helium d line 587.56nm) η e = 1.666 (Mercury e line 546.07nm) Abbe Number ν d = 32 ν e = 32 Density 1.37 g.cm -3 UV Protection 100% UVA and UVB (from 380nm to 280nm as per ISO 8980-3-2003, ANSI Z80-1-2005) Coating Type Ultra-Tough TM True Curve (1.530) Radius True Curve as a Sag @ mm Back Curve (1.530) Center (±1.0mm) Edge Packaged Weight (g) (Based on 2.00 add) 1.00 1.33 398.496 0.785 9.0 +/- 1mm 15.5 78 3.00 3.08 172.078 1.826 8.7 +/- 1mm 12.5 70 5.00 4.93 107.5 2.947 7.0 +/- 1mm 9.0 56 6.00 5.71 92.820 3.430 8.5 +/- 1mm 9.0 56 7.00 6.72 78.869 4.067 9.0 +/- 1mm 8.5 60 Surfacing : Recommended centre & edge thickness for all regions: Power Range Minimum Edge -1 D to D 1.5-1. D to +1. D 2.0 or * 1.0 * +1. D to +3. D 1.0 +4.00 D to +6.00 D 0.5 *es are based on whichever is the limiting factor. For External Distribution Ultra-Tough, is a trademarks of SOLA International Inc. 1 of 18
Reference : FSD9-5-9_2 Date : 8 Jan 2007 Page : 2 of 2 Product Markings : Front Surface :Semi-Visible Markings Front Surface : Ink Markings Back Surface : Coding C L C 2.0 mm Compact ULTRA L 6.5mm 9.5mm 3.0 mm Recommended Range Chart: Minus Cyls -0. -0. -0. -1. -1. -1. -2. -2. -2. -3. -3. -3. +6.00 S +5.00 P H +4.00 E +3.00 R +2.00 E S +1.00 Plano -7.00-8.00-9.00-1 7.00 6.00 5.00 3.00 1.00-0. -0. -0. -1. -1. -1. -2. -2. -2. -3. -3. -3. 2 of 18
PRODUCT FACT SHEET Substrate : 1.67 MR10 PhotoFusion Product Name : COMPACT ULTRA PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : 00239.FS3 Date : 22 March 2013 Page : 1 of 2 Product Range: Product: CAT Code: LGC: Grey HC F45 L6094 Diameter Base Add Power Range Recommended Rx Range 73 1.00 0. to 3. -1 to -5. 73 3.00 0. to 3. to -0. 73 5.00 0. to 3. -0. to +2.00 73 6.00 0. to 3. +2. to +3. 73 7.00 0. to 3. +3. to +6.00 Material & Coating Specifications: Type 1.67 MR-10 TM Refractive Index n d = 1.661 n e = 1.666 Abbe Number d = 32 e = 32 Density 1.37 g.cm -3 UV Protection (ISO) Coated, Activated: 2.0mm Centre UVA: 100 %, UVB: 100 % Coating Type Hard Coated Blank Information: Base True Front (1.530) Radii Back Curve Centre (±1.0mm) Edge 1.00 1.32 401.52 9.0 15.5 3.00 3.05 173.77 8.7 12.5 5.00 4.89 108.38 7.0 9.0 6.00 5.65 93.81 8.5 9.0 7.00 6.67 79.46 9.0 8.5 For External Distribution 2013 Carl Zeiss Vision Inc. PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH. MR-10 is a trademark of Mitsui Chemicals Inc. 3 of 18
-0. -0. -0. -1. -1. -1. -2. -2. -2. -3. -3. -3. -0. -0. -0. -1. -1. -1. -2. -2. -2. -3. -3. -3. Reference : 00239.FS3 Date : 22 March 2013 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range -1 to 1.5 Minimum Edge -1. to +1. 2.0 or * 1.0 * +1. to +3. 1.0 +4.00 to +6.00 0.5 * es are based on whichever is the limiting factor Product Markings: Front Surface: Top Code & Semi-visible Recommended Range Chart: Minus Cyl Convention Ink Markings: Back Surface Coding: +6.00 +5.00 S P H +4.00 E R E S +3.00 +2.00 +1.00 Plano -7.00-8.00-9.00-1 7.00 6.00 5.00 3.00 1.00 4 of 18
