Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)... 85 Cejn 324 (LPG)... 85 Cejn 181 (Oxygen)... 86 Serie 23... 86 Serie 25/Euro standard... 87 Serie 33... 87 Serie 34... 88 Serie 21 KA (Single shut-off)... 88 Serie 21 KB (Double shut-off)... 89 Serie 96... 89 Serie 27... 90 Serie 83 couplings, 37 nipples... 90 Blowguns... 92 2-BOLT HOSE CLAMPS... 93 HOSE CLAMP, Standard: DIN 3017... 94 Galvanized... 94 Stainless Steel AISI 316... 94 GS POWER CLAMP- Galvanized, Band width 25 mm w/2 screws... 95 GS POWER CLAMP - Stainless Steel AISI 316, Band width 25 mm w/2 screws... 95 Cam Lock Couplings, Aluminium... 96 Cam Lock Couplings, Stainless Steel AISI 316... 98 KC HOSE NIPPLES... 100 HOSE JOINT, Carbon Steel... 101 GL-SERIE ONE PIECE-COUPLINGS, Couplings custom-made for ACR MegaTech and MegaVac... 101 HOSE JOINT... 102 HOSE FITTING, Female BSP... 102 PLUG BSP... 102 HOSE FITTING, Male BSP... 103 ADAPTOR, BSP, Female/Male... 103 HEXAGON NIPPLE, BSP... 104 ADAPTOR, BSP... 104 ELBOW FEMALE/FEMALE BSP... 104 REDUCER, FEMALE/MALE BSP... 105 ELBOW, MALE/FEMALE BSP... 105 TEE, BSP... 106 SOCKEL, BSP... 106 HOSE ELBOW 90, MALE BSP... 106 CRIMPING FERRULE STEEL... 107 CRIMPING FERRULE, STAINLESS STEEL... 107 CRIMPING FERRULE / STAINLESS STEEL, For textile hoses... 108 LOW PRESSURE FERRULE / A-304, Tuboflex... 108 CRIMPING FERRULE, FOR TEXTILE HOSESC6F STEEL... 108 LAUX COUPLINGS, Hose coupling, model 42*... 109 claw couplings, American... 110 CLAW COUPLINGS, European standard DIN 3489... 111 Tank wagon couplings, type TW, Standard DIN 28450... 112 GS-HYDRO SWIVELS... 113 TECHNICAL INFORMATION, Pneumatic fittings... 116 TOLERANCE, Polyurethane (PU) tubes... 116 UNION, MALE... 117 UNION, FEMALE... 117 STRAIGHT CONNECTOR... 118 ELBOW... 118 TEE... 118 NIPPLE... 119 LONG NIPPLE... 119 HOSE MENDER... 120 REDUCER NIPPLE... 120 PLUG... 121 BULK HEAD... 121 SIMPLE BANJO, 360, Rotates under pressure... 122 DOUBLE BANJO, 360, Rotates under pressure... 122 UNION WITH CONTRA NUT... 123 TEE W/SWIVEL... 123 ELBOW W/SWIVEL... 124 MOUNTING TOOL... 124 SILENCER... 125 MANOMETER... 125 MANOMETER... 125 MANOMETER... 125 TEFLONE TUBE... 126 POLYURETHANE TUBE... 126 Automatic Hose Reel, For compressed air... 128 Automatig Hose Reel*, Non-Corrosive Steel, For air and water... 128 Automatic Hose Reel, Serie 809... 129 MANUAL HOSE REELS*... 130 78
intro Quick disconnect couplings Cejn 310 Compatible with Hansen 3000 and 22, GS-Serie 23, Tema 1400 etc. 059101 059102 059103 059104 059105 059106 High flow capacity One-hand operated Low connection force Coupling, female The Series 310 is a universal, pneumatic coupling suitable for a variety of applications and is an industrial standard in the US. It offers high flow and only requires a low connection force, which ensures a safe working environment. Male threads on the couplings and nipples feature pre-applied thread sealant. Series 310 is also available in Vented Safety, Soft-Line and Multi-Link versions. Air flow: 925 l/min WP: 16 bar Temp. area: -20 C to + 100 C Package size: 10 Connection C059101-04 G1/4 C059101-06 G3/8 C059101-08 G1/2 Coupling, male C059102-04 R1/4 C059102-06 R3/8 C059102-08 R1/2 Coupling with hose tail C059103-04 1/4 C059103-05 5/16 C059103-06 3/8 C059103-08 1/2 Nipple, female 059104-02* G1/8 C059104-04 G1/4 C059104-06 G3/8 09104-08* G1/2 Nipple, male C059105-02 R1/8 C059105-04 R1/4 C059105-06 R3/8 059105-08* R1/2 Nipple with hose tail C059106-04 1/4 C059106-05 5/16 C059106-06 3/8 C059106-08 1/2 * See GS-serie 23 Cejn 320 Eurostandard Compatible with GS-Serie 25, Tema 1600 etc. 059107 059108 059109 059110 059111 059112 Coupling, female Extremely high flow capacity Easy to connect Strong and durable The Series 320 is a universal, pneumatic coupling suitable for a variety of applications. It features the original high-flow valve design that all other CEJN pneumatic couplings are based upon. Their popularity has made Series 320 a European standard. The series is easy-to-handle, one-hand operated and offers long service life. Male threads on the couplings and nipples feature pre-applied thread sealant. Series 320 is also available in Vented Safety, Lightweight, Soft-Line and Multi- Link versions. Please refer to the CEJN Fluid range for specialized versions of Series 320 with two-way shutoff (Series 324) and stainless steel construction (Series 326). Air flow: 2100 l/min WP: 16 bar Temp. area: -20 C to + 100 C Package size: 10 Connection C059107-04 G1/4 C059107-06 G3/8 C059107-08 G1/2 Coupling, male C059108-04 R1/4 C059108-06 R3/8 C059108-08 R1/2 Coupling with hose tail C059109-04 1/4 C059109-05 5/16 C059109-06 3/8 C059109-08 1/2 Nipple, female C059110-02 G1/8 C059110-04 G1/4 C059110-06 G3/8 C091010-08 G1/2 Nipple, male C059111-02 R1/8 C059111-04 R1/4 C059111-06 R3/8 C059111-08 R1/2 Nipple with hose tail C059112-04 1/4 C059112-05 5/16 C059112-06 3/8 C059112-08 1/2 ventilation Steam food oil air & pressure & petrol & water Steel Special suction gas & welding Offshore cargo Couplings, clamps & pneumatics valves & flanges technical info 79
Quick disconnect couplings Cejn 331 Compatible with Atlas quick 10 and GS-Serie 33 Cejn 421 Compatible with Atlas quick 15 and GS-Serie 34 059137 059138 059139 059140 059141 059142 059143 059144 059145 059146 059147 059148 Connection Connection Coupling, female C059137-04 G1/4 059137-06* 3/8 059137-08* 1/2 Coupling, male C059138-04 R1/4 C059138-06 R3/8 C059138-08 R1/2 Coupling with hose tail C059139-04 1/4 C059139-05 5/16 C059139-06 3/8 C059139-08 1/2 Nipple, female 059140-02* 1/8 C059140-04 G1/4 059140-06* 3/8 059140-08* 1/2 Nipple, male 059141-02* R1/8 C059141-04 R1/4 C059141-06 R3/8 C059141-08 R1/2 C059179-02 G1/8 C059179-04 G1/4 C059179-06 G3/8 Nipple with hose tail 059142-03* 3/16 C059142-04 1/4 C059142-05 5/16 C059142-06 3/8 * See GS-serie 33 059142-08* 1/2 Air flow: 1600 l/min WP: 16 bar Temp. area: -20 C to +100 C Material: Carbon steel in coupling and nipple Application: Tools, auto, compressed air, industry, machine builders, compressors. Package size: 10 Coupling, female 059143-04* 1/4 059143-06* 3/8 C059143-08 G1/2 Coupling, male 059144-04* 1/4 C059144-06 R3/8 C059144-08 R1/2 Coupling with hose tail 059145-04* 1/4 059145-05* 5/16 C059145-06 3/8 C059145-08 1/2 Nipple, female 059146-02* 1/8 C059146-04 G1/4 C059146-06 G3/8 C059146-08 G1/2 Nipple, male 059147-02* 1/8 C059147-04 R1/4 C059147-06 R3/8 C059147-08 R1/2 C059180-06 G3/8 C059180-08 G1/2 Nipple with hose tail 059148-04* 1/4 059148-05* 5/16 C059148-06 3/8 C059148-08 1/2 C059148-10 5/8 * See GS-serie 34 Air flow: 3200 l/min WP: 10 bar Temp. area: -20 C to +100 C Material: Carbon steel in coupling and nipple Application: Tools, auto, compressed air, industry, machine builders, compressors. Package size: 10 80
