S
S KUBOTA KX-121-3 RUBBER TRACKED EXCAVATOR (4.5 TONNE) MODEL KX-121-3 Net power - 30.2 kw Digging Force - 1790 kgf Digging Depth - 3.5 m Safe Working Load - 460 kg Operating Weight - 4,100 kilograms Weight with counterweight, rubber tracks, bucket, operator, full fuel and auxiliary lines. Weight & SWL will vary depending on machine configuration. General purpose bucket Shaker bucket Ripper + points Demolition grabs Hammer E30 Flip screen Rock grinder Rock saw Auger Wet saw $95 / hr $80 / day $80 / day $80 / day $240 / day $360 / day $600 / day $840 / day $170 / day $840 / day ALL HIRE ATTRACTS A MINIMUM 8HRS AT BUCKET RATE, WHILE ADDITIONAL ATTACHMENTS ARE CHARGED PER DAY DAY RATES FOR SPECIALIST ATTACHMENTS APPLY TO AN 8HR DAY, ANY EXTRA OVER USE WILL BE CHARGED AT HOURLY RATE.
S KUBOTA KX-080-3 RUBBER TRACKED EXCAVATOR (8 TONNE) MODEL KX-080-3 Net power - 52.2 kw Digging Force - 3880 kgf Digging Depth - 4.6 m Safe Working Load - 550 kg Operating Weight - 8,330 kilograms Weight with counterweight, rubber tracks, bucket, operator, full fuel and auxiliary lines. Weight & SWL will vary depending on machine configuration General purpose bucket Sieve bucket Ripper + points Demolition grabs Hammer Rock grinder Diamond wet saw $110 / hr $85 / day $85 / day $85 / day $260 / day $660 / day $900 / day ALL HIRE ATTRACTS A MINIMUM 8HRS AT BUCKET RATE, WHILE ADDITIONAL ATTACHMENTS ARE CHARGED PER DAY DAY RATES FOR SPECIALIST ATTACHMENTS APPLY TO AN 8HR DAY, ANY EXTRA OVER USE WILL BE CHARGED AT HOURLY RATE.
S CAT 312DL (14 TONNE) EXCAVATOR (OR EQUIVALENT) Engine Model Cat - C4.2 ACERT Net Power (SAE J1349) - 67 kw Gross Power - 72 kw Digging Force - 39 kn Digging Depth - 5.8 metres Safe Working Load - 1,300 kilograms Operating Weight - 13,470 kilograms Weight with counterweight, steel tracks, bucket, operator, full fuel and auxiliary lines. Weight & SWL will vary depending on machine configuration. General purpose bucket Sieve bucket Ripper + points Demolition grabs Hammer E50 Flip screen Auger Tungsten rock saw $120 / hr $90 / day $90 / day $90 / day $280 / day $420 / day $450 / day $960 / day ALL HIRE ATTRACTS A MINIMUM 8HRS AT BUCKET RATE, WHILE ADDITIONAL ATTACHMENTS ARE CHARGED PER DAY DAY RATES FOR SPECIALIST ATTACHMENTS APPLY TO AN 8HR DAY, ANY EXTRA OVER USE WILL BE CHARGED AT HOURLY RATE.
S CAT 320DL (22 TONNE) EXCAVATOR (OR EQUIVALENT) Engine - Model Cat 3066TA Net Flywheel Power - 103 kw Digging Force - 131 kn Digging Depth - 6.2 metres Safe Working Load - 2,000 kilograms Operating Weight - 21,500 kilograms Weight with counterweight, steel tracks, bucket, operator, full fuel and auxiliary lines. Weight & SWL will vary depending on machine configuration. General purpose bucket Sieve bucket Ripper + points Demolition grabs Hammer Concrete pulveriser EX80 Flip screen Tungsten rock saw $130 / hr $95 / day $95 / day $95 / day $300 / day $300 / day $480 / day $960 / day ALL HIRE ATTRACTS A MINIMUM 8HRS AT BUCKET RATE, WHILE ADDITIONAL ATTACHMENTS ARE CHARGED PER DAY DAY RATES FOR SPECIALIST ATTACHMENTS APPLY TO AN 8HR DAY, ANY EXTRA OVER USE WILL BE CHARGED AT HOURLY RATE.
S CAT 329DL (30 TONNE) EXCAVATOR (OR EQUIVALENT) Engine - Model Cat C7 with ACERT Technology Net Flywheel Power - 152 kw Digging Force - 188 kn Digging Depth - 6.6 metres Safe Working Load - 2,300 kilograms Operating Weight - 29,240 kilograms Weight with counterweight, steel tracks, bucket, operator, full fuel and auxiliary lines. Weight & SWL will vary depending on machine configuration. General purpose bucket Sieve bucket Ripper + points Demolition grabs Hammer Concrete pulveriser EX80 Flip screen Tungsten rock saw Shears $155 / hr $100 / day $100 / day $100 / day $350 / day $350 / day $480 / day $980 / day $1160 / day ALL HIRE ATTRACTS A MINIMUM 8HRS AT BUCKET RATE, WHILE ADDITIONAL ATTACHMENTS ARE CHARGED PER DAY DAY RATES FOR SPECIALIST ATTACHMENTS APPLY TO AN 8HR DAY, ANY EXTRA OVER USE WILL BE CHARGED AT HOURLY RATE.