PRODUCT FACT SHEET Substrate : 1.67 TRANSITIONS SIGNATURE VII Product Name : COMPACT ULTRA PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : 00434.FS1 Date : 16 December 2013 Page : 1 of 2 Product Range: Product: LGC: Cat Code: Gray HC L6433 V46 Diameter Base Add Power Range Recommended Rx Range 73 1.00 0. to 3. -1 to -5. 73 3.00 0. to 3. to -0. 78 5.00 0. to 3. -0. to +2.00 73 6.00 0. to 3. +2. to +3. 73 7.00 0. to 3. +3. to +6.00 Material & Coating Specifications: Type MR-10 Refractive Index n d = 1.661 n e = 1.666 Abbe Number d = 32 e = 32 Density 1.37 g.cm -3 UV Protection (ISO) Activated: 2.0mm Centre. UVA: 100 %, UVB: 100 % Coating Type Hard Coated Blank Information: Base True Front (1.530) Radii Back Curve Centre (±1.0) Edge at A 1.00 1.33 398. 9.0 15.5 3.00 3.08 172.08 8.7 12.5 5.00 4.93 107.51 7.0 9.0 6.00 5.71 92.82 8.5 9.0 7.00 6.72 78.87 9.0 8.5 For External Distribution 2013 Carl Zeiss Vision Inc. MR-10 is a trademark of Mitsui Chemicals Inc. Transitions is a registered trademark of Transitions Optical Inc. 5 of 18
Reference : 00434.FS1 Date : 16 December 2013 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Edge -1 to 1.5-1. to +1. 2.0 or * 1.0 * +1. to +3. 1.0 +4.00 to +6.00 0.5 * es are based on whichever is the limiting factor. Product Markings: Recommended Range Chart: Front Surface: Top Code Only Minus Cyls -0. -0. -0. -1. -1. -1. -2. -2. -2. -3. -3. -3. Ink Markings: Back Surface Coding: +6.00 S +5.00 P H +4.00 E +3.00 R +2.00 E S +1.00 Plano -7.00-8.00-9.00-1 7.00 6.00 5.00 3.00 1.00-0. -0. -0. -1. -1. -1. -2. -2. -2. -3. -3. -3. 6 of 18
Substrate : POLYCARBONATE Product Name : 72mm COMPACT ULTRA PROGRESSIVE Cat Code: 473 : SEMI-FINISHED BLANKS Reference : FSD6-5-4_1 Date : 19 July 2006 Page : 1 of 2 Product Range: Diameter Base Add Power Range Rx Range Recommended 72 mm 1. 1.00 to 3.00-9.00 to -5. 72 mm 3. 1.00 to 3.00 to -0. 72 mm 5. 1.00 to 3.00-0. to +2.00 72 mm 7. 1.00 to 3.00 +2. to +5.00 Material & Coating Specifications: Blank Information : Base Type Polycarbonate Refractive Index η d = 1.586 η e = 1.590 Abbe Number ν d = 30 ν e = 29 Density 1.20 g.cm -3 UV Protection (ISO) Coated : 1.5 mm Centre UVA : 100 % UVB : 100 % Coating Type Ultra-Tough True Curve (1.530) Radius Sag @ mm Back Curve (1.530) Diameter Center (±1.0mm) Edge 1. 1.62 327.160 0.957-5. 72 7.8 13.4 3. 3.55 149.296 2.108-5. 72 7.7 10.5 5. 5.32 99.624 3.188-5. 72 8.3 8.6 7. 7.43 71.332 4.524-8.00 72 11.0 11.3 Surfacing : Recommended Centre & Edge es Power Range Minimum Edge -9.00 to +2.00 D 1.5 mm or* 1.0 mm* +2. to +5.00 D 0.5 mm * es are based on whichever is the limiting factor. For External Distribution 7 of 18