intro Quick disconnect couplings Cejn 223 Compatible with GS-Serie 2IKA 059125 059126 059127 059128 059129 059130 Coupling, female Connection C059125-02 G1/8 C059125-04 G1/4 059125-06* 3/8 Coupling, male C059126-02 G1/8 C059126-04 G1/4 059126-06* 3/8 Coupling with hose tail C059127-04 1/4 059127-05* 5/16 059127-06* 3/8 059127-08* 1/2 Nipple, female C059128-02 G1/8 C059128-04 G1/4 059128-06* 3/8 059128-08* 1/2 Nipple, male C059129-02 G1/8 C059129-04 G1/4 059129-06* 3/8 059129-08* 1/2 Nipple with hose tail C059130-04 1/4 059130-05* 5/16 059130-06* 3/8 059130-08* 1/2 * See GS-serie 2IKA Interchangeable with several other brands Small external dimensions Robust design Series 223 consists of couplings and nipples, suitable for compressed air, as well as fluid and vacuum applications. All the products in series 223 have small external dimensions, which makes them practical when space is tight. Despite the dimensions, the design is robust and sturdy. The products in Series 223 are interchangeable with several other brands with comparable size. Air flow: 535 l/min WP: 15 bar Temp. area: -20 C to + 70 C Package size: 10 Stainless steel upon request. Cejn 341 Compatible with GS-Serie 96 059113 059114 059115 059116 059117 059118 Coupling, female Connection C059113-04 G1/4 C059113-06 G3/8 C059113-08 G1/2 Coupling, male C059114-04 R1/4 C059114-06 R3/8 Coupling with hose tail C059115-04 1/4 C059115-05 5/16 C059115-06 3/8 059115-08* 1/2 Nipple, female C059116-04 G1/4 C059116-06 G3/8 C059116-08 G1/2 Nipple, male C059117-04 R1/4 C059117-06 R3/8 C059117-08 R1/2 Nipple with hose tail C059118-04 1/4 C059118-05 5/16 C059118-06 3/8 * See GS-serie 96 059118-08* 1/2 Series 341 feature a one-hand operation during connection and has an integrated safety feature that guards against unintentional disconnection. Offering an extremely high airflow rate and a grip-friendly locking sleeve makes it well suited for air cushion inflation and diving applications. Its nickel-plated brass construction makes it a perfect fit for use in damp/wet and corrosive environments. The couplings and nipples are available in a wide range of connections. Air flow: 1950 l/min WP: 35 bar Temp. area: -30 C to +100 C Package size: 10-50 ventilation Steam food oil air & pressure & petrol & water Steel Special suction gas & welding Offshore cargo Couplings, clamps & pneumatics valves & flanges technical info 81
Quick disconnect couplings Cejn 410 Compatible with GS-Serie 27, Tema 1700 Cejn 550 Compatible with Hansen 5000 and Serie 83 couplings, 37 nipples 059119 059120 059121 059122 059123 059124 059149 059150 059151 059152 059153 059154 Connection Connection Coupling, female 059119-04* 1/4 C059119-06 G3/8 C059119-08 G1/2 Coupling, male 059120-04* 1/4 C059120-06 R3/8 C059120-08 R1/2 Coupling with hose tail 059121-04* 1/4 059121-05* 5/16 C059121-06 3/8 C059121-08 1/2 Nipple, female C059122-04 G1/4 C059122-06 G3/8 C059122-08 G1/2 Nipple, male C059123-04 R1/4 C059123-06 R3/8 C059123-08 R1/2 Nipple with hose tail C059124-04 1/4 C059124-05 5/16 C059124-06 3/8 C059124-08 1/2 * See GS-serie 27 Extremely high flow capacity One-hand operated Strong and durable The Series 410 is a universal, pneumatic coupling suitable for a variety of applications. The coupling is an original CEJN design that has become a European standard. It offers high flow and only requires a low connection force, which ensures a safe working environment. The Series is one-hand operated and offers long service life. A wide range of connections is available, as well as anti-hose whip nipples. Steel front parts are standard. Series 410 is also available in a Vented Safety version. Please refer to the CEJN Fluid range for specialized versions of Series 410 with brass nipples (Series 411), high-pressure straight-through design (Series 412), two-way shutoff (Series 414), and stainless steel construction (Series 416). Air flow: 3900 l/min WP: 16 bar Temp. area: -20 C to +100 C Package size: 8-50 Coupling, female 059149-04* 1/4 C059149-06 G3/8 C059149-08 G1/2 C059149-12 G3/4 Coupling, male 059150-04* 1/4 C059150-06 R3/8 C059150-08 R1/2 C059150-12 R3/4 Coupling with hose tail 059151-04* 1/4 059151-05* 5/16 059151-06* 3/8 C059151-08 1/2 C059151-12 3/4 Nipple, female 059152-02* 1/8 059152-04* 1/4 C059152-06 G3/8 C059152-08 G1/2 059152-12* 3/4 Nipple, male 059153-02* 1/8 C059153-04 R1/4 C059153-06 R3/8 C059153-08 R1/2 C059153-12 R3/4 Nipple with hose tail 059154-04* 1/4 059154-05* 5/16 C059154-06 3/8 C059154-08 1/2 C059154-12 3/4 * Available on request Series 550 couplings feature an easy-to-grip design and require only a low connection force. They are smaller, more compact and generate higher flows than comparable designs. Series 550 couplings have an extremely low noise level upon disconnection, and is also available in a Vented Safety version. Included in the series are anti-hose whip nipples. Air flow: 3750 l/min WP: 16 bar Temp. area: -20 C to +100 C Application: Tools, auto, compressed air, industry, machine builders, compressors. Package size: 5-25 82
intro Quick disconnect couplings Cejn 342 059155 059156 059157 059160 059161 059162 Coupling, female Connection C059155-04 G1/4 C059155-06 G3/8 C059155-08 G1/2 Coupling, male C059156-04 R1/4 C059156-06 R3/8 C059156-08 R1/2 Coupling with hose tail C059157-04 6.3 mm (1/4 ) C059157-05 8 mm (5/16 ) C059157-06 10 mm (3/8 ) C059157-08 13 mm (!/2 ) Nipple, female C059160-04 G1/4 C059160-06 G3/8 C059160-08 G1/2 Nipple, male C059161-04 R1/4 C059161-06 R3/8 C059161-08 R1/2 Nipple with hose tail C059162-04 6.3 mm (1/4 ) C059162-06 10 mm (3/8 ) C059162-08 13 mm (1/2 ) * Available on request Automatic safety-locking feature Extremely high flow capacity One-hand operated Series 342 couplings withstand extremely rough handling in extra tough applications. The Series features a zinc-plated steel construction with a locking sleeve made of hardened zinc-plated steel. The Series offers a wide range of connections, as well as anti-hose whip nipples. The automatic safety-locking feature prevents unintentional disconnection. Cejn 347 059169 059170 059171 059172 059173 059174 Coupling, female Connection C059169-06 G3/8 Coupling, male C059170-06 G3/8 Coupling with hose tail C059171-06 10.0 mm (3/8 ) Nipple, female C059172-06 G3/8 Nipple, male C059173-06 G3/8 Nipple with hose tail C059174-06 10.0 mm (3/8 ) Developed to prevent potentially dangerous cross-connections in industrial applications, CEJN Series 347 nipples are noninterchangable with any other CEJN series couplings. The series is useful in applications with multiple access points for different media, such as breathing air, compressed air, and gas. The double shut-off series has a valved nipple. The special valve design of both the coupling and nipple provide an extremely high rate of airflow. Like most CEJN breathing air series, Series 347 offers one-hand-operated connection, an integrated safety feature that guards against unintentional disconnection, and a grip-friendly locking sleeve. Nominal flow diameter: 6.2 mm (1/4 ) Air flow: 1100 l/min (38.8 CFM) Max. working pressure: 35 bar (510 PSI) Min. burst pressure: 140 bar (2030 PSI) Temperature range: -30 C +100 C (-22 F +212 F) Material coupling: Nickel-plated brass Material nipple: Nickel-plated brass Material seal: NBR ventilation Steam food oil air & pressure & petrol & water Steel Special suction gas & welding Offshore cargo Couplings, clamps & pneumatics Please refer to the CEJN Breathing Air range for an all brass version (Series 341). Nominal flow diameter: 7.4 mm (9/32 ) Air flow: 1950 l/min (68.8 CFM) Max. working pressure: 35 bar (510 PSI) Min. burst pressure: 140 bar (2030 PSI) Connection force: 103.0 N Temperature range: -30 C +100 C (-22 F +212 F) Material coupling: Zinc-plated steel Material nipple: Hardened zinc-plated steel valves & flanges technical info 83