S KUBOTA SVL 75 TRACK LOADER 4.225 (5 TONNE ) ( OR EQUIVALENT) V3307-DI-TE3, diesel, turbocharged DIMENSIONS Length of track on ground 1446 mm Track gauge 1355 mm Length w/o bucket 2768 mm Length w/bucket on ground 3527 mm Height on top of cab 2083 mm Bucket pin height at max. lift 3027 mm Roll back angle to carry position 27 Reach at max. lift and dump 1038 mm Ground clearance 296 mm Departure angle 31.5 Max. dump angle 41.5 Vehicle width 1675 mm Width with bucket 1727 mm Turning radius from centre-machine rear 2720 mm Bucket (4:1) Pallet Forks Level Best $115 / hr $80 / day $400 / day ALL HIRE ATTRACTS A MINIMUM 8HRS AT BUCKET RATE, WHILE ADDITIONAL ATTACHMENTS ARE CHARGED PER DAY DAY RATES FOR SPECIALIST ATTACHMENTS APPLY TO AN 8HR DAY, ANY EXTRA OVER USE WILL BE CHARGED AT HOURLY RATE.
S CB24 - UTILITY COMPACTOR Cat C1.5 Diesel Engine Operating weight (with ROPS): 2700 kg Gross power (SAEJ1995) at 2800 rpm 24.6 kw/34 hp Net power (ISO 9249) at 2800 rpm 23.7 kw/33 hp Compaction width: 1200 mm CB24 (wet hire) CB24 (dry hire) $65 / hr $275 / day CONDITIONS All consumables during hire period are paid by the hirer Cleaning fee of $50.00 applies when equipment off hired and returned Diesel refuelling fee apply at $2.50 / L Each way Float applies to all dry hire Any damage caused will be charged at cost + 15% to repair
S CS 433E 7T CAT PADFOOT ROLLER Cat 3054C Diesel Engine Operating weight (with ROPS): 6990kg Gross power 75KW/100hp Compaction width: 1676mm CS 433E (wet hire) Smooth drum CS 433E (dry hire) Smooth drum CS 433E (wet hire) Pad foot CS 433E (dry hire) Pad foot $85 / hr $350 / day $90 / hr $400 / day CONDITIONS All consumables during hire period are paid by the hirer Cleaning fee of $50.00 applies when equipment off hired and returned Diesel refuelling fee apply at $2.50 / L Each way Float applies to all dry hire Any damage caused will be charged at cost + 15% to repair
S BARFORD ARTICULATED DUMP TRUCK (10 TONNE) (OR EQUIVALENT) INFORMATION Barford articulated dump truck (6 m 3 or 10 tonne payload) Barford Dump truck (wet hire) Barford Dump truck (dry hire) $90 / hr $1500 / week CONDITIONS All consumables during hire period are paid by the hirer Cleaning fee of $50.00 applies when equipment off hired and returned Diesel refuelling fee apply at $2.50 / L Each way Float applies to all dry hire Any damage caused will be charged at cost + 15% to repair
S WATER CART MODEL 2000L S Type: Standard trailer - no lights, reflectors or brakes Fitted with LED lights, reflectors, brakes and compliance plate - to ADR standards Chassis: Fully welded RHS steel - hot dip galvanised, chequer plate mudguards Running gear Brakes: Towing: Aggregate 3000 kg trailer mass (agm) Dual, 45mm square, mounted over 6 leaf springs 15 x 7 Steel rims, 6 stud Landcruiser hub pattern Brand new, All Terrain Light Truck, 6 ply radial tyres, 31 x 10.50R15. Electrically operated 10 drum brakes with safety breakaway & handbrake 50mm Ball Hitch, 7 pin flat trailer plug, safety chain (rated) Water cart (hire) Water cart (Delivery) $800 / week $275 / each way CONDITIONS All consumables during hire period are paid by the hirer Cleaning fee of $50.00 applies when equipment off hired and returned Diesel refuelling fee apply at $2.50 / L Each way Float applies to all dry hire Any damage caused will be charged at cost + 15% to repair
S Hino 2 tonne Tipper Bogie Tipper Truck & Trailer MACHINE DELIVERY $70 / hr $95 / hr $145 / hr Note: minimum 4 hour hire + 1 hour travel PLUS tolls if applicable. 4.5 tonne $275 8 tonne $350 12 tonne $400 20 tonne $600 24 tonne $650 30 tonne $850 Note: rates apply to Sydney metropolitan area only. Rates for delivery outside Sydney metropolitan area are calculated on an individual basis. ATTACHMENT DELIVERY Floats are charged each way for 2 days or less, one float for 3 days or more. Each float allows for the machine with two buckets only. Each additional attachment required to be delivered to site attracts an additional charge of $275.00. MINIMUM HIRE/STAND DOWN Each machine has a minimum hire of 8 hours of the General Bucket hourly rate on the first day on a site. Each machine has a minimum hire of 4 hours of the General Bucket hourly rate on the last day on a site. If a machine is stood down by the client for reasons other than inclement weather then the client will incur a minimum hire of 4 hours of that particular machine s General Bucket hourly rate for each day it is stood down. Day rates for specialist attachments apply to an 8 hour day, any extra over use will be charged at hourly rate. Geoff or Rick Davis must be notified by either phone on 02 9486 4555 or email at geoff@northerngroup.com.au or rick@northerngroup.com.au to arrange all equipment scheduling with as much advance notice as possible.