Reference : FSD6-5-4_1 Date : 19 July 2006 Page : 2 of 2 Product Markings : Front Surface :Semi-Visible Markings Front Surface : Ink Markings Back Surface : Coding 72.0 mm Fitting Center 17.0 mm 34.0 mm R 7.0 mm Dia. 6.5 mm Compact ULTRA 20P CU 9.5 mm 2 mm Geometric Center Blocking Center 3.0 mm Minus Cyls Recommended Range Chart: -0. -0. -0. -1. -1. -1. -2. -2. -2. +5.00 S P +4.00 7. H +3.00 E +2.00 R 5. E +1.00 S Plano 3. -7.00 1. x x x x x x -8.00 x x x x x x x x x x x x x x x x x x x x x x -9.00 x x x x x x x x -3. -3. -3. -4. -0. -4. -0. -4. -0. -5. -5. -5. -1. -1. -1. -2. -2. -2. -3. -3. -3. -4. -4. -4. -5. -5. -5. 8 of 18
PRODUCT FACT SHEET Substrate : POLYCARBONATE PhotoFusion Product Name : COMPACT ULTRA Product Type : SEMI-FINISHED PROGRESSIVE BLANKS Reference : 00238.FS2 Date : 22 March 2012 Page : 1 of 2 Product Range: Brown Grey CAT Code F44 F43 Diameter Base Add Power Range Rx Range Recommended 72 mm 1. 1.00 to 3.00-9.00 to -5. 72 mm 3. 1.00 to 3.00 to -0. 72 mm 5. 1.00 to 3.00-0. to +2.00 72 mm 7. 1.00 to 3.00 +2. to +5.00 Material & Coating Specifications: Type Polycarbonate Refractive Index n d = 1.586 (Helium 'd' line 587.56 nm), n e = 1.590 (Mercury 'e' line 546.07 nm) Abbe Number ν d = 30, ν e = 29 Density 1.20 g.cm -3 UV Protection (ISO) 100% UVA and 100% UVB Coated, Activated : 2.0mm Centre Coating Hard Coated Blank Information: (As measured in 1.530 R.I) Base True Front (1.530) Radii Distance Curve Sag @ mm Back Centre Edge at A 1. 1.57 337.580 0.927-5. 7.8 13.4 3. 3.57 148.459 2.120-5. 7.7 10.5 5. 5.32 99.624 3.188-5. 8.3 8.6 7. 7.43 71.332 4.524-8.00 11.0 11.3 For External Distribution 2012 Carl Zeiss Vision International GmbH. PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH. 9 of 18
Reference : 00238.FS2 Date : 22 March 2012 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range -9.00 to D 1.5 Minimum Edge -1. to +2.00 D 1.5* 1.5* +2. to +4.00 D 1.0 +4. to +5.00 D 0.5 *es are based on whichever is the limiting factor. Product Markings: Front Surface: Semi-Visible Markings Recommended Range Chart: (Minus cyl convention) SPHERE +5.00 +4.00 +3.00 7. +2.00 Front Surface: Ink Markings +1.00 PLANO 5. 3. Back Surface Markings -7.00 1. -8.00-9.00 SPHERE 10 of 18
PRODUCT FACT SHEET Substrate : POLYCARBONATE TRANSITIONS SIGNATURE VII Product Name : COMPACT ULTRA PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : 00416.FS1 Date : 17 December 2013 Page : 1 of 2 Product Range: Product: Gray HC Brown HC LGC: L6424 L6428 Cat Code: V48 V47 Diameter Base Add Power Range Recommended Rx Range 72 1. 1.00 to 3.00-9.00 to -5. 72 3. 1.00 to 3.00 to -0. 72 5. 1.00 to 3.00-0. to +2.00 72 7. 1.00 to 3.00 +2. to +5.00 Material & Coating Specifications: Type Polycarbonate Refractive Index n d = 1.586 n e = 1.590 Abbe Number d = 30 e = 29 Density 1.20 g.cm -3 UV Protection (ISO) UVA: 100% UVB: 100% Coating Type Hard Coated Blank Information: Base True Front (1.530) Radii Back Centre Edge at A 1. 1.57 337.580-5. 7.8 13.4 3. 3.57 148.459-5. 7.7 10.5 5. 5.32 99.624-5. 8.3 8.6 7. 7.43 71.332-8.00 11.0 11.3 For External Distribution 2013 Carl Zeiss Vision Inc. Transitions is a registered trademark of Transitions Optical Inc. 11 of 18