Quick disconnect couplings Cejn 220 Quick disconnect couplings for gas In-built safety against unintentional disconnection. Double seal provides extra safety. Connection with other coupling/nipple types are impossible. Color coded according to international norms Cejn 171 (Acetylen) 059184 059182 059180 059185 059183 059181 Connection Coupling, female C059184-02 G1/8 C059184-04 G1/4 C059184-06 G3/8 Coupling, male C059182-02 R1/8 C059182-04 R1/4 C059182-06 R3/8 Coupling with hose tail C059180-03 5.0 mm (3/16 ) C059180-04 6.3 mm (1/4 ) C059180-05 8.0 mm (5/16 ) C059180-06 10.0 mm (3/8 ) Nipple, female C059185-02 G1/8 C059185-04 G1/4 C059185-06 G3/8 Nipple, male C059183-02 R1/8 C059183-04 R1/4 C059183-06 R3/8 Nipple with hose tail C059181-03 5.0 mm (3/16 ) C059181-04 6.3 mm (1/4 ) C059181-05 8.o mm (5/16 ) C059181-06 10.0 mm (3/8 ) 059191 059190 059193 059192 Connection Coupling with valve, female C059191-06 G3/8 Coupling with valve, hose tail C059190-03 3/16" C059190-04 1/4" C059190-05 5/16" C059190-06 3/8" Nipple without valve, female C059193-06 G3/8 Nipple without valve, hose tail C059192-03 3/16" C059192-04 1/4" C059192-05 5/16" C059192-06 3/8" Gas flow: 720 l/min Max WP: 10 bar Temperature: -30 C - +100 C Material: Coated brass/aluminium Gasket material: EPDM High flow capacity Small external dimensions One-hand operated Series 220 couplings are suitable for compressed air, as well as fluid and vacuum applications. They offer high flow capacity for a wide range of applications. Safety rings to prevent unintentional disconnection are available on request. Please refer to the CEJN Fluid range for specialized versions of Series 220 with brass nipples (Series 221). Refer to the CEJN Breathing Air range for Series 221 that offers an easy-to-grip locking sleeve. Nominal flow diameter: 5.0 mm (3/16 ) Air flow: 580 l/min (20.5 CFM) Max. working pressure: 35 bar (510 PSI) Min. burst pressure: 140 bar (2030 PSI) Temperature range: -30 C +100 C (-22 F +212 F) Material coupling: Nickel-plated steel Material nipple: Hardened zinc-plated steel 84
technical info valves & flanges ventilation Steam food oil air & pressure & petrol & water Couplings, clamps & pneumatics Offshore cargo intro Quick disconnect couplings for gas In-built safety against unintentional disconnection. Double seal provides extra safety. Connection with other coupling/nipple types are impossible. Color coded according to international norms 059187 059186 059189 059188 Cejn 172 (LPG) Coupling with valve, female Connection C059187-06 G3/8 Coupling with valve, hose tail C059186-03 3/16" C059186-04 1/4" C059186-05 5/16" C059186-06 3/8" Nipple without valve, female gas & welding C059189-06 G3/8 Nipple without valve, hose tail C059188-03 3/16" C059188-04 1/4" C059188-05 5/16" C059188-06 3/8" Gas flow: Max WP: Temperature: Material: Gasket material: 720 l/min 10 bar -30 C - +100 C Coated brass/aluminium Nitril 059194 059195 Cejn 324 (LPG) Coupling with valve, female Connection C059194-06 G1/4 Nipple with valve, female C059195-06 G1/4" Gas flow: 720 l/min Max WP: 10 bar Temperature: -30 C - +100 C Material: Chromium plated Gasket material: Nitril With safety lock ring Dust protection included Steel Special suction 85
Quick disconnect couplings for gas In-built safety against unintentional disconnection. Double seal provides extra safety. Connection with other coupling/nipple types are impossible. Color coded according to international norms Cejn 181 (Oxygen) Quick disconnect couplings COUPLING, HOSE CLAMPS, PNEUMATICS Serie 23 Compatible with Hansen 3000 and 22, Cejn 310, Tema 1400 etc. 059101 059102 059103 059104 059105 059106 059197 059196 059199 059198 Coupling with valve, female Connection C059197-06 G3/8" Coupling with valve, hose tail C059196-03 3/16" C059196-04 1/4" C059196-05 5/16" C059196-06 3/8" Nipple without valve, female C059199-06 G3/8" Nipple without valve, hose tail C059198-03 3/16" C059198-04 1/4" C059198-05 5/16" C059198-06 3/8" Gas flow: Max WP: Temperature: Material: Gasket material: 720 l/min 10 bar -30 C - +100 C Coated brass/aluminium Nitril EPDM Hose ID mm. Thread dim. Coupling, female 059101-04 1/4 1/4 059101-06 3/8 3/8 059101-08 1/2 1/2 Coupling, male 059102-04 1/4 1/4 059102-06 3/8 3/8 059102-08 1/2 1/2 Coupling with hose tail 059103-04 1/4 1/4 059103-05 5/16 5/16 059103-06 3/8 3/8 059103-08 1/2 1/2 Nipple, female 059104-02 1/8 1/8 059104-04 1/4 1/4 059104-06 3/8 3/8 09104-08 1/2 1/2 Nipple, male 059105-02 1/8 1/8 059105-04 1/4 1/4 059105-06 3/8 3/8 059105-08 1/2 1/2 Nipple with hose tail 059106-04 1/4 1/4 059106-05 5/16 5/16 059106-06 3/8 3/8 059106-08 1/2 1/2 Air flow: 900 l/min WP: 35 bar Temp. area: -20 C to + 100 C Application: Tools, auto, compressed air, industry, machine builders, compressors. Package size: 10 86
ventilation Steam food oil air & pressure & petrol & water gas & welding Offshore cargo technical info intro Quick disconnect couplings Serie 25/Euro standard Compatible with Cejn 320, Tema 1600 etc. 059107 059108 059109 059110 059111 059112 Hose ID mm. Thread dim. Coupling, female 059107-04 1/4 1/4 059107-06 3/8 3/8 059107-08 1/2 1/2 Coupling, male 059108-04 1/4 1/4 059108-06 3/8 3/8 059108-08 1/2 1/2 Coupling with hose tail 059109-04 1/4 1/4 059109-05 5/16 5/16 059109-06 3/8 3/8 059109-08 1/2 1/2 Nipple, female 059110-02 1/8 1/8 059110-04 1/4 1/4 059110-06 3/8 3/8 091010-08 1/2 1/2 Nipple, male 059111-02 1/8 1/8 059111-04 1/4 1/4 059111-06 3/8 3/8 059111-08 1/2 1/2 Nipple with hose tail 059112-04 1/4 1/4 059112-05 5/16 5/16 059112-06 3/8 3/8 059112-08 1/2 1/2 Serie 33 Compatible with Atlas quick 10 059137 059138 059139 059140 059141 059142 Hose ID mm. Thread dim. Coupling, female 059137-04 1/4 1/4 059137-06 3/8 3/8 059137-08 1/2 1/2 Coupling, male 059138-04 1/4 1/4 059138-06 3/8 3/8 0591038-08 1/2 1/2 Coupling with hose tail 059139-04 1/4 1/4 059139-05 5/16 5/16 059139-06 3/8 3/8 059139-08 1/2 1/2 Nipple, female 059140-02 1/8 1/8 059140-04 1/4 1/4 059140-06 3/8 3/8 059140-08 1/2 1/2 Nipple, male 059141-02 1/8 1/8 059141-04 1/4 1/4 059141-06 3/8 3/8 059141-08 1/2 1/2 Couplings, clamps & pneumatics valves & flanges Nipple with hose tail 059142-04 1/4 1/4 059142-05 5/16 5/16 059142-06 3/8 3/8 059142-08 1/2 1/2 Steel Special suction Air flow: 1800 l/min WP: 35 bar Temp. area: -20 C to + 100 C Application: Tools, auto, compressed air, industry, machine builders, compressors. Package size: 10 Air flow: 1400 l/min WP: 35 bar Temp. area: -20 C to +100 C Application: Tools, auto, compressed air, industry, machine builders, compressors. Package size: 10 87
Quick disconnect couplings Serie 34 Compatible with Atlas quick 15 Serie 21 KA (Single shut-off) 059143 059144 059145 059146 059147 059148 059125 059126 059127 059128 059129 059130 Hose ID mm. Thread dim. Coupling, female 059143-04 1/4 1/4 059143-06 3/8 3/8 059143-08 1/2 1/2 Coupling, male 059144-04 1/4 1/4 059144-06 3/8 3/8 059144-08 1/2 1/2 Coupling with hose tail 059145-04 1/4 1/4 059145-05 5/16 5/16 059145-06 3/8 3/8 059145-08 1/2 1/2 Nipple, female 059146-02 1/8 1/8 059146-04 1/4 1/4 059146-06 3/8 3/8 091046-08 1/2 1/2 Nipple, male 059147-02 1/8 1/8 059147-04 1/4 1/4 059147-06 3/8 3/8 059147-08 1/2 1/2 Nipple with hose tail 059148-04 1/4 1/4 059148-05 5/16 5/16 059148-06 3/8 3/8 059148-08 1/2 1/2 Hose ID mm. Thread dim. Coupling, female 059125-04 1/4 1/4 059125-06 3/8 3/8 Coupling, male 059126-04 1/4 1/4 059126-06 3/8 3/8 Coupling with hose tail 059127-04 1/4 1/4 059127-05 5/16 5/16 059127-06 3/8 3/8 059127-08 1/2 1/2 Nipple, female 059128-02 1/8 1/8 059128-04 1/4 1/4 059128-06 3/8 3/8 059128-08 1/2 1/2 Nipple, male 059129-02 1/8 1/8 059129-04 1/4 1/4 059129-06 3/8 3/8 059129-08 1/2 1/2 Nipple with hose tail 059130-04 1/4 1/4 059130-05 5/16 5/16 059130-06 3/8 3/8 059130-08 1/2 1/2 Air flow: WP: Temp. area: Application: Package size: 2550 l/min 35 bar -20 C to +100 C Tools, auto, compressed air, industry, machine builders, compressors. nm10 Air flow: 560 l/min WP: 35 bar Temp. area: -20 C to + 100 C Application: Tools for compressed air, pneumatics, medical equipment, laboratories etc. Package size: 10 Stainless steel upon request. 88
ventilation Steam food oil air & pressure & petrol & water technical info intro Quick disconnect couplings Serie 21 KB (Double shut-off) 059131 059132 059133 059134 059135 059136 Hose ID mm. Thread dim. Coupling, female 059131-04 1/4 1/4 059131-06 3/8 3/8 059131-08 1/2 1/2 Coupling, male 059132-04 1/4 1/4 059132-06 3/8 3/8 059132-08 1/2 1/2 Coupling with hose tail 059133-04 1/4 1/4 059133-05 5/16 5/16 059133-06 3/8 3/8 059133-08 1/2 1/2 Nipple, female 059134-02 1/8 1/8 059134-04 1/4 1/4 059134-06 3/8 3/8 091034-08 1/2 1/2 Nipple, male 059135-02 1/8 1/8 059135-04 1/4 1/4 059135-06 3/8 3/8 059135-08 1/2 1/2 Nipple with hose tail 059136-04 1/4 1/4 059136-05 5/16 5/16 059136-06 3/8 3/8 059136-08 1/2 1/2 Air flow: 310 l/min WP: 35 bar Temp. area: -20 C to + 100 C Application: Tools for compressed air, pneumatics, medical equipment, laboratories, etc. Package size: 10 Stainless steel upon request. Valves in both coupling and nipple. Serie 96 Air breathing coupling 059113 059114 059115 059116 059117 059118 Hose ID mm. Thread dim. Coupling, female 059113-04 1/4 1/4 059113-06 3/8 3/8 059113-08 1/2 1/2 Coupling, male 059114-04 1/4 1/4 059114-06 3/8 3/8 Coupling with hose tail 059115-04 1/4 1/4 059115-06 3/8 3/8 059115-08 1/2 1/2 gas & welding Offshore cargo Couplings, clamps & pneumatics valves & flanges Nipple, female 059116-04 1/4 1/4 059116-06 3/8 3/8 059116-08 1/2 1/2 Nipple, male 059117-04 1/4 1/4 059117-06 3/8 3/8 Nipple with hose tail 059118-04 1/4 1/4 059118-06 3/8 3/8 059118-08 1/2 1/2 Air flow: 1700 l/min Temp. area: -20 C to +100 C Application: Air breathing equipment, welding and cutting techniques, diving equipment etc. Package size: 10 Steel Special suction 89
Quick disconnect couplings Serie 27 Compatible with Cejn 410, Tema 1700 Serie 83 couplings, 37 nipples Compatible with Hansen 5000, Cejn 550 059119 059120 059121 059122 059123 059124 059149 059150 059151 059104 059152 059153 Hose ID mm. Thread dim. Coupling, female 059119-04 1/4 1/4 059119-06 3/8 3/8 059119-08 1/2 1/2 Coupling, male 059120-04 1/4 1/4 059120-06 3/8 3/8 059120-08 1/2 1/2 Coupling with hose tail 059121-04 1/4 1/4 059121-05 5/16 5/16 059121-06 3/8 3/8 059121-08 1/2 1/2 Nipple, female 059122-04 1/4 1/4 059122-06 3/8 3/8 059122-08 1/2 1/2 Nipple, male 059123-04 1/4 1/4 059123-06 3/8 3/8 059123-08 1/2 1/2 Nipple with hose tail 059124-04 1/4 1/4 059124-05 5/16 5/16 059124-06 3/8 3/8 059124-08 1/2 1/2 Air flow: 3500 l/min WP: 35 bar Temp. area: -20 C to +100 C Application: Large air tools, construction machines, machine builders etc. Package size: 10 Hose ID mm. Thread dim. Coupling, female 059149-04 1/4 1/4 059149-06 3/8 3/8 059149-08 1/2 1/2 059149-12 3/4 3/4 Coupling, male 059150-04 1/4 1/4 059150-06 3/8 3/8 059150-08 1/2 1/2 059150-12 3/4 3/4 Coupling with hose tail 059151-04 1/4 1/4 059151-05 5/16 5/16 059151-06 3/8 3/8 059151-08 1/2 1/2 059151-12 3/4 3/4 Nipple, female 059152-02 1/8 1/8 059152-04 1/4 1/4 059152-06 3/8 3/8 059152-08 1/2 1/2 059152-12 3/4 3/4 Nipple, male 059153-02 1/8 1/8 059153-04 1/4 1/4 059153-06 3/8 3/8 059153-08 1/2 1/2 059153-12 3/4 3/4 Nipple with hose tail 059154-04 1/4 1/4 059154-05 5/16 5/16 059154-06 3/8 3/8 059154-08 1/2 1/2 059154-12 3/4 3/4 Air flow: 2350 l/min WP: 35 bar Temp. area: -20 C to +100 C Application: Tools, auto, compressed air, industry, machine builders, compressors. Package size: 10 90
ventilation Steam food oil air & pressure & petrol & water technical info gas & welding Offshore cargo Couplings, clamps & pneumatics valves & flanges intro GS-Hydro offer an extensive range of high quality system components for use in the Food and Beverage industy Steel Special suction 91
Part. no Tube C059200-04 G1/4 thread Fixed tube CEJN BLOWGUNS - High blowing force - Easily regulated infinite flow - Ergonomic, comfortable controls The CEJN Series 208 blowgun has a valve package that enables it to handle both air as well as non-explosive fluids. The Seires is offered in several styles, including standard full-flow, noisereducing Star-Tip, and a pressure-regulated safety version. Various tubes and tips are available to meet specific application requirements. Technical data Min. burst pressure: 64 bar (930 PSI) Material blowgun: POM (body), brass (valve, tube) Media: Air and non-explosive water based liquids Temperature range: -20 C +60 C (-4 F +140 F) Flow capacity is measured at 6 bar (87 PSI) inlet pressure, and pressure drop at 0.5 bar (7 PSI). 92
ventilation Steam food oil air & pressure & petrol & water technical info valves & flanges intro 2-BOLT HOSE CLAMPS Application: All-round clamp which ensures good grip around the hose. Ideal for the oil industry, mining, construction and other industries. Galvanized Steel. Part. no For hose OD 057111-22 17-22 mm 057111-29 22-29 mm 057111-32 27-32 mm 057111-49 39-49 mm 057111-60 48-60 mm 057111-76 60-76 mm 057111-94 77-94 mm 057111-115 94-115 mm HEAVY DUTY 057112-125 102-125 mm 057112-128 114-128 mm 057112-144 130-144 mm 057112-151 144-151 mm 057112-165 151-165 mm 057112-192 165-192 mm 057112-208 195-208 mm 057112-225 210-225 mm 057112-239 227-239 mm 057112-289 252-289 mm 057112-330 300-330 mm 057112-355 310-355 mm 057112-381 335-381 mm Offshore cargo Couplings, clamps & pneumatics 057112-344 382-344 mm gas & welding Other dimensions available upon request. Steel Special suction 93
HOSE CLAMP Standard: DIN 3017 Galvanized steel Part. no Outer hose dim/ band width Stainless Steel AISI 316 Package 057201-016 8-16/9mm 200 057201-022 12-22/9mm 200 057201-027 16-27/12mm 200 057201-032 20-32/12mm 200 057201-040 25-40/12mm 200 057201-045 30-45/12mm 200 057201-050 35-50/12mm 200 057201-060 40-60/12mm 200 057201-070 50-70/12mm 200 057201-080 60-80/12mm 200 057201-090 70-90/12mm 100 057201-100 80-100/12mm 100 057201-110 90-110/12mm 100 057201-120 100-120/12mm 100 057201-130 110-130/12mm 100 057201-140 120-140/12mm 100 057201-150 130-150/12mm 100 057201-160 140-160/12mm 100 057201-170 150-170/12mm 100 057201-180 160-180/12mm 100 057201-190 170-190/12mm 50 057201-200 180-200/12mm 50 057201-210 190-210/12mm 50 057201-220 200-220/12mm 50 Part. no Outer hose dim/ band width Package 0572016-016 8-16/9mm 200 0572016-022 12-22/9mm 200 0572016-027 16-27/12mm 200 0572016-032 20-32/12mm 200 0572016-035 23-35/12mm 200 0572016-040 25-40/12mm 200 0572016-050 32-50/12mm 200 0572016-060 40-60/12mm 200 0572016-070 50-70/12mm 200 0572016-080 60-80/12mm 100 0572016-090 70-90/12mm 100 0572016-100 80-100/12mm 100 0572016-110 90-110/12mm 100 0572016-120 100-120/12mm 100 0572016-130 110-130/12mm 100 0572016-140 120-140/12mm 100 0572016-150 130-150/12mm 100 0572016-160 140-160/12mm 100 0572016-170 150-170/12mm 50 0572016-180 160-180/12mm 50 0572016-190 170-190/12mm 50 0572016-200 180-200/12mm 50 0572016-210 190-210/12mm 50 0572016-220 200-220/12mm 50 94
technical info valves & flanges Couplings, clamps & pneumatics ventilation Steam food oil air & pressure & petrol & water Offshore cargo intro GS POWER CLAMP- Band width 25 mm w/2 screws Galvanized steel Part. no Outer hose dim/ band width 057001-040 32-40 mm 057001-045 36-45 mm 057001-055 45-55 mm 057001-060 50-60 mm 057001-065 55-65 mm 057001-070 60-70 mm 057001-075 65-75 mm 057001-085 75-85 mm 057001-095 85-95 mm 057001-105 95-105 mm 057001-110 100-110 mm 057001-120 110-120 mm 057001-130 120-130 mm 057001-140 130-140 mm 057001-150 140-150 mm 057001-165 150-165 mm 057001-170 155-170 mm 057001-180 165-180 mm 057001-185 170-185 mm 057001-195 180-195 mm 057001-215 200-215 mm 057001-235 220-235 mm 057001-255 240-255 mm 057001-275 260-275 mm Application: All-round clamp which ensures good grip around the hose. Ideal for the oil industry, mining, construction and other industries. GS POWER CLAMP - Band width 25 mm w/2 screws Stainless Steel AISI 316 Part. no Outer hose dim/ band width 057016-040 32-40 mm 057016-045 36-45 mm 057016-055 45-55 mm 057016-060 50-60 mm 057016-065 55-65 mm 057016-070 60-70 mm 057016-075 65-75 mm 057016-085 75-85 mm 057016-095 85-95 mm 057016-100 90-100 mm 057016-105 95-105 mm 057016-110 100-110 mm 057016-115 105-115 mm 057016-120 110-120 mm 057016-130 120-130 mm 057016-140 130-140 mm 057016-150 140-150 mm 057016-165 150-165 mm 057016-170 155-170 mm 057016-180 165-180 mm 057016-195 180-195 mm 057016-215 200-215 mm 057016-235 220-235 mm 057016-255 240-255 mm 057016-275 260-275 mm gas & welding Other dimensions available upon request. Steel Special suction 95