Reference : 00416.FS1 Date : 17 December 2013 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range -9.00 to 1.5 Minimum Edge -1. to +2.00 2.0 or * 1.0 * +2. to +4.00 1.0 +4. to +5.00 0.5 * es are based on whichever is the limiting factor. Product Markings: Front Surface: Top Code Only Ink Markings: Back Surface Coding: No Cast on Code Minus Cyls -0. -0. -0. -1. Recommended Range Chart: -1. -1. -2. -2. -2. +5.00 S P +4.00 7. H +3.00 E +2.00 R E +1.00 5. S Plano 3. -7.00 1. x x x x x x -8.00 x x x x x x x x x x x x x x x x x x x x x x -9.00 x x x x x x x x -3. -3. -3. -0. -0. -4. -4. -4. -5. -5. -5. -0. -1. -1. -1. -2. -2. -2. -3. -3. -3. -4. -4. -4. -5. -5. -5. 12 of 18
Substrate : HARD RESIN Product Name : 72mm COMPACT ULTRA PROGRESSIVE : SEMI-FINISHED BLANKS Cat Codes: HC-558 Unc-474 Reference : FSD9-5-8_1 Date : 19 July 2006 Page : 1 of 2 Product Range: Diameter Base Add Power Range Rx Range Recommended 72 mm 1. 0. to 3. -9.00 to -5. 72 mm 3. 0. to 3. to -0. 72 mm 5. 0. to 3. -0. to +2.00 72 mm 7. 0. to 3. +2. to +5.00 Material & Coating Specifications: Blank Information : Base Type CR39 Refractive Index η d = 1.499 η e = 1.0 Abbe Number ν d = 58 ν e = 56 Density 1.32 g.cm -3 UV Protection (ISO) 2.0 mm Centre UVA : 91 % UVB : 100 % Coating Type Ultra-Tough (Uncoated also available) True Curve (1.530) Radius Sag @ mm Back Curve (1.530) Diameter Center (±1.0mm) Edge 1. 1.59 333.333 0.939 72 12.5 14.0 3. 3.46 153.179 2.054 72 10.5 13.0 5. 5.34 99.1 3.200 72 10.3 10.5 7. 7.41 71.5 4.511 72 14.5 11.5 Surfacing : Recommended Centre & Edge es Power Range USA Market Int l Market All Markets Minimum Edge -9.00 to D 2.0 1.5-1. to +2.00 D 2.0 or * 2.0 or * 1.0 * +2. to +4.00 D 1.0 +4. to +5.00 D 0.5 * es are based on whichever is the limiting factor. For External Distribution 13 of 18
Reference : FSD9-5-8_1 Date : 19 July 2006 Page : 2 of 2 Product Markings : Front Surface :Semi-Visible Markings Front Surface : Ink Markings Back Surface : Coding 72.0 mm 17.0 mm 34.0 mm R 7.0 mm Dia. 6.5 mm Compact ULTRA Fitting Center 13594 1-0R UCH 200 CU C 9.5 mm 2 mm Geometric Center Blocking Center 3.0 mm Recommended Range Chart: Minus Cyls -0. -0. -0. -1. -1. -1. -2. -2. -2. +5.00 S P +4.00 7. H +3.00 E +2.00 R 5. E +1.00 S Plano 3. -7.00 1. x x x x x x -8.00 x x x x x x x x x x x x x x x x x x x x x x -9.00 x x x x x x x x -3. -3. -3. -4. -0. -4. -0. -4. -0. -5. -5. -5. -1. -1. -1. -2. -2. -2. -3. -3. -3. -4. -4. -4. -5. -5. -5. 14 of 18