Cam Lock Couplings, Aluminium Application: Low pressure quick disconnect couplings, suitable for oils, petrol, chemicals, water etc. Material: Aluminium and stainless steel AISI 316* Thread types: BSP and NPT Aluminium, BSP Work pressure: 3/4-2 = 17 bar 2 1/2 = 10 bar 3-4 = 7 bar A 059101-12 3/4 059101-16 1 059101-20 1 1/4 059101-24 1 1/2 059101-32 2 059101-48 3 059101-64 4 059101-80 5 059101-96 6 E 059005-12 3/4 059005-16 1 059005-20 1 1/4 059005-24 1 1/2 059005-32 2 059005-48 3 059005-64 4 059005-80 5 059005-96 6 B 059202-12 3/4 059202-16 1 059202-20 1 1/4 059202-24 1 1/2 059202-32 2 059202-48 3 059202-64 4 059202-80 5 059202-96 6 F 059606-12 3/4 059606-16 1 059606-20 1 1/4 059606-24 1 1/2 059606-32 2 059606-48 3 059606-64 4 059606-80 5 059606-96 6 C 059003-12 3/4 059003-16 1 059003-20 1 1/4 059003-24 1 1/2 059003-32 2 059003-48 3 059003-64 4 059003-80 5 059003-96 6 DC 059007-12 3/4 059007-16 1 059007-20 1 1/4 059007-24 1 1/2 059007-32 2 059007-48 3 059007-64 4 059007-80 5 059007-96 6 D 059404-12 3/4 059404-16 1 059404-20 1 1/4 059404-24 1 1/2 059404-32 2 059404-48 3 059404-64 4 059404-80 5 059404-96 6 DP 059008-12 3/4 059008-16 1 059008-20 1 1/4 059008-24 1 1/2 059008-32 2 059008-48 3 059008-64 4 059008-80 5 059008-96 6 96
intro Aluminium, NPT Cam Lock Couplings, Aluminium Application: Low pressure quick disconnect couplings, suitable for oils, petrol, chemicals, water etc. Material: Aluminium and stainless steel AISI 316* Thread types: BSP and NPT A 059001-12 3/4 059001-16 1 059001-20 1 1/4 059001-24 1 1/2 059001-32 2 059001-48 3 059001-64 4 059001-80 5 059001-96 6 B 059002-12 3/4 059002-16 1 059002-20 1 1/4 059002-24 1 1/2 059002-32 2 059002-48 3 059002-64 4 059002-80 5 059002-96 6 C 059003-12 3/4 059003-16 1 059003-20 1 1/4 059003-24 1 1/2 059003-32 2 059003-48 3 059003-64 4 059003-80 5 059003-96 6 E 059005-12 3/4 059005-16 1 059005-20 1 1/4 059005-24 1 1/2 059005-32 2 059005-48 3 059005-64 4 059005-80 5 059005-96 6 F 059006-12 3/4 059006-16 1 059006-20 1 1/4 059006-24 1 1/2 059006-32 2 059006-48 3 059006-64 4 059006-80 5 059006-96 6 DC 059007-12 3/4 059007-16 1 059007-20 1 1/4 059007-24 1 1/2 059007-32 2 059007-48 3 059007-64 4 059007-80 5 059007-96 6 Work pressure: 3/4-2 = 17 bar 2 1/2 = 10 bar 3-4 = 7 bar ventilation Steam food oil air & pressure & petrol & water Steel Special suction gas & welding Offshore cargo D 059004-12 3/4 059004-16 1 059004-20 1 1/4 059004-24 1 1/2 059004-32 2 059004-48 3 059004-64 4 059004-80 5 059004-96 6 DP 059008-12 3/4 059008-16 1 059008-20 1 1/4 059008-24 1 1/2 059008-32 2 059008-48 3 059008-64 4 059008-80 5 059008-96 6 Couplings, clamps & pneumatics valves & flanges technical info 97
Cam Lock Couplings, Stainless Steel AISI 316 Application: Low pressure quick disconnect couplings, suitable for oils, petrol, chemicals, water etc. Material: Aluminium and stainless steel AISI 316* Thread types: BSP and NPT AISI 316, BSP Work pressure: 3/4-2 = 17 bar 2 1/2 = 10 bar 3-4 = 7 bar A 059111-12 3/4 059111-16 1 059111-20 1 1/4 059111-24 1 1/2 059111-32 2 059111-48 3 059111-64 4 059111-80 5 059111-96 6 E 059555-12 3/4 059555-16 1 059555-20 1 1/4 059555-24 1 1/2 059555-32 2 059555-48 3 059555-64 4 059555-80 5 059555-96 6 B 059222-12 3/4 059222-16 1 059222-20 1 1/4 059222-24 1 1/2 059222-32 2 059222-48 3 059222-64 4 059222-80 5 059222-96 6 F 059666-12 3/4 059666-16 1 059666-20 1 1/4 059666-24 1 1/2 059666-32 2 059666-48 3 059666-64 4 059666-80 5 059666-96 6 C 059333-12 3/4 059333-16 1 059333-20 1 1/4 059333-24 1 1/2 059333-32 2 059333-48 3 059333-64 4 059333-80 5 059333-96 6 DC 059777-12 3/4 059777-16 1 059777-20 1 1/4 059777-24 1 1/2 059777-32 2 059777-48 3 059777-64 4 059777-80 5 059777-96 6 D 059444-12 3/4 059444-16 1 059444-20 1 1/4 059444-24 1 1/2 059444-32 2 059444-48 3 059444-64 4 059444-80 5 059444-96 6 DP 059888-12 3/4 059888-16 1 059888-20 1 1/4 059888-24 1 1/2 059888-32 2 059888-48 3 059888-64 4 059888-80 5 059888-96 6 98
intro A 059011-12 3/4 059011-16 1 059011-20 1 1/4 059011-24 1 1/2 059011-32 2 059011-48 3 059011-64 4 059011-80 5 059011-96 6 B 059022-12 3/4 059022-16 1 059022-20 1 1/4 059022-24 1 1/2 059022-32 2 059022-48 3 059022-64 4 059022-80 5 059022-96 6 C 059333-12 3/4 059333-16 1 059333-20 1 1/4 059333-24 1 1/2 059333-32 2 059333-48 3 059333-64 4 059333-80 5 059333-96 6 Cam Lock Couplings, Stainless Steel AISI 316 Application: Low pressure quick disconnect couplings, suitable for oils, petrol, chemicals, water etc. Material: Aluminium and stainless steel AISI 316* Thread types: BSP and NPT AISI 316, NPT E 059555-12 3/4 059555-16 1 059555-20 1 1/4 059555-24 1 1/2 059555-32 2 059555-48 3 059555-64 4 059555-80 5 059555-96 6 F 059066-12 3/4 059066-16 1 059066-20 1 1/4 059066-24 1 1/2 059066-32 2 059066-48 3 059066-64 4 059066-80 5 059066-96 6 DC 059777-12 3/4 059777-16 1 059777-20 1 1/4 059777-24 1 1/2 059777-32 2 059777-48 3 059777-64 4 059777-80 5 059777-96 6 Work pressure: 3/4-2 = 17 bar 2 1/2 = 10 bar 3-4 = 7 bar ventilation Steam food oil air & pressure & petrol & water Steel Special suction gas & welding Offshore cargo D 059044-12 3/4 059044-16 1 059044-20 1 1/4 059044-24 1 1/2 059044-32 2 059044-48 3 059044-64 4 059044-80 5 059044-96 6 DP 059888-12 3/4 059888-16 1 059888-20 1 1/4 059888-24 1 1/2 059888-32 2 059888-48 3 059888-64 4 059888-80 5 059888-96 6 Couplings, clamps & pneumatics valves & flanges technical info 99
KC HOSE NIPPLES Application: KC nipples are employed both with hose clamps and crimping ferrule. Materials: Carbon steel and stainless steel AISI 316 Thread types: BSPT and NPT KC nipples with BSPT Threds Part.no. stainless Part.no. steel For hose BSP 052011-08 052001-08 1/2 1/2 052011-12 052001-12 3/4 3/4 052011-16 052001-16 1 1 052011-20 052001-20 1 1/4 1 1/4 052011-24 052001-24 1 1/2 1 1/2 052011-32 052001-32 2 2 052011-40 052001-40 2 1/2 2 1/2 052011-48 052001-48 3 3 052011-64 052001-64 4 4 052011-96 052001-96 6 6 KC nipples with NPT Threds Part.no. stainless Part.no. steel For hose NPT 052012-08 052002-08 1/2 1/2 052012-12 052002-12 3/4 3/4 052012-16 052002-16 1 1 052012-20 052002-20 1 1/4 1 1/4 052012-24 052002-24 1 1/2 1 1/2 052012-32 052002-32 2 2 052012-40 052002-40 2 1/2 2 1/2 052012-48 052002-48 3 3 052012-64 052002-64 4 4 052012-96 052002-96 6 6 KC nipples with weld end Part.no. stainless Part.no. steel For hose BSP 052013-08 052003-08 1/2-052013-12 052003-12 3/4-052013-16 052003-16 1-052013-20 052003-20 1 1/4-052013-24 052003-24 1 1/2-052013-32 052003-32 2-052013-40 052003-40 2 1/2-052013-48 052003-48 3-052013-64 052003-64 4-100
technical info ventilation Steam food oil air & pressure & petrol & water gas & welding Offshore cargo intro HOSE MENDER Carbon Steel Part.no. For hose 052004-06 3/8 052004-08 1/2 052004-12 3/4 052004-16 1 052004-20 1 1/4 052004-24 1 1/2 052004-32 2 Couplings, clamps & pneumatics 052004-48 3 valves & flanges 052004-64 4 052004-96 6 Other dimensions may be delivered upon request. GL-SERIE ONE PIECE-COUPLINGS Couplings custom-made for ACR MegaTech and MegaVac The couplings are delivered in carbon steel. Stainless steel AISI 316 available upon request. SAE 3000 psi with O-ring Steel Special suction GL 343 GL 344 GL 345 Part. nr Connection Hose dim. Price/NOK, carbon steel 32-32 2" 2" x x x 40-40 2 1/2" 2 1/2" 2295,- 2133,- 2346,- 48-40 3" 3" 2501,- 3116,- x 56-56 3 1/2" 3 1/2" x x x 64-64 4" 4" 4194,- 5773,- x x = Price upon request. 101
BRASS COUPLINGS Application: Used in the industry, shipyards, boats and pneumatic applications. Hose clamps are recommended during the mounting process. Other types and dimensions available upon request. HOSE JOINT Part.no. Hose dimension Connection 056001-04 1/4 1/4 056001-06 3/8 3/4 056001-08 1/2 1/2 056001-12 3/4 3/4 056001-16 1 1 HOSE FITTING, Female BSP Part.no. Hose dimension Connection 056002-04 1/4 1/4 056002-06 3/8 3/8 056002-08 1/2 1/2 056002-10 5/8 5/8 056002-12 3/4 3/4 056002-16 1 1 PLUG BSP Part.no. Hose dimension Connection 056006-04 1/4-6.k hode - 056006-06 3/8-6.k hode - 056006-08 1/2-6.k hode - 056006-12 3/4-6.k hode - 056000-16 1-6.k hode - 102
ventilation Steam food oil air & pressure & petrol & water gas & welding technical info intro HOSE FITTING, Male BSP Part.no. Hose dimension Connection 056003-04 1/4 1/4 056003-04-02 1/4 1/8 056003-04-06 1/4 3/8 056003-04-08 1/4 1/2 056003-06 3/8 3/8 056003-06-04 3/8 1/4 056003-06-08 3/8 1/2 056003-08 1/2 1/2 056003-08-04 1/2 1/4 056003-08-06 1/2 3/8 056003-08-12 1/2 3/4 056003-12 3/4 34 056003-12-08 3/4 1/2 056003-12-16 3/4 1 056003-16 1 1 056003-16-12 1 3/4 056003-16-20 1 1 1/4 056003-20 1 1/4 1 1/4 056003-20-16 1 1/4 1 056003-20-24 1 1/4 1 1/2 056003-24 1 1/2 1 1/2 056003-24-20 1 1/2 1 1/4 056003-32-24 2 1 1/2 056003-32-32 2 2 ADAPTOR, BSP Female/Male Part.no. Hose dimension Connection 056007-04-02 1/4" 1/8 056007-06-04 3/8 1/4 056007-08-04 1/2 1/4 056007-08-06 1/2 3/8 056007-12-04 3/4 1/4 056007-12-06 3/4 3/8 056007-12-08 3/8 1/2 056007-16-06 1" 3/8 056007-16-08 1 1/2 056007-16-12 1 3/4 056007-20-12 1 1/4" 3/4 056007-20-16 1 1/4" 1 056007-24-12 1 1/2 3/4 056007-24-16 1 1/2" 1 Offshore cargo Couplings, clamps & pneumatics 056007-32-20 2" 1 1/4 valves & flanges 056007-32-24 2" 1 1/2 Steel Special suction 103
HEXAGON NIPPLE, BSP Part.no. Hose dimension Connection 056008-02 1/8 1/8 056008-04 1/4 1/4 056008-06 3/8 3/8 056008-08 1/2 1/2 056008-12 3/4 3/4 056008-16 1 1 056008-20 1 1/4 1 1/4 056008-24 1 1/2 1 1/2 056008-32 2 2 ADAPTOR, BSP Part.no. Hose dimension Connection 056009-04-02 1/4 1/8 056009-06-02 3/8 1/8 056009-06-04 3/8 1/4 056009-08-04 1/2 1/4 056009-08-06 1/2 3/8 056009-12-04 3/4 1/4 056009-12-06 3/4 3/8 056009-12-08 3/4 1/2 056009-16-06 1 3/8 056009-16-08 1 1/2 056009-16-12 1 3/4 056009-20-12 1 1/4 3/4 056009-20-16 1 1/4 1 056009-24-16 1 1/2 1 056009-24-20 1 1/2 1 1/4 056009-32-20 2 1 1/4 056009-32-24 2 1 1/2 ELBOW FEMALE/FEMALE BSP Part.no. Hose dimension Connection 056110-02 1/8 1/8 056110-04 1/4 1/4 056110-06 3/8 3/8 056110-08 1/2 1/2 056110-12 3/4 3/4 056110-16 1 1 056110-20 1 1/4 1 1/4 056110-24 1 1/2 1 1/2 056110-32 2 2 104
ventilation Steam food oil air & pressure & petrol & water gas & welding Offshore cargo technical info Couplings, clamps & pneumatics valves & flanges intro REDUCER, FEMALE/MALE BSP Part.no. Hose dimension Connection 056014-02 1/8 1/8 056014-04 1/4 1/4 056014-04-02 1/4 1/4 056014-06 3/8 3/8 056014-06-02 3/8 3/8 056014-06-04 3/8 3/8 056014-08 1/2 1/2 056014-08-04 1/2 1/2 056014-08-06 1/2 1/2 056014-12 3/4 3/4 056014-12-06 3/4 3/4 056014-12-08 3/4 3/4 056014-16 1 1 056014-16-08 1 1 05601416-12 1 1 056014-20 1 1/4 1 1/4 056014-20-12 1 1/4 1 1/4 056014-20-16 1 1/4 1 1/4 056014-24 1 1/2 1 1/2 056014-24-12 1 1/2 1 1/2 056014-24-16 1 1/2 1 1/2 056014-24-20 1 1/2 1 1/2 056014-32 2 2 056014-32-16 2 2 056014-32-20 2 2 056014-32-24 2 2 ELBOW, MALE/FEMALE BSP Part.no. Hose dimension Connection 056111-02 1/8 1/8 056111-04 1/4 1/4 056111-06 3/8 3/8 056111-08 1/2 1/2 056111-12 3/4 3/4 056111-16 1 1 056111-20 1 1/4 1 1/4 056111-24 1 1/2 1 1/2 056111-32 2 2 Steel Special suction 105
TEE, BSP Part.no. Hose dimension Connection 056512-02 n/a 1/8 056512-04 n/a 1/4 056512-06 n/a 3/8" 056512-08 n/a 1/2 056512-12 n/a 3/4 056512-16 n/a 1 056512-20 n/a 1 1/4 056512-24 n/a 1 1/2 056512-32 n/a 2 SOCKET, BSP Part.no. Hose dimension Connection 056213-02 n/a 1/8 056213-04 n/a 1/4 056213-06 n/a 3/8 056213-08 n/a 1/2 056213-12 n/a 3/4 056213-16 n/a 1 056213-20 n/a 1 1/4 056213-24 n/a 1 1/2 056213-32 n/a 2 056213-08-04 n/a 1/4 056213-08-06 n/a 3/8 056213-12-08 n/a 1/2 056213-16-08 n/a 1/2 HOSE ELBOW 90, MALE BSP Part.no. Hose dimension Connection 056004-08 1/2 1/2 056004-12 3/4 3/4 056004-16 1 1 106
technical info ventilation Steam food oil air & pressure & petrol & water valves & flanges Couplings, clamps & pneumatics Offshore cargo intro CRIMPING FERRULE Crimping ferrules made of steel pipes for WP up to 15 bar, depending on the dimension. Often used with KC nipples on oil-, water- and air hoses. CRIMPING FERRULE STEEL Part.no. Inner mm Outer mm Length mm Hose dim. 059321-045 45,8 51 40 1 1/4 059321-054 54,4 60,3 45 1 1/2 059321-064 64,2 70 55 1 1/2-1 3/4 059321-070 70,3 76,1 55 2 059321-076 76,1 85,2 55 2-2 1/4 059321-094 94,4 101,6 70 3 059321-100 100,8 108 70 3 059321-125 125 133 90 4 CRIMPING FERRULE, STAINLESS STEEL Part.no. Inner mm Outer mm Length mm Hose dim. 059422-0510 51 55 40 1 1/4 059422-0603 60,3 67,5 55 1 1/2 059422-0690 69 73 55 2 059422-0761 76,1 82,1 55 2-2 1/4 059422-0889 88,9 95 65 3 gas & welding 59422-1250 125 133 90 4 Steel Special suction 107
CRIMPING FERRULE / STAINLESS STEEL FOR TEXTILE HOSES Crimping ferrule intended for use in connection with textile hoses, in combination with hydraulic couplings. Part.no. Hose dim.mm Hose dim. inches 059423-08 13 1/2 059423-10 16 5/8 059423-12 19 3/4 059423-16 25 1 059423-20 32 1 1/4 059423-24 38 1 1/2 059423-32 51 2 LOW PRESSURE FERRULE / A-304 Tuboflex Fuel ferrules, for use in connection with fuel hoses, for compressed air and water hoses. Part.no. Inner mm Outer mm Length mm 059424-04 18 20 15 059424-06 20,5 23 15 059424-08 22 25 15 059424-10 - - - 059424-12 30 33 16 059424-16 36 38 25 CRIMPING FERRULE FOR TEXTILE HOSES C6F STEEL Crimping ferrules intended for use in connection with textile hoses, in combination with hydraulic couplings. Part.no. Outer hose dim. 059425-04 24 mm 059425-06 31 mm 059425-08 25 mm 059425-12 32 mm 059425-16 38 mm 059425-20 42 mm 059425-24 48 mm 059425-32 60 mm 108
ventilation Steam food oil air & pressure & petrol & water technical info intro LAUX COUPLINGS Hose coupling, model 42* APPLICATION: Hoses for septic, grain, cement and watering Materials: Galvanized steel GASKET: EPDM standard WP: 10 bar Thread type: BSP Quick disconnect coupling with lock on female part Not interchangeable with model C Hose clamps are recommended during the mounting process Part no KMS Dimension For hose 053001-32 2 053001-48 3 053001-64 4 KMG Male thread dim 053002-32 2 053002-48 3 053002-64 4 KVS For hose 053003-32 2 053003-48 3 053003-64 4 gas & welding Offshore cargo Couplings, clamps & pneumatics valves & flanges KVG Male thread dim. 053004-32 2 053004-48 3 053004-64 4 Steel Special suction Package EPDM Dimension 053000-32 2 053000-48 3 053000-64 4 *Other types and dimensions available upon request 109
claw couplings American Thread: NPT Material: Galvanized steel WP: Max 12 bar Delivered with safety clips. With hose tail Part.no. Hose dia mm. 054001-06 10 054001-08 13 054001-12 19 054001-16 25 054001-20 32 Large claw 054001-24 35 Large claw 054001-32 51 Large claw Male thread Part.no. Hose dia mm. 054002-06 10 054002-08 13 054002-12 19 054002-16 25 Female thread Part.no. Hose dia mm. 054003-06 10 054003-08 13 054003-12 19 054003-16 25 054003-24 32 Large claw 054003-32 38 Large claw Safety clips and gasket* Part.no. Hose dia mm. 054000-0 Safety clips 054001-0 Neoprene gasket 054002-0 Black natural rubber gasket * Available in stainless steel and brass upon request 110