PRODUCT FACT SHEET Substrate : 1. PhotoFusion Product Name : COMPACT ULTRA Product Type : SEMI-FINISHED PROGRESSIVE BLANKS Reference : 00220.FS1 Date : 21 Mar 2012 Page : 1 of 2 Product Range: Grey Brown CAT Code F41 F42 Diameter Base Add Power Range Recommended Rx Range 72 1. 0. to 3. -9.00 to -5. 72 3. 0. to 3. to -0. 72 5. 0. to 3. -0. to +2.00 72 7. 0. to 3. +2. to +5.00 Material & Coating Specifications: Type Refractive Index 1.5 PhotoFusion n d = 1.2 (Helium d line 587.56nm) n e = 1.4 (Mercury e line 546.07nm) Abbe Number ν d = 54,ν e = 52 Density 1.18 g.cm -3 Luminous Transmittance (clear state) 87% UV Protection (ISO) Coated, Activated : 2.0mm Centre : UVA : 100% UVB : 100% Coating Type Hardcoated Blank Information: (As measured in 1.530 R.I) Base Curve True Front Curve (1.530) Radius Back Curve (1.530) Centre (±1.0mm) Edge at A 1. 1.61 329.19 12.5 14.0 3. 3. 151.43 10.5 13.0 5. 5.34 99. 10.3 10.5 7. 7.42 71.43 14.5 11.5 For External Distribution 2012 Carl Zeiss Vision International GmbH. PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH. 15 of 18
Reference : 00220.FS1 Date : 21 Mar 2012 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range USA Market Int l Market -9.00 to 2.0 1.5 All Markets Minimum Edge -1. to +2.00 2.0 or * 2.0 or * 1.0 * +2. to +4.00 1.0 +4. to +5.00 0.5 *es are based on whichever is the limiting factor. Product Markings: Front Surface: Semi-Visible Markings Recommended Range Chart: (Minus cyl convention) SPHERE +5.00 +4.00 7. +3.00 Front Surface: Ink Markings +2.00 +1.00 5. PLANO 3. Back Surface Markings -7.00 1. -8.00-9.00 SPHERE 16 of 18
PRODUCT FACT SHEET Substrate : 1.5 TRANSITIONS SIGNATURE VII Product Name : COMPACT ULTRA PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : 00362.FS2 Date : 27 November 2013 Page : 1 of 2 Product Range: Product: Brown HC Gray HC LGC: L6390 L6389 Cat Code: V44 V45 Diameter Base Add Power Range Recommended Rx Range 72 1. 0. to 3. -9.00 to -5. 72 3. 0. to 3. to -0. 72 5. 0. to 3. -0. to +2.00 72 7. 0. to 3. +2. to +5.00 Material & Coating Specifications: Type CR-607 Refractive Index n d = 1.497 n e = 1.499 Abbe Number d = 61 e = 57 Density 1.27 g.cm -3 UV Protection (ISO) Activated: 2.0mm Centre. UVA: 100 %, UVB: 100 % Coating Type Hard Coated Blank Information: Base True Front (1.530) Radii Back Curve Centre (±1.0mm) Edge 1. 1.61 329.19 12.5 14.0 3. 3. 151.43 10.5 13.0 5. 5.34 99. 10.3 10.5 7. 7.42 71.43 14.5 11.5 For External Distribution 2013 Carl Zeiss Vision Inc. CR-607 is a registered trademark of PPG Industries Inc. Transitions is a registered trademark of Transitions Optical Inc. 17 of 18
Reference : 00362.FS2 Date : 27 November 2013 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range USA Market Int l Market -9.00 to 2.0 1.5 All Markets Minimum Edge -1. to +2.00 2.0 or * 2.0 or * 1.0 * +2. to +4.00 1.0 +4. to +5.00 0.5 * es are based on whichever is the limiting factor Product Markings: Front Surface: Top Code & Semi-visible Recommended Range Chart: Minus Cyl Convention Ink Markings: Back Surface Coding: -0. -0. -0. -1. -1. -1. -2. -2. +5.00 S P H +4.00 E 7. R E S +3.00 +2.00 5. +1.00 Plano 3. -7.00 x 1. x x x x x -8.00 x x x x x x x x x x x x x x x x x x x x x x -9.00 x x x x x x x x -2. -3. -3. -3. -0. -4. -0. -4. -4. -5. -5. -5. -0. -1. -1. -1. -2. -2. -2. -3. -3. -3. -4. -4. -4. -5. -5. -5. 18 of 18