technical info intro CLAW COUPLINGS European standard DIN 3489 Threads: BSP Small/2 claws dia 42 mm Material: Steel With hose tail Part.no. Hose dia mm. Price/NOK 054101-06 10 x 054101-08 13 67,- 054101-12 19 55,- 054101-16 25 81,- Male thread Part.no. Hose dia mm. Price/NOK 054102-06 10 81,- 054102-08 13 77,- 054102-12 19 71,- 054102-16 25 82,- Female thread x = Price upon request Part.no. Hose dia mm. Price/NOK 054301-06 10 73,- 054301-08 13 76,- 054301-12 19 60,- ventilation Steam food oil air & pressure & petrol & water 054301-16 25 71,- gas & welding Offshore cargo Couplings, clamps & pneumatics valves & flanges Steel Special suction Safety clips and gasket Part.no. Hose dia mm. Price/NOK 054000-0 Safety clips 2,- 054000-1 Oil resistant gasket 8,- 111
Tank wagon couplings, type TW Standard DIN 28450 APPLICATION: Petrol, oil, diesel, chemicals etc. Materials: Brass/Stainless steel AISI 316 Thread: BSP Trykk: Max 16 bar Interchangeable with Elaflex, Gossler etc. Part.no. Dimension VK/brass, male 059411-32 2 059411-48 3 059411-64 4 059414-32 2 059414-48 3 059414-64 4 VK/stainless steel, male 059413-32 2 059413-48 3 059413-64 4 MK/stainless steel, female 059415-32 2 059415-48 3 059415-64 4 MB/aluminium cover 059416-32 2 059416-48 3 059416-64 4 112
intro GS-HYDRO SWIVELS 8" ANSI 3000 psi 3" API, 15000 psi, for hub Design and fabrication of high quality swivels, custom-made for a broad variety of applications, liquids and bulk, from hydrocarbons, steam, powder and cement to food articles (e.g. milk). The swivles are available in carbon steel and various non-corrosive and stainless steel types. The swivels have multi-race ball bearing and a very reliable gasket system, adjusted to the relevant liquid/bulk and pressure. The swivels are available with flanges (API, DIN og ANSI), GS-flange system, threads or custom-made end connections. ANSI CLASS (#) API RATING (psi) HIGH PRESSURE 150 300 600 900 1500 2500 3000 2.5k 5k 10k 15k 1000 bar 1500 bar 1/2 x x 3/4 1 x x 2 x x x x x x x x x x x x 3 x x x x x x x x x x x x 4 x x x x x x x x x x x x 5 x x x x x x x x x x x 6 x x x x x x x x x 8 x x x x x x x x x 10 x x x 12 x x Materials: Carbon steel: A333 gr 3 and 6; A350 LF2; 4130 Non-corrosive steel: S165M, 17-4PH Stainless steel: AISI 316, 6MO, UNS, S31254 Other dimensions and pressure rating available upon request x x ventilation Steam food oil air & pressure & petrol & water Steel Special suction gas & welding Offshore cargo Couplings, clamps & pneumatics valves & flanges technical info 113
GS-Hydro offers a complete selection of pneumatic fittings 114
technical info ventilation Steam food oil air & pressure & petrol & water Offshore cargo valves & flanges Couplings, clamps & pneumatics intro O-Ring in NBR material (silicone free). O-Ring in NBR material (silicone free). O-Ring seal. Relase ring in synthetic material. PUSH-IN FITTINGS New design non-corr. clamping ring. Permanent sealing guaranteed. New design non-corr. clamp ring. Permanent sealing guaranteed. Threads from M5 to G 1/2. gas & welding Steel Special suction Inner hexagon for facilitating mounting in areas of limited space. 115
TECHNICAL INFORMATION Pneumatic fittings TOLERANCE Polyurethane (PU) tubes AREA DATA W. Temperature: - 20 C til + 70 C W. Pressure: Max 16 bar at 20 C Medium: Air Vacuum: Max 98% Materials: Threads: Nickel covered brass Silicone free NBR gasket AISI 316 stainless steel clamping ring, black support ring. BSP with O-ring OUTSIDE DIA OUTSIDE TOLERANCE 4-8 mm + 0,10 mm to - 0,1 mm 10-14 mm + 0,15 mm to - 0,1 mm 116
ventilation Steam food oil air & pressure & petrol & water Offshore cargo Couplings, clamps & pneumatics valves & flanges gas & welding technical info intro UNION, MALE Part no. D mm G C B H L Key O Pack. 200101 4 M5 2,6 9,0 4,0 20,5 9,0 2,5 50 200122 4 M6 2,6 9,0 5,0 20,5 9,0 2,5 50 200121 4 M7 2,5 10,8 6,0 22,2 9,0 2,5 50 200102 4 G1/8 2,6 13,5 6,0 20,0 9,0 2,5 50 200103 4 G1/4 2,6 17,0 8,0 21,0 9,0 2,5 50 200104 5 M5 2,6 9,5 4,0 22,0 9,5 2,5 50 200105 5 G1/8 4,2 13,5 6,0 22,0 10,0 4,0 50 200106 5 G1/4 4,2 17,0 8,0 22,0 10,0 4,0 50 200100 6 M5 2,6 10,5 4,0 22,5 10,5 2,5 50 200120 6 M7 3,5 10,5 6,0 22,0 10,5 3,5 50 200107 6 G1/8 4,2 13,5 6,0 24,0 11,0 4,0 50 200108 6 G1/4 5,0 17,0 8,0 24,0 11,0 4,0 50 200118 6 G3/8 4,2 20,0 9,0 24,0 13,0 4,0 50 200109 8 G1/8 5,0 13,0 6,0 26,5 13,0 5,0 50 200110 8 G1/4 6,2 17,0 8,0 25,0 13,0 6,0 50 200111 8 G3/8 6,2 20,0 9,0 25,0 13,0 6,0 50 200112 10 G1/4 7,3 16,0 8,0 29,5 16,0 7,0 50 200113 10 G3/8 8,3 21,0 9,0 29,5 16,0 8,0 50 200119 12 G1/4 7,3 16,0 8,0 31,5 18,0 7,0 50 200114 12 G3/8 10,3 21,0 9,0 31,0 18,0 10,0 25 200115 12 G1/2 10,3 24,0 11,0 31,0 18,0 10,0 25 200116 14 G3/8 10,3 21,0 9,0 34,0 21,0 10,0 25 200117 14 G1/2 12,0 25,0 11,0 34,0 21,0 12,0 25 UNION, FEMALE Part no. D mm G C B H L Key Pack. 200201 4 G 1/8 3,0 11,0 6,0 26,5 9,0 50 200202 4 G 1/4 3,0 16,0 10,0 29,5 9,0 50 200203 5 G 1/8 4,0 12,8 6,0 27,0 10,0 50 200204 5 G 1/4 4,0 16,0 10,0 30,0 10,0 50 200205 6 G 1/8 5,0 11,0 6,0 27,0 11,0 50 200206 6 G 1/4 5,0 16,0 10,0 31,0 11,0 50 200207 8 G 1/8 7,0 11,0 6,0 28,0 13,0 50 200208 8 G 1/4 7,0 16,0 10,0 32,0 13,0 50 200209 10 G 1/4 9,0 16,0 10,0 32,0 16,0 50 200210 10 G 3/8 9,0 20,0 13,0 38,0 20,0 50 Steel Special suction 117
STRAIGHT CONNECTOR Part no. D1 mm D2 C B L Pack. 200301 4 4 3,0 10,0 32,0 50 200302 5 5 4,0 11,0 33,0 50 200308 6 4 3,0 11,0 33,5 50 200303 6 6 5,0 14,0 33,5 50 200309 8 6 5,0 13,0 37,0 50 200304 8 8 7,0 16,0 37,0 50 200310 10 8 7,0 16,0 39,5 50 200305 10 10 9,0 17,0 39,5 50 200306 12 12 11,0 20,0 42,0 50 200307 14 14 12,0 22,0 45,0 50 ELBOW Part no. D mm C B L Pack. 200401 4 3,0 9,0 17,5 50 200402 5 4,0 9,5 19,0 50 200403 6 5,0 11,0 19,5 50 200404 8 7,0 13,0 23,0 50 200405 10 8,0 15,0 25,0 50 200406 12 10,0 17,0 27,0 25 200407 14 12,0 20,0 30,0 25 TEE Part no. D1 mm D2 C B L Pack. 200501 4 4 3,0 9,0 17,5 50 200502 5 5 4,0 9,5 19,0 50 200503 6 6 5,0 11,0 19,5 50 200508 6 4 3,0 11,0 23,0 50 200504 8 8 7,0 13,0 23,0 50 200509 8 6 5,0 13,0 25,0 50 200505 10 10 8,0 15,0 25,0 20 200510 10 8 7,0 15,0 25,0 20 200506 12 12 10,0 17,0 27,0 20 200507 14 14 12,0 20,0 30,0 20 118
ventilation Steam food oil air & pressure & petrol & water gas & welding Offshore cargo valves & flanges Couplings, clamps & pneumatics technical info intro NIPPLE Part no. D mm G C B H L A Key Pack. 200601 4 M5 2,0 8,0 4,0 24,5 2,0 8,0 50 200621 4 M7 2,0-6,0 26,0 4,0 10,0 50 200602 4 G1/8 2,0 13,0 6,0 27,7 6,0 13,0 50 200603 4 G1/4 2,0 16,0 8,0 30,2 7,5 13,0 50 200604 5 M5 2,6 8,0 4,0 25,0 2,6 8,0 50 200605 5 G1/8 3,0 13,0 6,0 28,0 5,5 13,0 50 200606 5 G1/4 3,0 16,0 8,0 31,0 7,5 13,0 50 200600 6 M5 2,6 8,0 4,0 26,0 2,6 8,0 50 200622 6 M7 4,0-6,0 28,0 4,0 10,0 50 200607 6 G1/8 4,0 13,0 6,0 29,5 6,0 13,0 50 200608 6 G1/4 4,0 16,0 8,0 32,0 7,5 13,0 50 200609 8 G1/8 6,0 13,0 6,0 31,0 6,0 13,0 50 200610 8 G1/4 6,0 16,0 8,0 33,5 7,5 13,0 50 200611 8 G3/8 6,0 20,0 9,0 35,5 9,0 13,0 50 200618 10 G1/8 8,0-6,0 32,0 5,5 13,0 50 200612 10 G1/4 8,0 17,0 8,0 38,0 8,0 13,0 50 200613 10 G3/8 8,0 20,0 9,0 41,0 8,0 13,0 50 200620 12 G1/4 10,0 16,0 8,0 39,0 10,0 13,0 50 200614 12 G3/8 10,0 20,0 9,0 42,0 11,0 13,0 25 200615 12 G1/2 10,0 24,0 11,0 44,0 13,0 16,0 25 200617 14 G1/2 12,0 24,0 11,0 46,0 13,0 16,0 25 LONG NIPPLE Part no. D mm G C B H L Key Pack. 206103 4 M7 2,0-6,0 38,0 10,0 50 206102 4 G1/8 2,0 15,0 6,0 39,8 13,0 50 206104 6 M7 4,0-6,0 42,0 10,0 50 206107 6 G1/8 4,0 13,0 6,0 42,2 13,0 50 206108 6 G1/4 4,0 18,0 8,0 47,2 14,0 50 206109 8 G1/8 6,0 15,0 6,0 46,7 13,0 50 206110 8 G1/4 6,0 18,0 8,0 49,7 14,0 50 206112 10 G1/4 8,0 18,0 6,0 55,5 14,0 50 Steel Special suction 119
HOSE MENDER Part no. D mm C L Pack. 200701 4 2,0 32,0 100 200702 5 3,0 33,0 50 200703 6 4,0 35,0 50 200704 8 6,0 38,0 50 200705 10 8,0 45,5 50 200706 12 10,0 48,0 25 200707 14 12,0 52,0 20 REDUCER NIPPLE Part no. D1 mm D2 C B L Pack. 200801 5 4 3,0 9,0 32,5 50 200802 6 4 3,0 9,0 28,5 50 200803 6 5 4,0 9,5 35,5 50 200804 8 4 3,0 9,0 31,0 50 200805 8 5 4,0 9,5 32,5 50 200806 8 6 5,0 10,5 33,5 50 200807 10 6 5,0 10,5 36,5 50 200808 10 8 7,0 13,0 38,0 50 200809 12 4 3,0 13,0 39,5 25 200810 12 6 5,0 13,0 39,5 25 200811 12 8 7,0 13,0 38,5 25 200817 12 10 9,0 15,0 41,0 25 200812 14 4 3,0 15,0 43,0 25 200813 14 6 5,0 15,0 43,0 25 200814 14 8 7,0 15,0 43,0 25 200815 14 10 9,0 15,0 43,0 25 200816 14 12 11,0 17,0 43,0 25 120
technical info ventilation Steam food oil air & pressure & petrol & water gas & welding valves & flanges Couplings, clamps & pneumatics Offshore cargo intro PLUG Part no. D mm C L Pack. 201001 4 5,0 25,5 50 201002 5 6,0 26,5 50 201003 6 7,0 27,5 50 201004 8 9,0 30,5 50 201005 10 11,0 35,0 50 201006 12 13,0 37,0 25 201007 14 15,0 40,0 25 BULK HEAD Part no. D C M I max L Key Pack. 201101 4 3,0 M10 x 1 8 32,0 13 50 201102 5 4,0 M11 x 1 8 33,0 14 50 201103 6 5,0 M14 x 1 8 33,5 17 50 201104 8 7,0 M16 x 1 10 37,0 18 50 201105 10 9,0 M17 x 1 12 39,5 20 50 201106 12 11,0 M20 x 1 17 42,0 24 25 201107 14 12,0 M22 x 1 18 45,0 25 25 Steel Special suction 121
SIMPLE BANJO, 360 Rotates under pressure Part no. D1 G A H L1 L O Pack. 201401 4 M5 2,0 4 17,0 18,5 2 50 201402 4 G1/8 5,5 6 25,0 21,0 3 50 201403 5 M5 2,0 4 17,0 19,5 2 50 201404 5 G1/8 5,5 6 25,0 22,5 3 50 201405 6 G1/8 5,5 6 25,0 23,5 3 50 201406 8 G1/8 5,5 6 25,0 24,5 3 50 201407 6 G1/4 7,8 8 29,3 24,5 4 50 201408 8 G1/4 7,8 8 29,3 26,0 4 50 201409 10 G1/4 7,8 8 29,3 27,0 4 25 201410 8 G3/8 10,0 9 34,0 29,0 5 25 201411 10 G3/8 10,0 9 34,0 29,0 5 25 201414 12 G1/4 7,8 8 29,3 28,0 4 25 201412 12 G3/8 10,0 9 34,0 29,0 5 25 DOUBLE BANJO, 360 Rotates under pressure Part no. D1 G A H L1 L O Pack. 201501 4 M5 2,0 4 17,0 18,5 2 50 201502 4 G1/8 5,5 6 25,0 21,0 3 50 201503 5 M5 2,0 4 17,0 19,5 2 50 201504 5 G1/8 5,5 6 25,0 22,5 3 50 201505 6 G1/8 5,5 6 25,0 23,5 3 50 201506 8 G1/8 5,5 6 25,0 24,0 3 50 201507 6 G1/4 7,8 8 29,3 24,0 4 50 201508 8 G1/4 7,8 8 29,3 26,0 4 50 201509 10 G1/4 7,8 8 29,3 27,0 4 25 201510 8 G3/8 10,0 9 34,0 28,0 5 25 201511 10 G3/8 10,0 9 34,0 29,0 5 25 201512 12 G3/8 10,0 9 34,0 30,0 5 25 122
ventilation Steam food oil air & pressure & petrol & water Offshore cargo valves & flanges Couplings, clamps & pneumatics gas & welding technical info intro UNION WITH CONTRA NUT Part no. D1 G B H L1 L Key1 Key2 Pack. 202502 4 G1/8 M10 x 1 9,5 16 30 14 17 100 202504 6 G1/8 M14 x 1 9,5 16 31 17 17 100 202505 6 G1/4 M14 x 1 13,5 16 35 17 17 50 202506 8 G1/8 M16 x 1 9,5 16 36 19 17 50 TEE W/SWIVEL Part no. D G B H L L1 Key Pack. 202000 4 M5 8,0 4,0 17,5 20,0 8 100 202001 4 G1/8 12,8 5,8 17,5 18,5 13 100 202002 4 G1/4 12,8 8,0 19,0 22,5 16 100 202003 6 G1/8 12,8 5,8 19,5 18,5 13 100 202004 6 G1/4 15,8 8,0 21,0 22,5 16 100 202005 8 G1/8 12,8 5,8 23,0 20,5 13 100 202006 8 G1/4 15,8 8,0 23,0 22,5 16 100 202007 8 G3/8 17,8 9,0 25,5 25,5 18 50 202008 10 G1/4 15,8 8,0 25,5 24,5 16 50 202009 10 G3/8 17,8 9,0 25,5 25,5 18 50 202010 12 G1/4 15,8 8,0 27,0 24,5 16 50 202011 12 G3/8 20,0 9,0 27,0 26,5 18 25 202012 14 G1/2 25,0 11,0 31,0 30,0 21 25 Steel Special suction 123
ELBOW W/SWIVEL Part no. D G B H L Key Pack. 202200 4 M5 8,0 4,0 17,5 8 100 202216 4 M7 10,5 6,0 21,5 11 100 202201 4 G1/8 12,8 5,8 17,5 13 100 202202 4 G1/4 12,8 8,0 19,0 16 100 202215 6 M5 8,0 4,0 18,5 8 100 202217 6 M7 10,5 6,0 21,5 11 100 202203 6 G1/8 12,8 5,8 19,5 13 100 202204 6 G1/4 15,8 8,0 21,0 16 100 202205 8 G1/8 12,8 5,8 23,0 13 100 202206 8 G1/4 15,8 8,0 23,0 16 100 202207 8 G3/8 17,8 9,0 25,5 18 50 202208 10 G1/4 15,8 8,0 25,5 16 50 202209 10 G3/8 17,8 9,0 25,5 18 50 202210 12 G1/4 15,8 8,0 27,0 16 50 202211 12 G3/8 20,0 9,0 27,0 18 25 202212 12 G1/2 25,0 11,0 27,0 21 25 202213 14 G3/8 20,0 9,0 31,0 18 25 202214 14 G1/2 25,0 11,0 31,0 21 25 MOUNTING TOOL Art nr. D1 D2 L Pack. 201701 8 14,0 93 10 124
technical info valves & flanges intro SILENCER Part no. A D C DM Key Pack. 303052 G 1/8 7,0 6 29 13 50 303053 G 1/4 9,0 8 32 16 50 303054 G 3/8 13,0 9 43 19 50 303055 G 1/2 16,0 11 53 24 50 303056 G 3/4 29,0 13 53 30 50 303057 G 1 25,0 15 66 36 50 303058 M 5 5,0 4 22 8 100 303059 G 1/8 7,0 6 29 13 50 ventilation Steam food oil air & pressure & petrol & water Offshore cargo Couplings, clamps & pneumatics MANOMETER gas & welding Part no. A D BAR Pack. 301015 G 1/8 40 0-10 1 301065 G 1/4 50 0-10 1 MANOMETER Part no. A D BAR Pack. 301440 G 1/8 40 0-10 1 Steel Special suction MANOMETER Part no. A D BAR Pack. 301140 G 1/4 63 0-10 1 125
TEFLONE TUBE Part. no Outside dia. I.D. W.P. bar Std.length 426009 4 2 18 50 426011 6 4 12 50 426013 8 6 8 50 426015 10 8 6 50 TECHNICAL INFORMATION: COVER: TUBE: TEMPERATURE: APPLICATION: White teflon White teflon -190 C to +260 C Pneumatic systems, instrumentation, chemicals POLYURETHANE TUBE Part. no Outside dia. I.D. W.P. bar Std.length 422109 4 2,5 12 50 422111 6 4,0 13 50 422113 8 6,0 12 50 422116 10 8,0 8 50 422120 12 9,0 10 50 TECHNICAL INFORMATION: COVER: Polyurethane, blue TUBE: Polyurethane TEMPERATURE: -40 C to +90 C TOLERANCES: OD 4mm to 8mm = +/- 0,10mm ID = +/- 0,20mm OD 10mm to 22mm = +/- 0,15mm ID = +/- 0,30mm APPLICATION: Industry, laboratories, instrumentation, pneumatic systems 126
technical info ventilation Steam food oil air & pressure & petrol & water valves & flanges Couplings, clamps & pneumatics Offshore cargo intro GS-Hydro supplies hose reels for a wide variety of gas & welding applications, both high and low pressure. Steel Special suction 127
Automatic Hose Reel For compressed air Part. no Connection BSP W.P. bar Dia mm Hose Length 170808 1/4 12 8/12 8 3 171006 1/4 12 6,5/10 10 3 171508 1/4 12 8/12 15 6 Weight kilos AutomatiC Hose Reel*, Non-Corrosive Steel For air and water Application: Material: Ideal for butcheries, agriculture, the fishing industry, washing applications etc. Strong, non-corrosive, electro-polished steel Part. no Connection BSP W.P. bar Dia mm Hose Length ES809103 3/8 20 3/8 10 13 Weight kilos *Corresponding hose reels may be delivered for water, oil and greases, W.P. 200 bar. 128
technical info ventilation Steam food oil air & pressure & petrol & water valves & flanges Couplings, clamps & pneumatics Offshore cargo intro Automatic Hose Reel Serie 809 Multi-position system May be mounted onwall-, ceiling or floor Leak-free swivel with full flow Cabinet, maintenance-free spring Flexible hose Max temperature +100 C Small, compact model for industry, agriculture, and car workshops Epoxy powder surface 165 mm solid L-shaped steel holder Bracket, adjustable for 9 different positions. Part. no Connection BSP W.P. bar Dia mm Hose Length E809102 1/4 20 1/4 10 13 E809103 3/8 20 3/8 10 14 E800809 Wall bracket, turnable, 140 2,5 High pressure - for air, water, greases and hydraulic oil EH809082 1/4 345 1/4 8 15 EH809083 3/8 276 3/8 8 16 gas & welding Weight kilos Steel Special suction 129
MANUAL HOSE REELS* Part. no Type Description 055106-04 Reel 301 for up to 60 m 200 bar 1/4 hose Reel 301 for up to 30 m 200 bar 3/8 hose 055107-06 055107-08 Reel 420 for up to 90 m 200 bar 3/8 hose Reel 420 for up to 45 m 200 bar 1/2 hose 055108-06 055108-08 Hose wagon 901 for up to 60 m 20 bar 3/8 hose Hose wagon 901 for up to 30 m 20 bar 1/2 hose 055109-12 055106-16 Golia Baby hose wagon for up to 100 m 3/4 hose Golia Baby hose wagon for up to 100 m 1 hose *Manual hose reels are not regular stock line and will be delievered upon request x = Price upon request 130